mirror of https://github.com/arendst/Tasmota.git
v5.12.0f - Add BRG support
5.12.0f * Add support for WS2812 BRG led configuration to be defined as NEO_BRG in user_config.h (#1690)
This commit is contained in:
Theo Arends
parent
3e7142f2a4
commit
55c43ded0e
|
|
@ -1,7 +1,7 @@
|
|||
## Sonoff-Tasmota
|
||||
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
|
||||
|
||||
Current version is **5.12.0e** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
Current version is **5.12.0f** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
|
||||
### ATTENTION All versions
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,7 @@
|
|||
/* 5.12.0e
|
||||
/* 5.12.0f
|
||||
* Add support for WS2812 BRG led configuration to be defined as NEO_BRG in user_config.h (#1690)
|
||||
*
|
||||
* 5.12.0e
|
||||
* Add Domoticz dust (custom) sensors to PMS5003 and NovaFitness SDS drivers as PM1, PM2.5 and PM10
|
||||
* Add a second TLS fingerprint to allow switching keys in TLS mode (#2033, #2102)
|
||||
* Add display of remaining pulse time to command PulseTime (#2085)
|
||||
|
|
|
|||
|
|
@ -509,7 +509,7 @@ void SettingsDefaultSet2()
|
|||
// Settings.domoticz_switch_idx[i] = 0;
|
||||
}
|
||||
|
||||
Settings.energy_power_delta = 80;
|
||||
Settings.energy_power_delta = DEFAULT_POWER_DELTA;
|
||||
Settings.energy_power_calibration = HLW_PREF_PULSE;
|
||||
Settings.energy_voltage_calibration = HLW_UREF_PULSE;
|
||||
Settings.energy_current_calibration = HLW_IREF_PULSE;
|
||||
|
|
@ -890,7 +890,7 @@ void SettingsDelta()
|
|||
}
|
||||
if (Settings.version < 0x050C0005) {
|
||||
Settings.light_rotation = 0;
|
||||
Settings.energy_power_delta = 80;
|
||||
Settings.energy_power_delta = DEFAULT_POWER_DELTA;
|
||||
char fingerprint[60];
|
||||
memcpy(fingerprint, Settings.mqtt_fingerprint, sizeof(fingerprint));
|
||||
char *p = fingerprint;
|
||||
|
|
|
|||
|
|
@ -107,6 +107,18 @@ typedef unsigned long power_t; // Power (Relay) type
|
|||
#define max(a,b) ((a)>(b)?(a):(b))
|
||||
*/
|
||||
|
||||
//enum ws2812NeopixelbusFeature { NEO_RGB, NEO_GRB, NEO_BRG, NEO_4LED, NEO_RGBW, NEO_GRBW }; // Doesn't work
|
||||
#define NEO_RGB 0 // Neopixel RGB leds
|
||||
#define NEO_GRB 1 // Neopixel GRB leds
|
||||
#define NEO_BRG 2 // Neopixel BRG leds
|
||||
#define NEO_4LED 3 // Placeholder to test for 4 led types
|
||||
#define NEO_RGBW 4 // Neopixel RGBW leds
|
||||
#define NEO_GRBW 5 // Neopixel GRBW leds
|
||||
|
||||
#define MQTT_PUBSUBCLIENT 1 // Mqtt PubSubClient library
|
||||
#define MQTT_TASMOTAMQTT 2 // Mqtt TasmotaMqtt library based on esp-mqtt-arduino
|
||||
#define MQTT_ESPMQTTARDUINO 3 // Mqtt esp-mqtt-arduino library by Ingo Randolf
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Enumeration
|
||||
\*********************************************************************************************/
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@
|
|||
- Select IDE Tools - Flash Size: "1M (no SPIFFS)"
|
||||
====================================================*/
|
||||
|
||||
#define VERSION 0x050C0005 // 5.12.0e
|
||||
#define VERSION 0x050C0006 // 5.12.0f
|
||||
|
||||
// Location specific includes
|
||||
#include <core_version.h> // Arduino_Esp8266 version information (ARDUINO_ESP8266_RELEASE and ARDUINO_ESP8266_RELEASE_2_3_0)
|
||||
|
|
|
|||
|
|
@ -68,7 +68,7 @@ void WifiWpsStatusCallback(wps_cb_status status);
|
|||
#define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
|
||||
#define USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
|
||||
#ifndef USE_WS2812_CTYPE
|
||||
#define USE_WS2812_CTYPE 1 // WS2812 Color type (0 - RGB, 1 - GRB, 2 - RGBW, 3 - GRBW)
|
||||
#define USE_WS2812_CTYPE NEO_GRB // WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RGBW, NEO_GRBW)
|
||||
#endif
|
||||
// #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow
|
||||
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
||||
|
|
|
|||
|
|
@ -78,11 +78,11 @@
|
|||
* Select ONE of possible MQTT library types below
|
||||
\*********************************************************************************************/
|
||||
// Default MQTT driver for both non-TLS and TLS connections. Blocks network if MQTT server is unavailable.
|
||||
#define MQTT_LIBRARY_TYPE 1 // Use PubSubClient library
|
||||
#define MQTT_LIBRARY_TYPE MQTT_PUBSUBCLIENT // Use PubSubClient library
|
||||
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
|
||||
//#define MQTT_LIBRARY_TYPE 2 // Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only
|
||||
//#define MQTT_LIBRARY_TYPE MQTT_TASMOTAMQTT // Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only
|
||||
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
|
||||
//#define MQTT_LIBRARY_TYPE 3 // Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only
|
||||
//#define MQTT_LIBRARY_TYPE MQTT_ESPMQTTARDUINO // Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only
|
||||
|
||||
// -- MQTT ----------------------------------------
|
||||
#define MQTT_USE 1 // [SetOption3] Select default MQTT use (0 = Off, 1 = On)
|
||||
|
|
@ -227,7 +227,7 @@
|
|||
#define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
|
||||
|
||||
#define USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
|
||||
#define USE_WS2812_CTYPE 1 // WS2812 Color type (0 - RGB, 1 - GRB, 2 - RGBW, 3 - GRBW)
|
||||
#define USE_WS2812_CTYPE NEO_GRB // WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RGBW, NEO_GRBW)
|
||||
// #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow
|
||||
|
||||
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
||||
|
|
|
|||
|
|
@ -18,23 +18,23 @@
|
|||
*/
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Select ONE of possible MQTT libraries below
|
||||
* Select ONE of possible MQTT library types below
|
||||
\*********************************************************************************************/
|
||||
// Default MQTT driver for both non-TLS and TLS connections. Blocks network if MQTT server is unavailable.
|
||||
//#define MQTT_LIBRARY_TYPE 1 // Use PubSubClient library
|
||||
//#define MQTT_LIBRARY_TYPE MQTT_PUBSUBCLIENT // Use PubSubClient library
|
||||
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
|
||||
//#define MQTT_LIBRARY_TYPE 2 // Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only
|
||||
//#define MQTT_LIBRARY_TYPE MQTT_TASMOTAMQTT // Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only
|
||||
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
|
||||
//#define MQTT_LIBRARY_TYPE 3 // Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only
|
||||
//#define MQTT_LIBRARY_TYPE MQTT_ESPMQTTARDUINO // Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only
|
||||
|
||||
#ifdef USE_MQTT_TLS
|
||||
#ifdef MQTT_LIBRARY_TYPE
|
||||
#undef MQTT_LIBRARY_TYPE
|
||||
#endif
|
||||
#define MQTT_LIBRARY_TYPE 1 // Use PubSubClient library as it only supports TLS
|
||||
#define MQTT_LIBRARY_TYPE MQTT_PUBSUBCLIENT // Use PubSubClient library as it only supports TLS
|
||||
#else
|
||||
#ifndef MQTT_LIBRARY_TYPE
|
||||
#define MQTT_LIBRARY_TYPE 1 // Use PubSubClient library as default
|
||||
#define MQTT_LIBRARY_TYPE MQTT_PUBSUBCLIENT // Use PubSubClient library as default
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -63,7 +63,7 @@ bool mqtt_connected = false; // MQTT virtual connection status
|
|||
* void MqttLoop()
|
||||
\*********************************************************************************************/
|
||||
|
||||
#if (1 == MQTT_LIBRARY_TYPE) /*****************************************************************/
|
||||
#if (MQTT_LIBRARY_TYPE == MQTT_PUBSUBCLIENT) /***********************************************/
|
||||
|
||||
#include <PubSubClient.h>
|
||||
|
||||
|
|
@ -100,7 +100,7 @@ void MqttLoop()
|
|||
MqttClient.loop();
|
||||
}
|
||||
|
||||
#elif (2 == MQTT_LIBRARY_TYPE) /*****************************************************************/
|
||||
#elif (MQTT_LIBRARY_TYPE == MQTT_TASMOTAMQTT) /**********************************************/
|
||||
|
||||
#include <TasmotaMqtt.h>
|
||||
TasmotaMqtt MqttClient;
|
||||
|
|
@ -134,7 +134,7 @@ void MqttLoop()
|
|||
{
|
||||
}
|
||||
|
||||
#elif (3 == MQTT_LIBRARY_TYPE) /***************************************************************/
|
||||
#elif (MQTT_LIBRARY_TYPE == MQTT_ESPMQTTARDUINO) /*******************************************/
|
||||
|
||||
#include <MQTT.h>
|
||||
MQTT *MqttClient = NULL;
|
||||
|
|
@ -450,14 +450,14 @@ void MqttReconnect()
|
|||
if (!MqttCheckTls()) return;
|
||||
#endif // USE_MQTT_TLS
|
||||
|
||||
#if (2 == MQTT_LIBRARY_TYPE)
|
||||
#if (MQTT_LIBRARY_TYPE == MQTT_TASMOTAMQTT)
|
||||
MqttClient.InitConnection(Settings.mqtt_host, Settings.mqtt_port);
|
||||
MqttClient.InitClient(mqtt_client, mqtt_user, mqtt_pwd, MQTT_KEEPALIVE);
|
||||
MqttClient.InitLWT(stopic, mqtt_data, 1, true);
|
||||
MqttClient.OnConnected(MqttConnected);
|
||||
MqttClient.OnDisconnected(MqttDisconnectedCb);
|
||||
MqttClient.OnData(MqttDataHandler);
|
||||
#elif (3 == MQTT_LIBRARY_TYPE)
|
||||
#elif (MQTT_LIBRARY_TYPE == MQTT_ESPMQTTARDUINO)
|
||||
MqttClient = new MQTT(mqtt_client, Settings.mqtt_host, Settings.mqtt_port, stopic, 1, true, mqtt_data);
|
||||
MqttClient->setUserPwd(mqtt_user, mqtt_pwd);
|
||||
MqttClient->onConnected(MqttConnected);
|
||||
|
|
@ -468,7 +468,7 @@ void MqttReconnect()
|
|||
mqtt_initial_connection_state = 1;
|
||||
}
|
||||
|
||||
#if (1 == MQTT_LIBRARY_TYPE)
|
||||
#if (MQTT_LIBRARY_TYPE == MQTT_PUBSUBCLIENT)
|
||||
MqttClient.setCallback(MqttDataHandler);
|
||||
MqttClient.setServer(Settings.mqtt_host, Settings.mqtt_port);
|
||||
if (MqttClient.connect(mqtt_client, mqtt_user, mqtt_pwd, stopic, 1, true, mqtt_data)) {
|
||||
|
|
@ -476,9 +476,9 @@ void MqttReconnect()
|
|||
} else {
|
||||
MqttDisconnected(MqttClient.state()); // status codes are documented here http://pubsubclient.knolleary.net/api.html#state
|
||||
}
|
||||
#elif (2 == MQTT_LIBRARY_TYPE)
|
||||
#elif (MQTT_LIBRARY_TYPE == MQTT_TASMOTAMQTT)
|
||||
MqttClient.Connect();
|
||||
#elif (3 == MQTT_LIBRARY_TYPE)
|
||||
#elif (MQTT_LIBRARY_TYPE == MQTT_ESPMQTTARDUINO)
|
||||
MqttClient->connect();
|
||||
#endif // MQTT_LIBRARY_TYPE
|
||||
}
|
||||
|
|
|
|||
|
|
@ -376,7 +376,7 @@ void LightInit()
|
|||
}
|
||||
#ifdef USE_WS2812 // ************************************************************************
|
||||
else if (LT_WS2812 == light_type) {
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
light_subtype++; // from RGB to RGBW
|
||||
#endif
|
||||
Ws2812Init();
|
||||
|
|
|
|||
|
|
@ -25,21 +25,25 @@
|
|||
#include <NeoPixelBus.h>
|
||||
|
||||
#ifdef USE_WS2812_DMA
|
||||
#if (USE_WS2812_CTYPE == 1)
|
||||
#if (USE_WS2812_CTYPE == NEO_GRB)
|
||||
NeoPixelBus<NeoGrbFeature, Neo800KbpsMethod> *strip = NULL;
|
||||
#elif (USE_WS2812_CTYPE == 2)
|
||||
#elif (USE_WS2812_CTYPE == NEO_BRG)
|
||||
NeoPixelBus<NeoBrgFeature, Neo800KbpsMethod> *strip = NULL;
|
||||
#elif (USE_WS2812_CTYPE == NEO_RGBW)
|
||||
NeoPixelBus<NeoRgbwFeature, Neo800KbpsMethod> *strip = NULL;
|
||||
#elif (USE_WS2812_CTYPE == 3)
|
||||
#elif (USE_WS2812_CTYPE == NEO_GRBW)
|
||||
NeoPixelBus<NeoGrbwFeature, Neo800KbpsMethod> *strip = NULL;
|
||||
#else // USE_WS2812_CTYPE
|
||||
NeoPixelBus<NeoRgbFeature, Neo800KbpsMethod> *strip = NULL;
|
||||
#endif // USE_WS2812_CTYPE
|
||||
#else // USE_WS2812_DMA
|
||||
#if (USE_WS2812_CTYPE == 1)
|
||||
#if (USE_WS2812_CTYPE == NEO_GRB)
|
||||
NeoPixelBus<NeoGrbFeature, NeoEsp8266BitBang800KbpsMethod> *strip = NULL;
|
||||
#elif (USE_WS2812_CTYPE == 2)
|
||||
#elif (USE_WS2812_CTYPE == NEO_BRG)
|
||||
NeoPixelBus<NeoBrgFeature, NeoEsp8266BitBang800KbpsMethod> *strip = NULL;
|
||||
#elif (USE_WS2812_CTYPE == NEO_RGBW)
|
||||
NeoPixelBus<NeoRgbwFeature, NeoEsp8266BitBang800KbpsMethod> *strip = NULL;
|
||||
#elif (USE_WS2812_CTYPE == 3)
|
||||
#elif (USE_WS2812_CTYPE == NEO_GRBW)
|
||||
NeoPixelBus<NeoGrbwFeature, NeoEsp8266BitBang800KbpsMethod> *strip = NULL;
|
||||
#else // USE_WS2812_CTYPE
|
||||
NeoPixelBus<NeoRgbFeature, NeoEsp8266BitBang800KbpsMethod> *strip = NULL;
|
||||
|
|
@ -90,7 +94,7 @@ uint8_t ws_show_next = 1;
|
|||
|
||||
void Ws2812StripShow()
|
||||
{
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
RgbwColor c;
|
||||
#else
|
||||
RgbColor c;
|
||||
|
|
@ -102,7 +106,7 @@ void Ws2812StripShow()
|
|||
c.R = ledTable[c.R];
|
||||
c.G = ledTable[c.G];
|
||||
c.B = ledTable[c.B];
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
c.W = ledTable[c.W];
|
||||
#endif
|
||||
strip->SetPixelColor(i, c);
|
||||
|
|
@ -122,7 +126,7 @@ int mod(int a, int b)
|
|||
|
||||
void Ws2812UpdatePixelColor(int position, struct WsColor hand_color, float offset)
|
||||
{
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
RgbwColor color;
|
||||
#else
|
||||
RgbColor color;
|
||||
|
|
@ -205,7 +209,7 @@ void Ws2812Gradient(uint8_t schemenr)
|
|||
* Display a gradient of colors for the current color scheme.
|
||||
* Repeat is the number of repetitions of the gradient (pick a multiple of 2 for smooth looping of the gradient).
|
||||
*/
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
RgbwColor c;
|
||||
c.W = 0;
|
||||
#else
|
||||
|
|
@ -253,7 +257,7 @@ void Ws2812Bars(uint8_t schemenr)
|
|||
* Display solid bars of color for the current color scheme.
|
||||
* Width is the width of each bar in pixels/lights.
|
||||
*/
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
RgbwColor c;
|
||||
c.W = 0;
|
||||
#else
|
||||
|
|
@ -298,21 +302,25 @@ void Ws2812Bars(uint8_t schemenr)
|
|||
void Ws2812Init()
|
||||
{
|
||||
#ifdef USE_WS2812_DMA
|
||||
#if (USE_WS2812_CTYPE == 1)
|
||||
#if (USE_WS2812_CTYPE == NEO_GRB)
|
||||
strip = new NeoPixelBus<NeoGrbFeature, Neo800KbpsMethod>(WS2812_MAX_LEDS); // For Esp8266, the Pin is omitted and it uses GPIO3 due to DMA hardware use.
|
||||
#elif (USE_WS2812_CTYPE == 2)
|
||||
#elif (USE_WS2812_CTYPE == NEO_BRG)
|
||||
strip = new NeoPixelBus<NeoBrgFeature, Neo800KbpsMethod>(WS2812_MAX_LEDS); // For Esp8266, the Pin is omitted and it uses GPIO3 due to DMA hardware use.
|
||||
#elif (USE_WS2812_CTYPE == NEO_RGBW)
|
||||
strip = new NeoPixelBus<NeoRgbwFeature, Neo800KbpsMethod>(WS2812_MAX_LEDS); // For Esp8266, the Pin is omitted and it uses GPIO3 due to DMA hardware use.
|
||||
#elif (USE_WS2812_CTYPE == 3)
|
||||
#elif (USE_WS2812_CTYPE == NEO_GRBW)
|
||||
strip = new NeoPixelBus<NeoGrbwFeature, Neo800KbpsMethod>(WS2812_MAX_LEDS); // For Esp8266, the Pin is omitted and it uses GPIO3 due to DMA hardware use.
|
||||
#else // USE_WS2812_CTYPE
|
||||
strip = new NeoPixelBus<NeoRgbFeature, Neo800KbpsMethod>(WS2812_MAX_LEDS); // For Esp8266, the Pin is omitted and it uses GPIO3 due to DMA hardware use.
|
||||
#endif // USE_WS2812_CTYPE
|
||||
#else // USE_WS2812_DMA
|
||||
#if (USE_WS2812_CTYPE == 1)
|
||||
#if (USE_WS2812_CTYPE == NEO_GRB)
|
||||
strip = new NeoPixelBus<NeoGrbFeature, NeoEsp8266BitBang800KbpsMethod>(WS2812_MAX_LEDS, pin[GPIO_WS2812]);
|
||||
#elif (USE_WS2812_CTYPE == 2)
|
||||
#elif (USE_WS2812_CTYPE == NEO_BRG)
|
||||
strip = new NeoPixelBus<NeoBrgFeature, NeoEsp8266BitBang800KbpsMethod>(WS2812_MAX_LEDS, pin[GPIO_WS2812]);
|
||||
#elif (USE_WS2812_CTYPE == NEO_RGBW)
|
||||
strip = new NeoPixelBus<NeoRgbwFeature, NeoEsp8266BitBang800KbpsMethod>(WS2812_MAX_LEDS, pin[GPIO_WS2812]);
|
||||
#elif (USE_WS2812_CTYPE == 3)
|
||||
#elif (USE_WS2812_CTYPE == NEO_GRBW)
|
||||
strip = new NeoPixelBus<NeoGrbwFeature, NeoEsp8266BitBang800KbpsMethod>(WS2812_MAX_LEDS, pin[GPIO_WS2812]);
|
||||
#else // USE_WS2812_CTYPE
|
||||
strip = new NeoPixelBus<NeoRgbFeature, NeoEsp8266BitBang800KbpsMethod>(WS2812_MAX_LEDS, pin[GPIO_WS2812]);
|
||||
|
|
@ -331,7 +339,7 @@ void Ws2812Clear()
|
|||
|
||||
void Ws2812SetColor(uint16_t led, uint8_t red, uint8_t green, uint8_t blue, uint8_t white)
|
||||
{
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
RgbwColor lcolor;
|
||||
lcolor.W = white;
|
||||
#else
|
||||
|
|
@ -357,7 +365,7 @@ char* Ws2812GetColor(uint16_t led, char* scolor)
|
|||
{
|
||||
uint8_t sl_ledcolor[4];
|
||||
|
||||
#if (USE_WS2812_CTYPE > 1)
|
||||
#if (USE_WS2812_CTYPE > NEO_4LED)
|
||||
RgbwColor lcolor = strip->GetPixelColor(led -1);
|
||||
sl_ledcolor[3] = lcolor.W;
|
||||
#else
|
||||
|
|
|
|||
Loading…
Reference in New Issue