mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Fix Shelly 2.5 higher temperature 

Fix Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991)
This commit is contained in:
Theo Arends 2020-09-24 12:07:23 +02:00
parent beaf5afde8
commit 2b160912f5
3 changed files with 8 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
RELEASENOTES.md
View File

@ -61,6 +61,9 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
- Fix crash in ``ZbRestore``
- Fix reset BMP sensors when executing command ``SaveData`` and define USE_DEEPSLEEP enabled (#9300)
- Fix ``status 0`` message when using define USE_MQTT_TLS due to small log buffer (#9305)
- Fix ``status 13`` exception 9 when more than one shutter is configured
- Fix ``status 13`` json message
- Fix Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991)
- Change replace ArduinoJson with JSMN for JSON parsing
- Add command ``SetOption110 1`` to disable Zigbee auto-config when pairing new devices
- Add command ``SetOption111 1`` to enable frequency output for buzzer GPIO (#8994)

3
tasmota/CHANGELOG.md
View File

@ -8,6 +8,9 @@
- Fix crash in ``ZbRestore``
- Fix reset BMP sensors when executing command ``SaveData`` and define USE_DEEPSLEEP enabled (#9300)
- Fix ``status 0`` message when using define USE_MQTT_TLS due to small log buffer (#9305)
- Fix ``status 13`` exception 9 when more than one shutter is configured
- Fix ``status 13`` json message
- Fix Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991)
- Change replace ArduinoJson with JSMN for JSON parsing
- Add command ``SetOption110 1`` to disable Zigbee auto-config when pairing new devices
- Add command ``SetOption111 1`` to enable frequency output for buzzer GPIO (#8994)

1
tasmota/xnrg_07_ade7953.ino
View File

@ -200,6 +200,7 @@ void Ade7953EnergyEverySecond(void)
void Ade7953DrvInit(void)
{
if (PinUsed(GPIO_ADE7953_IRQ)) { // Irq on GPIO16 is not supported...
pinMode(Pin(GPIO_ADE7953_IRQ), INPUT); // Related to resetPins() - Must be set to input
delay(100); // Need 100mS to init ADE7953
if (I2cSetDevice(ADE7953_ADDR)) {
if (HLW_PREF_PULSE == Settings.energy_power_calibration) {