Add command ``SetOption100 0/1``

Add command ``SetOption100 0/1`` to remove ``ZbReceived`` value from ``{"ZbReceived":{xxx:yyy}}`` JSON message

RELEASENOTES.md

@@ -70,6 +70,8 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add command ``SetOption94 0/1`` to select MAX31855 or MAX6675 thermocouple support (#8616)
 - Add command ``SetOption97 0/1`` to switch between Tuya serial speeds 9600 bps (0) or 115200 bps (1)
 - Add command ``SetOption98 0/1`` to provide rotary rule triggers (1) instead of controlling light (0)
+- Add command ``SetOption99 0/1`` to enable zero cross detection on PWM dimmer
+- Add command ``SetOption100 0/1`` to remove ``ZbReceived`` value from ``{"ZbReceived":{xxx:yyy}}`` JSON message
 - Add command ``Module2`` to configure fallback module on fast reboot (#8464)
 - Add commands ``LedPwmOn 0..255``, ``LedPwmOff 0..255`` and ``LedPwmMode1 0/1`` to control led brightness by George (#8491)
 - Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3``

tasmota/CHANGELOG.md

@@ -4,12 +4,14 @@
 
 - Remove Arduino ESP8266 Core support for versions before 2.7.1
 - Change to limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
+- Add command ``SetOption100 0/1`` to remove ``ZbReceived`` value from ``{"ZbReceived":{xxx:yyy}}`` JSON message
 
 ### 8.3.1.6 20200617
 
 - Add command ``Module2`` to configure fallback module on fast reboot (#8464)
 - Add command ``SetOption97 0/1`` to switch between Tuya serial speeds 9600 bps (0) or 115200 bps (1)
 - Add command ``SetOption98 0/1`` to provide rotary rule triggers (1) instead of controlling light (0)
+- Add command ``SetOption99 0/1`` to enable zero cross detection on PWM dimmer
 - Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers, need a adaptater. See dedicated full [blog](http://hallard.me/category/tinfo/) about French teleinformation stuff
 - Add library to be used for decoding Teleinfo (French Metering Smart Meter)
 - Add support for single wire LMT01 temperature Sensor by justifiably (#8713)

tasmota/settings.h

@@ -118,8 +118,8 @@ typedef union {                            // Restricted by MISRA-C Rule 18.4 bu
     uint32_t network_ethernet : 1;         // bit 14 (v8.3.1.3)  - CMND_ETHERNET
     uint32_t tuyamcu_baudrate : 1;         // bit 15 (v8.3.1.6)  - SetOption97 - Set Baud rate for TuyaMCU serial communication (0 = 9600 or 1 = 115200)
     uint32_t rotary_uses_rules : 1;        // bit 16 (v8.3.1.6)  - SetOption98 - Use rules instead of light control
-    uint32_t zerocross_dimmer : 1;         // bit 17 (v8.3.1.4)  = SetOption99 - Enable zerocross dimmer on PWM DIMMER
-    uint32_t spare18 : 1;
+    uint32_t zerocross_dimmer : 1;         // bit 17 (v8.3.1.4)  - SetOption99 - Enable zerocross dimmer on PWM DIMMER
+    uint32_t remove_zbreceived : 1;        // bit 18 (v8.3.1.7)  - SetOption100 - Remove ZbReceived form JSON message
     uint32_t spare19 : 1;
     uint32_t spare20 : 1;
     uint32_t spare21 : 1;

tasmota/xdrv_23_zigbee_2_devices.ino

@@ -102,7 +102,7 @@ typedef struct Z_Deferred {
   uint16_t              groupaddr;      // group address (if needed)
   uint16_t              cluster;        // cluster to use for the timer
   uint8_t               endpoint;       // endpoint to use for timer
-  uint8_t               category;       // which category of deferred is it 
+  uint8_t               category;       // which category of deferred is it
   uint32_t              value;          // any raw value to use for the timer
   Z_DeviceTimer         func;           // function to call when timer occurs
 } Z_Deferred;
@@ -213,7 +213,7 @@ public:
 private:
   std::vector<Z_Device*>    _devices = {};
   std::vector<Z_Deferred>   _deferred = {};   // list of deferred calls
-  uint32_t                  _saveTimer = 0;   
+  uint32_t                  _saveTimer = 0;
   uint8_t                   _seqNumber = 0;     // global seqNumber if device is unknown
 
   template < typename T>
@@ -738,7 +738,7 @@ bool Z_Devices::getHueState(uint16_t shortaddr,
 void Z_Devices::resetTimersForDevice(uint16_t shortaddr, uint16_t groupaddr, uint8_t category) {
   // iterate the list of deferred, and remove any linked to the shortaddr
   for (auto it = _deferred.begin(); it != _deferred.end(); it++) {
-    // Notice that the iterator is decremented after it is passed 
+    // Notice that the iterator is decremented after it is passed
 		// to erase() but before erase() is executed
     // see https://www.techiedelight.com/remove-elements-vector-inside-loop-cpp/
     if ((it->shortaddr == shortaddr) && (it->groupaddr == groupaddr)) {
@@ -937,9 +937,17 @@ void Z_Devices::jsonPublishFlush(uint16_t shortaddr) {
   zigbee_devices.jsonClear(shortaddr);
 
   if (use_fname) {
-    Response_P(PSTR("{\"" D_JSON_ZIGBEE_RECEIVED "\":{\"%s\":%s}}"), fname, msg.c_str());
+    if (Settings.flag4.remove_zbreceived) {
+      Response_P(PSTR("{\"%s\":%s}"), fname, msg.c_str());
+    } else {
+      Response_P(PSTR("{\"" D_JSON_ZIGBEE_RECEIVED "\":{\"%s\":%s}}"), fname, msg.c_str());
+    }
   } else {
-    Response_P(PSTR("{\"" D_JSON_ZIGBEE_RECEIVED "\":{\"0x%04X\":%s}}"), shortaddr, msg.c_str());
+    if (Settings.flag4.remove_zbreceived) {
+      Response_P(PSTR("{\"0x%04X\":%s}"), shortaddr, msg.c_str());
+    } else {
+      Response_P(PSTR("{\"" D_JSON_ZIGBEE_RECEIVED "\":{\"0x%04X\":%s}}"), shortaddr, msg.c_str());
+    }
   }
   if (Settings.flag4.zigbee_distinct_topics) {
     char subtopic[16];