mirror of https://github.com/arendst/Tasmota.git
Fix for SPG30 Abs Humidity Not Shown on Web UI
This commit is contained in:
peteakalad
parent
a5a7988532
commit
615645e50e
|
|
@ -1,46 +0,0 @@
|
|||
Thank you for opening an issue on an Adafruit Arduino library repository. To
|
||||
improve the speed of resolution please review the following guidelines and
|
||||
common troubleshooting steps below before creating the issue:
|
||||
|
||||
- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use
|
||||
the forums at http://forums.adafruit.com to ask questions and troubleshoot why
|
||||
something isn't working as expected. In many cases the problem is a common issue
|
||||
that you will more quickly receive help from the forum community. GitHub issues
|
||||
are meant for known defects in the code. If you don't know if there is a defect
|
||||
in the code then start with troubleshooting on the forum first.
|
||||
|
||||
- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
|
||||
check all of the steps and commands to run have been followed. Consult the
|
||||
forum if you're unsure or have questions about steps in a guide/tutorial.
|
||||
|
||||
- **For Arduino projects check these very common issues to ensure they don't apply**:
|
||||
|
||||
- For uploading sketches or communicating with the board make sure you're using
|
||||
a **USB data cable** and **not** a **USB charge-only cable**. It is sometimes
|
||||
very hard to tell the difference between a data and charge cable! Try using the
|
||||
cable with other devices or swapping to another cable to confirm it is not
|
||||
the problem.
|
||||
|
||||
- **Be sure you are supplying adequate power to the board.** Check the specs of
|
||||
your board and plug in an external power supply. In many cases just
|
||||
plugging a board into your computer is not enough to power it and other
|
||||
peripherals.
|
||||
|
||||
- **Double check all soldering joints and connections.** Flakey connections
|
||||
cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
|
||||
|
||||
- **Ensure you are using an official Arduino or Adafruit board.** We can't
|
||||
guarantee a clone board will have the same functionality and work as expected
|
||||
with this code and don't support them.
|
||||
|
||||
If you're sure this issue is a defect in the code and checked the steps above
|
||||
please fill in the following fields to provide enough troubleshooting information.
|
||||
You may delete the guideline and text above to just leave the following details:
|
||||
|
||||
- Arduino board: **INSERT ARDUINO BOARD NAME/TYPE HERE**
|
||||
|
||||
- Arduino IDE version (found in Arduino -> About Arduino menu): **INSERT ARDUINO
|
||||
VERSION HERE**
|
||||
|
||||
- List the steps to reproduce the problem below (if possible attach a sketch or
|
||||
copy the sketch code in too): **LIST REPRO STEPS BELOW**
|
||||
|
|
@ -1,26 +0,0 @@
|
|||
Thank you for creating a pull request to contribute to Adafruit's GitHub code!
|
||||
Before you open the request please review the following guidelines and tips to
|
||||
help it be more easily integrated:
|
||||
|
||||
- **Describe the scope of your change--i.e. what the change does and what parts
|
||||
of the code were modified.** This will help us understand any risks of integrating
|
||||
the code.
|
||||
|
||||
- **Describe any known limitations with your change.** For example if the change
|
||||
doesn't apply to a supported platform of the library please mention it.
|
||||
|
||||
- **Please run any tests or examples that can exercise your modified code.** We
|
||||
strive to not break users of the code and running tests/examples helps with this
|
||||
process.
|
||||
|
||||
Thank you again for contributing! We will try to test and integrate the change
|
||||
as soon as we can, but be aware we have many GitHub repositories to manage and
|
||||
can't immediately respond to every request. There is no need to bump or check in
|
||||
on a pull request (it will clutter the discussion of the request).
|
||||
|
||||
Also don't be worried if the request is closed or not integrated--sometimes the
|
||||
priorities of Adafruit's GitHub code (education, ease of use) might not match the
|
||||
priorities of the pull request. Don't fret, the open source community thrives on
|
||||
forks and GitHub makes it easy to keep your changes in a forked repo.
|
||||
|
||||
After reviewing the guidelines above you can delete this text from the pull request.
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
*~
|
||||
Doxyfile*
|
||||
doxygen_sqlite3.db
|
||||
html
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
language: c
|
||||
sudo: false
|
||||
|
||||
# Blacklist
|
||||
branches:
|
||||
except:
|
||||
- gh-pages
|
||||
|
||||
env:
|
||||
global:
|
||||
- PRETTYNAME="Adafruit SGP30 Arduino Library"
|
||||
# Optional, will default to "$TRAVIS_BUILD_DIR/Doxyfile"
|
||||
# - DOXYFILE: $TRAVIS_BUILD_DIR/Doxyfile
|
||||
|
||||
before_install:
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/install.sh)
|
||||
|
||||
#install:
|
||||
# - arduino --install-library "Adafruit ILI9341","Adafruit GFX Library"
|
||||
|
||||
script:
|
||||
- build_main_platforms
|
||||
|
||||
# Generate and deploy documentation
|
||||
after_success:
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/library_check.sh)
|
||||
- source <(curl -SLs https://raw.githubusercontent.com/adafruit/travis-ci-arduino/master/doxy_gen_and_deploy.sh)
|
||||
|
|
@ -1,267 +0,0 @@
|
|||
/*!
|
||||
* @file Adafruit_SGP30.cpp
|
||||
*
|
||||
* @mainpage Adafruit SGP30 gas sensor driver
|
||||
*
|
||||
* @section intro_sec Introduction
|
||||
*
|
||||
* This is the documentation for Adafruit's SGP30 driver for the
|
||||
* Arduino platform. It is designed specifically to work with the
|
||||
* Adafruit SGP30 breakout: http://www.adafruit.com/products/3709
|
||||
*
|
||||
* These sensors use I2C to communicate, 2 pins (SCL+SDA) are required
|
||||
* to interface with the breakout.
|
||||
*
|
||||
* Adafruit invests time and resources providing this open source code,
|
||||
* please support Adafruit and open-source hardware by purchasing
|
||||
* products from Adafruit!
|
||||
*
|
||||
*
|
||||
* @section author Author
|
||||
* Written by Ladyada for Adafruit Industries.
|
||||
*
|
||||
* @section license License
|
||||
* BSD license, all text here must be included in any redistribution.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
#if ARDUINO >= 100
|
||||
#include "Arduino.h"
|
||||
#else
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#include "Adafruit_SGP30.h"
|
||||
|
||||
//#define I2C_DEBUG
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief Instantiates a new SGP30 class
|
||||
*/
|
||||
/**************************************************************************/
|
||||
Adafruit_SGP30::Adafruit_SGP30() {
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief Setups the hardware and detects a valid SGP30. Initializes I2C
|
||||
then reads the serialnumber and checks that we are talking to an SGP30
|
||||
@param theWire Optional pointer to I2C interface, otherwise use Wire
|
||||
@returns True if SGP30 found on I2C, False if something went wrong!
|
||||
*/
|
||||
/**************************************************************************/
|
||||
boolean Adafruit_SGP30::begin(TwoWire *theWire) {
|
||||
_i2caddr = SGP30_I2CADDR_DEFAULT;
|
||||
if (theWire == NULL) {
|
||||
_i2c = &Wire;
|
||||
} else {
|
||||
_i2c = theWire;
|
||||
}
|
||||
|
||||
// assume i2c initialized already to avoid resetting clock stretching
|
||||
// _i2c->begin();
|
||||
|
||||
|
||||
uint8_t command[2];
|
||||
command[0] = 0x36;
|
||||
command[1] = 0x82;
|
||||
if (! readWordFromCommand(command, 2, 10, serialnumber, 3))
|
||||
return false;
|
||||
|
||||
uint16_t featureset;
|
||||
command[0] = 0x20;
|
||||
command[1] = 0x2F;
|
||||
if (! readWordFromCommand(command, 2, 10, &featureset, 1))
|
||||
return false;
|
||||
//Serial.print("Featureset 0x"); Serial.println(featureset, HEX);
|
||||
if (featureset != SGP30_FEATURESET)
|
||||
return false;
|
||||
if (! IAQinit())
|
||||
return false;
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief Commands the sensor to begin the IAQ algorithm. Must be called after startup.
|
||||
@returns True if command completed successfully, false if something went wrong!
|
||||
*/
|
||||
/**************************************************************************/
|
||||
boolean Adafruit_SGP30::IAQinit(void) {
|
||||
uint8_t command[2];
|
||||
command[0] = 0x20;
|
||||
command[1] = 0x03;
|
||||
return readWordFromCommand(command, 2, 10);
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief Commands the sensor to take a single eCO2/VOC measurement. Places results in {@link TVOC} and {@link eCO2}
|
||||
@returns True if command completed successfully, false if something went wrong!
|
||||
*/
|
||||
/**************************************************************************/
|
||||
boolean Adafruit_SGP30::IAQmeasure(void) {
|
||||
uint8_t command[2];
|
||||
command[0] = 0x20;
|
||||
command[1] = 0x08;
|
||||
uint16_t reply[2];
|
||||
if (! readWordFromCommand(command, 2, 12, reply, 2))
|
||||
return false;
|
||||
TVOC = reply[1];
|
||||
eCO2 = reply[0];
|
||||
return true;
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief Request baseline calibration values for both CO2 and TVOC IAQ calculations. Places results in parameter memory locaitons.
|
||||
@param eco2_base A pointer to a uint16_t which we will save the calibration value to
|
||||
@param tvoc_base A pointer to a uint16_t which we will save the calibration value to
|
||||
@returns True if command completed successfully, false if something went wrong!
|
||||
*/
|
||||
/**************************************************************************/
|
||||
boolean Adafruit_SGP30::getIAQBaseline(uint16_t *eco2_base, uint16_t *tvoc_base) {
|
||||
uint8_t command[2];
|
||||
command[0] = 0x20;
|
||||
command[1] = 0x15;
|
||||
uint16_t reply[2];
|
||||
if (! readWordFromCommand(command, 2, 10, reply, 2))
|
||||
return false;
|
||||
*eco2_base = reply[0];
|
||||
*tvoc_base = reply[1];
|
||||
return true;
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief Assign baseline calibration values for both CO2 and TVOC IAQ calculations.
|
||||
@param eco2_base A uint16_t which we will save the calibration value from
|
||||
@param tvoc_base A uint16_t which we will save the calibration value from
|
||||
@returns True if command completed successfully, false if something went wrong!
|
||||
*/
|
||||
/**************************************************************************/
|
||||
boolean Adafruit_SGP30::setIAQBaseline(uint16_t eco2_base, uint16_t tvoc_base) {
|
||||
uint8_t command[8];
|
||||
command[0] = 0x20;
|
||||
command[1] = 0x1e;
|
||||
command[2] = tvoc_base >> 8;
|
||||
command[3] = tvoc_base & 0xFF;
|
||||
command[4] = generateCRC(command+2, 2);
|
||||
command[5] = eco2_base >> 8;
|
||||
command[6] = eco2_base & 0xFF;
|
||||
command[7] = generateCRC(command+5, 2);
|
||||
|
||||
return readWordFromCommand(command, 8, 10);
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief Set the absolute humidity value [mg/m^3] for compensation to increase precision of TVOC and eCO2.
|
||||
@param absolute_humidity A uint32_t [mg/m^3] which we will be used for compensation. If the absolute humidity is set to zero, humidity compensation will be disabled.
|
||||
@returns True if command completed successfully, false if something went wrong!
|
||||
*/
|
||||
/**************************************************************************/
|
||||
boolean Adafruit_SGP30::setHumidity(uint32_t absolute_humidity) {
|
||||
if (absolute_humidity > 256000) {
|
||||
return false;
|
||||
}
|
||||
|
||||
uint16_t ah_scaled = (uint16_t)(((uint64_t)absolute_humidity * 256 * 16777) >> 24);
|
||||
uint8_t command[5];
|
||||
command[0] = 0x20;
|
||||
command[1] = 0x61;
|
||||
command[2] = ah_scaled >> 8;
|
||||
command[3] = ah_scaled & 0xFF;
|
||||
command[4] = generateCRC(command+2, 2);
|
||||
|
||||
return readWordFromCommand(command, 5, 10);
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@brief I2C low level interfacing
|
||||
*/
|
||||
/**************************************************************************/
|
||||
|
||||
|
||||
boolean Adafruit_SGP30::readWordFromCommand(uint8_t command[], uint8_t commandLength, uint16_t delayms, uint16_t *readdata, uint8_t readlen)
|
||||
{
|
||||
uint8_t data;
|
||||
|
||||
_i2c->beginTransmission(_i2caddr);
|
||||
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.print("\t\t-> ");
|
||||
#endif
|
||||
|
||||
for (uint8_t i=0; i<commandLength; i++) {
|
||||
_i2c->write(command[i]);
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.print("0x"); Serial.print(command[i], HEX); Serial.print(", ");
|
||||
#endif
|
||||
}
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.println();
|
||||
#endif
|
||||
_i2c->endTransmission();
|
||||
|
||||
delay(delayms);
|
||||
|
||||
if (readlen == 0)
|
||||
return true;
|
||||
|
||||
uint8_t replylen = readlen * (SGP30_WORD_LEN +1);
|
||||
if (_i2c->requestFrom(_i2caddr, replylen) != replylen)
|
||||
return false;
|
||||
uint8_t replybuffer[replylen];
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.print("\t\t<- ");
|
||||
#endif
|
||||
for (uint8_t i=0; i<replylen; i++) {
|
||||
replybuffer[i] = _i2c->read();
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.print("0x"); Serial.print(replybuffer[i], HEX); Serial.print(", ");
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.println();
|
||||
#endif
|
||||
|
||||
for (uint8_t i=0; i<readlen; i++) {
|
||||
uint8_t crc = generateCRC(replybuffer+i*3, 2);
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.print("\t\tCRC calced: 0x"); Serial.print(crc, HEX);
|
||||
Serial.print(" vs. 0x"); Serial.println(replybuffer[i * 3 + 2], HEX);
|
||||
#endif
|
||||
if (crc != replybuffer[i * 3 + 2])
|
||||
return false;
|
||||
// success! store it
|
||||
readdata[i] = replybuffer[i*3];
|
||||
readdata[i] <<= 8;
|
||||
readdata[i] |= replybuffer[i*3 + 1];
|
||||
#ifdef I2C_DEBUG
|
||||
Serial.print("\t\tRead: 0x"); Serial.println(readdata[i], HEX);
|
||||
#endif
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
uint8_t Adafruit_SGP30::generateCRC(uint8_t *data, uint8_t datalen) {
|
||||
// calculates 8-Bit checksum with given polynomial
|
||||
uint8_t crc = SGP30_CRC8_INIT;
|
||||
|
||||
for (uint8_t i=0; i<datalen; i++) {
|
||||
crc ^= data[i];
|
||||
for (uint8_t b=0; b<8; b++) {
|
||||
if (crc & 0x80)
|
||||
crc = (crc << 1) ^ SGP30_CRC8_POLYNOMIAL;
|
||||
else
|
||||
crc <<= 1;
|
||||
}
|
||||
}
|
||||
return crc;
|
||||
}
|
||||
|
|
@ -1,69 +0,0 @@
|
|||
/*!
|
||||
* @file Adafruit_SGP30.h
|
||||
*
|
||||
* This is the documentation for Adafruit's SGP30 driver for the
|
||||
* Arduino platform. It is designed specifically to work with the
|
||||
* Adafruit SGP30 breakout: http://www.adafruit.com/products/3709
|
||||
*
|
||||
* These sensors use I2C to communicate, 2 pins (SCL+SDA) are required
|
||||
* to interface with the breakout.
|
||||
*
|
||||
* Adafruit invests time and resources providing this open source code,
|
||||
* please support Adafruit and open-source hardware by purchasing
|
||||
* products from Adafruit!
|
||||
*
|
||||
* Written by Ladyada for Adafruit Industries.
|
||||
*
|
||||
* BSD license, all text here must be included in any redistribution.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "Arduino.h"
|
||||
#include <Wire.h>
|
||||
|
||||
// the i2c address
|
||||
#define SGP30_I2CADDR_DEFAULT 0x58 ///< SGP30 has only one I2C address
|
||||
|
||||
// commands and constants
|
||||
#define SGP30_FEATURESET 0x0020 ///< The required set for this library
|
||||
#define SGP30_CRC8_POLYNOMIAL 0x31 ///< Seed for SGP30's CRC polynomial
|
||||
#define SGP30_CRC8_INIT 0xFF ///< Init value for CRC
|
||||
#define SGP30_WORD_LEN 2 ///< 2 bytes per word
|
||||
|
||||
/**************************************************************************/
|
||||
/*! Class that stores state and functions for interacting with SGP30 Gas Sensor */
|
||||
/**************************************************************************/
|
||||
class Adafruit_SGP30 {
|
||||
public:
|
||||
Adafruit_SGP30();
|
||||
boolean begin(TwoWire *theWire = NULL);
|
||||
boolean IAQinit(void);
|
||||
boolean IAQmeasure(void);
|
||||
|
||||
boolean getIAQBaseline(uint16_t *eco2_base, uint16_t *tvoc_base);
|
||||
boolean setIAQBaseline(uint16_t eco2_base, uint16_t tvoc_base);
|
||||
boolean setHumidity(uint32_t absolute_humidity);
|
||||
|
||||
/**
|
||||
* The last measurement of the IAQ-calculated Total Volatile Organic Compounds in ppb. This value is set when you call {@link IAQmeasure()}
|
||||
*/
|
||||
uint16_t TVOC;
|
||||
|
||||
/**
|
||||
* The last measurement of the IAQ-calculated equivalent CO2 in ppm. This value is set when you call {@link IAQmeasure()}
|
||||
*/
|
||||
uint16_t eCO2;
|
||||
|
||||
/**
|
||||
* The 48-bit serial number, this value is set when you call {@link begin()}
|
||||
*/
|
||||
uint16_t serialnumber[3];
|
||||
private:
|
||||
TwoWire *_i2c;
|
||||
uint8_t _i2caddr;
|
||||
|
||||
void write(uint8_t address, uint8_t *data, uint8_t n);
|
||||
void read(uint8_t address, uint8_t *data, uint8_t n);
|
||||
boolean readWordFromCommand(uint8_t command[], uint8_t commandLength, uint16_t delay, uint16_t *readdata = NULL, uint8_t readlen = 0);
|
||||
uint8_t generateCRC(uint8_t data[], uint8_t datalen);
|
||||
};
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
Adafruit_SGP30
|
||||
================
|
||||
|
||||
This is the Adafruit SGP30 Gas / Air Quality I2C sensor library
|
||||
|
||||
Tested and works great with the Aadafruit SGP30 Breakout Board
|
||||
* http://www.adafruit.com/products/3709
|
||||
|
||||
This chip uses I2C to communicate, 2 pins are required to interface
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above must be included in any redistribution
|
||||
|
||||
|
|
@ -1,61 +0,0 @@
|
|||
#include <Wire.h>
|
||||
#include "Adafruit_SGP30.h"
|
||||
|
||||
Adafruit_SGP30 sgp;
|
||||
|
||||
/* return absolute humidity [mg/m^3] with approximation formula
|
||||
* @param temperature [°C]
|
||||
* @param humidity [%RH]
|
||||
*/
|
||||
uint32_t getAbsoluteHumidity(float temperature, float humidity) {
|
||||
// approximation formula from Sensirion SGP30 Driver Integration chapter 3.15
|
||||
const float absoluteHumidity = 216.7f * ((humidity / 100.0f) * 6.112f * exp((17.62f * temperature) / (243.12f + temperature)) / (273.15f + temperature)); // [g/m^3]
|
||||
const uint32_t absoluteHumidityScaled = static_cast<uint32_t>(1000.0f * absoluteHumidity); // [mg/m^3]
|
||||
return absoluteHumidityScaled;
|
||||
}
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
Serial.println("SGP30 test");
|
||||
|
||||
if (! sgp.begin()){
|
||||
Serial.println("Sensor not found :(");
|
||||
while (1);
|
||||
}
|
||||
Serial.print("Found SGP30 serial #");
|
||||
Serial.print(sgp.serialnumber[0], HEX);
|
||||
Serial.print(sgp.serialnumber[1], HEX);
|
||||
Serial.println(sgp.serialnumber[2], HEX);
|
||||
|
||||
// If you have a baseline measurement from before you can assign it to start, to 'self-calibrate'
|
||||
//sgp.setIAQBaseline(0x8E68, 0x8F41); // Will vary for each sensor!
|
||||
}
|
||||
|
||||
int counter = 0;
|
||||
void loop() {
|
||||
// If you have a temperature / humidity sensor, you can set the absolute humidity to enable the humditiy compensation for the air quality signals
|
||||
//float temperature = 22.1; // [°C]
|
||||
//float humidity = 45.2; // [%RH]
|
||||
//sgp.setHumidity(getAbsoluteHumidity(temperature, humidity));
|
||||
|
||||
if (! sgp.IAQmeasure()) {
|
||||
Serial.println("Measurement failed");
|
||||
return;
|
||||
}
|
||||
Serial.print("TVOC "); Serial.print(sgp.TVOC); Serial.print(" ppb\t");
|
||||
Serial.print("eCO2 "); Serial.print(sgp.eCO2); Serial.println(" ppm");
|
||||
delay(1000);
|
||||
|
||||
counter++;
|
||||
if (counter == 30) {
|
||||
counter = 0;
|
||||
|
||||
uint16_t TVOC_base, eCO2_base;
|
||||
if (! sgp.getIAQBaseline(&eCO2_base, &TVOC_base)) {
|
||||
Serial.println("Failed to get baseline readings");
|
||||
return;
|
||||
}
|
||||
Serial.print("****Baseline values: eCO2: 0x"); Serial.print(eCO2_base, HEX);
|
||||
Serial.print(" & TVOC: 0x"); Serial.println(TVOC_base, HEX);
|
||||
}
|
||||
}
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
name=Adafruit SGP30 Sensor
|
||||
version=1.0.3
|
||||
author=Adafruit
|
||||
maintainer=Adafruit <info@adafruit.com>
|
||||
sentence=This is an Arduino library for the Adafruit SGP30 Gas / Air Quality Sensor
|
||||
paragraph=This is an Arduino library for the Adafruit SGP30 Gas / Air Quality Sensor
|
||||
category=Sensors
|
||||
url=https://github.com/adafruit/Adafruit_SGP30
|
||||
architectures=*
|
||||
0
lib/Adafruit_SGP30-1.0.3/license.txt → lib/Adafruit_SGP30-1.2.0/license.txt
Executable file → Normal file
0
lib/Adafruit_SGP30-1.0.3/license.txt → lib/Adafruit_SGP30-1.2.0/license.txt
Executable file → Normal file
|
|
@ -1,26 +0,0 @@
|
|||
Software License Agreement (BSD License)
|
||||
|
||||
Copyright (c) 2012, Adafruit Industries
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
1. Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
2. Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
3. Neither the name of the copyright holders nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
|
||||
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
Loading…
Reference in New Issue