mirror of https://github.com/arendst/Tasmota.git
Adrian
GitHub
commit
41c0e59d54
|
|
@ -1,4 +1,5 @@
|
|||
/* 5.12.0e
|
||||
* Add Domoticz dust (custom) sensors to PMS5003 and NovaFitness SDS drivers as PM1, PM2.5 and PM10
|
||||
* Add a second TLS fingerprint to allow switching keys in TLS mode (#2033, #2102)
|
||||
* Add display of remaining pulse time to command PulseTime (#2085)
|
||||
* Add additional time offset to Wifi Retry based on device mac address (#2089)
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
cz-CZ.h - localization for Czech with diacritics - Czech for Sonoff-Tasmota
|
||||
cs-CZ.h - localization for Czech with diacritics - Czech for Sonoff-Tasmota
|
||||
|
||||
Copyright (C) 2018 Theo Arends (translated by vs)
|
||||
|
||||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Velikost dat"
|
||||
#define D_ANALOG_INPUT "Analogový vstup"
|
||||
|
||||
#define D_FINGERPRINT "Verifikuj otisk TLS..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do"
|
||||
#define D_RETRY_IN "Zopakuji za"
|
||||
#define D_VERIFIED "Ověřeno otisk "
|
||||
#define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS"
|
||||
#define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Zablokování smyčky"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Zapni úroveň 2 zápisu Weblog, pokud je očekávána odpověď"
|
||||
#define D_NEED_USER_AND_PASSWORD "Vyžadován uživatel=<username>&heslo=<password>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Verifikuj otisk TLS..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do"
|
||||
#define D_RETRY_IN "Zopakuji za"
|
||||
#define D_VERIFIED "Ověřeno otisk "
|
||||
#define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS"
|
||||
#define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast je vypnutý"
|
||||
#define D_MULTICAST_REJOINED "Multicast opět připojený"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Vlhk,Tlak"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Příkon,Energie"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Osvětlení"
|
||||
#define D_DOMOTICZ_COUNT "Počítadlo"
|
||||
#define D_DOMOTICZ_VOLTAGE "Napětí"
|
||||
#define D_DOMOTICZ_CURRENT "Proud"
|
||||
#define D_DOMOTICZ_COUNT "Počítadlo/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Napětí/PM2,5"
|
||||
#define D_DOMOTICZ_CURRENT "Proud/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Aktualizace stopek"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Datengröße"
|
||||
#define D_ANALOG_INPUT "Analog"
|
||||
|
||||
#define D_FINGERPRINT "TLS-Fingerabdruck wird verifiziert..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS-Verbindung fehlgeschlagen an"
|
||||
#define D_RETRY_IN "Wiederversuch in"
|
||||
#define D_VERIFIED "verifiziert mit Fingerabdruck"
|
||||
#define D_INSECURE "unsichere Verbindung aufgrund ungültigen Fingerabdrucks"
|
||||
#define D_CONNECT_FAILED_TO "Verbindung fehlgeschlagen aufgrund von"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Blocked Loop"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Aktivere Web Log Level 2 falls Reaktion erwartet"
|
||||
#define D_NEED_USER_AND_PASSWORD "Benutzer benötigt=<Benutzername>&password=<Passwort>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "TLS-Fingerabdruck wird verifiziert..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS-Verbindung fehlgeschlagen an"
|
||||
#define D_RETRY_IN "Wiederversuch in"
|
||||
#define D_VERIFIED "verifiziert mit Fingerabdruck"
|
||||
#define D_INSECURE "unsichere Verbindung aufgrund ungültigen Fingerabdrucks"
|
||||
#define D_CONNECT_FAILED_TO "Verbindung fehlgeschlagen aufgrund von"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast deaktiviert"
|
||||
#define D_MULTICAST_REJOINED "Multicast (wieder-)verbunden"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
|
||||
#define D_DOMOTICZ_COUNT "Count"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage"
|
||||
#define D_DOMOTICZ_CURRENT "Current"
|
||||
#define D_DOMOTICZ_COUNT "Count/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5"
|
||||
#define D_DOMOTICZ_CURRENT "Current/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Data Size"
|
||||
#define D_ANALOG_INPUT "Analog"
|
||||
|
||||
#define D_FINGERPRINT "Verify TLS fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS Connect failed to"
|
||||
#define D_RETRY_IN "Retry in"
|
||||
#define D_VERIFIED "Verified using Fingerprint"
|
||||
#define D_INSECURE "Insecure connection due to invalid Fingerprint"
|
||||
#define D_CONNECT_FAILED_TO "Connect failed to"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Blocked Loop"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Enable weblog 2 if response expected"
|
||||
#define D_NEED_USER_AND_PASSWORD "Need user=<username>&password=<password>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Verify TLS fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS Connect failed to"
|
||||
#define D_RETRY_IN "Retry in"
|
||||
#define D_VERIFIED "Verified using Fingerprint"
|
||||
#define D_INSECURE "Insecure connection due to invalid Fingerprint"
|
||||
#define D_CONNECT_FAILED_TO "Connect failed to"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast disabled"
|
||||
#define D_MULTICAST_REJOINED "Multicast (re)joined"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
|
||||
#define D_DOMOTICZ_COUNT "Count"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage"
|
||||
#define D_DOMOTICZ_CURRENT "Current"
|
||||
#define D_DOMOTICZ_COUNT "Count/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5"
|
||||
#define D_DOMOTICZ_CURRENT "Current/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Tamaño de Datos"
|
||||
#define D_ANALOG_INPUT "Entrada Analógica"
|
||||
|
||||
#define D_FINGERPRINT "Verificar TLS fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Falló Conección TLS a"
|
||||
#define D_RETRY_IN "Reintentando"
|
||||
#define D_VERIFIED "Verificado Fingerprint"
|
||||
#define D_INSECURE "Conección insegura por Fingerprint no válido"
|
||||
#define D_CONNECT_FAILED_TO "Falló Conección a"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Ciclo Bloqueado"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 si desea respuesta"
|
||||
#define D_NEED_USER_AND_PASSWORD "Se necesita user=<username>&password=<password>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Verificar TLS fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Falló Conección TLS a"
|
||||
#define D_RETRY_IN "Reintentando"
|
||||
#define D_VERIFIED "Verificado Fingerprint"
|
||||
#define D_INSECURE "Conección insegura por Fingerprint no válido"
|
||||
#define D_CONNECT_FAILED_TO "Falló Conección a"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast deshabilitado"
|
||||
#define D_MULTICAST_REJOINED "Multicast (re)conectado"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Potencia,Energía"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Luminancia"
|
||||
#define D_DOMOTICZ_COUNT "Contador"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltaje"
|
||||
#define D_DOMOTICZ_CURRENT "Corriente"
|
||||
#define D_DOMOTICZ_COUNT "Contador/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltaje/PM2,5"
|
||||
#define D_DOMOTICZ_CURRENT "Corriente/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "Calidad del Aire"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Intervalo de refresco"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Taille données"
|
||||
#define D_ANALOG_INPUT "Analogique"
|
||||
|
||||
#define D_FINGERPRINT "Verification empreinte TLS ..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Echec de connexion TLS à"
|
||||
#define D_RETRY_IN "Nouvelle tentative dans"
|
||||
#define D_VERIFIED "Verifié empreinte "
|
||||
#define D_INSECURE "Connexion non sécurisée car empreinte non vérifée"
|
||||
#define D_CONNECT_FAILED_TO "Echec de connexion à"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Boucle bloquée"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Activer weblog 2 si response attendue"
|
||||
#define D_NEED_USER_AND_PASSWORD "Nécessite utilisateur=<username>&password=<password>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Verification empreinte TLS ..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Echec de connexion TLS à"
|
||||
#define D_RETRY_IN "Nouvelle tentative dans"
|
||||
#define D_VERIFIED "Verifié empreinte "
|
||||
#define D_INSECURE "Connexion non sécurisée car empreinte non vérifée"
|
||||
#define D_CONNECT_FAILED_TO "Echec de connexion à"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast désactivé"
|
||||
#define D_MULTICAST_REJOINED "Multicast (re)joint"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
|
||||
#define D_DOMOTICZ_COUNT "Count"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage"
|
||||
#define D_DOMOTICZ_CURRENT "Current"
|
||||
#define D_DOMOTICZ_COUNT "Count/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage/PM2,5"
|
||||
#define D_DOMOTICZ_CURRENT "Current/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Adat Méret"
|
||||
#define D_ANALOG_INPUT "Analóg"
|
||||
|
||||
#define D_FINGERPRINT "TLS fingerprint hitelesítése..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS Csatlakozás sikertelen a"
|
||||
#define D_RETRY_IN "Újrapróbálás"
|
||||
#define D_VERIFIED "Hitelesítve Fingerprint"
|
||||
#define D_INSECURE "Nem biztonságos kapcsolat érvénytelen Fingerprint miatt"
|
||||
#define D_CONNECT_FAILED_TO "Sikertelen csatlakozás a"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Blocked Loop"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Engedélyezz 2-es weblogolást több információért"
|
||||
#define D_NEED_USER_AND_PASSWORD "Kell felhasználó=<felhasználónév>&jelszó=<jelszó>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "TLS fingerprint hitelesítése..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS Csatlakozás sikertelen a"
|
||||
#define D_RETRY_IN "Újrapróbálás"
|
||||
#define D_VERIFIED "Hitelesítve Fingerprint"
|
||||
#define D_INSECURE "Nem biztonságos kapcsolat érvénytelen Fingerprint miatt"
|
||||
#define D_CONNECT_FAILED_TO "Sikertelen csatlakozás a"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast kikapcsolva"
|
||||
#define D_MULTICAST_REJOINED "Multicast (újra)csatlakozás"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Hőm,Párat,Légny"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Teljesítmény,Energia"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Fényerő"
|
||||
#define D_DOMOTICZ_COUNT "Szám"
|
||||
#define D_DOMOTICZ_VOLTAGE "Feszültség"
|
||||
#define D_DOMOTICZ_CURRENT "Áram"
|
||||
#define D_DOMOTICZ_COUNT "Szám/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Feszültség/PM2.5"
|
||||
#define D_DOMOTICZ_CURRENT "Áram/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "Légminőség"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Update időzítő"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Dimensione Dati"
|
||||
#define D_ANALOG_INPUT "Ingresso Analogico"
|
||||
|
||||
#define D_FINGERPRINT "Verifica TLS fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Connessione TLS fallita a"
|
||||
#define D_RETRY_IN "Nuovo tentativo in"
|
||||
#define D_VERIFIED "Verificato Fingerprint"
|
||||
#define D_INSECURE "Connessione insicura a causa di Fingerprint non valido"
|
||||
#define D_CONNECT_FAILED_TO "Connessione Fallita a"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Ciclo Bloccato"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Abilitare weblog 2 se e' attesa una risposta"
|
||||
#define D_NEED_USER_AND_PASSWORD "Richiesto user=<username>&password=<password>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Verifica TLS fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Connessione TLS fallita a"
|
||||
#define D_RETRY_IN "Nuovo tentativo in"
|
||||
#define D_VERIFIED "Verificato Fingerprint"
|
||||
#define D_INSECURE "Connessione insicura a causa di Fingerprint non valido"
|
||||
#define D_CONNECT_FAILED_TO "Connessione Fallita a"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast disabilitato"
|
||||
#define D_MULTICAST_REJOINED "Multicast (ri)associato"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
|
||||
#define D_DOMOTICZ_COUNT "Count"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage"
|
||||
#define D_DOMOTICZ_CURRENT "Current"
|
||||
#define D_DOMOTICZ_COUNT "Count/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5"
|
||||
#define D_DOMOTICZ_CURRENT "Current/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Intervallo di aggiornamento"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Data lengte"
|
||||
#define D_ANALOG_INPUT "Analoog"
|
||||
|
||||
#define D_FINGERPRINT "Controleer TLS vingerafdruk..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS Verbinding mislukt naar"
|
||||
#define D_RETRY_IN "Opnieuw proberen over"
|
||||
#define D_VERIFIED "Gecontroleerd met vingerafdruk"
|
||||
#define D_INSECURE "Door ongeldige vingerafdruk een onveilige verbinding"
|
||||
#define D_CONNECT_FAILED_TO "Verbinding mislukt naar"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Blocked Loop"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Schakel weblog 2 in indien antwoord verwacht"
|
||||
#define D_NEED_USER_AND_PASSWORD "Benodig user=<gebruiker>&password=<webwachtwoord>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Controleer TLS vingerafdruk..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS Verbinding mislukt naar"
|
||||
#define D_RETRY_IN "Opnieuw proberen over"
|
||||
#define D_VERIFIED "Gecontroleerd met vingerafdruk"
|
||||
#define D_INSECURE "Door ongeldige vingerafdruk een onveilige verbinding"
|
||||
#define D_CONNECT_FAILED_TO "Verbinding mislukt naar"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast uitgeschakeld"
|
||||
#define D_MULTICAST_REJOINED "Multicast verbonden"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
|
||||
#define D_DOMOTICZ_COUNT "Count"
|
||||
#define D_DOMOTICZ_VOLTAGE "Spanning"
|
||||
#define D_DOMOTICZ_CURRENT "Stroom"
|
||||
#define D_DOMOTICZ_COUNT "Count/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Spanning/PM2,5"
|
||||
#define D_DOMOTICZ_CURRENT "Stroom/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Bijwerk timer"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Wielkość danych"
|
||||
#define D_ANALOG_INPUT "Wej_analogowe"
|
||||
|
||||
#define D_FINGERPRINT "Weryfikuj odcisk TLS..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Nieudane połączenie TLS do"
|
||||
#define D_RETRY_IN "Spróbuj ponownie"
|
||||
#define D_VERIFIED "Zweryfikowano odcisku"
|
||||
#define D_INSECURE "Nieprawidłowe połączenie z powodu błędnego odcisku TLS"
|
||||
#define D_CONNECT_FAILED_TO "Nie udało się nawiązać połączenia"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Pętla zablokowana"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Włącz poziom 2 zapisu Weblog, jeśli oczekiwana jest odpowiedź"
|
||||
#define D_NEED_USER_AND_PASSWORD "Wymagany użytkownik=<username>&hasło=<password>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Weryfikuj odcisk TLS..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Nieudane połączenie TLS do"
|
||||
#define D_RETRY_IN "Spróbuj ponownie"
|
||||
#define D_VERIFIED "Zweryfikowano odcisku"
|
||||
#define D_INSECURE "Nieprawidłowe połączenie z powodu błędnego odcisku TLS"
|
||||
#define D_CONNECT_FAILED_TO "Nie udało się nawiązać połączenia"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast jest wyłączony"
|
||||
#define D_MULTICAST_REJOINED "Multicast (re)dołączony"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Wilg,Cis"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Moc,Energia"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Oświetl."
|
||||
#define D_DOMOTICZ_COUNT "Licznik"
|
||||
#define D_DOMOTICZ_VOLTAGE "Napięcie"
|
||||
#define D_DOMOTICZ_CURRENT "Prąd"
|
||||
#define D_DOMOTICZ_COUNT "Licznik/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Napięcie/PM2,5"
|
||||
#define D_DOMOTICZ_CURRENT "Prąd/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Zaktualizuj czasomierz"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Tamanho de dados"
|
||||
#define D_ANALOG_INPUT "Entrada Analógica"
|
||||
|
||||
#define D_FINGERPRINT "Verifique a impressão digital TLS..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS não conseguiu ligar"
|
||||
#define D_RETRY_IN "Tentativa em"
|
||||
#define D_VERIFIED "Verificado impressão digital "
|
||||
#define D_INSECURE "Ligação insegura devido à impressão digital inválida"
|
||||
#define D_CONNECT_FAILED_TO "A ligação falhou ao"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Loop Bloqueado"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 se resposta esperada"
|
||||
#define D_NEED_USER_AND_PASSWORD "Necessário user=<nome utilizador>&password=<palavra chave>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Verifique a impressão digital TLS..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS não conseguiu ligar"
|
||||
#define D_RETRY_IN "Tentativa em"
|
||||
#define D_VERIFIED "Verificado impressão digital "
|
||||
#define D_INSECURE "Ligação insegura devido à impressão digital inválida"
|
||||
#define D_CONNECT_FAILED_TO "A ligação falhou ao"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast desabilitado"
|
||||
#define D_MULTICAST_REJOINED "Multicast (re)ingressou"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Potência,Energia"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Luminâcia"
|
||||
#define D_DOMOTICZ_COUNT "Contagem"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltagem"
|
||||
#define D_DOMOTICZ_CURRENT "Corrente"
|
||||
#define D_DOMOTICZ_COUNT "Contagem/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltagem/PM2.5"
|
||||
#define D_DOMOTICZ_CURRENT "Corrente/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "Qualidade do Ar"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Tempo de atualização"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "Размер данных"
|
||||
#define D_ANALOG_INPUT "Аналоговый вход"
|
||||
|
||||
#define D_FINGERPRINT "Проверка TLS Fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Сбой подключения TLS к"
|
||||
#define D_RETRY_IN "Повторить"
|
||||
#define D_VERIFIED "Проверено Fingerprint"
|
||||
#define D_INSECURE "Небезопасное соединение, недействительный Fingerprint"
|
||||
#define D_CONNECT_FAILED_TO "Ошибка подключения к"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Блокирующий цикл"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Включить Веб лог уровня 2 если ожидается ответ"
|
||||
#define D_NEED_USER_AND_PASSWORD "Ожидается user=<username>&password=<password>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "Проверка TLS Fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Сбой подключения TLS к"
|
||||
#define D_RETRY_IN "Повторить"
|
||||
#define D_VERIFIED "Проверено Fingerprint"
|
||||
#define D_INSECURE "Небезопасное соединение, недействительный Fingerprint"
|
||||
#define D_CONNECT_FAILED_TO "Ошибка подключения к"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast отключен"
|
||||
#define D_MULTICAST_REJOINED "Multicast (ре)соединился"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
|
||||
#define D_DOMOTICZ_COUNT "Count"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage"
|
||||
#define D_DOMOTICZ_CURRENT "Current"
|
||||
#define D_DOMOTICZ_COUNT "Count/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage/PM2,5"
|
||||
#define D_DOMOTICZ_CURRENT "Current/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
|
||||
|
||||
|
|
@ -384,7 +385,6 @@
|
|||
#define D_PARTICALS_BEYOND "Particals"
|
||||
|
||||
// sonoff_template.h
|
||||
// Max string length is 8 characters including suffixes
|
||||
#define D_SENSOR_NONE "-нет-"
|
||||
#define D_SENSOR_DHT11 "DHT11"
|
||||
#define D_SENSOR_AM2301 "AM2301"
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "数据大小:"
|
||||
#define D_ANALOG_INPUT "Analog"
|
||||
|
||||
#define D_FINGERPRINT "验证 TLS 指纹..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS 连接失败"
|
||||
#define D_RETRY_IN "重试倒计时:"
|
||||
#define D_VERIFIED "验证成功"
|
||||
#define D_INSECURE "指纹无效导致连接不安全"
|
||||
#define D_CONNECT_FAILED_TO "连接失败:"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Blocked Loop"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "如果预期响应，则启用Weblog 2"
|
||||
#define D_NEED_USER_AND_PASSWORD "需要 user=<用户名>&password=<密码>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "验证 TLS 指纹..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS 连接失败"
|
||||
#define D_RETRY_IN "重试倒计时:"
|
||||
#define D_VERIFIED "验证成功"
|
||||
#define D_INSECURE "指纹无效导致连接不安全"
|
||||
#define D_CONNECT_FAILED_TO "连接失败:"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "组播已禁用"
|
||||
#define D_MULTICAST_REJOINED "组播已(重新)加入"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "温度,湿度,气压"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "功率,电量"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "照度"
|
||||
#define D_DOMOTICZ_COUNT "数值"
|
||||
#define D_DOMOTICZ_VOLTAGE "电压"
|
||||
#define D_DOMOTICZ_CURRENT "电流"
|
||||
#define D_DOMOTICZ_COUNT "数值/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "电压/PM2.5"
|
||||
#define D_DOMOTICZ_CURRENT "电流/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "空气质量"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "更新计时器"
|
||||
|
||||
|
|
|
|||
|
|
@ -165,13 +165,6 @@
|
|||
#define D_DATA_SIZE "數據大小:"
|
||||
#define D_ANALOG_INPUT "Analog"
|
||||
|
||||
#define D_FINGERPRINT "驗證 TLS 指紋..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS 連接失敗"
|
||||
#define D_RETRY_IN "重試倒計時:"
|
||||
#define D_VERIFIED "驗證成功"
|
||||
#define D_INSECURE "指紋無效導致連接不安全"
|
||||
#define D_CONNECT_FAILED_TO "連接失敗:"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Blocked Loop"
|
||||
|
|
@ -320,6 +313,14 @@
|
|||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "如果預期響應，則啟用Weblog 2"
|
||||
#define D_NEED_USER_AND_PASSWORD "需要 user=<用戶名>&password=<密碼>"
|
||||
|
||||
// xdrv_00_mqtt.ino
|
||||
#define D_FINGERPRINT "驗證 TLS 指紋..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "TLS 連接失敗"
|
||||
#define D_RETRY_IN "重試倒計時:"
|
||||
#define D_VERIFIED "驗證成功"
|
||||
#define D_INSECURE "指紋無效導致連接不安全"
|
||||
#define D_CONNECT_FAILED_TO "連接失敗:"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "組播已禁用"
|
||||
#define D_MULTICAST_REJOINED "組播已(重新)加入"
|
||||
|
|
@ -351,9 +352,9 @@
|
|||
#define D_DOMOTICZ_TEMP_HUM_BARO "溫度,濕度,氣壓"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "功率,電量"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "照度"
|
||||
#define D_DOMOTICZ_COUNT "數值"
|
||||
#define D_DOMOTICZ_VOLTAGE "電壓"
|
||||
#define D_DOMOTICZ_CURRENT "電流"
|
||||
#define D_DOMOTICZ_COUNT "數值/PM1"
|
||||
#define D_DOMOTICZ_VOLTAGE "電壓/PM2.5"
|
||||
#define D_DOMOTICZ_CURRENT "電流/PM10"
|
||||
#define D_DOMOTICZ_AIRQUALITY "空氣品質"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "更新計時器"
|
||||
|
||||
|
|
|
|||
|
|
@ -336,11 +336,7 @@ boolean Ds18x20Read(uint8_t sensor, float &t)
|
|||
break;
|
||||
case MAX31850_CHIPID:
|
||||
temp14 = (data[1] << 8) + (data[0] & 0xFC);
|
||||
if (temp14 < 0) {
|
||||
temp14 = (~temp14) +1;
|
||||
sign = -1;
|
||||
}
|
||||
t = ConvertTemp(sign * temp14 * 0.0625); // Divide by 16
|
||||
t = ConvertTemp(temp14 * 0.0625); // Divide by 16
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -140,12 +140,8 @@ boolean Ds18x20Read(uint8_t sensor, float &t)
|
|||
t = ConvertTemp(sign * temp12 * 0.0625); // Divide by 16
|
||||
break;
|
||||
case MAX31850_CHIPID:
|
||||
temp14 = (data[1] << 8) + (data[0] & 0xFC);
|
||||
if (temp14 < 0) {
|
||||
temp14 = (~temp14) +1;
|
||||
sign = -1;
|
||||
}
|
||||
t = ConvertTemp(sign * temp14 * 0.0625); // Divide by 16
|
||||
temp14 = (data[1] << 8) + (data[0] & 0xFC);
|
||||
t = ConvertTemp(temp14 * 0.0625); // Divide by 16
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -130,6 +130,11 @@ void PmsShow(boolean json)
|
|||
pms_data.pm10_standard, pms_data.pm25_standard, pms_data.pm100_standard,
|
||||
pms_data.pm10_env, pms_data.pm25_env, pms_data.pm100_env,
|
||||
pms_data.particles_03um, pms_data.particles_05um, pms_data.particles_10um, pms_data.particles_25um, pms_data.particles_50um, pms_data.particles_100um);
|
||||
#ifdef USE_DOMOTICZ
|
||||
DomoticzSensor(DZ_COUNT, pms_data.pm10_env); // PM1
|
||||
DomoticzSensor(DZ_VOLTAGE, pms_data.pm25_env); // PM2.5
|
||||
DomoticzSensor(DZ_CURRENT, pms_data.pm100_env); // PM10
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_PMS5003_SNS, mqtt_data,
|
||||
|
|
|
|||
|
|
@ -107,6 +107,10 @@ void NovaSdsShow(boolean json)
|
|||
dtostrfd(pm2_5f, 1, pm2_5);
|
||||
if (json) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"SDS0X1\":{\"PM2.5\":%s,\"PM10\":%s}"), mqtt_data, pm2_5, pm10);
|
||||
#ifdef USE_DOMOTICZ
|
||||
DomoticzSensor(DZ_VOLTAGE, pm2_5); // PM2.5
|
||||
DomoticzSensor(DZ_CURRENT, pm10); // PM10
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SDS0X1_SNS, mqtt_data, pm2_5, pm10);
|
||||
|
|
|
|||
Loading…
Reference in New Issue