mirror of https://github.com/arendst/Tasmota.git
new build variant ZigbeeBridge
This commit is contained in:
Jason2866
GitHub
parent
1709d5f73e
commit
246dcea2d1
|
|
@ -406,6 +406,264 @@
|
|||
#undef USE_DEBUG_DRIVER // Disable debug code
|
||||
#endif // FIRMWARE_IR
|
||||
|
||||
|
||||
/*********************************************************************************************\
|
||||
* [tasmota-zbbridge.bin]
|
||||
* Provide an image for the Sonoff Zigbee Bridge
|
||||
\*********************************************************************************************/
|
||||
|
||||
#ifdef FIRMWARE_ZBBRIDGE // *******************************************************************
|
||||
|
||||
#undef CODE_IMAGE_STR
|
||||
#define CODE_IMAGE_STR "zbbridge"
|
||||
|
||||
//#define USE_ARDUINO_OTA // Add optional support for Arduino OTA (+13k code)
|
||||
#define USE_DOMOTICZ // Enable Domoticz (+6k code, +0.3k mem)
|
||||
//#define USE_HOME_ASSISTANT // Enable Home Assistant Discovery Support (+7k code)
|
||||
|
||||
//#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
// #define USE_MQTT_TLS_CA_CERT // Force full CA validation instead of fingerprints, slower, but simpler to use (+2.2k code, +1.9k mem during connection handshake)
|
||||
// #define USE_MQTT_TLS_FORCE_EC_CIPHER // Force Elliptic Curve cipher (higher security) required by some servers (automatically enabled with USE_MQTT_AWS_IOT) (+11.4k code, +0.4k mem)
|
||||
// #define USE_MQTT_AWS_IOT // Enable MQTT for AWS IoT - requires a private key (+11.9k code, +0.4k mem)
|
||||
|
||||
//#define USE_KNX // Enable KNX IP Protocol Support (+9.4k code, +3k7 mem)
|
||||
#define USE_WEBSERVER // Enable web server and Wifi Manager (+66k code, +8k mem)
|
||||
#define USE_JAVASCRIPT_ES6 // Enable ECMAScript6 syntax using less JavaScript code bytes (fails on IE11)
|
||||
#define USE_WEBSEND_RESPONSE // Enable command WebSend response message (+1k code)
|
||||
#define USE_EMULATION_HUE // Enable Hue Bridge emulation for Alexa (+14k code, +2k mem)
|
||||
// #define USE_EMULATION_WEMO // Enable Belkin WeMo emulation for Alexa (+6k code, +2k mem)
|
||||
// #define USE_SENDMAIL
|
||||
|
||||
//#define USE_DISCOVERY // Enable mDNS for the following services (+8k code, +0.3k mem)
|
||||
#define USE_TIMERS // Add support for up to 16 timers (+2k2 code)
|
||||
#define USE_TIMERS_WEB // Add timer webpage support (+4k5 code)
|
||||
#define USE_SUNRISE // Add support for Sunrise and sunset tools (+16k)
|
||||
|
||||
// -- Compression ---------------------------------
|
||||
#define USE_UNISHOX_COMPRESSION // Add support for string compression in Rules or Scripts
|
||||
|
||||
#define USE_RULES // Add support for rules (+4k4 code)
|
||||
// #define USE_EXPRESSION // Add support for expression evaluation in rules (+3k2 code, +64 bytes mem)
|
||||
// #define SUPPORT_IF_STATEMENT // Add support for IF statement in rules (+4k2 code, -332 bytes mem)
|
||||
// #define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
|
||||
//#define USE_SCRIPT // Add support for script
|
||||
#define USE_SCRIPT_FATFS 4 // Add support for script storage on SD card (+12k code, +4k mem)
|
||||
|
||||
// -- Optional modules ----------------------------
|
||||
//#define ROTARY_V1 // Add support for MI Desk Lamp
|
||||
//#define USE_SONOFF_RF // Add support for Sonoff Rf Bridge
|
||||
// #define USE_RF_FLASH // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)
|
||||
//#define USE_SONOFF_SC // Add support for Sonoff Sc (+1k1 code)
|
||||
//#define USE_TUYA_MCU // Add support for Tuya Serial Dimmer
|
||||
//#define USE_ARMTRONIX_DIMMERS // Add support for Armtronix Dimmers (+1k4 code)
|
||||
//#define USE_PS_16_DZ // Add support for PS-16-DZ Dimmer and Sonoff L1 (+2k code)
|
||||
//#define USE_SONOFF_IFAN // Add support for Sonoff iFan02 and iFan03 (+2k code)
|
||||
//#define USE_BUZZER // Add support for a buzzer (+0k6 code)
|
||||
//#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+1k code, 252 iram (non 2.3.0))
|
||||
//#define USE_SHUTTER // Add Shutter support for up to 4 shutter with different motortypes (+6k code)
|
||||
//#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
|
||||
//#define USE_EXS_DIMMER // Add support for ES-Store WiFi Dimmer (+2k6 code)
|
||||
//#define USE_HOTPLUG // Add support for HotPlug
|
||||
//#define USE_DEVICE_GROUPS // Add support for device groups (+4k code)
|
||||
//#define USE_PWM_DIMMER // Add support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
|
||||
// #define USE_PWM_DIMMER_REMOTE // Add support for remote switches to PWM Dimmer, also adds device groups support (+0k7 code, also includes device groups)
|
||||
//#define USE_KEELOQ // Add support for Jarolift rollers by Keeloq algorithm (+4k5 code)
|
||||
//#define USE_SONOFF_D1 // Add support for Sonoff D1 Dimmer
|
||||
|
||||
// -- Optional light modules ----------------------
|
||||
#undef USE_LIGHT // DISABLES LIGHTS support
|
||||
// #define USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
|
||||
// // #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow
|
||||
// #define USE_WS2812_HARDWARE NEO_HW_WS2812 // Hardware type (NEO_HW_WS2812, NEO_HW_WS2812X, NEO_HW_WS2813, NEO_HW_SK6812, NEO_HW_LC8812, NEO_HW_APA106)
|
||||
// // #define USE_WS2812_CTYPE NEO_GRB // WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)
|
||||
// #define USE_WS2812_CTYPE NEO_GRBW // WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)
|
||||
// #define USE_MY92X1 // Add support for MY92X1 RGBCW led controller as used in Sonoff B1, Ailight and Lohas
|
||||
// #define USE_SM16716 // Add support for SM16716 RGB LED controller (+0k7 code)
|
||||
// #define USE_SM2135 // Add support for SM2135 RGBCW led control as used in Action LSC (+0k6 code)
|
||||
// #define USE_SONOFF_L1 // Add support for Sonoff L1 led control
|
||||
//#define USE_ELECTRIQ_MOODL // Add support for ElectriQ iQ-wifiMOODL RGBW LED controller
|
||||
|
||||
//#define USE_COUNTER // Enable counters
|
||||
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
|
||||
// #define USE_DS18x20 // Add support for DS18x20 sensors with id sort, single scan and read retry (+2k6 code)
|
||||
// #define W1_PARASITE_POWER // Optimize for parasite powered sensors
|
||||
|
||||
// -- I2C sensors ---------------------------------
|
||||
// #define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
||||
#ifdef USE_I2C
|
||||
// #define USE_SHT // Enable SHT1X sensor (+1k4 code)
|
||||
// #define USE_HTU // Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
|
||||
// #define USE_BMP // Enable BMP085/BMP180/BMP280/BME280 sensor (I2C address 0x76 or 0x77) (+4k code)
|
||||
#define USE_BME680 // Enable support for BME680 sensor using Bosch BME680 library (+4k code)
|
||||
// #define USE_BH1750 // Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
|
||||
// #define USE_VEML6070 // Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+0k5 code)
|
||||
// #define USE_ADS1115 // Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
|
||||
// #define USE_INA219 // Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
|
||||
// #define USE_INA226 // Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
|
||||
// #define USE_SHT3X // Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
|
||||
// #define USE_TSL2561 // Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
|
||||
// #define USE_TSL2591 // Enable TSL2591 sensor (I2C address 0x29, 0x39 or 0x49) using library Adafruit_TSL2591 (+2k3 code)
|
||||
// #define USE_MGS // Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
|
||||
#define MGS_SENSOR_ADDR 0x04 // Default Mutichannel Gas sensor i2c address
|
||||
// #define USE_SGP30 // Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
|
||||
// #define USE_SI1145 // Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
|
||||
// #define USE_LM75AD // Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
|
||||
// #define USE_APDS9960 // Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
|
||||
// #define USE_MCP230xx // Enable MCP23008/MCP23017 for GP INPUT ONLY (I2C addresses 0x20 - 0x27) providing command Sensor29 for configuration (+2k2 code)
|
||||
// #define USE_MCP230xx_ADDR 0x20 // Enable MCP23008/MCP23017 I2C Address to use (Must be within range 0x20 through 0x27 - set according to your wired setup)
|
||||
// #define USE_MCP230xx_OUTPUT // Enable MCP23008/MCP23017 OUTPUT support through sensor29 commands (+1k code)
|
||||
// #define USE_MCP230xx_DISPLAYOUTPUT // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
|
||||
// #define USE_PCA9685 // Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
// #define USE_PCA9685_ADDR 0x40 // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
|
||||
// #define USE_PCA9685_FREQ 50 // Define default PWM frequency in Hz to be used (must be within 24 to 1526) - If other value is used, it will rever to 50Hz
|
||||
// #define USE_MPR121 // Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
||||
// #define USE_CCS811 // Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
||||
// #define USE_MPU6050 // Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)
|
||||
// #define USE_DS3231 // Enable DS3231 external RTC in case no Wifi is avaliable. See docs in the source file (+1k2 code)
|
||||
// #define USE_RTC_ADDR 0x68 // Default I2C address 0x68
|
||||
// #define USE_MGC3130 // Enable MGC3130 Electric Field Effect Sensor (I2C address 0x42) (+2k7 code, 0k3 mem)
|
||||
// #define USE_MAX44009 // Enable MAX44009 Ambient Light sensor (I2C addresses 0x4A and 0x4B) (+0k8 code)
|
||||
// #define USE_SCD30 // Enable Sensiron SCd30 CO2 sensor (I2C address 0x61) (+3k3 code)
|
||||
// #define USE_SPS30 // Enable Sensiron SPS30 particle sensor (I2C address 0x69) (+1.7 code)
|
||||
// #define USE_ADE7953 // Enable ADE7953 Energy monitor as used on Shelly 2.5 (I2C address 0x38) (+1k5)
|
||||
// #define USE_VL53L0X // Enable VL53L0x time of flight sensor (I2C address 0x29) (+4k code)
|
||||
// #define USE_MLX90614 // Enable MLX90614 ir temp sensor (I2C address 0x5a) (+0.6k code)
|
||||
// #define USE_CHIRP // Enable CHIRP soil moisture sensor (variable I2C address, default 0x20)
|
||||
// #define USE_PAJ7620 // Enable PAJ7620 gesture sensor (I2C address 0x73) (+2.5k code)
|
||||
// #define USE_PCF8574 // Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x27 and 0x38 - 0x3F) (+1k9 code)
|
||||
// #define USE_HIH6 // Enable Honeywell HIH Humidity and Temperature sensor (I2C address 0x27) (+0k6)
|
||||
// #define USE_DHT12 // [I2cDriver41] Enable DHT12 humidity and temperature sensor (I2C address 0x5C) (+0k7 code)
|
||||
// #define USE_DS1624 // [I2cDriver42] Enable DS1624, DS1621 temperature sensor (I2C addresses 0x48 - 0x4F)
|
||||
// #define USE_AHT1x // [I2cDriver43] Enable AHT10/15 humidity and temperature sensor (I2C address 0x38) (+0k8 code)
|
||||
// #define USE_WEMOS_MOTOR_V1 // [I2cDriver44] Enable Wemos motor driver V1 ()
|
||||
// #define USE_HDC1080 // [I2cDriver45] Enable HDC1080 temperature/humidity sensor (I2C address 0x40) (+1k5 code)
|
||||
|
||||
// #define USE_DISPLAY // Add I2C Display Support (+2k code)
|
||||
// #define USE_DISPLAY_MODES1TO5 // Enable display mode 1 to 5 in addition to mode 0
|
||||
// #define USE_DISPLAY_LCD // [DisplayModel 1] Enable Lcd display (I2C addresses 0x27 and 0x3F) (+6k code)
|
||||
// #define USE_DISPLAY_SSD1306 // [DisplayModel 2] Enable SSD1306 Oled 128x64 display (I2C addresses 0x3C and 0x3D) (+16k code)
|
||||
// #define USE_DISPLAY_MATRIX // [DisplayModel 3] Enable 8x8 Matrix display (I2C adresseses see below) (+11k code)
|
||||
// #define MTX_ADDRESS1 0x71 // [DisplayAddress1] I2C address of first 8x8 matrix module
|
||||
// #define MTX_ADDRESS2 0x74 // [DisplayAddress2] I2C address of second 8x8 matrix module
|
||||
// #define MTX_ADDRESS3 0x75 // [DisplayAddress3] I2C address of third 8x8 matrix module
|
||||
// #define MTX_ADDRESS4 0x72 // [DisplayAddress4] I2C address of fourth 8x8 matrix module
|
||||
// #define MTX_ADDRESS5 0x73 // [DisplayAddress5] I2C address of fifth 8x8 matrix module
|
||||
// #define MTX_ADDRESS6 0x76 // [DisplayAddress6] I2C address of sixth 8x8 matrix module
|
||||
// #define MTX_ADDRESS7 0x00 // [DisplayAddress7] I2C address of seventh 8x8 matrix module
|
||||
// #define MTX_ADDRESS8 0x00 // [DisplayAddress8] I2C address of eigth 8x8 matrix module
|
||||
// #define USE_DISPLAY_SH1106 // [DisplayModel 7] Enable SH1106 Oled 128x64 display (I2C addresses 0x3C and 0x3D)
|
||||
#endif // USE_I2C
|
||||
|
||||
// // -- SPI sensors ---------------------------------
|
||||
// #define USE_SPI // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)
|
||||
// #ifdef USE_SPI
|
||||
// // #define USE_NRF24 // Add SPI support for NRF24L01(+) (+2k6 code)
|
||||
// #ifdef USE_NRF24
|
||||
// #define USE_MIBLE // BLE-bridge for some Mijia-BLE-sensors (+4k7 code)
|
||||
// #else
|
||||
// #ifndef USE_DISPLAY
|
||||
// #define USE_DISPLAY // Add SPI Display support for 320x240 and 480x320 TFT
|
||||
// #endif
|
||||
// #define USE_DISPLAY_ILI9341 // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
|
||||
// // #define USE_DISPLAY_EPAPER_29 // [DisplayModel 5] Enable e-paper 2.9 inch display (+19k code)
|
||||
// // #define USE_DISPLAY_EPAPER_42 // [DisplayModel 6] Enable e-paper 4.2 inch display
|
||||
// // #define USE_DISPLAY_ILI9488 // [DisplayModel 8] [I2cDriver38] (Touch)
|
||||
// // #define USE_DISPLAY_SSD1351 // [DisplayModel 9]
|
||||
// // #define USE_DISPLAY_RA8876 // [DisplayModel 10] [I2cDriver39] (Touch)
|
||||
// #endif // USE_NRF24
|
||||
// #endif // USE_SPI
|
||||
|
||||
// -- Serial sensors ------------------------------
|
||||
//#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
||||
//#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
||||
//#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
|
||||
//#define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
|
||||
//#define USE_HPMA // Add support for Honeywell HPMA115S0 particle concentration sensor (+1k4)
|
||||
//#define USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+1k1 code)
|
||||
//#define USE_MP3_PLAYER // Use of the DFPlayer Mini MP3 Player RB-DFR-562 commands: play, volume and stop
|
||||
//#define USE_AZ7798 // Add support for AZ-Instrument 7798 CO2 datalogger (+1k6 code)
|
||||
//#define USE_PN532_HSU // Add support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
|
||||
// #define USE_PN532_CAUSE_EVENTS // Cause event execution for PN532_UID= and PN532_DATA=[if defined] (+ 30 bytes code)
|
||||
#define USE_PN532_DATA_FUNCTION // Add sensor40 command support for erase, setting data block content (+1k7 code, 388 bytes mem)
|
||||
#define USE_PN532_DATA_RAW // Allow DATA block to be used by non-alpha-numberic data (+ 80 bytes code, 48 bytes ram)
|
||||
//#define USE_RDM6300 // Add support for RDM6300 125kHz RFID Reader (+0k8)
|
||||
//#define USE_IBEACON // Add support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
|
||||
//#define USE_HM10 // Add support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
|
||||
//#define USE_HRXL // Add support for MaxBotix HRXL-MaxSonar ultrasonic range finders (+0k7)
|
||||
|
||||
// Power monitoring sensors -----------------------
|
||||
#undef USE_ENERGY_SENSOR // Disable energy sensors (-14k code)
|
||||
// #define USE_ENERGY_MARGIN_DETECTION // Add support for Energy Margin detection (+1k6 code)
|
||||
// // #define USE_ENERGY_POWER_LIMIT // Add additional support for Energy Power Limit detection (+1k2 code)
|
||||
// #define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
||||
// #define USE_PZEM_AC // Add support for PZEM014,016 Modbus Energy monitor (+1k1 code)
|
||||
// //#define USE_PZEM_DC // Add support for PZEM003,017 Modbus Energy monitor (+1k1 code)
|
||||
// #define USE_MCP39F501 // Add support for MCP39F501 Energy monitor as used in Shelly 2 (+3k1 code)
|
||||
//#define USE_SDM120 // Add support for Eastron SDM120-Modbus energy monitor (+1k1 code)
|
||||
//#define USE_SDM630 // Add support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
//#define USE_DDS2382 // Add support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
//#define USE_DDSU666 // Add support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
//#define USE_SOLAX_X1 // Add support for Solax X1 series Modbus log info (+4k1 code)
|
||||
//#define USE_LE01MR // Add support for F&F LE-01MR modbus energy meter
|
||||
|
||||
// -- Low level interface devices -----------------
|
||||
//#define USE_DHT // Disable support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
||||
|
||||
//#define USE_MAX31855 // Disable MAX31855 K-Type thermocouple sensor using softSPI
|
||||
|
||||
// -- IR Remote features --------------------------
|
||||
//#define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k3 code, 0k3 mem, 48 iram)
|
||||
#define USE_IR_SEND_NEC // Support IRsend NEC protocol
|
||||
#define USE_IR_SEND_RC5 // Support IRsend Philips RC5 protocol
|
||||
#define USE_IR_SEND_RC6 // Support IRsend Philips RC6 protocol
|
||||
|
||||
// #define USE_IR_RECEIVE // Support for IR receiver (+7k2 code, 264 iram)
|
||||
#define IR_RCV_BUFFER_SIZE 100 // Max number of packets allowed in capture buffer (default 100 (*2 bytes ram))
|
||||
#define IR_RCV_TIMEOUT 15 // Number of milli-Seconds of no-more-data before we consider a message ended (default 15)
|
||||
#define IR_RCV_MIN_UNKNOWN_SIZE 6 // Set the smallest sized "UNKNOWN" message packets we actually care about (default 6, max 255)
|
||||
|
||||
// -- Zigbee interface ----------------------------
|
||||
#define USE_ZIGBEE
|
||||
#undef USE_ZIGBEE_ZNP
|
||||
#define USE_ZIGBEE_EZSP
|
||||
#define USE_TCP_BRIDGE
|
||||
#define USE_ZIGBEE_PANID 0x1A63 // arbitrary PAN ID for Zigbee network, must be unique in the home
|
||||
#define USE_ZIGBEE_EXTPANID 0xCCCCCCCCCCCCCCCCL // arbitrary extended PAN ID
|
||||
#define USE_ZIGBEE_CHANNEL 11 // Zigbee Channel (11-26)
|
||||
#define USE_ZIGBEE_PRECFGKEY_L 0x0F0D0B0907050301L // note: changing requires to re-pair all devices
|
||||
#define USE_ZIGBEE_PRECFGKEY_H 0x0D0C0A0806040200L // note: changing requires to re-pair all devices
|
||||
#define USE_ZIGBEE_PERMIT_JOIN false // don't allow joining by default
|
||||
#define USE_ZIGBEE_COALESCE_ATTR_TIMER 350 // timer to coalesce attribute values (in ms)
|
||||
|
||||
|
||||
// ------------------------------------------------
|
||||
|
||||
//#define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
|
||||
|
||||
//#define USE_TM1638 // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
|
||||
//#define USE_HX711 // Add support for HX711 load cell (+1k5 code)
|
||||
#define USE_HX711_GUI // Add optional web GUI to HX711 as scale (+1k8 code)
|
||||
|
||||
//#define USE_TX20_WIND_SENSOR // Add support for La Crosse TX20 anemometer (+2k6/0k8 code)
|
||||
//#define USE_TX23_WIND_SENSOR // Add support for La Crosse TX23 anemometer (+2k7/1k code)
|
||||
|
||||
//#define USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+2k7 code, 460 iram)
|
||||
|
||||
//#define USE_RF_SENSOR // Add support for RF sensor receiver (434MHz or 868MHz) (+0k8 code)
|
||||
// #define USE_THEO_V2 // Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver (+1k4 code)
|
||||
// #define USE_ALECTO_V2 // Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver (+1k7 code)
|
||||
|
||||
//#define USE_HRE // Add support for Badger HR-E Water Meter (+1k4 code)
|
||||
//#define USE_A4988_STEPPER // Add support for A4988 stepper-motor-driver-circuit (+10k5 code)
|
||||
|
||||
//#define USE_TASMOTA_CLIENT // Add support for Arduino Uno/Pro Mini via serial interface including flashing (+2k3 code, 44 mem)
|
||||
|
||||
#endif // SONOFF_ZIGBEEBRIDGE ******************************************************************
|
||||
|
||||
|
||||
|
||||
/*********************************************************************************************\
|
||||
* [tasmota-lite.bin]
|
||||
* Provide an image without sensors
|
||||
|
|
|
|||
Loading…
Reference in New Issue