Merge branch 'development' of https://github.com/arendst/Sonoff-Tasmota into development

2019-03-19 19:32:38 +01:00 · 2019-03-19 19:32:38 +01:00 · 08fd8d5442
parent c537b485a3 83188c926c
commit 08fd8d5442
52 changed files with 535 additions and 555 deletions
--- a/README.md
+++ b/README.md
@ -18,7 +18,7 @@ See [RELEASENOTES.md](https://github.com/arendst/Sonoff-Tasmota/blob/development
 In addition to the [release webpage](https://github.com/arendst/Sonoff-Tasmota/releases/latest) the binaries can also be OTA downloaded from http://thehackbox.org/tasmota/release/

 ### Development
-[![Dev Version](https://img.shields.io/badge/development%20version-6.4.1.x-blue.svg)](https://github.com/arendst/Sonoff-Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-6.5.0.x-blue.svg)](https://github.com/arendst/Sonoff-Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://thehackbox.org/tasmota/)
 [![Build Status](https://img.shields.io/travis/arendst/Sonoff-Tasmota.svg)](https://travis-ci.org/arendst/Sonoff-Tasmota)

@ -133,9 +133,11 @@ Libraries used with Sonoff-Tasmota are:
 - [C2 Programmer](http://app.cear.ufpb.br/~lucas.hartmann/tag/efm8bb1/)
 - [esp-epaper-29-ws-20171230-gemu](https://github.com/gemu2015/Sonoff-Tasmota/tree/displays/lib)
 - [esp-knx-ip](https://github.com/envy/esp-knx-ip)
+- FrogmoreScd30
 - [I2Cdevlib](https://github.com/jrowberg/i2cdevlib)
 - [IRremoteEsp8266](https://github.com/markszabo/IRremoteESP8266)
 - [JobaTsl2561](https://github.com/joba-1/Joba_Tsl2561)
+- [LinkedList](https://github.com/ivanseidel/LinkedList)
 - [Liquid Cristal](https://github.com/marcoschwartz/LiquidCrystal_I2C)
 - [MultiChannelGasSensor](http://wiki.seeedstudio.com/Grove-Multichannel_Gas_Sensor/)
 - [NeoPixelBus](https://github.com/Makuna/NeoPixelBus)
--- a/RELEASENOTES.md
+++ b/RELEASENOTES.md
@ -7,16 +7,14 @@ See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade
 4. Migrate to **Sonoff-Tasmota 6.x**

 ## Release notes
+### Core version 2.3.0 vs 2.4.2
+This release is based on ESP8266/Arduino library core 2.3.0 (again) as some people encountered wifi related issues on core 2.4.2. For others core 2.4.2 is working just fine. Both version are available from http://thehackbox.org/tasmota/release/
+
 ### Change in default initial configuration tool
 Firmware binary **sonoff-classic.bin** supports **WifiManager, Wps and SmartConfig** for initial configuration. The default tool is **Wps**.

 To save memory space all other binaries support **WifiManager only**.

-See _changelog.ino how to enable them again.
- Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured.
- If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used.
- While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in my_user_config.h the compiler will check for define USE_WPS and if not enabled WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible.
-
 ## Supported Modules
 The following hardware modules are supported.

@ -82,180 +80,203 @@ Module            | Description
 58 PS-16-DZ       | PS-16-DZ  Wifi dimmer for Incandescent Lights and Led
 59 Teckin US      | Teckin US and ZooZee SA102 Wifi Smart Switch with Energy Monitoring
 60 Manzoku strip  | Manzoku Wifi Smart Power Strip with four Relays
+61 OBI Socket 2   | OBI 2 Wifi Smart Socket
+62 YTF IR Bridge  | YTF Infra Red Wifi Bridge
+63 Digoo DG-SP202 | Digoo DG-SP202 Dual Wifi Smart Switch with Energy Monitoring
+64 KA10           | Smanergy KA10 Wifi Smart Wall Switch with Energy Monitoring
+65 Luminea ZX2820 | Luminea ZX2820 Wifi Smart Switch with Energy Monitoring
+66 Mi Desk Lamp   | Mi Desk Lamp with rotary switch and Wifi
+67 SP10           | Tuya SP10 Wifi Smart Switch with Energy Monitoring
+68 WAGA CHCZ02MB  | WAGA life CHCZ02MB Wifi Smart Switch with Energy Monitoring
+69 SYF05          | Sunyesmart SYF05 RGBWW Wifi Led Bulb

 ## Provided Binary Downloads
-The following binary downloads have been compiled with ESP8266/Arduino library core version **2.4.2** patched with the Alexa fix.
+The following binary downloads have been compiled with ESP8266/Arduino library core version **2.3.0**.

- **sonoff-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**.
- **sonoff-classic.bin** = The Classic version allows **initial installation** using either WifiManager, Wps or SmartConfig.
- **sonoff.bin** = The Sonoff version without Wps and SmartConfig configuration but adds more sensors.
+- **sonoff.bin** = The Sonoff version without Wps and SmartConfig configuration but adds more sensors. **RECOMMENDED RELEASE BINARY**
+- **sonoff-basic.bin** = The Basic version without Wps and SmartConfig configuration and most sensors.
+- **sonoff-classic.bin** = The Classic version allows initial installation using either WifiManager, Wps or SmartConfig.
 - **sonoff-BG.bin** to **sonoff-TW.bin** = The Sonoff version without Wps and SmartConfig configuration in different languages.
- **sonoff-sensors.bin** = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors.
- **sonoff-display.bin** = The Display version without Wps and SmartConfig configuration but adds display support.
 - **sonoff-knx.bin** = The Knx version without Wps and SmartConfig configuration and some other features but adds KNX support.
+- **sonoff-sensors.bin** = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors.
+- **sonoff-display.bin** = The Display version without Wps and SmartConfig configuration and Energy Monitoring but adds display support.
+- **sonoff-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**.
+
+Core version **2.4.2** binaries can be found at http://thehackbox.org/tasmota/release/020402/

 ### Available Features and Sensors

-| Feature or Sensor              | minimal | basic | classic | sonoff | knx  | sensors | Remarks
-|--------------------------------|---------|-------|---------|--------|------|---------|--------
-| ESP/Arduino lib v2.3.0         | 346k    | 429k  | 482k    | 504k   | 522k | 535k    |
-| ESP/Arduino lib v2.4.2         | 366k    | 446k  | 496k    | 522k   | 538k | 551k    | No wifi sleep
-|                                |   |   |   |   |   |   |
-| MY_LANGUAGE en-GB              | x | x | x | x | x | x |
-| MQTT_LIBRARY_TYPE PUBSUBCLIENT | x | x | x | x | x | x |
-| USE_WPS                        | - | - | x | - | - | - | WPS
-| USE_SMARTCONFIG                | - | - | x | - | - | - | SmartConfig
-| USE_ARDUINO_OTA                | - | - | - | - | - | - |
-| USE_DOMOTICZ                   | - | - | x | x | x | x |
-| USE_HOME_ASSISTANT             | - | - | - | x | x | x |
-| USE_MQTT_TLS                   | - | - | - | - | - | - |
-| USE_KNX                        | - | - | - | - | x | - |
-| USE_WEBSERVER                  | x | x | x | x | x | x | WifiManager
-| USE_EMULATION                  | - | x | x | x | - | x |
-| USE_DISCOVERY                  | - | - | x | x | x | x |
-| WEBSERVER_ADVERTISE            | - | - | x | x | x | x |
-| MQTT_HOST_DISCOVERY            | - | - | x | x | x | x |
-| USE_TIMERS                     | - | x | - | x | x | x |
-| USE_TIMERS_WEB                 | - | x | - | x | x | x |
-| USE_SUNRISE                    | - | x | - | x | x | x |
-| USE_RULES                      | - | x | - | x | x | x |
-|                                |   |   |   |   |   |
-| USE_ADC_VCC                    | x | x | x | x | x | - |
-| USE_DS18B20                    | - | - | - | - | - | - | Single sensor
-| USE_DS18x20                    | - | - | x | x | x | x | Multiple sensors
-| USE_DS18x20_LEGACY             | - | - | - | - | - | - | Multiple sensors
-|                                |   |   |   |   |   |   |
-| Feature or Sensor              | minimal | basic | classic | sonoff | knx  | sensors |
-| USE_I2C                        | - | - | - | x | x | x |
-| USE_SHT                        | - | - | - | x | x | x |
-| USE_HTU                        | - | - | - | x | x | x |
-| USE_BMP                        | - | - | - | x | x | x |
-| USE_BME680                     | - | - | - | - | - | x |
-| USE_BH1750                     | - | - | - | x | x | x |
-| USE_VEML6070                   | - | - | - | - | - | x |
-| USE_ADS1115                    | - | - | - | - | - | x |
-| USE_ADS1115_I2CDEV             | - | - | - | - | - | - |
-| USE_INA219                     | - | - | - | - | - | x |
-| USE_SHT3X                      | - | - | - | x | x | x |
-| USE_TSL2561                    | - | - | - | - | - | x |
-| USE_MGS                        | - | - | - | - | - | x |
-| USE_SGP30                      | - | - | - | x | x | x |
-| USE_SI1145                     | - | - | - | - | - | x |
-| USE_LM75AD                     | - | - | - | x | x | x |
-| USE_APDS9960                   | - | - | - | - | - | - |
-| USE_MCP230xx                   | - | - | - | - | - | - |
-| USE_PCA9685                    | - | - | - | - | - | - |
-| USE_MPR121                     | - | - | - | - | - | - |
-| USE_CCS811                     | - | - | - | - | - | - |
-| USE_MPU6050                    | - | - | - | - | - | - |
-| USE_DS3231                     | - | - | - | - | - | - |
-| USE_MGC3130                    | - | - | - | - | - | - |
-|                                |   |   |   |   |   |   |
-| Feature or Sensor              | minimal | basic | classic | sonoff | knx  | sensors |
-| USE_SPI                        | - | - | - | - | - | - |
-| USE_MHZ19                      | - | - | - | x | x | x |
-| USE_SENSEAIR                   | - | - | - | x | x | x |
-| USE_PMS5003                    | - | - | - | x | x | x |
-| USE_NOVA_SDS                   | - | - | - | x | x | x |
-| USE_PZEM004T                   | - | - | - | x | x | x |
-| USE_PZEM_AC                    | - | - | - | x | x | x |
-| USE_PZEM_DC                    | - | - | - | x | x | x |
-| USE_MCP39F501                  | - | x | - | x | x | x |
-| USE_SERIAL_BRIDGE              | - | - | - | x | x | x |
-| USE_SDM120                     | - | - | - | - | - | x |
-| USE_SDM630                     | - | - | - | - | - | x |
-| USE_MP3_PLAYER                 | - | - | - | - | - | x |
-| USE_TUYA_DIMMER                | - | x | - | x | x | x |
-| USE_ARMTRONIX_DIMMERS          | - | x | - | x | x | x |
-| USE_PS_16_DZ                   | - | x | - | x | x | x |
-| USE_AZ7798                     | - | - | - | - | - | - |
-| USE_IR_REMOTE                  | - | - | - | x | x | x |
-| USE_IR_HVAC                    | - | - | - | - | - | x |
-| USE_IR_RECEIVE                 | - | - | - | x | x | x |
-| USE_WS2812                     | - | - | x | x | x | x |
-| USE_WS2812_DMA                 | - | - | - | - | - | - |
-| USE_ARILUX_RF                  | - | - | - | x | x | x |
-| USE_SR04                       | - | - | - | x | x | x |
-| USE_TM1638                     | - | - | - | - | - | x |
-| USE_HX711                      | - | - | - | x | x | x |
-| USE_RF_FLASH                   | - | - | - | x | x | x |
-| USE_TX20_WIND_SENSOR           | - | - | - | x | x | x |
-| USE_RC_SWITCH                  | - | - | - | x | x | x |
-| USE_RF_SENSOR                  | - | - | - | - | - | x | AlectoV2 only
-| USE_DISPLAY                    | - | - | - | - | - | - |
+| Feature or Sensor     | minimal | basic | classic | sonoff | knx  | sensors | display | Remarks
+|-----------------------|---------|-------|---------|--------|------|---------|---------|--------
+| MY_LANGUAGE en-GB     | x | x | x | x | x | x | x |
+| USE_WPS               | - | - | x | - | - | - | - | WPS
+| USE_SMARTCONFIG       | - | - | x | - | - | - | - | SmartConfig
+| USE_ARDUINO_OTA       | - | - | - | - | - | - | - |
+| USE_DOMOTICZ          | - | - | x | x | x | x | - |
+| USE_HOME_ASSISTANT    | - | - | - | x | x | x | - |
+| USE_MQTT_TLS          | - | - | - | - | - | - | - |
+| USE_KNX               | - | - | - | - | x | - | - |
+| USE_WEBSERVER         | x | x | x | x | x | x | x | WifiManager
+| USE_EMULATION         | - | x | x | x | - | x | - |
+| USE_DISCOVERY         | - | - | x | x | x | x | x |
+| WEBSERVER_ADVERTISE   | - | - | x | x | x | x | x |
+| MQTT_HOST_DISCOVERY   | - | - | x | x | x | x | x |
+| USE_TIMERS            | - | x | - | x | x | x | x |
+| USE_TIMERS_WEB        | - | x | - | x | x | x | x |
+| USE_SUNRISE           | - | x | - | x | x | x | x |
+| USE_RULES             | - | x | - | x | x | x | x |
+| USE_EXPRESSION        | - | - | - | - | - | - | - |
+|                       |   |   |   |   |   |   |   |
+| USE_ADC_VCC           | x | x | x | x | x | - | x |
+| USE_DS18B20           | - | - | - | - | - | - | - | Single sensor
+| USE_DS18x20           | - | - | x | x | x | x | x | Multiple sensors
+| USE_DS18x20_LEGACY    | - | - | - | - | - | - | - | Multiple sensors
+|                       |   |   |   |   |   |   |   |
+| Feature or Sensor     | minimal | basic | classic | sonoff | knx  | sensors | display | Remarks
+| USE_I2C               | - | - | - | x | x | x | x |
+| USE_SHT               | - | - | - | x | x | x | x |
+| USE_HTU               | - | - | - | x | x | x | x |
+| USE_BMP               | - | - | - | x | x | x | x |
+| USE_BME680            | - | - | - | - | - | x | - |
+| USE_BH1750            | - | - | - | x | x | x | x |
+| USE_VEML6070          | - | - | - | - | - | x | - |
+| USE_ADS1115           | - | - | - | - | - | x | - |
+| USE_ADS1115_I2CDEV    | - | - | - | - | - | - | - |
+| USE_INA219            | - | - | - | - | - | x | - |
+| USE_SHT3X             | - | - | - | x | x | x | x |
+| USE_TSL2561           | - | - | - | - | - | x | - |
+| USE_MGS               | - | - | - | - | - | x | - |
+| USE_SGP30             | - | - | - | x | x | x | x |
+| USE_SI1145            | - | - | - | - | - | - | - |
+| USE_LM75AD            | - | - | - | x | x | x | x |
+| USE_APDS9960          | - | - | - | - | - | - | - |
+| USE_MCP230xx          | - | - | - | - | - | - | - |
+| USE_PCA9685           | - | - | - | - | - | - | - |
+| USE_MPR121            | - | - | - | - | - | - | - |
+| USE_CCS811            | - | - | - | - | - | - | - |
+| USE_MPU6050           | - | - | - | - | - | - | - |
+| USE_DS3231            | - | - | - | - | - | - | - |
+| USE_MGC3130           | - | - | - | - | - | - | - |
+| USE_MAX44009          | - | - | - | - | - | - | - |
+| USE_SCD30             | - | - | - | - | - | x | - |
+|                       |   |   |   |   |   |   |   |
+| Feature or Sensor     | minimal | basic | classic | sonoff | knx  | sensors | display | Remarks
+| USE_SPI               | - | - | - | - | - | - | x |
+| USE_MHZ19             | - | - | - | x | x | x | x |
+| USE_SENSEAIR          | - | - | - | x | x | x | x |
+| USE_PMS5003           | - | - | - | x | x | x | x |
+| USE_NOVA_SDS          | - | - | - | x | x | x | x |
+| USE_ENERGY_SENSOR     | - | x | x | x | x | x | - |
+| USE_PZEM004T          | - | - | - | x | x | x | - |
+| USE_PZEM_AC           | - | - | - | x | x | x | - |
+| USE_PZEM_DC           | - | - | - | x | x | x | - |
+| USE_MCP39F501         | - | x | - | x | x | x | - |
+| USE_SERIAL_BRIDGE     | - | - | - | x | x | x | x |
+| USE_SDM120            | - | - | - | - | - | x | - |
+| USE_SDM630            | - | - | - | - | - | x | - |
+| USE_MP3_PLAYER        | - | - | - | - | - | x | - |
+| USE_TUYA_DIMMER       | - | x | - | x | x | x | x |
+| USE_ARMTRONIX_DIMMERS | - | x | - | x | x | x | x |
+| USE_PS_16_DZ          | - | x | - | x | x | x | x |
+| USE_AZ7798            | - | - | - | - | - | - | - |
+| USE_PN532_HSU         | - | - | - | - | - | x | - |
+| USE_IR_REMOTE         | - | - | - | x | x | x | x |
+| USE_IR_HVAC           | - | - | - | - | - | x | - |
+| USE_IR_RECEIVE        | - | - | - | x | x | x | x |
+| USE_WS2812            | - | - | x | x | x | x | x |
+| USE_WS2812_DMA        | - | - | - | - | - | - | - |
+| USE_ARILUX_RF         | - | - | - | x | x | x | - |
+| USE_SR04              | - | - | - | x | x | x | x |
+| USE_TM1638            | - | - | - | - | - | x | - |
+| USE_HX711             | - | - | - | x | x | x | x |
+| USE_RF_FLASH          | - | - | - | x | x | x | - |
+| USE_TX20_WIND_SENSOR  | - | - | - | x | x | x | x |
+| USE_RC_SWITCH         | - | - | - | x | x | x | x |
+| USE_RF_SENSOR         | - | - | - | - | - | x | - | AlectoV2 only
+| USE_SM16716           | - | x | x | x | x | x | x |
+| USE_DISPLAY           | - | - | - | - | - | - | x |
+| USE_DISPLAY_LCD       | - | - | - | - | - | - | x |
+| USE_DISPLAY_SSD1306   | - | - | - | - | - | - | x |
+| USE_DISPLAY_MATRIX    | - | - | - | - | - | - | x |
+| USE_DISPLAY_ILI9341   | - | - | - | - | - | - | x |
+| USE_DISPLAY_EPAPER_29 | - | - | - | - | - | - | x | Disabled for core 2.3.0

 ## Changelog
-Version 6.4.1 20181225
- * Change RAM usage BMP/BME I2C sensors
- * Change FallbackTopic from cmnd/\<mqttclient\>/ to cmnd/\<mqttclient\>_fb/ to discriminate from Topic (#1528)
- * Change FallbackTopic detection (#4706)
- * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (#4711)
- * Change MQTT GUI password handling (#4723)
- * Fix possible dtostrf buffer overflows by increasing buffers
- * Fix wifi strongest signal detection (#4704)
- * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (#3159, #4712)
- * Add Slovak language file (#4663)
- * Add support for AZ-Instrument 7798 CO2 meter/datalogger (#4672)
- * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (#4673)
- * Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (#4703)
-
-Version 6.4.0 20181217
- * Change GUI Configure Module by using AJAX for data fetch to cut page size (and memory use) by 40%.
-     In case of web page errors clear your browser cache or do Page Reload (F5 or Ctrl+R)
- * Change enforcing flashmode dout but it is still mandatory
- * Change bootcount update (being first) flash write to 10 seconds after restart
- * Change display and epaper drivers
- * Change command WebSend Host header field from IP address to hostname (#4331)
- * Change log buffer size from 512 to 520 to accommodate http sensor data (#4354)
- * Change default WIFI_CONFIG_TOOL from WIFI_WAIT to WIFI_RETRY in my_user_config.h (#4400)
- * Change webgui refresh time delay for Save Settings and local OTA Upload (#4423)
- * Change SR-04 driver to use NewPing library (#4488)
- * Change MCP230xx driver to support interrupt retention over teleperiod (#4547)
- * Change support for MPU6050 using DMP (#4581)
- * Fix unintended function overload of WifiState
- * Fix wifi connection errors using wifi disconnect and ESP.reset instead of ESP.restart
- * Fix Sonoff Pow R2 and Sonoff S31 Serial interface hang caused by Sonoff Basic R2 driver delay implementation (and possibly core bug)
- * Fix MQTT connection error after restart
- * Fix wifi re-scan connection baseline
- * Fix possible strncat buffer overflows
- * Fix intermittent Pzem sensor energy overflow calculation error
- * Fix shelly2 ghost switching caused by lack of pull-up inputs (#4255)
- * Fix hardware serial pin configuration. To keep using hardware serial swap current Rx/Tx pin configuration only (#4280)
- * Fix MqttRetry values above 255 seconds (#4424)
- * Fix WifiManager functionality on initial installation (#4433)
- * Fix ArduinoOTA for Core 2.5.0 (#4620)
- * Add minutes to commands Timezone to allow all possible world timezones
- * Add more strict checks for GPIO selections
- * Add code image and optional commit number to version
- * Add dynamic delay to main loop providing time for wifi background tasks
- * Add additional start-up delay during initial wifi connection
- * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver
- * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 weather stations using 868MHz RF sensor receiver
- * Add user definition of defines WIFI_RSSI_THRESHOLD (default 10) and WIFI_RESCAN_MINUTES (default 44)
- * Add command SetOption58 0/1 to enable IR raw data info in JSON message (#2116)
- * Add command IRSend \<frequency\>|0,\<rawdata1\>,\<rawdata2\>,.. to allow raw data transmission (#2116)
- * Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173)
- * Add command SetOption57 0/1 to enable wifi network re-scan every 44 minutes with a rssi threshold of 10 to select highest RSSI (#3173)
- * Add support for SDM220 (#3610)
- * Add default sleep 1 to sonoff-basic to lower energy consumption (#4217)
- * Add wifi status to Tuya (#4221)
- * Add delays to reduce CPU usage at boot time (#4233)
- * Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241)
- * Add optional hardware serial when GPIO13(Rx) and GPIO15(Tx) are selected removing hardware serial from GPIO01(Tx) and GPIO03(Rx) (#4288)
- * Add support for Gosund SP1 v2.3 Power Socket with Energy Monitoring (#4297)
- * Add support for Armtronix dimmers. See wiki for info (#4321)
- * Add to command WebSend option to send a direct path when command starts with a slash (#4329)
- * Add support for LG HVac and IrRemote (#4377)
- * Add initial support for Hass sensor discovery (#4380)
- * Add support for Fujitsu HVac and IrRemote (#4387)
- * Add support for I2C MGC3130 Electric Field Effect sensor by Christian Baars (#3774, #4404)
- * Add command CalcRes to set number of decimals (0 - 7) used in commands ADD, SUB, MULT and SCALE (#4420)
- * Add CPU average load to state message (#4431)
- * Add command SetOption59 0/1 to change state topic from tele/STATE to stat/RESULT (#4450)
- * Add support for SM Smart Wifi Dimmer PS-16-DZ (#4465)
- * Add support for Teckin US Power Socket with Energy Monitoring (#4481)
- * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497)
- * Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)
- * Add support for GPIO02 for newer Sonoff Basic (#4518)
- * Add Announce Switches to MQTT Discovery (#4531)
- * Add support for Manzoku Power Strip (#4590)
+Version 6.5.0 20190319
+ * Remove commands SetOption14 and SetOption63 as it has been superseded by command Interlock
+ * Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
+ * Remove support for MQTT_LIBRARY_TYPE, MQTT_ARDUINOMQTT and MQTT_TASMOTAMQTT (#5474)
+ * Change webserver content handling from single String to small Chunks increasing RAM
+ * Change code use of boolean to bool and byte to uint8_t
+ * Change code uint8_t flags to bool flags
+ * Change sonoff_template.h layout regarding optional module flags like ADC0
+ * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
+ * Change button driver making it modular
+ * Change switch driver making it modular and introduce input filter (#4665, #4724)
+ * Change switch input detection by optimizing switch debounce (#4724)
+ * Change web authentication (#4865)
+ * Change image name BE_MINIMAL to FIRMWARE_MINIMAL and USE_xyz to FIRMWARE_xyz (#5106)
+ * Change GUI weblog from XML to plain text solving possible empty screens (#5154)
+ * Fix most compiler warnings
+ * Fix Display exception 28 when JSON value is NULL received
+ * Fix epaper driver (#4785)
+ * Fix HAss Sensor Discovery Software Watchdog restart (#4831, #4988)
+ * Fix allowable MAX_RULE_VARS to 16 (#4933)
+ * Fix mDNS addService (#4938, #4951)
+ * Fix HAss discovery of MHZ19(B) sensors (#4992)
+ * Fix some exceptions and watchdogs due to lack of stack space (#5215)
+ * Fix GUI wifi password acception starting with asteriks (*) (#5231, #5242)
+ * Fix command WebSend intermittent results (#5273, #5304)
+ * Fix additional characters in fallbacktopic, hostname and mqttclient on core 2.5.0 (#5359, #5417)
+ * Fix Energy TotalStartTime when commands EnergyReset0 and/or EnergyReset3 used (#5373)
+ * Fix DS18S20 temperature calculation (#5375)
+ * Fix float calculations in range from 0 to -1 (#5386)
+ * Fix exception on GUI Configure Logging and Configure Other (#5424)
+ * Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
+ * Add command SerialDelimiter 128 to filter reception of only characters between ASCII 32 and 127 (#5131)
+ * Add command SSerialSend5 \<hexdata\> to SerialBridge
+ * Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#4910, #5014)
+ * Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371)
+ * Add command WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
+ * Add command SetOption36 to control boot loop default restoration (#4645, #5063)
+ * Add command SetOption37 for RGBCW color mapping (#5326)
+ * Add command SetOption55 0/1 and define MDNS_ENABLE to disable/enable mDNS (#4793, #4923)
+ * Add command SetOption62 0/1 to disable retain on Button or Switch hold messages (#5299)
+ * Add support for Smanergy KA10 Smart Wall Socket with Energy monitoring
+ * Add support for commands in sensor drivers
+ * Add support for MAX31855 K-Type thermocouple sensor using softSPI (#4764)
+ * Add support for Near Field Communication (NFC) controller PN532 using Serial (#4791, #5162)
+ * Add support for OBI Power Socket 2 (#4829)
+ * Add support for YTF IR Bridge (#4855)
+ * Add support for Mi LED Desk Lamp with rotary switch (#4887)
+ * Add support for Digoo DG-SP202 Smart Socket with Energy monitoring (#4891)
+ * Add support for MAX44009 Ambient Light sensor (#4907)
+ * Add support for inverted buttons and inverted buttons without pullup (#4914)
+ * Add support for Luminea ZX2820 Smart Socket with Energy monitoring (#4921)
+ * Add support for multiple ADS1115 I2C devices (#5083)
+ * Add support for online template change using command Template or GUI Configure Other (#5177)
+ * Add support for Korean language translations (#5344)
+ * Add support for sensor SCD30 (#5434)
+ * Add parameter CFG_HOLDER to status 1 message (#5206)
+ * Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
+ * Add Resolution property to Status 3 report providing previous SetOption second value property
+ * Add property MqttCount to status 6 message representing number of Mqtt re-connections
+ * Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
+ * Add property Downtime to state and status 11 message representing the duration of wifi connection loss
+ * Add variable %timestamp% to rules (#4749)
+ * Add rule support for "==", "!=" ">=" and "<=" (#5122)
+ * Add rule expression enabled by define USE_EXPRESSION in my_user_config.h (#5210)
+ * Add Power status functionality to LED2 when configured leaving LED1 for Link status indication
+ * Add user configuration of HLW8012 and HJL-01/BL0937 Energy Monitoring as used in Sonoff Pow and many Tuya based devices
+ * Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
+ * Add online template configuration using both commands and Configure Template menu option in GUI
+ * Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
+ * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
+ * Add button control when no relay configured (#4682)
+ * Add startup delay of 4 seconds to button control (#4829)
+ * Add core version conditional compile options to provided PWM files (#4917)
+ * Add resiliency to saved Settings (#5065)
+ * Add MHZ19 Temperature as Domoticz Temperature selection (#5128)
+ * Add HAss status sensor (#5139)
+ * Add status message to former declined group commands (#5145)
+ * Add 0x to IRRemote (SetOption29) and RCSwitch (SetOption28) received hexadecimal data (#5431)
--- a/sonoff/_changelog.ino
+++ b/sonoff/_changelog.ino
@ -1,141 +1,84 @@
-/* 6.4.2.22 20190315
+/* 6.5.0.1 20190319
+ * Change Web GUI sensor data collection
+ *
+ * 6.5.0 20190319
+ * Remove commands SetOption14 and SetOption63 as it has been superseded by command Interlock
+ * Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
 * Remove support for MQTT_LIBRARY_TYPE, MQTT_ARDUINOMQTT and MQTT_TASMOTAMQTT (#5474)
- *
- * 6.4.1.21 20190309
- * Fix exception on GUI Configure Logging and Configure Other (#5424)
- * Add support for sensor SCD30 (#5434)
- * Add support for commands in sensor drivers
- * Add 0x to IRRemote (SetOption29) and RCSwitch (SetOption28) received hexadecimal data (#5431)
- * Add button control when no relay configured (#4682)
- *
- * 6.4.1.20 20190304
- * Changed webserver content handling from single String to small Chunks increasing RAM
- * Changed logging message handling
+ * Change webserver content handling from single String to small Chunks increasing RAM
+ * Change code use of boolean to bool and byte to uint8_t
+ * Change code uint8_t flags to bool flags
+ * Change sonoff_template.h layout regarding optional module flags like ADC0
+ * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
+ * Change button driver making it modular
+ * Change switch driver making it modular and introduce input filter (#4665, #4724)
+ * Change switch input detection by optimizing switch debounce (#4724)
+ * Change web authentication (#4865)
+ * Change image name BE_MINIMAL to FIRMWARE_MINIMAL and USE_xyz to FIRMWARE_xyz (#5106)
+ * Change GUI weblog from XML to plain text solving possible empty screens (#5154)
+ * Fix most compiler warnings
+ * Fix Display exception 28 when JSON value is NULL received
+ * Fix epaper driver (#4785)
+ * Fix HAss Sensor Discovery Software Watchdog restart (#4831, #4988)
+ * Fix allowable MAX_RULE_VARS to 16 (#4933)
+ * Fix mDNS addService (#4938, #4951)
+ * Fix HAss discovery of MHZ19(B) sensors (#4992)
+ * Fix some exceptions and watchdogs due to lack of stack space (#5215)
+ * Fix GUI wifi password acception starting with asteriks (*) (#5231, #5242)
+ * Fix command WebSend intermittent results (#5273, #5304)
 * Fix additional characters in fallbacktopic, hostname and mqttclient on core 2.5.0 (#5359, #5417)
- * Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371)
- *
- * 6.4.1.19 20190222
- * Add command SetOption37 for RGBCW color mapping (#5326)
- * Add Korean language translations (#5344)
 * Fix Energy TotalStartTime when commands EnergyReset0 and/or EnergyReset3 used (#5373)
 * Fix DS18S20 temperature calculation (#5375)
 * Fix float calculations in range from 0 to -1 (#5386)
- *
- * 6.4.1.18 20190221
- * Fix some exceptions and watchdogs due to lack of stack space - part 1 (#5215)
- * Fix some exceptions and watchdogs due to lack of stack space - part 2
- * Add command SetOption62 0/1 to disable retain on Button or Swith hold messages (#5299)
- * Add option WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
- * Fix command WebSend when using a port number as regression from 6.4.1.17 (#5304)
- *
- * 6.4.1.17 20190214
- * Change template update by removing possibility to add user module config keeping template as defined (#5222)
- * Fix regression from 6.4.1.16 where GPIO9 and GPIO10 connected devices did not work (#5197)
- * Fix GUI wifi password acception starting with asteriks (*) (#5231, #5242)
- * Add rule expression enabled  by define USE_EXPRESSION in my_user_config.h (#5210)
- * Add Configure Template menu option to GUI (#5222)
- * Remove command SetOption62 as it's functionality is replaced by user changing the device template (#5255)
- * Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
- * Add property MqttCount to status 6 message representing number of Mqtt re-connections
- * Add property Downtime to state and status 11 message representing the duration of wifi connection loss
- * Fix command WebSend intermittent results (#5273)
- *
- * 6.4.1.16 20190211
- * Initial support for online template change using command Template or GUI Configure Other (#5177)
- * Add parameter CFG_HOLDER to status 1 message (#5206)
- * Update GUI
- *
- * 6.4.1.15 20190208
- * Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106)
- * Change image names USE_xyz to FIRMWARE_xyz (#5106)
+ * Fix exception on GUI Configure Logging and Configure Other (#5424)
+ * Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
 * Add command SerialDelimiter 128 to filter reception of only characters between ASCII 32 and 127 (#5131)
- * Add status message to former declined group commands (#5145)
- *
- * 6.4.1.14 20190203
- * Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
- * Add Resolution property to Status 3 report providing previous SetOption second value property
- * Fix IR local echo
- * Add user configuration of HLW8012 and HJL-01/BL0937 Energy Monitoring as used in Sonoff S31, Pow Ra and many Tuya based devices
- * Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
- * Add support for multiple ADS1115 I2C devices (#5083)
- * Add rule support for "==", "!=" ">=" and "<=" (#5122)
- * Add Hass status sensor (#5139)
- * Change GUI weblog solving possible empty screens (#5154)
- * Change PN532 support from I2C to Serial for more stability (#5162)
- * Add MHZ19 Temperature as Domoticz Temperature selection (#5128)
- *
- * 6.4.1.13 20190130
+ * Add command SSerialSend5 \<hexdata\> to SerialBridge
+ * Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#4910, #5014)
+ * Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371)
+ * Add command WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
 * Add command SetOption36 to control boot loop default restoration (#4645, #5063)
- * Add resiliency to saved Settings (#5065)
- *
- * 6.4.1.12 20190128
- * Change code use of boolean to bool and byte to uint8_t
- * Change code uint8_t flags to bool flags
- *
- * 6.4.1.11 20190124
- * Remove command SetOption14 as it has been superseded by command Interlock
- * Remove command SetOption63 as it has been superseded by command Interlock
- * Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
- * Add core version conditional compile options to provided PWM files (#4917)
- * Add support for inverted buttons and inverted buttons without pullup (#4914)
- *
- * 6.4.1.10 20190121
- * Fix Hass discovery of MHZ19(B) sensors (#4992)
- * Fix Hass Software Watchdog exception during discovery (#4988)
- * Add support for MAX44009 Ambient Light sensor (#4907)
- *
- * 6.4.1.9 20190115
- * Add support for Mi LED Desk Lamp with rotary switch (#4887)
- * Fix mDNS addService (#4938, #4951)
- * Fix allowable MAX_RULE_VARS to 16 (#4933)
- * Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
- * Add SerialBridge command SSerialSend5 <hexdata>
- *
- * 6.4.1.8 20190107
- * Change sonoff_template.h layout regarding optional module flags like ADC0
- * Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841)
- * Fix Display exception 28 when JSON value is NULL received
- * Fix Home Assistant Sensor Discovery Software Watchdog restart (#4831)
+ * Add command SetOption37 for RGBCW color mapping (#5326)
+ * Add command SetOption55 0/1 and define MDNS_ENABLE to disable/enable mDNS (#4793, #4923)
+ * Add command SetOption62 0/1 to disable retain on Button or Switch hold messages (#5299)
+ * Add support for Smanergy KA10 Smart Wall Socket with Energy monitoring
+ * Add support for commands in sensor drivers
+ * Add support for MAX31855 K-Type thermocouple sensor using softSPI (#4764)
+ * Add support for Near Field Communication (NFC) controller PN532 using Serial (#4791, #5162)
 * Add support for OBI Power Socket 2 (#4829)
 * Add support for YTF IR Bridge (#4855)
- * Change web authentication (#4865)
+ * Add support for Mi LED Desk Lamp with rotary switch (#4887)
 * Add support for Digoo DG-SP202 Smart Socket with Energy monitoring (#4891)
- * Add support for Smanergy KA10 Smart Wall Socket with Energy monitoring
+ * Add support for MAX44009 Ambient Light sensor (#4907)
+ * Add support for inverted buttons and inverted buttons without pullup (#4914)
 * Add support for Luminea ZX2820 Smart Socket with Energy monitoring (#4921)
- * Add define MDNS_ENABLE to control initial mDNS state (#4923)
- * Add split interlock part 1 (#4910)
- *
- * 6.4.1.7 20190106
- * Fix HLW8012, HJL01 and BL0937 based energy sensors low Power (below 10W) measurement regression from 6.4.1.6
- * Add Power status functionality to LED2 when configured leaving LED1 for Link status indication
- * Add no pull-up control to Shelly 2 module (default is pull-up, change GPIO2 to Switch3n for no pull-up) (#4841)
- * Add 4 seconds startup delay to button control (#4829)
- * Change button driver making it modular
- *
- * 6.4.1.6 20190105
- * Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
- *
- * 6.4.1.5 20190103
- * Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
- * Add command SetOption55 0/1 to disable/enable mDNS (#4793)
- *
- * 6.4.1.4 20190101
- * Update Copyright (C) 2019
- * Fix epaper driver (#4785)
- * Add support for Near Field Communication (NFC) controller PN532 using I2C (#4791)
- *
- * 6.4.1.3 20181229
- * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
- * Add support for MAX31855 K-Type thermocouple sensor using softSPI (#4764)
- *
- * 6.4.1.2 20181228
- * Change switch driver making it modular and introduce input filter (#4665, #4724)
- * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
+ * Add support for multiple ADS1115 I2C devices (#5083)
+ * Add support for online template change using command Template or GUI Configure Other (#5177)
+ * Add support for Korean language translations (#5344)
+ * Add support for sensor SCD30 (#5434)
+ * Add parameter CFG_HOLDER to status 1 message (#5206)
+ * Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
+ * Add Resolution property to Status 3 report providing previous SetOption second value property
+ * Add property MqttCount to status 6 message representing number of Mqtt re-connections
+ * Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
+ * Add property Downtime to state and status 11 message representing the duration of wifi connection loss
 * Add variable %timestamp% to rules (#4749)
- *
- * 6.4.1.1 20181224
- * Fix most compiler warnings
- * Change switch input detection by optimizing switch debounce (#4724)
+ * Add rule support for "==", "!=" ">=" and "<=" (#5122)
+ * Add rule expression enabled by define USE_EXPRESSION in my_user_config.h (#5210)
+ * Add Power status functionality to LED2 when configured leaving LED1 for Link status indication
+ * Add user configuration of HLW8012 and HJL-01/BL0937 Energy Monitoring as used in Sonoff Pow and many Tuya based devices
+ * Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
+ * Add online template configuration using both commands and Configure Template menu option in GUI
+ * Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
+ * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
+ * Add button control when no relay configured (#4682)
+ * Add startup delay of 4 seconds to button control (#4829)
+ * Add core version conditional compile options to provided PWM files (#4917)
+ * Add resiliency to saved Settings (#5065)
+ * Add MHZ19 Temperature as Domoticz Temperature selection (#5128)
+ * Add HAss status sensor (#5139)
+ * Add status message to former declined group commands (#5145)
+ * Add 0x to IRRemote (SetOption29) and RCSwitch (SetOption28) received hexadecimal data (#5431)
 *
 * 6.4.1 20181224
 * Change RAM usage BMP/BME I2C sensors
--- a/sonoff/i18n.h
+++ b/sonoff/i18n.h
@ -561,19 +561,19 @@ const char kOptionBlinkOff[] PROGMEM = "BLINKOFF|" D_BLINKOFF ;

 // xdrv_02_webserver.ino
 #ifdef USE_WEBSERVER
-const char HTTP_SNS_TEMP[] PROGMEM = "%s{s}%s " D_TEMPERATURE "{m}%s&deg;%c{e}";                             // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_HUM[] PROGMEM = "%s{s}%s " D_HUMIDITY "{m}%s%%{e}";                                      // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_PRESSURE[] PROGMEM = "%s{s}%s " D_PRESSURE "{m}%s %s{e}";                                // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_SEAPRESSURE[] PROGMEM = "%s{s}%s " D_PRESSUREATSEALEVEL "{m}%s %s{e}";                   // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_ANALOG[] PROGMEM = "%s{s}%s " D_ANALOG_INPUT "%d{m}%d{e}";                               // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_ILLUMINANCE[] PROGMEM = "%s{s}%s " D_ILLUMINANCE "{m}%d " D_UNIT_LUX "{e}";              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_TEMP[] PROGMEM = "{s}%s " D_TEMPERATURE "{m}%s&deg;%c{e}";                             // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_HUM[] PROGMEM = "{s}%s " D_HUMIDITY "{m}%s%%{e}";                                      // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_PRESSURE[] PROGMEM = "{s}%s " D_PRESSURE "{m}%s %s{e}";                                // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_SEAPRESSURE[] PROGMEM = "{s}%s " D_PRESSUREATSEALEVEL "{m}%s %s{e}";                   // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_ANALOG[] PROGMEM = "{s}%s " D_ANALOG_INPUT "%d{m}%d{e}";                               // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_ILLUMINANCE[] PROGMEM = "{s}%s " D_ILLUMINANCE "{m}%d " D_UNIT_LUX "{e}";              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>

 #if defined(USE_MHZ19) || defined(USE_SENSEAIR) || defined(USE_AZ7798) || defined(USE_SCD30)
-const char HTTP_SNS_CO2[] PROGMEM = "%s{s}%s " D_CO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}";                // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_CO2[] PROGMEM = "{s}%s " D_CO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}";                // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_MHZ19

 #if defined(USE_SCD30)
-const char HTTP_SNS_CO2EAVG[] PROGMEM = "%s{s}%s " D_ECO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}";           // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_CO2EAVG[] PROGMEM = "{s}%s " D_ECO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}";           // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_SCD30

 const char S_MAIN_MENU[] PROGMEM = D_MAIN_MENU;
--- a/sonoff/language/he-HE.h
+++ b/sonoff/language/he-HE.h
@ -54,7 +54,7 @@
 #define D_ADMIN "מנהל"
 #define D_AIR_QUALITY "איכות אוויר"
 #define D_AP "AP"                    // Access Point
-#define D_AS "as"
+#define D_AS "-כ"
 #define D_AUTO "אוטומטי"
 #define D_BLINK "מהבהב"
 #define D_BLINKOFF "כיבוי היבהוב"
@ -62,11 +62,11 @@
 #define D_BRIGHTLIGHT "בהירות"
 #define D_BSSID "BSSId"
 #define D_BUTTON "לחצן"
-#define D_BY "ע"                    // Written by me
+#define D_BY "על ידי"                    // Written by me
 #define D_BYTES "בייט"
 #define D_CELSIUS "צלזיוס"
 #define D_CHANNEL "ערוץ"
-#define D_CO2 "Carbon dioxide"
+#define D_CO2 "פחמן דו חמצני"
 #define D_CODE "קוד"                // Button code
 #define D_COLDLIGHT "אור קר"
 #define D_COMMAND "פקודה"
@ -112,7 +112,7 @@
 #define D_LWT "LWT"
 #define D_MODULE "מודול"
 #define D_MQTT "MQTT"
-#define D_MULTI_PRESS "multi-press"
+#define D_MULTI_PRESS "לחיצה מרובה"
 #define D_NOISE "רעש"
 #define D_NONE "כלום"
 #define D_OFF "כבוי"
@ -132,7 +132,7 @@
 #define D_PROGRAM_FLASH_SIZE "גודל תוכנית פלאש"
 #define D_PROGRAM_SIZE "גודל תוכנית"
 #define D_PROJECT "פרויקט"
-#define D_RAIN "Rain"
+#define D_RAIN "גשם"
 #define D_RECEIVED "התקבל"
 #define D_RESTART "איתחול"
 #define D_RESTARTING "הפעלה מחדש"
@ -203,14 +203,14 @@
 #define D_IN_MODE "במצב"
 #define D_CONNECT_FAILED_NO_IP_ADDRESS "IP החיבור נכשל מכיוון שלא התקבלה כתובת"
 #define D_CONNECT_FAILED_AP_NOT_REACHED "זמין AP החיבור נכשל כיוון שאין"
-#define D_CONNECT_FAILED_WRONG_PASSWORD "Connect failed with AP incorrect password"
-#define D_CONNECT_FAILED_AP_TIMEOUT "Connect failed with AP timeout"
-#define D_ATTEMPTING_CONNECTION "Attempting connection..."
-#define D_CHECKING_CONNECTION "Checking connection..."
-#define D_QUERY_DONE "Query done. MQTT services found"
-#define D_MQTT_SERVICE_FOUND "MQTT service found on"
-#define D_FOUND_AT "found at"
-#define D_SYSLOG_HOST_NOT_FOUND "Syslog Host not found"
+#define D_CONNECT_FAILED_WRONG_PASSWORD "סיסמא שגויה , AP חיבור נכשל ל"
+#define D_CONNECT_FAILED_AP_TIMEOUT "פג זמן המתנה , AP חיבור נכשל ל"
+#define D_ATTEMPTING_CONNECTION "...מנסה להתחבר"
+#define D_CHECKING_CONNECTION "...בודק חיבור"
+#define D_QUERY_DONE "MQTT השאילתה נעשתה. נמצאו שירותי"
+#define D_MQTT_SERVICE_FOUND "MQTT נמצאו שירותי"
+#define D_FOUND_AT "נמצא ב"
+#define D_SYSLOG_HOST_NOT_FOUND "לא נמצא Syslog מארח"

 // settings.ino
 #define D_SAVED_TO_FLASH_AT "נשמר לפלאש ב"
@ -219,7 +219,7 @@
 #define D_ERASED_SECTOR "סקטור מחוק"

 // xdrv_02_webserver.ino
-#define D_NOSCRIPT "JavaScript - כדי להשתמש ב קושחה אסמוטה אנא הפעל"
+#define D_NOSCRIPT "JavaScript - כדי להשתמש בקושחת אסמוטה אנא הפעל"
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "קושחה מינימלית - בבקשה אנא שדרג"
 #define D_WEBSERVER_ACTIVE_ON "שרת ווב פעיל"
 #define D_WITH_IP_ADDRESS "IP עם כתובת"
@ -230,7 +230,7 @@
 #define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager set AccessPoint"
 #define D_TRYING_TO_CONNECT "מנסה לחבר את ההתקן לרשת"

-#define D_RESTART_IN "הפעלה מחדש תןך"
+#define D_RESTART_IN "הפעלה מחדש תוך"
 #define D_SECONDS "שניות"
 #define D_DEVICE_WILL_RESTART "ההתקן יופעל מחדש בעוד מס' שניות"
 #define D_BUTTON_TOGGLE "מצב"
@ -286,12 +286,12 @@
 #define D_MORE_DEBUG "מיפוי נוסף"
 #define D_SYSLOG_HOST "Syslog מארח"
 #define D_SYSLOG_PORT "Syslog פורט"
-#define D_TELEMETRY_PERIOD "Telemetry period"
+#define D_TELEMETRY_PERIOD "זמן שידור"

 #define D_OTHER_PARAMETERS "פרמטרים שונים"
-#define D_TEMPLATE "Template"
-#define D_ACTIVATE "Activate"
-#define D_WEB_ADMIN_PASSWORD "סיסמת מנהל - אתר"
+#define D_TEMPLATE "תבנית"
+#define D_ACTIVATE "הפעל"
+#define D_WEB_ADMIN_PASSWORD "סיסמת מנהל"
 #define D_MQTT_ENABLE "MQTT אפשר"
 #define D_FRIENDLY_NAME "שם ידידותי"
 #define D_BELKIN_WEMO "Belkin WeMo"
@ -374,38 +374,38 @@
 #define D_WEMO_BASIC_EVENT "WeMo basic event"
 #define D_WEMO_EVENT_SERVICE "WeMo event service"
 #define D_WEMO_META_SERVICE "WeMo meta service"
-#define D_WEMO_SETUP "WeMo setup"
-#define D_RESPONSE_SENT "Response sent"
+#define D_WEMO_SETUP "WeMo הגדרת"
+#define D_RESPONSE_SENT "תגובה נשלחה"

 #define D_HUE "Hue"
-#define D_HUE_BRIDGE_SETUP "Hue setup"
+#define D_HUE_BRIDGE_SETUP "Hue הגדרת"
 #define D_HUE_API_NOT_IMPLEMENTED "Hue API not implemented"
 #define D_HUE_API "Hue API"
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 response packets sent"

 // xdrv_07_domoticz.ino
-#define D_DOMOTICZ_PARAMETERS "Domoticz parameters"
+#define D_DOMOTICZ_PARAMETERS "Domoticz פרמטרי"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
 #define D_DOMOTICZ_SWITCH_IDX "Switch idx"
 #define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
-  #define D_DOMOTICZ_TEMP "Temp"
-  #define D_DOMOTICZ_TEMP_HUM "Temp,Hum"
-  #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
-  #define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
-  #define D_DOMOTICZ_ILLUMINANCE "Illuminance"
+  #define D_DOMOTICZ_TEMP "טמפרטורה"
+  #define D_DOMOTICZ_TEMP_HUM "טמפרטורה,לחות"
+  #define D_DOMOTICZ_TEMP_HUM_BARO "טמפרטורה,לחות,ברומטר"
+  #define D_DOMOTICZ_POWER_ENERGY "הספק,צריכה"
+  #define D_DOMOTICZ_ILLUMINANCE "עוצמת אור"
  #define D_DOMOTICZ_COUNT "Count/PM1"
  #define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5"
  #define D_DOMOTICZ_CURRENT "Current/PM10"
-  #define D_DOMOTICZ_AIRQUALITY "AirQuality"
-#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
+  #define D_DOMOTICZ_AIRQUALITY "איכות אוויר"
+#define D_DOMOTICZ_UPDATE_TIMER "עדכן טיימר"

 // xdrv_09_timers.ino
 #define D_CONFIGURE_TIMER "הגדרות תזמון"
 #define D_TIMER_PARAMETERS "פרמטרים עבור תזמון"
 #define D_TIMER_ENABLE "אפשר תזמון"
-#define D_TIMER_ARM "חמש"
+#define D_TIMER_ARM "טען"
 #define D_TIMER_TIME "זמן"
 #define D_TIMER_DAYS "ימים"
 #define D_TIMER_REPEAT "חזרות"
@ -413,25 +413,25 @@
 #define D_TIMER_ACTION "פעולה"

 // xdrv_10_knx.ino
-#define D_CONFIGURE_KNX "Configure KNX"
-#define D_KNX_PARAMETERS "KNX Parameters"
-#define D_KNX_GENERAL_CONFIG "General"
-#define D_KNX_PHYSICAL_ADDRESS "Physical Address"
+#define D_CONFIGURE_KNX "KNX הגדר"
+#define D_KNX_PARAMETERS "KNX פרמטרי"
+#define D_KNX_GENERAL_CONFIG "כללי"
+#define D_KNX_PHYSICAL_ADDRESS "כתובת פיזית"
 #define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )"
-#define D_KNX_ENABLE "Enable KNX"
-#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses"
-#define D_ADD "Add"
-#define D_DELETE "Delete"
-#define D_REPLY "Reply"
-#define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from"
+#define D_KNX_ENABLE "KNX אפשר"
+#define D_KNX_GROUP_ADDRESS_TO_WRITE "נתונים לשליחה אל כתובות קבוצתיות"
+#define D_ADD "הוסף"
+#define D_DELETE "מחק"
+#define D_REPLY "השב"
+#define D_KNX_GROUP_ADDRESS_TO_READ "כתובות קבוצתיות לקבלת נתונים מ"
 #define D_LOG_KNX "KNX: "
-#define D_RECEIVED_FROM "Received from"
-#define D_KNX_COMMAND_WRITE "Write"
-#define D_KNX_COMMAND_READ "Read"
-#define D_KNX_COMMAND_OTHER "Other"
-#define D_SENT_TO "sent to"
+#define D_RECEIVED_FROM "התקבל מאת"
+#define D_KNX_COMMAND_WRITE "כתיבה"
+#define D_KNX_COMMAND_READ "קריאה"
+#define D_KNX_COMMAND_OTHER "אחר"
+#define D_SENT_TO "נשלח ל"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
-#define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_ENHANCEMENT "שיפור התקשורת"
 #define D_KNX_TX_SLOT "KNX TX"
 #define D_KNX_RX_SLOT "KNX RX"

@ -459,7 +459,7 @@
 // xsns_18_pms5003.ino
 #define D_STANDARD_CONCENTRATION "CF-1 PM"     // Standard Particle CF-1 Particle Matter
 #define D_ENVIRONMENTAL_CONCENTRATION "PM"     // Environmetal Particle Matter
-#define D_PARTICALS_BEYOND "Particals"
+#define D_PARTICALS_BEYOND "חלקיקים"

 // xsns_32_mpu6050.ino
 #define D_AX_AXIS "Accel. X-Axis"
@ -483,10 +483,10 @@
 #define D_CALIBRATION "כיול"

 //xsns_35_tx20.ino
-#define D_TX20_WIND_DIRECTION "Wind Direction"
-#define D_TX20_WIND_SPEED "Wind Speed"
-#define D_TX20_WIND_SPEED_AVG "Wind Speed Avg"
-#define D_TX20_WIND_SPEED_MAX "Wind Speed Max"
+#define D_TX20_WIND_DIRECTION "כיוון הרוח"
+#define D_TX20_WIND_SPEED "מהירות הרוח"
+#define D_TX20_WIND_SPEED_AVG "מהירות הרוח ממוצעת"
+#define D_TX20_WIND_SPEED_MAX "מהירות הרוח מקסימלית"
 #define D_TX20_NORTH "N"
 #define D_TX20_EAST "E"
 #define D_TX20_SOUTH "S"
--- a/sonoff/sonoff.h
+++ b/sonoff/sonoff.h
@ -252,7 +252,7 @@ enum LightSchemes {LS_POWER, LS_WAKEUP, LS_CYCLEUP, LS_CYCLEDN, LS_RANDOM, LS_MA

 enum XsnsFunctions {FUNC_SETTINGS_OVERRIDE, FUNC_MODULE_INIT, FUNC_PRE_INIT, FUNC_INIT,
                    FUNC_LOOP, FUNC_EVERY_50_MSECOND, FUNC_EVERY_100_MSECOND, FUNC_EVERY_200_MSECOND, FUNC_EVERY_250_MSECOND, FUNC_EVERY_SECOND,
-                    FUNC_PREP_BEFORE_TELEPERIOD, FUNC_JSON_APPEND, FUNC_WEB_APPEND, FUNC_SAVE_BEFORE_RESTART, FUNC_COMMAND, FUNC_COMMAND_SENSOR, FUNC_COMMAND_DRIVER,
+                    FUNC_PREP_BEFORE_TELEPERIOD, FUNC_JSON_APPEND, FUNC_WEB_SENSOR, FUNC_SAVE_BEFORE_RESTART, FUNC_COMMAND, FUNC_COMMAND_SENSOR, FUNC_COMMAND_DRIVER,
                    FUNC_MQTT_SUBSCRIBE, FUNC_MQTT_INIT, FUNC_MQTT_DATA,
                    FUNC_SET_POWER, FUNC_SET_DEVICE_POWER, FUNC_SHOW_SENSOR,
                    FUNC_RULES_PROCESS, FUNC_SERIAL, FUNC_FREE_MEM, FUNC_BUTTON_PRESSED,
--- a/sonoff/sonoff_post.h
+++ b/sonoff/sonoff_post.h
@ -245,7 +245,9 @@ void KNX_CB_Action(message_t const &msg, void *arg);

 #define USE_SPI                               // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)
    #define USE_DISPLAY_ILI9341               // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
+#ifndef ARDUINO_ESP8266_RELEASE_2_3_0         // There is not enough spare RAM with core 2.3.0 to support the following
    #define USE_DISPLAY_EPAPER_29             // [DisplayModel 5] Enable e-paper 2.9 inch display (+19k code)
+#endif

 #undef USE_ARILUX_RF                          // Remove support for Arilux RF remote controller (-0k8 code, 252 iram (non 2.3.0))
 #undef USE_RF_FLASH                           // Remove support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (-3k code)
--- a/sonoff/sonoff_version.h
+++ b/sonoff/sonoff_version.h
@ -20,7 +20,7 @@
 #ifndef _SONOFF_VERSION_H_
 #define _SONOFF_VERSION_H_

-#define VERSION            0x06040116
+#define VERSION            0x06050001

 #define D_PROGRAMNAME      "Sonoff-Tasmota"
 #define D_AUTHOR           "Theo Arends"
--- a/sonoff/xdrv_01_webserver.ino
+++ b/sonoff/xdrv_01_webserver.ino
@ -376,7 +376,6 @@ const char HTTP_COUNTER[] PROGMEM =
  "<br/><div id='t' name='t' style='text-align:center;'></div>";

 const char HTTP_END[] PROGMEM =
-  "<br/>"
  "<div style='text-align:right;font-size:11px;'><hr/><a href='" D_WEBLINK "' target='_blank' style='color:#aaa;'>" D_PROGRAMNAME " %s " D_BY " " D_AUTHOR "</a></div>"
  "</div>"
  "</body>"
@ -629,13 +628,9 @@ void WSContentFlush()
  }
 }

-void WSContentSend_P(const char* formatP, ...)     // Content send snprintf_P char data
+void _WSContentSendBuffer(void)
 {
-  // This uses char strings. Be aware of sending %% if % is needed
-  va_list arg;
-  va_start(arg, formatP);
-  int len = vsnprintf_P(mqtt_data, sizeof(mqtt_data), formatP, arg);
-  va_end(arg);
+  int len = strlen(mqtt_data);

  if (0 == len) {                                  // No content
    return;
@ -656,6 +651,36 @@ void WSContentSend_P(const char* formatP, ...)     // Content send snprintf_P ch
  }
 }

+void WSContentSend_P(const char* formatP, ...)     // Content send snprintf_P char data
+{
+  // This uses char strings. Be aware of sending %% if % is needed
+  va_list arg;
+  va_start(arg, formatP);
+  vsnprintf_P(mqtt_data, sizeof(mqtt_data), formatP, arg);
+  va_end(arg);
+
+  _WSContentSendBuffer();
+}
+
+void WSContentSend_PD(const char* formatP, ...)    // Content send snprintf_P char data checked for decimal separator
+{
+  // This uses char strings. Be aware of sending %% if % is needed
+  va_list arg;
+  va_start(arg, formatP);
+  int len = vsnprintf_P(mqtt_data, sizeof(mqtt_data), formatP, arg);
+  va_end(arg);
+
+  if (D_DECIMAL_SEPARATOR[0] != '.') {
+    for (int i = 0; i < len; i++) {
+      if ('.' == mqtt_data[i]) {
+        mqtt_data[i] = D_DECIMAL_SEPARATOR[0];
+      }
+    }
+  }
+
+  _WSContentSendBuffer();
+}
+
 void WSContentStart_P(const char* title, bool auth)
 {
  if (auth && (Settings.web_password[0] != 0) && !WebServer->authenticate(WEB_USERNAME, Settings.web_password)) {
@ -940,20 +965,11 @@ bool HandleRootStatusRefresh(void)
    ExecuteWebCommand(svalue, SRC_WEBGUI);
  }

-  mqtt_data[0] = '\0';
-  XsnsCall(FUNC_WEB_APPEND);
-  if (D_DECIMAL_SEPARATOR[0] != '.') {
-    for (uint16_t i = 0; i < strlen(mqtt_data); i++) {
-      if ('.' == mqtt_data[i]) {
-        mqtt_data[i] = D_DECIMAL_SEPARATOR[0];
-      }
-    }
-  }
-  char stemp[strlen(mqtt_data) +1];
-  memcpy(stemp, mqtt_data, sizeof(stemp));
-
  WSContentBegin(200, CT_HTML);
-  WSContentSend_P(PSTR("{t}%s</table>"), stemp);
+  WSContentSend_P(PSTR("{t}"));
+  XsnsCall(FUNC_WEB_SENSOR);
+  WSContentSend_P(PSTR("</table>"));
+
  if (devices_present) {
    WSContentSend_P(PSTR("{t}<tr>"));
    uint8_t fsize = (devices_present < 5) ? 70 - (devices_present * 8) : 32;
--- a/sonoff/xdrv_03_energy.ino
+++ b/sonoff/xdrv_03_energy.ino
@ -548,20 +548,20 @@ void EnergySnsInit(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_ENERGY_SNS1[] PROGMEM = "%s"
+const char HTTP_ENERGY_SNS1[] PROGMEM =
  "{s}" D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"
  "{s}" D_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"
  "{s}" D_POWERUSAGE "{m}%s " D_UNIT_WATT "{e}";

-const char HTTP_ENERGY_SNS2[] PROGMEM = "%s"
+const char HTTP_ENERGY_SNS2[] PROGMEM =
  "{s}" D_POWERUSAGE_APPARENT "{m}%s " D_UNIT_VA "{e}"
  "{s}" D_POWERUSAGE_REACTIVE "{m}%s " D_UNIT_VAR "{e}"
  "{s}" D_POWER_FACTOR "{m}%s{e}";

-const char HTTP_ENERGY_SNS3[] PROGMEM = "%s"
+const char HTTP_ENERGY_SNS3[] PROGMEM =
  "{s}" D_FREQUENCY "{m}%s " D_UNIT_HERTZ "{e}";

-const char HTTP_ENERGY_SNS4[] PROGMEM = "%s"
+const char HTTP_ENERGY_SNS4[] PROGMEM =
  "{s}" D_ENERGY_TODAY  "{m}%s " D_UNIT_KILOWATTHOUR "{e}"
  "{s}" D_ENERGY_YESTERDAY "{m}%s " D_UNIT_KILOWATTHOUR "{e}"
  "{s}" D_ENERGY_TOTAL "{m}%s " D_UNIT_KILOWATTHOUR "{e}";      // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
@ -666,12 +666,12 @@ void EnergyShow(bool json)
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_ENERGY_SNS1, mqtt_data, voltage_chr, current_chr, active_power_chr);
+    WSContentSend_PD(HTTP_ENERGY_SNS1, voltage_chr, current_chr, active_power_chr);
    if (!energy_type_dc) {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_ENERGY_SNS2, mqtt_data, apparent_power_chr, reactive_power_chr, power_factor_chr);
-      if (!isnan(energy_frequency)) { snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_ENERGY_SNS3, mqtt_data, frequency_chr); }
+      WSContentSend_PD(HTTP_ENERGY_SNS2, apparent_power_chr, reactive_power_chr, power_factor_chr);
+      if (!isnan(energy_frequency)) { WSContentSend_PD(HTTP_ENERGY_SNS3, frequency_chr); }
    }
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_ENERGY_SNS4, mqtt_data, energy_daily_chr, energy_yesterday_chr, energy_total_chr);
+    WSContentSend_PD(HTTP_ENERGY_SNS4, energy_daily_chr, energy_yesterday_chr, energy_total_chr);
 #endif  // USE_WEBSERVER
  }
 }
@ -722,7 +722,7 @@ bool Xsns03(uint8_t function)
        EnergyShow(true);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        EnergyShow(false);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_01_counter.ino
+++ b/sonoff/xsns_01_counter.ino
@ -86,7 +86,7 @@ void CounterInit(void)

 #ifdef USE_WEBSERVER
 const char HTTP_SNS_COUNTER[] PROGMEM =
-  "%s{s}" D_COUNTER "%d{m}%s%s{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}" D_COUNTER "%d{m}%s%s{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_WEBSERVER

 void CounterShow(bool json)
@ -121,7 +121,7 @@ void CounterShow(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_COUNTER, mqtt_data, i +1, counter, (bitRead(Settings.pulse_counter_type, i)) ? " " D_UNIT_SECOND : "");
+        WSContentSend_PD(HTTP_SNS_COUNTER, i +1, counter, (bitRead(Settings.pulse_counter_type, i)) ? " " D_UNIT_SECOND : "");
 #endif  // USE_WEBSERVER
      }
    }
@ -152,7 +152,7 @@ bool Xsns01(uint8_t function)
      CounterShow(1);
      break;
 #ifdef USE_WEBSERVER
-    case FUNC_WEB_APPEND:
+    case FUNC_WEB_SENSOR:
      CounterShow(0);
      break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_02_analog.ino
+++ b/sonoff/xsns_02_analog.ino
@ -58,7 +58,7 @@ void AdcShow(bool json)
    snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"ANALOG\":{\"A0\":%d}"), mqtt_data, analog);
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ANALOG, mqtt_data, "", 0, analog);
+    WSContentSend_PD(HTTP_SNS_ANALOG, "", 0, analog);
 #endif  // USE_WEBSERVER
  }
 }
@ -82,7 +82,7 @@ bool Xsns02(uint8_t function)
        AdcShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        AdcShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_04_snfsc.ino
+++ b/sonoff/xsns_04_snfsc.ino
@ -105,7 +105,7 @@ void SonoffScSerialInput(char *rcvstat)

 #ifdef USE_WEBSERVER
 const char HTTP_SNS_SCPLUS[] PROGMEM =
-  "%s{s}" D_LIGHT "{m}%d%%{e}{s}" D_NOISE "{m}%d%%{e}{s}" D_AIR_QUALITY "{m}%d%%{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}" D_LIGHT "{m}%d%%{e}{s}" D_NOISE "{m}%d%%{e}{s}" D_AIR_QUALITY "{m}%d%%{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_WEBSERVER

 void SonoffScShow(bool json)
@ -140,9 +140,9 @@ void SonoffScShow(bool json)

 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "", temperature, TempUnit());
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, "", humidity);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SCPLUS, mqtt_data, sc_value[2], sc_value[3], sc_value[4]);
+      WSContentSend_PD(HTTP_SNS_TEMP, "", temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_HUM, "", humidity);
+      WSContentSend_PD(HTTP_SNS_SCPLUS, sc_value[2], sc_value[3], sc_value[4]);
 #endif  // USE_WEBSERVER
    }
  }
@ -165,7 +165,7 @@ bool Xsns04(uint8_t function)
        SonoffScShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        SonoffScShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_05_ds18b20.ino
+++ b/sonoff/xsns_05_ds18b20.ino
@ -218,7 +218,7 @@ void Ds18b20Show(bool json)
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, ds18b20_types, temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_TEMP, ds18b20_types, temperature, TempUnit());
 #endif  // USE_WEBSERVER
    }
  }
@ -241,7 +241,7 @@ bool Xsns05(uint8_t function)
        Ds18b20Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Ds18b20Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_05_ds18x20.ino
+++ b/sonoff/xsns_05_ds18x20.ino
@ -452,7 +452,7 @@ void Ds18x20Show(bool json)
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, ds18x20_types, temperature, TempUnit());
+        WSContentSend_PD(HTTP_SNS_TEMP, ds18x20_types, temperature, TempUnit());
 #endif  // USE_WEBSERVER
      }
    }
@ -479,7 +479,7 @@ bool Xsns05(uint8_t function)
        Ds18x20Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Ds18x20Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_05_ds18x20_legacy.ino
+++ b/sonoff/xsns_05_ds18x20_legacy.ino
@ -198,7 +198,7 @@ void Ds18x20Show(bool json)
 #ifdef USE_WEBSERVER
      } else {
        snprintf_P(stemp, sizeof(stemp), PSTR("%s-%d"), ds18x20_types, i +1);
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, stemp, temperature, TempUnit());
+        WSContentSend_PD(HTTP_SNS_TEMP, stemp, temperature, TempUnit());
 #endif  // USE_WEBSERVER
      }
    }
@ -233,7 +233,7 @@ bool Xsns05(uint8_t function)
        Ds18x20Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Ds18x20Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_06_dht.ino
+++ b/sonoff/xsns_06_dht.ino
@ -227,8 +227,8 @@ void DhtShow(bool json)
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, Dht[i].stype, temperature, TempUnit());
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, Dht[i].stype, humidity);
+      WSContentSend_PD(HTTP_SNS_TEMP, Dht[i].stype, temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_HUM, Dht[i].stype, humidity);
 #endif  // USE_WEBSERVER
    }
  }
@ -254,7 +254,7 @@ bool Xsns06(uint8_t function)
        DhtShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        DhtShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_07_sht1x.ino
+++ b/sonoff/xsns_07_sht1x.ino
@ -208,8 +208,8 @@ void ShtShow(bool json)
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, sht_types, temperature, TempUnit());
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, sht_types, humidity);
+      WSContentSend_PD(HTTP_SNS_TEMP, sht_types, temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_HUM, sht_types, humidity);
 #endif  // USE_WEBSERVER
    }
  }
@ -236,7 +236,7 @@ bool Xsns07(uint8_t function)
        ShtShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        ShtShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_08_htu21.ino
+++ b/sonoff/xsns_08_htu21.ino
@ -268,8 +268,8 @@ void HtuShow(bool json)
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, htu_types, temperature, TempUnit());
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, htu_types, humidity);
+      WSContentSend_PD(HTTP_SNS_TEMP, htu_types, temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_HUM, htu_types, humidity);
 #endif  // USE_WEBSERVER
    }
  }
@ -295,7 +295,7 @@ bool Xsns08(uint8_t function)
        HtuShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        HtuShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_09_bmp.ino
+++ b/sonoff/xsns_09_bmp.ino
@ -597,19 +597,20 @@ void BmpShow(bool json)

 #ifdef USE_WEBSERVER
      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, name, temperature, TempUnit());
+        WSContentSend_PD(HTTP_SNS_TEMP, name, temperature, TempUnit());
        if (bmp_sensors[bmp_idx].bmp_model >= 2) {
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, name, humidity);
+          WSContentSend_PD(HTTP_SNS_HUM, name, humidity);
        }
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_PRESSURE, mqtt_data, name, pressure, PressureUnit().c_str());
+        WSContentSend_PD(HTTP_SNS_PRESSURE, name, pressure, PressureUnit().c_str());
        if (Settings.altitude != 0) {
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SEAPRESSURE, mqtt_data, name, sea_pressure, PressureUnit().c_str());
+          WSContentSend_PD(HTTP_SNS_SEAPRESSURE, name, sea_pressure, PressureUnit().c_str());
        }
 #ifdef USE_BME680
        if (bmp_sensors[bmp_idx].bmp_model >= 3) {
-          snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s{s}%s " D_GAS "{m}%s " D_UNIT_KILOOHM "{e}"), mqtt_data, name, gas_resistance);
+          WSContentSend_PD(PSTR("{s}%s " D_GAS "{m}%s " D_UNIT_KILOOHM "{e}"), name, gas_resistance);
        }
 #endif  // USE_BME680
+
 #endif  // USE_WEBSERVER
      }
    }
@ -636,7 +637,7 @@ bool Xsns09(uint8_t function)
        BmpShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        BmpShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_10_bh1750.ino
+++ b/sonoff/xsns_10_bh1750.ino
@ -100,7 +100,7 @@ void Bh1750Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ILLUMINANCE, mqtt_data, bh1750_types, bh1750_illuminance);
+      WSContentSend_PD(HTTP_SNS_ILLUMINANCE, bh1750_types, bh1750_illuminance);
 #endif  // USE_WEBSERVER
    }
  }
@ -126,7 +126,7 @@ bool Xsns10(uint8_t function)
        Bh1750Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Bh1750Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_11_veml6070.ino
+++ b/sonoff/xsns_11_veml6070.ino
@ -256,11 +256,11 @@ double Veml6070UvPower(double uvrisk)
 #ifdef USE_WEBSERVER
  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #ifdef USE_VEML6070_SHOW_RAW
-  const char HTTP_SNS_UV_LEVEL[] PROGMEM = "%s{s}VEML6070 " D_UV_LEVEL "{m}%s " D_UNIT_INCREMENTS "{e}";
+  const char HTTP_SNS_UV_LEVEL[] PROGMEM = "{s}VEML6070 " D_UV_LEVEL "{m}%s " D_UNIT_INCREMENTS "{e}";
 #endif  // USE_VEML6070_SHOW_RAW
  // different uv index level texts
-  const char HTTP_SNS_UV_INDEX[] PROGMEM = "%s{s}VEML6070 " D_UV_INDEX " {m}%s %s{e}";
-  const char HTTP_SNS_UV_POWER[] PROGMEM = "%s{s}VEML6070 " D_UV_POWER "{m}%s " D_UNIT_WATT_METER_QUADRAT "{e}";
+  const char HTTP_SNS_UV_INDEX[] PROGMEM = "{s}VEML6070 " D_UV_INDEX "{m}%s %s{e}";
+  const char HTTP_SNS_UV_POWER[] PROGMEM = "{s}VEML6070 " D_UV_POWER "{m}%s " D_UNIT_WATT_METER_QUADRAT "{e}";
 #endif  // USE_WEBSERVER

 /********************************************************************************************/
@ -289,10 +289,10 @@ void Veml6070Show(bool json)
 #ifdef USE_WEBSERVER
    } else {
 #ifdef USE_VEML6070_SHOW_RAW
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_UV_LEVEL, mqtt_data, str_uvlevel);
+      WSContentSend_PD(HTTP_SNS_UV_LEVEL, str_uvlevel);
 #endif  // USE_VEML6070_SHOW_RAW
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_UV_INDEX, mqtt_data, str_uvrisk, str_uvrisk_text);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_UV_POWER, mqtt_data, str_uvpower);
+      WSContentSend_PD(HTTP_SNS_UV_INDEX, str_uvrisk, str_uvrisk_text);
+      WSContentSend_PD(HTTP_SNS_UV_POWER, str_uvpower);
 #endif  // USE_WEBSERVER
    }
  }
@ -319,7 +319,7 @@ bool Xsns11(uint8_t function)
        Veml6070Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Veml6070Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_12_ads1115.ino
+++ b/sonoff/xsns_12_ads1115.ino
@ -203,7 +203,7 @@ void Ads1115toString(uint8_t address)
  snprintf_P(label, sizeof(label), "ADS1115(%02x)", address);

  for (uint8_t i = 0; i < 4; i++) {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ANALOG, mqtt_data, label, i, ads1115_values[i]);
+    WSContentSend_PD(HTTP_SNS_ANALOG, label, i, ads1115_values[i]);
  }
 }

@ -255,7 +255,7 @@ bool Xsns12(uint8_t function)
        Ads1115Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Ads1115Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_12_ads1115_i2cdev.ino
+++ b/sonoff/xsns_12_ads1115_i2cdev.ino
@ -115,7 +115,7 @@ void Ads1115Show(bool json)
        strlcpy(stemp, ",", sizeof(stemp));
 #ifdef USE_WEBSERVER
      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ANALOG, mqtt_data, "ADS1115", i, adc_value);
+        WSContentSend_PD(HTTP_SNS_ANALOG, "ADS1115", i, adc_value);
 #endif  // USE_WEBSERVER
      }
    }
@ -144,7 +144,7 @@ bool Xsns12(uint8_t function)
        Ads1115Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Ads1115Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_13_ina219.ino
+++ b/sonoff/xsns_13_ina219.ino
@ -222,7 +222,7 @@ void Ina219EverySecond(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_SNS_INA219_DATA[] PROGMEM = "%s"
+const char HTTP_SNS_INA219_DATA[] PROGMEM =
  "{s}INA219 " D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"
  "{s}INA219 " D_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"
  "{s}INA219 " D_POWERUSAGE "{m}%s " D_UNIT_WATT "{e}";
@ -250,7 +250,7 @@ void Ina219Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_INA219_DATA, mqtt_data, voltage, current, power);
+      WSContentSend_PD(HTTP_SNS_INA219_DATA, voltage, current, power);
 #endif  // USE_WEBSERVER
    }
  }
@ -281,7 +281,7 @@ bool Xsns13(uint8_t function)
        Ina219Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Ina219Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_14_sht3x.ino
+++ b/sonoff/xsns_14_sht3x.ino
@ -126,8 +126,8 @@ void Sht3xShow(bool json)

 #ifdef USE_WEBSERVER
        } else {
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, types, temperature, TempUnit());
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, types, humidity);
+          WSContentSend_PD(HTTP_SNS_TEMP, types, temperature, TempUnit());
+          WSContentSend_PD(HTTP_SNS_HUM, types, humidity);
 #endif  // USE_WEBSERVER
        }
      }
@ -152,7 +152,7 @@ bool Xsns14(uint8_t function)
        Sht3xShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Sht3xShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_15_mhz19.ino
+++ b/sonoff/xsns_15_mhz19.ino
@ -351,8 +351,8 @@ void MhzShow(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_CO2, mqtt_data, types, mhz_last_ppm);
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, types, temperature, TempUnit());
+    WSContentSend_PD(HTTP_SNS_CO2, types, mhz_last_ppm);
+    WSContentSend_PD(HTTP_SNS_TEMP, types, temperature, TempUnit());
 #endif  // USE_WEBSERVER
  }
 }
@ -382,7 +382,7 @@ bool Xsns15(uint8_t function)
        MhzShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        MhzShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_16_tsl2561.ino
+++ b/sonoff/xsns_16_tsl2561.ino
@ -95,7 +95,7 @@ void Tsl2561EverySecond(void)

 #ifdef USE_WEBSERVER
 const char HTTP_SNS_TSL2561[] PROGMEM =
-  "%s{s}TSL2561 " D_ILLUMINANCE "{m}%u.%03u " D_UNIT_LUX "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}TSL2561 " D_ILLUMINANCE "{m}%u.%03u " D_UNIT_LUX "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_WEBSERVER

 void Tsl2561Show(bool json)
@ -109,7 +109,7 @@ void Tsl2561Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TSL2561, mqtt_data, tsl2561_milliLux / 1000, tsl2561_milliLux % 1000);
+      WSContentSend_PD(HTTP_SNS_TSL2561, tsl2561_milliLux / 1000, tsl2561_milliLux % 1000);
 #endif  // USE_WEBSERVER
    }
  }
@ -135,7 +135,7 @@ bool Xsns16(uint8_t function)
        Tsl2561Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Tsl2561Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_17_senseair.ino
+++ b/sonoff/xsns_17_senseair.ino
@ -159,10 +159,10 @@ void SenseairShow(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_CO2, mqtt_data, senseair_types, senseair_co2);
+    WSContentSend_PD(HTTP_SNS_CO2, senseair_types, senseair_co2);
    if (senseair_type != 2) {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, senseair_types, temperature, TempUnit());
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, senseair_types, humidity);
+      WSContentSend_PD(HTTP_SNS_TEMP, senseair_types, temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_HUM, senseair_types, humidity);
    }
 #endif  // USE_WEBSERVER
  }
@ -188,7 +188,7 @@ bool Xsns17(uint8_t function)
        SenseairShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        SenseairShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_18_pms5003.ino
+++ b/sonoff/xsns_18_pms5003.ino
@ -113,7 +113,7 @@ void PmsInit(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_PMS5003_SNS[] PROGMEM = "%s"
+const char HTTP_PMS5003_SNS[] PROGMEM =
 //  "{s}PMS5003 " D_STANDARD_CONCENTRATION " 1 " D_UNIT_MICROMETER "{m}%d " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}"
 //  "{s}PMS5003 " D_STANDARD_CONCENTRATION " 2.5 " D_UNIT_MICROMETER "{m}%d " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}"
 //  "{s}PMS5003 " D_STANDARD_CONCENTRATION " 10 " D_UNIT_MICROMETER "{m}%d " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}"
@ -145,7 +145,7 @@ void PmsShow(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_PMS5003_SNS, mqtt_data,
+      WSContentSend_PD(HTTP_PMS5003_SNS,
 //        pms_data.pm10_standard, pms_data.pm25_standard, pms_data.pm100_standard,
        pms_data.pm10_env, pms_data.pm25_env, pms_data.pm100_env,
        pms_data.particles_03um, pms_data.particles_05um, pms_data.particles_10um, pms_data.particles_25um, pms_data.particles_50um, pms_data.particles_100um);
@ -174,7 +174,7 @@ bool Xsns18(uint8_t function)
        PmsShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        PmsShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_19_mgs.ino
+++ b/sonoff/xsns_19_mgs.ino
@ -57,7 +57,7 @@ char* measure_gas(int gas_type, char* buffer)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_MGS_GAS[] PROGMEM = "%s{s}MGS %s{m}%s " D_UNIT_PARTS_PER_MILLION "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_MGS_GAS[] PROGMEM = "{s}MGS %s{m}%s " D_UNIT_PARTS_PER_MILLION "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif // USE_WEBSERVER

 void MGSShow(bool json)
@ -74,14 +74,14 @@ void MGSShow(bool json)
    snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"C2H5OH\":%s}"), mqtt_data, measure_gas(C2H5OH, buffer));
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "NH3", measure_gas(NH3, buffer));
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "CO", measure_gas(CO, buffer));
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "NO2", measure_gas(NO2, buffer));
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "C3H8", measure_gas(C3H8, buffer));
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "C4H10", measure_gas(C4H10, buffer));
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "CH4", measure_gas(GAS_CH4, buffer));
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "H2", measure_gas(H2, buffer));
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGS_GAS, mqtt_data, "C2H5OH", measure_gas(C2H5OH, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "NH3", measure_gas(NH3, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "CO", measure_gas(CO, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "NO2", measure_gas(NO2, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "C3H8", measure_gas(C3H8, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "C4H10", measure_gas(C4H10, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "CH4", measure_gas(GAS_CH4, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "H2", measure_gas(H2, buffer));
+    WSContentSend_PD(HTTP_MGS_GAS, "C2H5OH", measure_gas(C2H5OH, buffer));
 #endif // USE_WEBSERVER
  }
 }
@ -107,7 +107,7 @@ bool Xsns19(uint8_t function)
        if (detected) MGSShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        if (detected) MGSShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_20_novasds.ino
+++ b/sonoff/xsns_20_novasds.ino
@ -180,7 +180,7 @@ void NovaSdsInit(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_SDS0X1_SNS[] PROGMEM = "%s"
+const char HTTP_SDS0X1_SNS[] PROGMEM =
  "{s}SDS0X1 " D_ENVIRONMENTAL_CONCENTRATION " 2.5 " D_UNIT_MICROMETER "{m}%s " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}"
  "{s}SDS0X1 " D_ENVIRONMENTAL_CONCENTRATION " 10 " D_UNIT_MICROMETER "{m}%s " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}";      // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_WEBSERVER
@ -204,7 +204,7 @@ void NovaSdsShow(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SDS0X1_SNS, mqtt_data, pm2_5, pm10);
+      WSContentSend_PD(HTTP_SDS0X1_SNS, pm2_5, pm10);
 #endif  // USE_WEBSERVER
    }
  }
@ -230,7 +230,7 @@ bool Xsns20(uint8_t function)
        NovaSdsShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        NovaSdsShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_21_sgp30.ino
+++ b/sonoff/xsns_21_sgp30.ino
@ -63,7 +63,7 @@ void Sgp30Update(void)  // Perform every second to ensure proper operation of th
  }
 }

-const char HTTP_SNS_SGP30[] PROGMEM = "%s"
+const char HTTP_SNS_SGP30[] PROGMEM =
  "{s}SGP30 " D_ECO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}"                // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
  "{s}SGP30 " D_TVOC "{m}%d " D_UNIT_PARTS_PER_BILLION "{e}";

@ -77,7 +77,7 @@ void Sgp30Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SGP30, mqtt_data, sgp.eCO2, sgp.TVOC);
+      WSContentSend_PD(HTTP_SNS_SGP30, sgp.eCO2, sgp.TVOC);
 #endif
    }
  }
@ -100,7 +100,7 @@ bool Xsns21(uint8_t function)
        Sgp30Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Sgp30Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_22_sr04.ino
+++ b/sonoff/xsns_22_sr04.ino
@ -45,7 +45,7 @@ void Sr04Init(void)

 #ifdef USE_WEBSERVER
 const char HTTP_SNS_DISTANCE[] PROGMEM =
-  "%s{s}SR04 " D_DISTANCE "{m}%s" D_UNIT_CENTIMETER "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}SR04 " D_DISTANCE "{m}%s" D_UNIT_CENTIMETER "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_WEBSERVER

 void Sr04Show(bool json)
@ -65,7 +65,7 @@ void Sr04Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_DISTANCE, mqtt_data, distance_chr);
+      WSContentSend_PD(HTTP_SNS_DISTANCE, distance_chr);
 #endif  // USE_WEBSERVER
    }
  }
@ -88,7 +88,7 @@ bool Xsns22(uint8_t function)
        Sr04Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Sr04Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_23_sdm120.ino
+++ b/sonoff/xsns_23_sdm120.ino
@ -260,7 +260,7 @@ void SDM120Init(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_SNS_SDM120_DATA[] PROGMEM = "%s"
+const char HTTP_SNS_SDM120_DATA[] PROGMEM =
  "{s}SDM120 " D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"
  "{s}SDM120 " D_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"
  "{s}SDM120 " D_POWERUSAGE_ACTIVE "{m}%s " D_UNIT_WATT "{e}"
@ -330,9 +330,9 @@ void SDM120Show(bool json)
 #ifdef USE_WEBSERVER
  } else {
 #ifdef USE_SDM220
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SDM120_DATA, mqtt_data, voltage, current, active_power, apparent_power, reactive_power, power_factor, frequency, energy_total, phase_angle,import_active,export_active,import_reactive,export_reactive,total_reactive);
+    WSContentSend_PD(HTTP_SNS_SDM120_DATA, voltage, current, active_power, apparent_power, reactive_power, power_factor, frequency, energy_total, phase_angle,import_active,export_active,import_reactive,export_reactive,total_reactive);
 #else
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SDM120_DATA, mqtt_data, voltage, current, active_power, apparent_power, reactive_power, power_factor, frequency, energy_total);
+    WSContentSend_PD(HTTP_SNS_SDM120_DATA, voltage, current, active_power, apparent_power, reactive_power, power_factor, frequency, energy_total);
 #endif  // USE_SDM220
 #endif  // USE_WEBSERVER
  }
@ -358,7 +358,7 @@ bool Xsns23(uint8_t function)
        SDM120Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        SDM120Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_24_si1145.ino
+++ b/sonoff/xsns_24_si1145.ino
@ -316,7 +316,7 @@ void Si1145Update(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_SNS_SI1145[] PROGMEM = "%s"
+const char HTTP_SNS_SI1145[] PROGMEM =
  "{s}SI1145 " D_ILLUMINANCE "{m}%d " D_UNIT_LUX "{e}"     // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
  "{s}SI1145 " D_INFRARED "{m}%d " D_UNIT_LUX "{e}"
  "{s}SI1145 " D_UV_INDEX "{m}%d.%d{e}";
@ -336,7 +336,7 @@ void Si1145Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SI1145, mqtt_data, visible, infrared, uvindex /100, uvindex %100);
+      WSContentSend_PD(HTTP_SNS_SI1145, visible, infrared, uvindex /100, uvindex %100);
 #endif
    }
  } else {
@ -361,7 +361,7 @@ bool Xsns24(uint8_t function)
        Si1145Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Si1145Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_25_sdm630.ino
+++ b/sonoff/xsns_25_sdm630.ino
@ -257,7 +257,7 @@ void SDM630Init(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_SNS_SDM630_DATA[] PROGMEM = "%s"
+const char HTTP_SNS_SDM630_DATA[] PROGMEM =
  "{s}SDM630 " D_VOLTAGE "{m}%s/%s/%s " D_UNIT_VOLT "{e}"
  "{s}SDM630 " D_CURRENT "{m}%s/%s/%s " D_UNIT_AMPERE "{e}"
  "{s}SDM630 " D_POWERUSAGE_ACTIVE "{m}%s/%s/%s " D_UNIT_WATT "{e}"
@ -312,7 +312,7 @@ void SDM630Show(bool json)
      current_l1, current_l2, current_l3);
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SDM630_DATA, mqtt_data,
+    WSContentSend_PD(HTTP_SNS_SDM630_DATA,
    voltage_l1, voltage_l2, voltage_l3, current_l1, current_l2, current_l3,
    active_power_l1, active_power_l2, active_power_l3,
    reactive_power_l1, reactive_power_l2, reactive_power_l3,
@ -341,7 +341,7 @@ bool Xsns25(uint8_t function)
        SDM630Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        SDM630Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_26_lm75ad.ino
+++ b/sonoff/xsns_26_lm75ad.ino
@ -91,7 +91,7 @@ void LM75ADShow(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "LM75AD", temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_TEMP, "LM75AD", temperature, TempUnit());
 #endif  // USE_WEBSERVER
    }
  }
@ -114,7 +114,7 @@ bool Xsns26(uint8_t function)
        LM75ADShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        LM75ADShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_27_apds9960.ino
+++ b/sonoff/xsns_27_apds9960.ino
@ -77,7 +77,7 @@ volatile uint8_t recovery_loop_counter = 0;  //count number of stateloops to swi
 bool APDS9960_overload = false;

 #ifdef USE_WEBSERVER
-const char HTTP_APDS_9960_SNS[] PROGMEM = "%s"
+const char HTTP_APDS_9960_SNS[] PROGMEM =
  "{s}" "Red" "{m}%s{e}"
  "{s}" "Green" "{m}%s{e}"
  "{s}" "Blue" "{m}%s{e}"
@ -1963,7 +1963,7 @@ void APDS9960_show(bool json)
        mqtt_data, APDS9960stype, red_chr, green_chr, blue_chr, ambient_chr, cct_chr, prox_chr);
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_APDS_9960_SNS, mqtt_data, red_chr, green_chr, blue_chr, ambient_chr, cct_chr, prox_chr );
+      WSContentSend_PD(HTTP_APDS_9960_SNS, red_chr, green_chr, blue_chr, ambient_chr, cct_chr, prox_chr );
 #endif  // USE_WEBSERVER
    }
  }
@ -2055,7 +2055,7 @@ bool Xsns27(uint8_t function)
            APDS9960_show(1);
            break;
 #ifdef USE_WEBSERVER
-        case FUNC_WEB_APPEND:
+        case FUNC_WEB_SENSOR:
          APDS9960_show(0);
          break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_28_tm1638.ino
+++ b/sonoff/xsns_28_tm1638.ino
@ -215,7 +215,7 @@ bool Xsns28(uint8_t function)
        TmShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        TmShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_29_mcp230xx.ino
+++ b/sonoff/xsns_29_mcp230xx.ino
@ -694,7 +694,7 @@ bool MCP230xx_Command(void) {

 #ifdef USE_MCP230xx_DISPLAYOUTPUT

-const char HTTP_SNS_MCP230xx_OUTPUT[] PROGMEM = "%s{s}MCP230XX D%d{m}%s{e}"; // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_MCP230xx_OUTPUT[] PROGMEM = "{s}MCP230XX D%d{m}%s{e}"; // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>

 void MCP230xx_UpdateWebData(void) {
  uint8_t gpio1 = MCP230xx_readGPIO(0);
@ -707,7 +707,7 @@ void MCP230xx_UpdateWebData(void) {
    if (Settings.mcp230xx_config[pin].pinmode >= 5) {
      char stt[7];
      sprintf(stt,ConvertNumTxt((gpio>>pin)&1,Settings.mcp230xx_config[pin].pinmode));
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_MCP230xx_OUTPUT, mqtt_data, pin, stt);
+      WSContentSend_PD(HTTP_SNS_MCP230xx_OUTPUT, pin, stt);
    }
  }
 }
@ -822,7 +822,7 @@ bool Xsns29(uint8_t function)
 #ifdef USE_WEBSERVER
 #ifdef USE_MCP230xx_OUTPUT
 #ifdef USE_MCP230xx_DISPLAYOUTPUT
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        MCP230xx_UpdateWebData();
        break;
 #endif // USE_MCP230xx_DISPLAYOUTPUT
--- a/sonoff/xsns_30_mpr121.ino
+++ b/sonoff/xsns_30_mpr121.ino
@ -356,8 +356,8 @@ void Mpr121Show(struct mpr121 *pS, uint8_t function)
 				}
 				// Add buttons to web string
 #ifdef USE_WEBSERVER
-				if (FUNC_WEB_APPEND == function) {
-					snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s{s}MPR121%c Button%d{m}%d{e}"), mqtt_data, pS->id[i], j, BITC(i, j));
+				if (FUNC_WEB_SENSOR == function) {
+					WSContentSend_PD(PSTR("{s}MPR121%c Button%d{m}%d{e}"), pS->id[i], j, BITC(i, j));
 				}
 #endif				// USE_WEBSERVER

@ -389,7 +389,7 @@ void Mpr121Show(struct mpr121 *pS, uint8_t function)
 * FUNC_INIT to initialize a driver,
 * FUNC_EVERY_50_MSECOND for near real-time operation,
 * FUNC_JSON_APPEND for telemetry data and
- * FUNC_WEB_APPEND for displaying data in the Tasmota web-interface
+ * FUNC_WEB_SENSOR for displaying data in the Tasmota web-interface
 *
 * @param   byte    function  Tasmota function ID.
 * @return  bool           ???
@ -426,8 +426,8 @@ bool Xsns30(uint8_t function)

 #ifdef USE_WEBSERVER
 			// Show sensor data on main web page
-		case FUNC_WEB_APPEND:
-			Mpr121Show(&mpr121, FUNC_WEB_APPEND);
+		case FUNC_WEB_SENSOR:
+			Mpr121Show(&mpr121, FUNC_WEB_SENSOR);
 			break;
 #endif				// USE_WEBSERVER
 		}
--- a/sonoff/xsns_31_ccs811.ino
+++ b/sonoff/xsns_31_ccs811.ino
@ -77,7 +77,7 @@ void CCS811Update(void)  // Perform every n second
  }
 }

-const char HTTP_SNS_CCS811[] PROGMEM = "%s"
+const char HTTP_SNS_CCS811[] PROGMEM =
  "{s}CCS811 " D_ECO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}"                // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
  "{s}CCS811 " D_TVOC "{m}%d " D_UNIT_PARTS_PER_BILLION "{e}";

@ -91,7 +91,7 @@ void CCS811Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_CCS811, mqtt_data, eCO2, TVOC);
+      WSContentSend_PD(HTTP_SNS_CCS811, eCO2, TVOC);
 #endif
    }
  }
@ -114,7 +114,7 @@ bool Xsns31(uint8_t function)
        CCS811Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        CCS811Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_32_mpu6050.ino
+++ b/sonoff/xsns_32_mpu6050.ino
@ -155,12 +155,13 @@ void MPU_6050Detect(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_SNS_AX_AXIS[] PROGMEM = "%s{s}%s " D_AX_AXIS "{m}%s{e}";                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_AY_AXIS[] PROGMEM = "%s{s}%s " D_AY_AXIS "{m}%s{e}";                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_AZ_AXIS[] PROGMEM = "%s{s}%s " D_AZ_AXIS "{m}%s{e}";                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_GX_AXIS[] PROGMEM = "%s{s}%s " D_GX_AXIS "{m}%s{e}";                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_GY_AXIS[] PROGMEM = "%s{s}%s " D_GY_AXIS "{m}%s{e}";                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_SNS_GZ_AXIS[] PROGMEM = "%s{s}%s " D_GZ_AXIS "{m}%s{e}";                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+const char HTTP_SNS_AXIS[] PROGMEM =
+  "{s}" D_SENSOR_MPU6050 " " D_AX_AXIS "{m}%s{e}"                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}" D_SENSOR_MPU6050 " " D_AY_AXIS "{m}%s{e}"                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}" D_SENSOR_MPU6050 " " D_AZ_AXIS "{m}%s{e}"                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}" D_SENSOR_MPU6050 " " D_GX_AXIS "{m}%s{e}"                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}" D_SENSOR_MPU6050 " " D_GY_AXIS "{m}%s{e}"                              // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "{s}" D_SENSOR_MPU6050 " " D_GZ_AXIS "{m}%s{e}";                             // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif // USE_WEBSERVER

 #define D_JSON_AXIS_AX "AccelXAxis"
@ -211,13 +212,8 @@ void MPU_6050Show(bool json)
 #endif // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, D_SENSOR_MPU6050, temperature, TempUnit());
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_AX_AXIS, mqtt_data, D_SENSOR_MPU6050, axis_ax);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_AY_AXIS, mqtt_data, D_SENSOR_MPU6050, axis_ay);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_AZ_AXIS, mqtt_data, D_SENSOR_MPU6050, axis_az);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_GX_AXIS, mqtt_data, D_SENSOR_MPU6050, axis_gx);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_GY_AXIS, mqtt_data, D_SENSOR_MPU6050, axis_gy);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_GZ_AXIS, mqtt_data, D_SENSOR_MPU6050, axis_gz);
+      WSContentSend_PD(HTTP_SNS_TEMP, D_SENSOR_MPU6050, temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_AXIS, axis_ax, axis_ay, axis_az, axis_gx, axis_gy, axis_gz);
 #endif // USE_WEBSERVER
    }
  }
@ -245,7 +241,7 @@ bool Xsns32(uint8_t function)
        MPU_6050Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        MPU_6050Show(0);
        MPU_6050PerformReading();
        break;
--- a/sonoff/xsns_34_hx711.ino
+++ b/sonoff/xsns_34_hx711.ino
@ -321,11 +321,11 @@ void HxEvery100mSecond(void)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_HX711_WEIGHT[] PROGMEM = "%s"
+const char HTTP_HX711_WEIGHT[] PROGMEM =
  "{s}HX711 " D_WEIGHT "{m}%s " D_UNIT_KILOGRAM "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
-const char HTTP_HX711_COUNT[] PROGMEM = "%s"
+const char HTTP_HX711_COUNT[] PROGMEM =
  "{s}HX711 " D_COUNT "{m}%d{e}";
-const char HTTP_HX711_CAL[] PROGMEM = "%s"
+const char HTTP_HX711_CAL[] PROGMEM =
  "{s}HX711 %s{m}{e}";
 #endif  // USE_WEBSERVER

@ -351,13 +351,13 @@ void HxShow(bool json)
    snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"HX711\":{\"" D_JSON_WEIGHT "\":%s%s}"), mqtt_data, weight_chr, scount);
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_HX711_WEIGHT, mqtt_data, weight_chr);
+    WSContentSend_PD(HTTP_HX711_WEIGHT, weight_chr);
    if (count > 1) {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_HX711_COUNT, mqtt_data, count);
+      WSContentSend_PD(HTTP_HX711_COUNT, count);
    }
    if (hx_calibrate_step) {
      char cal_text[30];
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_HX711_CAL, mqtt_data, GetTextIndexed(cal_text, sizeof(cal_text), hx_calibrate_msg, kHxCalibrationStates));
+      WSContentSend_PD(HTTP_HX711_CAL, GetTextIndexed(cal_text, sizeof(cal_text), hx_calibrate_msg, kHxCalibrationStates));
    }
 #endif  // USE_WEBSERVER
  }
@ -374,7 +374,7 @@ void HxShow(bool json)
 const char S_CONFIGURE_HX711[] PROGMEM = D_CONFIGURE_HX711;

 const char HTTP_BTN_MENU_MAIN_HX711[] PROGMEM =
-  "<br/><form action='" WEB_HANDLE_HX711 "' method='get'><button name='reset'>" D_RESET_HX711 "</button></form>";
+  "<p><form action='" WEB_HANDLE_HX711 "' method='get'><button name='reset'>" D_RESET_HX711 "</button></form></p>";

 const char HTTP_BTN_MENU_HX711[] PROGMEM =
  "<p><form action='" WEB_HANDLE_HX711 "' method='get'><button>" D_CONFIGURE_HX711 "</button></form></p>";
@ -485,7 +485,7 @@ bool Xsns34(uint8_t function)
        HxShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        HxShow(0);
        break;
 #ifdef USE_HX711_GUI
--- a/sonoff/xsns_35_tx20.ino
+++ b/sonoff/xsns_35_tx20.ino
@ -39,7 +39,7 @@ extern "C" {

 #ifdef USE_WEBSERVER

-const char HTTP_SNS_TX20[] PROGMEM = "%s"
+const char HTTP_SNS_TX20[] PROGMEM =
   "{s}TX20 " D_TX20_WIND_SPEED "{m}%s " D_UNIT_KILOMETER_PER_HOUR "{e}"
   "{s}TX20 " D_TX20_WIND_SPEED_AVG "{m}%s " D_UNIT_KILOMETER_PER_HOUR "{e}"
   "{s}TX20 " D_TX20_WIND_SPEED_MAX "{m}%s " D_UNIT_KILOMETER_PER_HOUR "{e}"
@ -186,7 +186,7 @@ void Tx20Show(bool json)
      mqtt_data, wind_speed_string, wind_speed_avg_string, wind_speed_max_string, wind_direction_string);
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TX20, mqtt_data, wind_speed_string, wind_speed_avg_string, wind_speed_max_string, wind_direction_string);
+    WSContentSend_PD(HTTP_SNS_TX20, wind_speed_string, wind_speed_avg_string, wind_speed_max_string, wind_direction_string);
 #endif  // USE_WEBSERVER
  }
 }
@ -211,7 +211,7 @@ bool Xsns35(uint8_t function)
        Tx20Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Tx20Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_36_mgc3130.ino
+++ b/sonoff/xsns_36_mgc3130.ino
@ -67,7 +67,7 @@ char MGC3130stype[8];


 #ifdef USE_WEBSERVER
-const char HTTP_MGC_3130_SNS[] PROGMEM = "%s"
+const char HTTP_MGC_3130_SNS[] PROGMEM =
  "{s}" "%s" "{m}%s{e}"
  "{s}" "HwRev" "{m}%u.%u{e}"
  "{s}" "loaderVer" "{m}%u.%u{e}"
@ -555,7 +555,7 @@ void MGC3130_show(bool json)
    }
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_MGC_3130_SNS, mqtt_data, MGC3130stype, status_chr, hwRev[0], hwRev[1], loaderVersion[0], loaderVersion[1], loaderPlatform );
+    WSContentSend_PD(HTTP_MGC_3130_SNS, MGC3130stype, status_chr, hwRev[0], hwRev[1], loaderVersion[0], loaderVersion[1], loaderPlatform );
 #endif  // USE_WEBSERVER
  }
 }
@ -622,7 +622,7 @@ bool Xsns36(uint8_t function)
          MGC3130_show(1);
          break;
 #ifdef USE_WEBSERVER
-        case FUNC_WEB_APPEND:
+        case FUNC_WEB_SENSOR:
          MGC3130_show(0);
          break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_37_rfsensor.ino
+++ b/sonoff/xsns_37_rfsensor.ino
@ -287,8 +287,8 @@ void RfSnsTheoV2Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
        } else {
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, sensor, temperature, TempUnit());
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ILLUMINANCE, mqtt_data, sensor, rfsns_theo_v2_t1[i].lux);
+          WSContentSend_PD(HTTP_SNS_TEMP, sensor, temperature, TempUnit());
+          WSContentSend_PD(HTTP_SNS_ILLUMINANCE, sensor, rfsns_theo_v2_t1[i].lux);
 #endif  // USE_WEBSERVER
        }
      }
@ -331,8 +331,8 @@ void RfSnsTheoV2Show(bool json)
          }
 #ifdef USE_WEBSERVER
        } else {
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, sensor, temperature, TempUnit());
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, sensor, humidity);
+          WSContentSend_PD(HTTP_SNS_TEMP, sensor, temperature, TempUnit());
+          WSContentSend_PD(HTTP_SNS_HUM, sensor, humidity);
 #endif  // USE_WEBSERVER
        }
      }
@ -539,11 +539,11 @@ uint8_t RfSnsAlectoCRC8(uint8_t *addr, uint8_t len)
 }

 #ifdef USE_WEBSERVER
-const char HTTP_SNS_ALECTOV2[] PROGMEM = "%s"
+const char HTTP_SNS_ALECTOV2[] PROGMEM =
  "{s}" D_ALECTOV2 " " D_RAIN "{m}%s " D_UNIT_MILLIMETER "{e}"
  "{s}" D_ALECTOV2 " " D_TX20_WIND_SPEED "{m}%s " D_UNIT_KILOMETER_PER_HOUR "{e}"
  "{s}" D_ALECTOV2 " " D_TX20_WIND_SPEED_MAX "{m}%s " D_UNIT_KILOMETER_PER_HOUR "{e}";
-const char HTTP_SNS_ALECTOV2_WDIR[] PROGMEM = "%s"
+const char HTTP_SNS_ALECTOV2_WDIR[] PROGMEM =
  "{s}" D_ALECTOV2 " " D_TX20_WIND_DIRECTION "{m}%s{e}";
 #endif

@ -588,11 +588,11 @@ void RfSnsAlectoV2Show(bool json)
        }
 #ifdef USE_WEBSERVER
      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, D_ALECTOV2, temperature, TempUnit());
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, D_ALECTOV2, humidity);
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ALECTOV2, mqtt_data, rain, wind, gust);
+        WSContentSend_PD(HTTP_SNS_TEMP, D_ALECTOV2, temperature, TempUnit());
+        WSContentSend_PD(HTTP_SNS_HUM, D_ALECTOV2, humidity);
+        WSContentSend_PD(HTTP_SNS_ALECTOV2, rain, wind, gust);
        if (rfsns_alecto_v2->type) {
-          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ALECTOV2_WDIR, mqtt_data, wdir);
+          WSContentSend_PD(HTTP_SNS_ALECTOV2_WDIR, wdir);
        }
 #endif  // USE_WEBSERVER
      }
@ -680,7 +680,7 @@ bool Xsns37(uint8_t function)
        RfSnsShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        RfSnsShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_38_az7798.ino
+++ b/sonoff/xsns_38_az7798.ino
@ -264,9 +264,9 @@ void AzShow(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
  } else {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_CO2, mqtt_data, ktype, az_co2);
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, ktype, temperature, TempUnit());
-    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, ktype, humidity);
+    WSContentSend_PD(HTTP_SNS_CO2, ktype, az_co2);
+    WSContentSend_PD(HTTP_SNS_TEMP, ktype, temperature, TempUnit());
+    WSContentSend_PD(HTTP_SNS_HUM, ktype, humidity);
 #endif  // USE_WEBSERVER
  }
 }
@ -291,7 +291,7 @@ bool Xsns38(uint8_t function)
        AzShow(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        AzShow(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_39_max31855.ino
+++ b/sonoff/xsns_39_max31855.ino
@ -139,7 +139,7 @@ void MAX31855_Show(bool Json){
 #endif  // USE_KNX
    } else {
 #ifdef USE_WEBSERVER
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "MAX31855", probetemp, TempUnit());
+        WSContentSend_PD(HTTP_SNS_TEMP, "MAX31855", probetemp, TempUnit());
 #endif  // USE_WEBSERVER
    }
 }
@ -164,7 +164,7 @@ bool Xsns39(uint8_t function)
        MAX31855_Show(true);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        MAX31855_Show(false);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_41_max44009.ino
+++ b/sonoff/xsns_41_max44009.ino
@ -139,8 +139,7 @@ void Max4409Show(bool json)
 #ifdef USE_WEBSERVER
    } else {
      // show integer value for lx on web-server
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ILLUMINANCE,
-                 mqtt_data, max44009_types, (int)max44009_illuminance);
+      WSContentSend_PD(HTTP_SNS_ILLUMINANCE, max44009_types, (int)max44009_illuminance);
 #endif  // USE_WEBSERVER
    }
  }
@ -166,7 +165,7 @@ bool Xsns41(uint8_t function)
        Max4409Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Max4409Show(0);
        break;
 #endif  // USE_WEBSERVER
--- a/sonoff/xsns_42_scd30.ino
+++ b/sonoff/xsns_42_scd30.ino
@ -452,10 +452,10 @@ void Scd30Show(bool json)
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
    } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_CO2EAVG, mqtt_data, "SCD30", scd30_CO2EAvg);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_CO2, mqtt_data, "SCD30", scd30_CO2);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "SCD30", temperature, TempUnit());
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, "SCD30", humidity);
+      WSContentSend_PD(HTTP_SNS_CO2EAVG, "SCD30", scd30_CO2EAvg);
+      WSContentSend_PD(HTTP_SNS_CO2, "SCD30", scd30_CO2);
+      WSContentSend_PD(HTTP_SNS_TEMP, "SCD30", temperature, TempUnit());
+      WSContentSend_PD(HTTP_SNS_HUM, "SCD30", humidity);
 #endif  // USE_WEBSERVER
    }
  }
@ -481,7 +481,7 @@ bool Xsns42(byte function)
        Scd30Show(1);
        break;
 #ifdef USE_WEBSERVER
-      case FUNC_WEB_APPEND:
+      case FUNC_WEB_SENSOR:
        Scd30Show(0);
        break;
 #endif  // USE_WEBSERVER