mirror of https://github.com/arendst/Tasmota.git
v5.9.1j - Add Dual R2, Rewrite DS18x20 and fixes
5.9.1j
* Revert changes to xsns_05_ds18x20.ino and rename to
xsns_05_ds18x20_legacy.ino still needing library OneWire and providing
legacy JSON message:
*
"DS18x20":{"DS1":{"Type":"DS18B20","Address":"284CC48E04000079","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"283AC28304000052","Temperature":19.6}}
* Add new xdrv_05_ds18x20.ino free from library OneWire and add the
following features:
* Add support for DS1822
* Add forced setting of
12-bit resolution for selected device types (#1222)
* Add read
temperature retry counter (#1215)
* Fix lost sensors by performing
sensor probe at restart only thereby removing dynamic sensor probe
(#1215)
* Fix sensor address sorting using ascending sort on sensor
type followed by sensor address
* Rewrite JSON resulting in shorter
message allowing more sensors in default firmware image:
*
"DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}
* Add additional define in user_config.h to select either single sensor
(defines disabled), new multi sensor (USE_DS18X20) or legacy multi
sensor (USE_DS18X20_LEGACY)
* Add support for Sonoff Dual R2 (#1249)
*
Fix ADS1115 detection (#1258)
This commit is contained in:
arendst
parent
4d3b696c80
commit
0f531e24e5
|
|
@ -1,7 +1,7 @@
|
|||
## Sonoff-Tasmota
|
||||
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
|
||||
|
||||
Current version is **5.9.1i** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
Current version is **5.9.1j** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
|
||||
### ATTENTION All versions
|
||||
|
||||
|
|
|
|||
|
|
@ -92,7 +92,7 @@ framework = arduino
|
|||
board = esp01_1m
|
||||
board_flash_mode = dout
|
||||
build_flags = -Wl,-Tesp8266.flash.1m0.ld -DMQTT_MAX_PACKET_SIZE=707 -DUSE_DS18x20 -DMESSZ=600
|
||||
lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON, OneWire
|
||||
lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
|
||||
|
||||
; Serial Monitor options
|
||||
monitor_baud = 115200
|
||||
|
|
|
|||
|
|
@ -1,6 +1,24 @@
|
|||
/* 5.9.1i
|
||||
/* 5.9.1j
|
||||
* Revert changes to xsns_05_ds18x20.ino and rename to xsns_05_ds18x20_legacy.ino still needing library OneWire and providing legacy JSON message:
|
||||
* "DS18x20":{"DS1":{"Type":"DS18B20","Address":"284CC48E04000079","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"283AC28304000052","Temperature":19.6}}
|
||||
* Add new xdrv_05_ds18x20.ino free from library OneWire and add the following features:
|
||||
* Add support for DS1822
|
||||
* Add forced setting of 12-bit resolution for selected device types (#1222)
|
||||
* Add read temperature retry counter (#1215)
|
||||
* Fix lost sensors by performing sensor probe at restart only thereby removing dynamic sensor probe (#1215)
|
||||
* Fix sensor address sorting using ascending sort on sensor type followed by sensor address
|
||||
* Rewrite JSON resulting in shorter message allowing more sensors in default firmware image:
|
||||
* "DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}
|
||||
* Add additional define in user_config.h to select either single sensor (defines disabled), new multi sensor (USE_DS18X20) or legacy multi sensor (USE_DS18X20_LEGACY)
|
||||
* Add support for Sonoff Dual R2 (#1249)
|
||||
* Fix ADS1115 detection (#1258)
|
||||
*
|
||||
* 5.9.1i
|
||||
* Fix Arilux LC11 restart exception 0 after OTA upgrade
|
||||
* Disabled CRC lookup-table in OneWire.h (#define ONEWIRE_CRC8_TABLE 0) to save some code space
|
||||
* Change DS18x20 JSON message using less characters
|
||||
* from "DS18x20":{"DS1":{"Type":"DS18B20","Address":"284CC48E04000079","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"283AC28304000052","Temperature":19.6}}
|
||||
* into "DS18x20":{"DS1":{"Type":"DS18B20","Address":"0000048EC44C","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"00000483C23A","Temperature":19.6}}
|
||||
* Rewrite xsns_05_ds18x20.ino adding support for DS1822, correct address calculation and force setting 12-bit resolution (#1222)
|
||||
* DS18x20 sensor reconfiguration now only probed at restart removing dynamic connection and intermittent sensor loss (#1215)
|
||||
*
|
||||
|
|
|
|||
|
|
@ -107,6 +107,7 @@
|
|||
#define D_HOST "host"
|
||||
#define D_HOSTNAME "Hostname"
|
||||
#define D_HUMIDITY "Feuchtigkeit"
|
||||
#define D_ID "ID"
|
||||
#define D_ILLUMINANCE "Beleuchtungsintensität"
|
||||
#define D_IMMEDIATE "direkt" // Button immediate
|
||||
#define D_INDEX "Index"
|
||||
|
|
@ -437,7 +438,7 @@
|
|||
#define D_ENERGY_YESTERDAY "Energie gestern"
|
||||
#define D_ENERGY_TOTAL "Energie insgesamt"
|
||||
|
||||
// xsns_05_ds18x20.ino
|
||||
// xsns_05_ds18b20.ino
|
||||
#define D_SENSOR_BUSY "Sensor beschäftigt"
|
||||
#define D_SENSOR_CRC_ERROR "Sensor CRC-Fehler"
|
||||
#define D_SENSORS_FOUND "Sensor gefunden"
|
||||
|
|
|
|||
|
|
@ -107,6 +107,7 @@
|
|||
#define D_HOST "Host"
|
||||
#define D_HOSTNAME "Hostname"
|
||||
#define D_HUMIDITY "Humidity"
|
||||
#define D_ID "Id"
|
||||
#define D_ILLUMINANCE "Illuminance"
|
||||
#define D_IMMEDIATE "immediate" // Button immediate
|
||||
#define D_INDEX "Index"
|
||||
|
|
@ -437,7 +438,7 @@
|
|||
#define D_ENERGY_YESTERDAY "Energy Yesterday"
|
||||
#define D_ENERGY_TOTAL "Energy Total"
|
||||
|
||||
// xsns_05_ds18x20.ino
|
||||
// xsns_05_ds18b20.ino
|
||||
#define D_SENSOR_BUSY "Sensor busy"
|
||||
#define D_SENSOR_CRC_ERROR "Sensor CRC error"
|
||||
#define D_SENSORS_FOUND "Sensors found"
|
||||
|
|
|
|||
|
|
@ -107,6 +107,7 @@
|
|||
#define D_HOST "Host"
|
||||
#define D_HOSTNAME "Hostnaam"
|
||||
#define D_HUMIDITY "Luchtvochtigheid"
|
||||
#define D_ID "Id"
|
||||
#define D_ILLUMINANCE "Verlichtingssterkte"
|
||||
#define D_IMMEDIATE "onmiddelijk" // Button immediate
|
||||
#define D_INDEX "Index"
|
||||
|
|
@ -437,7 +438,7 @@
|
|||
#define D_ENERGY_YESTERDAY "Verbruik gisteren"
|
||||
#define D_ENERGY_TOTAL "Verbruik totaal"
|
||||
|
||||
// xsns_05_ds18x20.ino
|
||||
// xsns_05_ds18b20.ino
|
||||
#define D_SENSOR_BUSY "Sensor bezet"
|
||||
#define D_SENSOR_CRC_ERROR "Sensor CRC fout"
|
||||
#define D_SENSORS_FOUND "Aantal sensoren"
|
||||
|
|
|
|||
|
|
@ -107,6 +107,7 @@
|
|||
#define D_HOST "Serwer"
|
||||
#define D_HOSTNAME "Nazwa serwera"
|
||||
#define D_HUMIDITY "Wilgotnosc"
|
||||
#define D_ID "ID"
|
||||
#define D_ILLUMINANCE "Oswietlenie"
|
||||
#define D_IMMEDIATE "Natychmiastowe" // Button immediate
|
||||
#define D_INDEX "Indeks"
|
||||
|
|
@ -437,7 +438,7 @@
|
|||
#define D_ENERGY_YESTERDAY "Energia Wczoraj"
|
||||
#define D_ENERGY_TOTAL "Energia suma"
|
||||
|
||||
// xsns_05_ds18x20.ino
|
||||
// xsns_05_ds18b20.ino
|
||||
#define D_SENSOR_BUSY "Czujnik DS18x20 zajety"
|
||||
#define D_SENSOR_CRC_ERROR "Czujnik DS18x20 blad CRC"
|
||||
#define D_SENSORS_FOUND "Znaleziono Czujnik DS18x20"
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@
|
|||
- Select IDE Tools - Flash Size: "1M (no SPIFFS)"
|
||||
====================================================*/
|
||||
|
||||
#define VERSION 0x05090109 // 5.9.1i
|
||||
#define VERSION 0x0509010A // 5.9.1j
|
||||
|
||||
// Location specific includes
|
||||
#include "sonoff.h" // Enumaration used in user_config.h
|
||||
|
|
|
|||
|
|
@ -34,9 +34,12 @@ void WifiWpsStatusCallback(wps_cb_status status);
|
|||
#endif
|
||||
|
||||
#define USE_DHT // Default DHT11 sensor needs no external library
|
||||
#ifndef USE_DS18x20
|
||||
|
||||
#if defined(USE_DS18x20) || defined(USE_DS18x20_LEGACY)
|
||||
#else
|
||||
#define USE_DS18B20 // Default DS18B20 sensor needs no external library
|
||||
#endif
|
||||
|
||||
//#define DEBUG_THEO // Add debug code
|
||||
|
||||
#ifdef BE_MINIMAL
|
||||
|
|
@ -94,9 +97,8 @@ void WifiWpsStatusCallback(wps_cb_status status);
|
|||
#endif
|
||||
|
||||
#ifndef MESSZ
|
||||
#define MESSZ 405 // Max number of characters in JSON message string (4 x DS18x20 sensors)
|
||||
#define MESSZ 405 // Max number of characters in JSON message string (6 x DS18x20 sensors)
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
#endif // _SONOFF_POST_H_
|
||||
|
|
@ -196,6 +196,7 @@ enum SupportedModules {
|
|||
KMC_70011,
|
||||
ARILUX_LC01,
|
||||
ARILUX_LC11,
|
||||
SONOFF_DUAL_R2,
|
||||
MAXMODULE };
|
||||
|
||||
/********************************************************************************************/
|
||||
|
|
@ -218,6 +219,7 @@ const uint8_t kNiceList[MAXMODULE] PROGMEM = {
|
|||
SONOFF_RF,
|
||||
SONOFF_TH,
|
||||
SONOFF_DUAL,
|
||||
SONOFF_DUAL_R2,
|
||||
SONOFF_POW,
|
||||
SONOFF_4CH,
|
||||
SONOFF_4CHPRO,
|
||||
|
|
@ -761,6 +763,21 @@ const mytmplt kModules[MAXMODULE] PROGMEM = {
|
|||
GPIO_PWM3, // GPIO14 RGB LED Blue
|
||||
GPIO_ARIRFRCV, // GPIO15 RF receiver input
|
||||
0, 0
|
||||
},
|
||||
{ "Sonoff Dual R2", // Sonoff Dual R2 (ESP8285)
|
||||
GPIO_SWT1, // GPIO00 Button 1 on header
|
||||
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
|
||||
0,
|
||||
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
|
||||
0,
|
||||
GPIO_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On)
|
||||
0, 0, 0, // Flash connection
|
||||
GPIO_SWT2, // GPIO09 Button 2 on header
|
||||
GPIO_KEY1, // GPIO10 Button 3 on casing
|
||||
0, // Flash connection
|
||||
GPIO_REL1, // GPIO12 Relay 1 (0 = Off, 1 = On)
|
||||
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
|
||||
0, 0, 0, 0
|
||||
}
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -704,11 +704,13 @@ boolean MdnsDiscoverMqttServer()
|
|||
#ifdef USE_I2C
|
||||
#define I2C_RETRY_COUNTER 3
|
||||
|
||||
int32_t I2cRead(uint8_t addr, uint8_t reg, uint8_t size)
|
||||
{
|
||||
byte x = 0;
|
||||
int32_t data = 0;
|
||||
uint32_t i2c_buffer = 0;
|
||||
|
||||
bool I2cValidRead(uint8_t addr, uint8_t reg, uint8_t size)
|
||||
{
|
||||
byte x = I2C_RETRY_COUNTER;
|
||||
|
||||
i2c_buffer = 0;
|
||||
do {
|
||||
Wire.beginTransmission(addr); // start transmission to device
|
||||
Wire.write(reg); // sends register address to read from
|
||||
|
|
@ -716,34 +718,81 @@ int32_t I2cRead(uint8_t addr, uint8_t reg, uint8_t size)
|
|||
Wire.requestFrom((int)addr, (int)size); // send data n-bytes read
|
||||
if (Wire.available() == size) {
|
||||
for (byte i = 0; i < size; i++) {
|
||||
data <<= 8;
|
||||
data |= Wire.read(); // receive DATA
|
||||
i2c_buffer = i2c_buffer << 8 | Wire.read(); // receive DATA
|
||||
}
|
||||
}
|
||||
}
|
||||
x++;
|
||||
} while (Wire.endTransmission(true) != 0 && x <= I2C_RETRY_COUNTER); // end transmission
|
||||
return data;
|
||||
x--;
|
||||
} while (Wire.endTransmission(true) != 0 && x != 0); // end transmission
|
||||
return (x);
|
||||
}
|
||||
|
||||
bool I2cValidRead8(uint8_t *data, uint8_t addr, uint8_t reg)
|
||||
{
|
||||
bool status = I2cValidRead(addr, reg, 1);
|
||||
*data = (uint8_t)i2c_buffer;
|
||||
return status;
|
||||
}
|
||||
|
||||
bool I2cValidRead16(uint16_t *data, uint8_t addr, uint8_t reg)
|
||||
{
|
||||
bool status = I2cValidRead(addr, reg, 2);
|
||||
*data = (uint16_t)i2c_buffer;
|
||||
return status;
|
||||
}
|
||||
|
||||
bool I2cValidReadS16(int16_t *data, uint8_t addr, uint8_t reg)
|
||||
{
|
||||
bool status = I2cValidRead(addr, reg, 2);
|
||||
*data = (int16_t)i2c_buffer;
|
||||
return status;
|
||||
}
|
||||
|
||||
bool I2cValidRead16LE(uint16_t *data, uint8_t addr, uint8_t reg)
|
||||
{
|
||||
uint16_t ldata;
|
||||
bool status = I2cValidRead16(&ldata, addr, reg);
|
||||
*data = (ldata >> 8) | (ldata << 8);
|
||||
return status;
|
||||
}
|
||||
|
||||
bool I2cValidReadS16_LE(int16_t *data, uint8_t addr, uint8_t reg)
|
||||
{
|
||||
uint16_t ldata;
|
||||
bool status = I2cValidRead16LE(&ldata, addr, reg);
|
||||
*data = (int16_t)ldata;
|
||||
return status;
|
||||
}
|
||||
|
||||
bool I2cValidRead24(int32_t *data, uint8_t addr, uint8_t reg)
|
||||
{
|
||||
bool status = I2cValidRead(addr, reg, 3);
|
||||
*data = i2c_buffer;
|
||||
return status;
|
||||
}
|
||||
|
||||
uint8_t I2cRead8(uint8_t addr, uint8_t reg)
|
||||
{
|
||||
return I2cRead(addr, reg, 1);
|
||||
I2cValidRead(addr, reg, 1);
|
||||
return (uint8_t)i2c_buffer;
|
||||
}
|
||||
|
||||
uint16_t I2cRead16(uint8_t addr, uint8_t reg)
|
||||
{
|
||||
return I2cRead(addr, reg, 2);
|
||||
I2cValidRead(addr, reg, 2);
|
||||
return (uint16_t)i2c_buffer;
|
||||
}
|
||||
|
||||
int16_t I2cReadS16(uint8_t addr, uint8_t reg)
|
||||
{
|
||||
return (int16_t)I2cRead(addr, reg, 2);
|
||||
I2cValidRead(addr, reg, 2);
|
||||
return (int16_t)i2c_buffer;
|
||||
}
|
||||
|
||||
uint16_t I2cRead16LE(uint8_t addr, uint8_t reg)
|
||||
{
|
||||
uint16_t temp = I2cRead(addr, reg, 2);
|
||||
I2cValidRead(addr, reg, 2);
|
||||
uint16_t temp = (uint16_t)i2c_buffer;
|
||||
return (temp >> 8) | (temp << 8);
|
||||
}
|
||||
|
||||
|
|
@ -754,64 +803,34 @@ int16_t I2cReadS16_LE(uint8_t addr, uint8_t reg)
|
|||
|
||||
int32_t I2cRead24(uint8_t addr, uint8_t reg)
|
||||
{
|
||||
return I2cRead(addr, reg, 3);
|
||||
}
|
||||
/*
|
||||
void I2cWrite(uint8_t addr, uint8_t reg, uint32_t val, uint8_t size)
|
||||
{
|
||||
byte x = I2C_RETRY_COUNTER;
|
||||
int32_t data = val;
|
||||
|
||||
do {
|
||||
Wire.beginTransmission((uint8_t)addr); // start transmission to device
|
||||
Wire.write(reg); // sends register address to read from
|
||||
|
||||
for (byte i = 0; i < size; i++) {
|
||||
|
||||
I2cValidRead(addr, reg, 3);
|
||||
return i2c_buffer;
|
||||
}
|
||||
|
||||
Wire.write((val >> 8) & 0xFF); // write data
|
||||
Wire.write(val); // write data
|
||||
|
||||
x--;
|
||||
} while (Wire.endTransmission(true) != 0 && x != 0); // end transmission
|
||||
}
|
||||
*/
|
||||
void I2cWrite8v(uint8_t addr, uint8_t val)
|
||||
{
|
||||
byte x = I2C_RETRY_COUNTER;
|
||||
|
||||
do {
|
||||
Wire.beginTransmission((uint8_t)addr); // start transmission to device
|
||||
Wire.write(val); // write data
|
||||
x--;
|
||||
} while (Wire.endTransmission(true) != 0 && x != 0); // end transmission
|
||||
}
|
||||
|
||||
void I2cWrite8(uint8_t addr, uint8_t reg, uint8_t val)
|
||||
bool I2cWrite(uint8_t addr, uint8_t reg, uint32_t val, uint8_t size)
|
||||
{
|
||||
byte x = I2C_RETRY_COUNTER;
|
||||
|
||||
do {
|
||||
Wire.beginTransmission((uint8_t)addr); // start transmission to device
|
||||
Wire.write(reg); // sends register address to write to
|
||||
Wire.write(val); // write data
|
||||
uint8_t loops = size -1;
|
||||
do {
|
||||
Wire.write((val >> (8 * loops)) & 0xFF); // write data
|
||||
} while(--loops);
|
||||
x--;
|
||||
} while (Wire.endTransmission(true) != 0 && x != 0); // end transmission
|
||||
return (x);
|
||||
}
|
||||
|
||||
bool I2cWrite8(uint8_t addr, uint8_t reg, uint16_t val)
|
||||
{
|
||||
return I2cWrite(addr, reg, val, 1);
|
||||
}
|
||||
|
||||
bool I2cWrite16(uint8_t addr, uint8_t reg, uint16_t val)
|
||||
{
|
||||
byte x = I2C_RETRY_COUNTER;
|
||||
|
||||
do {
|
||||
Wire.beginTransmission((uint8_t)addr); // start transmission to device
|
||||
Wire.write(reg); // sends register address to write to
|
||||
Wire.write((val >> 8) & 0xFF); // write data
|
||||
Wire.write(val & 0xFF); // write data
|
||||
x--;
|
||||
} while (Wire.endTransmission(true) != 0 && x != 0); // end transmission
|
||||
return (x);
|
||||
return I2cWrite(addr, reg, val, 2);
|
||||
}
|
||||
|
||||
void I2cScan(char *devs, unsigned int devs_len)
|
||||
|
|
|
|||
|
|
@ -163,7 +163,9 @@
|
|||
// -- Sensor code selection -----------------------
|
||||
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
|
||||
//#define USE_DS18x20 // Optional for more than one DS18B20 and/or DS18S20 sensors using library OneWire (+1.5k code)
|
||||
// WARNING: Select none for default one sensor or enable one of the following two options for multiple sensors
|
||||
//#define USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1.3k code)
|
||||
//#define USE_DS18x20_LEGACY // Optional for more than one DS18B20 sensors using library OneWire (+1.5k code)
|
||||
|
||||
#define USE_I2C // I2C using library wire (+10k code, 0.2k mem) - Disable by //
|
||||
#define USE_SHT // Add I2C emulating code for SHT1X sensor
|
||||
|
|
|
|||
|
|
@ -19,175 +19,177 @@
|
|||
|
||||
#ifdef USE_DS18B20
|
||||
/*********************************************************************************************\
|
||||
* DS18B20 - Temperature
|
||||
*
|
||||
* Source: Marinus vd Broek https://github.com/ESP8266nu/ESPEasy and AlexTransit (CRC)
|
||||
* DS18B20 - Temperature - Single sensor
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define W1_SKIP_ROM 0xCC
|
||||
#define W1_CONVERT_TEMP 0x44
|
||||
#define W1_READ_SCRATCHPAD 0xBE
|
||||
|
||||
float ds18b20_last_temperature = 0;
|
||||
uint16_t ds18b20_last_result = 0;
|
||||
uint8_t ds18x20_pin = 0;
|
||||
|
||||
uint8_t Ds18b20Reset()
|
||||
/*********************************************************************************************\
|
||||
* Embedded stripped and tuned OneWire library
|
||||
\*********************************************************************************************/
|
||||
|
||||
uint8_t OneWireReset()
|
||||
{
|
||||
uint8_t r;
|
||||
uint8_t retries = 125;
|
||||
|
||||
pinMode(pin[GPIO_DSB], INPUT);
|
||||
do { // wait until the wire is high... just in case
|
||||
//noInterrupts();
|
||||
pinMode(ds18x20_pin, INPUT);
|
||||
do {
|
||||
if (--retries == 0) {
|
||||
return 0;
|
||||
}
|
||||
delayMicroseconds(2);
|
||||
} while (!digitalRead(pin[GPIO_DSB]));
|
||||
pinMode(pin[GPIO_DSB], OUTPUT);
|
||||
digitalWrite(pin[GPIO_DSB], LOW);
|
||||
delayMicroseconds(492); // Dallas spec. = Min. 480uSec. Arduino 500uSec.
|
||||
pinMode(pin[GPIO_DSB], INPUT); // Float
|
||||
delayMicroseconds(40);
|
||||
r = !digitalRead(pin[GPIO_DSB]);
|
||||
delayMicroseconds(420);
|
||||
} while (!digitalRead(ds18x20_pin));
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
delayMicroseconds(480);
|
||||
pinMode(ds18x20_pin, INPUT);
|
||||
delayMicroseconds(70);
|
||||
uint8_t r = !digitalRead(ds18x20_pin);
|
||||
//interrupts();
|
||||
delayMicroseconds(410);
|
||||
return r;
|
||||
}
|
||||
|
||||
uint8_t Ds18b20ReadBit(void)
|
||||
void OneWireWriteBit(uint8_t v)
|
||||
{
|
||||
uint8_t r;
|
||||
static const uint8_t delay_low[2] = { 65, 10 };
|
||||
static const uint8_t delay_high[2] = { 5, 55 };
|
||||
|
||||
pinMode(pin[GPIO_DSB], OUTPUT);
|
||||
digitalWrite(pin[GPIO_DSB], LOW);
|
||||
v &= 1;
|
||||
//noInterrupts();
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
delayMicroseconds(delay_low[v]);
|
||||
digitalWrite(ds18x20_pin, HIGH);
|
||||
//interrupts();
|
||||
delayMicroseconds(delay_high[v]);
|
||||
}
|
||||
|
||||
uint8_t OneWireReadBit()
|
||||
{
|
||||
//noInterrupts();
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
delayMicroseconds(3);
|
||||
pinMode(pin[GPIO_DSB], INPUT); // let pin float, pull up will raise
|
||||
pinMode(ds18x20_pin, INPUT);
|
||||
delayMicroseconds(10);
|
||||
r = digitalRead(pin[GPIO_DSB]);
|
||||
uint8_t r = digitalRead(ds18x20_pin);
|
||||
//interrupts();
|
||||
delayMicroseconds(53);
|
||||
return r;
|
||||
}
|
||||
|
||||
uint8_t Ds18b20Read(void)
|
||||
void OneWireWrite(uint8_t v)
|
||||
{
|
||||
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
||||
OneWireWriteBit((bit_mask & v) ? 1 : 0);
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t OneWireRead()
|
||||
{
|
||||
uint8_t bit_mask;
|
||||
uint8_t r = 0;
|
||||
|
||||
for (bit_mask = 1; bit_mask; bit_mask <<= 1) {
|
||||
if (Ds18b20ReadBit()) {
|
||||
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
||||
if (OneWireReadBit()) {
|
||||
r |= bit_mask;
|
||||
}
|
||||
}
|
||||
return r;
|
||||
}
|
||||
|
||||
void Ds18b20WriteBit(uint8_t v)
|
||||
boolean OneWireCrc8(uint8_t *addr)
|
||||
{
|
||||
if (v & 1) {
|
||||
digitalWrite(pin[GPIO_DSB], LOW);
|
||||
pinMode(pin[GPIO_DSB], OUTPUT);
|
||||
delayMicroseconds(10);
|
||||
digitalWrite(pin[GPIO_DSB], HIGH);
|
||||
delayMicroseconds(55);
|
||||
} else {
|
||||
digitalWrite(pin[GPIO_DSB], LOW);
|
||||
pinMode(pin[GPIO_DSB], OUTPUT);
|
||||
delayMicroseconds(65);
|
||||
digitalWrite(pin[GPIO_DSB], HIGH);
|
||||
delayMicroseconds(5);
|
||||
uint8_t crc = 0;
|
||||
uint8_t len = 8;
|
||||
|
||||
while (len--) {
|
||||
uint8_t inbyte = *addr++; // from 0 to 7
|
||||
for (uint8_t i = 8; i; i--) {
|
||||
uint8_t mix = (crc ^ inbyte) & 0x01;
|
||||
crc >>= 1;
|
||||
if (mix) {
|
||||
crc ^= 0x8C;
|
||||
}
|
||||
inbyte >>= 1;
|
||||
}
|
||||
}
|
||||
return (crc == *addr); // addr 8
|
||||
}
|
||||
|
||||
void Ds18b20Write(uint8_t byte_to_write)
|
||||
{
|
||||
uint8_t bit_mask;
|
||||
/********************************************************************************************/
|
||||
|
||||
for (bit_mask = 1; bit_mask; bit_mask <<= 1) {
|
||||
Ds18b20WriteBit((bit_mask & byte_to_write) ? 1 : 0);
|
||||
}
|
||||
void Ds18x20Init()
|
||||
{
|
||||
ds18x20_pin = pin[GPIO_DSB];
|
||||
}
|
||||
|
||||
uint8 Ds18b20Crc(uint8 inp, uint8 crc)
|
||||
void Ds18x20Convert()
|
||||
{
|
||||
inp ^= crc;
|
||||
crc = 0;
|
||||
if (inp & 0x1) crc ^= 0x5e;
|
||||
if (inp & 0x2) crc ^= 0xbc;
|
||||
if (inp & 0x4) crc ^= 0x61;
|
||||
if (inp & 0x8) crc ^= 0xc2;
|
||||
if (inp & 0x10) crc ^= 0x9d;
|
||||
if (inp & 0x20) crc ^= 0x23;
|
||||
if (inp & 0x40) crc ^= 0x46;
|
||||
if (inp & 0x80) crc ^= 0x8c;
|
||||
return crc;
|
||||
OneWireReset();
|
||||
OneWireWrite(W1_SKIP_ROM); // Address all Sensors on Bus
|
||||
OneWireWrite(W1_CONVERT_TEMP); // start conversion, no parasite power on at the end
|
||||
// delay(750); // 750ms should be enough for 12bit conv
|
||||
}
|
||||
|
||||
void Ds18b20ReadTempPrep()
|
||||
boolean Ds18b20Read(float &t)
|
||||
{
|
||||
Ds18b20Reset();
|
||||
Ds18b20Write(0xCC); // Skip ROM
|
||||
Ds18b20Write(0x44); // Start conversion
|
||||
}
|
||||
|
||||
boolean Ds18b20ReadTemperature(float &t)
|
||||
{
|
||||
int16_t DSTemp;
|
||||
byte msb, lsb, crc, sign = 1;
|
||||
uint8_t data[9];
|
||||
int8_t sign = 1;
|
||||
|
||||
if (!ds18b20_last_temperature) {
|
||||
t = NAN;
|
||||
} else {
|
||||
ds18b20_last_result++;
|
||||
if (ds18b20_last_result > 8) { // Reset after 8 misses
|
||||
if (ds18b20_last_result > 4) { // Reset after 4 misses
|
||||
ds18b20_last_temperature = NAN;
|
||||
}
|
||||
t = ds18b20_last_temperature;
|
||||
}
|
||||
|
||||
if (!Ds18b20ReadBit()) { //check measurement end
|
||||
/*
|
||||
if (!OneWireReadBit()) { //check measurement end
|
||||
AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_BUSY));
|
||||
return !isnan(t);
|
||||
}
|
||||
/*
|
||||
Ds18b20Reset();
|
||||
Ds18b20Write(0xCC); // Skip ROM
|
||||
Ds18b20Write(0x44); // Start conversion
|
||||
delay(800);
|
||||
*/
|
||||
Ds18b20Reset();
|
||||
Ds18b20Write(0xCC); // Skip ROM
|
||||
Ds18b20Write(0xBE); // Read scratchpad
|
||||
lsb = Ds18b20Read();
|
||||
msb = Ds18b20Read();
|
||||
crc = Ds18b20Crc(lsb, crc);
|
||||
crc = Ds18b20Crc(msb, crc);
|
||||
crc = Ds18b20Crc(Ds18b20Read(), crc);
|
||||
crc = Ds18b20Crc(Ds18b20Read(), crc);
|
||||
crc = Ds18b20Crc(Ds18b20Read(), crc);
|
||||
crc = Ds18b20Crc(Ds18b20Read(), crc);
|
||||
crc = Ds18b20Crc(Ds18b20Read(), crc);
|
||||
crc = Ds18b20Crc(Ds18b20Read(), crc);
|
||||
crc = Ds18b20Crc(Ds18b20Read(), crc);
|
||||
Ds18b20Reset();
|
||||
if (crc) { //check crc
|
||||
AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_CRC_ERROR));
|
||||
} else {
|
||||
DSTemp = (msb << 8) + lsb;
|
||||
if (DSTemp > 2047) {
|
||||
DSTemp = (~DSTemp) +1;
|
||||
for (uint8_t retry = 0; retry < 3; retry++) {
|
||||
OneWireReset();
|
||||
OneWireWrite(W1_SKIP_ROM);
|
||||
OneWireWrite(W1_READ_SCRATCHPAD);
|
||||
for (uint8_t i = 0; i < 9; i++) {
|
||||
data[i] = OneWireRead();
|
||||
}
|
||||
if (OneWireCrc8(data)) {
|
||||
uint16_t temp12 = (data[1] << 8) + data[0];
|
||||
if (temp12 > 2047) {
|
||||
temp12 = (~temp12) +1;
|
||||
sign = -1;
|
||||
}
|
||||
t = ConvertTemp((float)sign * DSTemp * 0.0625);
|
||||
t = ConvertTemp(sign * temp12 * 0.0625);
|
||||
ds18b20_last_result = 0;
|
||||
}
|
||||
if (!isnan(t)) {
|
||||
ds18b20_last_temperature = t;
|
||||
return true;
|
||||
}
|
||||
}
|
||||
AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_CRC_ERROR));
|
||||
return !isnan(t);
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Ds18b20Show(boolean json)
|
||||
{
|
||||
float t;
|
||||
|
||||
if (Ds18b20ReadTemperature(t)) { // Check if read failed
|
||||
if (Ds18b20Read(t)) { // Check if read failed
|
||||
char temperature[10];
|
||||
|
||||
dtostrfi(t, Settings.flag2.temperature_resolution, temperature);
|
||||
|
|
@ -203,11 +205,6 @@ void Ds18b20Show(boolean json)
|
|||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
#ifdef USE_WEBSERVER
|
||||
if (!json) {
|
||||
Ds18b20ReadTempPrep();
|
||||
}
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
|
|
@ -222,10 +219,11 @@ boolean Xsns05(byte function)
|
|||
|
||||
if (pin[GPIO_DSB] < 99) {
|
||||
switch (function) {
|
||||
// case FUNC_XSNS_INIT:
|
||||
// break;
|
||||
case FUNC_XSNS_INIT:
|
||||
Ds18x20Init();
|
||||
break;
|
||||
case FUNC_XSNS_PREP:
|
||||
Ds18b20ReadTempPrep();
|
||||
Ds18x20Convert(); // Start conversion, takes up to one second
|
||||
break;
|
||||
case FUNC_XSNS_JSON_APPEND:
|
||||
Ds18b20Show(1);
|
||||
|
|
@ -233,6 +231,7 @@ boolean Xsns05(byte function)
|
|||
#ifdef USE_WEBSERVER
|
||||
case FUNC_XSNS_WEB:
|
||||
Ds18b20Show(0);
|
||||
Ds18x20Convert(); // Start conversion, takes up to one second
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
xsns_05_ds18x20.ino - DS18x20 temperature sensor support for Sonoff-Tasmota
|
||||
|
||||
Copyright (C) 2017 Heiko Krupp and Theo Arends
|
||||
Copyright (C) 2017 Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -19,7 +19,7 @@
|
|||
|
||||
#ifdef USE_DS18x20
|
||||
/*********************************************************************************************\
|
||||
* DS18B20 - Temperature
|
||||
* DS18B20 - Temperature - Multiple sensors
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define DS18S20_CHIPID 0x10 // +/-0.5C 9-bit
|
||||
|
|
@ -37,37 +37,236 @@
|
|||
|
||||
const char kDs18x20Types[] PROGMEM = "DS18x20|DS18S20|DS1822|DS18B20|MAX31850";
|
||||
|
||||
#include <OneWire.h>
|
||||
|
||||
OneWire *ds = NULL;
|
||||
|
||||
uint8_t ds18x20_chipids[] = { 0, DS18S20_CHIPID, DS1822_CHIPID, DS18B20_CHIPID, MAX31850_CHIPID };
|
||||
uint8_t ds18x20_address[DS18X20_MAX_SENSORS][8];
|
||||
uint8_t ds18x20_index[DS18X20_MAX_SENSORS] = { 0 };
|
||||
uint8_t ds18x20_sensors = 0;
|
||||
uint8_t ds18x20_pin = 0;
|
||||
char ds18x20_types[9];
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Embedded tuned OneWire library
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define W1_MATCH_ROM 0x55
|
||||
#define W1_SEARCH_ROM 0xF0
|
||||
|
||||
uint8_t onewire_last_discrepancy = 0;
|
||||
uint8_t onewire_last_family_discrepancy = 0;
|
||||
bool onewire_last_device_flag = false;
|
||||
unsigned char onewire_rom_id[8] = { 0 };
|
||||
|
||||
uint8_t OneWireReset()
|
||||
{
|
||||
uint8_t retries = 125;
|
||||
|
||||
//noInterrupts();
|
||||
pinMode(ds18x20_pin, INPUT);
|
||||
do {
|
||||
if (--retries == 0) {
|
||||
return 0;
|
||||
}
|
||||
delayMicroseconds(2);
|
||||
} while (!digitalRead(ds18x20_pin));
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
delayMicroseconds(480);
|
||||
pinMode(ds18x20_pin, INPUT);
|
||||
delayMicroseconds(70);
|
||||
uint8_t r = !digitalRead(ds18x20_pin);
|
||||
//interrupts();
|
||||
delayMicroseconds(410);
|
||||
return r;
|
||||
}
|
||||
|
||||
void OneWireWriteBit(uint8_t v)
|
||||
{
|
||||
static const uint8_t delay_low[2] = { 65, 10 };
|
||||
static const uint8_t delay_high[2] = { 5, 55 };
|
||||
|
||||
v &= 1;
|
||||
//noInterrupts();
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
delayMicroseconds(delay_low[v]);
|
||||
digitalWrite(ds18x20_pin, HIGH);
|
||||
//interrupts();
|
||||
delayMicroseconds(delay_high[v]);
|
||||
}
|
||||
|
||||
uint8_t OneWireReadBit()
|
||||
{
|
||||
//noInterrupts();
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
delayMicroseconds(3);
|
||||
pinMode(ds18x20_pin, INPUT);
|
||||
delayMicroseconds(10);
|
||||
uint8_t r = digitalRead(ds18x20_pin);
|
||||
//interrupts();
|
||||
delayMicroseconds(53);
|
||||
return r;
|
||||
}
|
||||
|
||||
void OneWireWrite(uint8_t v)
|
||||
{
|
||||
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
||||
OneWireWriteBit((bit_mask & v) ? 1 : 0);
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t OneWireRead()
|
||||
{
|
||||
uint8_t r = 0;
|
||||
|
||||
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
||||
if (OneWireReadBit()) {
|
||||
r |= bit_mask;
|
||||
}
|
||||
}
|
||||
return r;
|
||||
}
|
||||
|
||||
void OneWireSelect(const uint8_t rom[8])
|
||||
{
|
||||
OneWireWrite(W1_MATCH_ROM);
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
OneWireWrite(rom[i]);
|
||||
}
|
||||
}
|
||||
|
||||
void OneWireResetSearch()
|
||||
{
|
||||
onewire_last_discrepancy = 0;
|
||||
onewire_last_device_flag = false;
|
||||
onewire_last_family_discrepancy = 0;
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
onewire_rom_id[i] = 0;
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t OneWireSearch(uint8_t *newAddr)
|
||||
{
|
||||
uint8_t id_bit_number = 1;
|
||||
uint8_t last_zero = 0;
|
||||
uint8_t rom_byte_number = 0;
|
||||
uint8_t search_result = 0;
|
||||
uint8_t id_bit;
|
||||
uint8_t cmp_id_bit;
|
||||
unsigned char rom_byte_mask = 1;
|
||||
unsigned char search_direction;
|
||||
|
||||
if (!onewire_last_device_flag) {
|
||||
if (!OneWireReset()) {
|
||||
onewire_last_discrepancy = 0;
|
||||
onewire_last_device_flag = false;
|
||||
onewire_last_family_discrepancy = 0;
|
||||
return false;
|
||||
}
|
||||
OneWireWrite(W1_SEARCH_ROM);
|
||||
do {
|
||||
id_bit = OneWireReadBit();
|
||||
cmp_id_bit = OneWireReadBit();
|
||||
|
||||
if ((id_bit == 1) && (cmp_id_bit == 1)) {
|
||||
break;
|
||||
} else {
|
||||
if (id_bit != cmp_id_bit) {
|
||||
search_direction = id_bit;
|
||||
} else {
|
||||
if (id_bit_number < onewire_last_discrepancy) {
|
||||
search_direction = ((onewire_rom_id[rom_byte_number] & rom_byte_mask) > 0);
|
||||
} else {
|
||||
search_direction = (id_bit_number == onewire_last_discrepancy);
|
||||
}
|
||||
if (search_direction == 0) {
|
||||
last_zero = id_bit_number;
|
||||
if (last_zero < 9) {
|
||||
onewire_last_family_discrepancy = last_zero;
|
||||
}
|
||||
}
|
||||
}
|
||||
if (search_direction == 1) {
|
||||
onewire_rom_id[rom_byte_number] |= rom_byte_mask;
|
||||
} else {
|
||||
onewire_rom_id[rom_byte_number] &= ~rom_byte_mask;
|
||||
}
|
||||
OneWireWriteBit(search_direction);
|
||||
id_bit_number++;
|
||||
rom_byte_mask <<= 1;
|
||||
if (rom_byte_mask == 0) {
|
||||
rom_byte_number++;
|
||||
rom_byte_mask = 1;
|
||||
}
|
||||
}
|
||||
} while (rom_byte_number < 8);
|
||||
if (!(id_bit_number < 65)) {
|
||||
onewire_last_discrepancy = last_zero;
|
||||
if (onewire_last_discrepancy == 0) {
|
||||
onewire_last_device_flag = true;
|
||||
}
|
||||
search_result = true;
|
||||
}
|
||||
}
|
||||
if (!search_result || !onewire_rom_id[0]) {
|
||||
onewire_last_discrepancy = 0;
|
||||
onewire_last_device_flag = false;
|
||||
onewire_last_family_discrepancy = 0;
|
||||
search_result = false;
|
||||
}
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
newAddr[i] = onewire_rom_id[i];
|
||||
}
|
||||
return search_result;
|
||||
}
|
||||
|
||||
boolean OneWireCrc8(uint8_t *addr)
|
||||
{
|
||||
uint8_t crc = 0;
|
||||
uint8_t len = 8;
|
||||
|
||||
while (len--) {
|
||||
uint8_t inbyte = *addr++; // from 0 to 7
|
||||
for (uint8_t i = 8; i; i--) {
|
||||
uint8_t mix = (crc ^ inbyte) & 0x01;
|
||||
crc >>= 1;
|
||||
if (mix) {
|
||||
crc ^= 0x8C;
|
||||
}
|
||||
inbyte >>= 1;
|
||||
}
|
||||
}
|
||||
return (crc == *addr); // addr 8
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Ds18x20Init()
|
||||
{
|
||||
ds = new OneWire(pin[GPIO_DSB]);
|
||||
ds->reset_search();
|
||||
uint64_t ids[DS18X20_MAX_SENSORS];
|
||||
|
||||
ds18x20_pin = pin[GPIO_DSB];
|
||||
OneWireResetSearch();
|
||||
for (ds18x20_sensors = 0; ds18x20_sensors < DS18X20_MAX_SENSORS; ds18x20_sensors) {
|
||||
if (!ds->search(ds18x20_address[ds18x20_sensors])) {
|
||||
ds->reset_search();
|
||||
if (!OneWireSearch(ds18x20_address[ds18x20_sensors])) {
|
||||
break;
|
||||
}
|
||||
if ((OneWire::crc8(ds18x20_address[ds18x20_sensors], 7) == ds18x20_address[ds18x20_sensors][7]) &&
|
||||
if (OneWireCrc8(ds18x20_address[ds18x20_sensors]) &&
|
||||
((ds18x20_address[ds18x20_sensors][0] == DS18S20_CHIPID) ||
|
||||
(ds18x20_address[ds18x20_sensors][0] == DS1822_CHIPID) ||
|
||||
(ds18x20_address[ds18x20_sensors][0] == DS18B20_CHIPID) ||
|
||||
(ds18x20_address[ds18x20_sensors][0] == MAX31850_CHIPID))) {
|
||||
ds18x20_index[ds18x20_sensors] = ds18x20_sensors;
|
||||
ids[ds18x20_sensors] = ds18x20_address[ds18x20_sensors][0]; // Chip id
|
||||
for (uint8_t j = 6; j > 0; j--) {
|
||||
ids[ds18x20_sensors] = ids[ds18x20_sensors] << 8 | ds18x20_address[ds18x20_sensors][j];
|
||||
}
|
||||
ds18x20_sensors++;
|
||||
}
|
||||
}
|
||||
for (byte i = 0; i < ds18x20_sensors; i++) {
|
||||
for (byte j = i + 1; j < ds18x20_sensors; j++) {
|
||||
if (uint32_t(ds18x20_address[ds18x20_index[i]]) > uint32_t(ds18x20_address[ds18x20_index[j]])) {
|
||||
for (uint8_t i = 0; i < ds18x20_sensors; i++) {
|
||||
for (uint8_t j = i + 1; j < ds18x20_sensors; j++) {
|
||||
if (ids[ds18x20_index[i]] > ids[ds18x20_index[j]]) { // Sort ascending
|
||||
std::swap(ds18x20_index[i], ds18x20_index[j]);
|
||||
}
|
||||
}
|
||||
|
|
@ -78,29 +277,28 @@ void Ds18x20Init()
|
|||
|
||||
void Ds18x20Convert()
|
||||
{
|
||||
ds->reset();
|
||||
ds->write(W1_SKIP_ROM); // Address all Sensors on Bus
|
||||
ds->write(W1_CONVERT_TEMP); // start conversion, no parasite power on at the end
|
||||
OneWireReset();
|
||||
OneWireWrite(W1_SKIP_ROM); // Address all Sensors on Bus
|
||||
OneWireWrite(W1_CONVERT_TEMP); // start conversion, no parasite power on at the end
|
||||
// delay(750); // 750ms should be enough for 12bit conv
|
||||
}
|
||||
|
||||
boolean Ds18x20Read(uint8_t sensor, float &t)
|
||||
{
|
||||
byte data[12];
|
||||
uint8_t data[9];
|
||||
int8_t sign = 1;
|
||||
float temp9 = 0.0;
|
||||
uint8_t present = 0;
|
||||
|
||||
t = NAN;
|
||||
|
||||
ds->reset();
|
||||
ds->select(ds18x20_address[ds18x20_index[sensor]]);
|
||||
ds->write(W1_READ_SCRATCHPAD); // Read Scratchpad
|
||||
|
||||
for (byte i = 0; i < 9; i++) {
|
||||
data[i] = ds->read();
|
||||
for (uint8_t retry = 0; retry < 3; retry++) {
|
||||
OneWireReset();
|
||||
OneWireSelect(ds18x20_address[ds18x20_index[sensor]]);
|
||||
OneWireWrite(W1_READ_SCRATCHPAD);
|
||||
for (uint8_t i = 0; i < 9; i++) {
|
||||
data[i] = OneWireRead();
|
||||
}
|
||||
if (OneWire::crc8(data, 8) == data[8]) {
|
||||
if (OneWireCrc8(data)) {
|
||||
switch(ds18x20_address[ds18x20_index[sensor]][0]) {
|
||||
case DS18S20_CHIPID:
|
||||
if (data[1] > 0x80) {
|
||||
|
|
@ -118,14 +316,14 @@ boolean Ds18x20Read(uint8_t sensor, float &t)
|
|||
case DS18B20_CHIPID:
|
||||
if (data[4] != 0x7F) {
|
||||
data[4] = 0x7F; // Set resolution to 12-bit
|
||||
ds->reset();
|
||||
ds->select(ds18x20_address[ds18x20_index[sensor]]);
|
||||
ds->write(W1_WRITE_SCRATCHPAD); // Write Scratchpad
|
||||
ds->write(data[2]); // Th Register
|
||||
ds->write(data[3]); // Tl Register
|
||||
ds->write(data[4]); // Configuration Register
|
||||
ds->select(ds18x20_address[ds18x20_index[sensor]]);
|
||||
ds->write(W1_WRITE_EEPROM); // Save scratchpad to EEPROM
|
||||
OneWireReset();
|
||||
OneWireSelect(ds18x20_address[ds18x20_index[sensor]]);
|
||||
OneWireWrite(W1_WRITE_SCRATCHPAD);
|
||||
OneWireWrite(data[2]); // Th Register
|
||||
OneWireWrite(data[3]); // Tl Register
|
||||
OneWireWrite(data[4]); // Configuration Register
|
||||
OneWireSelect(ds18x20_address[ds18x20_index[sensor]]);
|
||||
OneWireWrite(W1_WRITE_EEPROM); // Save scratchpad to EEPROM
|
||||
}
|
||||
case MAX31850_CHIPID:
|
||||
uint16_t temp12 = (data[1] << 8) + data[0];
|
||||
|
|
@ -136,23 +334,23 @@ boolean Ds18x20Read(uint8_t sensor, float &t)
|
|||
t = ConvertTemp(sign * temp12 * 0.0625);
|
||||
break;
|
||||
}
|
||||
} else {
|
||||
}
|
||||
if (!isnan(t)) {
|
||||
return true;
|
||||
}
|
||||
}
|
||||
AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_CRC_ERROR));
|
||||
return false;
|
||||
}
|
||||
return (!isnan(t));
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Ds18x20Show(boolean json)
|
||||
{
|
||||
char temperature[10];
|
||||
char stemp[12];
|
||||
char separator[2] = { '\0' };
|
||||
float t;
|
||||
bool domoticz_flag = true;
|
||||
|
||||
for (byte i = 0; i < ds18x20_sensors; i++) {
|
||||
for (uint8_t i = 0; i < ds18x20_sensors; i++) {
|
||||
if (Ds18x20Read(i, t)) { // Check if read failed
|
||||
dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
|
||||
|
||||
|
|
@ -164,23 +362,17 @@ void Ds18x20Show(boolean json)
|
|||
index--;
|
||||
}
|
||||
GetTextIndexed(ds18x20_types, sizeof(ds18x20_types), index, kDs18x20Types);
|
||||
|
||||
snprintf_P(stemp, sizeof(stemp), PSTR("%s-%d"), ds18x20_types, i +1);
|
||||
if (json) {
|
||||
if (1 == ds18x20_sensors) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_TEMPERATURE "\":%s}"), mqtt_data, ds18x20_types, temperature);
|
||||
} else {
|
||||
char address[17];
|
||||
// for (byte j = 0; j < 8; j++) {
|
||||
// sprintf(address+2*j, "%02X", ds18x20_address[ds18x20_index[i]][j]);
|
||||
// }
|
||||
for (byte j = 0; j < 6; j++) {
|
||||
sprintf(address+2*j, "%02X", ds18x20_address[ds18x20_index[i]][6-j]); // Skip sensor type and crc
|
||||
}
|
||||
if (!separator[0]) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"DS18x20\":{"), mqtt_data);
|
||||
}
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s%s\"DS%d\":{\"" D_TYPE "\":\"%s\",\"" D_ADDRESS "\":\"%s\",\"" D_TEMPERATURE "\":%s}"),
|
||||
mqtt_data, separator, i +1, ds18x20_types, address, temperature);
|
||||
separator[0] = ',';
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_ID "\":\"%s\",\"" D_TEMPERATURE "\":%s}"), mqtt_data, stemp, address, temperature);
|
||||
}
|
||||
#ifdef USE_DOMOTICZ
|
||||
if (domoticz_flag) {
|
||||
|
|
@ -190,17 +382,11 @@ void Ds18x20Show(boolean json)
|
|||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
snprintf_P(stemp, sizeof(stemp), PSTR("%s-%d"), ds18x20_types, i +1);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, (1 == ds18x20_sensors) ? ds18x20_types : stemp, temperature, TempUnit());
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
}
|
||||
if (json) {
|
||||
if (separator[0]) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
|
|
@ -219,7 +405,7 @@ boolean Xsns05(byte function)
|
|||
Ds18x20Init();
|
||||
break;
|
||||
case FUNC_XSNS_PREP:
|
||||
Ds18x20Convert(); // Check for changes in sensor number and start conversion, takes up to one second
|
||||
Ds18x20Convert(); // Start conversion, takes up to one second
|
||||
break;
|
||||
case FUNC_XSNS_JSON_APPEND:
|
||||
Ds18x20Show(1);
|
||||
|
|
@ -227,7 +413,7 @@ boolean Xsns05(byte function)
|
|||
#ifdef USE_WEBSERVER
|
||||
case FUNC_XSNS_WEB:
|
||||
Ds18x20Show(0);
|
||||
Ds18x20Convert(); // Check for changes in sensor number and start conversion, takes up to one second
|
||||
Ds18x20Convert(); // Start conversion, takes up to one second
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,242 @@
|
|||
/*
|
||||
xsns_05_ds18x20_legacy.ino - DS18x20 temperature sensor support for Sonoff-Tasmota
|
||||
|
||||
Copyright (C) 2017 Heiko Krupp and Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifdef USE_DS18x20_LEGACY
|
||||
/*********************************************************************************************\
|
||||
* DS18B20 - Temperature
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define DS18S20_CHIPID 0x10
|
||||
#define DS18B20_CHIPID 0x28
|
||||
#define MAX31850_CHIPID 0x3B
|
||||
|
||||
#define W1_SKIP_ROM 0xCC
|
||||
#define W1_CONVERT_TEMP 0x44
|
||||
#define W1_READ_SCRATCHPAD 0xBE
|
||||
|
||||
#define DS18X20_MAX_SENSORS 8
|
||||
|
||||
#include <OneWire.h>
|
||||
|
||||
OneWire *ds = NULL;
|
||||
|
||||
uint8_t ds18x20_address[DS18X20_MAX_SENSORS][8];
|
||||
uint8_t ds18x20_index[DS18X20_MAX_SENSORS];
|
||||
uint8_t ds18x20_sensors = 0;
|
||||
char ds18x20_types[9];
|
||||
|
||||
void Ds18x20Init()
|
||||
{
|
||||
ds = new OneWire(pin[GPIO_DSB]);
|
||||
}
|
||||
|
||||
void Ds18x20Search()
|
||||
{
|
||||
uint8_t num_sensors=0;
|
||||
uint8_t sensor = 0;
|
||||
|
||||
ds->reset_search();
|
||||
for (num_sensors = 0; num_sensors < DS18X20_MAX_SENSORS; num_sensors) {
|
||||
if (!ds->search(ds18x20_address[num_sensors])) {
|
||||
ds->reset_search();
|
||||
break;
|
||||
}
|
||||
// If CRC Ok and Type DS18S20, DS18B20 or MAX31850
|
||||
if ((OneWire::crc8(ds18x20_address[num_sensors], 7) == ds18x20_address[num_sensors][7]) &&
|
||||
((ds18x20_address[num_sensors][0]==DS18S20_CHIPID) || (ds18x20_address[num_sensors][0]==DS18B20_CHIPID) || (ds18x20_address[num_sensors][0]==MAX31850_CHIPID))) {
|
||||
num_sensors++;
|
||||
}
|
||||
}
|
||||
for (byte i = 0; i < num_sensors; i++) {
|
||||
ds18x20_index[i] = i;
|
||||
}
|
||||
for (byte i = 0; i < num_sensors; i++) {
|
||||
for (byte j = i + 1; j < num_sensors; j++) {
|
||||
if (uint32_t(ds18x20_address[ds18x20_index[i]]) > uint32_t(ds18x20_address[ds18x20_index[j]])) {
|
||||
std::swap(ds18x20_index[i], ds18x20_index[j]);
|
||||
}
|
||||
}
|
||||
}
|
||||
ds18x20_sensors = num_sensors;
|
||||
}
|
||||
|
||||
uint8_t Ds18x20Sensors()
|
||||
{
|
||||
return ds18x20_sensors;
|
||||
}
|
||||
|
||||
String Ds18x20Addresses(uint8_t sensor)
|
||||
{
|
||||
char address[20];
|
||||
|
||||
for (byte i = 0; i < 8; i++) {
|
||||
sprintf(address+2*i, "%02X", ds18x20_address[ds18x20_index[sensor]][i]);
|
||||
}
|
||||
return String(address);
|
||||
}
|
||||
|
||||
void Ds18x20Convert()
|
||||
{
|
||||
ds->reset();
|
||||
ds->write(W1_SKIP_ROM); // Address all Sensors on Bus
|
||||
ds->write(W1_CONVERT_TEMP); // start conversion, no parasite power on at the end
|
||||
// delay(750); // 750ms should be enough for 12bit conv
|
||||
}
|
||||
|
||||
boolean Ds18x20Read(uint8_t sensor, float &t)
|
||||
{
|
||||
byte data[12];
|
||||
int8_t sign = 1;
|
||||
float temp9 = 0.0;
|
||||
uint8_t present = 0;
|
||||
|
||||
t = NAN;
|
||||
|
||||
ds->reset();
|
||||
ds->select(ds18x20_address[ds18x20_index[sensor]]);
|
||||
ds->write(W1_READ_SCRATCHPAD); // Read Scratchpad
|
||||
|
||||
for (byte i = 0; i < 9; i++) {
|
||||
data[i] = ds->read();
|
||||
}
|
||||
if (OneWire::crc8(data, 8) == data[8]) {
|
||||
switch(ds18x20_address[ds18x20_index[sensor]][0]) {
|
||||
case DS18S20_CHIPID: // DS18S20
|
||||
if (data[1] > 0x80) {
|
||||
data[0] = (~data[0]) +1;
|
||||
sign = -1; // App-Note fix possible sign error
|
||||
}
|
||||
if (data[0] & 1) {
|
||||
temp9 = ((data[0] >> 1) + 0.5) * sign;
|
||||
} else {
|
||||
temp9 = (data[0] >> 1) * sign;
|
||||
}
|
||||
t = ConvertTemp((temp9 - 0.25) + ((16.0 - data[6]) / 16.0));
|
||||
break;
|
||||
case DS18B20_CHIPID: // DS18B20
|
||||
case MAX31850_CHIPID: // MAX31850
|
||||
uint16_t temp12 = (data[1] << 8) + data[0];
|
||||
if (temp12 > 2047) {
|
||||
temp12 = (~temp12) +1;
|
||||
sign = -1;
|
||||
}
|
||||
t = ConvertTemp(sign * temp12 * 0.0625);
|
||||
break;
|
||||
}
|
||||
}
|
||||
return (!isnan(t));
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Ds18x20Type(uint8_t sensor)
|
||||
{
|
||||
strcpy_P(ds18x20_types, PSTR("DS18x20"));
|
||||
switch(ds18x20_address[ds18x20_index[sensor]][0]) {
|
||||
case DS18S20_CHIPID:
|
||||
strcpy_P(ds18x20_types, PSTR("DS18S20"));
|
||||
break;
|
||||
case DS18B20_CHIPID:
|
||||
strcpy_P(ds18x20_types, PSTR("DS18B20"));
|
||||
break;
|
||||
case MAX31850_CHIPID:
|
||||
strcpy_P(ds18x20_types, PSTR("MAX31850"));
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void Ds18x20Show(boolean json)
|
||||
{
|
||||
char temperature[10];
|
||||
char stemp[10];
|
||||
float t;
|
||||
|
||||
byte dsxflg = 0;
|
||||
for (byte i = 0; i < Ds18x20Sensors(); i++) {
|
||||
if (Ds18x20Read(i, t)) { // Check if read failed
|
||||
Ds18x20Type(i);
|
||||
dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
|
||||
|
||||
if (json) {
|
||||
if (!dsxflg) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"DS18x20\":{"), mqtt_data);
|
||||
stemp[0] = '\0';
|
||||
}
|
||||
dsxflg++;
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s%s\"DS%d\":{\"" D_TYPE "\":\"%s\",\"" D_ADDRESS "\":\"%s\",\"" D_TEMPERATURE "\":%s}"),
|
||||
mqtt_data, stemp, i +1, ds18x20_types, Ds18x20Addresses(i).c_str(), temperature);
|
||||
strcpy(stemp, ",");
|
||||
#ifdef USE_DOMOTICZ
|
||||
if (1 == dsxflg) {
|
||||
DomoticzSensor(DZ_TEMP, temperature);
|
||||
}
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
snprintf_P(stemp, sizeof(stemp), PSTR("%s-%d"), ds18x20_types, i +1);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, stemp, temperature, TempUnit());
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
}
|
||||
if (json) {
|
||||
if (dsxflg) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
|
||||
}
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
Ds18x20Search(); // Check for changes in sensors number
|
||||
Ds18x20Convert(); // Start Conversion, takes up to one second
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Interface
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XSNS_05
|
||||
|
||||
boolean Xsns05(byte function)
|
||||
{
|
||||
boolean result = false;
|
||||
|
||||
if (pin[GPIO_DSB] < 99) {
|
||||
switch (function) {
|
||||
case FUNC_XSNS_INIT:
|
||||
Ds18x20Init();
|
||||
break;
|
||||
case FUNC_XSNS_PREP:
|
||||
Ds18x20Search(); // Check for changes in sensors number
|
||||
Ds18x20Convert(); // Start Conversion, takes up to one second
|
||||
break;
|
||||
case FUNC_XSNS_JSON_APPEND:
|
||||
Ds18x20Show(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_XSNS_WEB:
|
||||
Ds18x20Show(0);
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
#endif // USE_DS18x20_LEGACY
|
||||
|
|
@ -157,13 +157,15 @@ int16_t Ads1115GetConversion(uint8_t channel)
|
|||
|
||||
void Ads1115Detect()
|
||||
{
|
||||
uint16_t buffer;
|
||||
|
||||
if (ads1115_type) {
|
||||
return;
|
||||
}
|
||||
|
||||
for (byte i = 0; i < sizeof(ads1115_addresses); i++) {
|
||||
ads1115_address = ads1115_addresses[i];
|
||||
if (I2cRead16(ads1115_address, ADS1115_REG_POINTER_CONVERT)) {
|
||||
if (I2cValidRead16(&buffer, ads1115_address, ADS1115_REG_POINTER_CONVERT)) {
|
||||
Ads1115StartComparator(i, ADS1115_REG_CONFIG_MODE_CONTIN);
|
||||
ads1115_type = 1;
|
||||
break;
|
||||
|
|
|
|||
Loading…
Reference in New Issue