mirror of https://github.com/arendst/Tasmota.git
Fix AXP192 register
- Fix AXP192 register use - Add more delay to fix intermittent FT5206 init failure
This commit is contained in:
parent
72b18eff4c
commit
238013ba90
|
@ -52,7 +52,7 @@ class AXP192_M5Stack_Core2 : AXP192
|
||||||
# Automatic shutdown function setting when the key duration is longer than the shutdown duration = turn on
|
# Automatic shutdown function setting when the key duration is longer than the shutdown duration = turn on
|
||||||
# PWROK signal delay after power on = 64ms
|
# PWROK signal delay after power on = 64ms
|
||||||
# Shutdown duration setting = 4s
|
# Shutdown duration setting = 4s
|
||||||
self.write8(0x34, 0x4C)
|
self.write8(0x36, 0x4C)
|
||||||
|
|
||||||
# ADC all-on
|
# ADC all-on
|
||||||
# Bit 7: Battery voltage ADC enable
|
# Bit 7: Battery voltage ADC enable
|
||||||
|
@ -69,10 +69,17 @@ class AXP192_M5Stack_Core2 : AXP192
|
||||||
self.set_lcd_reset(false)
|
self.set_lcd_reset(false)
|
||||||
tasmota.delay(100) # wait for 100ms
|
tasmota.delay(100) # wait for 100ms
|
||||||
self.set_lcd_reset(true)
|
self.set_lcd_reset(true)
|
||||||
tasmota.delay(100) # wait for 100ms
|
tasmota.delay(200) # wait for 200ms
|
||||||
|
|
||||||
# bus power mode_output
|
# Indicates whether the voltage of VBUS is higher than VHOLD when the external power supply VBUS is connected
|
||||||
|
if self.read8(0X00) & 0x08
|
||||||
|
self.write_bit(0x30, 7, true)
|
||||||
|
# if v-bus can use, disable M-Bus 5V output to input
|
||||||
|
self.set_buf_power_mode(true)
|
||||||
|
else
|
||||||
|
# if not, enable M-Bus 5V output
|
||||||
self.set_buf_power_mode(false)
|
self.set_buf_power_mode(false)
|
||||||
|
end
|
||||||
|
|
||||||
tasmota.add_driver(self)
|
tasmota.add_driver(self)
|
||||||
end
|
end
|
||||||
|
@ -113,7 +120,7 @@ class AXP192_M5Stack_Core2 : AXP192
|
||||||
self.write8(0x12, self.read8(0x12) & 0xBF) # set EXTEN to disable 5v boost
|
self.write8(0x12, self.read8(0x12) & 0xBF) # set EXTEN to disable 5v boost
|
||||||
self.write8(0x90, self.read8(0x90) & 0xF8 | 0x01) # set GPIO0 to float, using enternal pulldown resistor to enable supply from BUS_5VS
|
self.write8(0x90, self.read8(0x90) & 0xF8 | 0x01) # set GPIO0 to float, using enternal pulldown resistor to enable supply from BUS_5VS
|
||||||
else
|
else
|
||||||
self.write8(0x91, self.read8(0x91) & 0x0F | 0xF0)
|
self.write8(0x91, self.read8(0x91) & 0x0F | 0xF0) # Set GPIO to 3.3V (LDO OUTPUT mode)
|
||||||
self.write8(0x90, self.read8(0x90) & 0xF8 | 0x02) # set GPIO0 to LDO OUTPUT , pullup N_VBUSEN to disable supply from BUS_5V
|
self.write8(0x90, self.read8(0x90) & 0xF8 | 0x02) # set GPIO0 to LDO OUTPUT , pullup N_VBUSEN to disable supply from BUS_5V
|
||||||
self.write8(0x12, self.read8(0x12) | 0x40) # set EXTEN to enable 5v boost
|
self.write8(0x12, self.read8(0x12) | 0x40) # set EXTEN to enable 5v boost
|
||||||
end
|
end
|
||||||
|
|
Loading…
Reference in New Issue