[Thermostat] Change to language files (#19982)

* [Thermostat] Change to language files

* [Thermostat] Gradient display

Enhance display of gradient temperature

tasmota/language/af_AF.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Invoer"
 #define D_DEVICE_OUTPUT "Uitvoer"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor besig"
 #define D_SENSOR_CRC_ERROR "Sensor CRC fout"

tasmota/language/bg_BG.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Вход"
 #define D_DEVICE_OUTPUT "Изход"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Датчикът DS18x20 е зает"
 #define D_SENSOR_CRC_ERROR "Датчик DS18x20 - грешка CRC"

tasmota/language/ca_AD.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor busy"
 #define D_SENSOR_CRC_ERROR "Sensor CRC error"

tasmota/language/cs_CZ.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor DS18x20 obsazen"
 #define D_SENSOR_CRC_ERROR "Sensor DS18x20 chyba CRC"

tasmota/language/de_DE.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Eingang"
 #define D_DEVICE_OUTPUT "Ausgang"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Solltemperatur"
+#define D_THERMOSTAT_SENSOR           "Aktuelle Temperatur"
+#define D_THERMOSTAT_GRADIENT         "Temperaturänderung"
+#define D_THERMOSTAT_DUTY_CYCLE       "Aussteuergrad"
+#define D_THERMOSTAT_CYCLE_TIME       "Periodendauer"
+#define D_THERMOSTAT_PI_AUTOTUNE      "Auto PI-Abstimmung"
+#define D_THERMOSTAT_CONTROL_METHOD   "Reglertyp"
+#define D_THERMOSTAT_RAMP_UP          "Anlauf"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Anlauf (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor beschäftigt"
 #define D_SENSOR_CRC_ERROR "Sensor CRC-Fehler"

tasmota/language/el_GR.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Ο αισθητήρας είναι απασχολημένος"
 #define D_SENSOR_CRC_ERROR "Σφάλμα CRC αισθητήρα"

tasmota/language/en_GB.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor busy"
 #define D_SENSOR_CRC_ERROR "Sensor CRC error"

tasmota/language/es_ES.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Entrada"
 #define D_DEVICE_OUTPUT "Salida"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor ocupado"
 #define D_SENSOR_CRC_ERROR "Error CRC del Sensor"

tasmota/language/fr_FR.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Entrée"
 #define D_DEVICE_OUTPUT "Sortie"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Capteur occupé"
 #define D_SENSOR_CRC_ERROR "Erreur CRC capteur"

tasmota/language/fy_NL.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Yngong"
 #define D_DEVICE_OUTPUT "Útgong"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor drok"
 #define D_SENSOR_CRC_ERROR "Sensor CRC flater"

tasmota/language/he_HE.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "שרת עסוק"
 #define D_SENSOR_CRC_ERROR "בחיישן CRC שגיאת"

tasmota/language/hu_HU.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Bemenet"
 #define D_DEVICE_OUTPUT "Kimenet"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Szenzor foglalt"
 #define D_SENSOR_CRC_ERROR "Szenzor CRC hiba"

tasmota/language/it_IT.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT        "Ingresso"
 #define D_DEVICE_OUTPUT       "Uscita"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY       "Sensore occupato"
 #define D_SENSOR_CRC_ERROR  "Errore CRC sensore"

tasmota/language/ko_KO.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "입력"
 #define D_DEVICE_OUTPUT "출력"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "센서가 사용 중"
 #define D_SENSOR_CRC_ERROR "센서 CRC 에러"

tasmota/language/nl_NL.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Ingang"
 #define D_DEVICE_OUTPUT "Uitgang"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor bezet"
 #define D_SENSOR_CRC_ERROR "Sensor CRC fout"

tasmota/language/pl_PL.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Wejście"
 #define D_DEVICE_OUTPUT "Wyjście"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Czujnik zajęty"
 #define D_SENSOR_CRC_ERROR "Błąd CRC czujnika"

tasmota/language/pt_BR.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Entrada"
 #define D_DEVICE_OUTPUT "Saída"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor ocupado"
 #define D_SENSOR_CRC_ERROR "Erro CRC sensor"

tasmota/language/pt_PT.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Entrada"
 #define D_DEVICE_OUTPUT "Saída"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor ocupado"
 #define D_SENSOR_CRC_ERROR "Erro no CRC do sensor"

tasmota/language/ro_RO.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Intrare"
 #define D_DEVICE_OUTPUT "Ieșire"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Senzor ocupat"
 #define D_SENSOR_CRC_ERROR "Eroare senzor CRC"

tasmota/language/ru_RU.h

@@ -548,6 +548,22 @@
 #define D_DEVICE_INPUT "Вход"
 #define D_DEVICE_OUTPUT "Выход"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Датчик DS18x20 занят"
 #define D_SENSOR_CRC_ERROR "Датчик DS18x20 - ошибка CRC"

tasmota/language/sk_SK.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor DS18x20 obsadený"
 #define D_SENSOR_CRC_ERROR "Sensor DS18x20 chyba CRC"

tasmota/language/sv_SE.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensor upptagen"
 #define D_SENSOR_CRC_ERROR "Sensor CRC-fel"

tasmota/language/tr_TR.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Sensör başgül"
 #define D_SENSOR_CRC_ERROR "Sensor CRC hatası"

tasmota/language/uk_UA.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Давач DS18x20 зайнятий"
 #define D_SENSOR_CRC_ERROR "Давач DS18x20 - помилка CRC"

tasmota/language/vi_VN.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Đầu vào"
 #define D_DEVICE_OUTPUT "Đầu ra"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "Cảm biến đang bận"
 #define D_SENSOR_CRC_ERROR "Cảm biến CRC lỗi"

tasmota/language/zh_CN.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "Input"
 #define D_DEVICE_OUTPUT "Output"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "传感器正忙"
 #define D_SENSOR_CRC_ERROR "传感器 CRC 校验错误"

tasmota/language/zh_TW.h

@@ -547,6 +547,22 @@
 #define D_DEVICE_INPUT "輸入"
 #define D_DEVICE_OUTPUT "輸出"
 
+// xdrv_39_thermostat.ino
+#define D_THERMOSTAT                  "Thermostat"
+#define D_THERMOSTAT_SET_POINT        "Set Point Temperature"
+#define D_THERMOSTAT_SENSOR           "Current Temperature"
+#define D_THERMOSTAT_GRADIENT         "Gradient Temperature"
+#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
+#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
+#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
+#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
+#define D_THERMOSTAT_RAMP_UP          "Ramp up"
+#define D_THERMOSTAT_PI               "PI"
+#define D_THERMOSTAT_AUTOTUNE         "Autotune"
+#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
+#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
+#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
+
 // xsns_05_ds18b20.ino
 #define D_SENSOR_BUSY "感應器忙碌中"
 #define D_SENSOR_CRC_ERROR "感應器 CRC 校驗錯誤"

tasmota/tasmota_xdrv_driver/xdrv_39_thermostat.ino

@@ -2048,31 +2048,10 @@ void CmndEnableOutputSet(void)
  * Web UI
 \*********************************************************************************************/
 
-
-// To be done, add all of this defines in according languages file when all will be finished
-// Avoid multiple changes on all language files during development
-// --------------------------------------------------
-// xdrv_39_thermostat.ino
-#define D_THERMOSTAT                  "Thermostat"
-#define D_THERMOSTAT_SET_POINT        "Set Point"
-#define D_THERMOSTAT_SENSOR           "Current"
-#define D_THERMOSTAT_GRADIENT         "Gradient"
-#define D_THERMOSTAT_DUTY_CYCLE       "Duty cycle"
-#define D_THERMOSTAT_CYCLE_TIME       "Cycle time"
-#define D_THERMOSTAT_PI_AUTOTUNE      "PI Auto tuning"
-#define D_THERMOSTAT_CONTROL_METHOD   "Control method"
-#define D_THERMOSTAT_RAMP_UP          "Ramp up"
-#define D_THERMOSTAT_PI               "PI"
-#define D_THERMOSTAT_AUTOTUNE         "Autotune"
-#define D_THERMOSTAT_RAMP_UP_HYBRID   "Ramp up (Hybrid)"
-#define D_THERMOSTAT_PI_HYBRID        "PI (Hybrid)"
-#define D_THERMOSTAT_AUTOTUNE_HYBRID  "Autotune (Hybrid)"
-// --------------------------------------------------
-
-
 #ifdef USE_WEBSERVER
 const char HTTP_THERMOSTAT_INFO[]           PROGMEM = "{s}" D_THERMOSTAT "{m}%s{e}";
-const char HTTP_THERMOSTAT_TEMPERATURE[] PROGMEM = "{s}%s " D_TEMPERATURE "{m}%*_f " D_UNIT_DEGREE "%c{e}";
+const char HTTP_THERMOSTAT_TEMPERATURE[]    PROGMEM = "{s}%s{m}%*_f " D_UNIT_DEGREE "%c{e}";
+const char HTTP_THERMOSTAT_TEMP_GRAD[]      PROGMEM = "{s}" D_THERMOSTAT_GRADIENT "{m}%c%*_f " D_UNIT_DEGREE "%c/" D_UNIT_HOUR "{e}";
 const char HTTP_THERMOSTAT_DUTY_CYCLE[]     PROGMEM = "{s}" D_THERMOSTAT_DUTY_CYCLE "{m}%d " D_UNIT_PERCENT "{e}";
 const char HTTP_THERMOSTAT_CYCLE_TIME[]     PROGMEM = "{s}" D_THERMOSTAT_CYCLE_TIME "{m}%d " D_UNIT_MINUTE "{e}";
 const char HTTP_THERMOSTAT_CONTROL_METHOD[] PROGMEM = "{s}" D_THERMOSTAT_CONTROL_METHOD "{m}%s{e}";
@@ -2122,8 +2101,8 @@ void ThermostatShow(uint8_t ctr_output, bool json)
     if (Thermostat[ctr_output].status.temp_format == TEMP_FAHRENHEIT) {
       value = ThermostatCelsiusToFahrenheit((int32_t)Thermostat[ctr_output].temp_measured_gradient, TEMP_CONV_RELATIVE);
     }
-    f_temperature = value / 1000.0f;
-    WSContentSend_PD(HTTP_THERMOSTAT_TEMPERATURE, D_THERMOSTAT_GRADIENT, Settings->flag2.temperature_resolution, &f_temperature, c_unit);
+    f_temperature = abs(value) / 1000.0f;
+    WSContentSend_PD(HTTP_THERMOSTAT_TEMP_GRAD, value < 0 ? '-' : '+', Settings->flag2.temperature_resolution, &f_temperature, c_unit);
 
     WSContentSend_P(HTTP_THERMOSTAT_DUTY_CYCLE, ThermostatGetDutyCycle(ctr_output));