mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #8709 from s-hadinger/zigbee_ezsp_initial 

Add Zigbee initial support for EmberZNet protocol
This commit is contained in:
Theo Arends 2020-06-16 21:15:37 +02:00 committed by GitHub
parent 87b0978922 bf6083ff1c
commit 4b092d132b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 391 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
tasmota/CHANGELOG.md
View File

@ -3,6 +3,7 @@
### 8.3.1.5 20200616
- Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3``
- Add Zigbee initial support for EmberZNet protocol (raw send/receive only)
### 8.3.1.4 20200615

4
tasmota/i18n.h
View File

@ -505,10 +505,14 @@
#define D_CMND_ZIGBEE_RESET "Reset"
#define D_JSON_ZIGBEE_CC2530 "CC2530"
#define D_CMND_ZIGBEEZNPRECEIVE "ZNPReceive" // only for debug
#define D_CMND_ZIGBEE_EZSP_RECEIVE "EZSPReceive" // only for debug
#define D_CMND_ZIGBEEZNPSEND "ZNPSend"
#define D_CMND_ZIGBEE_EZSP_SEND "EZSPSend"
#define D_JSON_ZIGBEE_STATE "ZbState"
#define D_JSON_ZIGBEEZNPRECEIVED "ZbZNPReceived"
#define D_JSON_ZIGBEE_EZSP_RECEIVED "ZbEZSPReceived"
#define D_JSON_ZIGBEEZNPSENT "ZbZNPSent"
#define D_JSON_ZIGBEE_EZSP_SENT "ZbEZSPSent"
#define D_JSON_ZIGBEEZCL_RECEIVED "ZbZCLReceived"
#define D_JSON_ZIGBEEZCL_RAW_RECEIVED "ZbZCLRawReceived"
#define D_JSON_ZIGBEE_DEVICE "Device"

3
tasmota/my_user_config.h
View File

@ -652,6 +652,9 @@
// -- Zigbee interface ----------------------------
//#define USE_ZIGBEE // Enable serial communication with Zigbee CC2530 flashed with ZNP (+49k code, +3k mem)
#define USE_ZIGBEE_ZNP // Enable ZNP protocol, needed for CC2530 based devices
// #define USE_ZIGBEE_EZSP // [EXPERIMENTAL - DO NOT USE] Enable EZSP protocol, needed for EFR32 EmberZNet based devices, like Sonoff Zigbee bridge
// Note: USE_ZIGBEE_ZNP and USE_ZIGBEE_EZSP are mutually incompatible, you must select exactly one
#define USE_ZIGBEE_PANID 0x1A63 // arbitrary PAN ID for Zigbee network, must be unique in the home
// if PANID == 0xFFFF, then the device will act as a Zigbee router, the parameters below are ignored
// if PANID == 0xFFFE, then the device will act as a Zigbee end-device (non-router), the parameters below are ignored

9
tasmota/xdrv_23_zigbee_0_constants.ino
View File

@ -19,6 +19,13 @@
#ifdef USE_ZIGBEE
#if defined(USE_ZIGBEE_ZNP) && defined(USE_ZIGBEE_EZSP)
#error "#define USE_ZIGBEE_ZNP and #define USE_ZIGBEE_EZSP are mutually incompatible"
#endif
#if !defined(USE_ZIGBEE_ZNP) && !defined(USE_ZIGBEE_EZSP)
#error "You must select one of: #define USE_ZIGBEE_ZNP or #define USE_ZIGBEE_EZSP"
#endif
#define OCCUPANCY "Occupancy" // global define for Aqara
typedef uint64_t Z_IEEEAddress;
@ -26,6 +33,7 @@ typedef uint16_t Z_ShortAddress;
const uint16_t BAD_SHORTADDR = 0xFFFE;
#ifdef USE_ZIGBEE_ZNP
enum ZnpCommandType {
Z_POLL = 0x00,
Z_SREQ = 0x20,
@ -45,6 +53,7 @@ enum ZnpSubsystem {
Z_DEBUG = 0x08,
Z_APP = 0x09
};
#endif // USE_ZIGBEE_ZNP
// Commands in the SYS subsystem
enum SysCommand {

28
tasmota/xdrv_23_zigbee_7_statemachine.ino
View File

@ -168,6 +168,8 @@ SBuffer *zigbee_buffer = nullptr;
#define USE_ZIGBEE_CHANNEL_MASK (1 << (USE_ZIGBEE_CHANNEL))
#ifdef USE_ZIGBEE_ZNP
// ZBS_* Zigbee Send
// ZBR_* Zigbee Recv
ZBM(ZBS_RESET, Z_AREQ | Z_SYS, SYS_RESET, 0x00 ) // 410001 SYS_RESET_REQ Hardware reset
@ -611,6 +613,30 @@ static const Zigbee_Instruction zb_prog[] PROGMEM = {
ZI_STOP(ZIGBEE_LABEL_ABORT)
};
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
// Update the relevant commands with Settings
void Z_UpdateConfig(uint8_t zb_channel, uint16_t zb_pan_id, uint64_t zb_ext_panid, uint64_t zb_precfgkey_l, uint64_t zb_precfgkey_h) {
}
static const Zigbee_Instruction zb_prog[] PROGMEM = {
ZI_LABEL(0)
ZI_NOOP()
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
ZI_ON_TIMEOUT_GOTO(ZIGBEE_LABEL_ABORT)
// ZI_ON_RECV_UNEXPECTED(&Z_Recv_Default)
// ZI_WAIT(10500) // wait for 10 seconds for Tasmota to stabilize
ZI_LABEL(ZIGBEE_LABEL_MAIN_LOOP)
ZI_WAIT_FOREVER()
ZI_GOTO(ZIGBEE_LABEL_READY)
};
#endif // USE_ZIGBEE_EZSP
uint8_t ZigbeeGetInstructionSize(uint8_t instr) { // in Zigbee_Instruction lines (words)
if (instr >= ZGB_INSTR_12_BYTES) {
return 3;
@ -770,7 +796,9 @@ void ZigbeeStateMachine_Run(void) {
}
break;
case ZGB_INSTR_SEND:
#ifdef USE_ZIGBEE_ZNP
ZigbeeZNPSend((uint8_t*) cur_ptr1, cur_d8 /* len */);
#endif // USE_ZIGBEE_ZNP
break;
case ZGB_INSTR_WAIT_UNTIL:
zigbee.recv_until = true; // and reuse ZGB_INSTR_WAIT_RECV

31
tasmota/xdrv_23_zigbee_8_parsers.ino
View File

@ -552,6 +552,7 @@ int32_t Z_MgmtBindRsp(int32_t res, const class SBuffer &buf) {
return -1;
}
#ifdef USE_ZIGBEE_ZNP
/*********************************************************************************************\
* Send specific ZNP messages
\*********************************************************************************************/
@ -589,6 +590,32 @@ void Z_SendAFInfoRequest(uint16_t shortaddr) {
ZigbeeZNPSend(AFInfoReq, sizeof(AFInfoReq));
}
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
/*********************************************************************************************\
* Send specific EZS¨ messages
\*********************************************************************************************/
//
// Send ZDO_IEEE_ADDR_REQ request to get IEEE long address
//
void Z_SendIEEEAddrReq(uint16_t shortaddr) {
}
//
// Send ACTIVE_EP_REQ to collect active endpoints for this address
//
void Z_SendActiveEpReq(uint16_t shortaddr) {
}
//
// Send AF Info Request
//
void Z_SendAFInfoRequest(uint16_t shortaddr) {
}
#endif // USE_ZIGBEE_EZSP
/*********************************************************************************************\
* Callbacks
@ -718,6 +745,8 @@ typedef struct Z_Dispatcher {
ZB_RecvMsgFunc func;
} Z_Dispatcher;
#ifdef USE_ZIGBEE_ZNP
// Ffilters based on ZNP frames
ZBM(AREQ_AF_DATA_CONFIRM, Z_AREQ | Z_AF, AF_DATA_CONFIRM) // 4480
ZBM(AREQ_AF_INCOMING_MESSAGE, Z_AREQ | Z_AF, AF_INCOMING_MSG) // 4481
@ -767,6 +796,8 @@ int32_t Z_Recv_Default(int32_t res, const class SBuffer &buf) {
}
}
#endif // USE_ZIGBEE_ZNP
/*********************************************************************************************\
* Functions called by State Machine
\*********************************************************************************************/

342
tasmota/xdrv_23_zigbee_9_impl.ino
View File

@ -21,18 +21,32 @@
#define XDRV_23 23
#ifdef USE_ZIGBEE_ZNP
const uint32_t ZIGBEE_BUFFER_SIZE = 256; // Max ZNP frame is SOF+LEN+CMD1+CMD2+250+FCS = 255
const uint8_t ZIGBEE_SOF = 0xFE;
const uint8_t ZIGBEE_SOF_ALT = 0xFF;
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
const uint32_t ZIGBEE_BUFFER_SIZE = 256;
const uint8_t ZIGBEE_EZSP_CANCEL = 0x1A; // cancel byte
const uint8_t ZIGBEE_EZSP_EOF = 0x7E; // end of frame
const uint8_t ZIGBEE_EZSP_ESCAPE = 0x7D; // escape byte
#endif // USE_ZIGBEE_EZSP
#include <TasmotaSerial.h>
TasmotaSerial *ZigbeeSerial = nullptr;
const char kZbCommands[] PROGMEM = D_PRFX_ZB "|" // prefix
D_CMND_ZIGBEEZNPSEND "|" D_CMND_ZIGBEE_PERMITJOIN "|"
D_CMND_ZIGBEE_STATUS "|" D_CMND_ZIGBEE_RESET "|" D_CMND_ZIGBEE_SEND "|"
D_CMND_ZIGBEE_PROBE "|" D_CMND_ZIGBEEZNPRECEIVE "|"
#ifdef USE_ZIGBEE_ZNP
D_CMND_ZIGBEEZNPSEND "|" D_CMND_ZIGBEEZNPRECEIVE "|"
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
D_CMND_ZIGBEE_EZSP_SEND "|" D_CMND_ZIGBEE_EZSP_RECEIVE "|"
#endif // USE_ZIGBEE_EZSP
D_CMND_ZIGBEE_PERMITJOIN "|"
D_CMND_ZIGBEE_STATUS "|" D_CMND_ZIGBEE_RESET "|" D_CMND_ZIGBEE_SEND "|" D_CMND_ZIGBEE_PROBE "|"
D_CMND_ZIGBEE_FORGET "|" D_CMND_ZIGBEE_SAVE "|" D_CMND_ZIGBEE_NAME "|"
D_CMND_ZIGBEE_BIND "|" D_CMND_ZIGBEE_UNBIND "|" D_CMND_ZIGBEE_PING "|" D_CMND_ZIGBEE_MODELID "|"
D_CMND_ZIGBEE_LIGHT "|" D_CMND_ZIGBEE_RESTORE "|" D_CMND_ZIGBEE_BIND_STATE "|"
@ -40,9 +54,14 @@ const char kZbCommands[] PROGMEM = D_PRFX_ZB "|" // prefix
;
void (* const ZigbeeCommand[])(void) PROGMEM = {
&CmndZbZNPSend, &CmndZbPermitJoin,
&CmndZbStatus, &CmndZbReset, &CmndZbSend,
&CmndZbProbe, &CmndZbZNPReceive,
#ifdef USE_ZIGBEE_ZNP
&CmndZbZNPSend, &CmndZbZNPReceive,
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
&CmndZbEZSPSend, &CmndZbEZSPReceive,
#endif // USE_ZIGBEE_EZSP
&CmndZbPermitJoin,
&CmndZbStatus, &CmndZbReset, &CmndZbSend, &CmndZbProbe,
&CmndZbForget, &CmndZbSave, &CmndZbName,
&CmndZbBind, &CmndZbUnbind, &CmndZbPing, &CmndZbModelId,
&CmndZbLight, &CmndZbRestore, &CmndZbBindState,
@ -52,11 +71,12 @@ void (* const ZigbeeCommand[])(void) PROGMEM = {
//
// Called at event loop, checks for incoming data from the CC2530
//
void ZigbeeInputLoop(void)
{
static uint32_t zigbee_polling_window = 0;
void ZigbeeInputLoop(void) {
#ifdef USE_ZIGBEE_ZNP
static uint32_t zigbee_polling_window = 0; // number of milliseconds since first byte
static uint8_t fcs = ZIGBEE_SOF;
static uint32_t zigbee_frame_len = 5; // minimal zigbee frame lenght, will be updated when buf[1] is read
static uint32_t zigbee_frame_len = 5; // minimal zigbee frame length, will be updated when buf[1] is read
// Receive only valid ZNP frames:
// 00 - SOF = 0xFE
// 01 - Length of Data Field - 0..250
@ -140,6 +160,127 @@ void ZigbeeInputLoop(void)
}
zigbee_buffer->setLen(0); // empty buffer
}
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
static uint32_t zigbee_polling_window = 0; // number of milliseconds since first byte
bool escape = false; // was the previous byte an escape?
bool frame_complete = false; // frame is ready and complete
// Receive only valid EZSP frames:
// 1A - Cancel - cancel all previous bytes
// 7D - Escape byte - following byte is escaped
// 7E - end of frame
while (ZigbeeSerial->available()) {
yield();
uint8_t zigbee_in_byte = ZigbeeSerial->read();
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZIG: ZbInput byte=0x%02X len=%d"), zigbee_in_byte, zigbee_buffer->len());
// if (0 == zigbee_buffer->len()) { // make sure all variables are correctly initialized
// escape = false;
// frame_complete = false;
// }
if ((0x11 == zigbee_in_byte) || (0x13 == zigbee_in_byte)) {
continue; // ignore reserved bytes XON/XOFF
}
if (ZIGBEE_EZSP_ESCAPE == zigbee_in_byte) {
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZIG: Escape byte received"));
escape = true;
continue;
}
if (ZIGBEE_EZSP_CANCEL == zigbee_in_byte) {
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZIG: ZbInput byte=0x1A, cancel byte received, discarding %d bytes"), zigbee_buffer->len());
zigbee_buffer->setLen(0); // empty buffer
escape = false;
frame_complete = false;
continue; // re-loop
}
if (ZIGBEE_EZSP_EOF == zigbee_in_byte) {
// end of frame
frame_complete = true;
break;
}
if (zigbee_buffer->len() < ZIGBEE_BUFFER_SIZE) {
if (escape) {
// invert bit 5
zigbee_in_byte ^= 0x20;
escape = false;
}
zigbee_buffer->add8(zigbee_in_byte);
zigbee_polling_window = millis(); // Wait for more data
} // adding bytes
} // while (ZigbeeSerial->available())
uint32_t frame_len = zigbee_buffer->len();
if (frame_complete || (frame_len && (millis() > (zigbee_polling_window + ZIGBEE_POLLING)))) {
char hex_char[frame_len * 2 + 2];
ToHex_P((unsigned char*)zigbee_buffer->getBuffer(), zigbee_buffer->len(), hex_char, sizeof(hex_char));
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR(D_LOG_ZIGBEE "Bytes follow_read_metric = %0d"), ZigbeeSerial->getLoopReadMetric());
if ((frame_complete) && (frame_len >= 3)) {
// frame received and has at least 3 bytes (without EOF), checking CRC
// AddLog_P2(LOG_LEVEL_INFO, PSTR(D_JSON_ZIGBEE_EZSP_RECEIVED ": received raw frame %s"), hex_char);
uint16_t crc = 0xFFFF; // frame CRC
// compute CRC
for (uint32_t i=0; i<frame_len-2; i++) {
crc = crc ^ ((uint16_t)zigbee_buffer->get8(i) << 8);
for (uint32_t i=0; i<8; i++) {
if (crc & 0x8000) {
crc = (crc << 1) ^ 0x1021; // polynom is x^16 + x^12 + x^5 + 1, CCITT standard
} else {
crc <<= 1;
}
}
}
uint16_t crc_received = zigbee_buffer->get8(frame_len - 2) << 8 | zigbee_buffer->get8(frame_len - 1);
// remove 2 last bytes
if (crc_received != crc) {
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_JSON_ZIGBEE_EZSP_RECEIVED ": bad crc (received 0x%04X, computed 0x%04X) %s"), crc_received, crc, hex_char);
} else {
// copy buffer
SBuffer ezsp_buffer = zigbee_buffer->subBuffer(0, frame_len - 2); // CRC
// CRC is correct, apply de-stuffing if DATA frame
if (0 == (ezsp_buffer.get8(0) & 0x80)) {
// DATA frame
uint8_t rand = 0x42;
for (uint32_t i=1; i<ezsp_buffer.len(); i++) {
ezsp_buffer.set8(i, ezsp_buffer.get8(i) ^ rand);
if (rand & 1) { rand = (rand >> 1) ^ 0xB8; }
else { rand = (rand >> 1); }
}
}
ToHex_P((unsigned char*)ezsp_buffer.getBuffer(), ezsp_buffer.len(), hex_char, sizeof(hex_char));
Response_P(PSTR("{\"" D_JSON_ZIGBEE_EZSP_RECEIVED "\":\"%s\"}"), hex_char);
if (Settings.flag3.tuya_serial_mqtt_publish) {
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR));
XdrvRulesProcess();
} else {
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE "%s"), mqtt_data); // TODO move to LOG_LEVEL_DEBUG when stable
}
// now process the message
ZigbeeProcessInput(ezsp_buffer);
}
} else {
// the buffer timed-out, print error and discard
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_JSON_ZIGBEE_EZSP_RECEIVED ": time-out, discarding %s, %d"), hex_char);
}
zigbee_buffer->setLen(0); // empty buffer
escape = false;
frame_complete = false;
}
#endif // USE_ZIGBEE_EZSP
}
/********************************************************************************************/
@ -201,15 +342,20 @@ uint32_t strToUInt(const JsonVariant &val) {
return 0; // couldn't parse anything
}
#ifdef USE_ZIGBEE_ZNP
// Do a factory reset of the CC2530
const unsigned char ZIGBEE_FACTORY_RESET[] PROGMEM =
{ Z_SREQ | Z_SAPI, SAPI_WRITE_CONFIGURATION, CONF_STARTUP_OPTION, 0x01 /* len */, 0x01 /* STARTOPT_CLEAR_CONFIG */};
//"2605030101"; // Z_SREQ | Z_SAPI, SAPI_WRITE_CONFIGURATION, CONF_STARTUP_OPTION, 0x01 len, 0x01 STARTOPT_CLEAR_CONFIG
#endif // USE_ZIGBEE_ZNP
void CmndZbReset(void) {
if (ZigbeeSerial) {
switch (XdrvMailbox.payload) {
case 1:
#ifdef USE_ZIGBEE_ZNP
ZigbeeZNPSend(ZIGBEE_FACTORY_RESET, sizeof(ZIGBEE_FACTORY_RESET));
#endif // USE_ZIGBEE_ZNP
eraseZigbeeDevices();
restart_flag = 2;
ResponseCmndChar_P(PSTR(D_JSON_ZIGBEE_CC2530 " " D_JSON_RESET_AND_RESTARTING));
@ -220,6 +366,38 @@ void CmndZbReset(void) {
}
}
#ifdef USE_ZIGBEE_ZNP
void ZigbeeZNPSend(const uint8_t *msg, size_t len) {
if ((len < 2) || (len > 252)) {
// abort, message cannot be less than 2 bytes for CMD1 and CMD2
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_JSON_ZIGBEEZNPSENT ": bad message len %d"), len);
return;
}
uint8_t data_len = len - 2; // removing CMD1 and CMD2
if (ZigbeeSerial) {
uint8_t fcs = data_len;
ZigbeeSerial->write(ZIGBEE_SOF); // 0xFE
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend SOF %02X"), ZIGBEE_SOF);
ZigbeeSerial->write(data_len);
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend LEN %02X"), data_len);
for (uint32_t i = 0; i < len; i++) {
uint8_t b = pgm_read_byte(msg + i);
ZigbeeSerial->write(b);
fcs ^= b;
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend byt %02X"), b);
}
ZigbeeSerial->write(fcs); // finally send fcs checksum byte
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend FCS %02X"), fcs);
}
// Now send a MQTT message to report the sent message
char hex_char[(len * 2) + 2];
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_ZIGBEE D_JSON_ZIGBEEZNPSENT " %s"),
ToHex_P(msg, len, hex_char, sizeof(hex_char)));
}
//
// Same code for `ZbZNPSend` and `ZbZNPReceive`
// building the complete message (intro, length)
@ -264,36 +442,138 @@ void CmndZbZNPSend(void)
CmndZbZNPSendOrReceive(true);
}
void ZigbeeZNPSend(const uint8_t *msg, size_t len) {
if ((len < 2) || (len > 252)) {
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
// internal function to output a byte, and escape it (stuffing) if needed
void ZigbeeEZSPSend_Out(uint8_t out_byte) {
switch (out_byte) {
case 0x7E: // Flag byte
case 0x11: // XON
case 0x13: // XOFF
case 0x18: // Substitute byte
case 0x1A: // Cancel byte
case 0x7D: // Escape byte
ZigbeeSerial->write(ZIGBEE_EZSP_ESCAPE); // send Escape byte 0x7D
ZigbeeSerial->write(out_byte ^ 0x20); // send with bit 5 inverted
break;
default:
ZigbeeSerial->write(out_byte); // send unchanged
break;
}
}
// Send low-level EZSP frames
//
// The frame should contain the Control Byte and Data Field
// The frame shouldn't be escaped, nor randomized
//
// Before sending:
// - send Cancel byte (0x1A) if requested
// - randomize Data Field if DATA Frame
// - compute CRC16
// - escape (stuff) reserved bytes
// - add EOF (0x7E)
// - send frame
// send_cancel: should we first send a EZSP_CANCEL (0x1A) before the message to clear any leftover
void ZigbeeEZSPSend(const uint8_t *msg, size_t len, bool send_cancel = false) {
if ((len < 1) || (len > 252)) {
// abort, message cannot be less than 2 bytes for CMD1 and CMD2
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_JSON_ZIGBEEZNPSENT ": bad message len %d"), len);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_JSON_ZIGBEE_EZSP_SENT ": bad message len %d"), len);
return;
}
uint8_t data_len = len - 2; // removing CMD1 and CMD2
if (ZigbeeSerial) {
uint8_t fcs = data_len;
if (send_cancel) {
ZigbeeSerial->write(ZIGBEE_EZSP_CANCEL); // 0x1A
}
ZigbeeSerial->write(ZIGBEE_SOF); // 0xFE
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend SOF %02X"), ZIGBEE_SOF);
ZigbeeSerial->write(data_len);
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend LEN %02X"), data_len);
for (uint32_t i = 0; i < len; i++) {
uint8_t b = pgm_read_byte(msg + i);
ZigbeeSerial->write(b);
fcs ^= b;
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend byt %02X"), b);
}
ZigbeeSerial->write(fcs); // finally send fcs checksum byte
//AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ZNPSend FCS %02X"), fcs);
bool data_frame = (0 == (msg[0] & 0x80));
uint8_t rand = 0x42; // pseudo-randomizer initial value
uint16_t crc = 0xFFFF; // CRC16 CCITT initialization
for (uint32_t i=0; i<len; i++) {
uint8_t out_byte = msg[i];
// apply randomization if DATA field
if (data_frame && (i > 0)) {
out_byte ^= rand;
if (rand & 1) { rand = (rand >> 1) ^ 0xB8; }
else { rand = (rand >> 1); }
}
// compute CRC
crc = crc ^ ((uint16_t)out_byte << 8);
for (uint32_t i=0; i<8; i++) {
if (crc & 0x8000) {
crc = (crc << 1) ^ 0x1021; // polynom is x^16 + x^12 + x^5 + 1, CCITT standard
} else {
crc <<= 1;
}
}
// output byte
ZigbeeEZSPSend_Out(out_byte);
}
// send CRC16 in big-endian
ZigbeeEZSPSend_Out(crc >> 8);
ZigbeeEZSPSend_Out(crc & 0xFF);
// finally send End of Frame
ZigbeeSerial->write(ZIGBEE_EZSP_EOF); // 0x1A
}
// Now send a MQTT message to report the sent message
char hex_char[(len * 2) + 2];
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_ZIGBEE D_JSON_ZIGBEEZNPSENT " %s"),
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_ZIGBEE D_JSON_ZIGBEE_EZSP_SENT " %s"),
ToHex_P(msg, len, hex_char, sizeof(hex_char)));
}
//
// Same code for `ZbZNPSend` and `ZbZNPReceive`
// building the complete message (intro, length)
//
void CmndZbEZSPSendOrReceive(bool send)
{
if (ZigbeeSerial && (XdrvMailbox.data_len > 0)) {
uint8_t code;
char *codes = RemoveSpace(XdrvMailbox.data);
int32_t size = strlen(XdrvMailbox.data);
SBuffer buf((size+1)/2);
while (size > 1) {
char stemp[3];
strlcpy(stemp, codes, sizeof(stemp));
code = strtol(stemp, nullptr, 16);
buf.add8(code);
size -= 2;
codes += 2;
}
if (send) {
// Command was `ZbEZSPSend`
ZigbeeEZSPSend(buf.getBuffer(), buf.len());
} else {
// Command was `ZbEZSPReceive`
ZigbeeProcessInput(buf);
}
}
ResponseCmndDone();
}
// For debug purposes only, simulates a message received
void CmndZbEZSPReceive(void)
{
CmndZbEZSPSendOrReceive(false);
}
void CmndZbEZSPSend(void)
{
CmndZbEZSPSendOrReceive(true);
}
#endif // USE_ZIGBEE_EZSP
//
// Internal function, send the low-level frame
// Input:
@ -311,6 +591,7 @@ void ZigbeeZNPSend(const uint8_t *msg, size_t len) {
//
void ZigbeeZCLSend_Raw(uint16_t shortaddr, uint16_t groupaddr, uint16_t clusterId, uint8_t endpoint, uint8_t cmdId, bool clusterSpecific, uint16_t manuf, const uint8_t *msg, size_t len, bool needResponse, uint8_t transacId) {
#ifdef USE_ZIGBEE_ZNP
SBuffer buf(32+len);
buf.add8(Z_SREQ | Z_AF); // 24
buf.add8(AF_DATA_REQUEST_EXT); // 02
@ -342,6 +623,7 @@ void ZigbeeZCLSend_Raw(uint16_t shortaddr, uint16_t groupaddr, uint16_t clusterI
}
ZigbeeZNPSend(buf.getBuffer(), buf.len());
#endif // USE_ZIGBEE_ZNP
}
/********************************************************************************************/
@ -914,6 +1196,7 @@ void ZbBindUnbind(bool unbind) { // false = bind, true = unbind
if (&to_group && dstLongAddr) { ResponseCmndChar_P(PSTR("Cannot have both \"ToDevice\" and \"ToGroup\"")); return; }
if (!&to_group && !dstLongAddr) { ResponseCmndChar_P(PSTR("Missing \"ToDevice\" or \"ToGroup\"")); return; }
#ifdef USE_ZIGBEE_ZNP
SBuffer buf(34);
buf.add8(Z_SREQ | Z_ZDO);
if (unbind) {
@ -935,6 +1218,7 @@ void ZbBindUnbind(bool unbind) { // false = bind, true = unbind
}
ZigbeeZNPSend(buf.getBuffer(), buf.len());
#endif // USE_ZIGBEE_ZNP
ResponseCmndDone();
}
@ -961,6 +1245,7 @@ void CmndZbBindState(void) {
uint16_t shortaddr = zigbee_devices.parseDeviceParam(XdrvMailbox.data);
if (BAD_SHORTADDR == shortaddr) { ResponseCmndChar_P(PSTR("Unknown device")); return; }
#ifdef USE_ZIGBEE_ZNP
SBuffer buf(10);
buf.add8(Z_SREQ | Z_ZDO); // 25
buf.add8(ZDO_MGMT_BIND_REQ); // 33
@ -968,6 +1253,7 @@ void CmndZbBindState(void) {
buf.add8(0); // StartIndex = 0
ZigbeeZNPSend(buf.getBuffer(), buf.len());
#endif // USE_ZIGBEE_ZNP
ResponseCmndDone();
}
@ -1191,6 +1477,7 @@ void CmndZbPermitJoin(void) {
duration = 0xFF; // unlimited time
}
#ifdef USE_ZIGBEE_ZNP
SBuffer buf(34);
buf.add8(Z_SREQ | Z_ZDO); // 25
buf.add8(ZDO_MGMT_PERMIT_JOIN_REQ); // 36
@ -1200,6 +1487,7 @@ void CmndZbPermitJoin(void) {
buf.add8(0x00); // TCSignificance
ZigbeeZNPSend(buf.getBuffer(), buf.len());
#endif // USE_ZIGBEE_ZNP
ResponseCmndDone();
}