Add command ``Wifi 0/1`` for ESP8266

Add command ``Wifi 0/1`` for ESP8266 to turn wifi Off and On. When wifi is Off it is always returned On after a restart except for a wake-up from deepsleep (#11839)

CHANGELOG.md

@@ -4,6 +4,9 @@ All notable changes to this project will be documented in this file.
 ## [Unreleased] - Development
 
 ## [9.4.0.1]
+### Added
+- Command ``Wifi 0/1`` for ESP8266 to turn wifi Off and On. When wifi is Off it is always returned On after a restart except for a wake-up from deepsleep (#11839)
+
 ### Changed
 - Command ``Power`` should not reset pulsetime (#11805)
 - Zigbee refactored storage for device configuration and device last known data (#11838)

RELEASENOTES.md

@@ -78,6 +78,7 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
 
 ## Changelog v9.4.0.1
 ### Added
+- Command ``Wifi 0/1`` for ESP8266 to turn wifi Off and On. When wifi is Off it is always returned On after a restart except for a wake-up from deepsleep [#11839](https://github.com/arendst/Tasmota/issues/11839)
 
 ### Breaking Changed
 

tasmota/support_command.ino

@@ -25,7 +25,7 @@ const char kTasmotaCommands[] PROGMEM = "|"  // No prefix
   D_CMND_MODULE "|" D_CMND_MODULES "|" D_CMND_GPIO "|" D_CMND_GPIOS "|" D_CMND_TEMPLATE "|" D_CMND_PWM "|" D_CMND_PWMFREQUENCY "|" D_CMND_PWMRANGE "|"
   D_CMND_BUTTONDEBOUNCE "|" D_CMND_SWITCHDEBOUNCE "|" D_CMND_SYSLOG "|" D_CMND_LOGHOST "|" D_CMND_LOGPORT "|"
   D_CMND_SERIALBUFFER "|" D_CMND_SERIALSEND "|" D_CMND_BAUDRATE "|" D_CMND_SERIALCONFIG "|" D_CMND_SERIALDELIMITER "|"
-  D_CMND_IPADDRESS "|" D_CMND_NTPSERVER "|" D_CMND_AP "|" D_CMND_SSID "|" D_CMND_PASSWORD "|" D_CMND_HOSTNAME "|" D_CMND_WIFICONFIG "|"
+  D_CMND_IPADDRESS "|" D_CMND_NTPSERVER "|" D_CMND_AP "|" D_CMND_SSID "|" D_CMND_PASSWORD "|" D_CMND_HOSTNAME "|" D_CMND_WIFICONFIG "|" D_CMND_WIFI "|"
   D_CMND_DEVICENAME "|" D_CMND_FN "|" D_CMND_FRIENDLYNAME "|" D_CMND_SWITCHMODE "|" D_CMND_INTERLOCK "|" D_CMND_TELEPERIOD "|" D_CMND_RESET "|" D_CMND_TIME "|" D_CMND_TIMEZONE "|" D_CMND_TIMESTD "|"
   D_CMND_TIMEDST "|" D_CMND_ALTITUDE "|" D_CMND_LEDPOWER "|" D_CMND_LEDSTATE "|" D_CMND_LEDMASK "|" D_CMND_LEDPWM_ON "|" D_CMND_LEDPWM_OFF "|" D_CMND_LEDPWM_MODE "|"
   D_CMND_WIFIPOWER "|" D_CMND_TEMPOFFSET "|" D_CMND_HUMOFFSET "|" D_CMND_SPEEDUNIT "|" D_CMND_GLOBAL_TEMP "|" D_CMND_GLOBAL_HUM"|" D_CMND_SWITCHTEXT "|"
@@ -41,7 +41,7 @@ const char kTasmotaCommands[] PROGMEM = "|"  // No prefix
 #endif  // USE_DEVICE_GROUPS
   D_CMND_SENSOR "|" D_CMND_DRIVER
 #ifdef ESP32
-   "|Info|" D_CMND_TOUCH_CAL "|" D_CMND_TOUCH_THRES "|" D_CMND_TOUCH_NUM "|" D_CMND_CPU_FREQUENCY "|" D_CMND_WIFI
+   "|Info|" D_CMND_TOUCH_CAL "|" D_CMND_TOUCH_THRES "|" D_CMND_TOUCH_NUM "|" D_CMND_CPU_FREQUENCY
 #endif  // ESP32
   ;
 
@@ -53,7 +53,7 @@ void (* const TasmotaCommand[])(void) PROGMEM = {
   &CmndModule, &CmndModules, &CmndGpio, &CmndGpios, &CmndTemplate, &CmndPwm, &CmndPwmfrequency, &CmndPwmrange,
   &CmndButtonDebounce, &CmndSwitchDebounce, &CmndSyslog, &CmndLoghost, &CmndLogport,
   &CmndSerialBuffer, &CmndSerialSend, &CmndBaudrate, &CmndSerialConfig, &CmndSerialDelimiter,
-  &CmndIpAddress, &CmndNtpServer, &CmndAp, &CmndSsid, &CmndPassword, &CmndHostname, &CmndWifiConfig,
+  &CmndIpAddress, &CmndNtpServer, &CmndAp, &CmndSsid, &CmndPassword, &CmndHostname, &CmndWifiConfig, &CmndWifi,
   &CmndDevicename, &CmndFriendlyname, &CmndFriendlyname, &CmndSwitchMode, &CmndInterlock, &CmndTeleperiod, &CmndReset, &CmndTime, &CmndTimezone, &CmndTimeStd,
   &CmndTimeDst, &CmndAltitude, &CmndLedPower, &CmndLedState, &CmndLedMask, &CmndLedPwmOn, &CmndLedPwmOff, &CmndLedPwmMode,
   &CmndWifiPower, &CmndTempOffset, &CmndHumOffset, &CmndSpeedUnit, &CmndGlobalTemp, &CmndGlobalHum, &CmndSwitchText,
@@ -69,7 +69,7 @@ void (* const TasmotaCommand[])(void) PROGMEM = {
 #endif  // USE_DEVICE_GROUPS
   &CmndSensor, &CmndDriver
 #ifdef ESP32
-  , &CmndInfo, &CmndTouchCal, &CmndTouchThres, &CmndTouchNum, &CmndCpuFrequency, &CmndWifi
+  , &CmndInfo, &CmndTouchCal, &CmndTouchThres, &CmndTouchNum, &CmndCpuFrequency
 #endif  // ESP32
   };
 
@@ -2114,6 +2114,15 @@ void CmndWifiPower(void)
   ResponseCmndChar(WifiGetOutputPower().c_str());
 }
 
+void CmndWifi(void)
+{
+  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
+    Settings.flag4.network_wifi = XdrvMailbox.payload;
+    if (Settings.flag4.network_wifi) { WifiEnable(); }
+  }
+  ResponseCmndStateText(Settings.flag4.network_wifi);
+}
+
 #ifdef USE_I2C
 void CmndI2cScan(void)
 {
@@ -2217,15 +2226,6 @@ void CmndInfo(void) {
   ResponseCmndDone();
 }
 
-void CmndWifi(void)
-{
-  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
-    Settings.flag4.network_wifi = XdrvMailbox.payload;
-    TasmotaGlobal.restart_flag = 2;
-  }
-  ResponseCmndStateText(Settings.flag4.network_wifi);
-}
-
 void CmndCpuFrequency(void) {
   if ((80 == XdrvMailbox.payload) || (160 == XdrvMailbox.payload) || (240 == XdrvMailbox.payload)) {
     setCpuFrequencyMhz(XdrvMailbox.payload);

tasmota/support_tasmota.ino

@@ -1288,6 +1288,8 @@ void Every250mSeconds(void)
     if (Settings.flag4.network_wifi) {
       WifiCheck(TasmotaGlobal.wifi_state_flag);
       TasmotaGlobal.wifi_state_flag = WIFI_RESTART;
+    } else {
+      WifiDisable();
     }
     break;
   case 3:                                                 // Every x.75 second
@@ -1326,7 +1328,7 @@ void Every250mSeconds(void)
         StopWebserver();
       }
 #ifdef USE_EMULATION
-    if (Settings.flag2.emulation) { UdpConnect(); }
+      if (Settings.flag2.emulation) { UdpConnect(); }
 #endif  // USE_EMULATION
 #endif  // USE_WEBSERVER
 

tasmota/support_wifi.ino

@@ -567,6 +567,10 @@ RF_PRE_INIT()
 }
 #endif  // WIFI_RF_PRE_INIT
 
+void WifiEnable(void) {
+  Wifi.counter = 1;
+}
+
 void WifiConnect(void)
 {
   if (!Settings.flag4.network_wifi) { return; }
@@ -623,6 +627,14 @@ void WifiShutdown(bool option = false)
   delay(100);                 // Flush anything in the network buffers.
 }
 
+void WifiDisable(void) {
+  if (!TasmotaGlobal.global_state.wifi_down) {
+    WifiShutdown();
+    WifiSetMode(WIFI_OFF);
+  }
+  TasmotaGlobal.global_state.wifi_down = 1;
+}
+
 void EspRestart(void)
 {
   ResetPwm();

tasmota/tasmota.ino

@@ -288,6 +288,17 @@ void setup(void) {
     UpdateQuickPowerCycle(true);
   }
 
+  if (ResetReason() != REASON_DEEP_SLEEP_AWAKE) {
+#ifdef ESP8266
+    Settings.flag4.network_wifi = 1;           // Make sure we're in control
+#endif
+#ifdef ESP32
+    if (!Settings.flag4.network_ethernet) {
+      Settings.flag4.network_wifi = 1;         // Make sure we're in control
+    }
+#endif
+  }
+
   TasmotaGlobal.stop_flash_rotate = Settings.flag.stop_flash_rotate;  // SetOption12 - Switch between dynamic or fixed slot flash save location
   TasmotaGlobal.save_data_counter = Settings.save_data;
   TasmotaGlobal.sleep = Settings.sleep;