mirror of https://github.com/arendst/Tasmota.git
Change command ``Power`` should not reset pulsetime
Change command ``Power`` should not reset pulsetime (#11805)
This commit is contained in:
parent
b8647a9826
commit
2fc3b93e9d
|
@ -4,8 +4,8 @@ All notable changes to this project will be documented in this file.
|
|||
## [Unreleased] - Development
|
||||
|
||||
## [9.4.0.1]
|
||||
|
||||
|
||||
### Changed
|
||||
- Command ``Power`` should not reset pulsetime (#11805)
|
||||
|
||||
## [Released]
|
||||
|
||||
|
|
|
@ -76,75 +76,15 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
|
|||
|
||||
[Complete list](BUILDS.md) of available feature and sensors.
|
||||
|
||||
## Changelog v9.4.0 Leslie
|
||||
## Changelog v9.4.0.1
|
||||
### Added
|
||||
- Command ``Sensor80 1 <0..7>`` to control MFRC522 RFID antenna gain from 18dB (0) to 48dB (7) [#11073](https://github.com/arendst/Tasmota/issues/11073)
|
||||
- Command ``SerialBuffer 256..520`` to change hardware serial receive buffer size from default (256) to max local buffer size (520) [#11448](https://github.com/arendst/Tasmota/issues/11448)
|
||||
- Command ``SetOption126 1`` to enable DS18x20 arithmetic mean over teleperiod for JSON temperature based on [#11472](https://github.com/arendst/Tasmota/issues/11472)
|
||||
- Command ``Backlog0`` to allow execution of following commands without delay
|
||||
- Command ``TuyaTempSetRes 0..3`` to control Tuya Temperature Set Resolution [#11781](https://github.com/arendst/Tasmota/issues/11781)
|
||||
- Commands ``MqttKeepAlive 1..100`` to set Mqtt Keep Alive timer (default 30) and ``MqttTimeout 1..100`` to set Mqtt Socket Timeout (default 4) [#5341](https://github.com/arendst/Tasmota/issues/5341)
|
||||
- Commands ``DisplayType`` to select sub-modules where implemented and ``DisplayInvert`` to select inverted display where implemented
|
||||
- Support for SML VBUS [#11125](https://github.com/arendst/Tasmota/issues/11125)
|
||||
- Support for NEC and OPTOMA LCD/DLP Projector serial power control by Jan Bubík [#11145](https://github.com/arendst/Tasmota/issues/11145)
|
||||
- Support for XPT2046 touch screen digitizer on ILI9341 display by nonix [#11159](https://github.com/arendst/Tasmota/issues/11159)
|
||||
- Support for zigbee lumi.sensor_wleak [#11200](https://github.com/arendst/Tasmota/issues/11200)
|
||||
- Support for dummy energy monitor using user values set by commands ``VoltageSet``, ``CurrentSet``, ``PowerSet`` and ``FrequencySet``. Enable by selecting any GPIO as ``Option A2`` [#10640](https://github.com/arendst/Tasmota/issues/10640)
|
||||
- Support for CSE7761 energy monitor as used in ESP32 based Sonoff Dual R3 Pow [#10793](https://github.com/arendst/Tasmota/issues/10793)
|
||||
- Support for Frequency monitoring and zero-cross detection on CSE7761 (Sonoff Dual R3)
|
||||
- Support for TM1638 seven segment display by Ajith Vasudevan [#11031](https://github.com/arendst/Tasmota/issues/11031)
|
||||
- Support for MAX7219 seven segment display by Ajith Vasudevan [#11387](https://github.com/arendst/Tasmota/issues/11387)
|
||||
- Support for MPU6886 on primary or secondary I2C bus
|
||||
- Support for multiple CCS811 sensors with baseline control (USE_CCS811_V2) by clanganke [#10858](https://github.com/arendst/Tasmota/issues/10858)
|
||||
- Allow MCP230xx pinmode from output to input [#11104](https://github.com/arendst/Tasmota/issues/11104)
|
||||
- Berry improvements [#11163](https://github.com/arendst/Tasmota/issues/11163)
|
||||
- Extent compile time SetOptions support [#11204](https://github.com/arendst/Tasmota/issues/11204)
|
||||
- Tasmota discovery as alternative to Home Assistant discovery using define ``USE_TASMOTA_DISCOVERY``
|
||||
- Optional GUI file editor enabled with define ``GUI_EDIT_FILE`` by barbudor [#11668](https://github.com/arendst/Tasmota/issues/11668)
|
||||
- Initial support for universal display driver UDisplay by Gerhard Mutz. Enable by selecting any GPIO as ``Option A3`` [#11665](https://github.com/arendst/Tasmota/issues/11665)
|
||||
- ESP32 Extent BLE [#11212](https://github.com/arendst/Tasmota/issues/11212)
|
||||
- ESP32 support for WS2812 hardware driver via RMT or I2S
|
||||
- ESP32 support for secondary I2C controller
|
||||
- ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
|
||||
- ESP32 support for LVGL 7.11 with Berry binding by Stephan Hadinger [#11789](https://github.com/arendst/Tasmota/issues/11789)
|
||||
|
||||
### Breaking Changed
|
||||
- ESP32 partition layout changed to accomodate more file space on most and more code space on core2 and odroid-go [#11746](https://github.com/arendst/Tasmota/issues/11746)
|
||||
|
||||
### Changed
|
||||
- TasmotaSerial library from v3.2.0 to v3.3.0
|
||||
- PubSubClient library from EspEasy v2.7.12 to Tasmota v2.8.12
|
||||
- IRremoteESP8266 library from v2.7.15 to v2.7.16
|
||||
- ESP32 core library from v1.0.5-rc6 to v1.0.6
|
||||
- TuyaMcu dimmer timeout [#11121](https://github.com/arendst/Tasmota/issues/11121)
|
||||
- Rename epaper 42 commands [#11222](https://github.com/arendst/Tasmota/issues/11222)
|
||||
- DeepSleep announcement topic [#11223](https://github.com/arendst/Tasmota/issues/11223)
|
||||
- Limit number of relay/button columns in GUI to 8 [#11546](https://github.com/arendst/Tasmota/issues/11546)
|
||||
- ADC range result from int to float using command ``FreqRes`` for decimal resolution selection [#11545](https://github.com/arendst/Tasmota/issues/11545)
|
||||
- Removed overtemp detection on external energy monitoring devices [#11628](https://github.com/arendst/Tasmota/issues/11628)
|
||||
- Redesigned initial GUI wifi configuration by Adrian Scillato [#11693](https://github.com/arendst/Tasmota/issues/11693)
|
||||
- Redesigned GUI by moving non-configuration buttons from ``Configuration`` to new submenu ``Consoles``
|
||||
- In tasmota-sensors.bin enabled support for VL53L0X and disabled TSL2561 [#11711](https://github.com/arendst/Tasmota/issues/11711)
|
||||
- Add HLW8012/BL0937 average pulse calculation by Alex Lovett [#11722](https://github.com/arendst/Tasmota/issues/11722)
|
||||
- ESP32 **tasmota32-knx**, **tasmota32-sensors** and **tasmota32-lite** binaries consolidated in **tasmota32.bin** binary
|
||||
- Command ``Power`` should not reset pulsetime [#11805](https://github.com/arendst/Tasmota/issues/11805)
|
||||
|
||||
### Fixed
|
||||
- PN532 on ESP32 Serial flush both Tx and Rx buffers [#10910](https://github.com/arendst/Tasmota/issues/10910)
|
||||
- Light scheme related color changes [#11041](https://github.com/arendst/Tasmota/issues/11041)
|
||||
- Refactor acceleration function for shutter stepper and servo [#11088](https://github.com/arendst/Tasmota/issues/11088)
|
||||
- LM75AD detection on different addresses [#11096](https://github.com/arendst/Tasmota/issues/11096)
|
||||
- Timer loop when console is scrolled up regression from v9.3.0 [#11108](https://github.com/arendst/Tasmota/issues/11108)
|
||||
- Display exception when no file system is present [#11125](https://github.com/arendst/Tasmota/issues/11125)
|
||||
- Scripter and SML fixes [#11150](https://github.com/arendst/Tasmota/issues/11150)
|
||||
- Zigbee exception when bad frame is received [#11192](https://github.com/arendst/Tasmota/issues/11192)
|
||||
- ESP32 flash script for Odroid and Core2 [#11227](https://github.com/arendst/Tasmota/issues/11227)
|
||||
- ESP32 WS2812 bitbang support [#11248](https://github.com/arendst/Tasmota/issues/11248)
|
||||
- DS18x20 driver timing issue [#11270](https://github.com/arendst/Tasmota/issues/11270)
|
||||
- Alexa discovery in hue emulation [#11415](https://github.com/arendst/Tasmota/issues/11415)
|
||||
- HC-SR04 on ESP32 release serial interface if not used [#11507](https://github.com/arendst/Tasmota/issues/11507)
|
||||
- Alexa discovery for ZBBridge [#11576](https://github.com/arendst/Tasmota/issues/11576)
|
||||
- Telegram chat id incorrect size [#11660](https://github.com/arendst/Tasmota/issues/11660)
|
||||
- KNX energy yesterday [#11718](https://github.com/arendst/Tasmota/issues/11718)
|
||||
|
||||
### Noted
|
||||
- ESP32 single core **tasmota32solo1.bin** binary can only be uploaded using the GUI as OTA upload will trigger the watchdog timer
|
|
@ -599,7 +599,9 @@ void ExecuteCommandPower(uint32_t device, uint32_t state, uint32_t source)
|
|||
}
|
||||
TasmotaGlobal.active_device = device;
|
||||
|
||||
SetPulseTimer((device -1) % MAX_PULSETIMERS, 0);
|
||||
if (state != POWER_SHOW_STATE) {
|
||||
SetPulseTimer((device -1) % MAX_PULSETIMERS, 0);
|
||||
}
|
||||
|
||||
static bool interlock_mutex = false; // Interlock power command pending
|
||||
power_t mask = 1 << (device -1); // Device to control
|
||||
|
|
Loading…
Reference in New Issue