Update pl_PL.h (#22483)

This commit is contained in:
Grzegorz 2024-11-14 09:51:30 +01:00 committed by GitHub
parent dd99642cf7
commit 0dcfa74ef3
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 64 additions and 64 deletions

View File

@ -51,15 +51,15 @@
#define D_DECIMAL_SEPARATOR ","
// Common
#define D_ABSOLUTE_HUMIDITY "Abs Humidity"
#define D_ABSOLUTE_HUMIDITY "Wilgotność"
#define D_ADMIN "Admin"
#define D_AIR_QUALITY "Jakość powietrza"
#define D_AP "AP" // Access Point
#define D_AS "jak"
#define D_AUTO "AUTO"
#define D_BATTERY "Battery"
#define D_BATT "Batt" // Short for Battery
#define D_BATTERY_CHARGE "Charge" // Battery charge in %
#define D_BATTERY "Bateria"
#define D_BATT "Bat" // Short for Battery
#define D_BATTERY_CHARGE "Ładowanie" // Battery charge in %
#define D_BLINK "Miganie"
#define D_BLINKOFF "Miganie - Wył."
#define D_BOOT_COUNT "Licznik restartów"
@ -76,13 +76,13 @@
#define D_COMMAND "Komenda"
#define D_CONNECTED "Połączony"
#define D_CORS_DOMAIN "Domena CORS"
#define D_COLOR "Color"
#define D_COLOR "Kolor"
#define D_COUNT "Licz"
#define D_COUNTER "Licznik"
#define D_CT_POWER "Moc CT"
#define D_CURRENT "Prąd" // As in Voltage and Current
#define D_CURRENT_NEUTRAL "Current Neutral"
#define D_DATA "Data"
#define D_CURRENT_NEUTRAL "Prąd N"
#define D_DATA "Dane"
#define D_DARKLIGHT "Ciemny"
#define D_DEBUG "Debug"
#define D_DEWPOINT "Punkt rosy"
@ -107,7 +107,7 @@
#define D_FILE_SYSTEM_SIZE "Rozmiar systemu plików"
#define D_FLOW_RATE "Przepływ"
#define D_FRAGMENTATION "frag." // Lower case abbreviated version of fragmentation used in "memory fragmentation"
#define D_FRAME_RATE "Frame rate"
#define D_FRAME_RATE "Liczba klatek"
#define D_FREE_MEMORY "Wolna pamięć"
#define D_PSR_MAX_MEMORY "Pamięć PS-RAM"
#define D_PSR_FREE_MEMORY "Wolna pamięć PS-RAM"
@ -116,8 +116,8 @@
#define D_GATEWAY "Brama"
#define D_GROUP "Grupa"
#define D_HOST "Serwer"
#define D_HALL_EFFECT "Hall Effect"
#define D_HEATINDEX "Heat index"
#define D_HALL_EFFECT "Efekt Hall"
#define D_HEATINDEX "Indeks ciepła"
#define D_HOSTNAME "Nazwa serwera"
#define D_HUMIDITY "Wilgotność"
#define D_ILLUMINANCE "Podświetlanie"
@ -152,7 +152,7 @@
#define D_POWER_FACTOR "Cosinus fi"
#define D_POWERUSAGE "Moc"
#define D_POWERUSAGE_ACTIVE "Moc czynna"
#define D_POWERUSAGE_ACTIVE_TOTAL "Active Power Total"
#define D_POWERUSAGE_ACTIVE_TOTAL "Moc czynna całkowita"
#define D_POWERUSAGE_APPARENT "Moc pozorna"
#define D_POWERUSAGE_REACTIVE "Moc bierna"
#define D_PRESSURE "Ciśnienie"
@ -188,9 +188,9 @@
#define D_TRANSMIT "Wyślij"
#define D_TRUE "Prawda"
#define D_TVOC "TVOC"
#define D_TWILIGHT_ASTRONOMICAL "Astronomical"
#define D_TWILIGHT_CIVIL "Civil"
#define D_TWILIGHT_NAUTICAL "Nautical"
#define D_TWILIGHT_ASTRONOMICAL "Astronomiczny"
#define D_TWILIGHT_CIVIL "Cywilny"
#define D_TWILIGHT_NAUTICAL "Morski"
#define D_UPLOAD "Wgraj"
#define D_UPTIME "Czas pracy"
#define D_USED "użyte"
@ -201,8 +201,8 @@
#define D_UV_INDEX_2 "Średni"
#define D_UV_INDEX_3 "Wysoki"
#define D_UV_INDEX_4 "Niebezpieczny"
#define D_UV_INDEX_5 "Burn L1/2"
#define D_UV_INDEX_6 "Burn L3"
#define D_UV_INDEX_5 "Krytyczny L1/2"
#define D_UV_INDEX_6 "Krytyczny L3"
#define D_UV_INDEX_7 "OoR"
#define D_UV_LEVEL "Poziom UV"
#define D_UV_POWER "Moc UV"
@ -275,8 +275,8 @@
#define D_CONFIGURATION "Konfiguracja"
#define D_INFORMATION "Informacje"
#define D_FIRMWARE_UPGRADE "Aktualizacja oprogramowania"
#define D_MANAGEMENT "Konsole"
#define D_GPIO_VIEWER "GPIO Viewer"
#define D_MANAGEMENT "Narzędzia"
#define D_GPIO_VIEWER "Wizualizacja GPIO"
#define D_CONSOLE "Konsola"
#define D_CONFIRM_RESTART "Potwierdź restart"
@ -528,7 +528,7 @@
// xdrv_89_dali.ino
#define D_SENSOR_DALI_RX "Dali RX"
#define D_SENSOR_DALI_TX "Dali TX"
#define D_CONFIGURE_DALI "Config DALI"
#define D_CONFIGURE_DALI "Konfiguracja DALI"
// xdrv_03_energy.ino
#define D_ENERGY_TODAY "Energia dzisiaj"
@ -537,8 +537,8 @@
// xsns_100_ina3221.ino
#define D_UNIT_CHARGE "Ah"
#define D_CHARGE "Charge"
#define D_ENERGY "Energy"
#define D_CHARGE "Ładowanie"
#define D_ENERGY "Energia"
// xdrv_27_shutter.ino
#define D_OPEN "Otwórz"
@ -571,12 +571,12 @@
#define D_THERMOSTAT_AUTOTUNE_HYBRID "Autotune (Hybrid)"
// xdrv_79_esp32_ble.ino
#define D_CONFIGURE_BLE "Configure BLE"
#define D_BLE_PARAMETERS "Bluetooth Settings"
#define D_MQTT_BLE_ENABLE "Enable Bluetooth"
#define D_MQTT_BLE_ACTIVESCAN "Enable Active Scan(*)"
#define D_BLE_DEVICES "Devices Seen"
#define D_BLE_REMARK "items marked (*) are not stored in config"
#define D_CONFIGURE_BLE "Konfiguracja BLE"
#define D_BLE_PARAMETERS "Ustawienia Bluetooth"
#define D_MQTT_BLE_ENABLE "Załącz Bluetooth"
#define D_MQTT_BLE_ACTIVESCAN "Załącz Aktywne Skanowanie(*)"
#define D_BLE_DEVICES "Znalezione Urządzenia"
#define D_BLE_REMARK "rzeczy oznaczone (*) nie są zapisywane w konfiguracji"
// xsns_05_ds18b20.ino
#define D_SENSOR_BUSY "Czujnik zajęty"
@ -1227,52 +1227,52 @@
#define D_NEOPOOL_MACH_GENERIC "Generic"
#define D_NEOPOOL_MACH_BAYROL "Bayrol"
#define D_NEOPOOL_MACH_HAY "Hay"
#define D_NEOPOOL_FILTRATION_MANUAL "Manual" // Filtration modes
#define D_NEOPOOL_FILTRATION_MANUAL "Ręczny" // Filtration modes
#define D_NEOPOOL_FILTRATION_AUTO "Auto"
#define D_NEOPOOL_FILTRATION_HEATING "Heating"
#define D_NEOPOOL_FILTRATION_HEATING "Ogrzewanie"
#define D_NEOPOOL_FILTRATION_SMART "Smart"
#define D_NEOPOOL_FILTRATION_INTELLIGENT "Intelligent"
#define D_NEOPOOL_FILTRATION_BACKWASH "Backwash"
#define D_NEOPOOL_FILTRATION_NONE "" // Filtration speed level
#define D_NEOPOOL_FILTRATION_SLOW "slow"
#define D_NEOPOOL_FILTRATION_MEDIUM "medium"
#define D_NEOPOOL_FILTRATION_FAST "fast"
#define D_NEOPOOL_TYPE "Type" // Sensor & relais names
#define D_NEOPOOL_FILTRATION_SLOW "wolny"
#define D_NEOPOOL_FILTRATION_MEDIUM "średni"
#define D_NEOPOOL_FILTRATION_FAST "szybki"
#define D_NEOPOOL_TYPE "Typ" // Sensor & relais names
#define D_NEOPOOL_REDOX "Redox"
#define D_NEOPOOL_CHLORINE "Chlorine"
#define D_NEOPOOL_CONDUCTIVITY "Conductivity"
#define D_NEOPOOL_IONIZATION "Ionization"
#define D_NEOPOOL_HYDROLYSIS "Hydrolysis"
#define D_NEOPOOL_RELAY "Relay"
#define D_NEOPOOL_RELAY_FILTRATION "Filtration" // Relay assignment
#define D_NEOPOOL_RELAY_LIGHT "Light"
#define D_NEOPOOL_RELAY_PH_ACID "Acid pump"
#define D_NEOPOOL_RELAY_PH_BASE "Base pump"
#define D_NEOPOOL_RELAY_RX "Redox level"
#define D_NEOPOOL_RELAY_CL "Chlorine pump"
#define D_NEOPOOL_RELAY "Przekaźnik"
#define D_NEOPOOL_RELAY_FILTRATION "Filtrowanie" // Relay assignment
#define D_NEOPOOL_RELAY_LIGHT "Światło"
#define D_NEOPOOL_RELAY_PH_ACID "Pompa Acid"
#define D_NEOPOOL_RELAY_PH_BASE "Pompa Base"
#define D_NEOPOOL_RELAY_RX "Poziom Redox"
#define D_NEOPOOL_RELAY_CL "Pompa Chlorine"
#define D_NEOPOOL_RELAY_CD "Conductivity"
#define D_NEOPOOL_RELAY_HEATING "Heating"
#define D_NEOPOOL_RELAY_HEATING "Ogrzewanie"
#define D_NEOPOOL_RELAY_UV "UV"
#define D_NEOPOOL_RELAY_VALVE "Valve"
#define D_NEOPOOL_RELAY_AUX "Aux"
#define D_NEOPOOL_TIME "Time"
#define D_NEOPOOL_FILT_MODE "Filtration mode"
#define D_NEOPOOL_RELAY_VALVE "Zawór"
#define D_NEOPOOL_RELAY_AUX "Uniwersalny"
#define D_NEOPOOL_TIME "Czas"
#define D_NEOPOOL_FILT_MODE "Tryb filtracji"
#define D_NEOPOOL_CELL_RUNTIME "Cell runtime"
#define D_NEOPOOL_POLARIZATION "Pol" // Sensor status
#define D_NEOPOOL_PR_OFF "PrOff"
#define D_NEOPOOL_SETPOINT_OK "Ok"
#define D_NEOPOOL_COVER "Cover"
#define D_NEOPOOL_SHOCK "Boost"
#define D_NEOPOOL_STATUS_ON "ON"
#define D_NEOPOOL_STATUS_OFF "OFF"
#define D_NEOPOOL_STATUS_WAIT "WAIT"
#define D_NEOPOOL_STATUS_TANK "TANK"
#define D_NEOPOOL_STATUS_FLOW "Flow"
#define D_NEOPOOL_LOW "Low"
#define D_NEOPOOL_COVER "Okładka"
#define D_NEOPOOL_SHOCK "Wzmocnienie"
#define D_NEOPOOL_STATUS_ON "ZAŁĄCZONY"
#define D_NEOPOOL_STATUS_OFF "WYŁĄCZONY"
#define D_NEOPOOL_STATUS_WAIT "CZEKAI"
#define D_NEOPOOL_STATUS_TANK "ZBIORNIK"
#define D_NEOPOOL_STATUS_FLOW "Przepływ"
#define D_NEOPOOL_LOW "Niski"
#define D_NEOPOOL_FLOW1 "FL1"
#define D_NEOPOOL_FLOW2 "FL2"
#define D_NEOPOOL_PH_HIGH "too high" // ph Alarms
#define D_NEOPOOL_PH_LOW "too low"
#define D_NEOPOOL_PH_HIGH "za wysoki" // ph Alarms
#define D_NEOPOOL_PH_LOW "za niski"
#define D_NEOPOOL_PUMP_TIME_EXCEEDED "czas pompowania przekroczony"
// xsns_106_gdk101.ino
@ -1284,18 +1284,18 @@
#define D_SENSOR_PIPSOLAR_RX "Pipsolar RX"
// xsns_102_ld2410.ino
#define D_MOVING_DISTANCE "Moving Distance"
#define D_STATIC_DISTANCE "Static Distance"
#define D_DETECT_DISTANCE "Detect Distance"
#define D_MOVING_ENERGY_T "Moving target"
#define D_STATIC_ENERGY_T "Static target"
#define D_LD2410_PIN_STATE "Output pin state"
#define D_LD2410_LIGHT "Light sensor"
#define D_MOVING_DISTANCE "Dystans Przesówu"
#define D_STATIC_DISTANCE "Dystans Statyczny"
#define D_DETECT_DISTANCE "Wykryj Dystans"
#define D_MOVING_ENERGY_T "Cel przesówu"
#define D_STATIC_ENERGY_T "Cel statyczny"
#define D_LD2410_PIN_STATE "Stan wyjść pin"
#define D_LD2410_LIGHT "Czujnik światła"
// xsns_115_wooliis.ino
#define D_IMPORT "Import"
#define D_EXPORT "Export"
#define D_CHARGING "Charging"
#define D_CAPACITY "Capacity"
#define D_CHARGING "Ładowanie"
#define D_CAPACITY "Pojemność"
#endif // _LANGUAGE_PL_PL_D_H_