v4.0.1

4.0.1 20170305
* Fix char default sizes and set MESSZ to 360 (#143)
* Fix SerialLog setting status
* Disable syslog when emulation is active
* Add DS18B20 web page display refresh

README.md

@@ -1,7 +1,7 @@
 ## Sonoff-Tasmota
 Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
 
-Current version is **4.0.0** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
+Current version is **4.0.1** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
 
 - This version provides all (Sonoff) modules in one file and starts up with Sonoff Basic.
 - Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.

sonoff/_releasenotes.ino

@@ -1,4 +1,10 @@
-/* 4.0.0 20170303
+/* 4.0.1 20170305
+ * Fix char default sizes and set MESSZ to 360 (#143)
+ * Fix SerialLog setting status
+ * Disable syslog when emulation is active
+ * Add DS18B20 web page display refresh
+ *
+ * 4.0.0 20170303
  * Add define to remove config migration code for versions below 3.0 (See Wiki-Upgrade-Migration path)
  * Free memory by switching from String to char[]
  * Raised Sonoff Led PWM frequency from 200Hz to 432Hz in search of stability (hardware watchdog timeouts) (#122)

sonoff/sonoff.ino

@@ -12,9 +12,9 @@
 
 //#define ALLOW_MIGRATE_TO_V3
 #ifdef ALLOW_MIGRATE_TO_V3
-  #define VERSION              0x03091700   // 3.9.23
+  #define VERSION              0x03091800   // 3.9.24
 #else
-  #define VERSION              0x04000000   // 4.0.0
+  #define VERSION              0x04000100   // 4.0.1
 #endif  // ALLOW_MIGRATE_TO_V3
 
 enum log_t   {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL};
@@ -36,8 +36,6 @@ enum emul_t  {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX};
 \*********************************************************************************************/
 
 //#define USE_SPIFFS                          // Switch persistent configuration from flash to spiffs (+24k code, +0.6k mem)
-//#define BE_MINIMAL                          // Compile a minimal version if upgrade memory gets tight (-45k code, -2k mem)
-                                            // To be used as step 1. Next step is compile and use desired version
 
 /*********************************************************************************************\
  * No user configurable items below
@@ -52,9 +50,9 @@ enum emul_t  {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX};
 //#define DEBUG_THEO                          // Add debug code
 
 #ifdef BE_MINIMAL
-//#ifdef USE_MQTT_TLS
+#ifdef USE_MQTT_TLS
-//#undef USE_MQTT_TLS                       // Disable TLS support won't work as the MQTTHost is not set
+#undef USE_MQTT_TLS                         // Disable TLS support won't work as the MQTTHost is not set
-//#endif
+#endif
 #ifdef USE_DISCOVERY
 #undef USE_DISCOVERY                        // Disable Discovery services for both MQTT and web server
 #endif
@@ -145,10 +143,10 @@ enum butt_t {PRESSED, NOT_PRESSED};
 #include "support.h"                        // Global support
 #include <PubSubClient.h>                   // MQTT
 
-#define MESSZ                 352           // Max number of characters in JSON message string
+#define MESSZ                  360          // Max number of characters in JSON message string (4 x DS18x20 sensors)
-#if (MQTT_MAX_PACKET_SIZE -TOPSZ -60 -40) < MESSZ  // If the max message size is too small, throw an error at compile time
+#if (MQTT_MAX_PACKET_SIZE -TOPSZ -7) < MESSZ  // If the max message size is too small, throw an error at compile time
-                                            // 60 bytes for the IPv4 TCP header, 40 bytes to keep the original 400/240 headroom
+                                            // See pubsubclient.c line 359
-  #error "MQTT_MAX_PACKET_SIZE is too small in libraries/PubSubClient/src/PubSubClient.h, increase it to at least 512"
+  #error "MQTT_MAX_PACKET_SIZE is too small in libraries/PubSubClient/src/PubSubClient.h, increase it to at least 427"
 #endif
 
 #include <Ticker.h>                         // RTC
@@ -415,7 +413,7 @@ void json2legacy(char* stopic, char* svalue)
 
 void mqtt_publish_sec(const char* topic, const char* data, boolean retained)
 {
-  char log[TOPSZ+MESSZ];
+  char log[TOPSZ + MESSZ];
 
   if (sysCfg.mqtt_enabled) {
     if (mqttClient.publish(topic, data, retained)) {
@@ -459,7 +457,7 @@ void mqtt_publish_topic_P(uint8_t prefix, const char* subtopic, const char* data
 
 void mqtt_publishPowerState(byte device)
 {
-  char stopic[TOPSZ], svalue[MESSZ], sdevice[10];
+  char stopic[TOPSZ], sdevice[10], svalue[64];  // was MESSZ
 
   if ((device < 1) || (device > Maxdevice)) device = 1;
   snprintf_P(sdevice, sizeof(sdevice), PSTR("%d"), device);
@@ -473,7 +471,7 @@ void mqtt_publishPowerState(byte device)
 
 void mqtt_publishPowerBlinkState(byte device)
 {
-  char svalue[MESSZ], sdevice[10];
+  char sdevice[10], svalue[64];  // was MESSZ
 
   if ((device < 1) || (device > Maxdevice)) device = 1;
   snprintf_P(sdevice, sizeof(sdevice), PSTR("%d"), device);
@@ -484,7 +482,7 @@ void mqtt_publishPowerBlinkState(byte device)
 
 void mqtt_connected()
 {
-  char stopic[TOPSZ], svalue[MESSZ];
+  char stopic[TOPSZ], svalue[128];  // was MESSZ
 
   if (sysCfg.mqtt_enabled) {
 
@@ -596,7 +594,6 @@ void mqtt_reconnect()
 void mqttDataCb(char* topic, byte* data, unsigned int data_len)
 {
   char *str;
-  char svalue[MESSZ];
 
   if (!strcmp(SUB_PREFIX,PUB_PREFIX)) {
     str = strstr(topic,SUB_PREFIX);
@@ -606,10 +603,10 @@ void mqttDataCb(char* topic, byte* data, unsigned int data_len)
     }
   }
 
-  uint16_t i = 0, grpflg = 0, index;
+  char topicBuf[TOPSZ], dataBuf[data_len+1], dataBufUc[128], svalue[MESSZ];
-  char topicBuf[TOPSZ], dataBuf[data_len+1], dataBufUc[MESSZ];
   char *p, *mtopic = NULL, *type = NULL;
   char stemp1[TOPSZ], stemp2[10];
+  uint16_t i = 0, grpflg = 0, index;
 
   strncpy(topicBuf, topic, sizeof(topicBuf));
   memcpy(dataBuf, data, sizeof(dataBuf));
@@ -823,19 +820,16 @@ void mqttDataCb(char* topic, byte* data, unsigned int data_len)
         sysCfg.seriallog_level = payload;
         seriallog_level = payload;
         seriallog_timer = 0;
-        snprintf_P(svalue, sizeof(svalue), PSTR("{\"SerialLog\":%d}"), sysCfg.syslog_level);
       }
-      snprintf_P(svalue, sizeof(svalue), PSTR("{\"SerialLog\":\"%d (Setting %d)\"}"), seriallog_level, sysCfg.seriallog_level);
+      snprintf_P(svalue, sizeof(svalue), PSTR("{\"SerialLog\":\"%d (Active %d)\"}"), sysCfg.seriallog_level, seriallog_level);
     }
     else if (!strcmp(type,"SYSLOG")) {
       if ((data_len > 0) && (payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) {
         sysCfg.syslog_level = payload;
-        syslog_level = payload;
+        syslog_level = (sysCfg.emulation) ? 0 : payload;
         syslog_timer = 0;
-        snprintf_P(svalue, sizeof(svalue), PSTR("{\"SysLog\":%d}"), sysCfg.syslog_level);
-      } else {
-       snprintf_P(svalue, sizeof(svalue), PSTR("{\"SysLog\":\"%d (Setting %d)\"}"), syslog_level, sysCfg.syslog_level);
       }
+      snprintf_P(svalue, sizeof(svalue), PSTR("{\"SysLog\":\"%d (Active %d)\"}"), sysCfg.syslog_level, syslog_level);
     }
     else if (!strcmp(type,"LOGHOST")) {
       if ((data_len > 0) && (data_len < sizeof(sysCfg.syslog_host))) {
@@ -1507,7 +1501,7 @@ void every_second()
   if (syslog_timer) {  // Restore syslog level
     syslog_timer--;
     if (!syslog_timer) {
-      syslog_level = sysCfg.syslog_level;
+      syslog_level = (sysCfg.emulation) ? 0 : sysCfg.syslog_level;
       if (sysCfg.syslog_level) {
         addLog_P(LOG_LEVEL_INFO, PSTR("SYSL: Syslog logging re-enabled"));  // Might trigger disable again (on purpose)
       }
@@ -1591,7 +1585,7 @@ void every_second()
 void stateloop()
 {
   uint8_t button = NOT_PRESSED, flag, switchflag, power_now;
-  char scmnd[20], log[LOGSZ], svalue[MESSZ];
+  char scmnd[20], log[LOGSZ], svalue[80];  // was MESSZ
 
   timerxs = millis() + (1000 / STATES);
   state++;
@@ -2038,7 +2032,10 @@ void setup()
   savedatacounter = sysCfg.savedata;
   seriallog_timer = SERIALLOG_TIMER;
   seriallog_level = sysCfg.seriallog_level;
-  syslog_level = sysCfg.syslog_level;
+#ifndef USE_EMULATION
+  sysCfg.emulation = 0;
+#endif  // USE_EMULATION
+  syslog_level = (sysCfg.emulation) ? 0 : sysCfg.syslog_level;
   sleep = sysCfg.sleep;
 
   GPIO_init();

sonoff/support.ino

@@ -807,7 +807,7 @@ void rtc_init(rtcCallback cb)
 
 void syslog(const char *message)
 {
-  char str[TOPSZ+MESSZ];
+  char str[TOPSZ + MESSZ];
 
   if (portUDP.beginPacket(sysCfg.syslog_host, sysCfg.syslog_port)) {
     snprintf_P(str, sizeof(str), PSTR("%s ESP-%s"), Hostname, message);
@@ -835,12 +835,13 @@ void addLog(byte loglevel, const char *line)
     if (logidx > MAX_LOG_LINES -1) logidx = 0;
   }
 #endif  // USE_WEBSERVER
+//  if (sysCfg.emulation) return;  // Disable syslog (UDP) when emulation using UDP is selected
   if ((WiFi.status() == WL_CONNECTED) && (loglevel <= syslog_level)) syslog(line);
 }
 
 void addLog_P(byte loglevel, const char *formatP)
 {
-  char mess[MESSZ];
+  char mess[LOGSZ];  // was MESSZ
 
   snprintf_P(mess, sizeof(mess), formatP);
   addLog(loglevel, mess);

sonoff/user_config.h

@@ -126,7 +126,7 @@
 #define ENERGY_RESOLUTION      3                 // Maximum number of decimals (0 - 5) showing energy usage in kWh
 
 // -- Sensor code selection -----------------------
-//#define USE_DS18x20                              // Optional using OneWire library for multiple DS18B20 and/or DS18S20
+//#define USE_DS18x20                              // Optional using OneWire library for multiple DS18B20 and/or DS18S20 (+2k code)
 
 #define USE_I2C                                  // I2C using library wire (+10k code, 0.2k mem) - Disable by //
   #define USE_BH1750                             // Add I2C code for BH1750 sensor
@@ -140,6 +140,15 @@
 //  #define USE_WS2812_DMA                         // DMA supports only GPIO03 (= Serial TXD) (+1k mem)
                                                  //   When USE_WS2812_DMA is enabled expect Exceptions on Pow
 
+/*********************************************************************************************\
+ * Compile a minimal version if upgrade memory gets tight.
+ *   To be used as step 1 during upgrade. 
+ *   Step 2 is re-compile with option BE_MINIMAL commented out.
+ *   !!! Needed for next release of Arduino/ESP8266 (+22k code, +2k mem) !!!
+\*********************************************************************************************/
+
+//#define BE_MINIMAL                               // Minimal version if upgrade memory gets tight (-45k code, -2k mem)
+
 /*********************************************************************************************\
  * No user configurable items below
 \*********************************************************************************************/

sonoff/webserver.ino

@@ -423,11 +423,7 @@ void handleAjax2()
   if (pin[GPIO_DSB] < 99) tpage += dsb_webPresent();
 #endif  // USE_DS18B20
 #ifdef USE_DS18x20
-  if (pin[GPIO_DSB] < 99) {
+  if (pin[GPIO_DSB] < 99) tpage += ds18x20_webPresent();
-    tpage += ds18x20_webPresent();
-    ds18x20_search();      // Check for changes in sensors number
-    ds18x20_convert();     // Start Conversion, takes up to one second
-  }
 #endif  // USE_DS18x20
 #ifdef USE_DHT
   if (dht_type) tpage += dht_webPresent();
@@ -874,7 +870,7 @@ void handleReset()
 {
   if (httpUser()) return;
 
-  char svalue[MESSZ];
+  char svalue[16];  // was MESSZ
 
   addLog_P(LOG_LEVEL_DEBUG, PSTR("HTTP: Reset parameters"));
 
@@ -923,7 +919,7 @@ void handleUpgrade()
 void handleUpgradeStart()
 {
   if (httpUser()) return;
-  char svalue[MESSZ];
+  char svalue[16];  // was MESSZ
 
   addLog_P(LOG_LEVEL_DEBUG, PSTR("HTTP: Firmware upgrade start"));
   WIFI_configCounter();
@@ -1097,7 +1093,7 @@ void handleUploadLoop()
 void handleCmnd()
 {
   if (httpUser()) return;
-  char svalue[MESSZ];
+  char svalue[128];  // was MESSZ
 
   addLog_P(LOG_LEVEL_DEBUG, PSTR("HTTP: Handle cmnd"));
 
@@ -1166,7 +1162,7 @@ void handleConsole()
 void handleAjax()
 {
   if (httpUser()) return;
-  char svalue[MESSZ], log[LOGSZ];
+  char log[LOGSZ], svalue[128];  // was MESSZ
   byte cflg = 1, counter = 99;
 
   if (strlen(webServer->arg("c1").c_str())) {

sonoff/xdrv_domoticz.ino

@@ -42,7 +42,7 @@ byte domoticz_update_flag = 1;
 
 void mqtt_publishDomoticzPowerState(byte device)
 {
-  char svalue[MESSZ];
+  char svalue[64];  // was MESSZ
 
   if (sysCfg.domoticz_relay_idx[device -1] && (strlen(sysCfg.domoticz_in_topic) != 0)) {
     if ((device < 1) || (device > Maxdevice)) device = 1;
@@ -236,7 +236,7 @@ void domoticz_commands(char *svalue, uint16_t ssvalue)
 boolean domoticz_button(byte key, byte device, byte state, byte svalflg)
 {
   if ((sysCfg.domoticz_key_idx[device -1] || sysCfg.domoticz_switch_idx[device -1]) && (svalflg)) {
-    char svalue[MESSZ];
+    char svalue[80];  // was MESSZ
 
     snprintf_P(svalue, sizeof(svalue), PSTR("{\"command\":\"switchlight\",\"idx\":%d,\"switchcmd\":\"%s\"}"),
       (key) ? sysCfg.domoticz_switch_idx[device -1] : sysCfg.domoticz_key_idx[device -1], (state) ? (state == 2) ? "Toggle" : "On" : "Off");

sonoff/xdrv_snfled.ino

@@ -122,7 +122,8 @@ void sl_setPower(uint8_t power)
 
 void sl_animate()
 {
-  char svalue[MESSZ];
+// {"Wakeup":"Done"}
+  char svalue[32];  // was MESSZ
   uint8_t fadeValue;
   
   if ((sl_power == 0) || sl_blankv) {  // Power Off

sonoff/xsns_dht.ino

@@ -214,7 +214,7 @@ String dht_webPresent()
   float t, h;
   
   if (dht_readTempHum(TEMP_CONVERSION, t, h)) {     // Read temperature as Celsius (the default)
-    char stemp[10], sensor[128];
+    char stemp[10], sensor[80];
     dtostrf(t, 1, TEMP_RESOLUTION &3, stemp);
     snprintf_P(sensor, sizeof(sensor), HTTP_SNS_TEMP, dhtstype, stemp, (TEMP_CONVERSION) ? 'F' : 'C');
     page += sensor;

sonoff/xsns_ds18b20.ino

@@ -30,6 +30,8 @@ POSSIBILITY OF SUCH DAMAGE.
  * Source: Marinus vd Broek https://github.com/ESP8266nu/ESPEasy and AlexTransit (CRC)
 \*********************************************************************************************/
 
+float dsb_mt = 0;
+
 uint8_t dsb_reset()
 {
   uint8_t r;
@@ -131,11 +133,15 @@ boolean dsb_readTemp(bool S, float &t)
   int16_t DSTemp;
   byte msb, lsb, crc;
 
-  t = NAN;
+  if (!dsb_mt) {
+    t = NAN;
+  } else {
+    t = dsb_mt;
+  }
 
   if (!dsb_read_bit()) {     //check measurement end
     addLog_P(LOG_LEVEL_DEBUG, PSTR("DSB: Sensor busy"));
-    return false;
+    return !isnan(t);
   }
 /*
   dsb_reset();
@@ -165,6 +171,7 @@ boolean dsb_readTemp(bool S, float &t)
     t = (float(DSTemp) * 0.0625);
     if(S) t = dsb_convertCtoF(t);
   }
+  if (!isnan(t)) dsb_mt = t;
   return !isnan(t);
 }
 
@@ -177,7 +184,7 @@ void dsb_mqttPresent(char* svalue, uint16_t ssvalue, uint8_t* djson)
   char stemp1[10];
   float t;
 
-  if (dsb_readTemp(TEMP_CONVERSION, t)) {                 // Check if read failed
+  if (dsb_readTemp(TEMP_CONVERSION, t)) {  // Check if read failed
     dtostrf(t, 1, TEMP_RESOLUTION &3, stemp1);
     snprintf_P(svalue, ssvalue, PSTR("%s, \"DS18B20\":{\"Temperature\":%s}"), svalue, stemp1);
     *djson = 1;
@@ -194,12 +201,13 @@ String dsb_webPresent()
   String page = "";
   float st;
   
-  if (dsb_readTemp(TEMP_CONVERSION, st)) {        // Check if read failed
+  if (dsb_readTemp(TEMP_CONVERSION, st)) {  // Check if read failed
     char stemp[10], sensor[80];
     dtostrf(st, 1, TEMP_RESOLUTION &3, stemp);
     snprintf_P(sensor, sizeof(sensor), HTTP_SNS_TEMP, "DS18B20", stemp, (TEMP_CONVERSION) ? 'F' : 'C');
     page += sensor;
   }
+  dsb_readTempPrep();
   return page;
 }
 #endif  // USE_WEBSERVER

sonoff/xsns_ds18x20.ino

@@ -200,6 +200,8 @@ String ds18x20_webPresent()
       page += sensor;
     }
   }
+  ds18x20_search();      // Check for changes in sensors number
+  ds18x20_convert();     // Start Conversion, takes up to one second
   return page;
 }
 #endif  // USE_WEBSERVER

sonoff/xsns_hlw8012.ino

@@ -282,7 +282,7 @@ void hlw_setPowerSteadyCounter(byte value)
 
 void hlw_margin_chk()
 {
-  char log[LOGSZ], svalue[MESSZ];
+  char log[LOGSZ], svalue[200];  // was MESSZ
   float ped, pi, pc;
   uint16_t uped, piv, pe, pw, pu;
   byte flag, jsonflg;
@@ -543,7 +543,8 @@ void hlw_mqttStat(byte option, char* svalue, uint16_t ssvalue)
 
 void hlw_mqttPresent()
 {
-  char svalue[MESSZ];
+// {"Time":"2017-03-04T13:37:24", "Yesterday":0.013, "Today":0.000, "Period":0, "Power":0, "Factor":0.00, "Voltage":0, "Current":0.000}
+  char svalue[200];  // was MESSZ
 
   snprintf_P(svalue, sizeof(svalue), PSTR("{\"Time\":\"%04d-%02d-%02dT%02d:%02d:%02d\", "),
     rtcTime.Year, rtcTime.Month, rtcTime.Day, rtcTime.Hour, rtcTime.Minute, rtcTime.Second);

sonoff/xsns_htu21.ino

@@ -275,7 +275,7 @@ String htu_webPresent()
 {
   String page = "";
   if (htutype) {
-    char stemp[10], sensor[128];
+    char stemp[10], sensor[80];
 
     float t_htu21 = htu21_readTemperature(TEMP_CONVERSION);
     float h_htu21 = htu21_readHumidity();