mirror of https://github.com/arendst/Tasmota.git
Add support for Shelly Add-On adapter
Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter
This commit is contained in:
Theo Arends
parent
79f464b46c
commit
186d3fcb4d
|
|
@ -56,7 +56,7 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
|
|||
|
||||
- Change Lights: simplified gamma correction and 10 bits internal computation
|
||||
- Change commands ``Prefix``, ``Ssid``, ``StateText``, ``NTPServer``, and ``FriendlyName`` displaying all items
|
||||
- Change IRremoteESP8266 library updated to v2.7.2
|
||||
- Change IRremoteESP8266 library updated to v2.7.3
|
||||
- Change Zigbee command prefix from ``Zigbee*`` to ``Zb*``
|
||||
- Change wifi connectivity stability (#7602)
|
||||
- Fix Sonoff Bridge, Sc, L1, iFan03 and CSE7766 serial interface to forced speed, config and disable logging
|
||||
|
|
@ -69,8 +69,10 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
|
|||
- Fix exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496)
|
||||
- Fix ``PowerDelta`` zero power detection (#7515)
|
||||
- Fix ``RGBWWTable`` ignored (#7572)
|
||||
- Fix PWM flickering at low levels (#7415)
|
||||
- Add command ``SetOption79 0/1`` to enable reset of counters at teleperiod time by Andre Thomas (#7355)
|
||||
- Add command ``SetOption82 0/1`` to limit the CT range for Alexa to 200..380
|
||||
- Add command ``SetOption84 1`` to send AWS IoT device shadow updates (alternative to retained)
|
||||
- Add command ``ShutterButton <parameters>`` to control shutter(s) by to-scho (#7403)
|
||||
- Add ``SwitchMode 8`` ToggleMulti, ``SwitchMode 9`` FollowMulti and ``SwitchMode 10`` FollowMultiInverted (#7522)
|
||||
- Add SerialConfig to ``Status 1``
|
||||
|
|
@ -87,3 +89,4 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
|
|||
- Add SoftwareSerial to CSE7766 driver allowing different GPIOs (#7563)
|
||||
- Add optional parameter <startcolor> to command ``Scheme <scheme>, <startcolor>`` to control initial start color
|
||||
- Add rule trigger on one level deeper using syntax with two ``#`` like ``on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...``
|
||||
- Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter
|
||||
|
|
|
|||
|
|
@ -1,12 +1,16 @@
|
|||
## Unreleased (development)
|
||||
|
||||
### 8.1.0.6 20200205
|
||||
|
||||
- Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter
|
||||
|
||||
### 8.1.0.5 20200126
|
||||
|
||||
- Change wifi connectivity stability (#7602)
|
||||
- Add ``SetOption84 1`` sends AWS IoT device shadow updates (alternative to retained)
|
||||
- Change update IRRemoteESP8266 v2.7.3
|
||||
- Add ``ZbBind`` (experimental) and bug fixes
|
||||
- Change IRremoteESP8266 library updated to v2.7.3
|
||||
- Fix PWM flickering at low levels (#7415)
|
||||
- Add ``SetOption84 1`` sends AWS IoT device shadow updates (alternative to retained)
|
||||
- Add ``ZbBind`` (experimental) and bug fixes
|
||||
|
||||
### 8.1.0.4 20200116
|
||||
|
||||
|
|
|
|||
|
|
@ -216,6 +216,7 @@ enum UserSelectablePins {
|
|||
GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface
|
||||
GPIO_GPS_RX, // GPS serial interface
|
||||
GPIO_GPS_TX, // GPS serial interface
|
||||
GPIO_DSB_OUT, // Pseudo Single wire DS18B20 or DS18S20
|
||||
GPIO_SENSOR_END };
|
||||
|
||||
// Programmer selectable GPIO functionality
|
||||
|
|
@ -296,7 +297,8 @@ const char kSensorNames[] PROGMEM =
|
|||
D_SENSOR_DEEPSLEEP "|" D_SENSOR_EXS_ENABLE "|"
|
||||
D_SENSOR_SLAVE_TX "|" D_SENSOR_SLAVE_RX "|" D_SENSOR_SLAVE_RESET "|" D_SENSOR_SLAVE_RESET "i|"
|
||||
D_SENSOR_HPMA_RX "|" D_SENSOR_HPMA_TX "|"
|
||||
D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX
|
||||
D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX "|"
|
||||
D_SENSOR_DS18X20 "o|"
|
||||
;
|
||||
|
||||
const char kSensorNamesFixed[] PROGMEM =
|
||||
|
|
@ -562,6 +564,7 @@ const uint8_t kGpioNiceList[] PROGMEM = {
|
|||
#endif
|
||||
#ifdef USE_DS18x20
|
||||
GPIO_DSB, // Single wire DS18B20 or DS18S20
|
||||
GPIO_DSB_OUT, // Pseudo Single wire DS18B20 or DS18S20
|
||||
#endif
|
||||
|
||||
// Light
|
||||
|
|
@ -1682,10 +1685,10 @@ const mytmplt kModules[MAXMODULE] PROGMEM = {
|
|||
0, 0
|
||||
},
|
||||
{ "Shelly 1", // SHELLY1 - Shelly1 Open Source (ESP8266 - 2MB) - https://shelly.cloud/shelly1-open-source/
|
||||
0, // GPIO00 - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC
|
||||
0, // GPIO01 Serial RXD - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC
|
||||
GPIO_USER, // GPIO00 - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC
|
||||
GPIO_USER, // GPIO01 Serial RXD - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC
|
||||
0,
|
||||
0, // GPIO03 Serial TXD - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC
|
||||
GPIO_USER, // GPIO03 Serial TXD - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC
|
||||
GPIO_REL1, // GPIO04 Relay (0 = Off, 1 = On)
|
||||
GPIO_SWT1_NP, // GPIO05 SW pin
|
||||
// GPIO06 (SD_CLK Flash)
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@
|
|||
#ifndef _TASMOTA_VERSION_H_
|
||||
#define _TASMOTA_VERSION_H_
|
||||
|
||||
const uint32_t VERSION = 0x08010005;
|
||||
const uint32_t VERSION = 0x08010006;
|
||||
|
||||
// Lowest compatible version
|
||||
const uint32_t VERSION_COMPATIBLE = 0x07010006;
|
||||
|
|
|
|||
|
|
@ -50,7 +50,9 @@ struct DS18X20STRUCT {
|
|||
float temperature;
|
||||
} ds18x20_sensor[DS18X20_MAX_SENSORS];
|
||||
uint8_t ds18x20_sensors = 0;
|
||||
uint8_t ds18x20_pin = 0;
|
||||
uint8_t ds18x20_pin = 0; // Shelly GPIO3 input only
|
||||
uint8_t ds18x20_pin_out = 0; // Shelly GPIO00 output only
|
||||
bool ds18x20_dual_mode = false; // Single pin mode
|
||||
char ds18x20_types[12];
|
||||
#ifdef W1_PARASITE_POWER
|
||||
uint8_t ds18x20_sensor_curr = 0;
|
||||
|
|
@ -69,11 +71,13 @@ uint8_t onewire_last_family_discrepancy = 0;
|
|||
bool onewire_last_device_flag = false;
|
||||
unsigned char onewire_rom_id[8] = { 0 };
|
||||
|
||||
/*------------------------------------------------------------------------------------------*/
|
||||
|
||||
uint8_t OneWireReset(void)
|
||||
{
|
||||
uint8_t retries = 125;
|
||||
|
||||
//noInterrupts();
|
||||
if (!ds18x20_dual_mode) {
|
||||
pinMode(ds18x20_pin, Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT); // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
||||
do {
|
||||
if (--retries == 0) {
|
||||
|
|
@ -85,9 +89,20 @@ uint8_t OneWireReset(void)
|
|||
digitalWrite(ds18x20_pin, LOW);
|
||||
delayMicroseconds(480);
|
||||
pinMode(ds18x20_pin, Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT); // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
||||
} else {
|
||||
digitalWrite(ds18x20_pin_out, HIGH);
|
||||
do {
|
||||
if (--retries == 0) {
|
||||
return 0;
|
||||
}
|
||||
delayMicroseconds(2);
|
||||
} while (!digitalRead(ds18x20_pin));
|
||||
digitalWrite(ds18x20_pin_out, LOW);
|
||||
delayMicroseconds(480);
|
||||
digitalWrite(ds18x20_pin_out, HIGH);
|
||||
}
|
||||
delayMicroseconds(70);
|
||||
uint8_t r = !digitalRead(ds18x20_pin);
|
||||
//interrupts();
|
||||
delayMicroseconds(410);
|
||||
return r;
|
||||
}
|
||||
|
|
@ -98,29 +113,39 @@ void OneWireWriteBit(uint8_t v)
|
|||
static const uint8_t delay_high[2] = { 5, 55 };
|
||||
|
||||
v &= 1;
|
||||
//noInterrupts();
|
||||
if (!ds18x20_dual_mode) {
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
delayMicroseconds(delay_low[v]);
|
||||
digitalWrite(ds18x20_pin, HIGH);
|
||||
//interrupts();
|
||||
} else {
|
||||
digitalWrite(ds18x20_pin_out, LOW);
|
||||
delayMicroseconds(delay_low[v]);
|
||||
digitalWrite(ds18x20_pin_out, HIGH);
|
||||
}
|
||||
delayMicroseconds(delay_high[v]);
|
||||
}
|
||||
|
||||
uint8_t OneWireReadBit(void)
|
||||
{
|
||||
//noInterrupts();
|
||||
if (!ds18x20_dual_mode) {
|
||||
pinMode(ds18x20_pin, OUTPUT);
|
||||
digitalWrite(ds18x20_pin, LOW);
|
||||
delayMicroseconds(3);
|
||||
pinMode(ds18x20_pin, Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT); // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
||||
} else {
|
||||
digitalWrite(ds18x20_pin_out, LOW);
|
||||
delayMicroseconds(3);
|
||||
digitalWrite(ds18x20_pin_out, HIGH);
|
||||
}
|
||||
delayMicroseconds(10);
|
||||
uint8_t r = digitalRead(ds18x20_pin);
|
||||
//interrupts();
|
||||
delayMicroseconds(53);
|
||||
return r;
|
||||
}
|
||||
|
||||
/*------------------------------------------------------------------------------------------*/
|
||||
|
||||
void OneWireWrite(uint8_t v)
|
||||
{
|
||||
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
||||
|
|
@ -259,6 +284,12 @@ void Ds18x20Init(void)
|
|||
uint64_t ids[DS18X20_MAX_SENSORS];
|
||||
|
||||
ds18x20_pin = pin[GPIO_DSB];
|
||||
if (pin[GPIO_DSB_OUT] < 99) {
|
||||
ds18x20_pin_out = pin[GPIO_DSB_OUT];
|
||||
ds18x20_dual_mode = true; // Dual pins mode as used by Shelly
|
||||
pinMode(ds18x20_pin_out, OUTPUT);
|
||||
pinMode(ds18x20_pin, Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT); // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
||||
}
|
||||
|
||||
OneWireResetSearch();
|
||||
|
||||
|
|
|
|||
|
|
@ -1,463 +0,0 @@
|
|||
/*
|
||||
xsns_05_ds18x20.ino - DS18x20 temperature sensor support for Tasmota
|
||||
|
||||
Copyright (C) 2020 Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifdef USE_DS18x20SHELLY
|
||||
/*********************************************************************************************\
|
||||
* DS18B20 - Temperature - Multiple sensors
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XSNS_05 5
|
||||
|
||||
//#define USE_DS18x20_RECONFIGURE // When sensor is lost keep retrying or re-configure
|
||||
|
||||
#define DS18S20_CHIPID 0x10 // +/-0.5C 9-bit
|
||||
#define DS1822_CHIPID 0x22 // +/-2C 12-bit
|
||||
#define DS18B20_CHIPID 0x28 // +/-0.5C 12-bit
|
||||
#define MAX31850_CHIPID 0x3B // +/-0.25C 14-bit
|
||||
|
||||
#define W1_SKIP_ROM 0xCC
|
||||
#define W1_CONVERT_TEMP 0x44
|
||||
#define W1_WRITE_EEPROM 0x48
|
||||
#define W1_WRITE_SCRATCHPAD 0x4E
|
||||
#define W1_READ_SCRATCHPAD 0xBE
|
||||
|
||||
#define DS18X20_MAX_SENSORS 8
|
||||
|
||||
const char kDs18x20Types[] PROGMEM = "DS18x20|DS18S20|DS1822|DS18B20|MAX31850";
|
||||
|
||||
uint8_t ds18x20_chipids[] = { 0, DS18S20_CHIPID, DS1822_CHIPID, DS18B20_CHIPID, MAX31850_CHIPID };
|
||||
|
||||
struct DS18X20STRUCT {
|
||||
uint8_t address[8];
|
||||
uint8_t index;
|
||||
uint8_t valid;
|
||||
float temperature;
|
||||
} ds18x20_sensor[DS18X20_MAX_SENSORS];
|
||||
uint8_t ds18x20_sensors = 0;
|
||||
uint8_t ds18x20_pin_in = 3; // Shelly GPIO03
|
||||
uint8_t ds18x20_pin_out = 0; // Shelly GPIO02
|
||||
char ds18x20_types[12];
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Embedded tuned OneWire library
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define W1_MATCH_ROM 0x55
|
||||
#define W1_SEARCH_ROM 0xF0
|
||||
|
||||
uint8_t onewire_last_discrepancy = 0;
|
||||
uint8_t onewire_last_family_discrepancy = 0;
|
||||
bool onewire_last_device_flag = false;
|
||||
unsigned char onewire_rom_id[8] = { 0 };
|
||||
|
||||
uint8_t OneWireReset(void)
|
||||
{
|
||||
uint8_t retries = 125;
|
||||
|
||||
//noInterrupts();
|
||||
pinMode(ds18x20_pin_in, Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT); // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
||||
do {
|
||||
if (--retries == 0) {
|
||||
return 0;
|
||||
}
|
||||
delayMicroseconds(2);
|
||||
} while (!digitalRead(ds18x20_pin_in));
|
||||
pinMode(ds18x20_pin_out, OUTPUT);
|
||||
digitalWrite(ds18x20_pin_out, LOW);
|
||||
delayMicroseconds(480);
|
||||
pinMode(ds18x20_pin_in, Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT); // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
||||
delayMicroseconds(70);
|
||||
uint8_t r = !digitalRead(ds18x20_pin_in);
|
||||
//interrupts();
|
||||
delayMicroseconds(410);
|
||||
return r;
|
||||
}
|
||||
|
||||
void OneWireWriteBit(uint8_t v)
|
||||
{
|
||||
static const uint8_t delay_low[2] = { 65, 10 };
|
||||
static const uint8_t delay_high[2] = { 5, 55 };
|
||||
|
||||
v &= 1;
|
||||
//noInterrupts();
|
||||
digitalWrite(ds18x20_pin_out, LOW);
|
||||
pinMode(ds18x20_pin_out, OUTPUT);
|
||||
delayMicroseconds(delay_low[v]);
|
||||
digitalWrite(ds18x20_pin_out, HIGH);
|
||||
//interrupts();
|
||||
delayMicroseconds(delay_high[v]);
|
||||
}
|
||||
|
||||
uint8_t OneWireReadBit(void)
|
||||
{
|
||||
//noInterrupts();
|
||||
pinMode(ds18x20_pin_out, OUTPUT);
|
||||
digitalWrite(ds18x20_pin_out, LOW);
|
||||
delayMicroseconds(3);
|
||||
pinMode(ds18x20_pin_in, Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT); // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
||||
delayMicroseconds(10);
|
||||
uint8_t r = digitalRead(ds18x20_pin_in);
|
||||
//interrupts();
|
||||
delayMicroseconds(53);
|
||||
return r;
|
||||
}
|
||||
|
||||
void OneWireWrite(uint8_t v)
|
||||
{
|
||||
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
||||
OneWireWriteBit((bit_mask & v) ? 1 : 0);
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t OneWireRead(void)
|
||||
{
|
||||
uint8_t r = 0;
|
||||
|
||||
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
||||
if (OneWireReadBit()) {
|
||||
r |= bit_mask;
|
||||
}
|
||||
}
|
||||
return r;
|
||||
}
|
||||
|
||||
void OneWireSelect(const uint8_t rom[8])
|
||||
{
|
||||
OneWireWrite(W1_MATCH_ROM);
|
||||
for (uint32_t i = 0; i < 8; i++) {
|
||||
OneWireWrite(rom[i]);
|
||||
}
|
||||
}
|
||||
|
||||
void OneWireResetSearch(void)
|
||||
{
|
||||
onewire_last_discrepancy = 0;
|
||||
onewire_last_device_flag = false;
|
||||
onewire_last_family_discrepancy = 0;
|
||||
for (uint32_t i = 0; i < 8; i++) {
|
||||
onewire_rom_id[i] = 0;
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t OneWireSearch(uint8_t *newAddr)
|
||||
{
|
||||
uint8_t id_bit_number = 1;
|
||||
uint8_t last_zero = 0;
|
||||
uint8_t rom_byte_number = 0;
|
||||
uint8_t search_result = 0;
|
||||
uint8_t id_bit;
|
||||
uint8_t cmp_id_bit;
|
||||
unsigned char rom_byte_mask = 1;
|
||||
unsigned char search_direction;
|
||||
|
||||
if (!onewire_last_device_flag) {
|
||||
if (!OneWireReset()) {
|
||||
onewire_last_discrepancy = 0;
|
||||
onewire_last_device_flag = false;
|
||||
onewire_last_family_discrepancy = 0;
|
||||
return false;
|
||||
}
|
||||
OneWireWrite(W1_SEARCH_ROM);
|
||||
do {
|
||||
id_bit = OneWireReadBit();
|
||||
cmp_id_bit = OneWireReadBit();
|
||||
|
||||
if ((id_bit == 1) && (cmp_id_bit == 1)) {
|
||||
break;
|
||||
} else {
|
||||
if (id_bit != cmp_id_bit) {
|
||||
search_direction = id_bit;
|
||||
} else {
|
||||
if (id_bit_number < onewire_last_discrepancy) {
|
||||
search_direction = ((onewire_rom_id[rom_byte_number] & rom_byte_mask) > 0);
|
||||
} else {
|
||||
search_direction = (id_bit_number == onewire_last_discrepancy);
|
||||
}
|
||||
if (search_direction == 0) {
|
||||
last_zero = id_bit_number;
|
||||
if (last_zero < 9) {
|
||||
onewire_last_family_discrepancy = last_zero;
|
||||
}
|
||||
}
|
||||
}
|
||||
if (search_direction == 1) {
|
||||
onewire_rom_id[rom_byte_number] |= rom_byte_mask;
|
||||
} else {
|
||||
onewire_rom_id[rom_byte_number] &= ~rom_byte_mask;
|
||||
}
|
||||
OneWireWriteBit(search_direction);
|
||||
id_bit_number++;
|
||||
rom_byte_mask <<= 1;
|
||||
if (rom_byte_mask == 0) {
|
||||
rom_byte_number++;
|
||||
rom_byte_mask = 1;
|
||||
}
|
||||
}
|
||||
} while (rom_byte_number < 8);
|
||||
if (!(id_bit_number < 65)) {
|
||||
onewire_last_discrepancy = last_zero;
|
||||
if (onewire_last_discrepancy == 0) {
|
||||
onewire_last_device_flag = true;
|
||||
}
|
||||
search_result = true;
|
||||
}
|
||||
}
|
||||
if (!search_result || !onewire_rom_id[0]) {
|
||||
onewire_last_discrepancy = 0;
|
||||
onewire_last_device_flag = false;
|
||||
onewire_last_family_discrepancy = 0;
|
||||
search_result = false;
|
||||
}
|
||||
for (uint32_t i = 0; i < 8; i++) {
|
||||
newAddr[i] = onewire_rom_id[i];
|
||||
}
|
||||
return search_result;
|
||||
}
|
||||
|
||||
bool OneWireCrc8(uint8_t *addr)
|
||||
{
|
||||
uint8_t crc = 0;
|
||||
uint8_t len = 8;
|
||||
|
||||
while (len--) {
|
||||
uint8_t inbyte = *addr++; // from 0 to 7
|
||||
for (uint32_t i = 8; i; i--) {
|
||||
uint8_t mix = (crc ^ inbyte) & 0x01;
|
||||
crc >>= 1;
|
||||
if (mix) {
|
||||
crc ^= 0x8C;
|
||||
}
|
||||
inbyte >>= 1;
|
||||
}
|
||||
}
|
||||
return (crc == *addr); // addr 8
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Ds18x20Init(void)
|
||||
{
|
||||
uint64_t ids[DS18X20_MAX_SENSORS];
|
||||
|
||||
// ds18x20_pin = pin[GPIO_DSB];
|
||||
|
||||
OneWireResetSearch();
|
||||
|
||||
ds18x20_sensors = 0;
|
||||
while (ds18x20_sensors < DS18X20_MAX_SENSORS) {
|
||||
if (!OneWireSearch(ds18x20_sensor[ds18x20_sensors].address)) {
|
||||
break;
|
||||
}
|
||||
if (OneWireCrc8(ds18x20_sensor[ds18x20_sensors].address) &&
|
||||
((ds18x20_sensor[ds18x20_sensors].address[0] == DS18S20_CHIPID) ||
|
||||
(ds18x20_sensor[ds18x20_sensors].address[0] == DS1822_CHIPID) ||
|
||||
(ds18x20_sensor[ds18x20_sensors].address[0] == DS18B20_CHIPID) ||
|
||||
(ds18x20_sensor[ds18x20_sensors].address[0] == MAX31850_CHIPID))) {
|
||||
ds18x20_sensor[ds18x20_sensors].index = ds18x20_sensors;
|
||||
ids[ds18x20_sensors] = ds18x20_sensor[ds18x20_sensors].address[0]; // Chip id
|
||||
for (uint32_t j = 6; j > 0; j--) {
|
||||
ids[ds18x20_sensors] = ids[ds18x20_sensors] << 8 | ds18x20_sensor[ds18x20_sensors].address[j];
|
||||
}
|
||||
ds18x20_sensors++;
|
||||
}
|
||||
}
|
||||
for (uint32_t i = 0; i < ds18x20_sensors; i++) {
|
||||
for (uint32_t j = i + 1; j < ds18x20_sensors; j++) {
|
||||
if (ids[ds18x20_sensor[i].index] > ids[ds18x20_sensor[j].index]) { // Sort ascending
|
||||
std::swap(ds18x20_sensor[i].index, ds18x20_sensor[j].index);
|
||||
}
|
||||
}
|
||||
}
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSORS_FOUND " %d"), ds18x20_sensors);
|
||||
}
|
||||
|
||||
void Ds18x20Convert(void)
|
||||
{
|
||||
OneWireReset();
|
||||
OneWireWrite(W1_SKIP_ROM); // Address all Sensors on Bus
|
||||
OneWireWrite(W1_CONVERT_TEMP); // start conversion, no parasite power on at the end
|
||||
// delay(750); // 750ms should be enough for 12bit conv
|
||||
}
|
||||
|
||||
bool Ds18x20Read(uint8_t sensor)
|
||||
{
|
||||
uint8_t data[9];
|
||||
int8_t sign = 1;
|
||||
|
||||
uint8_t index = ds18x20_sensor[sensor].index;
|
||||
if (ds18x20_sensor[index].valid) { ds18x20_sensor[index].valid--; }
|
||||
for (uint32_t retry = 0; retry < 3; retry++) {
|
||||
OneWireReset();
|
||||
OneWireSelect(ds18x20_sensor[index].address);
|
||||
OneWireWrite(W1_READ_SCRATCHPAD);
|
||||
for (uint32_t i = 0; i < 9; i++) {
|
||||
data[i] = OneWireRead();
|
||||
}
|
||||
if (OneWireCrc8(data)) {
|
||||
switch(ds18x20_sensor[index].address[0]) {
|
||||
case DS18S20_CHIPID: {
|
||||
if (data[1] > 0x80) {
|
||||
data[0] = (~data[0]) +1;
|
||||
sign = -1; // App-Note fix possible sign error
|
||||
}
|
||||
float temp9 = (float)(data[0] >> 1) * sign;
|
||||
ds18x20_sensor[index].temperature = ConvertTemp((temp9 - 0.25) + ((16.0 - data[6]) / 16.0));
|
||||
ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
|
||||
return true;
|
||||
}
|
||||
case DS1822_CHIPID:
|
||||
case DS18B20_CHIPID: {
|
||||
if (data[4] != 0x7F) {
|
||||
data[4] = 0x7F; // Set resolution to 12-bit
|
||||
OneWireReset();
|
||||
OneWireSelect(ds18x20_sensor[index].address);
|
||||
OneWireWrite(W1_WRITE_SCRATCHPAD);
|
||||
OneWireWrite(data[2]); // Th Register
|
||||
OneWireWrite(data[3]); // Tl Register
|
||||
OneWireWrite(data[4]); // Configuration Register
|
||||
OneWireSelect(ds18x20_sensor[index].address);
|
||||
OneWireWrite(W1_WRITE_EEPROM); // Save scratchpad to EEPROM
|
||||
}
|
||||
uint16_t temp12 = (data[1] << 8) + data[0];
|
||||
if (temp12 > 2047) {
|
||||
temp12 = (~temp12) +1;
|
||||
sign = -1;
|
||||
}
|
||||
ds18x20_sensor[index].temperature = ConvertTemp(sign * temp12 * 0.0625); // Divide by 16
|
||||
ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
|
||||
return true;
|
||||
}
|
||||
case MAX31850_CHIPID: {
|
||||
int16_t temp14 = (data[1] << 8) + (data[0] & 0xFC);
|
||||
ds18x20_sensor[index].temperature = ConvertTemp(temp14 * 0.0625); // Divide by 16
|
||||
ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
|
||||
return true;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_CRC_ERROR));
|
||||
return false;
|
||||
}
|
||||
|
||||
void Ds18x20Name(uint8_t sensor)
|
||||
{
|
||||
uint8_t index = sizeof(ds18x20_chipids);
|
||||
while (index) {
|
||||
if (ds18x20_sensor[ds18x20_sensor[sensor].index].address[0] == ds18x20_chipids[index]) {
|
||||
break;
|
||||
}
|
||||
index--;
|
||||
}
|
||||
GetTextIndexed(ds18x20_types, sizeof(ds18x20_types), index, kDs18x20Types);
|
||||
if (ds18x20_sensors > 1) {
|
||||
snprintf_P(ds18x20_types, sizeof(ds18x20_types), PSTR("%s%c%d"), ds18x20_types, IndexSeparator(), sensor +1);
|
||||
}
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Ds18x20EverySecond(void)
|
||||
{
|
||||
if (uptime & 1) {
|
||||
// 2mS
|
||||
Ds18x20Convert(); // Start conversion, takes up to one second
|
||||
} else {
|
||||
for (uint32_t i = 0; i < ds18x20_sensors; i++) {
|
||||
// 12mS per device
|
||||
if (!Ds18x20Read(i)) { // Read temperature
|
||||
Ds18x20Name(i);
|
||||
AddLogMissed(ds18x20_types, ds18x20_sensor[ds18x20_sensor[i].index].valid);
|
||||
#ifdef USE_DS18x20_RECONFIGURE
|
||||
if (!ds18x20_sensor[ds18x20_sensor[i].index].valid) {
|
||||
memset(&ds18x20_sensor, 0, sizeof(ds18x20_sensor));
|
||||
Ds18x20Init(); // Re-configure
|
||||
}
|
||||
#endif // USE_DS18x20_RECONFIGURE
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void Ds18x20Show(bool json)
|
||||
{
|
||||
for (uint32_t i = 0; i < ds18x20_sensors; i++) {
|
||||
uint8_t index = ds18x20_sensor[i].index;
|
||||
|
||||
if (ds18x20_sensor[index].valid) { // Check for valid temperature
|
||||
char temperature[33];
|
||||
dtostrfd(ds18x20_sensor[index].temperature, Settings.flag2.temperature_resolution, temperature);
|
||||
|
||||
Ds18x20Name(i);
|
||||
|
||||
if (json) {
|
||||
char address[17];
|
||||
for (uint32_t j = 0; j < 6; j++) {
|
||||
sprintf(address+2*j, "%02X", ds18x20_sensor[index].address[6-j]); // Skip sensor type and crc
|
||||
}
|
||||
ResponseAppend_P(PSTR(",\"%s\":{\"" D_JSON_ID "\":\"%s\",\"" D_JSON_TEMPERATURE "\":%s}"), ds18x20_types, address, temperature);
|
||||
#ifdef USE_DOMOTICZ
|
||||
if ((0 == tele_period) && (0 == i)) {
|
||||
DomoticzSensor(DZ_TEMP, temperature);
|
||||
}
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_KNX
|
||||
if ((0 == tele_period) && (0 == i)) {
|
||||
KnxSensor(KNX_TEMPERATURE, ds18x20_sensor[index].temperature);
|
||||
}
|
||||
#endif // USE_KNX
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
WSContentSend_PD(HTTP_SNS_TEMP, ds18x20_types, temperature, TempUnit());
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Interface
|
||||
\*********************************************************************************************/
|
||||
|
||||
bool Xsns05(uint8_t function)
|
||||
{
|
||||
bool result = false;
|
||||
|
||||
// if (pin[GPIO_DSB] < 99) {
|
||||
switch (function) {
|
||||
case FUNC_INIT:
|
||||
Ds18x20Init();
|
||||
break;
|
||||
case FUNC_EVERY_SECOND:
|
||||
Ds18x20EverySecond();
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
Ds18x20Show(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_WEB_SENSOR:
|
||||
Ds18x20Show(0);
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
// }
|
||||
return result;
|
||||
}
|
||||
|
||||
#endif // USE_DS18x20SHELLY
|
||||
Loading…
Reference in New Issue