Bump version to 8.5.0.1

RELEASENOTES.md

@@ -53,29 +53,4 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 
 ## Changelog
 
-### Version 8.4.0.3
+### Version 8.5.0.1
-
-- Remove support for direct upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
-- Change references from http://thehackbox.org/tasmota/ to http://ota.tasmota.com/tasmota/
-- Change triple-mode TLS via configuration in a single firmware (TLS AWS IoT, Letsencrypt and No-TLS)
-- Change White blend mode to using command ``SetOption 105`` instead of ``RGBWWTable``
-- Fix ESP32 PWM range
-- Fix display power control (#9114)
-- Add command ``SetOption102 0/1`` to set Baud rate for Teleinfo communication (0 = 1200 or 1 = 9600)
-- Add command ``SetOption103 0/1`` to set TLS mode when TLS is selected
-- Add command ``SetOption104 1`` to disable all MQTT retained messages
-- Add command ``SetOption106 1`` to create a virtual White ColorTemp for RGBW lights
-- Add command ``SetOption107 0/1`` to select virtual White as (0) Warm or (1) Cold
-- Add command ``SetOption108 0/1`` to enable Teleinfo telemetry into Tasmota Energy MQTT (0) or Teleinfo only (1)
-- Add command ``SetOption109 1`` to force gen1 Alexa mode, for Echo Dot 2nd gen devices only
-- Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046)
-- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134)
-- Add Zigbee options to ``ZbSend`` ``Config`` and ``ReadCondig``
-- Add Zigbee better support for IKEA Motion Sensor
-- Add Zigbee web gui widget for Battery and Temp/Humidity/Pressure sensors
-- Add Zigbee web ui for power metering plugs
-- Add better configuration corruption recovery (#9046)
-- Add virtual CT for 4 channels lights, emulating a 5th channel
-- Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)
-- Add ESP32 Analog input support for GPIO32 to GPIO39
-- Add experimental support for ESP32 TTGO Watch and I2S Audio by Gerhard Mutz

tasmota/CHANGELOG.md

@@ -1,5 +1,15 @@
+## Released
+
 ## Unreleased (development)
 
+### 8.5.0.1 20200907
+
+- New released
+
+### 8.5.0 20200907
+
+- Release Hannah
+
 ### 8.4.0.3 20200823
 
 - Change references from http://thehackbox.org/tasmota/ to http://ota.tasmota.com/tasmota/
@@ -14,6 +24,10 @@
 - Remove support for direct upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
 - Change White blend mode moved to using ``SetOption 105`` instead of ``RGBWWTable``
 - Fix display power control (#9114)
+- Add command ``SetOption103 0/1`` to set TLS mode when TLS is selected
+- Add command ``SetOption104 1`` to disable all MQTT retained messages
+- Add command ``SetOption106 1`` to create a virtual White ColorTemp for RGBW lights
+- Add command ``SetOption107 0/1`` to select virtual White as (0) Warm or (1) Cold
 - Add command ``SetOption108 0/1`` to enable Teleinfo telemetry into Tasmota Energy MQTT (0) or Teleinfo only (1) - Add better config corruption recovery (#9046)
 - Add virtual CT for 4 channels lights, emulating a 5th channel
 - Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)

tasmota/tasmota_version.h

@@ -20,7 +20,7 @@
 #ifndef _TASMOTA_VERSION_H_
 #define _TASMOTA_VERSION_H_
 
-const uint32_t VERSION = 0x08040003;
+const uint32_t VERSION = 0x08050001;
 
 // Lowest compatible version
 const uint32_t VERSION_COMPATIBLE = 0x07010006;