mirror of https://github.com/arendst/Tasmota.git
Merge pull request #3041 from killadm/development
update of zh-CN language
This commit is contained in:
commit
6219dcacc0
|
@ -28,7 +28,7 @@
|
||||||
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
|
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
|
||||||
* Use online command Prefix to translate cmnd, stat and tele.
|
* Use online command Prefix to translate cmnd, stat and tele.
|
||||||
*
|
*
|
||||||
* Updated until v5.12.0d
|
* Updated until v5.14.0b
|
||||||
\*********************************************************************/
|
\*********************************************************************/
|
||||||
|
|
||||||
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
|
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
|
||||||
|
@ -44,8 +44,8 @@
|
||||||
#define D_HOUR_MINUTE_SEPARATOR ":"
|
#define D_HOUR_MINUTE_SEPARATOR ":"
|
||||||
#define D_MINUTE_SECOND_SEPARATOR ":"
|
#define D_MINUTE_SECOND_SEPARATOR ":"
|
||||||
|
|
||||||
#define D_DAY3LIST "SunMonTueWedThuFriSat"
|
#define D_DAY3LIST "日 一 二 三 四 五 六 "
|
||||||
#define D_MONTH3LIST "JanFebMarAprMayJunJulAugSepOctNovDec"
|
#define D_MONTH3LIST "1月 2月 3月 4月 5月 6月 7月 8月 9月 10月11月12月"
|
||||||
|
|
||||||
// Non JSON decimal separator
|
// Non JSON decimal separator
|
||||||
#define D_DECIMAL_SEPARATOR "."
|
#define D_DECIMAL_SEPARATOR "."
|
||||||
|
@ -59,9 +59,9 @@
|
||||||
#define D_BLINK "闪烁"
|
#define D_BLINK "闪烁"
|
||||||
#define D_BLINKOFF "闪烁关"
|
#define D_BLINKOFF "闪烁关"
|
||||||
#define D_BOOT_COUNT "启动次数"
|
#define D_BOOT_COUNT "启动次数"
|
||||||
#define D_BRIGHTLIGHT "亮度"
|
#define D_BRIGHTLIGHT "亮"
|
||||||
#define D_BUTTON "按钮"
|
#define D_BUTTON "按钮"
|
||||||
#define D_BY "by" // Written by me
|
#define D_BY "汉化: killadm 作者:" // Written by me
|
||||||
#define D_BYTES "大小:"
|
#define D_BYTES "大小:"
|
||||||
#define D_CELSIUS "摄氏"
|
#define D_CELSIUS "摄氏"
|
||||||
#define D_CO2 "二氧化碳"
|
#define D_CO2 "二氧化碳"
|
||||||
|
@ -70,13 +70,13 @@
|
||||||
#define D_COMMAND "命令:"
|
#define D_COMMAND "命令:"
|
||||||
#define D_CONNECTED "已连接"
|
#define D_CONNECTED "已连接"
|
||||||
#define D_COUNT "数量:"
|
#define D_COUNT "数量:"
|
||||||
#define D_COUNTER "Counter"
|
#define D_COUNTER "计数器"
|
||||||
#define D_CURRENT "电流" // As in Voltage and Current
|
#define D_CURRENT "电流" // As in Voltage and Current
|
||||||
#define D_DATA "数据:"
|
#define D_DATA "数据:"
|
||||||
#define D_DARKLIGHT "Dark"
|
#define D_DARKLIGHT "暗"
|
||||||
#define D_DEBUG "调试"
|
#define D_DEBUG "调试"
|
||||||
#define D_DISABLED "禁用"
|
#define D_DISABLED "禁用"
|
||||||
#define D_DISTANCE "Distance"
|
#define D_DISTANCE "距离"
|
||||||
#define D_DNS_SERVER "DNS服务器"
|
#define D_DNS_SERVER "DNS服务器"
|
||||||
#define D_DONE "完成"
|
#define D_DONE "完成"
|
||||||
#define D_DST_TIME "DST"
|
#define D_DST_TIME "DST"
|
||||||
|
@ -87,12 +87,12 @@
|
||||||
#define D_ERROR "错误"
|
#define D_ERROR "错误"
|
||||||
#define D_FAHRENHEIT "华氏"
|
#define D_FAHRENHEIT "华氏"
|
||||||
#define D_FAILED "失败"
|
#define D_FAILED "失败"
|
||||||
#define D_FALLBACK "Fallback"
|
#define D_FALLBACK "回退"
|
||||||
#define D_FALLBACK_TOPIC "Fallback Topic"
|
#define D_FALLBACK_TOPIC "回退主题"
|
||||||
#define D_FALSE "False"
|
#define D_FALSE "False"
|
||||||
#define D_FILE "文件:"
|
#define D_FILE "文件:"
|
||||||
#define D_FREE_MEMORY "空闲内存"
|
#define D_FREE_MEMORY "空闲内存"
|
||||||
#define D_FREQUENCY "Frequency"
|
#define D_FREQUENCY "频率"
|
||||||
#define D_GAS "气体"
|
#define D_GAS "气体"
|
||||||
#define D_GATEWAY "网关"
|
#define D_GATEWAY "网关"
|
||||||
#define D_GROUP "组:"
|
#define D_GROUP "组:"
|
||||||
|
@ -100,10 +100,10 @@
|
||||||
#define D_HOSTNAME "主机名"
|
#define D_HOSTNAME "主机名"
|
||||||
#define D_HUMIDITY "湿度"
|
#define D_HUMIDITY "湿度"
|
||||||
#define D_ILLUMINANCE "照度"
|
#define D_ILLUMINANCE "照度"
|
||||||
#define D_IMMEDIATE "immediate" // Button immediate
|
#define D_IMMEDIATE "单次按键" // Button immediate
|
||||||
#define D_INDEX "索引:"
|
#define D_INDEX "索引:"
|
||||||
#define D_INFO "信息"
|
#define D_INFO "信息"
|
||||||
#define D_INFRARED "Infrared"
|
#define D_INFRARED "红外线"
|
||||||
#define D_INITIALIZED "初始化完成"
|
#define D_INITIALIZED "初始化完成"
|
||||||
#define D_IP_ADDRESS "IP地址"
|
#define D_IP_ADDRESS "IP地址"
|
||||||
#define D_LIGHT "灯"
|
#define D_LIGHT "灯"
|
||||||
|
@ -122,9 +122,9 @@
|
||||||
#define D_PORT "端口"
|
#define D_PORT "端口"
|
||||||
#define D_POWER_FACTOR "功率因数"
|
#define D_POWER_FACTOR "功率因数"
|
||||||
#define D_POWERUSAGE "功率"
|
#define D_POWERUSAGE "功率"
|
||||||
#define D_POWERUSAGE_ACTIVE "Active Power"
|
#define D_POWERUSAGE_ACTIVE "有功功率"
|
||||||
#define D_POWERUSAGE_APPARENT "Apparent Power"
|
#define D_POWERUSAGE_APPARENT "视在功率"
|
||||||
#define D_POWERUSAGE_REACTIVE "Reactive Power"
|
#define D_POWERUSAGE_REACTIVE "无功功率"
|
||||||
#define D_PRESSURE "气压"
|
#define D_PRESSURE "气压"
|
||||||
#define D_PRESSUREATSEALEVEL "海平面气压"
|
#define D_PRESSUREATSEALEVEL "海平面气压"
|
||||||
#define D_PROGRAM_FLASH_SIZE "固件 Flash 大小"
|
#define D_PROGRAM_FLASH_SIZE "固件 Flash 大小"
|
||||||
|
@ -136,7 +136,7 @@
|
||||||
#define D_RESTART_REASON "重启原因"
|
#define D_RESTART_REASON "重启原因"
|
||||||
#define D_RESTORE "恢复"
|
#define D_RESTORE "恢复"
|
||||||
#define D_RETAINED "已保留"
|
#define D_RETAINED "已保留"
|
||||||
#define D_RULE "Rule"
|
#define D_RULE "规则"
|
||||||
#define D_SAVE "保存"
|
#define D_SAVE "保存"
|
||||||
#define D_SENSOR "传感器"
|
#define D_SENSOR "传感器"
|
||||||
#define D_SSID "名称"
|
#define D_SSID "名称"
|
||||||
|
@ -146,8 +146,8 @@
|
||||||
#define D_SUBNET_MASK "子网掩码"
|
#define D_SUBNET_MASK "子网掩码"
|
||||||
#define D_SUBSCRIBE_TO "订阅"
|
#define D_SUBSCRIBE_TO "订阅"
|
||||||
#define D_SUCCESSFUL "成功"
|
#define D_SUCCESSFUL "成功"
|
||||||
#define D_SUNRISE "Sunrise"
|
#define D_SUNRISE "日出"
|
||||||
#define D_SUNSET "Sunset"
|
#define D_SUNSET "日落"
|
||||||
#define D_TEMPERATURE "温度"
|
#define D_TEMPERATURE "温度"
|
||||||
#define D_TO "to"
|
#define D_TO "to"
|
||||||
#define D_TOGGLE "切换"
|
#define D_TOGGLE "切换"
|
||||||
|
@ -160,7 +160,7 @@
|
||||||
#define D_UPTIME "运行时间"
|
#define D_UPTIME "运行时间"
|
||||||
#define D_USER "用户名"
|
#define D_USER "用户名"
|
||||||
#define D_UTC_TIME "UTC"
|
#define D_UTC_TIME "UTC"
|
||||||
#define D_UV_INDEX "UV Index"
|
#define D_UV_INDEX "紫外线指数"
|
||||||
#define D_UV_LEVEL "紫外线水平"
|
#define D_UV_LEVEL "紫外线水平"
|
||||||
#define D_VERSION "版本"
|
#define D_VERSION "版本"
|
||||||
#define D_VOLTAGE "电压"
|
#define D_VOLTAGE "电压"
|
||||||
|
@ -182,8 +182,8 @@
|
||||||
// support.ino
|
// support.ino
|
||||||
#define D_OSWATCH "osWatch"
|
#define D_OSWATCH "osWatch"
|
||||||
#define D_BLOCKED_LOOP "Blocked Loop"
|
#define D_BLOCKED_LOOP "Blocked Loop"
|
||||||
#define D_WPS_FAILED_WITH_STATUS "WPSconfig FAILED with status"
|
#define D_WPS_FAILED_WITH_STATUS "WPS 配置失败,状态:"
|
||||||
#define D_ACTIVE_FOR_3_MINUTES "active for 3 minutes"
|
#define D_ACTIVE_FOR_3_MINUTES "激活 3 分钟"
|
||||||
#define D_FAILED_TO_START "未能启动"
|
#define D_FAILED_TO_START "未能启动"
|
||||||
#define D_PATCH_ISSUE_2186 "Patch issue 2186"
|
#define D_PATCH_ISSUE_2186 "Patch issue 2186"
|
||||||
#define D_CONNECTING_TO_AP "连接到 AP"
|
#define D_CONNECTING_TO_AP "连接到 AP"
|
||||||
|
@ -196,29 +196,29 @@
|
||||||
#define D_CHECKING_CONNECTION "检查连接..."
|
#define D_CHECKING_CONNECTION "检查连接..."
|
||||||
#define D_QUERY_DONE "查询完成。 发现 MQTT 服务"
|
#define D_QUERY_DONE "查询完成。 发现 MQTT 服务"
|
||||||
#define D_MQTT_SERVICE_FOUND "发现 MQTT 服务:"
|
#define D_MQTT_SERVICE_FOUND "发现 MQTT 服务:"
|
||||||
#define D_FOUND_AT "found at"
|
#define D_FOUND_AT "发现:"
|
||||||
#define D_SYSLOG_HOST_NOT_FOUND "Syslog 主机未找到"
|
#define D_SYSLOG_HOST_NOT_FOUND "Syslog 主机未找到"
|
||||||
|
|
||||||
// settings.ino
|
// settings.ino
|
||||||
#define D_SAVED_TO_FLASH_AT "保存到 flash:"
|
#define D_SAVED_TO_FLASH_AT "保存到 flash:"
|
||||||
#define D_LOADED_FROM_FLASH_AT "从 flash 载入"
|
#define D_LOADED_FROM_FLASH_AT "从 flash 载入:"
|
||||||
#define D_USE_DEFAULTS "使用默认设置"
|
#define D_USE_DEFAULTS "使用默认设置"
|
||||||
#define D_ERASED_SECTOR "擦除删除"
|
#define D_ERASED_SECTOR "擦除扇区"
|
||||||
|
|
||||||
// xdrv_02_webserver.ino
|
// webserver.ino
|
||||||
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "固件版本过低 - 请升级"
|
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "当前是精简版固件 - 请升级"
|
||||||
#define D_WEBSERVER_ACTIVE_ON "Web服务器:"
|
#define D_WEBSERVER_ACTIVE_ON "Web 服务器地址:"
|
||||||
#define D_WITH_IP_ADDRESS "IP 地址:"
|
#define D_WITH_IP_ADDRESS "IP 地址:"
|
||||||
#define D_WEBSERVER_STOPPED "Web 服务器已停止"
|
#define D_WEBSERVER_STOPPED "Web 服务已停止"
|
||||||
#define D_FILE_NOT_FOUND "文件未找到"
|
#define D_FILE_NOT_FOUND "文件未找到"
|
||||||
#define D_REDIRECTED "重定向到认证页面"
|
#define D_REDIRECTED "重定向到认证页面"
|
||||||
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager set AccessPoint and keep Station"
|
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager 设置无线操作模式"
|
||||||
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager 设置接入点"
|
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager 设置接入点"
|
||||||
#define D_TRYING_TO_CONNECT "尝试将设备连接到网络"
|
#define D_TRYING_TO_CONNECT "尝试将设备连接到网络"
|
||||||
|
|
||||||
#define D_RESTART_IN "重启需要"
|
#define D_RESTART_IN "重启需要"
|
||||||
#define D_SECONDS "秒"
|
#define D_SECONDS "秒"
|
||||||
#define D_DEVICE_WILL_RESTART "设备将在几分钟内重启"
|
#define D_DEVICE_WILL_RESTART "设备将在几秒钟内重启"
|
||||||
#define D_BUTTON_TOGGLE "状态切换"
|
#define D_BUTTON_TOGGLE "状态切换"
|
||||||
#define D_CONFIGURATION "设置"
|
#define D_CONFIGURATION "设置"
|
||||||
#define D_INFORMATION "信息"
|
#define D_INFORMATION "信息"
|
||||||
|
@ -288,16 +288,16 @@
|
||||||
|
|
||||||
#define D_PROGRAM_VERSION "固件版本"
|
#define D_PROGRAM_VERSION "固件版本"
|
||||||
#define D_BUILD_DATE_AND_TIME "编译时间"
|
#define D_BUILD_DATE_AND_TIME "编译时间"
|
||||||
#define D_CORE_AND_SDK_VERSION "内核版本"
|
#define D_CORE_AND_SDK_VERSION "内核和 SDK 版本"
|
||||||
#define D_FLASH_WRITE_COUNT "刷机次数"
|
#define D_FLASH_WRITE_COUNT "Flash 写入次数"
|
||||||
#define D_MAC_ADDRESS "MAC 地址"
|
#define D_MAC_ADDRESS "MAC 地址"
|
||||||
#define D_MQTT_HOST "MQTT 主机"
|
#define D_MQTT_HOST "MQTT 主机"
|
||||||
#define D_MQTT_PORT "MQTT 端口"
|
#define D_MQTT_PORT "MQTT 端口"
|
||||||
#define D_MQTT_CLIENT "MQTT 客户端"
|
#define D_MQTT_CLIENT "MQTT 客户端"
|
||||||
#define D_MQTT_USER "MQTT 用户名"
|
#define D_MQTT_USER "MQTT 用户名"
|
||||||
#define D_MQTT_TOPIC "MQTT 主题(Topic)"
|
#define D_MQTT_TOPIC "MQTT 主题"
|
||||||
#define D_MQTT_GROUP_TOPIC "MQTT 主题组(Group Topic)"
|
#define D_MQTT_GROUP_TOPIC "MQTT 主题组"
|
||||||
#define D_MQTT_FULL_TOPIC "MQTT 完整主题(Full Topic)"
|
#define D_MQTT_FULL_TOPIC "MQTT 完整主题"
|
||||||
#define D_MDNS_DISCOVERY "mDNS 发现"
|
#define D_MDNS_DISCOVERY "mDNS 发现"
|
||||||
#define D_MDNS_ADVERTISE "mDNS 广播"
|
#define D_MDNS_ADVERTISE "mDNS 广播"
|
||||||
#define D_ESP_CHIP_ID "ESP 芯片 ID"
|
#define D_ESP_CHIP_ID "ESP 芯片 ID"
|
||||||
|
@ -312,26 +312,26 @@
|
||||||
#define D_UPLOAD_STARTED "开始上传"
|
#define D_UPLOAD_STARTED "开始上传"
|
||||||
#define D_UPGRADE_STARTED "开始升级"
|
#define D_UPGRADE_STARTED "开始升级"
|
||||||
#define D_UPLOAD_DONE "上传完成"
|
#define D_UPLOAD_DONE "上传完成"
|
||||||
#define D_UPLOAD_ERR_1 "没有选择文件"
|
#define D_UPLOAD_ERR_1 "没有选择任何文件"
|
||||||
#define D_UPLOAD_ERR_2 "没有足够空间"
|
#define D_UPLOAD_ERR_2 "没有足够空间"
|
||||||
#define D_UPLOAD_ERR_3 "固件头不是 0xE9"
|
#define D_UPLOAD_ERR_3 "固件头不是 0xE9"
|
||||||
#define D_UPLOAD_ERR_4 "固件太大"
|
#define D_UPLOAD_ERR_4 "固件大小超过 flash 容量"
|
||||||
#define D_UPLOAD_ERR_5 "上传缓冲区不匹配"
|
#define D_UPLOAD_ERR_5 "上传缓冲区不足,请先刷入精简固件再升级"
|
||||||
#define D_UPLOAD_ERR_6 "上传失败。 启用日志记录 3"
|
#define D_UPLOAD_ERR_6 "上传失败。 启用日志级别 3 调试"
|
||||||
#define D_UPLOAD_ERR_7 "上传取消"
|
#define D_UPLOAD_ERR_7 "上传取消"
|
||||||
#define D_UPLOAD_ERR_8 "错误的固件"
|
#define D_UPLOAD_ERR_8 "错误的固件"
|
||||||
#define D_UPLOAD_ERR_9 "固件太大"
|
#define D_UPLOAD_ERR_9 "固件太大"
|
||||||
#define D_UPLOAD_ERR_10 "Failed to init RF chip"
|
#define D_UPLOAD_ERR_10 "初始化 RF 芯片失败"
|
||||||
#define D_UPLOAD_ERR_11 "Failed to erase RF chip"
|
#define D_UPLOAD_ERR_11 "擦除 RF 芯片失败"
|
||||||
#define D_UPLOAD_ERR_12 "Failed to write to RF chip"
|
#define D_UPLOAD_ERR_12 "写入 RF 芯片失败"
|
||||||
#define D_UPLOAD_ERR_13 "Failed to decode RF firmware"
|
#define D_UPLOAD_ERR_13 "解码 RF 固件失败"
|
||||||
#define D_UPLOAD_ERROR_CODE "上传错误代码"
|
#define D_UPLOAD_ERROR_CODE "上传错误代码"
|
||||||
|
|
||||||
#define D_ENTER_COMMAND "输入命令"
|
#define D_ENTER_COMMAND "输入命令"
|
||||||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "如果预期响应,则启用Weblog 2"
|
#define D_ENABLE_WEBLOG_FOR_RESPONSE "如果想得到预期响应,请调整日志级别至: 2 信息"
|
||||||
#define D_NEED_USER_AND_PASSWORD "需要 user=<用户名>&password=<密码>"
|
#define D_NEED_USER_AND_PASSWORD "需要 user=<用户名>&password=<密码>"
|
||||||
|
|
||||||
// xdrv_01_mqtt.ino
|
// xdrv_00_mqtt.ino
|
||||||
#define D_FINGERPRINT "验证 TLS 指纹..."
|
#define D_FINGERPRINT "验证 TLS 指纹..."
|
||||||
#define D_TLS_CONNECT_FAILED_TO "TLS 连接失败"
|
#define D_TLS_CONNECT_FAILED_TO "TLS 连接失败"
|
||||||
#define D_RETRY_IN "重试倒计时:"
|
#define D_RETRY_IN "重试倒计时:"
|
||||||
|
@ -339,7 +339,7 @@
|
||||||
#define D_INSECURE "指纹无效导致连接不安全"
|
#define D_INSECURE "指纹无效导致连接不安全"
|
||||||
#define D_CONNECT_FAILED_TO "连接失败:"
|
#define D_CONNECT_FAILED_TO "连接失败:"
|
||||||
|
|
||||||
// xplg_wemohue.ino
|
// xdrv_wemohue.ino
|
||||||
#define D_MULTICAST_DISABLED "组播已禁用"
|
#define D_MULTICAST_DISABLED "组播已禁用"
|
||||||
#define D_MULTICAST_REJOINED "组播已(重新)加入"
|
#define D_MULTICAST_REJOINED "组播已(重新)加入"
|
||||||
#define D_MULTICAST_JOIN_FAILED "组播加入失败"
|
#define D_MULTICAST_JOIN_FAILED "组播加入失败"
|
||||||
|
@ -359,7 +359,7 @@
|
||||||
#define D_HUE_POST_ARGS "Hue POST 参数"
|
#define D_HUE_POST_ARGS "Hue POST 参数"
|
||||||
#define D_3_RESPONSE_PACKETS_SENT "3 请求包发送"
|
#define D_3_RESPONSE_PACKETS_SENT "3 请求包发送"
|
||||||
|
|
||||||
// xdrv_07_domoticz.ino
|
// xdrv_05_domoticz.ino
|
||||||
#define D_DOMOTICZ_PARAMETERS "Domoticz 设置"
|
#define D_DOMOTICZ_PARAMETERS "Domoticz 设置"
|
||||||
#define D_DOMOTICZ_IDX "Idx"
|
#define D_DOMOTICZ_IDX "Idx"
|
||||||
#define D_DOMOTICZ_KEY_IDX "Key idx"
|
#define D_DOMOTICZ_KEY_IDX "Key idx"
|
||||||
|
@ -377,35 +377,35 @@
|
||||||
#define D_DOMOTICZ_UPDATE_TIMER "更新计时器"
|
#define D_DOMOTICZ_UPDATE_TIMER "更新计时器"
|
||||||
|
|
||||||
// xdrv_09_timers.ino
|
// xdrv_09_timers.ino
|
||||||
#define D_CONFIGURE_TIMER "Configure Timer"
|
#define D_CONFIGURE_TIMER "定时器设置"
|
||||||
#define D_TIMER_PARAMETERS "Timer parameters"
|
#define D_TIMER_PARAMETERS "定时器参数"
|
||||||
#define D_TIMER_ARM "Arm"
|
#define D_TIMER_ARM "启用"
|
||||||
#define D_TIMER_TIME "Time"
|
#define D_TIMER_TIME "时间"
|
||||||
#define D_TIMER_DAYS "Days"
|
#define D_TIMER_DAYS "天"
|
||||||
#define D_TIMER_REPEAT "Repeat"
|
#define D_TIMER_REPEAT "重复"
|
||||||
#define D_TIMER_OUTPUT "Output"
|
#define D_TIMER_OUTPUT "输出"
|
||||||
#define D_TIMER_ACTION "Action"
|
#define D_TIMER_ACTION "动作"
|
||||||
|
|
||||||
// xdrv_10_knx.ino
|
// xdrv_10_knx.ino
|
||||||
#define D_CONFIGURE_KNX "Configure KNX"
|
#define D_CONFIGURE_KNX "KNX 配置"
|
||||||
#define D_KNX_PARAMETERS "KNX Parameters"
|
#define D_KNX_PARAMETERS "KNX 参数"
|
||||||
#define D_KNX_GENERAL_CONFIG "General"
|
#define D_KNX_GENERAL_CONFIG "同用"
|
||||||
#define D_KNX_PHYSICAL_ADDRESS "Physical Address"
|
#define D_KNX_PHYSICAL_ADDRESS "物理地址"
|
||||||
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )"
|
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( 在 KNX 网络上必须是唯一的 )"
|
||||||
#define D_KNX_ENABLE "Enable KNX"
|
#define D_KNX_ENABLE "启用 KNX"
|
||||||
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses"
|
#define D_KNX_GROUP_ADDRESS_TO_WRITE "要发送到组地址的数据"
|
||||||
#define D_ADD "Add"
|
#define D_ADD "添加"
|
||||||
#define D_DELETE "Delete"
|
#define D_DELETE "删除"
|
||||||
#define D_REPLY "Reply"
|
#define D_REPLY "回复"
|
||||||
#define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from"
|
#define D_KNX_GROUP_ADDRESS_TO_READ "用来接收数据的组地址"
|
||||||
#define D_LOG_KNX "KNX: "
|
#define D_LOG_KNX "KNX: "
|
||||||
#define D_RECEIVED_FROM "Received from"
|
#define D_RECEIVED_FROM "接收自"
|
||||||
#define D_KNX_COMMAND_WRITE "Write"
|
#define D_KNX_COMMAND_WRITE "写"
|
||||||
#define D_KNX_COMMAND_READ "Read"
|
#define D_KNX_COMMAND_READ "读"
|
||||||
#define D_KNX_COMMAND_OTHER "Other"
|
#define D_KNX_COMMAND_OTHER "其他"
|
||||||
#define D_SENT_TO "sent to"
|
#define D_SENT_TO "发送到"
|
||||||
#define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
|
#define D_KNX_WARNING "组地址(0/0/0)被保留,不能使用。"
|
||||||
#define D_KNX_ENHANCEMENT "Communication Enhancement"
|
#define D_KNX_ENHANCEMENT "通讯增强"
|
||||||
#define D_KNX_TX_SLOT "KNX TX"
|
#define D_KNX_TX_SLOT "KNX TX"
|
||||||
#define D_KNX_RX_SLOT "KNX RX"
|
#define D_KNX_RX_SLOT "KNX RX"
|
||||||
|
|
||||||
|
@ -436,7 +436,7 @@
|
||||||
#define D_PARTICALS_BEYOND "颗粒物直径大于"
|
#define D_PARTICALS_BEYOND "颗粒物直径大于"
|
||||||
|
|
||||||
// sonoff_template.h
|
// sonoff_template.h
|
||||||
#define D_SENSOR_NONE "None"
|
#define D_SENSOR_NONE "无"
|
||||||
#define D_SENSOR_DHT11 "DHT11"
|
#define D_SENSOR_DHT11 "DHT11"
|
||||||
#define D_SENSOR_AM2301 "AM2301"
|
#define D_SENSOR_AM2301 "AM2301"
|
||||||
#define D_SENSOR_SI7021 "SI7021"
|
#define D_SENSOR_SI7021 "SI7021"
|
||||||
|
@ -474,8 +474,7 @@
|
||||||
|
|
||||||
// Units
|
// Units
|
||||||
#define D_UNIT_AMPERE "安"
|
#define D_UNIT_AMPERE "安"
|
||||||
#define D_UNIT_CENTIMETER "cm"
|
#define D_UNIT_CENTIMETER "厘米"
|
||||||
#define D_UNIT_HERTZ "Hz"
|
|
||||||
#define D_UNIT_HOUR "时"
|
#define D_UNIT_HOUR "时"
|
||||||
#define D_UNIT_KILOOHM "千欧"
|
#define D_UNIT_KILOOHM "千欧"
|
||||||
#define D_UNIT_KILOWATTHOUR "千瓦时"
|
#define D_UNIT_KILOWATTHOUR "千瓦时"
|
||||||
|
@ -497,6 +496,7 @@
|
||||||
#define D_UNIT_VOLT "伏"
|
#define D_UNIT_VOLT "伏"
|
||||||
#define D_UNIT_WATT "瓦"
|
#define D_UNIT_WATT "瓦"
|
||||||
#define D_UNIT_WATTHOUR "瓦时"
|
#define D_UNIT_WATTHOUR "瓦时"
|
||||||
|
#define D_UNIT_HERTZ "赫兹"
|
||||||
|
|
||||||
// Log message prefix
|
// Log message prefix
|
||||||
#define D_LOG_APPLICATION "APP: " // Application
|
#define D_LOG_APPLICATION "APP: " // Application
|
||||||
|
|
Loading…
Reference in New Issue