Change setting hostname to fixing ArduinoESP32 core 2.0.0

CHANGELOG.md

@@ -14,6 +14,7 @@ All notable changes to this project will be documented in this file.
 - ESP32 Ethernet Phy Type information to IDF v3+
 - Allow buttons to work in AP normal mode (#12518)
 - Enable Ping and rule features for any device compiled with more than 1M flash size (#12539)
+- Setting hostname to fixing ArduinoESP32 core 2.0.0
 
 ### Fixed
 - ESP32-C3 settings layout for configuration backup and restore

RELEASENOTES.md

@@ -97,6 +97,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmo
 
 ## Changelog v9.5.0.2
 ### Added
+- Command ``SetOption127 1`` to force Wifi in no-sleep mode even if ``Sleep 0`` is not enabled
 - Initial support for Tasmota Mesh (TasMesh) providing node/broker communication using ESP-NOW [#11939](https://github.com/arendst/Tasmota/issues/11939)
 - Berry ESP32 partition manager [#12465](https://github.com/arendst/Tasmota/issues/12465)
 - Support for AM2320 Temperature and Humidity Sensor by Lars Wessels [#12485](https://github.com/arendst/Tasmota/issues/12485)
@@ -108,6 +109,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmo
 - ESP32 Ethernet Phy Type information to IDF v3+
 - Speed up initial GUI console refresh
 - Enable UFILESYS, GUI_TRASH_FILE and GUI_EDIT_FILE for any device compiled with more than 1M flash size
+- Setting hostname to fixing ArduinoESP32 core 2.0.0
 - Simplified configuration for ir-full and removal of tasmota-ircustom [#12428](https://github.com/arendst/Tasmota/issues/12428)
 - Refactor platformio [#12442](https://github.com/arendst/Tasmota/issues/12442)
 - Allow buttons to work in AP normal mode [#12518](https://github.com/arendst/Tasmota/issues/12518)

tasmota/settings.h

@@ -156,7 +156,7 @@ typedef union {                            // Restricted by MISRA-C Rule 18.4 bu
     uint32_t wiegand_keypad_to_tag : 1;    // bit 10 (v9.3.1.1)  - SetOption124 - (Wiegand) send key pad stroke as single char (0) or one tag (ending char #) (1)
     uint32_t zigbee_hide_bridge_topic : 1; // bit 11 (v9.3.1.1)  - SetOption125 - (Zigbee) Hide bridge topic from zigbee topic (use with SetOption89) (1)
     uint32_t ds18x20_mean : 1;             // bit 12 (v9.3.1.2)  - SetOption126 - (DS18x20) Enable arithmetic mean over teleperiod for JSON temperature (1)
-    uint32_t wifi_no_sleep : 1;            // bit 13 (v9.5.0.2)  - SetOption127 - (Wifi) keep wifi in no-sleep mode, prevents some occasional unresponsiveness
+    uint32_t wifi_no_sleep : 1;            // bit 13 (v9.5.0.2)  - SetOption127 - (Wifi) Keep wifi in no-sleep mode, prevents some occasional unresponsiveness
     uint32_t spare14 : 1;                  // bit 14
     uint32_t spare15 : 1;                  // bit 15
     uint32_t spare16 : 1;                  // bit 16

tasmota/support_wifi.ino

@@ -112,11 +112,12 @@ void WifiConfig(uint8_t type)
   }
 }
 
-void WifiSetMode(WiFiMode_t wifi_mode)
-{
+void WifiSetMode(WiFiMode_t wifi_mode) {
   if (WiFi.getMode() == wifi_mode) { return; }
 
   if (wifi_mode != WIFI_OFF) {
+    WiFi.hostname(TasmotaGlobal.hostname);  // Set hostname before WiFi.mode as needed for ESP32 core 2.0.0
+
     // See: https://github.com/esp8266/Arduino/issues/6172#issuecomment-500457407
     WiFi.forceSleepWake(); // Make sure WiFi is really active.
     delay(100);
@@ -161,7 +162,7 @@ void WiFiSetSleepMode(void)
 */
   bool wifi_no_sleep = Settings->flag5.wifi_no_sleep;
 #ifdef CONFIG_IDF_TARGET_ESP32C3
-  wifi_no_sleep = true;             // temporary patch for IDF4.4, wifi sleeping may cause wifi drops
+  wifi_no_sleep = true;                         // Temporary patch for IDF4.4, wifi sleeping may cause wifi drops
 #endif
   if (0 == TasmotaGlobal.sleep || wifi_no_sleep) {
     if (!TasmotaGlobal.wifi_stay_asleep) {
@@ -186,8 +187,7 @@ void WifiBegin(uint8_t flag, uint8_t channel)
   WiFi.persistent(false);   // Solve possible wifi init errors (re-add at 6.2.1.16 #4044, #4083)
   WiFi.disconnect(true);    // Delete SDK wifi config
   delay(200);
-//  WiFi.mode(WIFI_STA);      // Disable AP mode
-  WifiSetMode(WIFI_STA);
+  WifiSetMode(WIFI_STA);    // Disable AP mode
   WiFiSetSleepMode();
 //  if (WiFi.getPhyMode() != WIFI_PHY_MODE_11N) { WiFi.setPhyMode(WIFI_PHY_MODE_11N); }  // B/G/N
 //  if (WiFi.getPhyMode() != WIFI_PHY_MODE_11G) { WiFi.setPhyMode(WIFI_PHY_MODE_11G); }  // B/G
@@ -207,7 +207,6 @@ void WifiBegin(uint8_t flag, uint8_t channel)
   if (Settings->ipv4_address[0]) {
     WiFi.config(Settings->ipv4_address[0], Settings->ipv4_address[1], Settings->ipv4_address[2], Settings->ipv4_address[3]);  // Set static IP
   }
-  WiFi.hostname(TasmotaGlobal.hostname);
 
   char stemp[40] = { 0 };
   if (channel) {

tasmota/xdrv_01_webserver.ino

@@ -594,11 +594,9 @@ void WifiManagerBegin(bool reset_only)
   // setup AP
   if (!Web.initial_config) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_WCFG_2_WIFIMANAGER " " D_ACTIVE_FOR_3_MINUTES)); }
   if (!TasmotaGlobal.global_state.wifi_down) {
-//    WiFi.mode(WIFI_AP_STA);
     WifiSetMode(WIFI_AP_STA);
     AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION));
   } else {
-//    WiFi.mode(WIFI_AP);
     WifiSetMode(WIFI_AP);
     AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_WIFIMANAGER_SET_ACCESSPOINT));
   }

tools/decode-status.py

@@ -181,7 +181,8 @@ a_setoption = [[
     "(Wiegand) send key pad stroke as single char (0) or one tag (ending char #) (1)",
     "(Zigbee) Hide bridge topic from zigbee topic (use with SetOption89) (1)",
     "(DS18x20) Enable arithmetic mean over teleperiod for JSON temperature (1)",
-    "","","",
+    "(Wifi) Keep wifi in no-sleep mode, prevents some occasional unresponsiveness",
+    "","",
     "","","","",
     "","","","",
     "","","","",