mirror of https://github.com/arendst/Tasmota.git
Merge pull request #14854 from jvstch/release/Add-BL6523-Energy-monitor
Added support for BL6523 chipset based Energy Monitors
This commit is contained in:
Theo Arends
GitHub
commit
386f4090a3
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Herzschlag"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 - RX"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 - TX"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Battito cardiaco"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 - SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 - RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "Kierunek wiatru"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -847,6 +847,8 @@
|
|||
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
||||
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
||||
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
||||
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
||||
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
||||
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
||||
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
||||
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
||||
|
|
|
|||
|
|
@ -182,6 +182,7 @@ enum UserSelectablePins {
|
|||
GPIO_SDM230_TX, GPIO_SDM230_RX, // SDM230 Serial interface
|
||||
GPIO_ADC_MQ, // Analog MQ Sensor
|
||||
GPIO_CM11_TXD, GPIO_CM11_RXD, // CM11 Serial interface
|
||||
GPIO_BL6523_TX, GPIO_BL6523_RX, // BL6523 based Watt meter Serial interface
|
||||
GPIO_SENSOR_END };
|
||||
|
||||
enum ProgramSelectablePins {
|
||||
|
|
@ -403,6 +404,7 @@ const char kSensorNames[] PROGMEM =
|
|||
D_SENSOR_SDM230_TX "|" D_SENSOR_SDM230_RX "|"
|
||||
D_SENSOR_ADC_MQ "|"
|
||||
D_SENSOR_CM11_TX "|" D_SENSOR_CM11_RX "|"
|
||||
D_SENSOR_BL6523_TX "|" D_SENSOR_BL6523_RX "|"
|
||||
;
|
||||
|
||||
const char kSensorNamesFixed[] PROGMEM =
|
||||
|
|
@ -770,6 +772,10 @@ const uint16_t kGpioNiceList[] PROGMEM = {
|
|||
AGPIO(GPIO_SDM230_TX), // SDM230 Serial interface
|
||||
AGPIO(GPIO_SDM230_RX), // SDM230 Serial interface
|
||||
#endif
|
||||
#ifdef USE_BL6523
|
||||
AGPIO(GPIO_BL6523_TX), // BL6523 based Watt meter Serial interface
|
||||
AGPIO(GPIO_BL6523_RX), // BL6523 based Watt meter Serial interface
|
||||
#endif
|
||||
#endif // USE_ENERGY_SENSOR
|
||||
|
||||
/*-------------------------------------------------------------------------------------------*\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,356 @@
|
|||
/*
|
||||
xsns_96_bl6523.ino - Chinese bl6523 based Watt hour meter support for Tasmota
|
||||
|
||||
Copyright (C) 2022 Jeevas Vasudevan and the Internet
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifdef USE_ENERGY_SENSOR
|
||||
#ifdef USE_BL6523
|
||||
/*********************************************************************************************\
|
||||
* Chinese BL6523 based Watt hour meter
|
||||
*
|
||||
* This meter provides accurate Voltage, Frequency, Ampere, Wattage, Power Factor, KWh
|
||||
* To use Tasmota the user needs to add an ESP8266 or ESP32
|
||||
* Three lines need to be connected via 1KOhh resistors to ESP from the main board(RX,TX GND)
|
||||
*
|
||||
* Connection Eg (ESP8266) - Non - Isolated:
|
||||
* BL6523 RX ->1KOhm-> ESP IO4(D2) (Should be Input Capable)
|
||||
* BL6523 TX ->1KOhm-> ESP IO5(D1) (Should be Input Capable)
|
||||
* BL6523 GND -> ESP GND
|
||||
*
|
||||
* Connection Eg (ESP32) - Non - Isolated:
|
||||
* BL6523 RX ->1KOhm-> ESP IO4 (Should be Input Capable)
|
||||
* BL6523 TX ->1KOhm-> ESP IO5 (Should be Input Capable)
|
||||
* BL6523 GND -> ESP GND
|
||||
*
|
||||
* To build add the below to user_config_override.h
|
||||
* #define USE_ENERGY_SENSOR // Enable Energy sensor framework
|
||||
* #define USE_BL6523 // Add support for Chinese BL6523 based Watt hour meter (+1k code)¸
|
||||
*
|
||||
* After Installation use the below template sample:
|
||||
* {"NAME":"BL6523 Smart Meter","GPIO":[0,0,0,0,7488,7520,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XNRG_22 22
|
||||
|
||||
#include <TasmotaSerial.h>
|
||||
|
||||
#define BL6523_RX_DATASET_SIZE 2
|
||||
#define BL6523_TX_DATASET_SIZE 4
|
||||
|
||||
#define BL6523_BAUD 4800
|
||||
#define BL6523_REG_AMPS 0x05
|
||||
#define BL6523_REG_VOLTS 0x07
|
||||
#define BL6523_REG_FREQ 0x09
|
||||
#define BL6523_REG_WATTS 0x0A
|
||||
#define BL6523_REG_POWF 0x08
|
||||
#define BL6523_REG_WATTHR 0x0C
|
||||
|
||||
#define SINGLE_PHASE 0
|
||||
#define RX_WAIT 100
|
||||
|
||||
#define BL6523_IREF 297899
|
||||
#define BL6523_UREF 13304
|
||||
#define BL6523_FREF 3907
|
||||
#define BL6523_PREF 707
|
||||
#define BL6523_PWHRREF_D 33 // Substract this from BL6523_PREF to get WattHr Div.
|
||||
|
||||
TasmotaSerial *Bl6523RxSerial;
|
||||
TasmotaSerial *Bl6523TxSerial;
|
||||
|
||||
struct BL6523
|
||||
{
|
||||
uint8_t type = 1;
|
||||
uint8_t valid = 0;
|
||||
uint8_t got_data_stone = 0;
|
||||
bool discovery_triggered = false;
|
||||
} Bl6523;
|
||||
|
||||
bool Bl6523ReadData(void)
|
||||
{
|
||||
uint32_t powf_word = 0, powf_buf = 0, i = 0;
|
||||
float powf = 0.0f;
|
||||
|
||||
if (!Bl6523RxSerial->available())
|
||||
{
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:No Rx Data available" ));
|
||||
return false;
|
||||
}
|
||||
|
||||
while ((Bl6523RxSerial->peek() != 0x35) && Bl6523RxSerial->available())
|
||||
{
|
||||
Bl6523RxSerial->read();
|
||||
}
|
||||
|
||||
if (Bl6523RxSerial->available() < BL6523_RX_DATASET_SIZE)
|
||||
{
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:Rx less than expected" ));
|
||||
return false;
|
||||
}
|
||||
|
||||
uint8_t rx_buffer[BL6523_RX_DATASET_SIZE];
|
||||
Bl6523RxSerial->readBytes(rx_buffer, BL6523_RX_DATASET_SIZE);
|
||||
Bl6523RxSerial->flush(); // Make room for another burst
|
||||
|
||||
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, rx_buffer, BL6523_RX_DATASET_SIZE);
|
||||
|
||||
i=0;
|
||||
while (Bl6523TxSerial->available() < BL6523_TX_DATASET_SIZE)
|
||||
{
|
||||
// sleep till TX buffer is full
|
||||
delay(10);
|
||||
if ( i++ > RX_WAIT ){
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
uint8_t tx_buffer[BL6523_TX_DATASET_SIZE];
|
||||
Bl6523TxSerial->readBytes(tx_buffer, BL6523_TX_DATASET_SIZE);
|
||||
Bl6523TxSerial->flush(); // Make room for another burst
|
||||
|
||||
|
||||
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, tx_buffer, BL6523_TX_DATASET_SIZE);
|
||||
|
||||
/* Checksum: （Addr+Data_L+Data_M+Data_H） & 0xFF, then byte invert */
|
||||
uint8_t crc = rx_buffer[1]; //Addr
|
||||
for (uint32_t i = 0; i < (BL6523_TX_DATASET_SIZE - 1); i++)
|
||||
{
|
||||
crc += tx_buffer[i]; //Add Data_L,Data_M and Data_H to Addr
|
||||
}
|
||||
crc &= 0xff; // Bitwise AND 0xFF
|
||||
crc = ~crc; // Invert the byte
|
||||
if (crc != tx_buffer[BL6523_TX_DATASET_SIZE - 1])
|
||||
{
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL6:" D_CHECKSUM_FAILURE));
|
||||
Bl6523TxSerial->flush();
|
||||
Bl6523RxSerial->flush();
|
||||
return false;
|
||||
}
|
||||
|
||||
/* WRITE DATA (format: command(write->0xCA) address data_low data_mid data_high checksum )
|
||||
WRITE Sample(RX):
|
||||
RX: CA 3E 55 00 00 6C (WRPROT - allow)
|
||||
RX: CA 14 00 00 10 DB (MODE)
|
||||
RX: CA 15 04 00 00 E6 (GAIN - IB 16x gain )
|
||||
RX: CA 19 08 00 00 DE (WA_CFDIV )
|
||||
RX: CA 3E AA 00 00 17 (WRPROT - disable)
|
||||
*/
|
||||
|
||||
/* READ DATA (format: command(read->0x35) address data_low data_mid data_high checksum )
|
||||
READ Sample(RX-TX) Data:
|
||||
RX: 35 05 TX: E4 00 00 16 (IA rms )
|
||||
RX: 35 07 TX: D5 A3 2E 52 (V rms )
|
||||
RX: 35 09 TX: F0 FB 02 09 (FREQ)
|
||||
RX: 35 0A TX: 00 00 00 F5 (WATT)
|
||||
RX: 35 08 TX: 00 00 00 F7 (PF)
|
||||
RX: 35 0C TX: 00 00 00 F3 (WATT_HR)
|
||||
*/
|
||||
|
||||
switch(rx_buffer[1]) {
|
||||
case BL6523_REG_AMPS :
|
||||
Energy.current[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_current_calibration; // 1.260 A
|
||||
break;
|
||||
case BL6523_REG_VOLTS :
|
||||
Energy.voltage[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_voltage_calibration; // 230.2 V
|
||||
break;
|
||||
case BL6523_REG_FREQ :
|
||||
Energy.frequency[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_frequency_calibration; // 50.0 Hz
|
||||
break;
|
||||
case BL6523_REG_WATTS :
|
||||
Energy.active_power[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_power_calibration; // -196.3 W
|
||||
break;
|
||||
case BL6523_REG_POWF :
|
||||
/* Power factor =(sign bit)*((PF[22]×2^－1）＋（PF[21]×2^－2）＋。。。)
|
||||
Eg., reg value 0x7FFFFF(HEX) -> PF 1, 0x800000(HEX) -> -1, 0x400000(HEX) -> 0.5
|
||||
*/
|
||||
powf = 0.0f;
|
||||
powf_buf = ((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]);
|
||||
powf_word = (powf_buf >> 23) ? ~(powf_buf & 0x7fffff) : powf_buf & 0x7fffff; //Extract the 23 bits and invert if sign bit(24) is set
|
||||
for (int i = 0; i < 23; i++){ // Accumulate powf from 23 bits
|
||||
powf += ((powf_word >> (22-i)) * pow(2,(0-(i+1))));
|
||||
powf_word = powf_word & (0x7fffff >> (1+i));
|
||||
}
|
||||
powf = (powf_buf >> 23) ? (0.0f - (powf)) : powf; // Negate if sign bit(24) is set
|
||||
Energy.power_factor[SINGLE_PHASE] = powf;
|
||||
break;
|
||||
case BL6523_REG_WATTHR :
|
||||
Energy.import_active[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / ( Settings->energy_power_calibration - BL6523_PWHRREF_D ); // 6.216 kWh => used in EnergyUpdateTotal()
|
||||
break;
|
||||
default :
|
||||
break;
|
||||
}
|
||||
Energy.data_valid[SINGLE_PHASE] = 0;
|
||||
EnergyUpdateTotal();
|
||||
if (!Bl6523.discovery_triggered)
|
||||
{
|
||||
TasmotaGlobal.discovery_counter = 1; // force TasDiscovery()
|
||||
Bl6523.discovery_triggered = true;
|
||||
}
|
||||
return true;
|
||||
|
||||
}
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
void Bl6523Update(void)
|
||||
{ // Every 250 millisecond
|
||||
if (Bl6523ReadData())
|
||||
{
|
||||
Bl6523.valid = 60;
|
||||
}
|
||||
else
|
||||
{
|
||||
if (Bl6523.valid) {
|
||||
Bl6523.valid--;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
void Bl6523Init(void)
|
||||
{
|
||||
|
||||
Bl6523.type = 0;
|
||||
Bl6523RxSerial = new TasmotaSerial(Pin(GPIO_BL6523_RX), -1, 1);
|
||||
Bl6523TxSerial = new TasmotaSerial(Pin(GPIO_BL6523_TX), -1, 1);
|
||||
if ((Bl6523RxSerial->begin(BL6523_BAUD)) && (Bl6523TxSerial->begin(BL6523_BAUD)))
|
||||
{
|
||||
if (Bl6523RxSerial->hardwareSerial())
|
||||
{
|
||||
ClaimSerial();
|
||||
}
|
||||
if (Bl6523TxSerial->hardwareSerial())
|
||||
{
|
||||
ClaimSerial();
|
||||
}
|
||||
Bl6523.type = 1;
|
||||
Energy.phase_count = 1;
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:Init Success" ));
|
||||
}
|
||||
else
|
||||
{
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:Init Failure!" ));
|
||||
TasmotaGlobal.energy_driver = ENERGY_NONE;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
bool Bl6523Command(void) {
|
||||
bool serviced = true;
|
||||
|
||||
int32_t value = (int32_t)(CharToFloat(XdrvMailbox.data) * 1000); // 1.234 = 1234, -1.234 = -1234
|
||||
uint32_t abs_value = abs(value) / 10; // 1.23 = 123, -1.23 = 123
|
||||
|
||||
if ((CMND_POWERCAL == Energy.command_code) || (CMND_VOLTAGECAL == Energy.command_code) || (CMND_CURRENTCAL == Energy.command_code)) {
|
||||
// Service in xdrv_03_energy.ino
|
||||
}
|
||||
else if (CMND_POWERSET == Energy.command_code) {
|
||||
if (XdrvMailbox.data_len) {
|
||||
if ((abs_value > 100) && (abs_value < 200000)) { // Between 1.00 and 2000.00 W
|
||||
Settings->energy_power_calibration = abs_value;
|
||||
}
|
||||
}
|
||||
}
|
||||
else if (CMND_VOLTAGESET == Energy.command_code) {
|
||||
if (XdrvMailbox.data_len) {
|
||||
if ((abs_value > 10000) && (abs_value < 26000)) { // Between 100.00 and 260.00 V
|
||||
Settings->energy_voltage_calibration = abs_value;
|
||||
}
|
||||
}
|
||||
}
|
||||
else if (CMND_CURRENTSET == Energy.command_code) {
|
||||
if (XdrvMailbox.data_len) {
|
||||
if ((abs_value > 1000) && (abs_value < 1000000)) { // Between 10.00 mA and 10.00000 A
|
||||
Settings->energy_current_calibration = abs_value;
|
||||
}
|
||||
}
|
||||
}
|
||||
else if (CMND_FREQUENCYSET == Energy.command_code) {
|
||||
if (XdrvMailbox.data_len) {
|
||||
if ((abs_value > 4500) && (abs_value < 6500)) { // Between 45.00 and 65.00 Hz
|
||||
Settings->energy_frequency_calibration = abs_value;
|
||||
}
|
||||
}
|
||||
}
|
||||
else if (CMND_ENERGYCONFIG == Energy.command_code) {
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Config index %d, payload %d, value %d, data '%s'"),
|
||||
XdrvMailbox.index, XdrvMailbox.payload, value, XdrvMailbox.data ? XdrvMailbox.data : "null" );
|
||||
|
||||
// EnergyConfig1 to 3 = Set Energy.current[channel] in A like 0.417 for 417mA
|
||||
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index < 4)) {
|
||||
//Bl6523.current[XdrvMailbox.index -1] = value;
|
||||
}
|
||||
// EnergyConfig4 to 6 = Set Energy.active_power[channel] in W like 100 for 100W
|
||||
if ((XdrvMailbox.index > 3) && (XdrvMailbox.index < 7)) {
|
||||
//Bl6523.power[XdrvMailbox.index -4] = value;
|
||||
}
|
||||
}
|
||||
else serviced = false; // Unknown command
|
||||
|
||||
return serviced;
|
||||
}
|
||||
|
||||
void Bl6523DrvInit(void)
|
||||
{
|
||||
if (PinUsed(GPIO_BL6523_RX) && PinUsed(GPIO_BL6523_TX)) {
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:PreInit Success" ));
|
||||
TasmotaGlobal.energy_driver = XNRG_22;
|
||||
if (HLW_PREF_PULSE == Settings->energy_power_calibration) {
|
||||
Settings->energy_frequency_calibration = BL6523_FREF;
|
||||
Settings->energy_voltage_calibration = BL6523_UREF;
|
||||
Settings->energy_current_calibration = BL6523_IREF;
|
||||
Settings->energy_power_calibration = BL6523_PREF;
|
||||
}
|
||||
|
||||
}
|
||||
else
|
||||
{
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:PreInit Failure!" ));
|
||||
TasmotaGlobal.energy_driver = ENERGY_NONE;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Interface
|
||||
\*********************************************************************************************/
|
||||
|
||||
bool Xnrg22(uint8_t function)
|
||||
{
|
||||
bool result = false;
|
||||
|
||||
switch (function)
|
||||
{
|
||||
case FUNC_EVERY_250_MSECOND:
|
||||
Bl6523Update();
|
||||
break;
|
||||
case FUNC_COMMAND:
|
||||
result = Bl6523Command();
|
||||
break;
|
||||
case FUNC_INIT:
|
||||
Bl6523Init();
|
||||
break;
|
||||
case FUNC_PRE_INIT:
|
||||
Bl6523DrvInit();
|
||||
break;
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
#endif // USE_BL6523
|
||||
#endif // USE_ENERGY_SENSOR
|
||||
Loading…
Reference in New Issue