v5.10.0e

5.10.0e * Add Italian language file (#1449) * Fix Wemo Emulation once again closest to issue (#1357)
2017-12-28 13:43:51 +01:00 · 2017-12-28 13:43:51 +01:00 · 20619ac41b
parent 122b2a610c
commit 20619ac41b
8 changed files with 843 additions and 15 deletions
--- a/README.md
+++ b/README.md
@ -1,7 +1,7 @@
 ## Sonoff-Tasmota
 Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.

-Current version is **5.10.0d** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
+Current version is **5.10.0e** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.

 ### ATTENTION All versions

@ -42,6 +42,7 @@ The following devices are supported:
 - [iTead Sonoff 4CH](https://www.itead.cc/smart-home/sonoff-4ch.html)
 - [iTead Sonoff 4CH Pro](https://www.itead.cc/smart-home/sonoff-4ch-pro.html)
 - [iTead S20 Smart Socket](https://www.itead.cc/smart-socket.html)
+- [Sonoff S22 Smart Socket](https://github.com/arendst/Sonoff-Tasmota/issues/627)
 - [iTead Slampher](https://www.itead.cc/slampher.html)
 - [iTead Sonoff Touch](https://www.itead.cc/sonoff-touch.html)
 - [iTead Sonoff T1](https://www.itead.cc/sonoff-t1.html)
@ -54,8 +55,13 @@ The following devices are supported:
 - [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
 - [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
 - [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
- [AI Light or any my9291 compatible RGBW LED](http://www.ebay.com/itm/172644855726)
- MagicHome and AriLux AL-LC01 and AL-LC11
+- AI Light or any my9291 compatible RGBW LED bulb
+- H801 PWM LED controller
+- [MagicHome PWM LED controller](https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller)
+- AriLux AL-LC01, AL-LC06 and AL-LC11 PWM LED controller
+- [Supla device - Espablo-inCan mod. for electrical Installation box](https://forum.supla.org/viewtopic.php?f=33&t=2188)
+- [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
+- Wemos D1 mini and NodeMcu

 ### License

--- a/platformio.ini
+++ b/platformio.ini
@ -15,6 +15,8 @@ src_dir = sonoff
 ;env_default = sonoff-NL
 ;env_default = sonoff-DE
 ;env_default = sonoff-PL
+;env_default = sonoff-IT
+;env_default = sonoff-emulation
 ;env_default = sonoff-minimal
 ;env_default = sonoff-ds18x20

@ -73,8 +75,31 @@ lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
 ; *** Serial Monitor options
 monitor_baud = 115200

+[env:sonoff-IT]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+build_flags = -Wl,-Tesp8266.flash.1m0.ld -DMQTT_MAX_PACKET_SIZE=512 -DMY_LANGUAGE=it-IT
+lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
+
+; *** Serial Monitor options
+monitor_baud = 115200
+
+; Sonoff with Wemo and Hue emulation
+[env:sonoff-emulation]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+build_flags = -Wl,-Tesp8266.flash.1m0.ld -DMQTT_MAX_PACKET_SIZE=512 -DUSE_EMULATION
+lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
+
+; Serial Monitor options
+monitor_baud = 115200
+
 ; Sonoff minimal
-[env:sonoff-minimal] ; Placeholder to be configured
+[env:sonoff-minimal]
 platform = espressif8266
 framework = arduino
 board = esp01_1m
--- a/sonoff/_releasenotes.ino
+++ b/sonoff/_releasenotes.ino
@ -1,4 +1,8 @@
-/* 5.10.0d
+/* 5.10.0e
+ * Add Italian language file (#1449)
+ * Fix Wemo Emulation once again closest to issue (#1357)
+ *
+ * 5.10.0d
 * Renamed commands Color2,3,4 to Color3,4,5
 * Add command Color2 to set color while keeping same dimmer value
 * Add led signal to Carbon Dioxide (CO2) sensors (see user_config.h)
--- a/sonoff/language/it-IT.h
+++ b/sonoff/language/it-IT.h
@ -0,0 +1,710 @@
+/*
+  it-IT.h - localization for Italian - Italy for Sonoff-Tasmota
+
+  Copyright (C) 2018 Gennaro Tortone
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _LANGUAGE_IT_IT_H_
+#define _LANGUAGE_IT_IT_H_
+
+/*************************** ATTENTION *******************************\
+ *
+ * Due to memory constraints only UTF-8 is supported.
+ * To save code space keep text as short as possible.
+ * Time and Date provided by SDK can not be localized (yet).
+ * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
+ * Use online command Prefix to translate cmnd, stat and tele.
+ *
+\*********************************************************************/
+
+// "2017-03-07T11:08:02" - ISO8601:2004
+#define D_YEAR_MONTH_SEPARATOR "-"
+#define D_MONTH_DAY_SEPARATOR "-"
+#define D_DATE_TIME_SEPARATOR "T"
+#define D_HOUR_MINUTE_SEPARATOR ":"
+#define D_MINUTE_SECOND_SEPARATOR ":"
+
+#define D_DAY3LIST "DomLunMarMerGioVenSab"
+#define D_MONTH3LIST "GenFebMarAprMagGiuLugAgoSetOttNovDic"
+
+// Non JSON decimal separator
+#define D_DECIMAL_SEPARATOR "."
+
+// Common
+#define D_ABORTED "Aborted"
+#define D_ACTIVE "Active"
+#define D_ADDRESS "Address"
+#define D_ADMIN "Admin"
+#define D_AIR_QUALITY "Qualita' dell'aria"
+#define D_AIRQUALITY "AirQuality"
+#define D_AP "AP"                    // Access Point
+#define D_APMAC_ADDRESS "APMac"
+#define D_APPENDED "Appended"
+#define D_AS "come"
+#define D_AUTO "AUTO"
+#define D_BAUDRATE "Baudrate"
+#define D_BLINK "Blink"
+#define D_BLINKOFF "BlinkOff"
+#define D_BOOTVERSION "Boot"
+#define D_BOOT_COUNT "Boot Count"
+#define D_BOOTCOUNT "BootCount"
+#define D_BRIGHTLIGHT "Luminoso"
+#define D_BUILDDATETIME "BuildDateTime"
+#define D_BUTTON "Pulsante"
+#define D_BY "da"                    // Written by me
+#define D_CELSIUS "Celsius"
+#define D_CO2 "CO2"
+#define D_CODE "codice"                // Button code
+#define D_COLDLIGHT "Fredda"
+#define D_COMMAND "Command"
+#define D_CONNECTED "Connesso"
+#define D_COREVERSION "Core"
+#define D_COUNT "Conteggio"
+#define D_COUNTER "Counter"
+#define D_CURRENT "Current"          // As in Voltage and Current
+#define D_DATA "Data"
+#define D_DARKLIGHT "Scuro"
+#define D_DEBUG "Debug"
+#define D_DISABLED "Disabilitato"
+#define D_DNS_SERVER "DNS Server"
+#define D_DNSSERVER "DNSServer"
+#define D_DONE "Done"
+#define D_DST_TIME "DST"
+#define D_EMPTY "Empty"
+#define D_EMULATION "Emulazione"
+#define D_ENABLED "Abilitato"
+#define D_ENDDST "EndDST"           // End Daylight Savings Time
+#define D_ERASE "Erase"
+#define D_ERROR "Error"
+#define D_EVERY "Ogni"
+#define D_FAHRENHEIT "Fahrenheit"
+#define D_FAILED "Fallito"
+#define D_FALLBACK "Fallback"
+#define D_FALLBACK_TOPIC "Topic Riserva"
+#define D_FALLBACKTOPIC "FallbackTopic"
+#define D_FALSE "False"
+#define D_FILE "File"
+#define D_FLASHMODE "FlashMode"
+#define D_FLASHSIZE "FlashSize"
+#define D_FREE_MEMORY "Memoria Libera"
+#define D_FREEMEMORY "Free"
+#define D_FROM "from"
+#define D_GAS "Gas"
+#define D_GATEWAY "Gateway"
+#define D_GROUP "Gruppo"
+#define D_HEAPSIZE "Heap"
+#define D_HIGH "High"
+#define D_HOST "Host"
+#define D_HOSTNAME "Hostname"
+#define D_HUMIDITY "Humidity"
+#define D_ID "Id"
+#define D_ILLUMINANCE "Illuminazione"
+#define D_IMMEDIATE "immediato"      // Button immediate
+#define D_INDEX "Index"
+#define D_INFO "Info"
+#define D_INITIALIZED "Inizializzato"
+#define D_IP_ADDRESS "Indirizzo IP"
+#define D_LIGHT "Light"
+#define D_LIMIT "Limit"
+#define D_LOCAL_TIME "Local"
+#define D_LOW "Low"
+#define D_LWT "LWT"
+#define D_MAC "Mac"
+#define D_MASK "Mask"
+#define D_MODULE "Module"
+#define D_MQTT "MQTT"
+#define D_MULTI_PRESS "multi-pressione"
+#define D_NO "No"
+#define D_NOISE "Noise"
+#define D_NONE "Nessuno"
+#define D_OFF "Off"
+#define D_OFFLINE "Offline"
+#define D_OK "Ok"
+#define D_ON "On"
+#define D_ONLINE "Online"
+#define D_OR "or"
+#define D_PASSWORD "Password"
+#define D_PERIOD "Period"
+#define D_PORT "Porta"
+#define D_POWER_FACTOR "Fattore di potenza"
+#define D_POWERFACTOR "Factor"
+#define D_POWERUSAGE "Power"
+#define D_PRESSURE "Pressure"
+#define D_PRESSUREATSEALEVEL "SeaPressure"
+#define D_PROGRAM_FLASH_SIZE "Dimensione Flash Programma"
+#define D_PROGRAMFLASHSIZE "ProgramFlashSize"
+#define D_PROGRAM_SIZE "Dimensione Programma"
+#define D_PROGRAMSIZE "ProgramSize"
+#define D_PROJECT "Project"
+#define D_RECEIVED "Ricevuto"
+#define D_RESTART "Riavvio"
+#define D_RESTARTING "Restarting"
+#define D_RESTART_REASON "Causa Riavvio"
+#define D_RESTARTREASON "RestartReason"
+#define D_RESTORE "ripristino"
+#define D_RETAINED "salvato"
+#define D_SAVE "Salva"
+#define D_SAVEADDRESS "SaveAddress"
+#define D_SAVECOUNT "SaveCount"
+#define D_SAVESTATE "SaveState"
+#define D_SDKVERSION "SDK"
+#define D_SELECTED "selected"
+#define D_SENSOR "Sensore"
+#define D_SERIAL "Seriale"
+#define D_BYTES "Bytes"
+#define D_SSID "SSId"
+#define D_START "Start"
+#define D_STARTED "Started"
+#define D_STARTDST "StartDST"        // Start Daylight Savings Time
+#define D_STD_TIME "STD"
+#define D_STOP "Stop"
+#define D_SUBNET_MASK "Maschera sottorete"
+#define D_SUBNETMASK "Subnetmask"
+#define D_SUBSCRIBE_TO "Sottoscrivi a"
+#define D_SUCCESSFUL "Successful"
+#define D_SWITCH "Switch"
+#define D_SYNC "Sync"
+#define D_SYS "Sys"                  // Sys log
+#define D_TEMPERATURE "Temperature"
+#define D_TEMPERATURE_UNIT "TempUnit"
+#define D_TIME "Time"
+#define D_TO "a"
+#define D_TODAY "Today"
+#define D_TOGGLE "Toggle"
+#define D_TOPIC "Topic"
+#define D_TOTAL "Total"
+#define D_TRANSMIT "Trasmesso"
+#define D_TRUE "True"
+#define D_TYPE "Type"
+#define D_UNKNOWN "Unknown"
+#define D_UPGRADE "aggiornamento"
+#define D_UPLOAD "Invio"
+#define D_UPTIME "Uptime"
+#define D_USER "Utente"
+#define D_UTC_TIME "UTC"
+#define D_UV_LEVEL "UV Level"
+#define D_VCC "Vcc"
+#define D_VERSION "Version"
+#define D_VOLTAGE "Voltage"
+#define D_WARMLIGHT "Calda"
+#define D_WEB "Web"                  // Web log
+#define D_WEB_SERVER "Web Server"
+#define D_WIFI "Wifi"
+#define D_WRONG "Wrong"
+#define D_YESTERDAY "Yesterday"
+
+// settings.ino
+#define D_SAVED_TO_FLASH_AT "Salvato nella flash in"
+#define D_LOADED_FROM_FLASH_AT "Caricato dalla flash da"
+#define D_USE_DEFAULTS "Utilizzo valori default"
+#define D_ERASED_SECTOR "Settore cancellato"
+
+// sonoff.ino
+#define D_LEVEL_10 "level 1-0"
+#define D_LEVEL_01 "level 0-1"
+#define D_SERIAL_LOGGING_DISABLED "Log seriale disabilitato"
+#define D_SYSLOG_LOGGING_REENABLED "Syslog ri-abilitato"
+
+#define D_SET_BAUDRATE_TO "Baudrate impostato a"
+#define D_RECEIVED_TOPIC "Topic Ricevuto"
+#define D_DATA_SIZE "Dimensione Dati"
+#define D_ANALOG_INPUT "Analogico"
+
+#define D_FINGERPRINT "Verifica TLS fingerprint..."
+#define D_TLS_CONNECT_FAILED_TO "Connessione TLS fallita a"
+#define D_RETRY_IN "Nuovo tentativo in"
+#define D_VERIFIED "Verificato"
+#define D_INSECURE "Connessione insicura a causa di Fingerprint non valido"
+#define D_CONNECT_FAILED_TO "Connessione Fallita a"
+
+// support.ino
+#define D_OSWATCH "osWatch"
+#define D_BLOCKED_LOOP "Ciclo Bloccato"
+#define D_WPS_FAILED_WITH_STATUS "WPSconfig Fallito con stato"
+#define D_ACTIVE_FOR_3_MINUTES "attivo per 3 minuti"
+#define D_FAILED_TO_START "partenza fallita"
+#define D_PATCH_ISSUE_2186 "Patch issue 2186"
+#define D_CONNECTING_TO_AP "Connessione ad AP"
+#define D_IN_MODE "in modalita'"
+#define D_CONNECT_FAILED_NO_IP_ADDRESS "Connessione fallita, indirizzo IP non ricevuto"
+#define D_CONNECT_FAILED_AP_NOT_REACHED "Connessione fallita, AP non raggiungibile"
+#define D_CONNECT_FAILED_WRONG_PASSWORD "Connessione fallita, password AP non corretta"
+#define D_CONNECT_FAILED_AP_TIMEOUT "Connessione fallita, timeout AP"
+#define D_ATTEMPTING_CONNECTION "Tentativo di connessione..."
+#define D_CHECKING_CONNECTION "Controllo connessione..."
+#define D_QUERY_DONE "Query eseguita. Servizio MQTT trovato"
+#define D_MQTT_SERVICE_FOUND "Servizio MQTT trovato su"
+#define D_I2CSCAN_DEVICES_FOUND_AT "Dispositivo/i trovato a"
+#define D_FOUND_AT "trovato a"
+#define D_I2CSCAN_UNKNOWN_ERROR_AT "Errore sconosciuto a"
+#define D_I2CSCAN_NO_DEVICES_FOUND "Nessun dispositivo trovato"
+#define D_SYSLOG_HOST_NOT_FOUND "Syslog Host non trovato"
+
+// webserver.ino
+#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware - effettuare aggiornamento"
+#define D_WEBSERVER_ACTIVE_ON "Web server attivo su"
+#define D_WITH_IP_ADDRESS "con indirizzo IP"
+#define D_WEBSERVER_STOPPED "Web server arrestato"
+#define D_FILE_NOT_FOUND "File Non Trovato"
+#define D_REDIRECTED "Redirezione al captive portal"
+#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Impostazione Wifimanager come AccessPoint e Station"
+#define D_WIFIMANAGER_SET_ACCESSPOINT "Impostazione Wifimanager come AccessPoint"
+#define D_TRYING_TO_CONNECT "Tentativo di connessione del dispositivo alla rete"
+
+#define D_RESTART_IN "Riavvio in"
+#define D_SECONDS "secondi"
+#define D_DEVICE_WILL_RESTART "Il dispositivo verra' riavviato tra pochi secondi"
+#define D_BUTTON_TOGGLE "On/Off"
+#define D_CONFIGURATION "Configurazione"
+#define D_INFORMATION "Informazioni"
+#define D_FIRMWARE_UPGRADE "Aggiornamento Firmware"
+#define D_CONSOLE "Console"
+#define D_CONFIRM_RESTART "Conferma Riavvio"
+
+#define D_CONFIGURE_MODULE "Configurazione Modulo"
+#define D_CONFIGURE_WIFI "Configurazione WiFi"
+#define D_CONFIGURE_MQTT "Configurazione MQTT"
+#define D_CONFIGURE_DOMOTICZ "Configurazione Domoticz"
+#define D_CONFIGURE_LOGGING "Configurazione Logging"
+#define D_CONFIGURE_OTHER "Configurazione Extra"
+#define D_CONFIRM_RESET_CONFIGURATION "Conferma Reset Configurazione"
+#define D_RESET_CONFIGURATION "Reset Configurazione"
+#define D_BACKUP_CONFIGURATION "Backup Configurazione"
+#define D_RESTORE_CONFIGURATION "Ripristino Configurazione"
+#define D_MAIN_MENU "Menu' Principale"
+
+#define D_MODULE_PARAMETERS "Parametri del modulo"
+#define D_MODULE_TYPE "Tipo modulo"
+#define D_GPIO "GPIO"
+#define D_SERIAL_IN "Serial In"
+#define D_SERIAL_OUT "Serial Out"
+
+#define D_WIFI_PARAMETERS "Parametri Wifi"
+#define D_SCAN_FOR_WIFI_NETWORKS "Scansione delle reti wifi"
+#define D_SCAN_DONE "Scansione effettuata"
+#define D_NO_NETWORKS_FOUND "Nessuna rete trovata"
+#define D_REFRESH_TO_SCAN_AGAIN "Ricarica per nuova scansione"
+#define D_DUPLICATE_ACCESSPOINT "AccessPoint duplicato"
+#define D_SKIPPING_LOW_QUALITY "Ignorato a causa di bassa qualita'"
+#define D_RSSI "RSSI"
+#define D_WEP "WEP"
+#define D_WPA_PSK "WPA PSK"
+#define D_WPA2_PSK "WPA2 PSK"
+#define D_AP1_SSID "AP1 SSId"
+#define D_AP1_PASSWORD "AP1 Password"
+#define D_AP2_SSID "AP2 SSId"
+#define D_AP2_PASSWORD "AP2 Password"
+
+#define D_MQTT_PARAMETERS "Parametri MQTT"
+#define D_CLIENT "Client"
+#define D_FULL_TOPIC "Full Topic"
+
+#define D_LOGGING_PARAMETERS "Parametri Logging"
+#define D_LOG_LEVEL "livello di log"
+#define D_MORE_DEBUG "Debug aggiuntivo"
+#define D_SYSLOG_HOST "Syslog host"
+#define D_SYSLOG_PORT "Syslog porta"
+#define D_TELEMETRY_PERIOD "Periodo Telemetria"
+
+#define D_OTHER_PARAMETERS "Altri parametri"
+#define D_WEB_ADMIN_PASSWORD "Password Amministratore Web"
+#define D_MQTT_ENABLE "Abilita MQTT"
+#define D_FRIENDLY_NAME "Nome confidenziale"
+#define D_BELKIN_WEMO "Belkin WeMo"
+#define D_HUE_BRIDGE "Hue Bridge"
+#define D_SINGLE_DEVICE "dispositivo singolo"
+#define D_MULTI_DEVICE "dispositivo multiplo"
+
+#define D_SAVE_CONFIGURATION "Salva configurazione"
+#define D_CONFIGURATION_SAVED "Configurazione salvata"
+#define D_CONFIGURATION_RESET "Configurazione azzerata"
+
+#define D_PROGRAM_VERSION "Versione del programma"
+#define D_BUILD_DATE_AND_TIME "Data e ora compilazione"
+#define D_CORE_AND_SDK_VERSION "Versione Core/SDK"
+#define D_FLASH_WRITE_COUNT "Contatore scrittura Flash"
+#define D_MAC_ADDRESS "Indirizzo MAC"
+#define D_MQTT_HOST "MQTT Host"
+#define D_MQTT_PORT "MQTT Porta"
+#define D_MQTT_CLIENT "MQTT Client"
+#define D_MQTT_USER "MQTT Utente"
+#define D_MQTT_TOPIC "MQTT Topic"
+#define D_MQTT_GROUP_TOPIC "MQTT Group Topic"
+#define D_MQTT_FULL_TOPIC "MQTT Full Topic"
+#define D_MDNS_DISCOVERY "mDNS Discovery"
+#define D_MDNS_ADVERTISE "mDNS Advertise"
+#define D_ESP_CHIP_ID "ESP Chip Id"
+#define D_FLASH_CHIP_ID "Flash Chip Id"
+#define D_FLASH_CHIP_SIZE "Dimensione Flash"
+#define D_FREE_PROGRAM_SPACE "Spazio Libero Memoria Programma"
+
+#define D_UPGRADE_BY_WEBSERVER "Aggiornamento da web server"
+#define D_OTA_URL "OTA Url"
+#define D_START_UPGRADE "Avvio aggiornamento"
+#define D_UPGRADE_BY_FILE_UPLOAD "Aggiornamento tramite invio file"
+#define D_UPLOAD_STARTED "Invio iniziato"
+#define D_UPGRADE_STARTED "Aggiornamento avviato"
+#define D_UPLOAD_DONE "Invio effettuato"
+#define D_UPLOAD_ERR_1 "Nessun file selezionato"
+#define D_UPLOAD_ERR_2 "Spazio insufficiente"
+#define D_UPLOAD_ERR_3 "Magic byte non corrispondente a 0xE9"
+#define D_UPLOAD_ERR_4 "Dimensione della memoria programma maggiore della dimensione reale della flash"
+#define D_UPLOAD_ERR_5 "Errore di comparazione del buffer di invio"
+#define D_UPLOAD_ERR_6 "Invio fallito. Abilitare logging 3"
+#define D_UPLOAD_ERR_7 "Invio annullato"
+#define D_UPLOAD_ERR_8 "File non valido"
+#define D_UPLOAD_ERR_9 "File troppo grande"
+#define D_UPLOAD_ERROR_CODE "Codice errore invio"
+
+#define D_ENTER_COMMAND "Inserire comando"
+#define D_ENABLE_WEBLOG_FOR_RESPONSE "Abilitare weblog 2 se e' attesa una risposta"
+#define D_NEED_USER_AND_PASSWORD "Richiesto user=<username>&password=<password>"
+
+// xdrv_domoticz.ino
+#define D_DOMOTICZ_PARAMETERS "Parametri Domoticz"
+#define D_DOMOTICZ_IDX "Idx"
+#define D_DOMOTICZ_KEY_IDX "Key idx"
+#define D_DOMOTICZ_SWITCH_IDX "Switch idx"
+#define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
+  #define D_DOMOTICZ_TEMP "Temp"
+  #define D_DOMOTICZ_TEMP_HUM "Temp,Hum"
+  #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
+  #define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
+  #define D_DOMOTICZ_ILLUMINANCE "Illuminance"
+  #define D_DOMOTICZ_COUNT "Count"
+  #define D_DOMOTICZ_VOLTAGE "Voltage"
+  #define D_DOMOTICZ_CURRENT "Current"
+  #define D_DOMOTICZ_AIRQUALITY "AirQuality"
+#define D_DOMOTICZ_UPDATE_TIMER "Intervallo di aggiornamento"
+
+// xdrv_irremote.ino
+#define D_INVALID_JSON "JSON non valido"
+#define D_PROTOCOL_NOT_SUPPORTED "Protocollo non supportato"
+#define D_IR_PROTOCOL "PROTOCOL"
+#define D_IR_BITS "BITS"
+#define D_IR_DATA "DATA"
+#define D_IRHVAC_VENDOR "VENDOR"
+#define D_IRHVAC_POWER "POWER"
+#define D_IRHVAC_MODE "MODE"
+#define D_IRHVAC_FANSPEED "FANSPEED"
+#define D_IRHVAC_TEMP "TEMP"
+#define D_IRRECEIVED "IrReceived"
+
+// xdrv_snfbridge.ino
+#define D_RFRECEIVED "RfReceived"
+#define D_START_LEARNING "Avvio apprendimento"
+#define D_SET_TO_DEFAULT "Imposta al default"
+#define D_DEFAULT_SENT "Default inviato"
+#define D_LEARNED_SENT "Apprendimento inviato"
+#define D_LEARNING_ACTIVE "Apprendimento attivo"
+#define D_LEARN_FAILED "Apprendimento fallito"
+#define D_LEARNED "Appreso"
+#define D_SAVED "Salvato"
+
+// xdrv_wemohue.ino
+#define D_MULTICAST_DISABLED "Multicast disabilitato"
+#define D_MULTICAST_REJOINED "Multicast (ri)associato"
+#define D_MULTICAST_JOIN_FAILED "Associazione Multicast fallita"
+#define D_FAILED_TO_SEND_RESPONSE "Invio risposta fallito"
+
+#define D_WEMO "WeMo"
+#define D_WEMO_BASIC_EVENT "WeMo evento base"
+#define D_WEMO_EVENT_SERVICE "WeMo servizio eventi"
+#define D_WEMO_SETUP "Impostazione WeMo"
+#define D_RESPONSE_SENT "Risposta inviata"
+
+#define D_HUE "Hue"
+#define D_HUE_BRIDGE_SETUP "Impostazione Hue"
+#define D_HUE_API_NOT_IMPLEMENTED "Hue API non implementata"
+#define D_HUE_API "Hue API"
+#define D_HUE_POST_ARGS "Hue POST argomenti"
+#define D_3_RESPONSE_PACKETS_SENT "3 pacchetti di risposta inviati"
+
+// xsns_03_energy.ino
+#define D_MAXPOWERREACHED "MaxPowerReached"
+#define D_MAXPOWERREACHEDRETRY "MaxPowerReachedRetry"
+#define D_POWERMONITOR "PowerMonitor"
+#define D_ENERGYMONITOR "EnergyMonitor"
+#define D_MAXENERGYREACHED "MaxEnergyReached"
+#define D_ENERGY_TODAY "Energia Oggi"
+#define D_ENERGY_YESTERDAY "Energia Ieri"
+#define D_ENERGY_TOTAL "Energia Totale"
+
+// xsns_05_ds18b20.ino
+#define D_SENSOR_BUSY "Sensore occupato"
+#define D_SENSOR_CRC_ERROR "Sensore errore CRC"
+#define D_SENSORS_FOUND "Sensori trovati"
+
+// xsns_06_dht.ino
+#define D_TIMEOUT_WAITING_FOR "Attesa timeout per"
+#define D_START_SIGNAL_LOW "inizio segnale basso"
+#define D_START_SIGNAL_HIGH "inizio segnale alto"
+#define D_PULSE "impulso"
+#define D_CHECKSUM_FAILURE "Checksum fallito"
+
+// xsns_07_sht1x.ino
+#define D_SENSOR_DID_NOT_ACK_COMMAND "Sensore non ha eseguito il comando ACK"
+#define D_SHT1X_FOUND "SHT1X trovato"
+
+// sonoff_template.h
+// Max string length is 8 characters including suffixes
+#define D_SENSOR_NONE     "None"
+#define D_SENSOR_DHT11    "DHT11"
+#define D_SENSOR_AM2301   "AM2301"
+#define D_SENSOR_SI7021   "SI7021"
+#define D_SENSOR_DS18X20  "DS18x20"
+#define D_SENSOR_I2C_SCL  "I2C SCL"
+#define D_SENSOR_I2C_SDA  "I2C SDA"
+#define D_SENSOR_WS2812   "WS2812"
+#define D_SENSOR_IRSEND   "IRsend"
+#define D_SENSOR_SWITCH   "Switch"   // Suffix "1"
+#define D_SENSOR_BUTTON   "Button"   // Suffix "1"
+#define D_SENSOR_RELAY    "Relay"    // Suffix "1i"
+#define D_SENSOR_LED      "Led"      // Suffix "1i"
+#define D_SENSOR_PWM      "PWM"      // Suffix "1"
+#define D_SENSOR_COUNTER  "Counter"  // Suffix "1"
+#define D_SENSOR_IRRECV   "IRrecv"
+#define D_SENSOR_MHZ_RX   "MHZ Rx"
+#define D_SENSOR_MHZ_TX   "MHZ Tx"
+#define D_SENSOR_PZEM_RX  "PZEM Rx"
+#define D_SENSOR_PZEM_TX  "PZEM Tx"
+#define D_SENSOR_SAIR_RX  "SAir Rx"
+#define D_SENSOR_SAIR_TX  "SAir Tx"
+#define D_SENSOR_SPI_CS   "SPI CS"
+#define D_SENSOR_SPI_DC   "SPI DC"
+#define D_SENSOR_BACKLIGHT "BLight"
+
+// Units
+#define D_UNIT_AMPERE "A"
+#define D_UNIT_HOUR "Hr"
+#define D_UNIT_KILOOHM "kOhm"
+#define D_UNIT_KILOWATTHOUR "kWh"
+#define D_UNIT_LUX "lx"
+#define D_UNIT_MICROSECOND "us"
+#define D_UNIT_MILLIAMPERE "mA"
+#define D_UNIT_MILLISECOND "ms"
+#define D_UNIT_MINUTE "Min"
+#define D_UNIT_PPM "ppm"
+#define D_UNIT_PRESSURE "hPa"
+#define D_UNIT_SECOND "sec"
+#define D_UNIT_SECTORS "settori"
+#define D_UNIT_VOLT "V"
+#define D_UNIT_WATT "W"
+#define D_UNIT_WATTHOUR "Wh"
+
+// Log message prefix
+#define D_LOG_APPLICATION "APP: "  // Application
+#define D_LOG_BRIDGE "BRG: "       // Bridge
+#define D_LOG_CONFIG "CFG: "       // Settings
+#define D_LOG_COMMAND "CMD: "      // Command
+#define D_LOG_DEBUG "DBG: "        // Debug
+#define D_LOG_DHT "DHT: "          // DHT sensor
+#define D_LOG_DOMOTICZ "DOM: "     // Domoticz
+#define D_LOG_DSB "DSB: "          // DS18xB20 sensor
+#define D_LOG_HTTP "HTP: "         // HTTP webserver
+#define D_LOG_I2C "I2C: "          // I2C
+#define D_LOG_IRR "IRR: "          // Infra Red Received
+#define D_LOG_LOG "LOG: "          // Logging
+#define D_LOG_MODULE "MOD: "       // Module
+#define D_LOG_MDNS "DNS: "         // mDNS
+#define D_LOG_MQTT "MQT: "         // MQTT
+#define D_LOG_OTHER "OTH: "        // Other
+#define D_LOG_RESULT "RSL: "       // Result
+#define D_LOG_RFR "RFR: "          // RF Received
+#define D_LOG_SERIAL "SER: "       // Serial
+#define D_LOG_SHT1 "SHT: "         // SHT1x sensor
+#define D_LOG_UPLOAD "UPL: "       // Upload
+#define D_LOG_UPNP "UPP: "         // UPnP
+#define D_LOG_WIFI "WIF: "         // Wifi
+
+// Result
+#define D_RSLT_RESULT "RESULT"
+#define D_RSLT_INFO "INFO"
+#define D_RSLT_STATE "STATE"
+#define D_RSLT_SENSOR "SENSOR"
+#define D_RSLT_UPTIME "UPTIME"
+#define D_RSLT_MARGINS "MARGINS"
+#define D_RSLT_WARNING "WARNING"
+#define D_RSLT_ENERGY "ENERGY"
+
+// Commands
+#define D_CMND_MQTTHOST "MqttHost"
+#define D_CMND_MQTTPORT "MqttPort"
+#define D_CMND_MQTTRETRY "MqttRetry"
+#define D_CMND_STATETEXT "StateText"
+#define D_CMND_MQTTFINGERPRINT "MqttFingerprint"
+#define D_CMND_MQTTCLIENT "MqttClient"
+#define D_CMND_MQTTUSER "MqttUser"
+#define D_CMND_MQTTPASSWORD "MqttPassword"
+#define D_CMND_FULLTOPIC "FullTopic"
+#define D_CMND_PREFIX "Prefix"
+  #define PRFX_MAX_STRING_LENGTH 5
+  #define D_CMND "cmnd"
+  #define D_STAT "stat"
+  #define D_TELE "tele"
+#define D_CMND_GROUPTOPIC "GroupTopic"
+#define D_CMND_TOPIC "Topic"
+#define D_CMND_BUTTONTOPIC "ButtonTopic"
+#define D_CMND_SWITCHTOPIC "SwitchTopic"
+#define D_CMND_BUTTONRETAIN "ButtonRetain"
+#define D_CMND_SWITCHRETAIN "SwitchRetain"
+#define D_CMND_POWERRETAIN "PowerRetain"
+#define D_CMND_SENSORRETAIN "SensorRetain"
+#define D_CMND_BACKLOG "Backlog"
+#define D_CMND_DELAY "Delay"
+#define D_CMND_STATUS "Status"
+  #define D_STATUS1_PARAMETER "PRM"
+  #define D_STATUS2_FIRMWARE "FWR"
+  #define D_STATUS3_LOGGING "LOG"
+  #define D_STATUS4_MEMORY "MEM"
+  #define D_STATUS5_NETWORK "NET"
+  #define D_STATUS6_MQTT "MQT"
+  #define D_STATUS7_TIME "TIM"
+  #define D_STATUS8_POWER "PWR"
+  #define D_STATUS9_MARGIN "PTH"
+  #define D_STATUS10_SENSOR "SNS"
+  #define D_STATUS11_STATUS "STS"
+#define D_CMND_POWER "Power"
+  #define D_RSLT_POWER "POWER"
+#define D_CMND_POWERONSTATE "PowerOnState"
+#define D_CMND_PULSETIME "PulseTime"
+#define D_CMND_BLINKTIME "BlinkTime"
+#define D_CMND_BLINKCOUNT "BlinkCount"
+#define D_CMND_SAVEDATA "SaveData"
+#define D_CMND_SETOPTION "SetOption"
+#define D_CMND_TEMPERATURE_RESOLUTION "TempRes"
+#define D_CMND_HUMIDITY_RESOLUTION "HumRes"
+#define D_CMND_PRESSURE_RESOLUTION "PressRes"
+#define D_CMND_POWER_RESOLUTION "WattRes"
+#define D_CMND_VOLTAGE_RESOLUTION "VoltRes"
+#define D_CMND_CURRENT_RESOLUTION "AmpRes"
+#define D_CMND_ENERGY_RESOLUTION "EnergyRes"
+#define D_CMND_MODULE "Module"
+#define D_CMND_MODULES "Modules"
+#define D_CMND_GPIO "GPIO"
+  #define D_NOT_SUPPORTED "Not supported"
+#define D_CMND_GPIOS "GPIOs"
+#define D_CMND_PWM "PWM"
+#define D_CMND_PWMFREQUENCY "PWMFrequency"
+#define D_CMND_PWMRANGE "PWMRange"
+#define D_CMND_COUNTER "Counter"
+#define D_CMND_COUNTERTYPE "CounterType"
+#define D_CMND_COUNTERDEBOUNCE "CounterDebounce"
+#define D_CMND_SLEEP "Sleep"
+#define D_CMND_UPLOAD "Upload"
+#define D_CMND_UPGRADE "Upgrade"
+  #define D_ONE_OR_GT "1 or >%s to upgrade"
+#define D_CMND_OTAURL "OtaUrl"
+#define D_CMND_SERIALLOG "SerialLog"
+#define D_CMND_SYSLOG "SysLog"
+#define D_CMND_LOGHOST "LogHost"
+#define D_CMND_LOGPORT "LogPort"
+#define D_CMND_IPADDRESS "IPAddress"
+#define D_CMND_NTPSERVER "NtpServer"
+#define D_CMND_AP "Ap"
+#define D_CMND_SSID "SSId"
+#define D_CMND_PASSWORD "Password"
+#define D_CMND_HOSTNAME "Hostname"
+#define D_CMND_WIFICONFIG "WifiConfig"
+  #define WCFG_MAX_STRING_LENGTH 12
+  #define D_WCFG_0_RESTART "Restart"
+  #define D_WCFG_1_SMARTCONFIG "SmartConfig"
+  #define D_WCFG_2_WIFIMANAGER "WifiManager"
+  #define D_WCFG_3_WPSCONFIG "WPSConfig"
+  #define D_WCFG_4_RETRY "Retry"
+  #define D_WCFG_5_WAIT "Wait"
+#define D_CMND_FRIENDLYNAME "FriendlyName"
+#define D_CMND_SWITCHMODE "SwitchMode"
+#define D_CMND_WEBSERVER "Webserver"
+  #define D_WEBSERVER_MODE "WebServerMode"
+  #define D_ACTIVE_FOR "Active for"
+  #define D_ON_DEVICE "on"
+#define D_CMND_WEBPASSWORD "WebPassword"
+#define D_CMND_WEBLOG "WebLog"
+#define D_CMND_EMULATION "Emulation"
+#define D_CMND_TELEPERIOD "TelePeriod"
+#define D_CMND_RESTART "Restart"
+  #define D_ONE_TO_RESTART "1 to restart"
+#define D_CMND_RESET "Reset"
+  #define D_RESET_AND_RESTARTING "Reset and Restarting"
+  #define D_ONE_TO_RESET "1 to reset"
+#define D_CMND_TIMEZONE "Timezone"
+#define D_CMND_ALTITUDE "Altitude"
+#define D_CMND_LEDPOWER "LedPower"
+#define D_CMND_LEDSTATE "LedState"
+#define D_CMND_CFGDUMP "CfgDump"
+#define D_CMND_I2CSCAN "I2CScan"
+#define D_CMND_INA219MODE "Ina219Mode"
+#define D_CMND_EXCEPTION "Exception"
+
+// Commands xdrv_domoticz.ino
+#define D_CMND_DOMOTICZ "Domoticz"
+#define D_CMND_IDX "Idx"
+#define D_CMND_KEYIDX "KeyIdx"
+#define D_CMND_SWITCHIDX "SwitchIdx"
+#define D_CMND_SENSORIDX "SensorIdx"
+#define D_CMND_UPDATETIMER "UpdateTimer"
+
+// Commands xdrv_irremote.ino
+#define D_CMND_IRSEND "IRSend"
+#define D_CMND_IRHVAC "IRHVAC"
+
+// Commands xdrv_light.ino
+#define D_CMND_COLOR "Color"
+#define D_CMND_COLORTEMPERATURE "CT"
+#define D_CMND_DIMMER "Dimmer"
+#define D_CMND_LED "Led"
+#define D_CMND_LEDTABLE "LedTable"
+#define D_CMND_FADE "Fade"
+#define D_CMND_PIXELS "Pixels"
+#define D_CMND_SCHEME "Scheme"
+#define D_CMND_SPEED "Speed"
+#define D_CMND_WAKEUP "Wakeup"
+#define D_CMND_WAKEUPDURATION "WakeUpDuration"
+#define D_CMND_WIDTH "Width"
+
+// Commands xdrv_snfbridge.ino
+#define D_CMND_RFCODE "RfCode"
+#define D_CMND_RFHIGH "RfHigh"
+#define D_CMND_RFHOST "RfHost"
+#define D_CMND_RFKEY "RfKey"
+#define D_CMND_RFLOW "RfLow"
+#define D_CMND_RFSYNC "RfSync"
+
+// Commands xsns_03_energy.ino
+#define D_CMND_POWERLOW "PowerLow"
+#define D_CMND_POWERHIGH "PowerHigh"
+#define D_CMND_VOLTAGELOW "VoltageLow"
+#define D_CMND_VOLTAGEHIGH "VoltageHigh"
+#define D_CMND_CURRENTLOW "CurrentLow"
+#define D_CMND_CURRENTHIGH "CurrentHigh"
+#define D_CMND_ENERGYRESET "EnergyReset"
+#define D_CMND_HLWPCAL "HlwPcal"
+#define D_CMND_HLWPSET "HlwPset"
+#define D_CMND_HLWUCAL "HlwUcal"
+#define D_CMND_HLWUSET "HlwUset"
+#define D_CMND_HLWICAL "HlwIcal"
+#define D_CMND_HLWISET "HlwIset"
+#define D_CMND_MAXPOWER "MaxPower"
+#define D_CMND_MAXPOWERHOLD "MaxPowerHold"
+#define D_CMND_MAXPOWERWINDOW "MaxPowerWindow"
+#define D_CMND_SAFEPOWER "SafePower"
+#define D_CMND_SAFEPOWERHOLD "SafePowerHold"
+#define D_CMND_SAFEPOWERWINDOW "SafePowerWindow"
+#define D_CMND_MAXENERGY "MaxEnergy"
+#define D_CMND_MAXENERGYSTART "MaxEnergyStart"
+
+#endif  // _LANGUAGE_EN_GB_H_
--- a/sonoff/settings.ino
+++ b/sonoff/settings.ino
@ -18,7 +18,11 @@
 */

 #ifndef DOMOTICZ_UPDATE_TIMER
-#define DOMOTICZ_UPDATE_TIMER  0               // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional)
+#define DOMOTICZ_UPDATE_TIMER  0            // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional)
+#endif
+
+#ifndef EMULATION
+#define EMULATION              EMUL_NONE    // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
 #endif

 /*********************************************************************************************\
--- a/sonoff/sonoff.ino
+++ b/sonoff/sonoff.ino
@ -25,8 +25,8 @@
    - Select IDE Tools - Flash Size: "1M (no SPIFFS)"
  ====================================================*/

-#define VERSION                0x050A0004
-#define VERSION_STRING         "5.10.0d"    // Would be great to have a macro that fills this from VERSION ...
+#define VERSION                0x050A0005
+#define VERSION_STRING         "5.10.0e"    // Would be great to have a macro that fills this from VERSION ...

 // Location specific includes
 #include "sonoff.h"                         // Enumaration used in user_config.h
--- a/sonoff/user_config.h
+++ b/sonoff/user_config.h
@ -33,6 +33,7 @@
 //#define MY_LANGUAGE            nl-NL           // Dutch in the Netherlands
 //#define MY_LANGUAGE            de-DE           // German in Germany
 //#define MY_LANGUAGE            pl-PL           // Polish in Poland
+//#define MY_LANGUAGE            it-IT           // Italian in Italy

 // -- Project -------------------------------------
 #define PROJECT                "sonoff"          // PROJECT is used as the default topic delimiter and OTA file name
@ -122,7 +123,7 @@
  #define WEB_USERNAME         "admin"           // Web server Admin mode user name
  #define WEB_PASSWORD         ""                // [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)
  #define FRIENDLY_NAME        "Sonoff"          // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
-  #define USE_EMULATION                          // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+11k code, +2k mem)
+  #define USE_EMULATION                          // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
    #define EMULATION          EMUL_NONE         // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)

 // -- mDNS ----------------------------------------
--- a/sonoff/xdrv_wemohue.ino
+++ b/sonoff/xdrv_wemohue.ino
@ -241,6 +241,38 @@ void PollUdp()
 \*********************************************************************************************/

 const char WEMO_EVENTSERVICE_XML[] PROGMEM =
+/*
+  // Original
+  "<?scpd xmlns=\"urn:Belkin:service-1-0\"?>"
+  "<actionList>"
+    "<action>"
+      "<name>SetBinaryState</name>"
+      "<argumentList>"
+        "<argument>"
+          "<retval/>"
+          "<name>BinaryState</name>"
+          "<relatedStateVariable>BinaryState</relatedStateVariable>"
+          "<direction>in</direction>"
+        "</argument>"
+      "</argumentList>"
+      "<serviceStateTable>"
+        "<stateVariable sendEvents=\"yes\">"
+          "<name>BinaryState</name>"
+          "<dataType>Boolean</dataType>"
+          "<defaultValue>0</defaultValue>"
+        "</stateVariable>"
+        "<stateVariable sendEvents=\"yes\">"
+          "<name>level</name>"
+          "<dataType>string</dataType>"
+          "<defaultValue>0</defaultValue>"
+        "</stateVariable>"
+      "</serviceStateTable>"
+    "</action>"
+  "</scpd>\r\n"
+  "\r\n";
+*/
+
+/*
  // XosePerez version 20171108 - v2.3.0
  "<?xml version=\"1.0\"?>"
  "<scpd xmlns=\"urn:Belkin:service-1-0\">"
@ -277,19 +309,63 @@ const char WEMO_EVENTSERVICE_XML[] PROGMEM =
      "</stateVariable>"
    "</serviceStateTable>"
  "</scpd>";
+*/
+
+  // Reloxx13 from #1357
+  "<?scpd xmlns=\"urn:Belkin:service-1-0\"?>"
+    "<actionList>"
+      "<action>"
+        "<name>SetBinaryState</name>"
+        "<argumentList>"
+          "<argument>"
+            "<retval/>"
+            "<name>BinaryState</name>"
+            "<relatedStateVariable>BinaryState</relatedStateVariable>"
+            "<direction>in</direction>"
+          "</argument>"
+        "</argumentList>"
+        "<serviceStateTable>"
+          "<stateVariable sendEvents=\"yes\">"
+            "<name>BinaryState</name>"
+            "<dataType>Boolean</dataType>"
+            "<defaultValue>0</defaultValue>"
+          "</stateVariable>"
+          "<stateVariable sendEvents=\"yes\">"
+            "<name>level</name>"
+            "<dataType>string</dataType>"
+            "<defaultValue>0</defaultValue>"
+          "</stateVariable>"
+        "</serviceStateTable>"
+      "</action>"
+      "<action>"
+        "<name>GetBinaryState</name>"
+        "<argumentList>"
+          "<argument>"
+            "<retval/>"
+            "<name>BinaryState</name>"
+            "<relatedStateVariable>BinaryState</relatedStateVariable>"
+            "<direction>out</direction>"
+          "</argument>"
+        "</argumentList>"
+      "</action>"
+    "</actionList>"
+  "</scpd>\r\n"
+  "\r\n";

 const char WEMO_RESPONSE_STATE_SOAP[] PROGMEM =
-  "<s:Envelope xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\">"
+  // Reloxx13 from #1357
+  "<s:Envelope xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\" s:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\">"
    "<s:Body>"
-      "<u:SetBinaryState xmlns:u=\"urn:Belkin:service:basicevent:1\">"
+      "<u:SetBinaryStateResponse xmlns:u=\"urn:Belkin:service:basicevent:1\">"
        "<BinaryState>{x1</BinaryState>"
-      "</u:SetBinaryState>"
+      "</u:SetBinaryStateResponse>"
    "</s:Body>"
-  "</s:Envelope>";
+  "</s:Envelope>\r\n"
+  "\r\n";

 const char WEMO_SETUP_XML[] PROGMEM =
  "<?xml version=\"1.0\"?>"
-  "<root>"
+  "<root xmlns=\"urn:Belkin:device-1-0\">"
    "<device>"
      "<deviceType>urn:Belkin:device:controllee:1</deviceType>"
      "<friendlyName>{x1</friendlyName>"
@ -316,6 +392,7 @@ const char WEMO_SETUP_XML[] PROGMEM =
 void HandleUpnpEvent()
 {
  AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, PSTR(D_WEMO_BASIC_EVENT));
+
  String request = WebServer->arg(0);
  String state_xml = FPSTR(WEMO_RESPONSE_STATE_SOAP);
  //differentiate get and set state
@ -328,7 +405,7 @@ void HandleUpnpEvent()
    }
  }
  else if(request.indexOf(F("GetBinaryState")) > 0){
-    state_xml.replace(F("SetBinaryState"), F("GetBinaryStateResponse"));
+    state_xml.replace(F("Set"), F("Get"));
  }
  state_xml.replace("{x1", String(bitRead(power, devices_present -1)));
  WebServer->send(200, FPSTR(HDR_CTYPE_XML), state_xml);
@ -337,6 +414,7 @@ void HandleUpnpEvent()
 void HandleUpnpService()
 {
  AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, PSTR(D_WEMO_EVENT_SERVICE));
+
  WebServer->send(200, FPSTR(HDR_CTYPE_PLAIN), FPSTR(WEMO_EVENTSERVICE_XML));
 }