mirror of https://github.com/arendst/Tasmota.git
Add comments and some default defines
This commit is contained in:
Theo Arends
parent
69d3fc1003
commit
2c3785c1c6
|
|
@ -24,38 +24,38 @@
|
|||
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
|
||||
uint32_t data; // Allow bit manipulation using SetOption
|
||||
struct { // SetOption0 .. SetOption31
|
||||
uint32_t save_state : 1; // bit 0 - SetOption0 - (Settings) Save power state (1) and use after restart
|
||||
uint32_t button_restrict : 1; // bit 1 - SetOption1 - (Button) Control button single press (1) or multipress (0)
|
||||
uint32_t save_state : 1; // bit 0 - SetOption0 - SAVE_STATE - (Settings) Save power state (1) and use after restart
|
||||
uint32_t button_restrict : 1; // bit 1 - SetOption1 - KEY_DISABLE_MULTIPRESS - (Button) Control button single press (1) or multipress (0)
|
||||
uint32_t mqtt_add_global_info : 1; // bit 2 - SetOption2 - (MQTT) Add global temperature/humidity/pressure info to JSON sensor message
|
||||
uint32_t mqtt_enabled : 1; // bit 3 - SetOption3 - (MQTT) Enable (1)
|
||||
uint32_t mqtt_response : 1; // bit 4 - SetOption4 - (MQTT) Switch between RESULT (0) or COMMAND (1)
|
||||
uint32_t mqtt_power_retain : 1; // bit 5 - CMND_POWERRETAIN
|
||||
uint32_t mqtt_button_retain : 1; // bit 6 - CMND_BUTTONRETAIN
|
||||
uint32_t mqtt_switch_retain : 1; // bit 7 - CMND_SWITCHRETAIN
|
||||
uint32_t temperature_conversion : 1; // bit 8 - SetOption8 - (Temperature) Switch between Celsius (0) or Fahrenheit (1)
|
||||
uint32_t mqtt_enabled : 1; // bit 3 - SetOption3 - MQTT_USE - (MQTT) Enable (1)
|
||||
uint32_t mqtt_response : 1; // bit 4 - SetOption4 - MQTT_RESULT_COMMAND - (MQTT) Switch between RESULT (0) or COMMAND (1)
|
||||
uint32_t mqtt_power_retain : 1; // bit 5 - CMND_POWERRETAIN - MQTT_POWER_RETAIN
|
||||
uint32_t mqtt_button_retain : 1; // bit 6 - CMND_BUTTONRETAIN - MQTT_BUTTON_RETAIN
|
||||
uint32_t mqtt_switch_retain : 1; // bit 7 - CMND_SWITCHRETAIN - MQTT_SWITCH_RETAIN
|
||||
uint32_t temperature_conversion : 1; // bit 8 - SetOption8 - TEMP_CONVERSION - (Temperature) Switch between Celsius (0) or Fahrenheit (1)
|
||||
uint32_t mqtt_sensor_retain : 1; // bit 9 - CMND_SENSORRETAIN
|
||||
uint32_t mqtt_offline : 1; // bit 10 - SetOption10 - (MQTT) Control LWT message format, Offline (1) or none (0)
|
||||
uint32_t button_swap : 1; // bit 11 (v5.1.6) - SetOption11 - (Button) Swap (1) button single and double press functionality
|
||||
uint32_t stop_flash_rotate : 1; // bit 12 (v5.2.0) - SetOption12 - (Settings) Switch between dynamic (0) or fixed (1) slot flash save location
|
||||
uint32_t button_single : 1; // bit 13 (v5.4.0) - SetOption13 - (Button) Support only single press (1) to speed up button press recognition
|
||||
uint32_t interlock : 1; // bit 14 (v5.6.0) - CMND_INTERLOCK - Enable (1) /disable (0) interlock
|
||||
uint32_t pwm_control : 1; // bit 15 (v5.8.1) - SetOption15 - (Light) Switch between commands PWM (0) or COLOR/DIMMER/CT/CHANNEL (1)
|
||||
uint32_t ws_clock_reverse : 1; // bit 16 (v5.8.1) - SetOption16 - (WS2812) Switch between clockwise (0) or counter-clockwise (1)
|
||||
uint32_t decimal_text : 1; // bit 17 (v5.8.1) - SetOption17 - (Light) Switch between decimal (1) or hexadecimal (0) output
|
||||
uint32_t light_signal : 1; // bit 18 (v5.10.0c) - SetOption18 - (Light) Pair light signal (1) with CO2 sensor
|
||||
uint32_t hass_discovery : 1; // bit 19 (v5.11.1a) - SetOption19 - (HAss) Control automatic discovery (1) (See SetOption59)
|
||||
uint32_t not_power_linked : 1; // bit 20 (v5.11.1f) - SetOption20 - (Light) Control power in relation to Dimmer/Color/Ct changes (1)
|
||||
uint32_t no_power_on_check : 1; // bit 21 (v5.11.1i) - SetOption21 - (Energy) Show voltage even if powered off (1)
|
||||
uint32_t mqtt_offline : 1; // bit 10 - SetOption10 - MQTT_LWT_MESSAGE - (MQTT) Control LWT message format, Offline (1) or none (0)
|
||||
uint32_t button_swap : 1; // bit 11 (v5.1.6) - SetOption11 - KEY_SWAP_DOUBLE_PRESS - (Button) Swap (1) button single and double press functionality
|
||||
uint32_t stop_flash_rotate : 1; // bit 12 (v5.2.0) - SetOption12 - APP_FLASH_CYCLE - (Settings) Switch between dynamic (0) or fixed (1) slot flash save location
|
||||
uint32_t button_single : 1; // bit 13 (v5.4.0) - SetOption13 - KEY_ONLY_SINGLE_PRESS - (Button) Support only single press (1) to speed up button press recognition
|
||||
uint32_t interlock : 1; // bit 14 (v5.6.0) - CMND_INTERLOCK - APP_INTERLOCK_MODE - Enable (1) /disable (0) interlock
|
||||
uint32_t pwm_control : 1; // bit 15 (v5.8.1) - SetOption15 - LIGHT_MODE - (Light) Switch between commands PWM (0) or COLOR/DIMMER/CT/CHANNEL (1)
|
||||
uint32_t ws_clock_reverse : 1; // bit 16 (v5.8.1) - SetOption16 - LIGHT_CLOCK_DIRECTION - (WS2812) Switch between clockwise (0) or counter-clockwise (1)
|
||||
uint32_t decimal_text : 1; // bit 17 (v5.8.1) - SetOption17 - LIGHT_COLOR_RADIX - (Light) Switch between decimal (1) or hexadecimal (0) output
|
||||
uint32_t light_signal : 1; // bit 18 (v5.10.0c) - SetOption18 - LIGHT_PAIRS_CO2 - (Light) Pair light signal (1) with CO2 sensor
|
||||
uint32_t hass_discovery : 1; // bit 19 (v5.11.1a) - SetOption19 - HOME_ASSISTANT_DISCOVERY_ENABLE - (HAss) Control automatic discovery (1) (See SetOption59)
|
||||
uint32_t not_power_linked : 1; // bit 20 (v5.11.1f) - SetOption20 - LIGHT_POWER_CONTROL - (Light) Control power in relation to Dimmer/Color/Ct changes (1)
|
||||
uint32_t no_power_on_check : 1; // bit 21 (v5.11.1i) - SetOption21 - ENERGY_VOLTAGE_ALWAYS - (Energy) Show voltage even if powered off (1)
|
||||
uint32_t mqtt_serial : 1; // bit 22 (v5.12.0f) - CMND_SERIALSEND and CMND_SERIALLOG
|
||||
uint32_t mqtt_serial_raw : 1; // bit 23 (v6.1.1c) - CMND_SERIALSEND3
|
||||
uint32_t pressure_conversion : 1; // bit 24 (v6.3.0.2) - SetOption24 - (Pressure) switch between hPa (0)or mmHg (1) unit
|
||||
uint32_t knx_enabled : 1; // bit 25 (v5.12.0l) - CMND_KNX_ENABLED
|
||||
uint32_t device_index_enable : 1; // bit 26 (v5.13.1a) - SetOption26 - (MQTT, HAss) Switch between POWER (0) or POWER1 (1)
|
||||
uint32_t knx_enable_enhancement : 1; // bit 27 (v5.14.0a) - CMND_KNX_ENHANCED
|
||||
uint32_t pressure_conversion : 1; // bit 24 (v6.3.0.2) - SetOption24 - PRESSURE_CONVERSION - (Pressure) switch between hPa (0)or mmHg (1) unit
|
||||
uint32_t knx_enabled : 1; // bit 25 (v5.12.0l) - CMND_KNX_ENABLED - KNX_ENABLED
|
||||
uint32_t device_index_enable : 1; // bit 26 (v5.13.1a) - SetOption26 - MQTT_POWER_FORMAT - (MQTT, HAss) Switch between POWER (0) or POWER1 (1)
|
||||
uint32_t knx_enable_enhancement : 1; // bit 27 (v5.14.0a) - CMND_KNX_ENHANCED - KNX_ENHANCED
|
||||
uint32_t rf_receive_decimal : 1; // bit 28 (v6.0.0a) - SetOption28 - (RF) Receive data format hexadecimal (0) or decimal (1)
|
||||
uint32_t ir_receive_decimal : 1; // bit 29 (v6.0.0a) - SetOption29 - (IR) Receive data format hexadecimal (0) or decimal (1)
|
||||
uint32_t hass_light : 1; // bit 30 (v6.0.0b) - SetOption30 - (HAss) enforce autodiscovery as light (1)
|
||||
uint32_t global_state : 1; // bit 31 (v6.1.0) - SetOption31 - (Wifi, MQTT) Control link led blinking (1)
|
||||
uint32_t ir_receive_decimal : 1; // bit 29 (v6.0.0a) - SetOption29 - IR_DATA_RADIX - (IR) Receive data format hexadecimal (0) or decimal (1)
|
||||
uint32_t hass_light : 1; // bit 30 (v6.0.0b) - SetOption30 - HASS_AS_LIGHT - (HAss) enforce autodiscovery as light (1)
|
||||
uint32_t global_state : 1; // bit 31 (v6.1.0) - SetOption31 - APP_ENABLE_LEDLINK - (Wifi, MQTT) Control link led blinking (1)
|
||||
};
|
||||
} SOBitfield;
|
||||
|
||||
|
|
@ -63,39 +63,39 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
|||
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
|
||||
uint32_t data; // Allow bit manipulation using SetOption
|
||||
struct { // SetOption50 .. SetOption81
|
||||
uint32_t timers_enable : 1; // bit 0 (v6.1.1b) - CMND_TIMERS
|
||||
uint32_t timers_enable : 1; // bit 0 (v6.1.1b) - CMND_TIMERS - TIMERS_ENABLED
|
||||
uint32_t user_esp8285_enable : 1; // bit 1 (v6.1.1.14) - SetOption51 - (GPIO) Enable ESP8285 user GPIO's (1)
|
||||
uint32_t time_append_timezone : 1; // bit 2 (v6.2.1.2) - SetOption52 - (Time) Append timezone to JSON time (1)
|
||||
uint32_t gui_hostname_ip : 1; // bit 3 (v6.2.1.20) - SetOption53 - (GUI) Show hostname and IP address in GUI main menu (1)
|
||||
uint32_t tuya_apply_o20 : 1; // bit 4 (v6.3.0.4) - SetOption54 - (Tuya) Apply SetOption20 settings to Tuya device (1)
|
||||
uint32_t mdns_enabled : 1; // bit 5 (v6.4.1.4) - SetOption55 - (mDNS) Service on (1) or off (0)
|
||||
uint32_t use_wifi_scan : 1; // bit 6 (v6.3.0.10) - SetOption56 - (Wifi) Scan network at restart for configured AP's (1) or used stored AP (0)
|
||||
uint32_t use_wifi_rescan : 1; // bit 7 (v6.3.0.10) - SetOption57 - (Wifi) Scan network every 44 minutes for configured AP's (1)
|
||||
uint32_t receive_raw : 1; // bit 8 (v6.3.0.11) - SetOption58 - (IR) Add IR Raw data to JSON message (1)
|
||||
uint32_t hass_tele_on_power : 1; // bit 9 (v6.3.0.13) - SetOption59 - (MQTT) Send tele/%topic%/STATE in addition to stat/%topic%/RESULT (1)
|
||||
uint32_t sleep_normal : 1; // bit 10 (v6.3.0.15) - SetOption60 - (Sleep) Enable normal sleep (1) instead of dynamic sleep (0)
|
||||
uint32_t button_switch_force_local : 1;// bit 11 (v6.3.0.16) - SetOption61 - (Button, Switch) Force local operation (1) when button/switch topic is set
|
||||
uint32_t no_hold_retain : 1; // bit 12 (v6.4.1.19) - SetOption62 - (MQTT) Don't use retain flag on HOLD messages (1)
|
||||
uint32_t no_power_feedback : 1; // bit 13 (v6.5.0.9) - SetOption63 - (Power) Don't scan relay power state at restart (1)
|
||||
uint32_t use_underscore : 1; // bit 14 (v6.5.0.12) - SetOption64 - (JSON) Enable "_" (1) instead of "-" (0) as sensor index separator
|
||||
uint32_t fast_power_cycle_disable : 1; // bit 15 (v6.6.0.20) - SetOption65 - (QPC) Disable (1) fast power cycle detection for device reset
|
||||
uint32_t tuya_serial_mqtt_publish : 1; // bit 16 (v6.6.0.21) - SetOption66 - (Tuya) Enable (1) TuyaMcuReceived messages over Mqtt
|
||||
uint32_t buzzer_enable : 1; // bit 17 (v6.6.0.1) - SetOption67 - (Buzzer) Enable (1) buzzer when available
|
||||
uint32_t pwm_multi_channels : 1; // bit 18 (v6.6.0.3) - SetOption68 - (Light) Enable multi-channels PWM (1) instead of Color PWM (0)
|
||||
uint32_t time_append_timezone : 1; // bit 2 (v6.2.1.2) - SetOption52 - MQTT_APPEND_TIMEZONE - (Time) Append timezone to JSON time (1)
|
||||
uint32_t gui_hostname_ip : 1; // bit 3 (v6.2.1.20) - SetOption53 - GUI_SHOW_HOSTNAME - (GUI) Show hostname and IP address in GUI main menu (1)
|
||||
uint32_t tuya_apply_o20 : 1; // bit 4 (v6.3.0.4) - SetOption54 - TUYA_SETOPTION_20 - (Tuya) Apply SetOption20 settings to Tuya device (1)
|
||||
uint32_t mdns_enabled : 1; // bit 5 (v6.4.1.4) - SetOption55 - MDNS_ENABLED - (mDNS) Service on (1) or off (0)
|
||||
uint32_t use_wifi_scan : 1; // bit 6 (v6.3.0.10) - SetOption56 - WIFI_SCAN_AT_RESTART - (Wifi) Scan network at restart for configured AP's (1) or used stored AP (0)
|
||||
uint32_t use_wifi_rescan : 1; // bit 7 (v6.3.0.10) - SetOption57 - WIFI_SCAN_REGULARLY - (Wifi) Scan network every 44 minutes for configured AP's (1)
|
||||
uint32_t receive_raw : 1; // bit 8 (v6.3.0.11) - SetOption58 - IR_ADD_RAW_DATA - (IR) Add IR Raw data to JSON message (1)
|
||||
uint32_t hass_tele_on_power : 1; // bit 9 (v6.3.0.13) - SetOption59 - TELE_ON_POWER - (MQTT) Send tele/%topic%/STATE in addition to stat/%topic%/RESULT (1)
|
||||
uint32_t sleep_normal : 1; // bit 10 (v6.3.0.15) - SetOption60 - APP_NORMAL_SLEEP - (Sleep) Enable normal sleep (1) instead of dynamic sleep (0)
|
||||
uint32_t button_switch_force_local : 1;// bit 11 (v6.3.0.16) - SetOption61 - MQTT_BUTTON_SWITCH_FORCE_LOCAL - (Button, Switch) Force local operation (1) when button/switch topic is set
|
||||
uint32_t no_hold_retain : 1; // bit 12 (v6.4.1.19) - SetOption62 - MQTT_NO_HOLD_RETAIN - (MQTT) Don't use retain flag on HOLD messages (1)
|
||||
uint32_t no_power_feedback : 1; // bit 13 (v6.5.0.9) - SetOption63 - APP_NO_RELAY_SCAN - (Power) Don't scan relay power state at restart (1)
|
||||
uint32_t use_underscore : 1; // bit 14 (v6.5.0.12) - SetOption64 - MQTT_INDEX_SEPARATOR - (JSON) Enable "_" (1) instead of "-" (0) as sensor index separator
|
||||
uint32_t fast_power_cycle_disable : 1; // bit 15 (v6.6.0.20) - SetOption65 - APP_DISABLE_POWERCYCLE - (QPC) Disable (1) fast power cycle detection for device reset
|
||||
uint32_t tuya_serial_mqtt_publish : 1; // bit 16 (v6.6.0.21) - SetOption66 - MQTT_TUYA_RECEIVED - (Tuya) Enable (1) TuyaMcuReceived messages over Mqtt
|
||||
uint32_t buzzer_enable : 1; // bit 17 (v6.6.0.1) - SetOption67 - BUZZER_ENABLE - (Buzzer) Enable (1) buzzer when available
|
||||
uint32_t pwm_multi_channels : 1; // bit 18 (v6.6.0.3) - SetOption68 - LIGHT_CHANNEL_MODE - (Light) Enable multi-channels PWM (1) instead of Color PWM (0)
|
||||
// uint32_t ex_tuya_dimmer_min_limit : 1; // bit 19 (v6.6.0.5) - SetOption69 - (not used) Limits Tuya dimmers to minimum of 10% (25) when enabled
|
||||
uint32_t sb_receive_invert : 1; // bit 19 (v14.2.0.3) - SetOption69 - (Serial) Invert Serial receive on SerialBridge (1)
|
||||
uint32_t energy_weekend : 1; // bit 20 (v6.6.0.8) - CMND_TARIFF
|
||||
uint32_t dds2382_model : 1; // bit 21 (v6.6.0.14) - SetOption71 - (DDS2382) Select different Modbus registers (1) for Active Energy (#6531)
|
||||
uint32_t hardware_energy_total : 1; // bit 22 (v6.6.0.15) - SetOption72 - (Energy) Enable (1) hardware energy total counter as reference (#6561)
|
||||
uint32_t mqtt_buttons : 1; // bit 23 (v8.2.0.3) - SetOption73 - (Button) Detach buttons from relays (1) and enable MQTT action state for multipress
|
||||
uint32_t ds18x20_internal_pullup : 1; // bit 24 (v7.0.0.1) - SetOption74 - (DS18x20) Enable internal pullup (1) for single DS18x20 sensor
|
||||
uint32_t grouptopic_mode : 1; // bit 25 (v7.0.0.1) - SetOption75 - (MQTT) GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1)
|
||||
uint32_t bootcount_update : 1; // bit 26 (v7.0.0.4) - SetOption76 - (Deepsleep) Enable incrementing bootcount (1) when deepsleep is enabled
|
||||
uint32_t slider_dimmer_stay_on : 1; // bit 27 (v7.0.0.6) - SetOption77 - (Light) Do not power off (1) if slider moved to far left
|
||||
uint32_t dds2382_model : 1; // bit 21 (v6.6.0.14) - SetOption71 - ENERGY_DDS2382_MODE - (DDS2382) Select different Modbus registers (1) for Active Energy (#6531)
|
||||
uint32_t hardware_energy_total : 1; // bit 22 (v6.6.0.15) - SetOption72 - ENERGY_HARDWARE_TOTALS - (Energy) Enable (1) hardware energy total counter as reference (#6561)
|
||||
uint32_t mqtt_buttons : 1; // bit 23 (v8.2.0.3) - SetOption73 - MQTT_BUTTONS - (Button) Detach buttons from relays (1) and enable MQTT action state for multipress
|
||||
uint32_t ds18x20_internal_pullup : 1; // bit 24 (v7.0.0.1) - SetOption74 - DS18X20_PULL_UP - (DS18x20) Enable internal pullup (1) for single DS18x20 sensor
|
||||
uint32_t grouptopic_mode : 1; // bit 25 (v7.0.0.1) - SetOption75 - MQTT_GROUPTOPIC_FORMAT - (MQTT) GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1)
|
||||
uint32_t bootcount_update : 1; // bit 26 (v7.0.0.4) - SetOption76 - DEEPSLEEP_BOOTCOUNT - (Deepsleep) Enable incrementing bootcount (1) when deepsleep is enabled
|
||||
uint32_t slider_dimmer_stay_on : 1; // bit 27 (v7.0.0.6) - SetOption77 - LIGHT_SLIDER_POWER - (Light) Do not power off (1) if slider moved to far left
|
||||
uint32_t ex_compatibility_check : 1; // bit 28 (v7.1.2.6) - SetOption78 - (not used) Disable OTA compatibility check
|
||||
uint32_t counter_reset_on_tele : 1; // bit 29 (v8.1.0.1) - SetOption79 - (Counter) Enable resetting of counters (1) after telemetry was sent
|
||||
uint32_t shutter_mode : 1; // bit 30 (v6.6.0.14) - SetOption80 - (Shutter) Enable shutter support (1)
|
||||
uint32_t pcf8574_ports_inverted : 1; // bit 31 (v6.6.0.14) - SetOption81 - (PCF8574) Invert all ports on PCF8574 devices (1)
|
||||
uint32_t counter_reset_on_tele : 1; // bit 29 (v8.1.0.1) - SetOption79 - COUNTER_RESET - (Counter) Enable resetting of counters (1) after telemetry was sent
|
||||
uint32_t shutter_mode : 1; // bit 30 (v6.6.0.14) - SetOption80 - SHUTTER_SUPPORT - (Shutter) Enable shutter support (1)
|
||||
uint32_t pcf8574_ports_inverted : 1; // bit 31 (v6.6.0.14) - SetOption81 - PCF8574_INVERT_PORTS - (PCF8574) Invert all ports on PCF8574 devices (1)
|
||||
};
|
||||
} SOBitfield3;
|
||||
|
||||
|
|
@ -103,37 +103,37 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
|||
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
|
||||
uint32_t data; // Allow bit manipulation using SetOption
|
||||
struct { // SetOption82 .. SetOption113
|
||||
uint32_t alexa_ct_range : 1; // bit 0 (v8.1.0.2) - SetOption82 - (Alexa) Reduced CT range for Alexa (1)
|
||||
uint32_t zigbee_use_names : 1; // bit 1 (v8.1.0.4) - SetOption83 - (Zigbee) Use FriendlyNames (1) instead of ShortAddresses (0) when possible
|
||||
uint32_t alexa_ct_range : 1; // bit 0 (v8.1.0.2) - SetOption82 - LIGHT_ALEXA_CT_RANGE - (Alexa) Reduced CT range for Alexa (1)
|
||||
uint32_t zigbee_use_names : 1; // bit 1 (v8.1.0.4) - SetOption83 - ZIGBEE_FRIENDLY_NAMES - (Zigbee) Use FriendlyNames (1) instead of ShortAddresses (0) when possible
|
||||
uint32_t awsiot_shadow : 1; // bit 2 (v8.1.0.5) - SetOption84 - (AWS IoT) publish MQTT state to a device shadow (1)
|
||||
uint32_t device_groups_enabled : 1; // bit 3 (v8.1.0.9) - SetOption85 - (DevGroups) Enable Device Groups (1)
|
||||
uint32_t led_timeout : 1; // bit 4 (v8.1.0.9) - SetOption86 - (PWM Dimmer) Turn brightness LED's off (1) 5 seconds after last change
|
||||
uint32_t powered_off_led : 1; // bit 5 (v8.1.0.9) - SetOption87 - (PWM Dimmer) Turn red LED on (1) when powered off
|
||||
uint32_t multiple_device_groups : 1; // bit 6 (v8.1.0.9) - SetOption88 - (DevGroups) Enable relays in separate device groups/PWM Dimmer Buttons control remote devices (1)
|
||||
uint32_t zigbee_distinct_topics : 1; // bit 7 (v8.1.0.10) - SetOption89 - (MQTT, Zigbee) Distinct MQTT topics per device for Zigbee (1) (#7835)
|
||||
uint32_t only_json_message : 1; // bit 8 (v8.2.0.3) - SetOption90 - (MQTT) Disable non-json MQTT response (1)
|
||||
uint32_t zigbee_distinct_topics : 1; // bit 7 (v8.1.0.10) - SetOption89 - ZIGBEE_DISTINCT_TOPICS - (MQTT, Zigbee) Distinct MQTT topics per device for Zigbee (1) (#7835)
|
||||
uint32_t only_json_message : 1; // bit 8 (v8.2.0.3) - SetOption90 - MQTT_ONLY_JSON_OUTPUT - (MQTT) Disable non-json MQTT response (1)
|
||||
uint32_t fade_at_startup : 1; // bit 9 (v8.2.0.3) - SetOption91 - (Light) Enable light fading at start/power on (1)
|
||||
uint32_t pwm_ct_mode : 1; // bit 10 (v8.2.0.4) - SetOption92 - (Light) Set PWM Mode from regular PWM (0) to ColorTemp (1) control (Xiaomi Philips ...)
|
||||
uint32_t pwm_ct_mode : 1; // bit 10 (v8.2.0.4) - SetOption92 - LIGHT_PWM_CT_MODE - (Light) Set PWM Mode from regular PWM (0) to ColorTemp (1) control (Xiaomi Philips ...)
|
||||
uint32_t compress_rules_cpu : 1; // bit 11 (v8.2.0.6) - SetOption93 - (Compress) Keep uncompressed rules in memory to avoid CPU load of uncompressing at each tick (1)
|
||||
uint32_t max6675 : 1; // bit 12 (v8.3.1.2) - SetOption94 - (MAXxxx) Implement simpler MAX6675 protocol (1) instead of MAX31855 (0)
|
||||
uint32_t network_wifi : 1; // bit 13 (v8.3.1.3) - CMND_WIFI
|
||||
uint32_t network_ethernet : 1; // bit 14 (v8.3.1.3) - CMND_ETHERNET
|
||||
uint32_t network_wifi : 1; // bit 13 (v8.3.1.3) - CMND_WIFI - 1
|
||||
uint32_t network_ethernet : 1; // bit 14 (v8.3.1.3) - CMND_ETHERNET - 1
|
||||
uint32_t tuyamcu_baudrate : 1; // bit 15 (v8.3.1.6) - SetOption97 - (Tuya) Set Baud rate for TuyaMCU serial communication to 9600 (0) or 115200 (1)
|
||||
uint32_t rotary_uses_rules : 1; // bit 16 (v8.3.1.6) - SetOption98 - (Rotary) Use rules (1) instead of light control (0)
|
||||
uint32_t zerocross_dimmer : 1; // bit 17 (v8.3.1.4) - SetOption99 - (PWM Dimmer) Enable zerocross dimmer (1)
|
||||
uint32_t remove_zbreceived : 1; // bit 18 (v8.3.1.7) - SetOption100 - (Zigbee) Remove ZbReceived form JSON message (1)
|
||||
uint32_t zb_index_ep : 1; // bit 19 (v8.3.1.7) - SetOption101 - (Zigbee) Add the source endpoint as suffix to attributes, ex `Power3` (1) instead of `Power` (0) if sent from endpoint 3
|
||||
uint32_t remove_zbreceived : 1; // bit 18 (v8.3.1.7) - SetOption100 - ZIGBEE_RMV_ZBRECEIVED - (Zigbee) Remove ZbReceived form JSON message (1)
|
||||
uint32_t zb_index_ep : 1; // bit 19 (v8.3.1.7) - SetOption101 - ZIGBEE_INDEX_EP - (Zigbee) Add the source endpoint as suffix to attributes, ex `Power3` (1) instead of `Power` (0) if sent from endpoint 3
|
||||
uint32_t obsolete1 : 1; // bit 20 (v9.3.1.3) - SetOption102 - teleinfo_baudrate Obsolete Teleinfo config has now a dedicated bit field
|
||||
uint32_t mqtt_tls : 1; // bit 21 (v8.4.0.1) - SetOption103 - (MQTT TLS) Enable TLS mode (1) (requires TLS version)
|
||||
uint32_t mqtt_no_retain : 1; // bit 22 (v8.4.0.1) - SetOption104 - (MQTT) No Retain (1) - disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant
|
||||
uint32_t white_blend_mode : 1; // bit 23 (v8.4.0.1) - SetOption105 - (Light) White Blend Mode (1) - used to be `RGBWWTable` last value `0`, now deprecated in favor of this option
|
||||
uint32_t virtual_ct : 1; // bit 24 (v8.4.0.1) - SetOption106 - (Light) Virtual CT (1) - Creates a virtual White ColorTemp for RGBW lights
|
||||
uint32_t virtual_ct_cw : 1; // bit 25 (v8.4.0.1) - SetOption107 - (Light) Virtual CT Channel (1) - signals whether the hardware white is cold CW (true) or warm WW (false)
|
||||
uint32_t mqtt_tls : 1; // bit 21 (v8.4.0.1) - SetOption103 - MQTT_TLS_ENABLED - (MQTT TLS) Enable TLS mode (1) (requires TLS version)
|
||||
uint32_t mqtt_no_retain : 1; // bit 22 (v8.4.0.1) - SetOption104 - MQTT_NO_RETAIN - (MQTT) No Retain (1) - disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant
|
||||
uint32_t white_blend_mode : 1; // bit 23 (v8.4.0.1) - SetOption105 - LIGHT_WHITE_BLEND_MODE - (Light) White Blend Mode (1) - used to be `RGBWWTable` last value `0`, now deprecated in favor of this option
|
||||
uint32_t virtual_ct : 1; // bit 24 (v8.4.0.1) - SetOption106 - LIGHT_VIRTUAL_CT - (Light) Virtual CT (1) - Creates a virtual White ColorTemp for RGBW lights
|
||||
uint32_t virtual_ct_cw : 1; // bit 25 (v8.4.0.1) - SetOption107 - LIGHT_VIRTUAL_CT_CW - (Light) Virtual CT Channel (1) - signals whether the hardware white is cold CW (true) or warm WW (false)
|
||||
uint32_t obsolete2 : 1; // bit 26 (v9.3.1.3) - SetOption108 - teleinfo_rawdata Obsolete Teleinfo config has now a dedicated bit field
|
||||
uint32_t alexa_gen_1 : 1; // bit 27 (v8.4.0.3) - SetOption109 - (Alexa) Gen1 mode (1) - if you only have Echo Dot 2nd gen devices
|
||||
uint32_t alexa_gen_1 : 1; // bit 27 (v8.4.0.3) - SetOption109 - EMULATION_HUE_1ST_GEN - (Alexa) Gen1 mode (1) - if you only have Echo Dot 2nd gen devices
|
||||
uint32_t zb_disable_autobind : 1; // bit 28 (v8.5.0.1) - SetOption110 - (Zigbee) Disable auto-config (1) when pairing new devices
|
||||
uint32_t buzzer_freq_mode : 1; // bit 29 (v8.5.0.1) - SetOption111 - (Buzzer) Use frequency output (1) for buzzer pin instead of on/off signal (0)
|
||||
uint32_t zb_topic_fname : 1; // bit 30 (v8.5.0.1) - SetOption112 - (Zigbee) Use friendly name in zigbee topic (1) (use with SetOption89)
|
||||
uint32_t zb_topic_fname : 1; // bit 30 (v8.5.0.1) - SetOption112 - ZIGBEE_TOPIC_FNAME - (Zigbee) Use friendly name in zigbee topic (1) (use with SetOption89)
|
||||
uint32_t rotary_poweron_dimlow : 1; // bit 31 (v9.0.0.2) - SetOption113 - (Rotary) Set dimmer low on rotary dial after power off (1)
|
||||
};
|
||||
} SOBitfield4;
|
||||
|
|
@ -142,38 +142,38 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
|||
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
|
||||
uint32_t data; // Allow bit manipulation using SetOption
|
||||
struct { // SetOption114 .. SetOption145
|
||||
uint32_t mqtt_switches : 1; // bit 0 (v9.0.0.3) - SetOption114 - (Switch) Detach Switches from relays and enable MQTT action state for all the SwitchModes (1)
|
||||
uint32_t mi32_enable : 1; // bit 1 (v9.1.0.1) - SetOption115 - (ESP32 BLE) Enable ESP32 MI32 BLE (1)
|
||||
uint32_t mqtt_switches : 1; // bit 0 (v9.0.0.3) - SetOption114 - MQTT_SWITCHES - (Switch) Detach Switches from relays and enable MQTT action state for all the SwitchModes (1)
|
||||
uint32_t mi32_enable : 1; // bit 1 (v9.1.0.1) - SetOption115 - BLE_ESP32_ENABLE - (ESP32 BLE) Enable ESP32 MI32 BLE (1)
|
||||
uint32_t zb_disable_autoquery : 1; // bit 2 (v9.1.0.1) - SetOption116 - (Zigbee) Disable auto-query of zigbee lights and devices (1)
|
||||
uint32_t fade_fixed_duration : 1; // bit 3 (v9.1.0.2) - SetOption117 - (Light) run fading at fixed duration instead of fixed slew rate
|
||||
uint32_t zb_received_as_subtopic : 1; // bit 4 (v9.2.0.3) - SetOption118 - (Zigbee) Move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default
|
||||
uint32_t zb_omit_json_addr : 1; // bit 5 (v9.2.0.3) - SetOption119 - (Zigbee) Remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic
|
||||
uint32_t zb_topic_endpoint : 1; // bit 6 (v9.2.0.4) - SetOption120 - (Zigbee) Append endpoint number to topic if device dependent (use with SetOption89)
|
||||
uint32_t mqtt_state_retain : 1; // bit 7 (v9.3.0.1) - CMND_STATERETAIN
|
||||
uint32_t mqtt_info_retain : 1; // bit 8 (v9.3.0.1) - CMND_INFORETAIN
|
||||
uint32_t mqtt_state_retain : 1; // bit 7 (v9.3.0.1) - CMND_STATERETAIN - MQTT_STATE_RETAIN
|
||||
uint32_t mqtt_info_retain : 1; // bit 8 (v9.3.0.1) - CMND_INFORETAIN - MQTT_INFO_RETAIN
|
||||
uint32_t wiegand_hex_output : 1; // bit 9 (v9.3.1.1) - SetOption123 - (Wiegand) switch tag number output to hex format (1)
|
||||
uint32_t wiegand_keypad_to_tag : 1; // bit 10 (v9.3.1.1) - SetOption124 - (Wiegand) send key pad stroke as single char (0) or one tag (ending char #) (1)
|
||||
uint32_t zigbee_hide_bridge_topic : 1; // bit 11 (v9.3.1.1) - SetOption125 - (Zigbee) Hide bridge topic from zigbee topic (use with SetOption89) (1)
|
||||
uint32_t ds18x20_mean : 1; // bit 12 (v9.3.1.2) - SetOption126 - (DS18x20) Enable arithmetic mean over teleperiod for JSON temperature (1)
|
||||
uint32_t wifi_no_sleep : 1; // bit 13 (v9.5.0.2) - SetOption127 - (Wifi) Keep wifi in no-sleep mode, prevents some occasional unresponsiveness
|
||||
uint32_t disable_referer_chk : 1; // bit 14 (v9.5.0.5) - SetOption128 - (Web) Allow access without referer check
|
||||
uint32_t wifi_no_sleep : 1; // bit 13 (v9.5.0.2) - SetOption127 - WIFI_NO_SLEEP - (Wifi) Keep wifi in no-sleep mode, prevents some occasional unresponsiveness
|
||||
uint32_t disable_referer_chk : 1; // bit 14 (v9.5.0.5) - SetOption128 - DISABLE_REFERER_CHK - (Web) Allow access without referer check
|
||||
uint32_t energy_phase : 1; // bit 15 (v9.5.0.9) - SetOption129 - (Energy) Show phase information
|
||||
uint32_t show_heap_with_timestamp : 1; // bit 16 (v9.5.0.9) - SetOption130 - (Debug) Show heap with logging timestamp
|
||||
uint32_t tuya_allow_dimmer_0 : 1; // bit 17 (v10.0.0.3) - SetOption131 - (Tuya) Allow save dimmer = 0 receved by MCU
|
||||
uint32_t tls_use_fingerprint : 1; // bit 18 (v10.0.0.4) - SetOption132 - (TLS) Use fingerprint validation instead of CA based
|
||||
uint32_t shift595_invert_outputs : 1; // bit 19 (v10.0.0.4) - SetOption133 - (Shift595) Invert outputs of 74x595 shift registers
|
||||
uint32_t tuya_allow_dimmer_0 : 1; // bit 17 (v10.0.0.3) - SetOption131 - TUYA_ALLOW_DIMMER_0 - (Tuya) Allow save dimmer = 0 receved by MCU
|
||||
uint32_t tls_use_fingerprint : 1; // bit 18 (v10.0.0.4) - SetOption132 - MQTT_TLS_FINGERPRINT - (TLS) Use fingerprint validation instead of CA based
|
||||
uint32_t shift595_invert_outputs : 1; // bit 19 (v10.0.0.4) - SetOption133 - SHIFT595_INVERT_OUTPUTS - (Shift595) Invert outputs of 74x595 shift registers
|
||||
uint32_t pwm_force_same_phase : 1; // bit 20 (v10.1.0.6) - SetOption134 - (PWM) force PWM lights to start at same phase, default is to spread phases to minimze overlap (also needed for H-bridge)
|
||||
uint32_t display_no_splash : 1; // bit 21 (v11.0.0.2) - SetOption135 - (Display & LVGL) force disabling default splash screen
|
||||
uint32_t tuyasns_no_immediate : 1; // bit 22 (v11.0.0.4) - SetOption136 - (TuyaSNS) When ON disable publish single SNS value on Tuya Receive (keep Teleperiod)
|
||||
uint32_t tuya_exclude_from_mqtt : 1; // bit 23 (v11.0.0.5) - SetOption137 - (Tuya) When Set, avoid the (MQTT-) publish of defined Tuya CMDs (see xdrv_16_tuyamcu.ino) if SetOption66 is active
|
||||
uint32_t tuya_exclude_from_mqtt : 1; // bit 23 (v11.0.0.5) - SetOption137 - TUYA_SETOPTION_137 - (Tuya) When Set, avoid the (MQTT-) publish of defined Tuya CMDs (see xdrv_16_tuyamcu.ino) if SetOption66 is active
|
||||
uint32_t gui_table_align : 1; // bit 24 (v11.0.0.7) - SetOption138 - (GUI) Align (energy) table values left (0) or right (1)
|
||||
uint32_t mm_vs_inch : 1; // bit 25 (v11.1.0.1) - SetOption139 - (Pressure) Switch between mmHg (0) or inHg (1) when SO24 1
|
||||
uint32_t mqtt_persistent : 1; // bit 26 (v11.1.0.1) - SetOption140 - (MQTT) MQTT clean session (0 = default) or persistent session (1)
|
||||
uint32_t gui_module_name : 1; // bit 27 (v11.1.0.3) - SetOption141 - (GUI) Disable display of GUI module name (1)
|
||||
uint32_t mqtt_persistent : 1; // bit 26 (v11.1.0.1) - SetOption140 - MQTT_CLEAN_SESSION - (MQTT) MQTT clean session (0 = default) or persistent session (1)
|
||||
uint32_t gui_module_name : 1; // bit 27 (v11.1.0.3) - SetOption141 - GUI_NOSHOW_MODULE - (GUI) Disable display of GUI module name (1)
|
||||
uint32_t wait_for_wifi_result : 1; // bit 28 (v11.1.0.4) - SetOption142 - (Wifi) Wait 1 second for wifi connection solving some FRITZ!Box modem issues (1)
|
||||
uint32_t zigbee_no_batt_autoprobe : 1; // bit 29 (v12.0.2.4) - SetOption143 - (Zigbee) Disable Battery auto-probe and using auto-binding
|
||||
uint32_t zigbee_include_time : 1; // bit 30 (v12.0.2.4) - SetOption144 - (Zigbee) Include time in `ZbReceived` messages like other sensors
|
||||
uint32_t mqtt_status_retain : 1; // bit 31 (v12.1.0.1) - CMND_STATUSRETAIN
|
||||
uint32_t mqtt_status_retain : 1; // bit 31 (v12.1.0.1) - CMND_STATUSRETAIN - MQTT_STATUS_RETAIN
|
||||
};
|
||||
} SOBitfield5;
|
||||
|
||||
|
|
@ -181,23 +181,23 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
|||
uint32_t data; // Allow bit manipulation using SetOption
|
||||
struct { // SetOption146 .. SetOption177
|
||||
uint32_t use_esp32_temperature : 1; // bit 0 (v12.1.1.1) - SetOption146 - (ESP32) Show ESP32 internal temperature sensor
|
||||
uint32_t mqtt_disable_publish : 1; // bit 1 (v12.1.1.2) - SetOption147 - (MQTT) Disable publish SSerialReceived/IRReceived MQTT messages, you must use event trigger rules instead.
|
||||
uint32_t mqtt_disable_publish : 1; // bit 1 (v12.1.1.2) - SetOption147 - MQTT_DISABLE_SSERIALRECEIVED - (MQTT) Disable publish SSerialReceived/IRReceived MQTT messages, you must use event trigger rules instead.
|
||||
uint32_t artnet_autorun : 1; // bit 2 (v12.2.0.4) - SetOption148 - (Light) start DMX ArtNet at boot, listen to UDP port as soon as network is up
|
||||
uint32_t dns_ipv6_priority : 1; // bit 3 (v12.2.0.6) - SetOption149 - (Wifi) prefer IPv6 DNS resolution to IPv4 address when available. Requires `#define USE_IPV6`
|
||||
uint32_t no_voltage_common : 1; // bit 4 (v12.3.1.5) - SetOption150 - (Energy) Force no voltage/frequency common
|
||||
uint32_t matter_enabled : 1; // bit 5 (v12.3.1.5) - SetOption151 - (Matter) Enable Matter protocol over Wifi
|
||||
uint32_t matter_enabled : 1; // bit 5 (v12.3.1.5) - SetOption151 - MATTER_ENABLED - (Matter) Enable Matter protocol over Wifi
|
||||
uint32_t bistable_single_pin : 1; // bit 6 (v12.5.0.1) - SetOption152 - (Power) Switch between two (0) or one (1) pin bistable relay control
|
||||
uint32_t berry_no_autoexec : 1; // bit 7 (v12.5.0.3) - SetOption153 - (Berry) Disable autoexec.be on restart (1)
|
||||
uint32_t berry_light_scheme : 1; // bit 8 (v12.5.0.3) - SetOption154 - (Berry) Handle berry led using RMT0 as additional WS2812 scheme
|
||||
uint32_t zcfallingedge : 1; // bit 9 (v13.0.0.1) - SetOption155 - (ZCDimmer) Enable rare falling Edge dimmer instead of leading edge
|
||||
uint32_t sen5x_passive_mode : 1; // bit 10 (v13.1.0.1) - SetOption156 - (Sen5x) Run in passive mode when there is another I2C master (e.g. Ikea Vindstyrka), i.e. do not set up Sen5x sensor, higher polling interval
|
||||
uint32_t neopool_outputsensitive : 1; // bit 11 (v13.2.0.1) - SetOption157 - (NeoPool) Output sensitive data (1)
|
||||
uint32_t mqtt_disable_modbus : 1; // bit 12 (v13.3.0.5) - SetOption158 - (MQTT) Disable publish ModbusReceived MQTT messages (1), you must use event trigger rules instead
|
||||
uint32_t mqtt_disable_modbus : 1; // bit 12 (v13.3.0.5) - SetOption158 - MQTT_DISABLE_MODBUSRECEIVED - (MQTT) Disable publish ModbusReceived MQTT messages (1), you must use event trigger rules instead
|
||||
uint32_t counter_both_edges : 1; // bit 13 (v13.3.0.5) - SetOption159 - (Counter) Enable counting on both rising and falling edge (1)
|
||||
uint32_t ld2410_use_pin : 1; // bit 14 (v14.3.0.2) - SetOption160 - (LD2410) Disable generate moving event by sensor report - use LD2410 out pin for events (1)
|
||||
uint32_t gui_no_state_text : 1; // bit 15 (v14.3.0.7) - SetOption161 - (GUI) Disable display of state text (1)
|
||||
uint32_t gui_no_state_text : 1; // bit 15 (v14.3.0.7) - SetOption161 - GUI_NOSHOW_STATETEXT - (GUI) Disable display of state text (1)
|
||||
uint32_t no_export_energy_today : 1; // bit 16 (v14.3.0.7) - SetOption162 - (Energy) Do not add export energy to energy today (1)
|
||||
uint32_t gui_device_name : 1; // bit 17 (v14.4.1.1) - SetOption163 - (GUI) Disable display of GUI device name (1)
|
||||
uint32_t gui_device_name : 1; // bit 17 (v14.4.1.1) - SetOption163 - GUI_NOSHOW_DEVICENAME - (GUI) Disable display of GUI device name (1)
|
||||
uint32_t spare18 : 1; // bit 18
|
||||
uint32_t spare19 : 1; // bit 19
|
||||
uint32_t spare20 : 1; // bit 20
|
||||
|
|
@ -222,18 +222,18 @@ typedef union {
|
|||
uint32_t spare00 : 1;
|
||||
uint32_t speed_conversion : 3; // (v8.1.0.10) - Tx2x sensor
|
||||
uint32_t time_format : 2; // (v6.6.0.9) - CMND_TIME
|
||||
uint32_t calc_resolution : 3;
|
||||
uint32_t calc_resolution : 3; // CALC_RESOLUTION
|
||||
uint32_t weight_resolution : 2;
|
||||
uint32_t frequency_resolution : 2;
|
||||
uint32_t axis_resolution : 2;
|
||||
uint32_t current_resolution : 2;
|
||||
uint32_t current_resolution : 2; // 2
|
||||
uint32_t voltage_resolution : 2;
|
||||
uint32_t wattage_resolution : 2;
|
||||
uint32_t emulation : 2;
|
||||
uint32_t energy_resolution : 3;
|
||||
uint32_t pressure_resolution : 2;
|
||||
uint32_t humidity_resolution : 2;
|
||||
uint32_t temperature_resolution : 2;
|
||||
uint32_t emulation : 2; // EMULATION
|
||||
uint32_t energy_resolution : 3; // ENERGY_RESOLUTION
|
||||
uint32_t pressure_resolution : 2; // PRESSURE_RESOLUTION
|
||||
uint32_t humidity_resolution : 2; // HUMIDITY_RESOLUTION
|
||||
uint32_t temperature_resolution : 2; // TEMP_RESOLUTION
|
||||
};
|
||||
} SysMBitfield1;
|
||||
|
||||
|
|
@ -264,7 +264,7 @@ typedef union {
|
|||
uint32_t FTP_Mode : 2; // bit 24/25
|
||||
uint32_t tariff_forced : 2; // bit 26/27 (v12.4.0.2) - Energy forced tariff : 0=tariff change on time, 1|2=tariff forced
|
||||
uint32_t sunrise_dawn_angle : 2; // bit 28/29 (v12.1.1.4) -
|
||||
uint32_t temperature_set_res : 2; // bit 30/31 (v9.3.1.4) - (Tuya)
|
||||
uint32_t temperature_set_res : 2; // bit 30/31 (v9.3.1.4) - TUYA_TEMP_SET_RES - (Tuya)
|
||||
};
|
||||
} SysMBitfield2;
|
||||
|
||||
|
|
|
|||
|
|
@ -172,6 +172,7 @@
|
|||
#define MQTT_BUTTON_SWITCH_FORCE_LOCAL false // [SetOption61] Force local operation when button/switch topic is set (false = off, true = on)
|
||||
#define MQTT_INDEX_SEPARATOR false // [SetOption64] Enable "_" instead of "-" as sensor index separator
|
||||
#define MQTT_TUYA_RECEIVED false // [SetOption66] Enable TuyaMcuReceived messages over Mqtt
|
||||
#define MQTT_ONLY_JSON_OUTPUT false // [SetOption90] Disable non-json messages
|
||||
#define MQTT_TLS_ENABLED false // [SetOption103] Enable TLS mode (requires TLS version)
|
||||
#define MQTT_TLS_FINGERPRINT false // [SetOption132] Force TLS fingerprint validation instead of CA (requires TLS version)
|
||||
|
||||
|
|
@ -185,7 +186,10 @@
|
|||
#define CORS_DOMAIN "" // [Cors] CORS Domain for preflight requests
|
||||
|
||||
// -- HTTP Options --------------------------------
|
||||
#define GUI_NOSHOW_MODULE false // [SetOption141] Do not show module name in GUI main menu
|
||||
#define GUI_NOSHOW_DEVICENAME false // [SetOption163] Do not show device name in GUI main menu
|
||||
#define GUI_SHOW_HOSTNAME false // [SetOption53] Show hostname and IP address in GUI main menu
|
||||
#define GUI_NOSHOW_STATETEXT false // [SetOption161] Do not show power state text in GUI
|
||||
|
||||
// -- HTTP GUI Colors -----------------------------
|
||||
// HTML hex color codes. Only 3 and 6 digit hex string values are supported!! See https://www.w3schools.com/colors/colors_hex.asp
|
||||
|
|
|
|||
|
|
@ -1105,7 +1105,10 @@ void SettingsDefaultSet2(void) {
|
|||
flag2.emulation |= EMULATION;
|
||||
flag4.alexa_gen_1 |= EMULATION_HUE_1ST_GEN;
|
||||
#endif // FIRMWARE_MINIMAL
|
||||
flag5.gui_module_name |= GUI_NOSHOW_MODULE;
|
||||
flag6.gui_device_name |= GUI_NOSHOW_DEVICENAME;
|
||||
flag3.gui_hostname_ip |= GUI_SHOW_HOSTNAME;
|
||||
flag6.gui_no_state_text |= GUI_NOSHOW_STATETEXT;
|
||||
flag3.mdns_enabled |= MDNS_ENABLED;
|
||||
Settings->webserver = WEB_SERVER;
|
||||
Settings->weblog_level = WEB_LOG_LEVEL;
|
||||
|
|
@ -1156,6 +1159,7 @@ void SettingsDefaultSet2(void) {
|
|||
flag3.no_hold_retain |= MQTT_NO_HOLD_RETAIN;
|
||||
flag3.use_underscore |= MQTT_INDEX_SEPARATOR;
|
||||
flag3.grouptopic_mode |= MQTT_GROUPTOPIC_FORMAT;
|
||||
flag4.only_json_message |= MQTT_ONLY_JSON_OUTPUT;
|
||||
SettingsUpdateText(SET_MQTT_HOST, MQTT_HOST);
|
||||
Settings->mqtt_port = MQTT_PORT;
|
||||
SettingsUpdateText(SET_MQTT_CLIENT, PSTR(MQTT_CLIENT_ID));
|
||||
|
|
@ -1244,7 +1248,6 @@ void SettingsDefaultSet2(void) {
|
|||
|
||||
// RF Bridge
|
||||
#ifndef FIRMWARE_MINIMAL // not needed in minimal/safeboot because of disabled feature and Settings are not saved anyways
|
||||
flag.rf_receive_decimal |= RF_DATA_RADIX;
|
||||
// for (uint32_t i = 0; i < 17; i++) { Settings->rf_code[i][0] = 0; }
|
||||
memcpy_P(Settings->rf_code[0], kDefaultRfCode, 9);
|
||||
#endif // FIRMWARE_MINIMAL
|
||||
|
|
@ -1855,7 +1858,6 @@ void SettingsDelta(void) {
|
|||
char scolor[10];
|
||||
WebHexCode(COL_BUTTON_OFF, GetTextIndexed(scolor, sizeof(scolor), COL_BUTTON_OFF, kWebColors));
|
||||
}
|
||||
|
||||
if (Settings->version < 0x0E030007) { // 14.3.0.7
|
||||
// move up uint8_t knx_CB_registered from 4A8 to 533
|
||||
memmove_P((uint8_t*)&Settings->knx_CB_registered, (uint8_t*)&Settings->switchmode, 1);
|
||||
|
|
|
|||
Loading…
Reference in New Issue