mirror of https://github.com/arendst/Tasmota.git
Merge remote-tracking branch 'Tasmota/development' into development
This commit is contained in:
Jason2866
commit
24b44be48f
|
|
@ -69,4 +69,6 @@ Index | Define | Driver | Device | Address(es) | Description
|
|||
45 | USE_HDC1080 | xsns_65 | HDC1080 | 0x40 | Temperature and Humidity sensor
|
||||
46 | USE_IAQ | xsns_66 | IAQ | 0x5a | Air quality sensor
|
||||
47 | USE_DISPLAY_SEVENSEG| xdsp_11 | HT16K33 | 0x70 - 0x77 | Seven segment LED
|
||||
48 | USE_AS3935 | xsns_67 | AS3935 | 0x03 | Franklin Lightning Sensor
|
||||
48 | USE_AS3935 | xsns_67 | AS3935 | 0x03 | Franklin Lightning Sensor
|
||||
49 | USE_VEML6075 | xsns_70 | VEML6075 | 0x10 | UVA/UVB/UVINDEX Sensor
|
||||
50 | USE_VEML7700 | xsns_71 | VEML7700 | 0x10 | Ambient light intensity sensor
|
||||
|
|
@ -54,5 +54,8 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
|
|||
|
||||
### Version 8.3.1.1
|
||||
|
||||
- Change IRremoteESP8266 library updated to v2.7.7
|
||||
- Add command ``Rule0`` to change global rule parameters
|
||||
- Add more functionality to ``Switchmode`` 11 and 12 (#8450)
|
||||
- Add support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432)
|
||||
- Add support for VEML7700 Ambient light intensity Sensor by device111 (#8432)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,23 @@
|
|||
language: c
|
||||
sudo: false
|
||||
cache:
|
||||
directories:
|
||||
- ~/arduino_ide
|
||||
- ~/.arduino15/packages/
|
||||
git:
|
||||
depth: false
|
||||
quiet: true
|
||||
env:
|
||||
global:
|
||||
- PRETTYNAME="Adafruit BusIO Library"
|
||||
|
||||
before_install:
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/install.sh)
|
||||
|
||||
script:
|
||||
- build_main_platforms
|
||||
|
||||
# Generate and deploy documentation
|
||||
after_success:
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/library_check.sh)
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/doxy_gen_and_deploy.sh)
|
||||
|
|
@ -0,0 +1,258 @@
|
|||
#include <Adafruit_BusIO_Register.h>
|
||||
|
||||
/*!
|
||||
* @brief Create a register we access over an I2C Device (which defines the bus and address)
|
||||
* @param i2cdevice The I2CDevice to use for underlying I2C access
|
||||
* @param reg_addr The address pointer value for the I2C/SMBus register, can be 8 or 16 bits
|
||||
* @param width The width of the register data itself, defaults to 1 byte
|
||||
* @param bitorder The bit order of the register (used when width is > 1), defaults to LSBFIRST
|
||||
* @param address_width The width of the register address itself, defaults to 1 byte
|
||||
*/
|
||||
Adafruit_BusIO_Register::Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice, uint16_t reg_addr,
|
||||
uint8_t width, uint8_t bitorder, uint8_t address_width) {
|
||||
_i2cdevice = i2cdevice;
|
||||
_spidevice = NULL;
|
||||
_addrwidth = address_width;
|
||||
_address = reg_addr;
|
||||
_bitorder = bitorder;
|
||||
_width = width;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Create a register we access over an SPI Device (which defines the bus and CS pin)
|
||||
* @param spidevice The SPIDevice to use for underlying I2C access
|
||||
* @param reg_addr The address pointer value for the I2C/SMBus register, can be 8 or 16 bits
|
||||
* @param type The method we use to read/write data to SPI (which is not as well defined as I2C)
|
||||
* @param width The width of the register data itself, defaults to 1 byte
|
||||
* @param bitorder The bit order of the register (used when width is > 1), defaults to LSBFIRST
|
||||
* @param address_width The width of the register address itself, defaults to 1 byte
|
||||
*/
|
||||
Adafruit_BusIO_Register::Adafruit_BusIO_Register(Adafruit_SPIDevice *spidevice, uint16_t reg_addr,
|
||||
Adafruit_BusIO_SPIRegType type,
|
||||
uint8_t width, uint8_t bitorder, uint8_t address_width) {
|
||||
_spidevice = spidevice;
|
||||
_spiregtype = type;
|
||||
_i2cdevice = NULL;
|
||||
_addrwidth = address_width;
|
||||
_address = reg_addr;
|
||||
_bitorder = bitorder;
|
||||
_width = width;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Create a register we access over an I2C or SPI Device. This is a handy function because we
|
||||
* can pass in NULL for the unused interface, allowing libraries to mass-define all the registers
|
||||
* @param i2cdevice The I2CDevice to use for underlying I2C access, if NULL we use SPI
|
||||
* @param spidevice The SPIDevice to use for underlying I2C access, if NULL we use I2C
|
||||
* @param reg_addr The address pointer value for the I2C/SMBus register, can be 8 or 16 bits
|
||||
* @param type The method we use to read/write data to SPI (which is not as well defined as I2C)
|
||||
* @param width The width of the register data itself, defaults to 1 byte
|
||||
* @param bitorder The bit order of the register (used when width is > 1), defaults to LSBFIRST
|
||||
* @param address_width The width of the register address itself, defaults to 1 byte
|
||||
*/
|
||||
Adafruit_BusIO_Register::Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice, Adafruit_SPIDevice *spidevice,
|
||||
Adafruit_BusIO_SPIRegType type, uint16_t reg_addr,
|
||||
uint8_t width, uint8_t bitorder, uint8_t address_width) {
|
||||
_spidevice = spidevice;
|
||||
_i2cdevice = i2cdevice;
|
||||
_spiregtype = type;
|
||||
_addrwidth = address_width;
|
||||
_address = reg_addr;
|
||||
_bitorder = bitorder;
|
||||
_width = width;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Write a buffer of data to the register location
|
||||
* @param buffer Pointer to data to write
|
||||
* @param len Number of bytes to write
|
||||
* @return True on successful write (only really useful for I2C as SPI is uncheckable)
|
||||
*/
|
||||
bool Adafruit_BusIO_Register::write(uint8_t *buffer, uint8_t len) {
|
||||
|
||||
uint8_t addrbuffer[2] = {(uint8_t)(_address & 0xFF), (uint8_t)(_address>>8)};
|
||||
|
||||
if (_i2cdevice) {
|
||||
return _i2cdevice->write(buffer, len, true, addrbuffer, _addrwidth);
|
||||
}
|
||||
if (_spidevice) {
|
||||
if (_spiregtype == ADDRBIT8_HIGH_TOREAD) {
|
||||
addrbuffer[0] &= ~0x80;
|
||||
}
|
||||
return _spidevice->write( buffer, len, addrbuffer, _addrwidth);
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Write up to 4 bytes of data to the register location
|
||||
* @param value Data to write
|
||||
* @param numbytes How many bytes from 'value' to write
|
||||
* @return True on successful write (only really useful for I2C as SPI is uncheckable)
|
||||
*/
|
||||
bool Adafruit_BusIO_Register::write(uint32_t value, uint8_t numbytes) {
|
||||
if (numbytes == 0) {
|
||||
numbytes = _width;
|
||||
}
|
||||
if (numbytes > 4) {
|
||||
return false;
|
||||
}
|
||||
|
||||
for (int i=0; i<numbytes; i++) {
|
||||
if (_bitorder == LSBFIRST) {
|
||||
_buffer[i] = value & 0xFF;
|
||||
} else {
|
||||
_buffer[numbytes-i-1] = value & 0xFF;
|
||||
}
|
||||
value >>= 8;
|
||||
}
|
||||
return write(_buffer, numbytes);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read data from the register location. This does not do any error checking!
|
||||
* @return Returns 0xFFFFFFFF on failure, value otherwise
|
||||
*/
|
||||
uint32_t Adafruit_BusIO_Register::read(void) {
|
||||
if (! read(_buffer, _width)) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
uint32_t value = 0;
|
||||
|
||||
for (int i=0; i < _width; i++) {
|
||||
value <<= 8;
|
||||
if (_bitorder == LSBFIRST) {
|
||||
value |= _buffer[_width-i-1];
|
||||
} else {
|
||||
value |= _buffer[i];
|
||||
}
|
||||
}
|
||||
|
||||
return value;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Read a buffer of data from the register location
|
||||
* @param buffer Pointer to data to read into
|
||||
* @param len Number of bytes to read
|
||||
* @return True on successful write (only really useful for I2C as SPI is uncheckable)
|
||||
*/
|
||||
bool Adafruit_BusIO_Register::read(uint8_t *buffer, uint8_t len) {
|
||||
uint8_t addrbuffer[2] = {(uint8_t)(_address & 0xFF), (uint8_t)(_address>>8)};
|
||||
|
||||
if (_i2cdevice) {
|
||||
return _i2cdevice->write_then_read(addrbuffer, _addrwidth, buffer, len);
|
||||
}
|
||||
if (_spidevice) {
|
||||
if (_spiregtype == ADDRBIT8_HIGH_TOREAD) {
|
||||
addrbuffer[0] |= 0x80;
|
||||
}
|
||||
return _spidevice->write_then_read(addrbuffer, _addrwidth, buffer, len);
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read 2 bytes of data from the register location
|
||||
* @param value Pointer to uint16_t variable to read into
|
||||
* @return True on successful write (only really useful for I2C as SPI is uncheckable)
|
||||
*/
|
||||
bool Adafruit_BusIO_Register::read(uint16_t *value) {
|
||||
if (! read(_buffer, 2)) {
|
||||
return false;
|
||||
}
|
||||
|
||||
if (_bitorder == LSBFIRST) {
|
||||
*value = _buffer[1];
|
||||
*value <<= 8;
|
||||
*value |= _buffer[0];
|
||||
} else {
|
||||
*value = _buffer[0];
|
||||
*value <<= 8;
|
||||
*value |= _buffer[1];
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read 1 byte of data from the register location
|
||||
* @param value Pointer to uint8_t variable to read into
|
||||
* @return True on successful write (only really useful for I2C as SPI is uncheckable)
|
||||
*/
|
||||
bool Adafruit_BusIO_Register::read(uint8_t *value) {
|
||||
if (! read(_buffer, 1)) {
|
||||
return false;
|
||||
}
|
||||
|
||||
*value = _buffer[0];
|
||||
return true;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Pretty printer for this register
|
||||
* @param s The Stream to print to, defaults to &Serial
|
||||
*/
|
||||
void Adafruit_BusIO_Register::print(Stream *s) {
|
||||
uint32_t val = read();
|
||||
s->print("0x"); s->print(val, HEX);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Pretty printer for this register
|
||||
* @param s The Stream to print to, defaults to &Serial
|
||||
*/
|
||||
void Adafruit_BusIO_Register::println(Stream *s) {
|
||||
print(s);
|
||||
s->println();
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Create a slice of the register that we can address without touching other bits
|
||||
* @param reg The Adafruit_BusIO_Register which defines the bus/register
|
||||
* @param bits The number of bits wide we are slicing
|
||||
* @param shift The number of bits that our bit-slice is shifted from LSB
|
||||
*/
|
||||
Adafruit_BusIO_RegisterBits::Adafruit_BusIO_RegisterBits(Adafruit_BusIO_Register *reg, uint8_t bits, uint8_t shift) {
|
||||
_register = reg;
|
||||
_bits = bits;
|
||||
_shift = shift;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read 4 bytes of data from the register
|
||||
* @return data The 4 bytes to read
|
||||
*/
|
||||
uint32_t Adafruit_BusIO_RegisterBits::read(void) {
|
||||
uint32_t val = _register->read();
|
||||
val >>= _shift;
|
||||
return val & ((1 << (_bits)) - 1);
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Write 4 bytes of data to the register
|
||||
* @param data The 4 bytes to write
|
||||
*/
|
||||
void Adafruit_BusIO_RegisterBits::write(uint32_t data) {
|
||||
uint32_t val = _register->read();
|
||||
|
||||
// mask off the data before writing
|
||||
uint32_t mask = (1 << (_bits)) - 1;
|
||||
data &= mask;
|
||||
|
||||
mask <<= _shift;
|
||||
val &= ~mask; // remove the current data at that spot
|
||||
val |= data << _shift; // and add in the new data
|
||||
|
||||
_register->write(val, _register->width());
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief The width of the register data, helpful for doing calculations
|
||||
* @returns The data width used when initializing the register
|
||||
*/
|
||||
uint8_t Adafruit_BusIO_Register::width(void) { return _width; }
|
||||
|
|
@ -0,0 +1,69 @@
|
|||
#include <Adafruit_I2CDevice.h>
|
||||
#include <Adafruit_SPIDevice.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
|
||||
#ifndef Adafruit_BusIO_Register_h
|
||||
#define Adafruit_BusIO_Register_h
|
||||
|
||||
typedef enum _Adafruit_BusIO_SPIRegType {
|
||||
ADDRBIT8_HIGH_TOREAD = 0,
|
||||
} Adafruit_BusIO_SPIRegType;
|
||||
|
||||
/*!
|
||||
* @brief The class which defines a device register (a location to read/write data from)
|
||||
*/
|
||||
class Adafruit_BusIO_Register {
|
||||
public:
|
||||
Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice, uint16_t reg_addr,
|
||||
uint8_t width=1, uint8_t bitorder=LSBFIRST,
|
||||
uint8_t address_width=1);
|
||||
Adafruit_BusIO_Register(Adafruit_SPIDevice *spidevice, uint16_t reg_addr,
|
||||
Adafruit_BusIO_SPIRegType type,
|
||||
uint8_t width=1, uint8_t bitorder=LSBFIRST,
|
||||
uint8_t address_width=1);
|
||||
|
||||
Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice,
|
||||
Adafruit_SPIDevice *spidevice,
|
||||
Adafruit_BusIO_SPIRegType type,
|
||||
uint16_t reg_addr,
|
||||
uint8_t width=1, uint8_t bitorder=LSBFIRST,
|
||||
uint8_t address_width=1);
|
||||
|
||||
bool read(uint8_t *buffer, uint8_t len);
|
||||
bool read(uint8_t *value);
|
||||
bool read(uint16_t *value);
|
||||
uint32_t read(void);
|
||||
bool write(uint8_t *buffer, uint8_t len);
|
||||
bool write(uint32_t value, uint8_t numbytes=0);
|
||||
|
||||
uint8_t width(void);
|
||||
|
||||
void print(Stream *s=&Serial);
|
||||
void println(Stream *s=&Serial);
|
||||
|
||||
private:
|
||||
Adafruit_I2CDevice *_i2cdevice;
|
||||
Adafruit_SPIDevice *_spidevice;
|
||||
Adafruit_BusIO_SPIRegType _spiregtype;
|
||||
uint16_t _address;
|
||||
uint8_t _width, _addrwidth, _bitorder;
|
||||
uint8_t _buffer[4]; // we wont support anything larger than uint32 for non-buffered read
|
||||
};
|
||||
|
||||
|
||||
/*!
|
||||
* @brief The class which defines a slice of bits from within a device register (a location to read/write data from)
|
||||
*/
|
||||
class Adafruit_BusIO_RegisterBits {
|
||||
public:
|
||||
Adafruit_BusIO_RegisterBits(Adafruit_BusIO_Register *reg, uint8_t bits, uint8_t shift);
|
||||
void write(uint32_t value);
|
||||
uint32_t read(void);
|
||||
private:
|
||||
Adafruit_BusIO_Register *_register;
|
||||
uint8_t _bits, _shift;
|
||||
};
|
||||
|
||||
|
||||
#endif //BusIO_Register_h
|
||||
|
|
@ -0,0 +1,213 @@
|
|||
#include <Adafruit_I2CDevice.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
//#define DEBUG_SERIAL Serial
|
||||
|
||||
/*!
|
||||
* @brief Create an I2C device at a given address
|
||||
* @param addr The 7-bit I2C address for the device
|
||||
* @param theWire The I2C bus to use, defaults to &Wire
|
||||
*/
|
||||
Adafruit_I2CDevice::Adafruit_I2CDevice(uint8_t addr, TwoWire *theWire) {
|
||||
_addr = addr;
|
||||
_wire = theWire;
|
||||
_begun = false;
|
||||
#ifdef ARDUINO_ARCH_SAMD
|
||||
_maxBufferSize = 250; // as defined in Wire.h's RingBuffer
|
||||
#else
|
||||
_maxBufferSize = 32;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Initializes and does basic address detection
|
||||
* @param addr_detect Whether we should attempt to detect the I2C address with a scan.
|
||||
* 99% of sensors/devices don't mind but once in a while, they spaz on a scan!
|
||||
* @return True if I2C initialized and a device with the addr found
|
||||
*/
|
||||
bool Adafruit_I2CDevice::begin(bool addr_detect) {
|
||||
_wire->begin();
|
||||
_begun = true;
|
||||
|
||||
if (addr_detect) {
|
||||
return detected();
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Scans I2C for the address - note will give a false-positive
|
||||
* if there's no pullups on I2C
|
||||
* @return True if I2C initialized and a device with the addr found
|
||||
*/
|
||||
bool Adafruit_I2CDevice::detected(void) {
|
||||
// Init I2C if not done yet
|
||||
if (!_begun && !begin()) {
|
||||
return false;
|
||||
}
|
||||
|
||||
// A basic scanner, see if it ACK's
|
||||
_wire->beginTransmission(_addr);
|
||||
if (_wire->endTransmission () == 0) {
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Write a buffer or two to the I2C device. Cannot be more than maxBufferSize() bytes.
|
||||
* @param buffer Pointer to buffer of data to write
|
||||
* @param len Number of bytes from buffer to write
|
||||
* @param prefix_buffer Pointer to optional array of data to write before buffer.
|
||||
* Cannot be more than maxBufferSize() bytes.
|
||||
* @param prefix_len Number of bytes from prefix buffer to write
|
||||
* @param stop Whether to send an I2C STOP signal on write
|
||||
* @return True if write was successful, otherwise false.
|
||||
*/
|
||||
bool Adafruit_I2CDevice::write(uint8_t *buffer, size_t len, bool stop, uint8_t *prefix_buffer, size_t prefix_len) {
|
||||
if ((len+prefix_len) > maxBufferSize()) {
|
||||
// currently not guaranteed to work if more than 32 bytes!
|
||||
// we will need to find out if some platforms have larger
|
||||
// I2C buffer sizes :/
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.println(F("\tI2CDevice could not write such a large buffer"));
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
_wire->beginTransmission(_addr);
|
||||
|
||||
// Write the prefix data (usually an address)
|
||||
if ((prefix_len != 0) && (prefix_buffer != NULL)) {
|
||||
if (_wire->write(prefix_buffer, prefix_len) != prefix_len) {
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.println(F("\tI2CDevice failed to write"));
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
// Write the data itself
|
||||
if (_wire->write(buffer, len) != len) {
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.println(F("\tI2CDevice failed to write"));
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print(F("\tI2CDevice Wrote: "));
|
||||
if ((prefix_len != 0) && (prefix_buffer != NULL)) {
|
||||
for (uint16_t i=0; i<prefix_len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(prefix_buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
}
|
||||
}
|
||||
for (uint16_t i=0; i<len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
if (len % 32 == 31) {
|
||||
DEBUG_SERIAL.println();
|
||||
}
|
||||
}
|
||||
DEBUG_SERIAL.println();
|
||||
#endif
|
||||
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print("Stop: "); DEBUG_SERIAL.println(stop);
|
||||
#endif
|
||||
|
||||
if (_wire->endTransmission(stop) == 0) {
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.println("Sent!");
|
||||
#endif
|
||||
return true;
|
||||
} else {
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.println("Failed to send!");
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Read from I2C into a buffer from the I2C device.
|
||||
* Cannot be more than maxBufferSize() bytes.
|
||||
* @param buffer Pointer to buffer of data to read into
|
||||
* @param len Number of bytes from buffer to read.
|
||||
* @param stop Whether to send an I2C STOP signal on read
|
||||
* @return True if read was successful, otherwise false.
|
||||
*/
|
||||
bool Adafruit_I2CDevice::read(uint8_t *buffer, size_t len, bool stop) {
|
||||
if (len > maxBufferSize()) {
|
||||
// currently not guaranteed to work if more than 32 bytes!
|
||||
// we will need to find out if some platforms have larger
|
||||
// I2C buffer sizes :/
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.println(F("\tI2CDevice could not read such a large buffer"));
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
size_t recv = _wire->requestFrom((uint8_t)_addr, (uint8_t)len, (uint8_t)stop);
|
||||
if (recv != len) {
|
||||
// Not enough data available to fulfill our obligation!
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print(F("\tI2CDevice did not receive enough data: "));
|
||||
DEBUG_SERIAL.println(recv);
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
for (uint16_t i=0; i<len; i++) {
|
||||
buffer[i] = _wire->read();
|
||||
}
|
||||
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print(F("\tI2CDevice Read: "));
|
||||
for (uint16_t i=0; i<len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
if (len % 32 == 31) {
|
||||
DEBUG_SERIAL.println();
|
||||
}
|
||||
}
|
||||
DEBUG_SERIAL.println();
|
||||
#endif
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Write some data, then read some data from I2C into another buffer.
|
||||
* Cannot be more than maxBufferSize() bytes. The buffers can point to
|
||||
* same/overlapping locations.
|
||||
* @param write_buffer Pointer to buffer of data to write from
|
||||
* @param write_len Number of bytes from buffer to write.
|
||||
* @param read_buffer Pointer to buffer of data to read into.
|
||||
* @param read_len Number of bytes from buffer to read.
|
||||
* @param stop Whether to send an I2C STOP signal between the write and read
|
||||
* @return True if write & read was successful, otherwise false.
|
||||
*/
|
||||
bool Adafruit_I2CDevice::write_then_read(uint8_t *write_buffer, size_t write_len, uint8_t *read_buffer, size_t read_len, bool stop) {
|
||||
if (! write(write_buffer, write_len, stop)) {
|
||||
return false;
|
||||
}
|
||||
|
||||
return read(read_buffer, read_len);
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Returns the 7-bit address of this device
|
||||
* @return The 7-bit address of this device
|
||||
*/
|
||||
uint8_t Adafruit_I2CDevice::address(void) {
|
||||
return _addr;
|
||||
}
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
#include <Wire.h>
|
||||
|
||||
#ifndef Adafruit_I2CDevice_h
|
||||
#define Adafruit_I2CDevice_h
|
||||
|
||||
///< The class which defines how we will talk to this device over I2C
|
||||
class Adafruit_I2CDevice {
|
||||
public:
|
||||
Adafruit_I2CDevice(uint8_t addr, TwoWire *theWire=&Wire);
|
||||
uint8_t address(void);
|
||||
bool begin(bool addr_detect=true);
|
||||
bool detected(void);
|
||||
|
||||
bool read(uint8_t *buffer, size_t len, bool stop=true);
|
||||
bool write(uint8_t *buffer, size_t len, bool stop=true, uint8_t *prefix_buffer=NULL, size_t prefix_len=0);
|
||||
bool write_then_read(uint8_t *write_buffer, size_t write_len, uint8_t *read_buffer, size_t read_len, bool stop=false);
|
||||
|
||||
/*! @brief How many bytes we can read in a transaction
|
||||
* @return The size of the Wire receive/transmit buffer */
|
||||
uint16_t maxBufferSize() { return _maxBufferSize; }
|
||||
|
||||
private:
|
||||
uint8_t _addr;
|
||||
TwoWire *_wire;
|
||||
bool _begun;
|
||||
uint16_t _maxBufferSize;
|
||||
};
|
||||
|
||||
#endif // Adafruit_I2CDevice_h
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
#include "Adafruit_BusIO_Register.h"
|
||||
#ifndef _ADAFRUIT_I2C_REGISTER_H_
|
||||
#define _ADAFRUIT_I2C_REGISTER_H_
|
||||
|
||||
typedef Adafruit_BusIO_Register Adafruit_I2CRegister;
|
||||
typedef Adafruit_BusIO_RegisterBits Adafruit_I2CRegisterBits;
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,301 @@
|
|||
#include <Adafruit_SPIDevice.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
//#define DEBUG_SERIAL Serial
|
||||
|
||||
/*!
|
||||
* @brief Create an SPI device with the given CS pin and settins
|
||||
* @param cspin The arduino pin number to use for chip select
|
||||
* @param freq The SPI clock frequency to use, defaults to 1MHz
|
||||
* @param dataOrder The SPI data order to use for bits within each byte, defaults to SPI_BITORDER_MSBFIRST
|
||||
* @param dataMode The SPI mode to use, defaults to SPI_MODE0
|
||||
* @param theSPI The SPI bus to use, defaults to &theSPI
|
||||
*/
|
||||
Adafruit_SPIDevice::Adafruit_SPIDevice(int8_t cspin, uint32_t freq, BitOrder dataOrder, uint8_t dataMode, SPIClass *theSPI) {
|
||||
_cs = cspin;
|
||||
_sck = _mosi = _miso = -1;
|
||||
_spi = theSPI;
|
||||
_begun = false;
|
||||
_spiSetting = new SPISettings(freq, dataOrder, dataMode);
|
||||
_freq = freq;
|
||||
_dataOrder = dataOrder;
|
||||
_dataMode = dataMode;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Create an SPI device with the given CS pin and settins
|
||||
* @param cspin The arduino pin number to use for chip select
|
||||
* @param sckpin The arduino pin number to use for SCK
|
||||
* @param misopin The arduino pin number to use for MISO, set to -1 if not used
|
||||
* @param mosipin The arduino pin number to use for MOSI, set to -1 if not used
|
||||
* @param freq The SPI clock frequency to use, defaults to 1MHz
|
||||
* @param dataOrder The SPI data order to use for bits within each byte, defaults to SPI_BITORDER_MSBFIRST
|
||||
* @param dataMode The SPI mode to use, defaults to SPI_MODE0
|
||||
*/
|
||||
Adafruit_SPIDevice::Adafruit_SPIDevice(int8_t cspin, int8_t sckpin, int8_t misopin, int8_t mosipin,
|
||||
uint32_t freq, BitOrder dataOrder, uint8_t dataMode) {
|
||||
_cs = cspin;
|
||||
_sck = sckpin;
|
||||
_miso = misopin;
|
||||
_mosi = mosipin;
|
||||
_freq = freq;
|
||||
_dataOrder = dataOrder;
|
||||
_dataMode = dataMode;
|
||||
_begun = false;
|
||||
_spiSetting = new SPISettings(freq, dataOrder, dataMode);
|
||||
_spi = NULL;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Initializes SPI bus and sets CS pin high
|
||||
* @return Always returns true because there's no way to test success of SPI init
|
||||
*/
|
||||
bool Adafruit_SPIDevice::begin(void) {
|
||||
pinMode(_cs, OUTPUT);
|
||||
digitalWrite(_cs, HIGH);
|
||||
|
||||
if (_spi) { // hardware SPI
|
||||
_spi->begin();
|
||||
} else {
|
||||
pinMode(_sck, OUTPUT);
|
||||
|
||||
if (_dataMode==SPI_MODE0) {
|
||||
digitalWrite(_sck, HIGH);
|
||||
} else {
|
||||
digitalWrite(_sck, LOW);
|
||||
}
|
||||
if (_mosi != -1) {
|
||||
pinMode(_mosi, OUTPUT);
|
||||
digitalWrite(_mosi, HIGH);
|
||||
}
|
||||
if (_miso != -1) {
|
||||
pinMode(_miso, INPUT);
|
||||
}
|
||||
}
|
||||
|
||||
_begun = true;
|
||||
return true;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Transfer (send/receive) one byte over hard/soft SPI
|
||||
* @param buffer The buffer to send and receive at the same time
|
||||
* @param len The number of bytes to transfer
|
||||
*/
|
||||
void Adafruit_SPIDevice::transfer(uint8_t *buffer, size_t len) {
|
||||
if (_spi) {
|
||||
// hardware SPI is easy
|
||||
_spi->transfer(buffer, len);
|
||||
return;
|
||||
}
|
||||
|
||||
// for softSPI we'll do it by hand
|
||||
for (size_t i=0; i<len; i++) {
|
||||
// software SPI
|
||||
uint8_t reply = 0;
|
||||
uint8_t send = buffer[i];
|
||||
|
||||
if (_dataOrder == SPI_BITORDER_LSBFIRST) {
|
||||
// LSB is rare, if it happens we'll just flip the bits around for them
|
||||
uint8_t temp = 0;
|
||||
for (uint8_t b=0; b<8; b++) {
|
||||
temp |= ((send >> b) & 0x1) << (7-b);
|
||||
}
|
||||
send = temp;
|
||||
}
|
||||
for (int b=7; b>=0; b--) {
|
||||
reply <<= 1;
|
||||
if (_dataMode == SPI_MODE0) {
|
||||
digitalWrite(_sck, LOW);
|
||||
digitalWrite(_mosi, send & (1<<b));
|
||||
digitalWrite(_sck, HIGH);
|
||||
if ((_miso != -1) && digitalRead(_miso)) {
|
||||
reply |= 1;
|
||||
}
|
||||
}
|
||||
if (_dataMode == SPI_MODE1) {
|
||||
digitalWrite(_sck, HIGH);
|
||||
digitalWrite(_mosi, send & (1<<b));
|
||||
digitalWrite(_sck, LOW);
|
||||
if ((_miso != -1) && digitalRead(_miso)) {
|
||||
reply |= 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (_dataOrder == SPI_BITORDER_LSBFIRST) {
|
||||
// LSB is rare, if it happens we'll just flip the bits around for them
|
||||
uint8_t temp = 0;
|
||||
for (uint8_t b=0; b<8; b++) {
|
||||
temp |= ((reply >> b) & 0x1) << (7-b);
|
||||
}
|
||||
reply = temp;
|
||||
}
|
||||
|
||||
buffer[i] = reply;
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Transfer (send/receive) one byte over hard/soft SPI
|
||||
* @param send The byte to send
|
||||
* @return The byte received while transmitting
|
||||
*/
|
||||
uint8_t Adafruit_SPIDevice::transfer(uint8_t send) {
|
||||
uint8_t data = send;
|
||||
transfer(&data, 1);
|
||||
return data;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Write a buffer or two to the SPI device.
|
||||
* @param buffer Pointer to buffer of data to write
|
||||
* @param len Number of bytes from buffer to write
|
||||
* @param prefix_buffer Pointer to optional array of data to write before buffer.
|
||||
* @param prefix_len Number of bytes from prefix buffer to write
|
||||
* @return Always returns true because there's no way to test success of SPI writes
|
||||
*/
|
||||
bool Adafruit_SPIDevice::write(uint8_t *buffer, size_t len, uint8_t *prefix_buffer, size_t prefix_len) {
|
||||
if (_spi) {
|
||||
_spi->beginTransaction(*_spiSetting);
|
||||
}
|
||||
|
||||
digitalWrite(_cs, LOW);
|
||||
// do the writing
|
||||
for (size_t i=0; i<prefix_len; i++) {
|
||||
transfer(prefix_buffer[i]);
|
||||
}
|
||||
for (size_t i=0; i<len; i++) {
|
||||
transfer(buffer[i]);
|
||||
}
|
||||
digitalWrite(_cs, HIGH);
|
||||
|
||||
if (_spi) {
|
||||
_spi->endTransaction();
|
||||
}
|
||||
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print(F("\tSPIDevice Wrote: "));
|
||||
if ((prefix_len != 0) && (prefix_buffer != NULL)) {
|
||||
for (uint16_t i=0; i<prefix_len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(prefix_buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
}
|
||||
}
|
||||
for (uint16_t i=0; i<len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
if (len % 32 == 31) {
|
||||
DEBUG_SERIAL.println();
|
||||
}
|
||||
}
|
||||
DEBUG_SERIAL.println();
|
||||
#endif
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read from SPI into a buffer from the SPI device.
|
||||
* @param buffer Pointer to buffer of data to read into
|
||||
* @param len Number of bytes from buffer to read.
|
||||
* @param sendvalue The 8-bits of data to write when doing the data read, defaults to 0xFF
|
||||
* @return Always returns true because there's no way to test success of SPI writes
|
||||
*/
|
||||
bool Adafruit_SPIDevice::read(uint8_t *buffer, size_t len, uint8_t sendvalue) {
|
||||
memset(buffer, sendvalue, len); // clear out existing buffer
|
||||
if (_spi) {
|
||||
_spi->beginTransaction(*_spiSetting);
|
||||
}
|
||||
digitalWrite(_cs, LOW);
|
||||
transfer(buffer, len);
|
||||
digitalWrite(_cs, HIGH);
|
||||
|
||||
if (_spi) {
|
||||
_spi->endTransaction();
|
||||
}
|
||||
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print(F("\tSPIDevice Read: "));
|
||||
for (uint16_t i=0; i<len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
if (len % 32 == 31) {
|
||||
DEBUG_SERIAL.println();
|
||||
}
|
||||
}
|
||||
DEBUG_SERIAL.println();
|
||||
#endif
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Write some data, then read some data from SPI into another buffer. The buffers can point to same/overlapping locations. This does not transmit-receive at the same time!
|
||||
* @param write_buffer Pointer to buffer of data to write from
|
||||
* @param write_len Number of bytes from buffer to write.
|
||||
* @param read_buffer Pointer to buffer of data to read into.
|
||||
* @param read_len Number of bytes from buffer to read.
|
||||
* @param sendvalue The 8-bits of data to write when doing the data read, defaults to 0xFF
|
||||
* @return Always returns true because there's no way to test success of SPI writes
|
||||
*/
|
||||
bool Adafruit_SPIDevice::write_then_read(uint8_t *write_buffer, size_t write_len, uint8_t *read_buffer, size_t read_len, uint8_t sendvalue) {
|
||||
if (_spi) {
|
||||
_spi->beginTransaction(*_spiSetting);
|
||||
}
|
||||
|
||||
digitalWrite(_cs, LOW);
|
||||
// do the writing
|
||||
for (size_t i=0; i<write_len; i++) {
|
||||
transfer(write_buffer[i]);
|
||||
}
|
||||
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print(F("\tSPIDevice Wrote: "));
|
||||
for (uint16_t i=0; i<write_len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(write_buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
if (write_len % 32 == 31) {
|
||||
DEBUG_SERIAL.println();
|
||||
}
|
||||
}
|
||||
DEBUG_SERIAL.println();
|
||||
#endif
|
||||
|
||||
// do the reading
|
||||
for (size_t i=0; i<read_len; i++) {
|
||||
read_buffer[i] = transfer(sendvalue);
|
||||
}
|
||||
|
||||
#ifdef DEBUG_SERIAL
|
||||
DEBUG_SERIAL.print(F("\tSPIDevice Read: "));
|
||||
for (uint16_t i=0; i<read_len; i++) {
|
||||
DEBUG_SERIAL.print(F("0x"));
|
||||
DEBUG_SERIAL.print(read_buffer[i], HEX);
|
||||
DEBUG_SERIAL.print(F(", "));
|
||||
if (read_len % 32 == 31) {
|
||||
DEBUG_SERIAL.println();
|
||||
}
|
||||
}
|
||||
DEBUG_SERIAL.println();
|
||||
#endif
|
||||
|
||||
digitalWrite(_cs, HIGH);
|
||||
|
||||
if (_spi) {
|
||||
_spi->endTransaction();
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
#include <SPI.h>
|
||||
|
||||
#ifndef Adafruit_SPIDevice_h
|
||||
#define Adafruit_SPIDevice_h
|
||||
|
||||
// some modern SPI definitions don't have BitOrder enum
|
||||
#if (defined(__AVR__) && !defined(ARDUINO_ARCH_MEGAAVR)) || defined(ESP8266) || defined(TEENSYDUINO)
|
||||
typedef enum _BitOrder {
|
||||
SPI_BITORDER_MSBFIRST = MSBFIRST,
|
||||
SPI_BITORDER_LSBFIRST = LSBFIRST,
|
||||
} BitOrder;
|
||||
#endif
|
||||
|
||||
// some modern SPI definitions don't have BitOrder enum and have different SPI mode defines
|
||||
#if defined(ESP32)
|
||||
typedef enum _BitOrder {
|
||||
SPI_BITORDER_MSBFIRST = SPI_MSBFIRST,
|
||||
SPI_BITORDER_LSBFIRST = SPI_LSBFIRST,
|
||||
} BitOrder;
|
||||
#endif
|
||||
|
||||
// Some platforms have a BitOrder enum but its named MSBFIRST/LSBFIRST
|
||||
#if defined(ARDUINO_ARCH_SAMD) || defined(__SAM3X8E__) || defined(NRF52_SERIES) || defined(ARDUINO_ARCH_ARDUINO_CORE_STM32) || defined(ARDUINO_ARCH_MEGAAVR) || defined(_STM32_DEF_)
|
||||
#define SPI_BITORDER_MSBFIRST MSBFIRST
|
||||
#define SPI_BITORDER_LSBFIRST LSBFIRST
|
||||
#endif
|
||||
|
||||
///< The class which defines how we will talk to this device over SPI
|
||||
class Adafruit_SPIDevice {
|
||||
public:
|
||||
Adafruit_SPIDevice(int8_t cspin,
|
||||
uint32_t freq=1000000,
|
||||
BitOrder dataOrder=SPI_BITORDER_MSBFIRST,
|
||||
uint8_t dataMode=SPI_MODE0,
|
||||
SPIClass *theSPI=&SPI);
|
||||
|
||||
Adafruit_SPIDevice(int8_t cspin, int8_t sck, int8_t miso, int8_t mosi,
|
||||
uint32_t freq=1000000,
|
||||
BitOrder dataOrder=SPI_BITORDER_MSBFIRST,
|
||||
uint8_t dataMode=SPI_MODE0);
|
||||
|
||||
bool begin(void);
|
||||
bool read(uint8_t *buffer, size_t len, uint8_t sendvalue=0xFF);
|
||||
bool write(uint8_t *buffer, size_t len, uint8_t *prefix_buffer=NULL, size_t prefix_len=0);
|
||||
bool write_then_read(uint8_t *write_buffer, size_t write_len, uint8_t *read_buffer, size_t read_len, uint8_t sendvalue=0xFF);
|
||||
|
||||
uint8_t transfer(uint8_t send);
|
||||
void transfer(uint8_t *buffer, size_t len);
|
||||
|
||||
private:
|
||||
|
||||
SPIClass *_spi;
|
||||
SPISettings *_spiSetting;
|
||||
uint32_t _freq;
|
||||
BitOrder _dataOrder;
|
||||
uint8_t _dataMode;
|
||||
|
||||
int8_t _cs, _sck, _mosi, _miso;
|
||||
bool _begun;
|
||||
};
|
||||
|
||||
#endif // Adafruit_SPIDevice_h
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
The MIT License (MIT)
|
||||
|
||||
Copyright (c) 2017 Adafruit Industries
|
||||
|
||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
of this software and associated documentation files (the "Software"), to deal
|
||||
in the Software without restriction, including without limitation the rights
|
||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
copies of the Software, and to permit persons to whom the Software is
|
||||
furnished to do so, subject to the following conditions:
|
||||
|
||||
The above copyright notice and this permission notice shall be included in all
|
||||
copies or substantial portions of the Software.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
SOFTWARE.
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
# Adafruit Bus IO Library [](https://travis-ci.com/adafruit/Adafruit_BusIO)
|
||||
|
||||
This is a helper libary to abstract away I2C & SPI transactions and registers
|
||||
|
||||
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
|
||||
|
||||
MIT license, all text above must be included in any redistribution
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
#include <Adafruit_I2CDevice.h>
|
||||
|
||||
Adafruit_I2CDevice i2c_dev = Adafruit_I2CDevice(0x10);
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("I2C address detection test");
|
||||
|
||||
if (!i2c_dev.begin()) {
|
||||
Serial.print("Did not find device at 0x");
|
||||
Serial.println(i2c_dev.address(), HEX);
|
||||
while (1);
|
||||
}
|
||||
Serial.print("Device found on address 0x");
|
||||
Serial.println(i2c_dev.address(), HEX);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
#include <Adafruit_I2CDevice.h>
|
||||
|
||||
#define I2C_ADDRESS 0x60
|
||||
Adafruit_I2CDevice i2c_dev = Adafruit_I2CDevice(I2C_ADDRESS);
|
||||
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("I2C device read and write test");
|
||||
|
||||
if (!i2c_dev.begin()) {
|
||||
Serial.print("Did not find device at 0x");
|
||||
Serial.println(i2c_dev.address(), HEX);
|
||||
while (1);
|
||||
}
|
||||
Serial.print("Device found on address 0x");
|
||||
Serial.println(i2c_dev.address(), HEX);
|
||||
|
||||
uint8_t buffer[32];
|
||||
// Try to read 32 bytes
|
||||
i2c_dev.read(buffer, 32);
|
||||
Serial.print("Read: ");
|
||||
for (uint8_t i=0; i<32; i++) {
|
||||
Serial.print("0x"); Serial.print(buffer[i], HEX); Serial.print(", ");
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
// read a register by writing first, then reading
|
||||
buffer[0] = 0x0C; // we'll reuse the same buffer
|
||||
i2c_dev.write_then_read(buffer, 1, buffer, 2, false);
|
||||
Serial.print("Write then Read: ");
|
||||
for (uint8_t i=0; i<2; i++) {
|
||||
Serial.print("0x"); Serial.print(buffer[i], HEX); Serial.print(", ");
|
||||
}
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
#include <Adafruit_I2CDevice.h>
|
||||
#include <Adafruit_BusIO_Register.h>
|
||||
|
||||
#define I2C_ADDRESS 0x60
|
||||
Adafruit_I2CDevice i2c_dev = Adafruit_I2CDevice(I2C_ADDRESS);
|
||||
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("I2C device register test");
|
||||
|
||||
if (!i2c_dev.begin()) {
|
||||
Serial.print("Did not find device at 0x");
|
||||
Serial.println(i2c_dev.address(), HEX);
|
||||
while (1);
|
||||
}
|
||||
Serial.print("Device found on address 0x");
|
||||
Serial.println(i2c_dev.address(), HEX);
|
||||
|
||||
Adafruit_BusIO_Register id_reg = Adafruit_BusIO_Register(&i2c_dev, 0x0C, 2, LSBFIRST);
|
||||
uint16_t id;
|
||||
id_reg.read(&id);
|
||||
Serial.print("ID register = 0x"); Serial.println(id, HEX);
|
||||
|
||||
Adafruit_BusIO_Register thresh_reg = Adafruit_BusIO_Register(&i2c_dev, 0x01, 2, LSBFIRST);
|
||||
uint16_t thresh;
|
||||
thresh_reg.read(&thresh);
|
||||
Serial.print("Initial threshold register = 0x"); Serial.println(thresh, HEX);
|
||||
|
||||
thresh_reg.write(~thresh);
|
||||
|
||||
Serial.print("Post threshold register = 0x"); Serial.println(thresh_reg.read(), HEX);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
#include <Adafruit_BusIO_Register.h>
|
||||
|
||||
// Define which interface to use by setting the unused interface to NULL!
|
||||
|
||||
#define SPIDEVICE_CS 10
|
||||
Adafruit_SPIDevice *spi_dev = NULL; // new Adafruit_SPIDevice(SPIDEVICE_CS);
|
||||
|
||||
#define I2C_ADDRESS 0x5D
|
||||
Adafruit_I2CDevice *i2c_dev = new Adafruit_I2CDevice(I2C_ADDRESS);
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("I2C or SPI device register test");
|
||||
|
||||
if (spi_dev && !spi_dev->begin()) {
|
||||
Serial.println("Could not initialize SPI device");
|
||||
}
|
||||
|
||||
if (i2c_dev) {
|
||||
if (i2c_dev->begin()) {
|
||||
Serial.print("Device found on I2C address 0x");
|
||||
Serial.println(i2c_dev->address(), HEX);
|
||||
} else {
|
||||
Serial.print("Did not find I2C device at 0x");
|
||||
Serial.println(i2c_dev->address(), HEX);
|
||||
}
|
||||
}
|
||||
|
||||
Adafruit_BusIO_Register id_reg = Adafruit_BusIO_Register(i2c_dev, spi_dev, ADDRBIT8_HIGH_TOREAD, 0x0F);
|
||||
uint8_t id;
|
||||
id_reg.read(&id);
|
||||
Serial.print("ID register = 0x"); Serial.println(id, HEX);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
#include <Adafruit_SPIDevice.h>
|
||||
|
||||
#define SPIDEVICE_CS 10
|
||||
Adafruit_SPIDevice spi_dev = Adafruit_SPIDevice(SPIDEVICE_CS, 100000, SPI_BITORDER_MSBFIRST, SPI_MODE1);
|
||||
//Adafruit_SPIDevice spi_dev = Adafruit_SPIDevice(SPIDEVICE_CS, 13, 12, 11, 100000, SPI_BITORDER_MSBFIRST, SPI_MODE1);
|
||||
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("SPI device mode test");
|
||||
|
||||
if (!spi_dev.begin()) {
|
||||
Serial.println("Could not initialize SPI device");
|
||||
while (1);
|
||||
}
|
||||
}
|
||||
|
||||
void loop() {
|
||||
Serial.println("\n\nTransfer test");
|
||||
for (uint16_t x=0; x<=0xFF; x++) {
|
||||
uint8_t i = x;
|
||||
Serial.print("0x"); Serial.print(i, HEX);
|
||||
spi_dev.read(&i, 1, i);
|
||||
Serial.print("/"); Serial.print(i, HEX);
|
||||
Serial.print(", ");
|
||||
delay(25);
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
#include <Adafruit_SPIDevice.h>
|
||||
|
||||
#define SPIDEVICE_CS 10
|
||||
Adafruit_SPIDevice spi_dev = Adafruit_SPIDevice(SPIDEVICE_CS);
|
||||
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("SPI device read and write test");
|
||||
|
||||
if (!spi_dev.begin()) {
|
||||
Serial.println("Could not initialize SPI device");
|
||||
while (1);
|
||||
}
|
||||
|
||||
uint8_t buffer[32];
|
||||
|
||||
// Try to read 32 bytes
|
||||
spi_dev.read(buffer, 32);
|
||||
Serial.print("Read: ");
|
||||
for (uint8_t i=0; i<32; i++) {
|
||||
Serial.print("0x"); Serial.print(buffer[i], HEX); Serial.print(", ");
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
// read a register by writing first, then reading
|
||||
buffer[0] = 0x8F; // we'll reuse the same buffer
|
||||
spi_dev.write_then_read(buffer, 1, buffer, 2, false);
|
||||
Serial.print("Write then Read: ");
|
||||
for (uint8_t i=0; i<2; i++) {
|
||||
Serial.print("0x"); Serial.print(buffer[i], HEX); Serial.print(", ");
|
||||
}
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
#include <Adafruit_BusIO_Register.h>
|
||||
#include <Adafruit_SPIDevice.h>
|
||||
|
||||
#define SPIDEVICE_CS 10
|
||||
Adafruit_SPIDevice spi_dev = Adafruit_SPIDevice(SPIDEVICE_CS);
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("SPI device register test");
|
||||
|
||||
if (!spi_dev.begin()) {
|
||||
Serial.println("Could not initialize SPI device");
|
||||
while (1);
|
||||
}
|
||||
|
||||
Adafruit_BusIO_Register id_reg = Adafruit_BusIO_Register(&spi_dev, 0x0F, ADDRBIT8_HIGH_TOREAD);
|
||||
uint8_t id;
|
||||
id_reg.read(&id);
|
||||
Serial.print("ID register = 0x"); Serial.println(id, HEX);
|
||||
|
||||
Adafruit_BusIO_Register thresh_reg = Adafruit_BusIO_Register(&spi_dev, 0x0C, ADDRBIT8_HIGH_TOREAD, 2, LSBFIRST);
|
||||
uint16_t thresh;
|
||||
thresh_reg.read(&thresh);
|
||||
Serial.print("Initial threshold register = 0x"); Serial.println(thresh, HEX);
|
||||
|
||||
thresh_reg.write(~thresh);
|
||||
|
||||
Serial.print("Post threshold register = 0x"); Serial.println(thresh_reg.read(), HEX);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
name=Adafruit BusIO
|
||||
version=1.0.10
|
||||
author=Adafruit
|
||||
maintainer=Adafruit <info@adafruit.com>
|
||||
sentence=This is a library for abstracting away UART, I2C and SPI interfacing
|
||||
paragraph=This is a library for abstracting away UART, I2C and SPI interfacing
|
||||
category=Signal Input/Output
|
||||
url=https://github.com/adafruit/Adafruit_BusIO
|
||||
architectures=*
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
Thank you for opening an issue on an Adafruit Arduino library repository. To
|
||||
improve the speed of resolution please review the following guidelines and
|
||||
common troubleshooting steps below before creating the issue:
|
||||
|
||||
- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use
|
||||
the forums at http://forums.adafruit.com to ask questions and troubleshoot why
|
||||
something isn't working as expected. In many cases the problem is a common issue
|
||||
that you will more quickly receive help from the forum community. GitHub issues
|
||||
are meant for known defects in the code. If you don't know if there is a defect
|
||||
in the code then start with troubleshooting on the forum first.
|
||||
|
||||
- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
|
||||
check all of the steps and commands to run have been followed. Consult the
|
||||
forum if you're unsure or have questions about steps in a guide/tutorial.
|
||||
|
||||
- **For Arduino projects check these very common issues to ensure they don't apply**:
|
||||
|
||||
- For uploading sketches or communicating with the board make sure you're using
|
||||
a **USB data cable** and **not** a **USB charge-only cable**. It is sometimes
|
||||
very hard to tell the difference between a data and charge cable! Try using the
|
||||
cable with other devices or swapping to another cable to confirm it is not
|
||||
the problem.
|
||||
|
||||
- **Be sure you are supplying adequate power to the board.** Check the specs of
|
||||
your board and plug in an external power supply. In many cases just
|
||||
plugging a board into your computer is not enough to power it and other
|
||||
peripherals.
|
||||
|
||||
- **Double check all soldering joints and connections.** Flakey connections
|
||||
cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
|
||||
|
||||
- **Ensure you are using an official Arduino or Adafruit board.** We can't
|
||||
guarantee a clone board will have the same functionality and work as expected
|
||||
with this code and don't support them.
|
||||
|
||||
If you're sure this issue is a defect in the code and checked the steps above
|
||||
please fill in the following fields to provide enough troubleshooting information.
|
||||
You may delete the guideline and text above to just leave the following details:
|
||||
|
||||
- Arduino board: **INSERT ARDUINO BOARD NAME/TYPE HERE**
|
||||
|
||||
- Arduino IDE version (found in Arduino -> About Arduino menu): **INSERT ARDUINO
|
||||
VERSION HERE**
|
||||
|
||||
- List the steps to reproduce the problem below (if possible attach a sketch or
|
||||
copy the sketch code in too): **LIST REPRO STEPS BELOW**
|
||||
|
|
@ -0,0 +1,26 @@
|
|||
Thank you for creating a pull request to contribute to Adafruit's GitHub code!
|
||||
Before you open the request please review the following guidelines and tips to
|
||||
help it be more easily integrated:
|
||||
|
||||
- **Describe the scope of your change--i.e. what the change does and what parts
|
||||
of the code were modified.** This will help us understand any risks of integrating
|
||||
the code.
|
||||
|
||||
- **Describe any known limitations with your change.** For example if the change
|
||||
doesn't apply to a supported platform of the library please mention it.
|
||||
|
||||
- **Please run any tests or examples that can exercise your modified code.** We
|
||||
strive to not break users of the code and running tests/examples helps with this
|
||||
process.
|
||||
|
||||
Thank you again for contributing! We will try to test and integrate the change
|
||||
as soon as we can, but be aware we have many GitHub repositories to manage and
|
||||
can't immediately respond to every request. There is no need to bump or check in
|
||||
on a pull request (it will clutter the discussion of the request).
|
||||
|
||||
Also don't be worried if the request is closed or not integrated--sometimes the
|
||||
priorities of Adafruit's GitHub code (education, ease of use) might not match the
|
||||
priorities of the pull request. Don't fret, the open source community thrives on
|
||||
forks and GitHub makes it easy to keep your changes in a forked repo.
|
||||
|
||||
After reviewing the guidelines above you can delete this text from the pull request.
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
# osx
|
||||
.DS_Store
|
||||
|
||||
# doxygen
|
||||
Doxyfile*
|
||||
doxygen_sqlite3.db
|
||||
html
|
||||
*.tmp
|
||||
|
|
@ -0,0 +1,26 @@
|
|||
language: c
|
||||
sudo: false
|
||||
cache:
|
||||
directories:
|
||||
- ~/arduino_ide
|
||||
- ~/.arduino15/packages/
|
||||
git:
|
||||
depth: false
|
||||
quiet: true
|
||||
env:
|
||||
global:
|
||||
- PRETTYNAME="Adafruit VEML7700 Arduino Library"
|
||||
|
||||
before_install:
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/install.sh)
|
||||
|
||||
install:
|
||||
- arduino --install-library "Adafruit BusIO"
|
||||
|
||||
script:
|
||||
- build_main_platforms
|
||||
|
||||
# Generate and deploy documentation
|
||||
after_success:
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/library_check.sh)
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/doxy_gen_and_deploy.sh)
|
||||
|
|
@ -0,0 +1,322 @@
|
|||
/*!
|
||||
* @file Adafruit_VEML7700.cpp
|
||||
*
|
||||
* @mainpage Adafruit VEML7700 I2C Lux Sensor
|
||||
*
|
||||
* @section intro_sec Introduction
|
||||
*
|
||||
* I2C Driver for the VEML7700 I2C Lux sensor
|
||||
*
|
||||
* This is a library for the Adafruit VEML7700 breakout:
|
||||
* http://www.adafruit.com/
|
||||
*
|
||||
* Adafruit invests time and resources providing this open source code,
|
||||
* please support Adafruit and open-source hardware by purchasing products from
|
||||
* Adafruit!
|
||||
*
|
||||
* @section author Author
|
||||
*
|
||||
* Limor Fried (Adafruit Industries)
|
||||
*
|
||||
* @section license License
|
||||
*
|
||||
* BSD (see license.txt)
|
||||
*
|
||||
* @section HISTORY
|
||||
*
|
||||
* v1.0 - First release
|
||||
*/
|
||||
|
||||
#include "Arduino.h"
|
||||
#include <Wire.h>
|
||||
|
||||
#include "Adafruit_VEML7700.h"
|
||||
|
||||
/*!
|
||||
* @brief Instantiates a new VEML7700 class
|
||||
*/
|
||||
Adafruit_VEML7700::Adafruit_VEML7700(void) {}
|
||||
|
||||
/*!
|
||||
* @brief Setups the hardware for talking to the VEML7700
|
||||
* @param theWire An optional pointer to an I2C interface
|
||||
* @return True if initialization was successful, otherwise false.
|
||||
*/
|
||||
boolean Adafruit_VEML7700::begin(TwoWire *theWire) {
|
||||
i2c_dev = new Adafruit_I2CDevice(VEML7700_I2CADDR_DEFAULT, theWire);
|
||||
|
||||
if (!i2c_dev->begin()) {
|
||||
return false;
|
||||
}
|
||||
|
||||
ALS_Config = new Adafruit_I2CRegister(i2c_dev, VEML7700_ALS_CONFIG, 2, LSBFIRST);
|
||||
ALS_HighThreshold = new Adafruit_I2CRegister(i2c_dev, VEML7700_ALS_THREHOLD_HIGH, 2, LSBFIRST);
|
||||
ALS_LowThreshold = new Adafruit_I2CRegister(i2c_dev, VEML7700_ALS_THREHOLD_LOW, 2, LSBFIRST);
|
||||
Power_Saving = new Adafruit_I2CRegister(i2c_dev, VEML7700_ALS_POWER_SAVE, 2, LSBFIRST);
|
||||
ALS_Data = new Adafruit_I2CRegister(i2c_dev, VEML7700_ALS_DATA, 2, LSBFIRST);
|
||||
White_Data = new Adafruit_I2CRegister(i2c_dev, VEML7700_WHITE_DATA, 2, LSBFIRST);
|
||||
Interrupt_Status = new Adafruit_I2CRegister(i2c_dev, VEML7700_INTERRUPTSTATUS, 2, LSBFIRST);
|
||||
|
||||
ALS_Shutdown = new Adafruit_I2CRegisterBits(ALS_Config, 1, 0); // # bits, bit_shift
|
||||
ALS_Interrupt_Enable = new Adafruit_I2CRegisterBits(ALS_Config, 1, 1);
|
||||
ALS_Persistence = new Adafruit_I2CRegisterBits(ALS_Config, 2, 4);
|
||||
ALS_Integration_Time = new Adafruit_I2CRegisterBits(ALS_Config, 4, 6);
|
||||
ALS_Gain = new Adafruit_I2CRegisterBits(ALS_Config, 2, 11);
|
||||
PowerSave_Enable = new Adafruit_I2CRegisterBits(Power_Saving, 1, 0);
|
||||
PowerSave_Mode = new Adafruit_I2CRegisterBits(Power_Saving, 2, 1);
|
||||
|
||||
enable(false);
|
||||
interruptEnable(false);
|
||||
setPersistence(VEML7700_PERS_1);
|
||||
setGain(VEML7700_GAIN_1);
|
||||
setIntegrationTime(VEML7700_IT_100MS);
|
||||
powerSaveEnable(false);
|
||||
enable(true);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
|
||||
float Adafruit_VEML7700::normalize_resolution(float value) {
|
||||
// adjust for gain (1x is normalized)
|
||||
switch (getGain()) {
|
||||
case VEML7700_GAIN_2:
|
||||
value /= 2.0; break;
|
||||
case VEML7700_GAIN_1_4:
|
||||
value *= 4; break;
|
||||
case VEML7700_GAIN_1_8:
|
||||
value *= 8; break;
|
||||
}
|
||||
|
||||
// adjust for integrationtime (100ms is normalized)
|
||||
switch (getIntegrationTime()) {
|
||||
case VEML7700_IT_25MS:
|
||||
value *= 4; break;
|
||||
case VEML7700_IT_50MS:
|
||||
value *= 2; break;
|
||||
case VEML7700_IT_200MS:
|
||||
value /= 2.0; break;
|
||||
case VEML7700_IT_400MS:
|
||||
value /= 4.0; break;
|
||||
case VEML7700_IT_800MS:
|
||||
value /= 8.0; break;
|
||||
}
|
||||
|
||||
return value;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read the calibrated lux value. See app note lux table on page 5
|
||||
* @returns Floating point Lux data (ALS multiplied by 0.0576)
|
||||
*/
|
||||
float Adafruit_VEML7700::readLux() {
|
||||
return ( normalize_resolution(ALS_Data->read()) * 0.0576); // see app note lux table on page 5
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read the lux value with correction for non-linearity at high-lux settings
|
||||
* @returns Floating point Lux data (ALS multiplied by 0.0576 and corrected for high-lux settings)
|
||||
*/
|
||||
float Adafruit_VEML7700::readLuxNormalized() {
|
||||
float lux = readLux();
|
||||
|
||||
// user-provided correction for non-linearities at high lux/white values:
|
||||
// https://forums.adafruit.com/viewtopic.php?f=19&t=152997&p=758582#p759346
|
||||
if ((getGain() == VEML7700_GAIN_1_8) && (getIntegrationTime() == VEML7700_IT_25MS)){
|
||||
lux = 6.0135e-13*pow(lux,4) - 9.3924e-9*pow(lux,3) + 8.1488e-5*pow(lux,2) + 1.0023*lux;
|
||||
}
|
||||
|
||||
return lux;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read the raw ALS data
|
||||
* @returns 16-bit data value from the ALS register
|
||||
*/
|
||||
uint16_t Adafruit_VEML7700::readALS() {
|
||||
return ALS_Data->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read the white light data
|
||||
* @returns Floating point 'white light' data multiplied by 0.0576
|
||||
*/
|
||||
float Adafruit_VEML7700::readWhite() {
|
||||
// white_corrected= 2E-15*pow(VEML_white,4) + 4E-12*pow(VEML_white,3) + 9E-06*pow(VEML_white,)2 + 1.0179*VEML_white - 11.052;
|
||||
return normalize_resolution(White_Data->read()) * 0.0576; // Unclear if this is the right multiplier
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Read the 'white light' value with correction for non-linearity at high-lux settings
|
||||
* @returns Floating point 'white light' data multiplied by 0.0576 and corrected for high-lux settings
|
||||
*/
|
||||
float Adafruit_VEML7700::readWhiteNormalized() {
|
||||
float white = readWhite();
|
||||
|
||||
// user-provided correction for non-linearities at high lux values:
|
||||
// https://forums.adafruit.com/viewtopic.php?f=19&t=152997&p=758582#p759346
|
||||
if ((getGain() == VEML7700_GAIN_1_8) && (getIntegrationTime() == VEML7700_IT_25MS)){
|
||||
white = 2E-15*pow(white,4) + 4E-12*pow(white,3) + 9E-06*pow(white,2) + 1.0179*white - 11.052;
|
||||
}
|
||||
|
||||
return white;
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Enable or disable the sensor
|
||||
* @param enable The flag to enable/disable
|
||||
*/
|
||||
void Adafruit_VEML7700::enable(bool enable) {
|
||||
ALS_Shutdown->write(!enable);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Ask if the interrupt is enabled
|
||||
* @returns True if enabled, false otherwise
|
||||
*/
|
||||
bool Adafruit_VEML7700::enabled(void) {
|
||||
return !ALS_Shutdown->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Enable or disable the interrupt
|
||||
* @param enable The flag to enable/disable
|
||||
*/
|
||||
void Adafruit_VEML7700::interruptEnable(bool enable) {
|
||||
ALS_Interrupt_Enable->write(enable);
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Ask if the interrupt is enabled
|
||||
* @returns True if enabled, false otherwise
|
||||
*/
|
||||
bool Adafruit_VEML7700::interruptEnabled(void) {
|
||||
return ALS_Interrupt_Enable->read();
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Set the ALS IRQ persistance setting
|
||||
* @param pers Persistance constant, can be VEML7700_PERS_1, VEML7700_PERS_2,
|
||||
* VEML7700_PERS_4 or VEML7700_PERS_8
|
||||
*/
|
||||
void Adafruit_VEML7700::setPersistence(uint8_t pers) {
|
||||
ALS_Persistence->write(pers);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Get the ALS IRQ persistance setting
|
||||
* @returns Persistance constant, can be VEML7700_PERS_1, VEML7700_PERS_2,
|
||||
* VEML7700_PERS_4 or VEML7700_PERS_8
|
||||
*/
|
||||
uint8_t Adafruit_VEML7700::getPersistence(void) {
|
||||
return ALS_Persistence->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Set ALS integration time
|
||||
* @param it Can be VEML7700_IT_100MS, VEML7700_IT_200MS, VEML7700_IT_400MS,
|
||||
* VEML7700_IT_800MS, VEML7700_IT_50MS or VEML7700_IT_25MS
|
||||
*/
|
||||
void Adafruit_VEML7700::setIntegrationTime(uint8_t it) {
|
||||
ALS_Integration_Time->write(it);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Get ALS integration time
|
||||
* @returns IT index, can be VEML7700_IT_100MS, VEML7700_IT_200MS, VEML7700_IT_400MS,
|
||||
* VEML7700_IT_800MS, VEML7700_IT_50MS or VEML7700_IT_25MS
|
||||
*/
|
||||
uint8_t Adafruit_VEML7700::getIntegrationTime(void) {
|
||||
return ALS_Integration_Time->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Set ALS gain
|
||||
* @param gain Can be VEML7700_GAIN_1, VEML7700_GAIN_2, VEML7700_GAIN_1_8 or VEML7700_GAIN_1_4
|
||||
*/
|
||||
void Adafruit_VEML7700::setGain(uint8_t gain) {
|
||||
ALS_Gain->write(gain);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Get ALS gain
|
||||
* @returns Gain index, can be VEML7700_GAIN_1, VEML7700_GAIN_2, VEML7700_GAIN_1_8 or VEML7700_GAIN_1_4
|
||||
*/
|
||||
uint8_t Adafruit_VEML7700::getGain(void) {
|
||||
return ALS_Gain->read();
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Enable power save mode
|
||||
* @param enable True if power save should be enabled
|
||||
*/
|
||||
void Adafruit_VEML7700::powerSaveEnable(bool enable) {
|
||||
PowerSave_Enable->write(enable);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Check if power save mode is enabled
|
||||
* @returns True if power save is enabled
|
||||
*/
|
||||
bool Adafruit_VEML7700::powerSaveEnabled(void) {
|
||||
return PowerSave_Enable->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Assign the power save register data
|
||||
* @param mode The 16-bit data to write to VEML7700_ALS_POWER_SAVE
|
||||
*/
|
||||
void Adafruit_VEML7700::setPowerSaveMode(uint8_t mode) {
|
||||
PowerSave_Mode->write(mode);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Retrieve the power save register data
|
||||
* @return 16-bit data from VEML7700_ALS_POWER_SAVE
|
||||
*/
|
||||
uint8_t Adafruit_VEML7700::getPowerSaveMode(void) {
|
||||
return PowerSave_Mode->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Assign the low threshold register data
|
||||
* @param value The 16-bit data to write to VEML7700_ALS_THREHOLD_LOW
|
||||
*/
|
||||
void Adafruit_VEML7700::setLowThreshold(uint16_t value) {
|
||||
ALS_LowThreshold->write(value);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Retrieve the low threshold register data
|
||||
* @return 16-bit data from VEML7700_ALS_THREHOLD_LOW
|
||||
*/
|
||||
uint16_t Adafruit_VEML7700::getLowThreshold(void) {
|
||||
return ALS_LowThreshold->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Assign the high threshold register data
|
||||
* @param value The 16-bit data to write to VEML7700_ALS_THREHOLD_HIGH
|
||||
*/
|
||||
void Adafruit_VEML7700::setHighThreshold(uint16_t value) {
|
||||
ALS_HighThreshold->write(value);
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Retrieve the high threshold register data
|
||||
* @return 16-bit data from VEML7700_ALS_THREHOLD_HIGH
|
||||
*/
|
||||
uint16_t Adafruit_VEML7700::getHighThreshold(void) {
|
||||
return ALS_HighThreshold->read();
|
||||
}
|
||||
|
||||
/*!
|
||||
* @brief Retrieve the interrupt status register data
|
||||
* @return 16-bit data from VEML7700_INTERRUPTSTATUS
|
||||
*/
|
||||
uint16_t Adafruit_VEML7700::interruptStatus(void) {
|
||||
return Interrupt_Status->read();
|
||||
}
|
||||
|
|
@ -0,0 +1,113 @@
|
|||
/*!
|
||||
* @file Adafruit_VEML7700.h
|
||||
*
|
||||
* I2C Driver for VEML7700 Lux sensor
|
||||
*
|
||||
* This is a library for the Adafruit VEML7700 breakout:
|
||||
* http://www.adafruit.com/
|
||||
*
|
||||
* Adafruit invests time and resources providing this open source code,
|
||||
*please support Adafruit and open-source hardware by purchasing products from
|
||||
* Adafruit!
|
||||
*
|
||||
*
|
||||
* BSD license (see license.txt)
|
||||
*/
|
||||
|
||||
#ifndef _ADAFRUIT_VEML7700_H
|
||||
#define _ADAFRUIT_VEML7700_H
|
||||
|
||||
#include "Arduino.h"
|
||||
#include <Wire.h>
|
||||
#include <Adafruit_I2CDevice.h>
|
||||
#include <Adafruit_I2CRegister.h>
|
||||
|
||||
#define VEML7700_I2CADDR_DEFAULT 0x10 ///< I2C address
|
||||
|
||||
#define VEML7700_ALS_CONFIG 0x00 ///< Light configuration register
|
||||
#define VEML7700_ALS_THREHOLD_HIGH 0x01 ///< Light high threshold for irq
|
||||
#define VEML7700_ALS_THREHOLD_LOW 0x02 ///< Light low threshold for irq
|
||||
#define VEML7700_ALS_POWER_SAVE 0x03 ///< Power save regiester
|
||||
#define VEML7700_ALS_DATA 0x04 ///< The light data output
|
||||
#define VEML7700_WHITE_DATA 0x05 ///< The white light data output
|
||||
#define VEML7700_INTERRUPTSTATUS 0x06 ///< What IRQ (if any)
|
||||
|
||||
#define VEML7700_INTERRUPT_HIGH 0x4000 ///< Interrupt status for high threshold
|
||||
#define VEML7700_INTERRUPT_LOW 0x8000 ///< Interrupt status for low threshold
|
||||
|
||||
#define VEML7700_GAIN_1 0x00 ///< ALS gain 1x
|
||||
#define VEML7700_GAIN_2 0x01 ///< ALS gain 2x
|
||||
#define VEML7700_GAIN_1_8 0x02 ///< ALS gain 1/8x
|
||||
#define VEML7700_GAIN_1_4 0x03 ///< ALS gain 1/4x
|
||||
|
||||
#define VEML7700_IT_100MS 0x00 ///< ALS intetgration time 100ms
|
||||
#define VEML7700_IT_200MS 0x01 ///< ALS intetgration time 200ms
|
||||
#define VEML7700_IT_400MS 0x02 ///< ALS intetgration time 400ms
|
||||
#define VEML7700_IT_800MS 0x03 ///< ALS intetgration time 800ms
|
||||
#define VEML7700_IT_50MS 0x08 ///< ALS intetgration time 50ms
|
||||
#define VEML7700_IT_25MS 0x0C ///< ALS intetgration time 25ms
|
||||
|
||||
#define VEML7700_PERS_1 0x00 ///< ALS irq persisance 1 sample
|
||||
#define VEML7700_PERS_2 0x01 ///< ALS irq persisance 2 samples
|
||||
#define VEML7700_PERS_4 0x02 ///< ALS irq persisance 4 samples
|
||||
#define VEML7700_PERS_8 0x03 ///< ALS irq persisance 8 samples
|
||||
|
||||
#define VEML7700_POWERSAVE_MODE1 0x00 ///< Power saving mode 1
|
||||
#define VEML7700_POWERSAVE_MODE2 0x01 ///< Power saving mode 2
|
||||
#define VEML7700_POWERSAVE_MODE3 0x02 ///< Power saving mode 3
|
||||
#define VEML7700_POWERSAVE_MODE4 0x03 ///< Power saving mode 4
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Class that stores state and functions for interacting with
|
||||
* VEML7700 Temp Sensor
|
||||
*/
|
||||
class Adafruit_VEML7700 {
|
||||
public:
|
||||
Adafruit_VEML7700();
|
||||
boolean begin(TwoWire *theWire = &Wire);
|
||||
|
||||
void enable(bool enable);
|
||||
bool enabled(void);
|
||||
|
||||
void interruptEnable(bool enable);
|
||||
bool interruptEnabled(void);
|
||||
void setPersistence(uint8_t pers);
|
||||
uint8_t getPersistence(void);
|
||||
void setIntegrationTime(uint8_t it);
|
||||
uint8_t getIntegrationTime(void);
|
||||
void setGain(uint8_t gain);
|
||||
uint8_t getGain(void);
|
||||
void powerSaveEnable(bool enable);
|
||||
bool powerSaveEnabled(void);
|
||||
void setPowerSaveMode(uint8_t mode);
|
||||
uint8_t getPowerSaveMode(void);
|
||||
|
||||
void setLowThreshold(uint16_t value);
|
||||
uint16_t getLowThreshold(void);
|
||||
void setHighThreshold(uint16_t value);
|
||||
uint16_t getHighThreshold(void);
|
||||
uint16_t interruptStatus(void);
|
||||
|
||||
|
||||
float readLux();
|
||||
float readLuxNormalized();
|
||||
|
||||
uint16_t readALS();
|
||||
float readWhite();
|
||||
float readWhiteNormalized();
|
||||
|
||||
private:
|
||||
Adafruit_I2CRegister *ALS_Config, *ALS_Data, *White_Data,
|
||||
*ALS_HighThreshold, *ALS_LowThreshold, *Power_Saving, *Interrupt_Status;
|
||||
Adafruit_I2CRegisterBits *ALS_Shutdown, *ALS_Interrupt_Enable,
|
||||
*ALS_Persistence, *ALS_Integration_Time, *ALS_Gain,
|
||||
*PowerSave_Enable, *PowerSave_Mode;
|
||||
|
||||
float normalize_resolution(float value);
|
||||
|
||||
Adafruit_I2CDevice *i2c_dev;
|
||||
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
Adafruit_VEML7700 [](https://travis-ci.com/adafruit/Adafruit_VEML7700)
|
||||
================
|
||||
|
||||
This is the Adafruit VEML7700 Lux sensor library
|
||||
|
||||
Tested and works great with the [Adafruit VEML7700 Breakout Board](http://www.adafruit.com/)
|
||||
|
||||
This chip uses I2C to communicate, 2 pins are required to interface
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Kevin Townsend/Limor Fried for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above must be included in any redistribution
|
||||
|
|
@ -0,0 +1,58 @@
|
|||
#include "Adafruit_VEML7700.h"
|
||||
|
||||
Adafruit_VEML7700 veml = Adafruit_VEML7700();
|
||||
|
||||
void setup() {
|
||||
while (!Serial) { delay(10); }
|
||||
Serial.begin(115200);
|
||||
Serial.println("Adafruit VEML7700 Test");
|
||||
|
||||
if (!veml.begin()) {
|
||||
Serial.println("Sensor not found");
|
||||
while (1);
|
||||
}
|
||||
Serial.println("Sensor found");
|
||||
|
||||
veml.setGain(VEML7700_GAIN_1);
|
||||
veml.setIntegrationTime(VEML7700_IT_800MS);
|
||||
|
||||
Serial.print(F("Gain: "));
|
||||
switch (veml.getGain()) {
|
||||
case VEML7700_GAIN_1: Serial.println("1"); break;
|
||||
case VEML7700_GAIN_2: Serial.println("2"); break;
|
||||
case VEML7700_GAIN_1_4: Serial.println("1/4"); break;
|
||||
case VEML7700_GAIN_1_8: Serial.println("1/8"); break;
|
||||
}
|
||||
|
||||
Serial.print(F("Integration Time (ms): "));
|
||||
switch (veml.getIntegrationTime()) {
|
||||
case VEML7700_IT_25MS: Serial.println("25"); break;
|
||||
case VEML7700_IT_50MS: Serial.println("50"); break;
|
||||
case VEML7700_IT_100MS: Serial.println("100"); break;
|
||||
case VEML7700_IT_200MS: Serial.println("200"); break;
|
||||
case VEML7700_IT_400MS: Serial.println("400"); break;
|
||||
case VEML7700_IT_800MS: Serial.println("800"); break;
|
||||
}
|
||||
|
||||
//veml.powerSaveEnable(true);
|
||||
//veml.setPowerSaveMode(VEML7700_POWERSAVE_MODE4);
|
||||
|
||||
veml.setLowThreshold(10000);
|
||||
veml.setHighThreshold(20000);
|
||||
veml.interruptEnable(true);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
Serial.print("Lux: "); Serial.println(veml.readLux());
|
||||
Serial.print("White: "); Serial.println(veml.readWhite());
|
||||
Serial.print("Raw ALS: "); Serial.println(veml.readALS());
|
||||
|
||||
uint16_t irq = veml.interruptStatus();
|
||||
if (irq & VEML7700_INTERRUPT_LOW) {
|
||||
Serial.println("** Low threshold");
|
||||
}
|
||||
if (irq & VEML7700_INTERRUPT_HIGH) {
|
||||
Serial.println("** High threshold");
|
||||
}
|
||||
delay(500);
|
||||
}
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
name=Adafruit VEML7700 Library
|
||||
version=1.0.0
|
||||
author=Adafruit
|
||||
maintainer=Adafruit <info@adafruit.com>
|
||||
sentence=Arduino library for the VEML7700 sensors in the Adafruit shop
|
||||
paragraph=Arduino library for the VEML7700 sensors in the Adafruit shop
|
||||
category=Sensors
|
||||
url=https://github.com/adafruit/Adafruit_VEML7700
|
||||
architectures=*
|
||||
|
|
@ -0,0 +1,26 @@
|
|||
Software License Agreement (BSD License)
|
||||
|
||||
Copyright (c) 2012, Adafruit Industries
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
1. Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
2. Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
3. Neither the name of the copyright holders nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
|
||||
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
|
@ -1,103 +0,0 @@
|
|||
// Copyright 2018 David Conran
|
||||
|
||||
// Supports:
|
||||
// Brand: Carrier/Surrey, Model: 42QG5A55970 remote
|
||||
// Brand: Carrier/Surrey, Model: 619EGX0090E0 A/C
|
||||
// Brand: Carrier/Surrey, Model: 619EGX0120E0 A/C
|
||||
// Brand: Carrier/Surrey, Model: 619EGX0180E0 A/C
|
||||
// Brand: Carrier/Surrey, Model: 619EGX0220E0 A/C
|
||||
// Brand: Carrier/Surrey, Model: 53NGK009/012 Inverter
|
||||
|
||||
#include "IRrecv.h"
|
||||
#include "IRsend.h"
|
||||
#include "IRutils.h"
|
||||
|
||||
// Constants
|
||||
// Ref:
|
||||
// https://github.com/crankyoldgit/IRremoteESP8266/issues/385
|
||||
const uint16_t kCarrierAcHdrMark = 8532;
|
||||
const uint16_t kCarrierAcHdrSpace = 4228;
|
||||
const uint16_t kCarrierAcBitMark = 628;
|
||||
const uint16_t kCarrierAcOneSpace = 1320;
|
||||
const uint16_t kCarrierAcZeroSpace = 532;
|
||||
const uint16_t kCarrierAcGap = 20000;
|
||||
|
||||
#if SEND_CARRIER_AC
|
||||
// Send a Carrier HVAC formatted message.
|
||||
//
|
||||
// Args:
|
||||
// data: The message to be sent.
|
||||
// nbits: The bit size of the message being sent. typically kCarrierAcBits.
|
||||
// repeat: The number of times the message is to be repeated.
|
||||
//
|
||||
// Status: STABLE / Work on real devices.
|
||||
//
|
||||
void IRsend::sendCarrierAC(uint64_t data, uint16_t nbits, uint16_t repeat) {
|
||||
for (uint16_t r = 0; r <= repeat; r++) {
|
||||
uint64_t temp_data = data;
|
||||
// Carrier sends the data block three times. normal + inverted + normal.
|
||||
for (uint16_t i = 0; i < 3; i++) {
|
||||
sendGeneric(kCarrierAcHdrMark, kCarrierAcHdrSpace, kCarrierAcBitMark,
|
||||
kCarrierAcOneSpace, kCarrierAcBitMark, kCarrierAcZeroSpace,
|
||||
kCarrierAcBitMark, kCarrierAcGap, temp_data, nbits, 38, true,
|
||||
0, kDutyDefault);
|
||||
temp_data = invertBits(temp_data, nbits);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#if DECODE_CARRIER_AC
|
||||
// Decode the supplied Carrier HVAC message.
|
||||
// Carrier HVAC messages contain only 32 bits, but it is sent three(3) times.
|
||||
// i.e. normal + inverted + normal
|
||||
// Args:
|
||||
// results: Ptr to the data to decode and where to store the decode result.
|
||||
// offset: The starting index to use when attempting to decode the raw data.
|
||||
// Typically/Defaults to kStartOffset.
|
||||
// nbits: Nr. of bits to expect in the data portion.
|
||||
// Typically kCarrierAcBits.
|
||||
// strict: Flag to indicate if we strictly adhere to the specification.
|
||||
// Returns:
|
||||
// boolean: True if it can decode it, false if it can't.
|
||||
//
|
||||
// Status: BETA / Probably works.
|
||||
//
|
||||
bool IRrecv::decodeCarrierAC(decode_results *results, uint16_t offset,
|
||||
const uint16_t nbits, const bool strict) {
|
||||
if (results->rawlen < ((2 * nbits + kHeader + kFooter) * 3) - 1 + offset)
|
||||
return false; // Can't possibly be a valid Carrier message.
|
||||
if (strict && nbits != kCarrierAcBits)
|
||||
return false; // We expect Carrier to be 32 bits of message.
|
||||
|
||||
uint64_t data = 0;
|
||||
uint64_t prev_data = 0;
|
||||
|
||||
for (uint8_t i = 0; i < 3; i++) {
|
||||
prev_data = data;
|
||||
// Match Header + Data + Footer
|
||||
uint16_t used;
|
||||
used = matchGeneric(results->rawbuf + offset, &data,
|
||||
results->rawlen - offset, nbits,
|
||||
kCarrierAcHdrMark, kCarrierAcHdrSpace,
|
||||
kCarrierAcBitMark, kCarrierAcOneSpace,
|
||||
kCarrierAcBitMark, kCarrierAcZeroSpace,
|
||||
kCarrierAcBitMark, kCarrierAcGap, true);
|
||||
if (!used) return false;
|
||||
offset += used;
|
||||
// Compliance.
|
||||
if (strict) {
|
||||
// Check if the data is an inverted copy of the previous data.
|
||||
if (i > 0 && prev_data != invertBits(data, nbits)) return false;
|
||||
}
|
||||
}
|
||||
|
||||
// Success
|
||||
results->bits = nbits;
|
||||
results->value = data;
|
||||
results->decode_type = CARRIER_AC;
|
||||
results->address = data >> 16;
|
||||
results->command = data & 0xFFFF;
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1,107 +0,0 @@
|
|||
// Copyright 2019 crankyoldgit
|
||||
|
||||
// Supports:
|
||||
// Brand: Sharp, Model: LC-52D62U TV
|
||||
// Brand: Sharp, Model: AY-ZP40KR A/C
|
||||
// Brand: Sharp, Model: AH-AxSAY A/C
|
||||
|
||||
#ifndef IR_SHARP_H_
|
||||
#define IR_SHARP_H_
|
||||
|
||||
#ifndef UNIT_TEST
|
||||
#include <Arduino.h>
|
||||
#endif
|
||||
#include "IRrecv.h"
|
||||
#include "IRremoteESP8266.h"
|
||||
#include "IRsend.h"
|
||||
#ifdef UNIT_TEST
|
||||
#include "IRsend_test.h"
|
||||
#endif
|
||||
|
||||
// Constants
|
||||
const uint16_t kSharpAcHdrMark = 3800;
|
||||
const uint16_t kSharpAcHdrSpace = 1900;
|
||||
const uint16_t kSharpAcBitMark = 470;
|
||||
const uint16_t kSharpAcZeroSpace = 500;
|
||||
const uint16_t kSharpAcOneSpace = 1400;
|
||||
const uint32_t kSharpAcGap = kDefaultMessageGap;
|
||||
|
||||
const uint8_t kSharpAcAuto = 0b000;
|
||||
const uint8_t kSharpAcDry = 0b011;
|
||||
const uint8_t kSharpAcCool = 0b010;
|
||||
const uint8_t kSharpAcHeat = 0b001;
|
||||
const uint8_t kSharpAcMinTemp = 15; // Celsius
|
||||
const uint8_t kSharpAcMaxTemp = 30; // Celsius
|
||||
const uint8_t kSharpAcFanAuto = 0b010; // 2
|
||||
const uint8_t kSharpAcFanMin = 0b100; // 4 (FAN1)
|
||||
const uint8_t kSharpAcFanMed = 0b011; // 3 (FAN2)
|
||||
const uint8_t kSharpAcFanHigh = 0b101; // 5 (FAN3)
|
||||
const uint8_t kSharpAcFanMax = 0b111; // 7 (FAN4)
|
||||
const uint8_t kSharpAcByteTemp = 4;
|
||||
const uint8_t kSharpAcBytePower = 5;
|
||||
const uint8_t kSharpAcBitPowerOffset = 4; // 0b000x0000
|
||||
const uint8_t kSharpAcBitPreviousPowerOffset = 5; // 0b00x00000
|
||||
const uint8_t kSharpAcByteMode = 6;
|
||||
const uint8_t kSharpAcModeSize = 2; // Mask 0b00000011;
|
||||
const uint8_t kSharpAcByteFan = kSharpAcByteMode;
|
||||
const uint8_t kSharpAcFanOffset = 4; // Mask 0b01110000
|
||||
const uint8_t kSharpAcFanSize = 3; // Nr. of Bits
|
||||
const uint8_t kSharpAcByteButton = 10;
|
||||
const uint8_t kSharpAcButtonOffset = 0;
|
||||
const uint8_t kSharpAcButtonSize = 3; // Mask 0b00000xxx
|
||||
const uint8_t kSharpAcButtonPowerMode = 0b000; // 0
|
||||
const uint8_t kSharpAcButtonTemp = 0b100; // 4
|
||||
const uint8_t kSharpAcButtonFan = 0b101; // 5
|
||||
|
||||
class IRSharpAc {
|
||||
public:
|
||||
explicit IRSharpAc(const uint16_t pin, const bool inverted = false,
|
||||
const bool use_modulation = true);
|
||||
|
||||
#if SEND_SHARP_AC
|
||||
void send(const uint16_t repeat = kSharpAcDefaultRepeat);
|
||||
uint8_t calibrate(void) { return _irsend.calibrate(); }
|
||||
#endif // SEND_SHARP_AC
|
||||
void begin(void);
|
||||
void on(void);
|
||||
void off(void);
|
||||
void setPower(const bool on);
|
||||
void setPower(const bool on, const bool prev);
|
||||
bool getPower(void);
|
||||
void setPreviousPower(const bool on);
|
||||
bool getPreviousPower(void);
|
||||
void setTemp(const uint8_t temp);
|
||||
uint8_t getTemp(void);
|
||||
void setFan(const uint8_t fan);
|
||||
uint8_t getFan(void);
|
||||
void setMode(const uint8_t mode);
|
||||
uint8_t getMode(void);
|
||||
void setButton(const uint8_t button);
|
||||
uint8_t getButton(void);
|
||||
uint8_t* getRaw(void);
|
||||
void setRaw(const uint8_t new_code[],
|
||||
const uint16_t length = kSharpAcStateLength);
|
||||
static bool validChecksum(uint8_t state[],
|
||||
const uint16_t length = kSharpAcStateLength);
|
||||
static uint8_t convertMode(const stdAc::opmode_t mode);
|
||||
static uint8_t convertFan(const stdAc::fanspeed_t speed);
|
||||
static stdAc::opmode_t toCommonMode(const uint8_t mode);
|
||||
static stdAc::fanspeed_t toCommonFanSpeed(const uint8_t speed);
|
||||
stdAc::state_t toCommon(void);
|
||||
String toString(void);
|
||||
#ifndef UNIT_TEST
|
||||
|
||||
private:
|
||||
IRsend _irsend;
|
||||
#else
|
||||
IRsendTest _irsend;
|
||||
#endif
|
||||
// # of bytes per command
|
||||
uint8_t remote[kSharpAcStateLength];
|
||||
void stateReset(void);
|
||||
void checksum(void);
|
||||
static uint8_t calcChecksum(uint8_t state[],
|
||||
const uint16_t length = kSharpAcStateLength);
|
||||
};
|
||||
|
||||
#endif // IR_SHARP_H_
|
||||
|
|
@ -1,653 +0,0 @@
|
|||
# SYNOPSIS:
|
||||
#
|
||||
# make [all] - makes everything.
|
||||
# make TARGET - makes the given target.
|
||||
# make run - makes everything and runs all the tests.
|
||||
# make clean - removes all files generated by make.
|
||||
# make install-googletest - install the googletest code suite
|
||||
|
||||
# Please tweak the following variable definitions as needed by your
|
||||
# project, except GTEST_HEADERS, which you can use in your own targets
|
||||
# but shouldn't modify.
|
||||
|
||||
# Points to the root of Google Test, relative to where this file is.
|
||||
# Remember to tweak this if you move this file.
|
||||
GTEST_DIR = ../lib/googletest/googletest
|
||||
|
||||
# Where to find user code.
|
||||
USER_DIR = ../src
|
||||
INCLUDES = -I$(USER_DIR) -I.
|
||||
|
||||
# Flags passed to the preprocessor.
|
||||
# Set Google Test's header directory as a system directory, such that
|
||||
# the compiler doesn't generate warnings in Google Test headers.
|
||||
CPPFLAGS += -isystem $(GTEST_DIR)/include -DUNIT_TEST -D_IR_LOCALE_=en-AU
|
||||
|
||||
# Flags passed to the C++ compiler.
|
||||
CXXFLAGS += -g -Wall -Wextra -pthread -std=gnu++11
|
||||
|
||||
# All tests produced by this Makefile. Remember to add new tests you
|
||||
# created to the list.
|
||||
TESTS = IRutils_test IRsend_test ir_NEC_test ir_GlobalCache_test \
|
||||
ir_Sherwood_test ir_Sony_test ir_Samsung_test ir_Kelvinator_test \
|
||||
ir_JVC_test ir_RCMM_test ir_LG_test ir_Mitsubishi_test ir_Sharp_test \
|
||||
ir_RC5_RC6_test ir_Panasonic_test ir_Dish_test ir_Whynter_test \
|
||||
ir_Aiwa_test ir_Denon_test ir_Sanyo_test ir_Daikin_test ir_Coolix_test \
|
||||
ir_Gree_test IRrecv_test ir_Pronto_test ir_Fujitsu_test ir_Nikai_test \
|
||||
ir_Toshiba_test ir_Midea_test ir_Magiquest_test ir_Lasertag_test \
|
||||
ir_Carrier_test ir_Haier_test ir_Hitachi_test ir_GICable_test \
|
||||
ir_Whirlpool_test ir_Lutron_test ir_Electra_test ir_Pioneer_test \
|
||||
ir_MWM_test ir_Vestel_test ir_Teco_test ir_Tcl_test ir_Lego_test IRac_test \
|
||||
ir_MitsubishiHeavy_test ir_Trotec_test ir_Argo_test ir_Goodweather_test \
|
||||
ir_Inax_test ir_Neoclima_test ir_Amcor_test ir_Epson_test ir_Symphony_test \
|
||||
ir_Airwell_test
|
||||
|
||||
# All Google Test headers. Usually you shouldn't change this
|
||||
# definition.
|
||||
GTEST_HEADERS = $(GTEST_DIR)/include/gtest/*.h \
|
||||
$(GTEST_DIR)/include/gtest/internal/*.h
|
||||
|
||||
# House-keeping build targets.
|
||||
|
||||
all : $(TESTS)
|
||||
|
||||
clean :
|
||||
rm -f $(TESTS) gtest.a gtest_main.a *.o
|
||||
|
||||
# Build and run all the tests.
|
||||
run : all
|
||||
failed=""; \
|
||||
for unittest in $(TESTS); do \
|
||||
./$${unittest} || failed="$${failed} $${unittest}"; \
|
||||
done; \
|
||||
if [ -n "$${failed}" ]; then \
|
||||
echo "FAIL: :-( :-( Unit test(s)$${failed} failed! :-( :-("; exit 1; \
|
||||
else \
|
||||
echo "PASS: \o/ \o/ All unit tests passed. \o/ \o/"; \
|
||||
fi
|
||||
|
||||
run_tests : run
|
||||
|
||||
install-googletest :
|
||||
git clone -b v1.8.x https://github.com/google/googletest.git ../lib/googletest
|
||||
|
||||
# Builds gtest.a and gtest_main.a.
|
||||
|
||||
# Usually you shouldn't tweak such internal variables, indicated by a
|
||||
# trailing _.
|
||||
GTEST_SRCS_ = $(GTEST_DIR)/src/*.cc $(GTEST_DIR)/src/*.h $(GTEST_HEADERS)
|
||||
|
||||
# All the IR protocol object files.
|
||||
PROTOCOLS = ir_NEC.o ir_Sony.o ir_Samsung.o ir_JVC.o ir_RCMM.o ir_RC5_RC6.o \
|
||||
ir_LG.o ir_Mitsubishi.o ir_Fujitsu.o ir_Sharp.o ir_Sanyo.o ir_Denon.o ir_Dish.o \
|
||||
ir_Panasonic.o ir_Whynter.o ir_Coolix.o ir_Aiwa.o ir_Sherwood.o \
|
||||
ir_Kelvinator.o ir_Daikin.o ir_Gree.o ir_Pronto.o ir_Nikai.o ir_Toshiba.o \
|
||||
ir_Midea.o ir_Magiquest.o ir_Lasertag.o ir_Carrier.o ir_Haier.o \
|
||||
ir_Hitachi.o ir_GICable.o ir_Whirlpool.o ir_Lutron.o ir_Electra.o \
|
||||
ir_Pioneer.o ir_MWM.o ir_Vestel.o ir_Teco.o ir_Tcl.o ir_Lego.o ir_Argo.o \
|
||||
ir_Trotec.o ir_MitsubishiHeavy.o ir_Goodweather.o ir_Inax.o ir_Neoclima.o \
|
||||
ir_Amcor.o ir_Epson.o ir_Symphony.o ir_Airwell.o
|
||||
|
||||
# All the IR Protocol header files.
|
||||
PROTOCOLS_H = $(USER_DIR)/ir_Amcor.h \
|
||||
$(USER_DIR)/ir_Argo.h \
|
||||
$(USER_DIR)/ir_Gree.h \
|
||||
$(USER_DIR)/ir_Magiquest.h \
|
||||
$(USER_DIR)/ir_Coolix.h \
|
||||
$(USER_DIR)/ir_Electra.h \
|
||||
$(USER_DIR)/ir_Haier.h \
|
||||
$(USER_DIR)/ir_Hitachi.h \
|
||||
$(USER_DIR)/ir_Midea.h \
|
||||
$(USER_DIR)/ir_Toshiba.h \
|
||||
$(USER_DIR)/ir_Daikin.h \
|
||||
$(USER_DIR)/ir_Goodweather.h \
|
||||
$(USER_DIR)/ir_Kelvinator.h \
|
||||
$(USER_DIR)/ir_Mitsubishi.h \
|
||||
$(USER_DIR)/ir_MitsubishiHeavy.h \
|
||||
$(USER_DIR)/ir_NEC.h \
|
||||
$(USER_DIR)/ir_Neoclima.h \
|
||||
$(USER_DIR)/ir_Sharp.h \
|
||||
$(USER_DIR)/ir_Samsung.h \
|
||||
$(USER_DIR)/ir_Trotec.h \
|
||||
$(USER_DIR)/ir_Fujitsu.h \
|
||||
$(USER_DIR)/ir_LG.h \
|
||||
$(USER_DIR)/ir_Panasonic.h \
|
||||
$(USER_DIR)/ir_Whirlpool.h \
|
||||
$(USER_DIR)/ir_Vestel.h \
|
||||
$(USER_DIR)/ir_Tcl.h \
|
||||
$(USER_DIR)/ir_Teco.h \
|
||||
$(USER_DIR)/ir_Trotec.h
|
||||
# Common object files
|
||||
COMMON_OBJ = IRutils.o IRtimer.o IRsend.o IRrecv.o IRac.o ir_GlobalCache.o \
|
||||
IRtext.o $(PROTOCOLS) gtest_main.a
|
||||
# Common dependencies
|
||||
COMMON_DEPS = $(USER_DIR)/IRrecv.h $(USER_DIR)/IRsend.h $(USER_DIR)/IRtimer.h \
|
||||
$(USER_DIR)/IRutils.h $(USER_DIR)/IRremoteESP8266.h \
|
||||
$(USER_DIR)/IRac.h $(USER_DIR)/i18n.h $(USER_DIR)/IRtext.h \
|
||||
$(PROTOCOLS_H)
|
||||
|
||||
# Common test dependencies
|
||||
COMMON_TEST_DEPS = $(COMMON_DEPS) IRrecv_test.h IRsend_test.h
|
||||
|
||||
# For simplicity and to avoid depending on Google Test's
|
||||
# implementation details, the dependencies specified below are
|
||||
# conservative and not optimized. This is fine as Google Test
|
||||
# compiles fast and for ordinary users its source rarely changes.
|
||||
gtest-all.o : $(GTEST_SRCS_)
|
||||
$(CXX) $(CPPFLAGS) -I$(GTEST_DIR) $(CXXFLAGS) -c \
|
||||
$(GTEST_DIR)/src/gtest-all.cc
|
||||
|
||||
gtest_main.o : $(GTEST_SRCS_)
|
||||
$(CXX) $(CPPFLAGS) -I$(GTEST_DIR) $(CXXFLAGS) -c \
|
||||
$(GTEST_DIR)/src/gtest_main.cc
|
||||
|
||||
gtest.a : gtest-all.o
|
||||
$(AR) $(ARFLAGS) $@ $^
|
||||
|
||||
gtest_main.a : gtest-all.o gtest_main.o
|
||||
$(AR) $(ARFLAGS) $@ $^
|
||||
|
||||
# Builds our test. A test should link with either gtest.a or
|
||||
# gtest_main.a, depending on whether it defines its own main()
|
||||
# function.
|
||||
|
||||
IRtext.o : $(USER_DIR)/IRtext.cpp $(USER_DIR)/IRtext.h $(USER_DIR)/IRremoteESP8266.h $(USER_DIR)/i18n.h $(USER_DIR)/locale/*.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/IRtext.cpp
|
||||
|
||||
IRutils.o : $(USER_DIR)/IRutils.cpp $(USER_DIR)/IRutils.h $(USER_DIR)/IRremoteESP8266.h $(USER_DIR)/i18n.h $(USER_DIR)/IRtext.cpp $(USER_DIR)/IRtext.h $(USER_DIR)/locale/*.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/IRutils.cpp
|
||||
|
||||
IRutils_test.o : IRutils_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c IRutils_test.cpp
|
||||
|
||||
IRutils_test : IRutils_test.o ir_NEC.o ir_Nikai.o ir_Toshiba.o IRtext.o $(COMMON_OBJ) gtest_main.a
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
IRtimer.o : $(USER_DIR)/IRtimer.cpp $(USER_DIR)/IRtimer.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/IRtimer.cpp
|
||||
|
||||
IRsend.o : $(USER_DIR)/IRsend.cpp $(USER_DIR)/IRsend.h $(USER_DIR)/IRremoteESP8266.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/IRsend.cpp
|
||||
|
||||
IRsend_test.o : IRsend_test.cpp $(USER_DIR)/IRsend.h $(USER_DIR)/IRrecv.h IRsend_test.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c IRsend_test.cpp
|
||||
|
||||
IRsend_test : IRsend_test.o $(COMMON_OBJ)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
IRrecv.o : $(USER_DIR)/IRrecv.cpp $(USER_DIR)/IRrecv.h $(USER_DIR)/IRremoteESP8266.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/IRrecv.cpp
|
||||
|
||||
IRrecv_test.o : IRrecv_test.cpp $(USER_DIR)/IRsend.h $(USER_DIR)/IRrecv.h IRsend_test.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c IRrecv_test.cpp
|
||||
|
||||
IRrecv_test : IRrecv_test.o $(COMMON_OBJ)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
IRac.o : $(USER_DIR)/IRac.cpp $(USER_DIR)/IRac.h $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/IRac.cpp
|
||||
|
||||
IRac_test.o : IRac_test.cpp $(USER_DIR)/IRac.h $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c IRac_test.cpp
|
||||
|
||||
IRac_test : IRac_test.o $(COMMON_OBJ)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_NEC.o : $(USER_DIR)/ir_NEC.cpp $(USER_DIR)/ir_NEC.h $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_NEC.cpp
|
||||
|
||||
ir_NEC_test.o : ir_NEC_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_NEC_test.cpp
|
||||
|
||||
ir_NEC_test : $(COMMON_OBJ) ir_NEC_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_GlobalCache.o : $(USER_DIR)/ir_GlobalCache.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_GlobalCache.cpp
|
||||
|
||||
ir_GlobalCache_test.o : ir_GlobalCache_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_GlobalCache_test.cpp
|
||||
|
||||
ir_GlobalCache_test : $(COMMON_OBJ) ir_GlobalCache_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Sherwood.o : $(USER_DIR)/ir_Sherwood.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Sherwood.cpp
|
||||
|
||||
ir_Sherwood_test.o : ir_Sherwood_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Sherwood_test.cpp
|
||||
|
||||
ir_Sherwood_test : $(COMMON_OBJ) ir_Sherwood_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Sony.o : $(USER_DIR)/ir_Sony.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Sony.cpp
|
||||
|
||||
ir_Sony_test.o : ir_Sony_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Sony_test.cpp
|
||||
|
||||
ir_Sony_test : $(COMMON_OBJ) ir_Sony_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Samsung.o : $(USER_DIR)/ir_Samsung.cpp $(USER_DIR)/ir_Samsung.h $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Samsung.cpp
|
||||
|
||||
ir_Samsung_test.o : ir_Samsung_test.cpp $(USER_DIR)/ir_Samsung.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Samsung_test.cpp
|
||||
|
||||
ir_Samsung_test : $(COMMON_OBJ) ir_Samsung_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Kelvinator.o : $(USER_DIR)/ir_Kelvinator.cpp $(USER_DIR)/ir_Kelvinator.h $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Kelvinator.cpp
|
||||
|
||||
ir_Kelvinator_test.o : ir_Kelvinator_test.cpp $(USER_DIR)/ir_Kelvinator.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Kelvinator_test.cpp
|
||||
|
||||
ir_Kelvinator_test : $(COMMON_OBJ) ir_Kelvinator_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_JVC.o : $(USER_DIR)/ir_JVC.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_JVC.cpp
|
||||
|
||||
ir_JVC_test.o : ir_JVC_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_JVC_test.cpp
|
||||
|
||||
ir_JVC_test : $(COMMON_OBJ) ir_JVC_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_RCMM.o : $(USER_DIR)/ir_RCMM.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_RCMM.cpp
|
||||
|
||||
ir_RCMM_test.o : ir_RCMM_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_RCMM_test.cpp
|
||||
|
||||
ir_RCMM_test : $(COMMON_OBJ) ir_RCMM_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_LG.o : $(USER_DIR)/ir_LG.h $(USER_DIR)/ir_LG.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_LG.cpp
|
||||
|
||||
ir_LG_test.o : ir_LG_test.cpp $(USER_DIR)/ir_LG.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_LG_test.cpp
|
||||
|
||||
ir_LG_test : $(COMMON_OBJ) ir_LG_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Mitsubishi.o : $(USER_DIR)/ir_Mitsubishi.h $(USER_DIR)/ir_Mitsubishi.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Mitsubishi.cpp
|
||||
|
||||
ir_Mitsubishi_test.o : ir_Mitsubishi_test.cpp $(USER_DIR)/ir_Mitsubishi.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Mitsubishi_test.cpp
|
||||
|
||||
ir_Mitsubishi_test : $(COMMON_OBJ) ir_Mitsubishi_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_MitsubishiHeavy.o : $(USER_DIR)/ir_MitsubishiHeavy.h $(USER_DIR)/ir_MitsubishiHeavy.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_MitsubishiHeavy.cpp
|
||||
|
||||
ir_MitsubishiHeavy_test.o : ir_MitsubishiHeavy_test.cpp $(USER_DIR)/ir_MitsubishiHeavy.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_MitsubishiHeavy_test.cpp
|
||||
|
||||
ir_MitsubishiHeavy_test : $(COMMON_OBJ) ir_MitsubishiHeavy_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Fujitsu.o : $(USER_DIR)/ir_Fujitsu.h $(USER_DIR)/ir_Fujitsu.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Fujitsu.cpp
|
||||
|
||||
ir_Fujitsu_test.o : ir_Fujitsu_test.cpp $(USER_DIR)/ir_Fujitsu.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Fujitsu_test.cpp
|
||||
|
||||
ir_Fujitsu_test : $(COMMON_OBJ) ir_Fujitsu_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Sharp.o : $(USER_DIR)/ir_Sharp.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Sharp.cpp
|
||||
|
||||
ir_Sharp_test.o : ir_Sharp_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Sharp_test.cpp
|
||||
|
||||
ir_Sharp_test : $(COMMON_OBJ) ir_Sharp_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_RC5_RC6.o : $(USER_DIR)/ir_RC5_RC6.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_RC5_RC6.cpp
|
||||
|
||||
ir_RC5_RC6_test.o : ir_RC5_RC6_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_RC5_RC6_test.cpp
|
||||
|
||||
ir_RC5_RC6_test : $(COMMON_OBJ) ir_RC5_RC6_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Panasonic.o : $(USER_DIR)/ir_Panasonic.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Panasonic.cpp
|
||||
|
||||
ir_Panasonic_test.o : ir_Panasonic_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Panasonic_test.cpp
|
||||
|
||||
ir_Panasonic_test : $(COMMON_OBJ) ir_Panasonic_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Dish.o : $(USER_DIR)/ir_Dish.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Dish.cpp
|
||||
|
||||
ir_Dish_test.o : ir_Dish_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Dish_test.cpp
|
||||
|
||||
ir_Dish_test : $(COMMON_OBJ) ir_Dish_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Whynter.o : $(USER_DIR)/ir_Whynter.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Whynter.cpp
|
||||
|
||||
ir_Whynter_test.o : ir_Whynter_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Whynter_test.cpp
|
||||
|
||||
ir_Whynter_test : $(COMMON_OBJ) ir_Whynter_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Coolix.o : $(USER_DIR)/ir_Coolix.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Coolix.cpp
|
||||
|
||||
ir_Coolix_test.o : ir_Coolix_test.cpp $(USER_DIR)/ir_Coolix.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Coolix_test.cpp
|
||||
|
||||
ir_Coolix_test : $(COMMON_OBJ) ir_Coolix_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Aiwa.o : $(USER_DIR)/ir_Aiwa.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Aiwa.cpp
|
||||
|
||||
ir_Aiwa_test.o : ir_Aiwa_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Aiwa_test.cpp
|
||||
|
||||
ir_Aiwa_test : $(COMMON_OBJ) ir_Aiwa_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Denon.o : $(USER_DIR)/ir_Denon.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Denon.cpp
|
||||
|
||||
ir_Denon_test.o : ir_Denon_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Denon_test.cpp
|
||||
|
||||
ir_Denon_test : $(COMMON_OBJ) ir_Denon_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Sanyo.o : $(USER_DIR)/ir_Sanyo.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Sanyo.cpp
|
||||
|
||||
ir_Sanyo_test.o : ir_Sanyo_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Sanyo_test.cpp
|
||||
|
||||
ir_Sanyo_test : $(COMMON_OBJ) ir_Sanyo_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Daikin.o : $(USER_DIR)/ir_Daikin.cpp $(USER_DIR)/ir_Daikin.h $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Daikin.cpp
|
||||
|
||||
ir_Daikin_test.o : ir_Daikin_test.cpp $(USER_DIR)/ir_Daikin.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Daikin_test.cpp
|
||||
|
||||
ir_Daikin_test : $(COMMON_OBJ) ir_Daikin_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Gree.o : $(USER_DIR)/ir_Gree.cpp $(GTEST_HEADERS) $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Gree.cpp
|
||||
|
||||
ir_Gree_test.o : ir_Gree_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Gree_test.cpp
|
||||
|
||||
ir_Gree_test : $(COMMON_OBJ) ir_Gree_test.o ir_Kelvinator.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Pronto.o : $(USER_DIR)/ir_Pronto.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Pronto.cpp
|
||||
|
||||
ir_Pronto_test.o : ir_Pronto_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Pronto_test.cpp
|
||||
|
||||
ir_Pronto_test : $(COMMON_OBJ) ir_Pronto_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Nikai.o : $(USER_DIR)/ir_Nikai.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Nikai.cpp
|
||||
|
||||
ir_Nikai_test.o : ir_Nikai_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Nikai_test.cpp
|
||||
|
||||
ir_Nikai_test : $(COMMON_OBJ) ir_Nikai_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Toshiba.o : $(USER_DIR)/ir_Toshiba.cpp $(USER_DIR)/ir_Toshiba.h $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Toshiba.cpp
|
||||
|
||||
ir_Toshiba_test.o : ir_Toshiba_test.cpp $(USER_DIR)/ir_Toshiba.h $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Toshiba_test.cpp
|
||||
|
||||
ir_Toshiba_test : $(COMMON_OBJ) ir_Toshiba_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Midea.o : $(USER_DIR)/ir_Midea.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Midea.cpp
|
||||
|
||||
ir_Midea_test.o : ir_Midea_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Midea_test.cpp
|
||||
|
||||
ir_Midea_test : $(COMMON_OBJ) ir_Midea_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Magiquest.o : $(USER_DIR)/ir_Magiquest.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Magiquest.cpp
|
||||
|
||||
ir_Magiquest_test.o : ir_Magiquest_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Magiquest_test.cpp
|
||||
|
||||
ir_Magiquest_test : $(COMMON_OBJ) ir_Magiquest_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Lasertag.o : $(USER_DIR)/ir_Lasertag.cpp $(USER_DIR)/ir_RC5_RC6.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Lasertag.cpp
|
||||
|
||||
ir_Lasertag_test.o : ir_Lasertag_test.cpp $(USER_DIR)/ir_RC5_RC6.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Lasertag_test.cpp
|
||||
|
||||
ir_Lasertag_test : $(COMMON_OBJ) ir_Lasertag_test.o ir_RC5_RC6.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Carrier.o : $(USER_DIR)/ir_Carrier.cpp $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Carrier.cpp
|
||||
|
||||
ir_Carrier_test.o : ir_Carrier_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Carrier_test.cpp
|
||||
|
||||
ir_Carrier_test : $(COMMON_OBJ) ir_Carrier_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Haier.o : $(USER_DIR)/ir_Haier.cpp $(USER_DIR)/ir_Haier.h $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Haier.cpp
|
||||
|
||||
ir_Haier_test.o : ir_Haier_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Haier_test.cpp
|
||||
|
||||
ir_Haier_test : $(COMMON_OBJ) ir_Haier_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Hitachi.o : $(USER_DIR)/ir_Hitachi.cpp $(USER_DIR)/ir_Hitachi.h $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Hitachi.cpp
|
||||
|
||||
ir_Hitachi_test.o : ir_Hitachi_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Hitachi_test.cpp
|
||||
|
||||
ir_Hitachi_test : $(COMMON_OBJ) ir_Hitachi_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_GICable.o : $(USER_DIR)/ir_GICable.cpp $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_GICable.cpp
|
||||
|
||||
ir_GICable_test.o : ir_GICable_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_GICable_test.cpp
|
||||
|
||||
ir_GICable_test : $(COMMON_OBJ) ir_GICable_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Whirlpool.o : $(USER_DIR)/ir_Whirlpool.cpp $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Whirlpool.cpp
|
||||
|
||||
ir_Whirlpool_test.o : ir_Whirlpool_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Whirlpool_test.cpp
|
||||
|
||||
ir_Whirlpool_test : $(COMMON_OBJ) ir_Whirlpool_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Lutron.o : $(USER_DIR)/ir_Lutron.cpp $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Lutron.cpp
|
||||
|
||||
ir_Lutron_test.o : ir_Lutron_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Lutron_test.cpp
|
||||
|
||||
ir_Lutron_test : $(COMMON_OBJ) ir_Lutron_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Electra.o : $(USER_DIR)/ir_Electra.h $(USER_DIR)/ir_Electra.cpp $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Electra.cpp
|
||||
|
||||
ir_Electra_test.o : ir_Electra_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Electra_test.cpp
|
||||
|
||||
ir_Electra_test : $(COMMON_OBJ) ir_Electra_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Pioneer.o : $(USER_DIR)/ir_Pioneer.cpp $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Pioneer.cpp
|
||||
|
||||
ir_Pioneer_test.o : ir_Pioneer_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Pioneer_test.cpp
|
||||
|
||||
ir_Pioneer_test : $(COMMON_OBJ) ir_Pioneer_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_MWM.o : $(USER_DIR)/ir_MWM.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_MWM.cpp
|
||||
|
||||
ir_MWM_test.o : ir_MWM_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_MWM_test.cpp
|
||||
|
||||
ir_MWM_test : $(COMMON_OBJ) ir_MWM_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Vestel.o : $(USER_DIR)/ir_Vestel.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Vestel.cpp
|
||||
|
||||
ir_Vestel_test.o : ir_Vestel_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Vestel_test.cpp
|
||||
|
||||
ir_Vestel_test : $(COMMON_OBJ) ir_Vestel_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Teco.o : $(USER_DIR)/ir_Teco.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Teco.cpp
|
||||
|
||||
ir_Teco_test.o : ir_Teco_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Teco_test.cpp
|
||||
|
||||
ir_Teco_test : $(COMMON_OBJ) ir_Teco_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Tcl.o : $(USER_DIR)/ir_Tcl.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Tcl.cpp
|
||||
|
||||
ir_Tcl_test.o : ir_Tcl_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Tcl_test.cpp
|
||||
|
||||
ir_Tcl_test : $(COMMON_OBJ) ir_Tcl_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Lego.o : $(USER_DIR)/ir_Lego.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Lego.cpp
|
||||
|
||||
ir_Lego_test.o : ir_Lego_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Lego_test.cpp
|
||||
|
||||
ir_Lego_test : $(COMMON_OBJ) ir_Lego_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Argo.o : $(USER_DIR)/ir_Argo.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Argo.cpp
|
||||
|
||||
ir_Argo_test.o : ir_Argo_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Argo_test.cpp
|
||||
|
||||
ir_Argo_test : $(COMMON_OBJ) ir_Argo_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Trotec.o : $(USER_DIR)/ir_Trotec.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Trotec.cpp
|
||||
|
||||
ir_Trotec_test.o : ir_Trotec_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Trotec_test.cpp
|
||||
|
||||
ir_Trotec_test : $(COMMON_OBJ) ir_Trotec_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Goodweather.o : $(USER_DIR)/ir_Goodweather.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Goodweather.cpp
|
||||
|
||||
ir_Goodweather_test.o : ir_Goodweather_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Goodweather_test.cpp
|
||||
|
||||
ir_Goodweather_test : $(COMMON_OBJ) ir_Goodweather_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Inax.o : $(USER_DIR)/ir_Inax.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Inax.cpp
|
||||
|
||||
ir_Inax_test.o : ir_Inax_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Inax_test.cpp
|
||||
|
||||
ir_Inax_test : $(COMMON_OBJ) ir_Inax_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Neoclima.o : $(USER_DIR)/ir_Neoclima.h $(USER_DIR)/ir_Neoclima.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Neoclima.cpp
|
||||
|
||||
ir_Neoclima_test.o : ir_Neoclima_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Neoclima_test.cpp
|
||||
|
||||
ir_Neoclima_test : $(COMMON_OBJ) ir_Neoclima_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Amcor.o : $(USER_DIR)/ir_Amcor.h $(USER_DIR)/ir_Amcor.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Amcor.cpp
|
||||
|
||||
ir_Amcor_test.o : ir_Amcor_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Amcor_test.cpp
|
||||
|
||||
ir_Amcor_test : $(COMMON_OBJ) ir_Amcor_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Epson.o : $(USER_DIR)/ir_Epson.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Epson.cpp
|
||||
|
||||
ir_Epson_test.o : ir_Epson_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Epson_test.cpp
|
||||
|
||||
ir_Epson_test : $(COMMON_OBJ) ir_Epson_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Symphony.o : $(USER_DIR)/ir_Symphony.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Symphony.cpp
|
||||
|
||||
ir_Symphony_test.o : ir_Symphony_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Symphony_test.cpp
|
||||
|
||||
ir_Symphony_test : $(COMMON_OBJ) ir_Symphony_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
ir_Airwell.o : $(USER_DIR)/ir_Airwell.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Airwell.cpp
|
||||
|
||||
ir_Airwell_test.o : ir_Airwell_test.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c ir_Airwell_test.cpp
|
||||
|
||||
ir_Airwell_test : $(COMMON_OBJ) ir_Airwell_test.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
|
@ -1,248 +0,0 @@
|
|||
# SYNOPSIS:
|
||||
#
|
||||
# make [all] - makes everything.
|
||||
# make clean - removes all files generated by make.
|
||||
|
||||
# Please tweak the following variable definitions as needed by your
|
||||
# project, except GTEST_HEADERS, which you can use in your own targets
|
||||
# but shouldn't modify.
|
||||
|
||||
|
||||
# Where to find user code.
|
||||
USER_DIR = ../src
|
||||
|
||||
# Where to find test code.
|
||||
TEST_DIR = ../test
|
||||
|
||||
INCLUDES = -I$(USER_DIR) -I$(TEST_DIR)
|
||||
# Flags passed to the preprocessor.
|
||||
# Set Google Test's header directory as a system directory, such that
|
||||
# the compiler doesn't generate warnings in Google Test headers.
|
||||
CPPFLAGS += -DUNIT_TEST -D_IR_LOCALE_=en-AU
|
||||
|
||||
# Flags passed to the C++ compiler.
|
||||
CXXFLAGS += -g -Wall -Wextra -pthread -std=gnu++11
|
||||
|
||||
all : gc_decode mode2_decode
|
||||
|
||||
run_tests : all
|
||||
failed=""; \
|
||||
for py_unittest in *_test.py; do \
|
||||
echo "RUNNING: $${py_unittest}"; \
|
||||
python3 ./$${py_unittest} || failed="$${failed} $${py_unittest}"; \
|
||||
done; \
|
||||
if [ -n "$${failed}" ]; then \
|
||||
echo "FAIL: :-( :-( Unit test(s)$${failed} failed! :-( :-("; exit 1; \
|
||||
else \
|
||||
echo "PASS: \o/ \o/ All unit tests passed. \o/ \o/"; \
|
||||
fi
|
||||
|
||||
clean :
|
||||
rm -f *.o *.pyc gc_decode mode2_decode
|
||||
|
||||
|
||||
# All the IR protocol object files.
|
||||
PROTOCOLS = ir_NEC.o ir_Sony.o ir_Samsung.o ir_JVC.o ir_RCMM.o ir_RC5_RC6.o \
|
||||
ir_LG.o ir_Mitsubishi.o ir_Fujitsu.o ir_Sharp.o ir_Sanyo.o \
|
||||
ir_Denon.o ir_Dish.o ir_Panasonic.o ir_Whynter.o ir_Coolix.o \
|
||||
ir_Aiwa.o ir_Sherwood.o ir_Kelvinator.o ir_Daikin.o ir_Gree.o \
|
||||
ir_Pronto.o ir_GlobalCache.o ir_Nikai.o ir_Toshiba.o ir_Midea.o \
|
||||
ir_Magiquest.o ir_Lasertag.o ir_Carrier.o ir_Haier.o ir_Hitachi.o \
|
||||
ir_GICable.o ir_Whirlpool.o ir_Lutron.o ir_Electra.o ir_Pioneer.o \
|
||||
ir_MWM.o ir_Vestel.o ir_Teco.o ir_Tcl.o ir_Lego.o \
|
||||
ir_MitsubishiHeavy.o ir_Goodweather.o ir_Inax.o ir_Argo.o \
|
||||
ir_Trotec.o ir_Neoclima.o ir_Amcor.o ir_Epson.o ir_Symphony.o \
|
||||
ir_Airwell.o
|
||||
|
||||
# Common object files
|
||||
COMMON_OBJ = IRutils.o IRtimer.o IRsend.o IRrecv.o IRtext.o IRac.o $(PROTOCOLS)
|
||||
|
||||
# Common dependencies
|
||||
COMMON_DEPS = $(USER_DIR)/IRrecv.h $(USER_DIR)/IRsend.h $(USER_DIR)/IRtimer.h \
|
||||
$(USER_DIR)/IRutils.h $(USER_DIR)/IRremoteESP8266.h \
|
||||
$(TEST_DIR)/IRsend_test.h $(USER_DIR)/IRtext.h $(USER_DIR)/i18n.h
|
||||
# Common test dependencies
|
||||
COMMON_TEST_DEPS = $(COMMON_DEPS) $(TEST_DIR)/IRsend_test.h
|
||||
|
||||
gc_decode.o : gc_decode.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c gc_decode.cpp
|
||||
|
||||
gc_decode : $(COMMON_OBJ) gc_decode.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
mode2_decode.o : mode2_decode.cpp $(COMMON_TEST_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c mode2_decode.cpp
|
||||
|
||||
mode2_decode : $(COMMON_OBJ) mode2_decode.o
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -lpthread $^ -o $@
|
||||
|
||||
IRtext.o : $(USER_DIR)/IRtext.cpp $(USER_DIR)/IRtext.h $(USER_DIR)/IRremoteESP8266.h $(USER_DIR)/i18n.h $(USER_DIR)/locale/*.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/IRtext.cpp
|
||||
|
||||
IRutils.o : $(USER_DIR)/IRutils.cpp $(USER_DIR)/IRutils.h $(USER_DIR)/IRremoteESP8266.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/IRutils.cpp
|
||||
|
||||
IRtimer.o : $(USER_DIR)/IRtimer.cpp $(USER_DIR)/IRtimer.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/IRtimer.cpp
|
||||
|
||||
IRsend.o : $(USER_DIR)/IRsend.cpp $(USER_DIR)/IRsend.h $(USER_DIR)/IRremoteESP8266.h
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/IRsend.cpp
|
||||
|
||||
IRrecv.o : $(USER_DIR)/IRrecv.cpp $(USER_DIR)/IRrecv.h $(USER_DIR)/IRremoteESP8266.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/IRrecv.cpp
|
||||
|
||||
ir_NEC.o : $(USER_DIR)/ir_NEC.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_NEC.cpp
|
||||
|
||||
ir_GlobalCache.o : $(USER_DIR)/ir_GlobalCache.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_GlobalCache.cpp
|
||||
|
||||
ir_Sherwood.o : $(USER_DIR)/ir_Sherwood.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Sherwood.cpp
|
||||
|
||||
ir_Sony.o : $(USER_DIR)/ir_Sony.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Sony.cpp
|
||||
|
||||
ir_Samsung.o : $(USER_DIR)/ir_Samsung.cpp $(USER_DIR)/ir_Samsung.h $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Samsung.cpp
|
||||
|
||||
ir_Kelvinator.o : $(USER_DIR)/ir_Kelvinator.cpp $(USER_DIR)/ir_Kelvinator.h $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Kelvinator.cpp
|
||||
|
||||
ir_Inax.o : $(USER_DIR)/ir_Inax.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Inax.cpp
|
||||
|
||||
ir_JVC.o : $(USER_DIR)/ir_JVC.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_JVC.cpp
|
||||
|
||||
ir_RCMM.o : $(USER_DIR)/ir_RCMM.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_RCMM.cpp
|
||||
|
||||
ir_LG.o : $(USER_DIR)/ir_LG.h $(USER_DIR)/ir_LG.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_LG.cpp
|
||||
|
||||
ir_Mitsubishi.o : $(USER_DIR)/ir_Mitsubishi.h $(USER_DIR)/ir_Mitsubishi.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Mitsubishi.cpp
|
||||
|
||||
ir_MitsubishiHeavy.o : $(USER_DIR)/ir_MitsubishiHeavy.h $(USER_DIR)/ir_MitsubishiHeavy.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_MitsubishiHeavy.cpp
|
||||
|
||||
ir_Fujitsu.o : $(USER_DIR)/ir_Fujitsu.h $(USER_DIR)/ir_Fujitsu.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Fujitsu.cpp
|
||||
|
||||
ir_Sharp.o : $(USER_DIR)/ir_Sharp.h $(USER_DIR)/ir_Sharp.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Sharp.cpp
|
||||
|
||||
ir_RC5_RC6.o : $(USER_DIR)/ir_RC5_RC6.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_RC5_RC6.cpp
|
||||
|
||||
ir_Panasonic.o : $(USER_DIR)/ir_Panasonic.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Panasonic.cpp
|
||||
|
||||
ir_Dish.o : $(USER_DIR)/ir_Dish.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Dish.cpp
|
||||
|
||||
ir_Whynter.o : $(USER_DIR)/ir_Whynter.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Whynter.cpp
|
||||
|
||||
ir_Coolix.o : $(USER_DIR)/ir_Coolix.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Coolix.cpp
|
||||
|
||||
ir_Aiwa.o : $(USER_DIR)/ir_Aiwa.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Aiwa.cpp
|
||||
|
||||
ir_Denon.o : $(USER_DIR)/ir_Denon.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Denon.cpp
|
||||
|
||||
ir_Sanyo.o : $(USER_DIR)/ir_Sanyo.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Sanyo.cpp
|
||||
|
||||
ir_Daikin.o : $(USER_DIR)/ir_Daikin.cpp $(USER_DIR)/ir_Daikin.h $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Daikin.cpp
|
||||
|
||||
ir_Gree.o : $(USER_DIR)/ir_Gree.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Gree.cpp
|
||||
|
||||
ir_Pronto.o : $(USER_DIR)/ir_Pronto.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Pronto.cpp
|
||||
|
||||
ir_Nikai.o : $(USER_DIR)/ir_Nikai.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Nikai.cpp
|
||||
|
||||
ir_Toshiba.o : $(USER_DIR)/ir_Toshiba.h $(USER_DIR)/ir_Toshiba.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Toshiba.cpp
|
||||
|
||||
ir_Midea.o : $(USER_DIR)/ir_Midea.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Midea.cpp
|
||||
|
||||
ir_Magiquest.o : $(USER_DIR)/ir_Magiquest.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Magiquest.cpp
|
||||
|
||||
ir_Lasertag.o : $(USER_DIR)/ir_Lasertag.cpp $(USER_DIR)/ir_RC5_RC6.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Lasertag.cpp
|
||||
|
||||
ir_Carrier.o : $(USER_DIR)/ir_Carrier.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Carrier.cpp
|
||||
|
||||
ir_Haier.o : $(USER_DIR)/ir_Haier.cpp $(USER_DIR)/ir_Haier.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Haier.cpp
|
||||
|
||||
ir_Hitachi.o : $(USER_DIR)/ir_Hitachi.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Hitachi.cpp
|
||||
|
||||
ir_GICable.o : $(USER_DIR)/ir_GICable.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_GICable.cpp
|
||||
|
||||
ir_Whirlpool.o : $(USER_DIR)/ir_Whirlpool.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Whirlpool.cpp
|
||||
|
||||
ir_Lutron.o : $(USER_DIR)/ir_Lutron.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Lutron.cpp
|
||||
|
||||
ir_Electra.o : $(USER_DIR)/ir_Electra.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Electra.cpp
|
||||
|
||||
ir_Pioneer.o : $(USER_DIR)/ir_Pioneer.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Pioneer.cpp
|
||||
|
||||
ir_MWM.o : $(USER_DIR)/ir_MWM.cpp $(USER_DIR)/ir_RC5_RC6.cpp $(COMMON_DEPS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_MWM.cpp
|
||||
|
||||
ir_Vestel.o : $(USER_DIR)/ir_Vestel.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Vestel.cpp
|
||||
|
||||
ir_Teco.o : $(USER_DIR)/ir_Teco.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Teco.cpp
|
||||
|
||||
ir_Tcl.o : $(USER_DIR)/ir_Tcl.cpp $(USER_DIR)/ir_Tcl.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Tcl.cpp
|
||||
|
||||
ir_Trotec.o : $(USER_DIR)/ir_Trotec.cpp $(USER_DIR)/ir_Trotec.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Trotec.cpp
|
||||
|
||||
ir_Lego.o : $(USER_DIR)/ir_Lego.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(USER_DIR)/ir_Lego.cpp
|
||||
|
||||
ir_Argo.o : $(USER_DIR)/ir_Argo.cpp $(USER_DIR)/ir_Argo.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Argo.cpp
|
||||
|
||||
ir_Goodweather.o : $(USER_DIR)/ir_Goodweather.cpp $(USER_DIR)/ir_Goodweather.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Goodweather.cpp
|
||||
|
||||
ir_Neoclima.o : $(USER_DIR)/ir_Neoclima.cpp $(USER_DIR)/ir_Neoclima.h $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Neoclima.cpp
|
||||
|
||||
ir_Amcor.o : $(USER_DIR)/ir_Amcor.cpp $(USER_DIR)/ir_Amcor.h $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Amcor.cpp
|
||||
|
||||
ir_Epson.o : $(USER_DIR)/ir_Epson.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Epson.cpp
|
||||
|
||||
ir_Symphony.o : $(USER_DIR)/ir_Symphony.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Symphony.cpp
|
||||
|
||||
ir_Airwell.o : $(USER_DIR)/ir_Airwell.cpp $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/ir_Airwell.cpp
|
||||
|
||||
IRac.o : $(USER_DIR)/IRac.cpp $(USER_DIR)/IRac.h $(COMMON_DEPS) $(GTEST_HEADERS)
|
||||
$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) -c $(USER_DIR)/IRac.cpp
|
||||
|
|
@ -9,8 +9,8 @@
|
|||
This library enables you to **send _and_ receive** infra-red signals on an [ESP8266](https://github.com/esp8266/Arduino) or an
|
||||
[ESP32](https://github.com/espressif/arduino-esp32) using the [Arduino framework](https://www.arduino.cc/) using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48}* demodulators etc.
|
||||
|
||||
## v2.7.6 Now Available
|
||||
Version 2.7.6 of the library is now [available](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). You can view the [Release Notes](ReleaseNotes.md) for all the significant changes.
|
||||
## v2.7.7 Now Available
|
||||
Version 2.7.7 of the library is now [available](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). You can view the [Release Notes](ReleaseNotes.md) for all the significant changes.
|
||||
|
||||
#### Upgrading from pre-v2.0
|
||||
Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on our [Upgrade to v2.0](https://github.com/crankyoldgit/IRremoteESP8266/wiki/Upgrading-to-v2.0) page.
|
||||
|
|
@ -9,8 +9,8 @@
|
|||
Cette librairie vous permetra de **recevoir et d'envoyer des signaux** infrarouge sur le protocole [ESP8266](https://github.com/esp8266/Arduino) ou sur le protocole
|
||||
[ESP32](https://github.com/espressif/arduino-esp32) en utilisant le [Arduino framework](https://www.arduino.cc/) qui utilise la norme 940nm IR LEDs et le module basique de reception d'onde IR. Exemple : TSOP{17,22,24,36,38,44,48}* modules etc.
|
||||
|
||||
## v2.7.6 disponible
|
||||
Version 2.7.6 de la libraire est maintenant [disponible](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). Vous pouvez voir le [Release Notes](ReleaseNotes.md) pour tous les changements importants.
|
||||
## v2.7.7 disponible
|
||||
Version 2.7.7 de la libraire est maintenant [disponible](https://github.com/crankyoldgit/IRremoteESP8266/releases/latest). Vous pouvez voir le [Release Notes](ReleaseNotes.md) pour tous les changements importants.
|
||||
|
||||
#### mise à jour depuis pre-v2.0
|
||||
L'utilisation de la librairie à un peu changer depuis la version in v2.0. Si vous voulez l'utiliser vous devrez changer votre utilisation aussi. Vous pouvez vous renseigner sur les précondition d'utilisation ici : [Upgrade to v2.0](https://github.com/crankyoldgit/IRremoteESP8266/wiki/Upgrading-to-v2.0) page.
|
||||
|
|
@ -1,5 +1,36 @@
|
|||
# Release Notes
|
||||
|
||||
## _v2.7.7 (20200519)_
|
||||
|
||||
**[BREAKING CHANGES]**
|
||||
- Fix Symphony protocol. (#1107, #1105)
|
||||
* Now 12 bits and bits are inverted. All previous codes will no longer work.
|
||||
- IRMQTTServer: Better handle power & mode operations for Home Assistant. (#1099, #1092)
|
||||
* When `MQTT_CLIMATE_HA_MODE` is enabled (default) this will break previous operation mode resumption when power is changed.
|
||||
|
||||
**[Bug Fixes]**
|
||||
- Set correct return type for `.calibrate()` (#1095, #1093)
|
||||
|
||||
**[Features]**
|
||||
- Add basic support for Carrier 40 & 64 bit protocols. (#1125, #1112, #1127)
|
||||
- Gree: Enable native support for Fahrenheit (#1124, #1121)
|
||||
- Gree: Add option to control display temp source. (#1120, #1118)
|
||||
- Add support for Multibrackets protocol. (#1106, #1103)
|
||||
- Add RawToPronto.py tool & improve `sendPronto()` precision (#1104, #1103)
|
||||
- Add support for `Doshisha` LED light protocol (#1115)
|
||||
- Introduce IRrecvDumpV3 with basic OTA update support (#1111)
|
||||
- Add detailed support for Delonghi A/C (#1098, #1096)
|
||||
- Improved support for SharpAc. (#1094, #1091)
|
||||
- Update auto_analyse to use new decode call structure. (#1102, #1097)
|
||||
- Added Blynk app example (#1090)
|
||||
|
||||
**[Misc]**
|
||||
- update auto_analyse script to use new param documentation (#1126)
|
||||
- Improve `raw_to_pronto_code.py` (#1122, #1103)
|
||||
- Use pattern rules in Makefiles to reduce specific rule (#1110)
|
||||
- Update list of supported Daikin models. (#1101)
|
||||
|
||||
|
||||
## _v2.7.6 (20200425)_
|
||||
|
||||
**[Features]**
|
||||
|
|
@ -1,6 +1,6 @@
|
|||
<!--- WARNING: Do NOT edit this file directly.
|
||||
It is generated by './tools/scrape_supported_devices.py'.
|
||||
Last generated: Thu Apr 9 15:49:53 2020 --->
|
||||
Last generated: Tue 19 May 2020 11:48:47 +0000 --->
|
||||
# IR Protocols supported by this library
|
||||
|
||||
| Protocol | Brand | Model | A/C Model | Detailed A/C Support |
|
||||
|
|
@ -14,9 +14,11 @@
|
|||
| [Coolix](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Coolix.cpp) | **[Beko](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Coolix.h)** | BINR 070/071 split-type A/C<BR>BINR 070/071 split-type A/C<BR>RG57K7(B)/BGEF Remote<BR>RG57K7(B)/BGEF Remote | | Yes |
|
||||
| [Coolix](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Coolix.cpp) | **[Midea](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Coolix.h)** | MS12FU-10HRDN1-QRD0GW(B) A/C<BR>MS12FU-10HRDN1-QRD0GW(B) A/C<BR>MSABAU-07HRFN1-QRD0GW A/C (circa 2016)<BR>MSABAU-07HRFN1-QRD0GW A/C (circa 2016)<BR>RG52D/BGE Remote<BR>RG52D/BGE Remote | | Yes |
|
||||
| [Coolix](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Coolix.cpp) | **[Tokio](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Coolix.h)** | AATOEMF17-12CHR1SW split-type RG51\|50/BGE Remote<BR>AATOEMF17-12CHR1SW split-type RG51\|50/BGE Remote | | Yes |
|
||||
| [Daikin](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Daikin.cpp) | **[Daikin](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Daikin.h)** | 17 Series A/C (DAIKIN128)<BR>ARC423A5 remote<BR>ARC433** remote<BR>ARC433B69 remote<BR>ARC477A1 remote<BR>ARC480A5 remote (DAIKIN152)<BR>BRC4C153 remote<BR>BRC52B63 remote (DAIKIN128)<BR>DGS01 remote (DAIKIN64)<BR>FFN-C/FCN-F Series A/C (DAIKIN64)<BR>FTE12HV2S A/C<BR>FTXB09AXVJU A/C (DAIKIN128)<BR>FTXB12AXVJU A/C (DAIKIN128)<BR>FTXZ25NV1B A/C<BR>FTXZ35NV1B A/C<BR>FTXZ50NV1B A/C | | Yes |
|
||||
| [Daikin](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Daikin.cpp) | **[Daikin](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Daikin.h)** | 17 Series A/C (DAIKIN128)<BR>ARC423A5 remote<BR>ARC433** remote<BR>ARC433B69 remote<BR>ARC466A33 remote (DAIKIN)<BR>ARC477A1 remote<BR>ARC480A5 remote (DAIKIN152)<BR>BRC4C153 remote<BR>BRC52B63 remote (DAIKIN128)<BR>DGS01 remote (DAIKIN64)<BR>FFN-C/FCN-F Series A/C (DAIKIN64)<BR>FTE12HV2S A/C<BR>FTXB09AXVJU A/C (DAIKIN128)<BR>FTXB12AXVJU A/C (DAIKIN128)<BR>FTXM-M A/C (DAIKIN)<BR>FTXZ25NV1B A/C<BR>FTXZ35NV1B A/C<BR>FTXZ50NV1B A/C<BR>M Series A/C (DAIKIN) | | Yes |
|
||||
| [Delonghi](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Delonghi.cpp) | **[Delonghi](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Delonghi.h)** | PAC A95 | | Yes |
|
||||
| [Denon](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Denon.cpp) | **Unknown** | | | - |
|
||||
| [Dish](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Dish.cpp) | **DISH NETWORK** | echostar 301 | | - |
|
||||
| [Doshisha](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Doshisha.cpp) | **Doshisha** | CZ-S32D LED Light<BR>CZ-S38D LED Light<BR>CZ-S50D LED Light<BR>RCZ01 remote | | - |
|
||||
| [Electra](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Electra.cpp) | **[AUX](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Electra.h)** | KFR-35GW/BpNFW=3 A/C<BR>YKR-T/011 remote | | Yes |
|
||||
| [Electra](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Electra.cpp) | **[Electra](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Electra.h)** | Classic INV 17 / AXW12DCS A/C<BR>YKR-M/003E remote | | Yes |
|
||||
| [Epson](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Epson.cpp) | **Unknown** | | | - |
|
||||
|
|
@ -26,6 +28,7 @@
|
|||
| [GlobalCache](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_GlobalCache.cpp) | **Unknown** | | | - |
|
||||
| [Goodweather](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Goodweather.cpp) | **[Goodweather](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Goodweather.h)** | ZH/JT-03 remote | | Yes |
|
||||
| [Gree](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.cpp) | **[EKOKAI](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.h)** | A/C | YAW1F<BR>YBOFB | Yes |
|
||||
| [Gree](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.cpp) | **[Gree](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.h)** | YAA1FBF remote<BR>YB1F2F remote | YAW1F<BR>YBOFB | Yes |
|
||||
| [Gree](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.cpp) | **[Green](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.h)** | YBOFB remote<BR>YBOFB2 remote | YAW1F<BR>YBOFB | Yes |
|
||||
| [Gree](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.cpp) | **[RusClimate](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.h)** | EACS/I-09HAR_X/N3 A/C<BR>YAW1F remote | YAW1F<BR>YBOFB | Yes |
|
||||
| [Gree](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.cpp) | **[Ultimate](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Gree.h)** | Heat Pump | YAW1F<BR>YBOFB | Yes |
|
||||
|
|
@ -48,6 +51,7 @@
|
|||
| [Mitsubishi](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Mitsubishi.cpp) | **[Mitsubishi](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Mitsubishi.h)** | HC3000 Projector<BR>KM14A 0179213 remote<BR>MS-GK24VA A/C<BR>TV | | Yes |
|
||||
| [Mitsubishi](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Mitsubishi.cpp) | **[Mitsubishi Electric](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Mitsubishi.h)** | 001CP T7WE10714 remote<BR>KPOA remote<BR>MSH-A24WV / MUH-A24WV A/C<BR>PEAD-RP71JAA Ducted A/C | | Yes |
|
||||
| [MitsubishiHeavy](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_MitsubishiHeavy.cpp) | **[Mitsubishi Heavy Industries](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_MitsubishiHeavy.h)** | RKX502A001C remote<BR>RLA502A700B remote<BR>SRKxxZJ-S A/C<BR>SRKxxZM-S A/C<BR>SRKxxZMXA-S A/C | | Yes |
|
||||
| [Multibrackets](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Multibrackets.cpp) | **Multibrackets** | Motorized Swing mount large - 4500 | | - |
|
||||
| [NEC](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_NEC.cpp) | **[Aloka](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_NEC.h)** | SleepyLights LED Lamp | | - |
|
||||
| [NEC](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_NEC.cpp) | **[Toshiba](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_NEC.h)** | 42TL838 LCD TV | | - |
|
||||
| [NEC](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_NEC.cpp) | **[Yamaha](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_NEC.h)** | RAV561 remote<BR>RXV585B A/V Receiver | | - |
|
||||
|
|
@ -60,10 +64,14 @@
|
|||
| [RCMM](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_RCMM.cpp) | **Microsoft** | XBOX 360 | | - |
|
||||
| [Samsung](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Samsung.cpp) | **[Samsung](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Samsung.h)** | AR09FSSDAWKNFA A/C<BR>AR12HSSDBWKNEU A/C<BR>AR12KSFPEWQNET A/C<BR>AR12NXCXAWKXEU A/C<BR>DB63-03556X003 remote<BR>DB93-16761C remote<BR>IEC-R03 remote<BR>UA55H6300 TV | | Yes |
|
||||
| [Sanyo](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Sanyo.cpp) | **Unknown** | | | - |
|
||||
| [Sharp](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Sharp.cpp) | **[Sharp](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Sharp.h)** | AH-AxSAY A/C<BR>AY-ZP40KR A/C<BR>LC-52D62U TV | | Yes |
|
||||
| [Sharp](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Sharp.cpp) | **[Sharp](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Sharp.h)** | AH-AxSAY A/C<BR>AH-XP10NRY A/C<BR>AY-ZP40KR A/C<BR>CRMC-820JBEZ remote<BR>LC-52D62U TV | | Yes |
|
||||
| [Sherwood](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Sherwood.cpp) | **Sherwood** | RC-138 remote<BR>RD6505(B) Receiver | | - |
|
||||
| [Sony](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Sony.cpp) | **Sony** | HT-CT380 Soundbar (Uses 38kHz & 3 repeats) | | - |
|
||||
| [Symphony](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Symphony.cpp) | **Blyss** | Owen-SW-5 3 Fan<BR>WP-YK8 090218 remote | | - |
|
||||
| [Symphony](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Symphony.cpp) | **SamHop** | SM3015 Fan Remote Control<BR>SM5021 Encoder chip<BR>SM5032 Decoder chip | | - |
|
||||
| [Symphony](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Symphony.cpp) | **Satellite Electronic** | ID6 Remote<BR>JY199I Fan driver<BR>JY199I-L Fan driver | | - |
|
||||
| [Symphony](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Symphony.cpp) | **Symphony** | Air Cooler 3Di | | - |
|
||||
| [Symphony](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Symphony.cpp) | **Westinghouse** | 78095 Remote<BR>Ceiling fan | | - |
|
||||
| [Tcl](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Tcl.cpp) | **[Leberg](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Tcl.h)** | LBS-TOR07 A/C | | Yes |
|
||||
| [Teco](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Teco.cpp) | **[Alaska](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Teco.h)** | SAC9010QC A/C<BR>SAC9010QC remote | | Yes |
|
||||
| [Toshiba](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Toshiba.cpp) | **[Toshiba](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/src/ir_Toshiba.h)** | Akita EVO II<BR>RAS 18SKP-ES<BR>RAS-B13N3KV2<BR>RAS-B13N3KVP-E<BR>WC-L03SE<BR>WH-TA04NE | | Yes |
|
||||
|
|
@ -89,6 +97,8 @@
|
|||
- AMCOR
|
||||
- ARGO
|
||||
- CARRIER_AC
|
||||
- CARRIER_AC40
|
||||
- CARRIER_AC64
|
||||
- COOLIX
|
||||
- DAIKIN
|
||||
- DAIKIN128
|
||||
|
|
@ -98,8 +108,10 @@
|
|||
- DAIKIN2
|
||||
- DAIKIN216
|
||||
- DAIKIN64
|
||||
- DELONGHI_AC
|
||||
- DENON
|
||||
- DISH
|
||||
- DOSHISHA
|
||||
- ELECTRA_AC
|
||||
- EPSON
|
||||
- FUJITSU_AC
|
||||
|
|
@ -130,6 +142,7 @@
|
|||
- MITSUBISHI_AC
|
||||
- MITSUBISHI_HEAVY_152
|
||||
- MITSUBISHI_HEAVY_88
|
||||
- MULTIBRACKETS
|
||||
- MWM
|
||||
- NEC
|
||||
- NEC_LIKE
|
||||
|
|
@ -0,0 +1 @@
|
|||
Documentation goes here.
|
||||
|
|
@ -0,0 +1 @@
|
|||
theme: jekyll-theme-slate
|
||||
|
|
@ -0,0 +1,196 @@
|
|||
/*************************************************************
|
||||
Emulate a physical remote via an iOS and Android App.
|
||||
Copyright Gaurav Barwalia 2020
|
||||
|
||||
Download latest Blynk library here:
|
||||
https://github.com/blynkkk/blynk-library/releases/latest
|
||||
|
||||
Blynk is a platform with iOS and Android apps to control
|
||||
Arduino, Raspberry Pi and the likes over the Internet.
|
||||
You can easily build graphic interfaces for all your
|
||||
projects by simply dragging and dropping widgets.
|
||||
|
||||
Downloads, docs, tutorials: http://www.blynk.cc
|
||||
Sketch generator: http://examples.blynk.cc
|
||||
Blynk community: http://community.blynk.cc
|
||||
Follow us: http://www.fb.com/blynkapp
|
||||
http://twitter.com/blynk_app
|
||||
|
||||
Blynk library is licensed under MIT license
|
||||
This example code is in public domain.
|
||||
|
||||
*************************************************************
|
||||
This example runs directly on ESP8266 chip.
|
||||
|
||||
Note: This requires ESP8266 support package:
|
||||
https://github.com/esp8266/Arduino
|
||||
|
||||
Please be sure to select the right ESP8266 module
|
||||
in the Tools -> Board menu!
|
||||
|
||||
Change WiFi ssid, pass, and Blynk auth token to run :)
|
||||
Feel free to apply it to any other example. It's simple!
|
||||
*************************************************************/
|
||||
|
||||
/*
|
||||
// After decoding received below codes
|
||||
|
||||
// Power button
|
||||
|
||||
18:12:33.993 -> Protocol : NEC
|
||||
18:12:33.993 -> Code : 0x1FE50AF (32 Bits)
|
||||
18:12:33.993 -> uint16_t rawData[71] = {9040, 4452, 606, 532, 606, 534, 630, 508, 604, 534, 604, 534, 604, 534, 630, 506, 606, 1646, 632, 1620, 606, 1646, 632, 1620, 630, 1620, 632, 1620, 630, 1620, 606, 1646, 632, 506, 632, 506, 632, 1620, 632, 506, 632, 1620, 632, 506, 632, 508, 632, 506, 632, 506, 632, 1620, 632, 506, 632, 1624, 628, 506, 632, 1620, 632, 1618, 632, 1620, 632, 1620, 632, 39016, 9040, 2216, 630}; // NEC 1FE50AF
|
||||
18:12:34.027 -> uint32_t address = 0x80;
|
||||
18:12:34.027 -> uint32_t command = 0xA;
|
||||
18:12:34.027 -> uint64_t data = 0x1FE50AF;
|
||||
|
||||
//mute button
|
||||
|
||||
18:13:27.215 -> Protocol : NEC
|
||||
18:13:27.215 -> Code : 0x1FE30CF (32 Bits)
|
||||
18:13:27.215 -> uint16_t rawData[71] = {9094, 4398, 660, 478, 658, 480, 658, 480, 658, 480, 658, 480, 658, 480, 660, 480, 658, 1594, 658, 1594, 658, 1594, 658, 1594, 658, 1592, 658, 1594, 658, 1592, 658, 1594, 660, 480, 658, 480, 658, 480, 658, 1592, 658, 1592, 658, 480, 658, 480, 660, 478, 660, 478, 658, 1594, 658, 1592, 658, 480, 658, 480, 658, 1594, 658, 1592, 658, 1594, 658, 1594, 658, 38986, 9094, 2162, 658}; // NEC 1FE30CF
|
||||
18:13:27.285 -> uint32_t address = 0x80;
|
||||
18:13:27.285 -> uint32_t command = 0xC;
|
||||
18:13:27.285 -> uint64_t data = 0x1FE30CF;
|
||||
|
||||
//Vol. low
|
||||
|
||||
18:14:44.427 -> Protocol : NEC
|
||||
18:14:44.427 -> Code : 0x1FEC03F (32 Bits)
|
||||
18:14:44.427 -> uint16_t rawData[71] = {9120, 4374, 658, 478, 658, 480, 658, 480, 658, 480, 658, 482, 658, 478, 658, 480, 658, 1594, 658, 1594, 658, 1592, 660, 1594, 658, 1592, 658, 1594, 658, 1594, 658, 1592, 660, 480, 658, 1594, 658, 1594, 658, 480, 658, 480, 660, 480, 658, 480, 658, 480, 658, 480, 658, 480, 658, 480, 658, 1594, 660, 1592, 658, 1594, 658, 1594, 658, 1592, 658, 1594, 658, 39002, 9094, 2162, 658}; // NEC 1FEC03F
|
||||
18:14:44.497 -> uint32_t address = 0x80;
|
||||
18:14:44.497 -> uint32_t command = 0x3;
|
||||
18:14:44.497 -> uint64_t data = 0x1FEC03F;
|
||||
|
||||
//VOl. High
|
||||
|
||||
18:15:11.677 -> Protocol : NEC
|
||||
18:15:11.677 -> Code : 0x1FE40BF (32 Bits)
|
||||
18:15:11.677 -> uint16_t rawData[67] = {9068, 4426, 630, 506, 632, 508, 630, 508, 630, 508, 630, 508, 630, 508, 630, 508, 630, 1622, 630, 1622, 630, 1622, 630, 1622, 656, 1594, 630, 1622, 632, 1620, 630, 1622, 630, 508, 630, 508, 630, 1622, 630, 508, 630, 508, 630, 508, 630, 508, 630, 508, 630, 508, 630, 1622, 656, 482, 630, 1622, 630, 1622, 630, 1622, 630, 1622, 630, 1622, 632, 1620, 630}; // NEC 1FE40BF
|
||||
18:15:11.747 -> uint32_t address = 0x80;
|
||||
18:15:11.747 -> uint32_t command = 0x2;
|
||||
18:15:11.747 -> uint64_t data = 0x1FE40BF;
|
||||
|
||||
//Play/Pause
|
||||
|
||||
18:15:38.529 -> Protocol : NEC
|
||||
18:15:38.529 -> Code : 0x1FE32CD (32 Bits)
|
||||
18:15:38.529 -> uint16_t rawData[71] = {9092, 4400, 632, 504, 658, 480, 658, 480, 632, 506, 658, 480, 658, 480, 658, 482, 632, 1620, 658, 1594, 658, 1594, 632, 1618, 658, 1594, 658, 1594, 632, 1620, 632, 1618, 634, 506, 658, 480, 658, 480, 632, 1620, 658, 1598, 656, 478, 658, 478, 658, 1594, 658, 482, 632, 1618, 632, 1618, 634, 506, 632, 506, 658, 1594, 632, 1620, 658, 480, 632, 1620, 658, 38998, 9094, 2162, 660}; // NEC 1FE32CD
|
||||
18:15:38.564 -> uint32_t address = 0x80;
|
||||
18:15:38.564 -> uint32_t command = 0x4C;
|
||||
18:15:38.564 -> uint64_t data = 0x1FE32CD;
|
||||
|
||||
//Song Back
|
||||
|
||||
18:16:07.527 -> Protocol : NEC
|
||||
18:16:07.527 -> Code : 0x1FEA05F (32 Bits)
|
||||
18:16:07.562 -> uint16_t rawData[71] = {9590, 3902, 684, 452, 686, 456, 652, 480, 660, 480, 684, 456, 656, 480, 658, 480, 684, 1568, 658, 1594, 658, 1594, 686, 1566, 658, 1594, 684, 1568, 658, 1594, 658, 1594, 686, 454, 684, 1568, 686, 454, 658, 1594, 684, 454, 686, 454, 658, 480, 660, 480, 684, 454, 658, 482, 658, 1594, 682, 456, 658, 1596, 658, 1594, 686, 1568, 660, 1592, 684, 1568, 686, 38982, 9098, 2162, 684}; // NEC 1FEA05F
|
||||
18:16:07.597 -> uint32_t address = 0x80;
|
||||
18:16:07.597 -> uint32_t command = 0x5;
|
||||
18:16:07.597 -> uint64_t data = 0x1FEA05F;
|
||||
|
||||
//Song Forward
|
||||
|
||||
18:17:20.541 -> Protocol : NEC
|
||||
18:17:20.541 -> Code : 0x1FEE01F (32 Bits)
|
||||
18:17:20.575 -> uint16_t rawData[71] = {9068, 4424, 632, 506, 630, 506, 632, 508, 606, 532, 632, 506, 630, 508, 630, 508, 632, 1620, 632, 1620, 632, 1620, 604, 1646, 606, 1646, 630, 1622, 604, 1646, 632, 1620, 606, 534, 630, 1622, 604, 1646, 630, 1622, 604, 534, 630, 508, 604, 534, 606, 534, 630, 508, 630, 508, 606, 534, 606, 532, 630, 1622, 604, 1646, 632, 1620, 604, 1648, 604, 1646, 604, 39040, 9040, 2216, 604}; // NEC 1FEE01F
|
||||
18:17:20.610 -> uint32_t address = 0x80;
|
||||
18:17:20.610 -> uint32_t command = 0x7;
|
||||
18:17:20.610 -> uint64_t data = 0x1FEE01F;
|
||||
|
||||
*/
|
||||
|
||||
// check complete video tutorial here for program explanation https://www.youtube.com/watch?v=LqmkDKu54XY&t=17s
|
||||
|
||||
/* Comment this out to disable prints and save space */
|
||||
#define BLYNK_PRINT Serial
|
||||
|
||||
#if defined(ESP8266)
|
||||
#include <ESP8266WiFi.h>
|
||||
#include <BlynkSimpleEsp8266.h>
|
||||
#else
|
||||
#include <WiFi.h>
|
||||
#endif // ESP8266
|
||||
#if defined(ESP32)
|
||||
#include <BlynkSimpleEsp32.h>
|
||||
#endif // ESP32
|
||||
|
||||
// IR library
|
||||
#include <IRremoteESP8266.h>
|
||||
#include <IRsend.h>
|
||||
|
||||
const uint16_t kIrLed = 4; // ESP8266 GPIO pin to use. Recommended: 4 (D2).
|
||||
IRsend irsend(kIrLed); // Set the GPIO to be used to sending the message.
|
||||
|
||||
// You should get Auth Token in the Blynk App.
|
||||
// Go to the Project Settings (nut icon).
|
||||
char auth[] = "YourAuthToken";
|
||||
|
||||
// Your WiFi credentials.
|
||||
// Set password to "" for open networks.
|
||||
char ssid[] = "YourNetworkName";
|
||||
char pass[] = "YourPassword";
|
||||
|
||||
BLYNK_WRITE(V51) { // Power button
|
||||
if (param.asInt() == 0) {
|
||||
// Serial.println("NEC");
|
||||
irsend.sendNEC(0x1FE50AF);
|
||||
}
|
||||
}
|
||||
|
||||
BLYNK_WRITE(V52) { // Mute button
|
||||
if (param.asInt() == 0) {
|
||||
// Serial.println("NEC");
|
||||
irsend.sendNEC(0x1FE30CF);
|
||||
}
|
||||
}
|
||||
|
||||
BLYNK_WRITE(V53) { // Song Forward
|
||||
if (param.asInt() == 0) {
|
||||
// Serial.println("NEC");
|
||||
irsend.sendNEC(0x1FEE01F);
|
||||
}
|
||||
}
|
||||
|
||||
BLYNK_WRITE(V54) { // Song Backward
|
||||
if (param.asInt() == 0) {
|
||||
// Serial.println("NEC");
|
||||
irsend.sendNEC(0x1FEA05F);
|
||||
delay(10); // double tap back button to back one song
|
||||
irsend.sendNEC(0x1FEA05F);
|
||||
}
|
||||
}
|
||||
|
||||
BLYNK_WRITE(V55) { // Volume --
|
||||
if (param.asInt() == 0) {
|
||||
// Serial.println("NEC");
|
||||
irsend.sendNEC(0x1FEC03F);
|
||||
}
|
||||
}
|
||||
|
||||
BLYNK_WRITE(V56) { // Volume ++
|
||||
if (param.asInt() == 0) {
|
||||
// Serial.println("NEC");
|
||||
irsend.sendNEC(0x1FE40BF);
|
||||
}
|
||||
}
|
||||
|
||||
BLYNK_WRITE(V57) { // Play/Pause
|
||||
if (param.asInt() == 0) {
|
||||
// Serial.println("NEC");
|
||||
irsend.sendNEC(0x1FE32CD);
|
||||
}
|
||||
}
|
||||
|
||||
void setup() {
|
||||
#if defined(BLYNK_PRINT)
|
||||
// Debug console
|
||||
Serial.begin(115200);
|
||||
#endif // BLYNK_PRINT
|
||||
|
||||
Blynk.begin(auth, ssid, pass);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
Blynk.run();
|
||||
}
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
[platformio]
|
||||
src_dir = .
|
||||
|
||||
[env]
|
||||
lib_extra_dirs = ../../
|
||||
lib_ldf_mode = deep+
|
||||
lib_ignore = examples
|
||||
framework = arduino
|
||||
platform = espressif8266
|
||||
build_flags = ; -D_IR_LOCALE_=en-AU
|
||||
|
||||
[common]
|
||||
lib_deps_builtin =
|
||||
lib_deps_external =
|
||||
Blynk
|
||||
|
||||
[common_esp8266]
|
||||
lib_deps_external =
|
||||
${common.lib_deps_builtin}
|
||||
${common.lib_deps_external}
|
||||
|
||||
[common_esp32]
|
||||
lib_deps_external =
|
||||
${common.lib_deps_builtin}
|
||||
${common.lib_deps_external}
|
||||
|
||||
[env:nodemcuv2]
|
||||
board = nodemcuv2
|
||||
lib_deps = ${common_esp8266.lib_deps_external}
|
||||
|
||||
[env:esp32dev]
|
||||
platform = espressif32
|
||||
board = esp32dev
|
||||
lib_deps = ${common_esp32.lib_deps_external}
|
||||
|
|
@ -102,11 +102,23 @@ const uint32_t kMqttReconnectTime = 5000; // Delay(ms) between reconnect tries.
|
|||
#define MQTT_CLIMATE_STAT "stat" // Sub-topic for the climate stat topics.
|
||||
// Enable sending/receiving climate via JSON. `true` cost ~5k of program space.
|
||||
#define MQTT_CLIMATE_JSON false
|
||||
|
||||
// Use Home Assistant-style operation modes.
|
||||
// i.e. Change the climate mode to "off" when turning the power "off".
|
||||
// TL;DR: Power and Mode are linked together. One changes the other.
|
||||
// i.e.
|
||||
// - When power is set to "off", the mode is set to "off".
|
||||
// - When the mode changes from "off" to something else, power is set to "on".
|
||||
// See: https://www.home-assistant.io/components/climate.mqtt/#modes
|
||||
// Change to false, if your home automation system doesn't like this.
|
||||
// *** WARNING ***
|
||||
// This setting will cause IRMQTTServer to forget what the previous operation
|
||||
// mode was. e.g. a power "on" -> "off" -> "on" will cause it to use the
|
||||
// default mode for your A/C, not the previous mode.
|
||||
// Typically this is "Auto" or "Cool" mode.
|
||||
// Change to false, if your home automation system doesn't like this, or if
|
||||
// you want IRMQTTServer to be the authoritative source for controling your
|
||||
// A/C.
|
||||
#define MQTT_CLIMATE_HA_MODE true
|
||||
|
||||
// Do we send an IR message when we reboot and recover the existing A/C state?
|
||||
// If set to `false` you may miss requested state changes while the ESP was
|
||||
// down. If set to `true`, it will resend the previous desired state sent to the
|
||||
|
|
@ -239,7 +251,7 @@ const uint16_t kJsonAcStateMaxSize = 1024; // Bytes
|
|||
// ----------------- End of User Configuration Section -------------------------
|
||||
|
||||
// Constants
|
||||
#define _MY_VERSION_ "v1.4.9"
|
||||
#define _MY_VERSION_ "v1.5.0"
|
||||
|
||||
const uint8_t kRebootTime = 15; // Seconds
|
||||
const uint8_t kQuickDisplayTime = 2; // Seconds
|
||||
|
|
@ -2964,40 +2964,47 @@ void updateClimate(stdAc::state_t *state, const String str,
|
|||
*state = jsonToState(*state, payload.c_str());
|
||||
else
|
||||
#endif // MQTT_CLIMATE_JSON
|
||||
if (str.equals(prefix + KEY_PROTOCOL))
|
||||
if (str.equals(prefix + KEY_PROTOCOL)) {
|
||||
state->protocol = strToDecodeType(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_MODEL))
|
||||
} else if (str.equals(prefix + KEY_MODEL)) {
|
||||
state->model = IRac::strToModel(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_POWER))
|
||||
} else if (str.equals(prefix + KEY_POWER)) {
|
||||
state->power = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_MODE))
|
||||
#if MQTT_CLIMATE_HA_MODE
|
||||
if (!state->power) state->mode = stdAc::opmode_t::kOff;
|
||||
#endif // MQTT_CLIMATE_HA_MODE
|
||||
} else if (str.equals(prefix + KEY_MODE)) {
|
||||
state->mode = IRac::strToOpmode(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_TEMP))
|
||||
#if MQTT_CLIMATE_HA_MODE
|
||||
state->power = (state->mode != stdAc::opmode_t::kOff);
|
||||
#endif // MQTT_CLIMATE_HA_MODE
|
||||
} else if (str.equals(prefix + KEY_TEMP)) {
|
||||
state->degrees = payload.toFloat();
|
||||
else if (str.equals(prefix + KEY_FANSPEED))
|
||||
} else if (str.equals(prefix + KEY_FANSPEED)) {
|
||||
state->fanspeed = IRac::strToFanspeed(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_SWINGV))
|
||||
} else if (str.equals(prefix + KEY_SWINGV)) {
|
||||
state->swingv = IRac::strToSwingV(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_SWINGH))
|
||||
} else if (str.equals(prefix + KEY_SWINGH)) {
|
||||
state->swingh = IRac::strToSwingH(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_QUIET))
|
||||
} else if (str.equals(prefix + KEY_QUIET)) {
|
||||
state->quiet = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_TURBO))
|
||||
} else if (str.equals(prefix + KEY_TURBO)) {
|
||||
state->turbo = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_ECONO))
|
||||
} else if (str.equals(prefix + KEY_ECONO)) {
|
||||
state->econo = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_LIGHT))
|
||||
} else if (str.equals(prefix + KEY_LIGHT)) {
|
||||
state->light = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_BEEP))
|
||||
} else if (str.equals(prefix + KEY_BEEP)) {
|
||||
state->beep = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_FILTER))
|
||||
} else if (str.equals(prefix + KEY_FILTER)) {
|
||||
state->filter = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_CLEAN))
|
||||
} else if (str.equals(prefix + KEY_CLEAN)) {
|
||||
state->clean = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_CELSIUS))
|
||||
} else if (str.equals(prefix + KEY_CELSIUS)) {
|
||||
state->celsius = IRac::strToBool(payload.c_str());
|
||||
else if (str.equals(prefix + KEY_SLEEP))
|
||||
} else if (str.equals(prefix + KEY_SLEEP)) {
|
||||
state->sleep = payload.toInt();
|
||||
}
|
||||
}
|
||||
|
||||
bool sendClimate(const String topic_prefix, const bool retain,
|
||||
|
|
@ -0,0 +1,71 @@
|
|||
// Copyright 2020 Christian Nilsson (@nikize)
|
||||
// Based on public Arduino BasicOTA example
|
||||
|
||||
#ifndef EXAMPLES_IRRECVDUMPV3_BASEOTA_H_
|
||||
#define EXAMPLES_IRRECVDUMPV3_BASEOTA_H_
|
||||
|
||||
#ifndef OTA_ENABLE
|
||||
#define OTA_ENABLE false
|
||||
#endif // OTA_ENABLE
|
||||
|
||||
#if OTA_ENABLE
|
||||
|
||||
#include <WiFi.h>
|
||||
#include <ESPmDNS.h>
|
||||
#include <WiFiUdp.h>
|
||||
#include <ArduinoOTA.h>
|
||||
|
||||
void OTAwifi() {
|
||||
// start default wifi (previously saved on the ESP) for OTA
|
||||
WiFi.mode(WIFI_STA);
|
||||
WiFi.begin();
|
||||
}
|
||||
|
||||
void OTAinit() {
|
||||
// See BasicOTA ESP example for source and settings
|
||||
|
||||
ArduinoOTA
|
||||
.onStart([]() {
|
||||
String type;
|
||||
if (ArduinoOTA.getCommand() == U_FLASH)
|
||||
type = "sketch";
|
||||
else
|
||||
type = "filesystem";
|
||||
|
||||
Serial.println("Start updating " + type);
|
||||
})
|
||||
.onEnd([]() {
|
||||
Serial.println("\nEnd");
|
||||
})
|
||||
.onProgress([](unsigned int progress, unsigned int total) {
|
||||
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
|
||||
})
|
||||
.onError([](ota_error_t error) {
|
||||
Serial.printf("Error[%u]: ", error);
|
||||
if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
|
||||
else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
|
||||
else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
|
||||
else if (error == OTA_RECEIVE_ERROR) Serial.println("Receive Failed");
|
||||
else if (error == OTA_END_ERROR) Serial.println("End Failed");
|
||||
});
|
||||
|
||||
ArduinoOTA.begin();
|
||||
Serial.println();
|
||||
if (WiFi.waitForConnectResult() == WL_CONNECTED) {
|
||||
Serial.print("IP address: ");
|
||||
Serial.println(WiFi.localIP());
|
||||
} else {
|
||||
Serial.println("Wifi Connection Failed.");
|
||||
}
|
||||
}
|
||||
|
||||
void OTAloopHandler() {
|
||||
ArduinoOTA.handle();
|
||||
}
|
||||
|
||||
#else // OTA_ENABLE
|
||||
void OTAwifi() {}
|
||||
void OTAinit() {}
|
||||
void OTAloopHandler() {}
|
||||
#endif // OTA_ENABLE
|
||||
#endif // EXAMPLES_IRRECVDUMPV3_BASEOTA_H_
|
||||
|
|
@ -0,0 +1,166 @@
|
|||
/*
|
||||
* IRremoteESP8266: IRrecvDumpV3 - dump details of IR codes with IRrecv
|
||||
* An IR detector/demodulator must be connected to the input kRecvPin.
|
||||
*
|
||||
* Copyright 2009 Ken Shirriff, http://arcfn.com
|
||||
* Copyright 2017-2019 David Conran
|
||||
*
|
||||
* Example circuit diagram:
|
||||
* https://github.com/crankyoldgit/IRremoteESP8266/wiki#ir-receiving
|
||||
*
|
||||
* Changes:
|
||||
* Version 1.1 May, 2020
|
||||
* - Create DumpV3 from DumpV2
|
||||
* - Add OTA Base
|
||||
* Version 1.0 October, 2019
|
||||
* - Internationalisation (i18n) support.
|
||||
* - Stop displaying the legacy raw timing info.
|
||||
* Version 0.5 June, 2019
|
||||
* - Move A/C description to IRac.cpp.
|
||||
* Version 0.4 July, 2018
|
||||
* - Minor improvements and more A/C unit support.
|
||||
* Version 0.3 November, 2017
|
||||
* - Support for A/C decoding for some protocols.
|
||||
* Version 0.2 April, 2017
|
||||
* - Decode from a copy of the data so we can start capturing faster thus
|
||||
* reduce the likelihood of miscaptures.
|
||||
* Based on Ken Shirriff's IrsendDemo Version 0.1 July, 2009,
|
||||
*/
|
||||
|
||||
// Allow over air update
|
||||
// #define OTA_ENABLE true
|
||||
#include "BaseOTA.h"
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <IRrecv.h>
|
||||
#include <IRremoteESP8266.h>
|
||||
#include <IRac.h>
|
||||
#include <IRtext.h>
|
||||
#include <IRutils.h>
|
||||
|
||||
// ==================== start of TUNEABLE PARAMETERS ====================
|
||||
// An IR detector/demodulator is connected to GPIO pin 14
|
||||
// e.g. D5 on a NodeMCU board.
|
||||
// Note: GPIO 16 won't work on the ESP8266 as it does not have interrupts.
|
||||
const uint16_t kRecvPin = 14;
|
||||
|
||||
// The Serial connection baud rate.
|
||||
// i.e. Status message will be sent to the PC at this baud rate.
|
||||
// Try to avoid slow speeds like 9600, as you will miss messages and
|
||||
// cause other problems. 115200 (or faster) is recommended.
|
||||
// NOTE: Make sure you set your Serial Monitor to the same speed.
|
||||
const uint32_t kBaudRate = 115200;
|
||||
|
||||
// As this program is a special purpose capture/decoder, let us use a larger
|
||||
// than normal buffer so we can handle Air Conditioner remote codes.
|
||||
const uint16_t kCaptureBufferSize = 1024;
|
||||
|
||||
// kTimeout is the Nr. of milli-Seconds of no-more-data before we consider a
|
||||
// message ended.
|
||||
// This parameter is an interesting trade-off. The longer the timeout, the more
|
||||
// complex a message it can capture. e.g. Some device protocols will send
|
||||
// multiple message packets in quick succession, like Air Conditioner remotes.
|
||||
// Air Coniditioner protocols often have a considerable gap (20-40+ms) between
|
||||
// packets.
|
||||
// The downside of a large timeout value is a lot of less complex protocols
|
||||
// send multiple messages when the remote's button is held down. The gap between
|
||||
// them is often also around 20+ms. This can result in the raw data be 2-3+
|
||||
// times larger than needed as it has captured 2-3+ messages in a single
|
||||
// capture. Setting a low timeout value can resolve this.
|
||||
// So, choosing the best kTimeout value for your use particular case is
|
||||
// quite nuanced. Good luck and happy hunting.
|
||||
// NOTE: Don't exceed kMaxTimeoutMs. Typically 130ms.
|
||||
#if DECODE_AC
|
||||
// Some A/C units have gaps in their protocols of ~40ms. e.g. Kelvinator
|
||||
// A value this large may swallow repeats of some protocols
|
||||
const uint8_t kTimeout = 50;
|
||||
#else // DECODE_AC
|
||||
// Suits most messages, while not swallowing many repeats.
|
||||
const uint8_t kTimeout = 15;
|
||||
#endif // DECODE_AC
|
||||
// Alternatives:
|
||||
// const uint8_t kTimeout = 90;
|
||||
// Suits messages with big gaps like XMP-1 & some aircon units, but can
|
||||
// accidentally swallow repeated messages in the rawData[] output.
|
||||
//
|
||||
// const uint8_t kTimeout = kMaxTimeoutMs;
|
||||
// This will set it to our currently allowed maximum.
|
||||
// Values this high are problematic because it is roughly the typical boundary
|
||||
// where most messages repeat.
|
||||
// e.g. It will stop decoding a message and start sending it to serial at
|
||||
// precisely the time when the next message is likely to be transmitted,
|
||||
// and may miss it.
|
||||
|
||||
// Set the smallest sized "UNKNOWN" message packets we actually care about.
|
||||
// This value helps reduce the false-positive detection rate of IR background
|
||||
// noise as real messages. The chances of background IR noise getting detected
|
||||
// as a message increases with the length of the kTimeout value. (See above)
|
||||
// The downside of setting this message too large is you can miss some valid
|
||||
// short messages for protocols that this library doesn't yet decode.
|
||||
//
|
||||
// Set higher if you get lots of random short UNKNOWN messages when nothing
|
||||
// should be sending a message.
|
||||
// Set lower if you are sure your setup is working, but it doesn't see messages
|
||||
// from your device. (e.g. Other IR remotes work.)
|
||||
// NOTE: Set this value very high to effectively turn off UNKNOWN detection.
|
||||
const uint16_t kMinUnknownSize = 12;
|
||||
|
||||
// Legacy (No longer supported!)
|
||||
//
|
||||
// Change to `true` if you miss/need the old "Raw Timing[]" display.
|
||||
#define LEGACY_TIMING_INFO false
|
||||
// ==================== end of TUNEABLE PARAMETERS ====================
|
||||
|
||||
// Use turn on the save buffer feature for more complete capture coverage.
|
||||
IRrecv irrecv(kRecvPin, kCaptureBufferSize, kTimeout, true);
|
||||
decode_results results; // Somewhere to store the results
|
||||
|
||||
// This section of code runs only once at start-up.
|
||||
void setup() {
|
||||
OTAwifi(); // start default wifi (previously saved on the ESP) for OTA
|
||||
#if defined(ESP8266)
|
||||
Serial.begin(kBaudRate, SERIAL_8N1, SERIAL_TX_ONLY);
|
||||
#else // ESP8266
|
||||
Serial.begin(kBaudRate, SERIAL_8N1);
|
||||
#endif // ESP8266
|
||||
while (!Serial) // Wait for the serial connection to be establised.
|
||||
delay(50);
|
||||
Serial.printf("\n" D_STR_IRRECVDUMP_STARTUP "\n", kRecvPin);
|
||||
OTAinit(); // setup OTA handlers and show IP
|
||||
#if DECODE_HASH
|
||||
// Ignore messages with less than minimum on or off pulses.
|
||||
irrecv.setUnknownThreshold(kMinUnknownSize);
|
||||
#endif // DECODE_HASH
|
||||
irrecv.enableIRIn(); // Start the receiver
|
||||
}
|
||||
|
||||
// The repeating section of the code
|
||||
void loop() {
|
||||
// Check if the IR code has been received.
|
||||
if (irrecv.decode(&results)) {
|
||||
// Display a crude timestamp.
|
||||
uint32_t now = millis();
|
||||
Serial.printf(D_STR_TIMESTAMP " : %06u.%03u\n", now / 1000, now % 1000);
|
||||
// Check if we got an IR message that was to big for our capture buffer.
|
||||
if (results.overflow)
|
||||
Serial.printf(D_WARN_BUFFERFULL "\n", kCaptureBufferSize);
|
||||
// Display the library version the message was captured with.
|
||||
Serial.println(D_STR_LIBRARY " : v" _IRREMOTEESP8266_VERSION_ "\n");
|
||||
// Display the basic output of what we found.
|
||||
Serial.print(resultToHumanReadableBasic(&results));
|
||||
// Display any extra A/C info if we have it.
|
||||
String description = IRAcUtils::resultAcToString(&results);
|
||||
if (description.length()) Serial.println(D_STR_MESGDESC ": " + description);
|
||||
yield(); // Feed the WDT as the text output can take a while to print.
|
||||
#if LEGACY_TIMING_INFO
|
||||
// Output legacy RAW timing info of the result.
|
||||
Serial.println(resultToTimingInfo(&results));
|
||||
yield(); // Feed the WDT (again)
|
||||
#endif // LEGACY_TIMING_INFO
|
||||
// Output the results as source code
|
||||
Serial.println(resultToSourceCode(&results));
|
||||
Serial.println(); // Blank line between entries
|
||||
yield(); // Feed the WDT (again)
|
||||
}
|
||||
OTAloopHandler();
|
||||
}
|
||||
|
|
@ -0,0 +1,52 @@
|
|||
[platformio]
|
||||
src_dir = .
|
||||
|
||||
[env]
|
||||
; Default platform
|
||||
platform = espressif8266
|
||||
; Default board
|
||||
board = nodemcuv2
|
||||
framework = arduino
|
||||
lib_extra_dirs = ../../
|
||||
lib_ldf_mode = deep+
|
||||
lib_ignore = examples
|
||||
build_flags = ; -D_IR_LOCALE_=en-AU
|
||||
|
||||
[env:nodemcuv2]
|
||||
board = nodemcuv2
|
||||
; build_flags = -D_IR_LOCALE_=en-AU
|
||||
|
||||
[env:esp32dev]
|
||||
platform = espressif32
|
||||
board = esp32dev
|
||||
; build_flags = -D_IR_LOCALE_=en-AU
|
||||
|
||||
[env:de-CH]
|
||||
build_flags = -D_IR_LOCALE_=de-CH ; German (Swiss)
|
||||
|
||||
[env:de-DE]
|
||||
build_flags = -D_IR_LOCALE_=de-DE ; German
|
||||
|
||||
[env:en-AU]
|
||||
build_flags = -D_IR_LOCALE_=en-AU ; English (Australian) (Default)
|
||||
|
||||
[env:en-IE]
|
||||
build_flags = -D_IR_LOCALE_=en-IE ; English (Irish)
|
||||
|
||||
[env:en-UK]
|
||||
build_flags = -D_IR_LOCALE_=en-UK ; English (UK)
|
||||
|
||||
[env:en-US]
|
||||
build_flags = -D_IR_LOCALE_=en-US ; English (Simplified) (USA)
|
||||
|
||||
[env:es-ES]
|
||||
build_flags = -D_IR_LOCALE_=es-ES ; Spanish
|
||||
|
||||
[env:fr-FR]
|
||||
build_flags = -D_IR_LOCALE_=fr-FR ; French
|
||||
|
||||
[env:it-IT]
|
||||
build_flags = -D_IR_LOCALE_=it-IT ; Italian
|
||||
|
||||
[env:zh-CN]
|
||||
build_flags = -D_IR_LOCALE_=zh-CN ; Chinese (Simplified)
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue