mirror of https://github.com/arendst/Tasmota.git
Add support for ESP32 ``Module 5`` Wireless Tag Eth01
Add support for ESP32 ``Module 5`` Wireless Tag Eth01 (#9496)
This commit is contained in:
Theo Arends
parent
64d152a451
commit
12e262d337
|
|
@ -8,6 +8,7 @@ All notable changes to this project will be documented in this file.
|
|||
- Function ``AddLog`` to provide logging for up to 128 (LOGSZ) characters to save stack space
|
||||
- Commands ``ChannelRemap``, ``MultiPWM``, ``AlexaCTRange``, ``PowerOnFade``, ``PWMCT``, ``WhiteBlend``, ``VirtualCT`` as synonyms for ``SetOption37, 68, 82, 91, 92, 105 and 106`` respectively
|
||||
- Commands ``ZbNameKey``, ``ZbDeviceTopic``, ``ZbNoPrefix``, ``ZbEndpointSuffix``, ``ZbNoAutoBind``, ``ZbNameTopic`` as synonyms for ``SetOption83, 89, 100, 101, 110 and 112`` respectively
|
||||
- Support for ESP32 ``Module 5`` Wireless Tag Eth01 (#9496)
|
||||
|
||||
### Changed
|
||||
- Maximum chars in ``AddLog_P`` logging restored from 128 to 700 (MAX_LOGSZ) to solve broken error messages
|
||||
|
|
@ -25,7 +26,7 @@ All notable changes to this project will be documented in this file.
|
|||
- Compile time option ``USE_MQTT_TLS_DROP_OLD_FINGERPRINT`` to drop old (less secure) TLS fingerprint
|
||||
- Command ``SetOption40 0..250`` to disable button functionality if activated for over 0.1 second re-introduced
|
||||
- Support for SM2135 current selection using GPIO ``SM2135 DAT`` index (#10634)
|
||||
- Basic support for ESP32 M5stack core2 16MB binary tasmota32-core2.bin (#10635)
|
||||
- Support for ESP32 ``Module 7`` M5stack core2 16MB binary tasmota32-core2.bin (#10635)
|
||||
- Support for Sugar Valley NeoPool Controller by Norbert Richter (#10637)
|
||||
- Rule trigger string comparisons for EndsWith ``$>``, StartsWith ``$<`` and Contains ``$|`` (#10538)
|
||||
- Support for TOF10120 time of flight sensor by Cyril Pawelko (#10190)
|
||||
|
|
@ -42,7 +43,7 @@ All notable changes to this project will be documented in this file.
|
|||
|
||||
## [9.2.0.2] 20210105
|
||||
### Added
|
||||
- Basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630)
|
||||
- Support for ESP32 ``Module 3`` Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630)
|
||||
- Command ``CTRange`` to specify the visible CT range the bulb is capable of (#10311)
|
||||
- Command ``VirtualCT`` to simulate or fine tune CT bulbs with 3,4,5 channels (#10311)
|
||||
- Command ``SetOption118 1`` to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default (#10353)
|
||||
|
|
|
|||
|
|
@ -87,8 +87,9 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
|
|||
- Support for Sugar Valley NeoPool Controller by Norbert Richter [#10637](https://github.com/arendst/Tasmota/issues/10637)
|
||||
- Support rotary encoder on Shelly Dimmer [#10407](https://github.com/arendst/Tasmota/issues/10407#issuecomment-756240920)
|
||||
- Support character `#` to be replaced by `space`-character in command ``Publish`` topic [#10258](https://github.com/arendst/Tasmota/issues/10258)
|
||||
- Basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin [#8630](https://github.com/arendst/Tasmota/issues/8630)
|
||||
- Basic support for ESP32 M5stack core2 16MB binary tasmota32-core2.bin [#10635](https://github.com/arendst/Tasmota/issues/10635)
|
||||
- Support for ESP32 ``Module 3`` Odroid Go 16MB binary tasmota32-odroidgo.bin [#8630](https://github.com/arendst/Tasmota/issues/8630)
|
||||
- Support for ESP32 ``Module 5`` Wireless Tag Eth01 [#9496](https://github.com/arendst/Tasmota/issues/9496)
|
||||
- Support for ESP32 ``Module 7`` M5stack core2 16MB binary tasmota32-core2.bin [#10635](https://github.com/arendst/Tasmota/issues/10635)
|
||||
- Rule trigger string comparisons for EndsWith ``$>``, StartsWith ``$<`` and Contains ``$|`` [#10538](https://github.com/arendst/Tasmota/issues/10538)
|
||||
- SPI display driver SSD1331 Color oled by Jeroen Vermeulen [#10376](https://github.com/arendst/Tasmota/issues/10376)
|
||||
- Compile time option ``USE_MQTT_TLS_DROP_OLD_FINGERPRINT`` to drop old (less secure) TLS fingerprint
|
||||
|
|
|
|||
|
|
@ -849,6 +849,10 @@
|
|||
#ifdef ESP32
|
||||
|
||||
//#define USE_ETHERNET // Add support for ethernet (Currently fixed for Olimex ESP32-PoE)
|
||||
// #define USE_WT32_ETH01 // Add support for Wireless-Tag WT32-ETH01
|
||||
// #define ETH_TYPE 0 // [EthType] 0 = ETH_PHY_LAN8720, 1 = ETH_PHY_TLK110, 2 = ETH_PHY_IP101
|
||||
// #define ETH_ADDR 1 // [EthAddress] 0 = PHY0 .. 31 = PHY31
|
||||
// #define ETH_CLKMODE 0 // [EthClockMode] 0 = ETH_CLOCK_GPIO0_IN, 1 = ETH_CLOCK_GPIO0_OUT, 2 = ETH_CLOCK_GPIO16_OUT, 3 = ETH_CLOCK_GPIO17_OUT
|
||||
// Olimex ESP32-PoE
|
||||
#define ETH_TYPE 0 // [EthType] 0 = ETH_PHY_LAN8720, 1 = ETH_PHY_TLK110, 2 = ETH_PHY_IP101
|
||||
#define ETH_ADDR 0 // [EthAddress] 0 = PHY0 .. 31 = PHY31
|
||||
|
|
@ -856,10 +860,6 @@
|
|||
// wESP32-PoE
|
||||
// #define ETH_TYPE 0 // [EthType] 0 = ETH_PHY_LAN8720, 1 = ETH_PHY_TLK110, 2 = ETH_PHY_IP101
|
||||
// #define ETH_ADDR 0 // [EthAddress] 0 = PHY0 .. 31 = PHY31
|
||||
// #define ETH_CLKMODE 0 // [EthClockMode] 0 = ETH_CLOCK_GPIO0_IN, 1 = ETH_CLOCK_GPIO0_OUT, 2 = ETH_CLOCK_GPIO16_OUT, 3 = ETH_CLOCK_GPIO17_OUT
|
||||
// Wireless-Tag WT32-ETH01
|
||||
// #define ETH_TYPE 0 // [EthType] 0 = ETH_PHY_LAN8720, 1 = ETH_PHY_TLK110, 2 = ETH_PHY_IP101
|
||||
// #define ETH_ADDR 1 // [EthAddress] 0 = PHY0 .. 31 = PHY31
|
||||
// #define ETH_CLKMODE 0 // [EthClockMode] 0 = ETH_CLOCK_GPIO0_IN, 1 = ETH_CLOCK_GPIO0_OUT, 2 = ETH_CLOCK_GPIO16_OUT, 3 = ETH_CLOCK_GPIO17_OUT
|
||||
|
||||
#define USE_ADC // Add support for ADC on GPIO32 to GPIO39
|
||||
|
|
|
|||
|
|
@ -2359,7 +2359,9 @@ const char kModuleNames[] PROGMEM =
|
|||
"Odroid Go|"
|
||||
#endif // USE_ODROID_GO
|
||||
// "ESP32-Solo|"
|
||||
// "WT32-Eth01|"
|
||||
#ifdef USE_WT32_ETH01
|
||||
"WT32-Eth01|"
|
||||
#endif // USE_WT32_ETH01
|
||||
// "TTGO Watch|"
|
||||
#ifdef USE_M5STACK_CORE2
|
||||
"M5Stack Core2|"
|
||||
|
|
@ -2376,7 +2378,9 @@ const uint8_t kModuleNiceList[] PROGMEM = {
|
|||
ODROID_GO,
|
||||
#endif // USE_ODROID_GO
|
||||
// ESP32_SOLO,
|
||||
// WT32_ETH01,
|
||||
#ifdef USE_WT32_ETH01
|
||||
WT32_ETH01,
|
||||
#endif // USE_WT32_ETH01
|
||||
// TTGO_WATCH,
|
||||
#ifdef USE_M5STACK_CORE2
|
||||
M5STACK_CORE2,
|
||||
|
|
@ -2518,6 +2522,51 @@ const mytmplt kModules[] PROGMEM =
|
|||
0 // Flag
|
||||
},
|
||||
#endif // USE_ODROID_GO
|
||||
#ifdef USE_WT32_ETH01
|
||||
{ // WT32_ETH01 - (ESP32)
|
||||
0, // 0 (I)O GPIO0, Ethernet EMAC_REF_CLK
|
||||
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
||||
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
||||
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
|
||||
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
AGPIO(GPIO_USER), // 5 IO GPIO5, RXD Led green
|
||||
// 6 IO GPIO6, Flash CLK
|
||||
// 7 IO GPIO7, Flash D0
|
||||
// 8 IO GPIO8, Flash D1
|
||||
0, // 9 IO GPIO9, Flash D2, U1RXD
|
||||
0, // 10 IO GPIO10, Flash D3, U1TXD
|
||||
// 11 IO GPIO11, Flash CMD
|
||||
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
|
||||
0, // 13 IO GPIO13, Ethernet EMAC_RX_ER
|
||||
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
|
||||
AGPIO(GPIO_OUTPUT_HI), // 16 IO GPIO16, Ethernet OSC_ENA
|
||||
AGPIO(GPIO_LEDLNK_INV), // 17 IO GPIO17, Network link led (green)
|
||||
AGPIO(GPIO_ETH_PHY_MDIO), // 18 IO GPIO18, Ethernet MDIO
|
||||
0, // 19 IO GPIO19, Ethernet TXD0
|
||||
0, // 20
|
||||
0, // 21 IO GPIO21, Ethernet EMAC_TX_EN
|
||||
0, // 22 IO LED GPIO22, Ethernet EMAC_TXD1
|
||||
AGPIO(GPIO_ETH_PHY_MDC), // 23 IO GPIO23, Ethernet MDC
|
||||
0, // 24
|
||||
0, // 25 IO GPIO25, Ethernet EMAC_RXD0
|
||||
0, // 26 IO GPIO26, Ethernet EMAC_RXD1
|
||||
0, // 27 IO GPIO27, Ethernet EMAC_RX_DV
|
||||
0, // 28
|
||||
0, // 29
|
||||
0, // 30
|
||||
0, // 31
|
||||
AGPIO(GPIO_USER), // 32 IO GPIO32, CFG
|
||||
AGPIO(GPIO_USER), // 33 IO GPIO33, 485_EN
|
||||
0, // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
|
||||
AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
|
||||
AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
|
||||
0, // 37 NO PULLUP
|
||||
0, // 38 NO PULLUP
|
||||
AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
|
||||
0 // Flag
|
||||
},
|
||||
#endif // USE_WT32_ETH01
|
||||
#ifdef USE_M5STACK_CORE2
|
||||
{ // M5STACK CORE2 - (ESP32)
|
||||
AGPIO(GPIO_USER), // 0 (I)O GPIO0, SPKR_LRCK
|
||||
|
|
|
|||
|
|
@ -120,6 +120,12 @@ void EthernetInit(void) {
|
|||
return;
|
||||
}
|
||||
|
||||
if (WT32_ETH01 == TasmotaGlobal.module_type) {
|
||||
Settings.eth_address = 1; // EthAddress
|
||||
Settings.eth_type = ETH_PHY_LAN8720; // EthType
|
||||
Settings.eth_clk_mode = ETH_CLOCK_GPIO0_IN; // EthClockMode
|
||||
}
|
||||
|
||||
// snprintf_P(Eth.hostname, sizeof(Eth.hostname), PSTR("%s_eth"), TasmotaGlobal.hostname);
|
||||
strlcpy(eth_hostname, TasmotaGlobal.hostname, sizeof(eth_hostname) -5); // Make sure there is room for "_eth"
|
||||
strcat(eth_hostname, "_eth");
|
||||
|
|
|
|||
Loading…
Reference in New Issue