mirror of https://github.com/arendst/Tasmota.git
Change Sonoff-Tasmota to Tasmota
This commit is contained in:
Theo Arends
parent
ffb8496c3a
commit
0e07397ff7
|
|
@ -13,7 +13,7 @@ about: Create a report to help us improve
|
|||
> - If your issue is a flashing issue, please address it to the [Tasmota Support Chat](https://discord.gg/Ks2Kzd4)
|
||||
> - If your issue is compilation problem, please address it to the [Tasmota Support Chat](https://discord.gg/Ks2Kzd4)
|
||||
> - If your issue has been addressed before (i.e., duplicated issue), please ask in the original issue
|
||||
> - If your issue is a Wi-Fi problem or MQTT problem, please try the steps provided in the [FAQ](https://github.com/arendst/Sonoff-Tasmota/wiki/FAQ) and troubleshooting wiki articles
|
||||
> - If your issue is a Wi-Fi problem or MQTT problem, please try the steps provided in the [FAQ](https://github.com/arendst/Tasmota/wiki/FAQ) and troubleshooting wiki articles
|
||||
>
|
||||
> Please take a few minutes to complete the requested information below. Our ability to provide assistance is greatly hampered without it. The details requested potentially affect which options to pursue. The small amount of time you spend completing the template will also help the volunteers providing the assistance to you to reduce the time required to help you.
|
||||
|
||||
|
|
@ -26,9 +26,9 @@ _Make sure your have performed every step and checked the applicable boxes befor
|
|||
|
||||
**FAILURE TO COMPLETE THE REQUESTED INFORMATION WILL RESULT IN YOUR ISSUE BEING CLOSED**
|
||||
|
||||
- [ ] Read the [Contributing Guide and Policy](https://github.com/arendst/Sonoff-Tasmota/blob/development/CONTRIBUTING.md) and [the Code of Conduct](https://github.com/arendst/Sonoff-Tasmota/blob/development/CODE_OF_CONDUCT.md)
|
||||
- [ ] Searched the problem in [issues](https://github.com/arendst/Sonoff-Tasmota/issues)
|
||||
- [ ] Searched the problem in the [wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)
|
||||
- [ ] Read the [Contributing Guide and Policy](https://github.com/arendst/Tasmota/blob/development/CONTRIBUTING.md) and [the Code of Conduct](https://github.com/arendst/Tasmota/blob/development/CODE_OF_CONDUCT.md)
|
||||
- [ ] Searched the problem in [issues](https://github.com/arendst/Tasmota/issues)
|
||||
- [ ] Searched the problem in the [wiki](https://github.com/arendst/Tasmota/wiki/Troubleshooting)
|
||||
- [ ] Searched the problem in the [forum](https://groups.google.com/d/forum/sonoffusers)
|
||||
- [ ] Searched the problem in the [chat](https://discord.gg/Ks2Kzd4)
|
||||
- [ ] Device used (e.g., Sonoff Basic): _____
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ about: Users Troubleshooting Help
|
|||
> - If your issue is a flashing issue, please address it to the [Tasmota Support Chat](https://discord.gg/Ks2Kzd4)
|
||||
> - If your issue is compilation problem, please address it to the [Tasmota Support Chat](https://discord.gg/Ks2Kzd4)
|
||||
> - If your issue has been addressed before (i.e., duplicated issue), please ask in the original issue
|
||||
> - If your issue is a Wi-Fi problem or MQTT problem, please try the steps provided in the [FAQ](https://github.com/arendst/Sonoff-Tasmota/wiki/FAQ) and troubleshooting wiki articles
|
||||
> - If your issue is a Wi-Fi problem or MQTT problem, please try the steps provided in the [FAQ](https://github.com/arendst/Tasmota/wiki/FAQ) and troubleshooting wiki articles
|
||||
>
|
||||
> Please take a few minutes to complete the requested information below. Our ability to provide assistance is greatly hampered without it. The details requested potentially affect which options to pursue. The small amount of time you spend completing the template will also help the volunteers providing the assistance to you to reduce the time required to help you.
|
||||
|
||||
|
|
@ -27,9 +27,9 @@ _Make sure these boxes are checked before submitting your issue. Thank you_
|
|||
|
||||
**FAILURE TO COMPLETE THE REQUESTED INFORMATION WILL RESULT IN YOUR ISSUE BEING CLOSED**
|
||||
|
||||
- [ ] Read the [Contributing Guide and Policy](https://github.com/arendst/Sonoff-Tasmota/blob/development/CONTRIBUTING.md) and [the Code of Conduct](https://github.com/arendst/Sonoff-Tasmota/blob/development/CODE_OF_CONDUCT.md)
|
||||
- [ ] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
|
||||
- [ ] Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)
|
||||
- [ ] Read the [Contributing Guide and Policy](https://github.com/arendst/Tasmota/blob/development/CONTRIBUTING.md) and [the Code of Conduct](https://github.com/arendst/Tasmota/blob/development/CODE_OF_CONDUCT.md)
|
||||
- [ ] Searched the problem in issues (https://github.com/arendst/Tasmota/issues)
|
||||
- [ ] Searched the problem in the wiki (https://github.com/arendst/Tasmota/wiki/Troubleshooting)
|
||||
- [ ] Searched the problem in the forum (https://groups.google.com/d/forum/sonoffusers)
|
||||
- [ ] Searched the problem in the chat (https://discord.gg/Ks2Kzd4)
|
||||
- [ ] Device used (e.g., Sonoff Basic): _____
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
## Description:
|
||||
|
||||
**Related issue (if applicable):** fixes #<Sonoff-Tasmota issue number goes here>
|
||||
**Related issue (if applicable):** fixes #<Tasmota issue number goes here>
|
||||
|
||||
## Checklist:
|
||||
- [ ] The pull request is done against the latest dev branch
|
||||
|
|
@ -8,4 +8,4 @@
|
|||
- [ ] Only one feature/fix was added per PR.
|
||||
- [ ] The code change is tested and works on core pre-2.6
|
||||
- [ ] The code change pass travis tests. **Your PR cannot be merged unless tests pass**
|
||||
- [ ] I accept the [CLA](https://github.com/arendst/Sonoff-Tasmota/blob/development/CONTRIBUTING.md#contributor-license-agreement-cla).
|
||||
- [ ] I accept the [CLA](https://github.com/arendst/Tasmota/blob/development/CONTRIBUTING.md#contributor-license-agreement-cla).
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
.clang_complete
|
||||
.gcc-flags.json
|
||||
.cache
|
||||
sonoff/user_config_override.h
|
||||
tasmota/user_config_override.h
|
||||
build
|
||||
firmware.map
|
||||
firmware.asm
|
||||
|
|
|
|||
2
API.md
2
API.md
|
|
@ -2,7 +2,7 @@
|
|||
|
||||
# Basic API information
|
||||
|
||||
Sonoff-Tasmota can easily be extended by developers using provided function pointers as callback Ids. This document lists the available callback function Ids. See the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Sensor-API) for more information.
|
||||
Tasmota can easily be extended by developers using provided function pointers as callback Ids. This document lists the available callback function Ids. See the wiki (https://github.com/arendst/Tasmota/wiki/Sensor-API) for more information.
|
||||
|
||||
Callback availability can be checked by searching for either XdrvCall, XsnsCall, XdspCall and XnrgCall.
|
||||
|
||||
|
|
|
|||
|
|
@ -4,11 +4,11 @@
|
|||
|
||||
**Any contribution helps our team and makes Tasmota better for the entire community!**
|
||||
|
||||
Everybody is welcome and invited to contribute to Sonoff-Tasmota Project by:
|
||||
Everybody is welcome and invited to contribute to Tasmota Project by:
|
||||
|
||||
* Testing newly released features and reporting issues.
|
||||
* Providing Pull Requests (Features, Proof of Concepts, Language files or Fixes)
|
||||
* Contributing missing documentation for features and devices on our [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Contributing)
|
||||
* Contributing missing documentation for features and devices on our [Wiki](https://github.com/arendst/Tasmota/wiki/Contributing)
|
||||
|
||||
This document describes rules that are in effect for this repository, meant for handling issues by contributors in the issue tracker and PRs.
|
||||
|
||||
|
|
@ -44,10 +44,10 @@ A Pull Request (PR) is the process where code modifications are managed in GitHu
|
|||
The process is straight-forward.
|
||||
|
||||
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/guide/pull-requests.md#best-practices-for-faster-reviews) by Kubernetes (but skip step 0)
|
||||
- Fork the Sonoff-Tasmota Repository [git repository](https://github.com/arendst/Sonoff-Tasmota).
|
||||
- Fork the Tasmota Repository [git repository](https://github.com/arendst/Tasmota).
|
||||
- Write/Change the code in your Fork for a new feature, bug fix, new sensor, optimization, etc.
|
||||
- Ensure tests work.
|
||||
- Create a Pull Request against the [**dev**](https://github.com/arendst/Sonoff-Tasmota/tree/dev) branch of Sonoff-Tasmota.
|
||||
- Create a Pull Request against the [**dev**](https://github.com/arendst/Tasmota/tree/dev) branch of Tasmota.
|
||||
|
||||
1. All pull requests must be done against the dev branch.
|
||||
2. Only relevant files should be touched (Also beware if your editor has auto-formatting feature enabled).
|
||||
|
|
|
|||
2
Doxyfile
2
Doxyfile
|
|
@ -32,7 +32,7 @@ DOXYFILE_ENCODING = UTF-8
|
|||
# title of most generated pages and in a few other places.
|
||||
# The default value is: My Project.
|
||||
|
||||
PROJECT_NAME = Sonoff-Tasmota
|
||||
PROJECT_NAME = Tasmota
|
||||
|
||||
# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
|
||||
# could be handy for archiving the generated documentation or if some version
|
||||
|
|
|
|||
48
README.md
48
README.md
|
|
@ -1,29 +1,29 @@
|
|||
<img src="/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
|
||||
|
||||
# Sonoff-Tasmota
|
||||
# Tasmota
|
||||
Alternative firmware for _ESP8266 based devices_ like [iTead](https://www.itead.cc/) _**Sonoff**_ with **web UI, rules and timers, OTA updates, custom device templates and sensor support**. Allows control over **MQTT**, **HTTP**, **Serial** and **KNX** for integrations with smart home systems. Written for Arduino IDE and PlatformIO.
|
||||
|
||||
[](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
|
||||
[](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
|
||||
[](https://github.com/arendst/Sonoff-Tasmota/blob/development/LICENSE.txt)
|
||||
[](https://github.com/arendst/Tasmota/releases/latest)
|
||||
[](https://github.com/arendst/Tasmota/releases/latest)
|
||||
[](https://github.com/arendst/Tasmota/blob/development/LICENSE.txt)
|
||||
[](https://discord.gg/Ks2Kzd4)
|
||||
|
||||
If you like **Sonoff-Tasmota**, give it a star, or fork it, and contribute!
|
||||
If you like **Tasmota**, give it a star, or fork it, and contribute!
|
||||
|
||||
[](https://github.com/arendst/Sonoff-Tasmota/stargazers)
|
||||
[](https://github.com/arendst/Sonoff-Tasmota/network)
|
||||
[](https://github.com/arendst/Tasmota/stargazers)
|
||||
[](https://github.com/arendst/Tasmota/network)
|
||||
[](https://paypal.me/tasmota)
|
||||
|
||||
See [RELEASENOTES.md](https://github.com/arendst/Sonoff-Tasmota/blob/development/RELEASENOTES.md) for release information.
|
||||
See [RELEASENOTES.md](https://github.com/arendst/Tasmota/blob/development/RELEASENOTES.md) for release information.
|
||||
|
||||
In addition to the [release webpage](https://github.com/arendst/Sonoff-Tasmota/releases/latest) the binaries can also be downloaded from http://thehackbox.org/tasmota/release/
|
||||
In addition to the [release webpage](https://github.com/arendst/Tasmota/releases/latest) the binaries can also be downloaded from http://thehackbox.org/tasmota/release/
|
||||
|
||||
## Development
|
||||
[](https://github.com/arendst/Sonoff-Tasmota)
|
||||
[](https://github.com/arendst/Tasmota)
|
||||
[](http://thehackbox.org/tasmota/)
|
||||
[](https://travis-ci.org/arendst/Sonoff-Tasmota)
|
||||
[](https://travis-ci.org/arendst/Tasmota)
|
||||
|
||||
See [sonoff/_changelog.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_changelog.ino) for detailed change information.
|
||||
See [sonoff/_changelog.ino](https://github.com/arendst/Tasmota/blob/development/sonoff/_changelog.ino) for detailed change information.
|
||||
|
||||
Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits unexpected behaviour for your device and configuration, you should upgrade to the latest development version instead to see if your problem is resolved as some bugs in previous releases or development builds may already have been resolved.
|
||||
|
||||
|
|
@ -39,23 +39,23 @@ An ESP82xx Wi-Fi device is not a toy. It uses Mains AC so there is a danger of e
|
|||
We don't take any responsibility nor liability for using this software nor for the installation or any tips, advice, videos, etc. given by any member of this site or any related site.
|
||||
|
||||
## Note
|
||||
Please do not ask to add new devices unless it requires additional code for new features. If the device is not listed as a module, try using [Templates](https://github.com/arendst/Sonoff-Tasmota/wiki/Templates) first. If it is not listed in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates) create your own [Template](https://github.com/arendst/Sonoff-Tasmota/wiki/Templates#creating-your-template-).
|
||||
Please do not ask to add new devices unless it requires additional code for new features. If the device is not listed as a module, try using [Templates](https://github.com/arendst/Tasmota/wiki/Templates) first. If it is not listed in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates) create your own [Template](https://github.com/arendst/Tasmota/wiki/Templates#creating-your-template-).
|
||||
|
||||
## Quick Install
|
||||
Download one of the released binaries from https://github.com/arendst/Sonoff-Tasmota/releases and flash it to your hardware as [documented in the wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Flashing).
|
||||
Download one of the released binaries from https://github.com/arendst/Tasmota/releases and flash it to your hardware as [documented in the wiki](https://github.com/arendst/Tasmota/wiki/Flashing).
|
||||
|
||||
## Important User Compilation Information
|
||||
If you want to compile Sonoff-Tasmota yourself keep in mind the following:
|
||||
If you want to compile Tasmota yourself keep in mind the following:
|
||||
|
||||
- Only Flash Mode **DOUT** is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device. See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Flashing) for background information.
|
||||
- Sonoff-Tasmota uses a 1M linker script WITHOUT spiffs **1M (no SPIFFS)** for optimal code space.
|
||||
- To make compile time changes to Sonoff-Tasmota it can use the ``user_config_override.h`` file. It assures keeping your settings when you download and compile a new version. To use ``user_config.override.h`` you will have to make a copy of the provided ``user_config_override_sample.h`` file and add your setting overrides. To enable the override file you will need to use a compile define as documented in the ``user_config_override_sample.h`` file.
|
||||
- Only Flash Mode **DOUT** is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device. See [Wiki](https://github.com/arendst/Tasmota/wiki/Flashing) for background information.
|
||||
- Tasmota uses a 1M linker script WITHOUT spiffs **1M (no SPIFFS)** for optimal code space.
|
||||
- To make compile time changes to Tasmota it can use the ``user_config_override.h`` file. It assures keeping your settings when you download and compile a new version. To use ``user_config.override.h`` you will have to make a copy of the provided ``user_config_override_sample.h`` file and add your setting overrides. To enable the override file you will need to use a compile define as documented in the ``user_config_override_sample.h`` file.
|
||||
|
||||
## Configuration Information
|
||||
Please refer to the Installation and configuration articles in the [wiki](https://github.com/arendst/Sonoff-Tasmota/wiki).
|
||||
Please refer to the Installation and configuration articles in the [wiki](https://github.com/arendst/Tasmota/wiki).
|
||||
|
||||
## Migration Information
|
||||
See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
|
||||
See [wiki migration path](https://github.com/arendst/Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
|
||||
|
||||
1. Migrate to **Sonoff-Tasmota 3.9.x**
|
||||
2. Migrate to **Sonoff-Tasmota 4.x**
|
||||
|
|
@ -67,23 +67,23 @@ See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade
|
|||
|
||||
For a database of supported devices see [Tasmota Device Templates Repository](https://blakadder.github.io/templates)
|
||||
|
||||
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for use instructions and how-to's.<br />
|
||||
See [Wiki](https://github.com/arendst/Tasmota/wiki) for use instructions and how-to's.<br />
|
||||
See [Community](https://groups.google.com/d/forum/sonoffusers) for forum.<br />
|
||||
Visit [Discord Chat](https://discord.gg/Ks2Kzd4) for discussions and troubleshooting.
|
||||
|
||||
## Contribute
|
||||
You can contribute to Sonoff-Tasmota by
|
||||
You can contribute to Tasmota by
|
||||
- providing Pull Requests (Features, Proof of Concepts, Language files or Fixes)
|
||||
- testing new released features and report issues
|
||||
- donating to acquire hardware for testing and implementing or out of gratitude
|
||||
- contributing missing documentation for features and devices on our [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki)
|
||||
- contributing missing documentation for features and devices on our [Wiki](https://github.com/arendst/Tasmota/wiki)
|
||||
|
||||
[](https://paypal.me/tasmota)
|
||||
|
||||
## Credits
|
||||
|
||||
### Libraries Used
|
||||
Libraries used with Sonoff-Tasmota are:
|
||||
Libraries used with Tasmota are:
|
||||
- [ESP8266 core for Arduino](https://github.com/esp8266/Arduino)
|
||||
- [Adafruit CCS811](https://github.com/adafruit/Adafruit_CCS811)
|
||||
- [Adafruit ILI9341](https://github.com/adafruit/Adafruit_ILI9341)
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
<img src="https://github.com/arendst/Sonoff-Tasmota/blob/master/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
|
||||
<img src="https://github.com/arendst/Tasmota/blob/master/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
|
||||
|
||||
# RELEASE NOTES
|
||||
|
||||
## Migration Information
|
||||
See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
|
||||
See [wiki migration path](https://github.com/arendst/Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
|
||||
|
||||
1. Migrate to **Sonoff-Tasmota 3.9.x**
|
||||
2. Migrate to **Sonoff-Tasmota 4.x**
|
||||
|
|
@ -16,7 +16,7 @@ This release will be supported from ESP8266/Arduino library Core version **pre-2
|
|||
Although it might still compile on previous Core versions all support will be removed starting in the next Release.
|
||||
|
||||
## Support of TLS
|
||||
To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. See full documentation on https://github.com/arendst/Sonoff-Tasmota/wiki/AWS-IoT
|
||||
To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. See full documentation on https://github.com/arendst/Tasmota/wiki/AWS-IoT
|
||||
|
||||
## Initial configuration tools
|
||||
For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed.
|
||||
|
|
|
|||
20
SUPPORT.md
20
SUPPORT.md
|
|
@ -2,24 +2,24 @@
|
|||
|
||||
# Support
|
||||
|
||||
If you're looking for support on **Sonoff-Tasmota** there are some options available:
|
||||
If you're looking for support on **Tasmota** there are some options available:
|
||||
|
||||
## Documentation:
|
||||
|
||||
* [Wiki Pages](https://github.com/arendst/Sonoff-Tasmota/wiki): For information on how to Flash Tasmota, configure and use it.
|
||||
* [FAQ](https://github.com/arendst/Sonoff-Tasmota/wiki/FAQ): For information on common problems and solutions.
|
||||
* [Troubleshooting Information](https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting): For ways to debug and troubleshoot.
|
||||
* [Commands Information](https://github.com/arendst/Sonoff-Tasmota/wiki/Commands): For information on all the commands supported by Tasmota.
|
||||
* [Wiki Pages](https://github.com/arendst/Tasmota/wiki): For information on how to Flash Tasmota, configure and use it.
|
||||
* [FAQ](https://github.com/arendst/Tasmota/wiki/FAQ): For information on common problems and solutions.
|
||||
* [Troubleshooting Information](https://github.com/arendst/Tasmota/wiki/Troubleshooting): For ways to debug and troubleshoot.
|
||||
* [Commands Information](https://github.com/arendst/Tasmota/wiki/Commands): For information on all the commands supported by Tasmota.
|
||||
|
||||
## Support's Community:
|
||||
|
||||
* [Tasmota Forum](https://groups.google.com/d/forum/sonoffusers): For usage and discussions.
|
||||
* [Tasmota Support Chat](https://discord.gg/Ks2Kzd4): For support, troubleshooting and general questions. You have better chances to get fast answers from members of the Tasmota Community.
|
||||
* [Search in Issues](https://github.com/arendst/Sonoff-Tasmota/issues): You might find an answer to your question by searching current or closed issues.
|
||||
* [Search in Issues](https://github.com/arendst/Tasmota/issues): You might find an answer to your question by searching current or closed issues.
|
||||
|
||||
## Developers' Community:
|
||||
|
||||
* [Bug Report](https://github.com/arendst/Sonoff-Tasmota/issues/new?template=Bug_report.md): For reporting Bugs of Tasmota Software.
|
||||
* [Feature Request](https://github.com/arendst/Sonoff-Tasmota/issues/new?template=Feature_request.md): For requesting features/functions to Tasmota Software.
|
||||
* [Troubleshooting](https://github.com/arendst/Sonoff-Tasmota/issues/new?template=Custom.md): As a last resort, you can open new *Troubleshooting* issue on GitHub if the solution could not be found using the other channels. Just remember: the more info you provide the more chances you'll have to get an accurate answer.
|
||||
* [Issue a question](https://github.com/arendst/Sonoff-Tasmota/issues/new/choose): As a last resort, you can open a new *Question* issue on GitHub if the answer could not be found using the other channels. Just remember: the more info you provide the more chances you'll have to get an accurate answer.
|
||||
* [Bug Report](https://github.com/arendst/Tasmota/issues/new?template=Bug_report.md): For reporting Bugs of Tasmota Software.
|
||||
* [Feature Request](https://github.com/arendst/Tasmota/issues/new?template=Feature_request.md): For requesting features/functions to Tasmota Software.
|
||||
* [Troubleshooting](https://github.com/arendst/Tasmota/issues/new?template=Custom.md): As a last resort, you can open new *Troubleshooting* issue on GitHub if the solution could not be found using the other channels. Just remember: the more info you provide the more chances you'll have to get an accurate answer.
|
||||
* [Issue a question](https://github.com/arendst/Tasmota/issues/new/choose): As a last resort, you can open a new *Question* issue on GitHub if the answer could not be found using the other channels. Just remember: the more info you provide the more chances you'll have to get an accurate answer.
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
# Docker container for tasmota builds
|
||||
This Container will setup a proper build environment for [Sonoff-Tasmota](https://github.com/arendst/Sonoff-Tasmota)
|
||||
This Container will setup a proper build environment for [Tasmota](https://github.com/arendst/Tasmota)
|
||||
|
||||
## Create container
|
||||
`docker build -t mytasmota:latest .`
|
||||
|
|
@ -8,19 +8,19 @@ This Container will setup a proper build environment for [Sonoff-Tasmota](https:
|
|||
Use instead of the container `mytasmota:latest` the published container `eddyhub/docker-tasmota:latest` from docker hub.
|
||||
|
||||
## Build all development binaries
|
||||
`git clone https://github.com/arendst/Sonoff-Tasmota.git`
|
||||
`docker run -ti --rm -v $(pwd)/Sonoff-Tasmota:/tasmota -u $UID:$GID mytasmota:latest`
|
||||
`git clone https://github.com/arendst/Tasmota.git`
|
||||
`docker run -ti --rm -v $(pwd)/Tasmota:/tasmota -u $UID:$GID mytasmota:latest`
|
||||
|
||||
## Build a specific binary with custom options
|
||||
Checkout Sonoff-Tasmota: `git clone https://github.com/arendst/Sonoff-Tasmota.git`
|
||||
Mount the source as volume in `/tasmota`. **Prefix** any parameter available in `Sonoff-Tasmota/sonoff/my_user_config.h` with `TASMOTA_` as a environment variable for the container. **Also don't forget to escape what needs to be escaped in your shell.** **Strings** should be in **double quotes**. My config example:
|
||||
`docker run -ti --rm -v $(pwd)/Sonoff-Tasmota:/tasmota -e TASMOTA_STA_SSID1='"my-wifi"' -e TASMOTA_STA_PASS1='"my-wifi-password"' -e TASMOTA_MQTT_HOST='my-mqtt-host' -e TASMOTA_MQTT_USER='"my-mqtt-user"' -e TASMOTA_MQTT_PASS='"my-mqtt-password"' -e TASMOTA_WEB_PASSWORD='"my-web-password"' -u $UID:$GID mytasmota:latest --environment sonoff-DE
|
||||
Checkout Tasmota: `git clone https://github.com/arendst/Tasmota.git`
|
||||
Mount the source as volume in `/tasmota`. **Prefix** any parameter available in `Tasmota/sonoff/my_user_config.h` with `TASMOTA_` as a environment variable for the container. **Also don't forget to escape what needs to be escaped in your shell.** **Strings** should be in **double quotes**. My config example:
|
||||
`docker run -ti --rm -v $(pwd)/Tasmota:/tasmota -e TASMOTA_STA_SSID1='"my-wifi"' -e TASMOTA_STA_PASS1='"my-wifi-password"' -e TASMOTA_MQTT_HOST='my-mqtt-host' -e TASMOTA_MQTT_USER='"my-mqtt-user"' -e TASMOTA_MQTT_PASS='"my-mqtt-password"' -e TASMOTA_WEB_PASSWORD='"my-web-password"' -u $UID:$GID mytasmota:latest --environment sonoff-DE
|
||||
|
||||
Now you should have the file Sonoff-Tasmota/.pioenvs/sonoff-DE/firmware.bin which can be flashed on your device.
|
||||
Now you should have the file Tasmota/.pioenvs/sonoff-DE/firmware.bin which can be flashed on your device.
|
||||
|
||||
## Build a specific version of tasmota
|
||||
Checkout out the needed version before using the build instructions above:
|
||||
- `git clone https://github.com/arendst/Sonoff-Tasmota.git`
|
||||
- `git -C Sonoff-Tasmota checkout v6.6.0`
|
||||
- `git clone https://github.com/arendst/Tasmota.git`
|
||||
- `git -C Tasmota checkout v6.6.0`
|
||||
Build it:
|
||||
- `docker run -ti --rm -v $(pwd)/Sonoff-Tasmota:/tasmota -u $UID:$GID mytasmota:latest`
|
||||
- `docker run -ti --rm -v $(pwd)/Tasmota:/tasmota -u $UID:$GID mytasmota:latest`
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
// 8/24/2011 by Jeff Rowberg <jeff@rowberg.net>
|
||||
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
|
||||
//
|
||||
// Adapted for Sonoff-Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
// Adapted for Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
//
|
||||
// Changelog:
|
||||
// ... - ongoing debug release
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@
|
|||
|
||||
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
|
||||
//
|
||||
// Adapted for Sonoff-Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
// Adapted for Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
//
|
||||
// Changelog:
|
||||
// ... - ongoing debug release
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
// 5/20/2013 by Jeff Rowberg <jeff@rowberg.net>
|
||||
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
|
||||
//
|
||||
// Adapted for Sonoff-Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
// Adapted for Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
//
|
||||
// Changelog:
|
||||
// ... - ongoing debug release
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
// 6/18/2012 by Jeff Rowberg <jeff@rowberg.net>
|
||||
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
|
||||
//
|
||||
// Adapted for Sonoff-Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
// Adapted for Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
//
|
||||
// Changelog:
|
||||
// ... - ongoing debug release
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
// 6/5/2012 by Jeff Rowberg <jeff@rowberg.net>
|
||||
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
|
||||
//
|
||||
// Adapted for Sonoff-Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
// Adapted for Tasmota by Oliver Welter <contact@verbotene.zone> 02-04-2018
|
||||
//
|
||||
// Changelog:
|
||||
// 2012-06-05 - add 3D math helper file to DMP6 example sketch
|
||||
|
|
|
|||
|
|
@ -0,0 +1,34 @@
|
|||
---
|
||||
name: Bug report
|
||||
about: Create a report to help us improve
|
||||
|
||||
---
|
||||
|
||||
**NOTE: If you are seeking help or have questions, this is NOT the place to do it.** For questions and support, jump on Gitter and ask away.
|
||||
[](https://gitter.im/Makuna/NeoPixelBus?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge)
|
||||
|
||||
**Describe the bug**
|
||||
A clear and concise description of what the bug is.
|
||||
|
||||
**To Reproduce**
|
||||
Steps to reproduce the behavior:
|
||||
1. Go to '...'
|
||||
2. Click on '....'
|
||||
3. Scroll down to '....'
|
||||
4. See error
|
||||
|
||||
**Expected behavior**
|
||||
A clear and concise description of what you expected to happen.
|
||||
|
||||
**Development environment (please complete the following information):**
|
||||
- OS: [e.g. Win10]
|
||||
- Build Environment [e.g. Arduino IDE v.1.8.10]
|
||||
- Board target [e.g. AVR Mege 2560, v 1.10.31 ] - you will need to check the board manager for this.
|
||||
- Library version [e.g. v2.3.4] - you will need to check the library manager for this. If you used github to clone it, mention this and include the reference.
|
||||
|
||||
**Minimal Sketch that reproduced the problem:**
|
||||
If an example will demonstrate the problem, list which example you used.
|
||||
If its your sketch, take the time to remove unneeded parts and minimize it to the smallest sketch that reproduces the problem. Then include the sketch here using `code` markup. Start with a line with three single left quotes and then end with a line with three single left quotes.
|
||||
|
||||
**Additional context**
|
||||
Add any other context about the problem here.
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
---
|
||||
name: Feature request
|
||||
about: Suggest an idea for this project
|
||||
|
||||
---
|
||||
|
||||
**NOTE: If you are seeking help or have questions, this is NOT the place to do it.** For questions and support, jump on Gitter and ask away.
|
||||
[](https://gitter.im/Makuna/NeoPixelBus?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge)
|
||||
|
||||
**Is your feature request related to a problem? Please describe.**
|
||||
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
|
||||
|
||||
**Describe the solution you'd like**
|
||||
A clear and concise description of what you want to happen.
|
||||
|
||||
**Describe alternatives you've considered**
|
||||
A clear and concise description of any alternative solutions or features you've considered.
|
||||
|
||||
**Additional context**
|
||||
Add any other context or screenshots about the feature request here.
|
||||
|
|
@ -8,7 +8,7 @@
|
|||
"repository":
|
||||
{
|
||||
"type": "git",
|
||||
"url": "https://github.com/arendst/Sonoff-Tasmota/lib/TasmotaModbus"
|
||||
"url": "https://github.com/arendst/Tasmota/lib/TasmotaModbus"
|
||||
},
|
||||
"frameworks": "arduino",
|
||||
"platforms": "espressif8266"
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
"repository":
|
||||
{
|
||||
"type": "git",
|
||||
"url": "https://github.com/arendst/Sonoff-Tasmota/lib/TasmotaSerial"
|
||||
"url": "https://github.com/arendst/Tasmota/lib/TasmotaSerial"
|
||||
},
|
||||
"frameworks": "arduino",
|
||||
"platforms": "espressif8266"
|
||||
|
|
|
|||
|
|
@ -1,36 +0,0 @@
|
|||
|
||||
This directory is intended for the project specific (private) libraries.
|
||||
PlatformIO will compile them to static libraries and link to executable file.
|
||||
|
||||
The source code of each library should be placed in separate directory, like
|
||||
"lib/private_lib/[here are source files]".
|
||||
|
||||
For example, see how can be organized `Foo` and `Bar` libraries:
|
||||
|
||||
|--lib
|
||||
| |--Bar
|
||||
| | |--docs
|
||||
| | |--examples
|
||||
| | |--src
|
||||
| | |- Bar.c
|
||||
| | |- Bar.h
|
||||
| |--Foo
|
||||
| | |- Foo.c
|
||||
| | |- Foo.h
|
||||
| |- readme.txt --> THIS FILE
|
||||
|- platformio.ini
|
||||
|--src
|
||||
|- main.c
|
||||
|
||||
Then in `src/main.c` you should use:
|
||||
|
||||
#include <Foo.h>
|
||||
#include <Bar.h>
|
||||
|
||||
// rest H/C/CPP code
|
||||
|
||||
PlatformIO will find your libraries automatically, configure preprocessor's
|
||||
include paths and build them.
|
||||
|
||||
More information about PlatformIO Library Dependency Finder
|
||||
- http://docs.platformio.org/page/librarymanager/ldf.html
|
||||
|
|
@ -8,7 +8,7 @@
|
|||
; http://docs.platformio.org/en/stable/projectconf.html
|
||||
|
||||
[platformio]
|
||||
src_dir = sonoff
|
||||
src_dir = tasmota
|
||||
build_dir = .pioenvs
|
||||
build_cache_dir = .cache
|
||||
|
||||
|
|
|
|||
|
|
@ -233,7 +233,7 @@
|
|||
* Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689)
|
||||
* Add command SetOption65 0/1 and more Tuya Serial based device support (#5815)
|
||||
* Add command WebColor to change GUI colors on the fly
|
||||
* Add support for AWS IoT with TLS 1.2 on core 2.4.2 and up. Full doc here: https://github.com/arendst/Sonoff-Tasmota/wiki/AWS-IoT
|
||||
* Add support for AWS IoT with TLS 1.2 on core 2.4.2 and up. Full doc here: https://github.com/arendst/Tasmota/wiki/AWS-IoT
|
||||
* Add support for Badger HR-E Water Meter (#5539)
|
||||
* Add support for Shelly 2.5 Energy and overtemp Monitoring (#5592)
|
||||
* Add support for color and colortone for Philips Hue emulation via Alexa (#5600 #4809)
|
||||
|
|
@ -583,7 +583,7 @@
|
|||
* Revert sonoff-minimal removals causing failure of wifi connection (#3177)
|
||||
*
|
||||
* 6.1.0 20180706
|
||||
* Remove version 3, 4 and pre 5.2 settings auto-upgrade. See https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path
|
||||
* Remove version 3, 4 and pre 5.2 settings auto-upgrade. See https://github.com/arendst/Tasmota/wiki/Upgrade#migration-path
|
||||
* Change default CFG_HOLDER from 0x20161209 to 4617 (=0x1209) - no impact on default upgrades
|
||||
* Change number of supported switches from 4 to 8 (#2885, #3086)
|
||||
* Change BME680 driver from Adafruit to Bosch BME680 library (#2969)
|
||||
|
|
@ -1175,7 +1175,7 @@
|
|||
* 5.0.5 20170508
|
||||
* Add command FullTopic with tokens %topic% (replaced by command Topic value) and
|
||||
* %prefix% (replaced by command Prefix<x> values) for more flexible topic definitions (#244)
|
||||
* See wiki > MQTT Features https://github.com/arendst/Sonoff-Tasmota/wiki/MQTT-Features for more information
|
||||
* See wiki > MQTT Features https://github.com/arendst/Tasmota/wiki/MQTT-Features for more information
|
||||
*
|
||||
* 5.0.4 20170505
|
||||
* Add Sonoff Pow Energy Total up to 40 MWh
|
||||
|
|
@ -47,10 +47,10 @@
|
|||
#define CFG_HOLDER 4617 // [Reset 1] Change this value (max 32000) to load SECTION1 configuration parameters to flash
|
||||
|
||||
// -- Project -------------------------------------
|
||||
#define PROJECT "sonoff" // PROJECT is used as the default topic delimiter
|
||||
#define PROJECT "tasmota" // PROJECT is used as the default topic delimiter
|
||||
|
||||
// If not selected the default will be SONOFF_BASIC
|
||||
//#define MODULE SONOFF_BASIC // [Module] Select default model from sonoff_template.h
|
||||
//#define MODULE SONOFF_BASIC // [Module] Select default model from tasmota_template.h
|
||||
|
||||
#define SAVE_DATA 1 // [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds)
|
||||
#define SAVE_STATE 1 // [SetOption0] Save changed power state to Flash (0 = disable, 1 = enable)
|
||||
|
|
@ -106,13 +106,13 @@
|
|||
#define MQTT_FULLTOPIC "%prefix%/%topic%/" // [FullTopic] Subscribe and Publish full topic name - Legacy topic
|
||||
|
||||
// %prefix% token options
|
||||
#define SUB_PREFIX "cmnd" // [Prefix1] Sonoff devices subscribe to %prefix%/%topic% being SUB_PREFIX/MQTT_TOPIC and SUB_PREFIX/MQTT_GRPTOPIC
|
||||
#define PUB_PREFIX "stat" // [Prefix2] Sonoff devices publish to %prefix%/%topic% being PUB_PREFIX/MQTT_TOPIC
|
||||
#define PUB_PREFIX2 "tele" // [Prefix3] Sonoff devices publish telemetry data to %prefix%/%topic% being PUB_PREFIX2/MQTT_TOPIC/UPTIME, POWER and TIME
|
||||
#define SUB_PREFIX "cmnd" // [Prefix1] Tasmota devices subscribe to %prefix%/%topic% being SUB_PREFIX/MQTT_TOPIC and SUB_PREFIX/MQTT_GRPTOPIC
|
||||
#define PUB_PREFIX "stat" // [Prefix2] Tasmota devices publish to %prefix%/%topic% being PUB_PREFIX/MQTT_TOPIC
|
||||
#define PUB_PREFIX2 "tele" // [Prefix3] Tasmota devices publish telemetry data to %prefix%/%topic% being PUB_PREFIX2/MQTT_TOPIC/UPTIME, POWER and TIME
|
||||
// May be named the same as PUB_PREFIX
|
||||
// %topic% token options (also ButtonTopic and SwitchTopic)
|
||||
#define MQTT_TOPIC PROJECT // [Topic] (unique) MQTT device topic, set to 'PROJECT "_%06X"' for unique topic including device MAC address
|
||||
#define MQTT_GRPTOPIC "sonoffs" // [GroupTopic] MQTT Group topic
|
||||
#define MQTT_GRPTOPIC "tasmotas" // [GroupTopic] MQTT Group topic
|
||||
#define MQTT_BUTTON_TOPIC "0" // [ButtonTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_BTN_%06X"' for unique topic including device MAC address
|
||||
#define MQTT_SWITCH_TOPIC "0" // [SwitchTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_SW_%06X"' for unique topic including device MAC address
|
||||
#define MQTT_CLIENT_ID "DVES_%06X" // [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address
|
||||
|
|
@ -130,7 +130,7 @@
|
|||
// -- HTTP ----------------------------------------
|
||||
#define WEB_SERVER 2 // [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)
|
||||
#define WEB_PASSWORD "" // [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)
|
||||
#define FRIENDLY_NAME "Sonoff" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
|
||||
#define FRIENDLY_NAME "Tasmota" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
|
||||
#define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
|
||||
// HTML hex color codes. Only 3 and 6 digit hex string values are supported!! See https://www.w3schools.com/colors/colors_hex.asp
|
||||
#define COLOR_TEXT "#000" // [WebColor1] Global text color - Black
|
||||
|
|
@ -263,7 +263,7 @@
|
|||
// #define USE_MQTT_TLS_CA_CERT // Force full CA validation instead of fingerprints, slower, but simpler to use (+2.2k code, +1.9k mem during connection handshake)
|
||||
// #define USE_MQTT_TLS_FORCE_EC_CIPHER // Force Elliptic Curve cipher (higher security) required by some servers (automatically enabled with USE_MQTT_AWS_IOT) (+11.4k code, +0.4k mem)
|
||||
// #define USE_MQTT_AWS_IOT // Enable MQTT for AWS IoT - requires a private key (+11.9k code, +0.4k mem)
|
||||
// Note: you need to generate a private key + certificate per device and update 'sonoff/sonoff_aws_iot.cpp'
|
||||
// Note: you need to generate a private key + certificate per device and update 'tasmota/tasmota_aws_iot.cpp'
|
||||
// Full documentation here: https://github.com/arendst/Tasmota/wiki/AWS-IoT
|
||||
|
||||
// -- KNX IP Protocol -----------------------------
|
||||
|
|
@ -551,7 +551,7 @@
|
|||
|
||||
/*********************************************************************************************\
|
||||
* Optional firmware configurations
|
||||
* Select none or just one for optional features and sensors as configured in sonoff_post.h
|
||||
* Select none or just one for optional features and sensors as configured in tasmota_post.h
|
||||
* See RELEASENOTES.md for selected features
|
||||
\*********************************************************************************************/
|
||||
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
sonoff.h - Master header file for Tasmota
|
||||
tasmota.h - Master header file for Tasmota
|
||||
|
||||
Copyright (C) 2019 Theo Arends
|
||||
|
||||
|
|
@ -17,8 +17,8 @@
|
|||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _SONOFF_H_
|
||||
#define _SONOFF_H_
|
||||
#ifndef _TASMOTA_H_
|
||||
#define _TASMOTA_H_
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Performance ROM (PROGMEM) vs RAM (RODATA)
|
||||
|
|
@ -285,4 +285,4 @@ const char kCommandSource[] PROGMEM = "I|MQTT|Restart|Button|Switch|Backlog|Seri
|
|||
|
||||
const uint8_t kDefaultRfCode[9] PROGMEM = { 0x21, 0x16, 0x01, 0x0E, 0x03, 0x48, 0x2E, 0x1A, 0x00 };
|
||||
|
||||
#endif // _SONOFF_H_
|
||||
#endif // _TASMOTA_H_
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
sonoff.ino - Tasmota firmware for iTead Sonoff, Wemos and NodeMCU hardware
|
||||
tasmota.ino - Tasmota firmware for iTead Sonoff, Wemos and NodeMCU hardware
|
||||
|
||||
Copyright (C) 2019 Theo Arends
|
||||
|
||||
|
|
@ -27,15 +27,15 @@
|
|||
|
||||
// Location specific includes
|
||||
#include <core_version.h> // Arduino_Esp8266 version information (ARDUINO_ESP8266_RELEASE and ARDUINO_ESP8266_RELEASE_2_3_0)
|
||||
#include "sonoff_version.h" // Tasmota version information
|
||||
#include "sonoff.h" // Enumeration used in my_user_config.h
|
||||
#include "tasmota_version.h" // Tasmota version information
|
||||
#include "tasmota.h" // Enumeration used in my_user_config.h
|
||||
#include "my_user_config.h" // Fixed user configurable options
|
||||
#ifdef USE_MQTT_TLS
|
||||
#include <t_bearssl.h> // we need to include before "sonoff_post.h" to take precedence over the BearSSL version in Arduino
|
||||
#include <t_bearssl.h> // we need to include before "tasmota_post.h" to take precedence over the BearSSL version in Arduino
|
||||
#endif // USE_MQTT_TLS
|
||||
#include "sonoff_post.h" // Configuration overrides for all previous includes
|
||||
#include "tasmota_post.h" // Configuration overrides for all previous includes
|
||||
#include "i18n.h" // Language support configured by my_user_config.h
|
||||
#include "sonoff_template.h" // Hardware configuration
|
||||
#include "tasmota_template.h" // Hardware configuration
|
||||
|
||||
|
||||
#ifdef ARDUINO_ESP8266_RELEASE_2_4_0
|
||||
|
|
@ -102,7 +102,7 @@ int baudrate = APP_BAUDRATE; // Serial interface baud rate
|
|||
int serial_in_byte_counter = 0; // Index in receive buffer
|
||||
int ota_state_flag = 0; // OTA state flag
|
||||
int ota_result = 0; // OTA result
|
||||
int restart_flag = 0; // Sonoff restart flag
|
||||
int restart_flag = 0; // Tasmota restart flag
|
||||
int wifi_state_flag = WIFI_RESTART; // Wifi state flag
|
||||
int tele_period = 1; // Tele period timer
|
||||
int blinks = 201; // Number of LED blinks
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
sonoff_ca.ino - Certificate authorities for Tasmota, LetsEncrypt and AWS
|
||||
tasmota_ca.ino - Certificate authorities for Tasmota, LetsEncrypt and AWS
|
||||
|
||||
Copyright (C) 2019 Theo Arends
|
||||
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
sonoff_post.h - Post header file for Tasmota
|
||||
tasmota_post.h - Post header file for Tasmota
|
||||
|
||||
Copyright (C) 2019 Theo Arends
|
||||
|
||||
|
|
@ -17,8 +17,8 @@
|
|||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _SONOFF_POST_H_
|
||||
#define _SONOFF_POST_H_
|
||||
#ifndef _TASMOTA_POST_H_
|
||||
#define _TASMOTA_POST_H_
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Function declarations
|
||||
|
|
@ -664,4 +664,4 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
#define DEBUG_SENSOR_LOG(...)
|
||||
#endif
|
||||
|
||||
#endif // _SONOFF_POST_H_
|
||||
#endif // _TASMOTA_POST_H_
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
sonoff_template.h - template settings for Tasmota
|
||||
tasmota_template.h - template settings for Tasmota
|
||||
|
||||
Copyright (C) 2019 Theo Arends
|
||||
|
||||
|
|
@ -17,8 +17,8 @@
|
|||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _SONOFF_TEMPLATE_H_
|
||||
#define _SONOFF_TEMPLATE_H_
|
||||
#ifndef _TASMOTA_TEMPLATE_H_
|
||||
#define _TASMOTA_TEMPLATE_H_
|
||||
|
||||
// User selectable GPIO functionality
|
||||
// ATTENTION: Only add at the end of this list just before GPIO_SENSOR_END
|
||||
|
|
@ -2163,4 +2163,4 @@ const mytmplt kModules[MAXMODULE] PROGMEM = {
|
|||
}
|
||||
};
|
||||
|
||||
#endif // _SONOFF_TEMPLATE_H_
|
||||
#endif // _TASMOTA_TEMPLATE_H_
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
sonoff_version.h - Version header file for Tasmota
|
||||
tasmota_version.h - Version header file for Tasmota
|
||||
|
||||
Copyright (C) 2019 Theo Arends
|
||||
|
||||
|
|
@ -17,9 +17,9 @@
|
|||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _SONOFF_VERSION_H_
|
||||
#define _SONOFF_VERSION_H_
|
||||
#ifndef _TASMOTA_VERSION_H_
|
||||
#define _TASMOTA_VERSION_H_
|
||||
|
||||
const uint32_t VERSION = 0x06070101;
|
||||
|
||||
#endif // _SONOFF_VERSION_H_
|
||||
#endif // _TASMOTA_VERSION_H_
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue