mirror of https://github.com/arendst/Tasmota.git
Merge branch 'arendst/development' into development
This commit is contained in:
reloxx13
commit
6771cc6d1e
12
README.md
12
README.md
|
|
@ -1,7 +1,7 @@
|
|||
## Sonoff-Tasmota
|
||||
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
|
||||
|
||||
Current version is **5.10.0c** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
Current version is **5.10.0e** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
|
||||
### ATTENTION All versions
|
||||
|
||||
|
|
@ -42,6 +42,7 @@ The following devices are supported:
|
|||
- [iTead Sonoff 4CH](https://www.itead.cc/smart-home/sonoff-4ch.html)
|
||||
- [iTead Sonoff 4CH Pro](https://www.itead.cc/smart-home/sonoff-4ch-pro.html)
|
||||
- [iTead S20 Smart Socket](https://www.itead.cc/smart-socket.html)
|
||||
- [Sonoff S22 Smart Socket](https://github.com/arendst/Sonoff-Tasmota/issues/627)
|
||||
- [iTead Slampher](https://www.itead.cc/slampher.html)
|
||||
- [iTead Sonoff Touch](https://www.itead.cc/sonoff-touch.html)
|
||||
- [iTead Sonoff T1](https://www.itead.cc/sonoff-t1.html)
|
||||
|
|
@ -54,8 +55,13 @@ The following devices are supported:
|
|||
- [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
|
||||
- [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
|
||||
- [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
|
||||
- [AI Light or any my9291 compatible RGBW LED](http://www.ebay.com/itm/172644855726)
|
||||
- MagicHome and AriLux AL-LC01 and AL-LC11
|
||||
- AI Light or any my9291 compatible RGBW LED bulb
|
||||
- H801 PWM LED controller
|
||||
- [MagicHome PWM LED controller](https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller)
|
||||
- AriLux AL-LC01, AL-LC06 and AL-LC11 PWM LED controller
|
||||
- [Supla device - Espablo-inCan mod. for electrical Installation box](https://forum.supla.org/viewtopic.php?f=33&t=2188)
|
||||
- [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
|
||||
- Wemos D1 mini and NodeMcu
|
||||
|
||||
### License
|
||||
|
||||
|
|
|
|||
|
|
@ -15,6 +15,8 @@ src_dir = sonoff
|
|||
;env_default = sonoff-NL
|
||||
;env_default = sonoff-DE
|
||||
;env_default = sonoff-PL
|
||||
;env_default = sonoff-IT
|
||||
;env_default = sonoff-emulation
|
||||
;env_default = sonoff-minimal
|
||||
;env_default = sonoff-ds18x20
|
||||
|
||||
|
|
@ -73,8 +75,31 @@ lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
|
|||
; *** Serial Monitor options
|
||||
monitor_baud = 115200
|
||||
|
||||
[env:sonoff-IT]
|
||||
platform = espressif8266
|
||||
framework = arduino
|
||||
board = esp01_1m
|
||||
board_flash_mode = dout
|
||||
build_flags = -Wl,-Tesp8266.flash.1m0.ld -DMQTT_MAX_PACKET_SIZE=512 -DMY_LANGUAGE=it-IT
|
||||
lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
|
||||
|
||||
; *** Serial Monitor options
|
||||
monitor_baud = 115200
|
||||
|
||||
; Sonoff with Wemo and Hue emulation
|
||||
[env:sonoff-emulation]
|
||||
platform = espressif8266
|
||||
framework = arduino
|
||||
board = esp01_1m
|
||||
board_flash_mode = dout
|
||||
build_flags = -Wl,-Tesp8266.flash.1m0.ld -DMQTT_MAX_PACKET_SIZE=512 -DUSE_EMULATION
|
||||
lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
|
||||
|
||||
; Serial Monitor options
|
||||
monitor_baud = 115200
|
||||
|
||||
; Sonoff minimal
|
||||
[env:sonoff-minimal] ; Placeholder to be configured
|
||||
[env:sonoff-minimal]
|
||||
platform = espressif8266
|
||||
framework = arduino
|
||||
board = esp01_1m
|
||||
|
|
|
|||
|
|
@ -1,4 +1,16 @@
|
|||
/* 5.10.0c
|
||||
/* 5.10.0e
|
||||
* Add Italian language file (#1449)
|
||||
* Fix Wemo Emulation once again closest to issue (#1357)
|
||||
* Add support for sensor SHT3x
|
||||
*
|
||||
* 5.10.0d
|
||||
* Renamed commands Color2,3,4 to Color3,4,5
|
||||
* Add command Color2 to set color while keeping same dimmer value
|
||||
* Add led signal to Carbon Dioxide (CO2) sensors (see user_config.h)
|
||||
* Fix Wemo Emulation again (#1357)
|
||||
* Updated German translation (#1438)
|
||||
*
|
||||
* 5.10.0c
|
||||
* Consolidate device serial (MH-Z19, SenseAir and Pzem004T) into TasmotaSerial library
|
||||
* Consolidate PWM device recognition
|
||||
* Fix Wemo Emulation (#1357)
|
||||
|
|
|
|||
|
|
@ -48,10 +48,10 @@
|
|||
#define D_ACTIVE "aktiv"
|
||||
#define D_ADDRESS "Addresse"
|
||||
#define D_ADMIN "Admin"
|
||||
#define D_AIR_QUALITY "Ausschlagsqualität"
|
||||
#define D_AIRQUALITY "AusschlagsQualität"
|
||||
#define D_AIR_QUALITY "Luftqualität"
|
||||
#define D_AIRQUALITY "LuftQualität"
|
||||
#define D_AP "AP" // Access Point
|
||||
#define D_APMAC_ADDRESS "APMac"
|
||||
#define D_APMAC_ADDRESS "AP-Mac"
|
||||
#define D_APPENDED "angehängt"
|
||||
#define D_AS "wie"
|
||||
#define D_AUTO "AUTO"
|
||||
|
|
@ -66,7 +66,7 @@
|
|||
#define D_BUTTON "Knopf"
|
||||
#define D_BY "von" // Written by me
|
||||
#define D_CELSIUS "Celsius"
|
||||
#define D_CO2 "Kohlenstoffdioxid"
|
||||
#define D_CO2 "CO²"
|
||||
#define D_CODE "code" // Button code
|
||||
#define D_COLDLIGHT "kalt"
|
||||
#define D_COMMAND "Befehl"
|
||||
|
|
@ -92,14 +92,14 @@
|
|||
#define D_EVERY "alle"
|
||||
#define D_FAHRENHEIT "Fahrenheit"
|
||||
#define D_FAILED "fehlgeschlagen"
|
||||
#define D_FALLBACK "Rückgriff"
|
||||
#define D_FALLBACK_TOPIC "Rückgriff topic"
|
||||
#define D_FALLBACKTOPIC "RückgriffTopic"
|
||||
#define D_FALLBACK "Fallback"
|
||||
#define D_FALLBACK_TOPIC "Fallback topic"
|
||||
#define D_FALLBACKTOPIC "FallbackTopic"
|
||||
#define D_FALSE "falsch"
|
||||
#define D_FILE "Datei"
|
||||
#define D_FLASHMODE "FlashMode"
|
||||
#define D_FLASHSIZE "FlashSize"
|
||||
#define D_FREE_MEMORY "Freier Speicher"
|
||||
#define D_FREE_MEMORY "Freier Arbeitsspeicher"
|
||||
#define D_FREEMEMORY "frei"
|
||||
#define D_FROM "von"
|
||||
#define D_GAS "Gas"
|
||||
|
|
@ -144,9 +144,9 @@
|
|||
#define D_POWERUSAGE "Leistung"
|
||||
#define D_PRESSURE "Druck"
|
||||
#define D_PRESSUREATSEALEVEL "MeeresDruck"
|
||||
#define D_PROGRAM_FLASH_SIZE "Programm Flash Größe"
|
||||
#define D_PROGRAM_FLASH_SIZE "Ges. Flash Speicher"
|
||||
#define D_PROGRAMFLASHSIZE "ProgramFlashSize"
|
||||
#define D_PROGRAM_SIZE "Programmgröße"
|
||||
#define D_PROGRAM_SIZE "Ben. Flash Speicher"
|
||||
#define D_PROGRAMSIZE "ProgramSize"
|
||||
#define D_PROJECT "Projekt"
|
||||
#define D_RECEIVED "erhalten"
|
||||
|
|
@ -170,7 +170,7 @@
|
|||
#define D_STARTED "gestartet"
|
||||
#define D_STARTDST "StartDST" // Start Daylight Savings Time
|
||||
#define D_STD_TIME "STD"
|
||||
#define D_STOP "stopp"
|
||||
#define D_STOP "Stop"
|
||||
#define D_SUBNET_MASK "Subnetzmaske"
|
||||
#define D_SUBNETMASK "Subnetmaske"
|
||||
#define D_SUBSCRIBE_TO "subscribe to"
|
||||
|
|
@ -244,7 +244,7 @@
|
|||
#define D_CONNECT_FAILED_WRONG_PASSWORD "Verbindung fehlgeschlagen mit AP weil das Passwort falsch ist"
|
||||
#define D_CONNECT_FAILED_AP_TIMEOUT "Verbindung fehlgeschlagen da der AP nicht antwortet (timeout)"
|
||||
#define D_ATTEMPTING_CONNECTION "Verbindungsversuch..."
|
||||
#define D_CHECKING_CONNECTION "prüfe Verbindung..."
|
||||
#define D_CHECKING_CONNECTION "Prüfe Verbindung..."
|
||||
#define D_QUERY_DONE "Suchanfrage abgeschlossen. MQTT-Services gefunden"
|
||||
#define D_MQTT_SERVICE_FOUND "MQTT-Service gefunden bei"
|
||||
#define D_I2CSCAN_DEVICES_FOUND_AT "Gerät(e) gefunden bei"
|
||||
|
|
@ -262,7 +262,7 @@
|
|||
#define D_REDIRECTED "umgeleitet zu captive portal"
|
||||
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "WLAN-Manager AccessPoint gesetzt und behält Station"
|
||||
#define D_WIFIMANAGER_SET_ACCESSPOINT "WLAN-Manager AccessPoint gesetzt"
|
||||
#define D_TRYING_TO_CONNECT "versuche Gerät mit Netzwerk zu verbinden"
|
||||
#define D_TRYING_TO_CONNECT "Versuche Gerät mit Netzwerk zu verbinden"
|
||||
|
||||
#define D_RESTART_IN "Neustart in"
|
||||
#define D_SECONDS "Sekunden"
|
||||
|
|
@ -272,9 +272,9 @@
|
|||
#define D_INFORMATION "Informationen"
|
||||
#define D_FIRMWARE_UPGRADE "Firmware Update"
|
||||
#define D_CONSOLE "Konsole"
|
||||
#define D_CONFIRM_RESTART "Neustart bestätigen"
|
||||
#define D_CONFIRM_RESTART "Wirklich neustarten?"
|
||||
|
||||
#define D_CONFIGURE_MODULE "Modul konfigurieren"
|
||||
#define D_CONFIGURE_MODULE "Gerät konfigurieren"
|
||||
#define D_CONFIGURE_WIFI "WLAN konfigurieren"
|
||||
#define D_CONFIGURE_MQTT "MQTT konfigurieren"
|
||||
#define D_CONFIGURE_DOMOTICZ "Domoticz konfigurieren"
|
||||
|
|
@ -286,8 +286,8 @@
|
|||
#define D_RESTORE_CONFIGURATION "Konfiguration wiederherstellen"
|
||||
#define D_MAIN_MENU "Hauptmenü"
|
||||
|
||||
#define D_MODULE_PARAMETERS "Modul Einstellungen"
|
||||
#define D_MODULE_TYPE "Modul Typ"
|
||||
#define D_MODULE_PARAMETERS "Geräte Einstellungen"
|
||||
#define D_MODULE_TYPE "Geräte Typ"
|
||||
#define D_GPIO "GPIO"
|
||||
#define D_SERIAL_IN "serieller Eingang [serial in]"
|
||||
#define D_SERIAL_OUT "serieller Ausgang [serial out]"
|
||||
|
|
@ -315,8 +315,8 @@
|
|||
#define D_LOGGING_PARAMETERS "Logging Einstellungen"
|
||||
#define D_LOG_LEVEL "Log level"
|
||||
#define D_MORE_DEBUG "More debug"
|
||||
#define D_SYSLOG_HOST "Syslog Host"
|
||||
#define D_SYSLOG_PORT "Syslog Port"
|
||||
#define D_SYSLOG_HOST "Sys Log Host"
|
||||
#define D_SYSLOG_PORT "Sys Log Port"
|
||||
#define D_TELEMETRY_PERIOD "Telemetry period"
|
||||
|
||||
#define D_OTHER_PARAMETERS "Sonstige Einstellungen"
|
||||
|
|
@ -348,8 +348,8 @@
|
|||
#define D_MDNS_ADVERTISE "mDNS-Bekanntmachung"
|
||||
#define D_ESP_CHIP_ID "ESP Chip ID"
|
||||
#define D_FLASH_CHIP_ID "Flash Chip ID"
|
||||
#define D_FLASH_CHIP_SIZE "Flash Größe"
|
||||
#define D_FREE_PROGRAM_SPACE "Freier Programm Speicher"
|
||||
#define D_FLASH_CHIP_SIZE "Realer Flash Speicher"
|
||||
#define D_FREE_PROGRAM_SPACE "Verf. Flash Speicher"
|
||||
|
||||
#define D_UPGRADE_BY_WEBSERVER "Update über Web-Server"
|
||||
#define D_OTA_URL "OTA-URL"
|
||||
|
|
@ -370,7 +370,7 @@
|
|||
#define D_UPLOAD_ERROR_CODE "Upload Fehler Nummer"
|
||||
|
||||
#define D_ENTER_COMMAND "Befehl eingeben"
|
||||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "aktivere weblog 2 falls Reaktion erwartet"
|
||||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Aktivere Web Log Level 2 falls Reaktion erwartet"
|
||||
#define D_NEED_USER_AND_PASSWORD "Benutzer benötigt=<Benutzername>&password=<Passwort>"
|
||||
|
||||
// xdrv_domoticz.ino
|
||||
|
|
|
|||
|
|
@ -0,0 +1,710 @@
|
|||
/*
|
||||
it-IT.h - localization for Italian - Italy for Sonoff-Tasmota
|
||||
|
||||
Copyright (C) 2018 Gennaro Tortone
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _LANGUAGE_IT_IT_H_
|
||||
#define _LANGUAGE_IT_IT_H_
|
||||
|
||||
/*************************** ATTENTION *******************************\
|
||||
*
|
||||
* Due to memory constraints only UTF-8 is supported.
|
||||
* To save code space keep text as short as possible.
|
||||
* Time and Date provided by SDK can not be localized (yet).
|
||||
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
|
||||
* Use online command Prefix to translate cmnd, stat and tele.
|
||||
*
|
||||
\*********************************************************************/
|
||||
|
||||
// "2017-03-07T11:08:02" - ISO8601:2004
|
||||
#define D_YEAR_MONTH_SEPARATOR "-"
|
||||
#define D_MONTH_DAY_SEPARATOR "-"
|
||||
#define D_DATE_TIME_SEPARATOR "T"
|
||||
#define D_HOUR_MINUTE_SEPARATOR ":"
|
||||
#define D_MINUTE_SECOND_SEPARATOR ":"
|
||||
|
||||
#define D_DAY3LIST "DomLunMarMerGioVenSab"
|
||||
#define D_MONTH3LIST "GenFebMarAprMagGiuLugAgoSetOttNovDic"
|
||||
|
||||
// Non JSON decimal separator
|
||||
#define D_DECIMAL_SEPARATOR "."
|
||||
|
||||
// Common
|
||||
#define D_ABORTED "Aborted"
|
||||
#define D_ACTIVE "Active"
|
||||
#define D_ADDRESS "Address"
|
||||
#define D_ADMIN "Admin"
|
||||
#define D_AIR_QUALITY "Qualita' dell'aria"
|
||||
#define D_AIRQUALITY "AirQuality"
|
||||
#define D_AP "AP" // Access Point
|
||||
#define D_APMAC_ADDRESS "APMac"
|
||||
#define D_APPENDED "Appended"
|
||||
#define D_AS "come"
|
||||
#define D_AUTO "AUTO"
|
||||
#define D_BAUDRATE "Baudrate"
|
||||
#define D_BLINK "Blink"
|
||||
#define D_BLINKOFF "BlinkOff"
|
||||
#define D_BOOTVERSION "Boot"
|
||||
#define D_BOOT_COUNT "Boot Count"
|
||||
#define D_BOOTCOUNT "BootCount"
|
||||
#define D_BRIGHTLIGHT "Luminoso"
|
||||
#define D_BUILDDATETIME "BuildDateTime"
|
||||
#define D_BUTTON "Pulsante"
|
||||
#define D_BY "da" // Written by me
|
||||
#define D_CELSIUS "Celsius"
|
||||
#define D_CO2 "CO2"
|
||||
#define D_CODE "codice" // Button code
|
||||
#define D_COLDLIGHT "Fredda"
|
||||
#define D_COMMAND "Command"
|
||||
#define D_CONNECTED "Connesso"
|
||||
#define D_COREVERSION "Core"
|
||||
#define D_COUNT "Conteggio"
|
||||
#define D_COUNTER "Counter"
|
||||
#define D_CURRENT "Current" // As in Voltage and Current
|
||||
#define D_DATA "Data"
|
||||
#define D_DARKLIGHT "Scuro"
|
||||
#define D_DEBUG "Debug"
|
||||
#define D_DISABLED "Disabilitato"
|
||||
#define D_DNS_SERVER "DNS Server"
|
||||
#define D_DNSSERVER "DNSServer"
|
||||
#define D_DONE "Done"
|
||||
#define D_DST_TIME "DST"
|
||||
#define D_EMPTY "Empty"
|
||||
#define D_EMULATION "Emulazione"
|
||||
#define D_ENABLED "Abilitato"
|
||||
#define D_ENDDST "EndDST" // End Daylight Savings Time
|
||||
#define D_ERASE "Erase"
|
||||
#define D_ERROR "Error"
|
||||
#define D_EVERY "Ogni"
|
||||
#define D_FAHRENHEIT "Fahrenheit"
|
||||
#define D_FAILED "Fallito"
|
||||
#define D_FALLBACK "Fallback"
|
||||
#define D_FALLBACK_TOPIC "Topic Riserva"
|
||||
#define D_FALLBACKTOPIC "FallbackTopic"
|
||||
#define D_FALSE "False"
|
||||
#define D_FILE "File"
|
||||
#define D_FLASHMODE "FlashMode"
|
||||
#define D_FLASHSIZE "FlashSize"
|
||||
#define D_FREE_MEMORY "Memoria Libera"
|
||||
#define D_FREEMEMORY "Free"
|
||||
#define D_FROM "from"
|
||||
#define D_GAS "Gas"
|
||||
#define D_GATEWAY "Gateway"
|
||||
#define D_GROUP "Gruppo"
|
||||
#define D_HEAPSIZE "Heap"
|
||||
#define D_HIGH "High"
|
||||
#define D_HOST "Host"
|
||||
#define D_HOSTNAME "Hostname"
|
||||
#define D_HUMIDITY "Humidity"
|
||||
#define D_ID "Id"
|
||||
#define D_ILLUMINANCE "Illuminazione"
|
||||
#define D_IMMEDIATE "immediato" // Button immediate
|
||||
#define D_INDEX "Index"
|
||||
#define D_INFO "Info"
|
||||
#define D_INITIALIZED "Inizializzato"
|
||||
#define D_IP_ADDRESS "Indirizzo IP"
|
||||
#define D_LIGHT "Light"
|
||||
#define D_LIMIT "Limit"
|
||||
#define D_LOCAL_TIME "Local"
|
||||
#define D_LOW "Low"
|
||||
#define D_LWT "LWT"
|
||||
#define D_MAC "Mac"
|
||||
#define D_MASK "Mask"
|
||||
#define D_MODULE "Module"
|
||||
#define D_MQTT "MQTT"
|
||||
#define D_MULTI_PRESS "multi-pressione"
|
||||
#define D_NO "No"
|
||||
#define D_NOISE "Noise"
|
||||
#define D_NONE "Nessuno"
|
||||
#define D_OFF "Off"
|
||||
#define D_OFFLINE "Offline"
|
||||
#define D_OK "Ok"
|
||||
#define D_ON "On"
|
||||
#define D_ONLINE "Online"
|
||||
#define D_OR "or"
|
||||
#define D_PASSWORD "Password"
|
||||
#define D_PERIOD "Period"
|
||||
#define D_PORT "Porta"
|
||||
#define D_POWER_FACTOR "Fattore di potenza"
|
||||
#define D_POWERFACTOR "Factor"
|
||||
#define D_POWERUSAGE "Power"
|
||||
#define D_PRESSURE "Pressure"
|
||||
#define D_PRESSUREATSEALEVEL "SeaPressure"
|
||||
#define D_PROGRAM_FLASH_SIZE "Dimensione Flash Programma"
|
||||
#define D_PROGRAMFLASHSIZE "ProgramFlashSize"
|
||||
#define D_PROGRAM_SIZE "Dimensione Programma"
|
||||
#define D_PROGRAMSIZE "ProgramSize"
|
||||
#define D_PROJECT "Project"
|
||||
#define D_RECEIVED "Ricevuto"
|
||||
#define D_RESTART "Riavvio"
|
||||
#define D_RESTARTING "Restarting"
|
||||
#define D_RESTART_REASON "Causa Riavvio"
|
||||
#define D_RESTARTREASON "RestartReason"
|
||||
#define D_RESTORE "ripristino"
|
||||
#define D_RETAINED "salvato"
|
||||
#define D_SAVE "Salva"
|
||||
#define D_SAVEADDRESS "SaveAddress"
|
||||
#define D_SAVECOUNT "SaveCount"
|
||||
#define D_SAVESTATE "SaveState"
|
||||
#define D_SDKVERSION "SDK"
|
||||
#define D_SELECTED "selected"
|
||||
#define D_SENSOR "Sensore"
|
||||
#define D_SERIAL "Seriale"
|
||||
#define D_BYTES "Bytes"
|
||||
#define D_SSID "SSId"
|
||||
#define D_START "Start"
|
||||
#define D_STARTED "Started"
|
||||
#define D_STARTDST "StartDST" // Start Daylight Savings Time
|
||||
#define D_STD_TIME "STD"
|
||||
#define D_STOP "Stop"
|
||||
#define D_SUBNET_MASK "Maschera sottorete"
|
||||
#define D_SUBNETMASK "Subnetmask"
|
||||
#define D_SUBSCRIBE_TO "Sottoscrivi a"
|
||||
#define D_SUCCESSFUL "Successful"
|
||||
#define D_SWITCH "Switch"
|
||||
#define D_SYNC "Sync"
|
||||
#define D_SYS "Sys" // Sys log
|
||||
#define D_TEMPERATURE "Temperature"
|
||||
#define D_TEMPERATURE_UNIT "TempUnit"
|
||||
#define D_TIME "Time"
|
||||
#define D_TO "a"
|
||||
#define D_TODAY "Today"
|
||||
#define D_TOGGLE "Toggle"
|
||||
#define D_TOPIC "Topic"
|
||||
#define D_TOTAL "Total"
|
||||
#define D_TRANSMIT "Trasmesso"
|
||||
#define D_TRUE "True"
|
||||
#define D_TYPE "Type"
|
||||
#define D_UNKNOWN "Unknown"
|
||||
#define D_UPGRADE "aggiornamento"
|
||||
#define D_UPLOAD "Invio"
|
||||
#define D_UPTIME "Uptime"
|
||||
#define D_USER "Utente"
|
||||
#define D_UTC_TIME "UTC"
|
||||
#define D_UV_LEVEL "UV Level"
|
||||
#define D_VCC "Vcc"
|
||||
#define D_VERSION "Version"
|
||||
#define D_VOLTAGE "Voltage"
|
||||
#define D_WARMLIGHT "Calda"
|
||||
#define D_WEB "Web" // Web log
|
||||
#define D_WEB_SERVER "Web Server"
|
||||
#define D_WIFI "Wifi"
|
||||
#define D_WRONG "Wrong"
|
||||
#define D_YESTERDAY "Yesterday"
|
||||
|
||||
// settings.ino
|
||||
#define D_SAVED_TO_FLASH_AT "Salvato nella flash in"
|
||||
#define D_LOADED_FROM_FLASH_AT "Caricato dalla flash da"
|
||||
#define D_USE_DEFAULTS "Utilizzo valori default"
|
||||
#define D_ERASED_SECTOR "Settore cancellato"
|
||||
|
||||
// sonoff.ino
|
||||
#define D_LEVEL_10 "level 1-0"
|
||||
#define D_LEVEL_01 "level 0-1"
|
||||
#define D_SERIAL_LOGGING_DISABLED "Log seriale disabilitato"
|
||||
#define D_SYSLOG_LOGGING_REENABLED "Syslog ri-abilitato"
|
||||
|
||||
#define D_SET_BAUDRATE_TO "Baudrate impostato a"
|
||||
#define D_RECEIVED_TOPIC "Topic Ricevuto"
|
||||
#define D_DATA_SIZE "Dimensione Dati"
|
||||
#define D_ANALOG_INPUT "Analogico"
|
||||
|
||||
#define D_FINGERPRINT "Verifica TLS fingerprint..."
|
||||
#define D_TLS_CONNECT_FAILED_TO "Connessione TLS fallita a"
|
||||
#define D_RETRY_IN "Nuovo tentativo in"
|
||||
#define D_VERIFIED "Verificato"
|
||||
#define D_INSECURE "Connessione insicura a causa di Fingerprint non valido"
|
||||
#define D_CONNECT_FAILED_TO "Connessione Fallita a"
|
||||
|
||||
// support.ino
|
||||
#define D_OSWATCH "osWatch"
|
||||
#define D_BLOCKED_LOOP "Ciclo Bloccato"
|
||||
#define D_WPS_FAILED_WITH_STATUS "WPSconfig Fallito con stato"
|
||||
#define D_ACTIVE_FOR_3_MINUTES "attivo per 3 minuti"
|
||||
#define D_FAILED_TO_START "partenza fallita"
|
||||
#define D_PATCH_ISSUE_2186 "Patch issue 2186"
|
||||
#define D_CONNECTING_TO_AP "Connessione ad AP"
|
||||
#define D_IN_MODE "in modalita'"
|
||||
#define D_CONNECT_FAILED_NO_IP_ADDRESS "Connessione fallita, indirizzo IP non ricevuto"
|
||||
#define D_CONNECT_FAILED_AP_NOT_REACHED "Connessione fallita, AP non raggiungibile"
|
||||
#define D_CONNECT_FAILED_WRONG_PASSWORD "Connessione fallita, password AP non corretta"
|
||||
#define D_CONNECT_FAILED_AP_TIMEOUT "Connessione fallita, timeout AP"
|
||||
#define D_ATTEMPTING_CONNECTION "Tentativo di connessione..."
|
||||
#define D_CHECKING_CONNECTION "Controllo connessione..."
|
||||
#define D_QUERY_DONE "Query eseguita. Servizio MQTT trovato"
|
||||
#define D_MQTT_SERVICE_FOUND "Servizio MQTT trovato su"
|
||||
#define D_I2CSCAN_DEVICES_FOUND_AT "Dispositivo/i trovato a"
|
||||
#define D_FOUND_AT "trovato a"
|
||||
#define D_I2CSCAN_UNKNOWN_ERROR_AT "Errore sconosciuto a"
|
||||
#define D_I2CSCAN_NO_DEVICES_FOUND "Nessun dispositivo trovato"
|
||||
#define D_SYSLOG_HOST_NOT_FOUND "Syslog Host non trovato"
|
||||
|
||||
// webserver.ino
|
||||
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware - effettuare aggiornamento"
|
||||
#define D_WEBSERVER_ACTIVE_ON "Web server attivo su"
|
||||
#define D_WITH_IP_ADDRESS "con indirizzo IP"
|
||||
#define D_WEBSERVER_STOPPED "Web server arrestato"
|
||||
#define D_FILE_NOT_FOUND "File Non Trovato"
|
||||
#define D_REDIRECTED "Redirezione al captive portal"
|
||||
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Impostazione Wifimanager come AccessPoint e Station"
|
||||
#define D_WIFIMANAGER_SET_ACCESSPOINT "Impostazione Wifimanager come AccessPoint"
|
||||
#define D_TRYING_TO_CONNECT "Tentativo di connessione del dispositivo alla rete"
|
||||
|
||||
#define D_RESTART_IN "Riavvio in"
|
||||
#define D_SECONDS "secondi"
|
||||
#define D_DEVICE_WILL_RESTART "Il dispositivo verra' riavviato tra pochi secondi"
|
||||
#define D_BUTTON_TOGGLE "On/Off"
|
||||
#define D_CONFIGURATION "Configurazione"
|
||||
#define D_INFORMATION "Informazioni"
|
||||
#define D_FIRMWARE_UPGRADE "Aggiornamento Firmware"
|
||||
#define D_CONSOLE "Console"
|
||||
#define D_CONFIRM_RESTART "Conferma Riavvio"
|
||||
|
||||
#define D_CONFIGURE_MODULE "Configurazione Modulo"
|
||||
#define D_CONFIGURE_WIFI "Configurazione WiFi"
|
||||
#define D_CONFIGURE_MQTT "Configurazione MQTT"
|
||||
#define D_CONFIGURE_DOMOTICZ "Configurazione Domoticz"
|
||||
#define D_CONFIGURE_LOGGING "Configurazione Logging"
|
||||
#define D_CONFIGURE_OTHER "Configurazione Extra"
|
||||
#define D_CONFIRM_RESET_CONFIGURATION "Conferma Reset Configurazione"
|
||||
#define D_RESET_CONFIGURATION "Reset Configurazione"
|
||||
#define D_BACKUP_CONFIGURATION "Backup Configurazione"
|
||||
#define D_RESTORE_CONFIGURATION "Ripristino Configurazione"
|
||||
#define D_MAIN_MENU "Menu' Principale"
|
||||
|
||||
#define D_MODULE_PARAMETERS "Parametri del modulo"
|
||||
#define D_MODULE_TYPE "Tipo modulo"
|
||||
#define D_GPIO "GPIO"
|
||||
#define D_SERIAL_IN "Serial In"
|
||||
#define D_SERIAL_OUT "Serial Out"
|
||||
|
||||
#define D_WIFI_PARAMETERS "Parametri Wifi"
|
||||
#define D_SCAN_FOR_WIFI_NETWORKS "Scansione delle reti wifi"
|
||||
#define D_SCAN_DONE "Scansione effettuata"
|
||||
#define D_NO_NETWORKS_FOUND "Nessuna rete trovata"
|
||||
#define D_REFRESH_TO_SCAN_AGAIN "Ricarica per nuova scansione"
|
||||
#define D_DUPLICATE_ACCESSPOINT "AccessPoint duplicato"
|
||||
#define D_SKIPPING_LOW_QUALITY "Ignorato a causa di bassa qualita'"
|
||||
#define D_RSSI "RSSI"
|
||||
#define D_WEP "WEP"
|
||||
#define D_WPA_PSK "WPA PSK"
|
||||
#define D_WPA2_PSK "WPA2 PSK"
|
||||
#define D_AP1_SSID "AP1 SSId"
|
||||
#define D_AP1_PASSWORD "AP1 Password"
|
||||
#define D_AP2_SSID "AP2 SSId"
|
||||
#define D_AP2_PASSWORD "AP2 Password"
|
||||
|
||||
#define D_MQTT_PARAMETERS "Parametri MQTT"
|
||||
#define D_CLIENT "Client"
|
||||
#define D_FULL_TOPIC "Full Topic"
|
||||
|
||||
#define D_LOGGING_PARAMETERS "Parametri Logging"
|
||||
#define D_LOG_LEVEL "livello di log"
|
||||
#define D_MORE_DEBUG "Debug aggiuntivo"
|
||||
#define D_SYSLOG_HOST "Syslog host"
|
||||
#define D_SYSLOG_PORT "Syslog porta"
|
||||
#define D_TELEMETRY_PERIOD "Periodo Telemetria"
|
||||
|
||||
#define D_OTHER_PARAMETERS "Altri parametri"
|
||||
#define D_WEB_ADMIN_PASSWORD "Password Amministratore Web"
|
||||
#define D_MQTT_ENABLE "Abilita MQTT"
|
||||
#define D_FRIENDLY_NAME "Nome confidenziale"
|
||||
#define D_BELKIN_WEMO "Belkin WeMo"
|
||||
#define D_HUE_BRIDGE "Hue Bridge"
|
||||
#define D_SINGLE_DEVICE "dispositivo singolo"
|
||||
#define D_MULTI_DEVICE "dispositivo multiplo"
|
||||
|
||||
#define D_SAVE_CONFIGURATION "Salva configurazione"
|
||||
#define D_CONFIGURATION_SAVED "Configurazione salvata"
|
||||
#define D_CONFIGURATION_RESET "Configurazione azzerata"
|
||||
|
||||
#define D_PROGRAM_VERSION "Versione del programma"
|
||||
#define D_BUILD_DATE_AND_TIME "Data e ora compilazione"
|
||||
#define D_CORE_AND_SDK_VERSION "Versione Core/SDK"
|
||||
#define D_FLASH_WRITE_COUNT "Contatore scrittura Flash"
|
||||
#define D_MAC_ADDRESS "Indirizzo MAC"
|
||||
#define D_MQTT_HOST "MQTT Host"
|
||||
#define D_MQTT_PORT "MQTT Porta"
|
||||
#define D_MQTT_CLIENT "MQTT Client"
|
||||
#define D_MQTT_USER "MQTT Utente"
|
||||
#define D_MQTT_TOPIC "MQTT Topic"
|
||||
#define D_MQTT_GROUP_TOPIC "MQTT Group Topic"
|
||||
#define D_MQTT_FULL_TOPIC "MQTT Full Topic"
|
||||
#define D_MDNS_DISCOVERY "mDNS Discovery"
|
||||
#define D_MDNS_ADVERTISE "mDNS Advertise"
|
||||
#define D_ESP_CHIP_ID "ESP Chip Id"
|
||||
#define D_FLASH_CHIP_ID "Flash Chip Id"
|
||||
#define D_FLASH_CHIP_SIZE "Dimensione Flash"
|
||||
#define D_FREE_PROGRAM_SPACE "Spazio Libero Memoria Programma"
|
||||
|
||||
#define D_UPGRADE_BY_WEBSERVER "Aggiornamento da web server"
|
||||
#define D_OTA_URL "OTA Url"
|
||||
#define D_START_UPGRADE "Avvio aggiornamento"
|
||||
#define D_UPGRADE_BY_FILE_UPLOAD "Aggiornamento tramite invio file"
|
||||
#define D_UPLOAD_STARTED "Invio iniziato"
|
||||
#define D_UPGRADE_STARTED "Aggiornamento avviato"
|
||||
#define D_UPLOAD_DONE "Invio effettuato"
|
||||
#define D_UPLOAD_ERR_1 "Nessun file selezionato"
|
||||
#define D_UPLOAD_ERR_2 "Spazio insufficiente"
|
||||
#define D_UPLOAD_ERR_3 "Magic byte non corrispondente a 0xE9"
|
||||
#define D_UPLOAD_ERR_4 "Dimensione della memoria programma maggiore della dimensione reale della flash"
|
||||
#define D_UPLOAD_ERR_5 "Errore di comparazione del buffer di invio"
|
||||
#define D_UPLOAD_ERR_6 "Invio fallito. Abilitare logging 3"
|
||||
#define D_UPLOAD_ERR_7 "Invio annullato"
|
||||
#define D_UPLOAD_ERR_8 "File non valido"
|
||||
#define D_UPLOAD_ERR_9 "File troppo grande"
|
||||
#define D_UPLOAD_ERROR_CODE "Codice errore invio"
|
||||
|
||||
#define D_ENTER_COMMAND "Inserire comando"
|
||||
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Abilitare weblog 2 se e' attesa una risposta"
|
||||
#define D_NEED_USER_AND_PASSWORD "Richiesto user=<username>&password=<password>"
|
||||
|
||||
// xdrv_domoticz.ino
|
||||
#define D_DOMOTICZ_PARAMETERS "Parametri Domoticz"
|
||||
#define D_DOMOTICZ_IDX "Idx"
|
||||
#define D_DOMOTICZ_KEY_IDX "Key idx"
|
||||
#define D_DOMOTICZ_SWITCH_IDX "Switch idx"
|
||||
#define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
|
||||
#define D_DOMOTICZ_TEMP "Temp"
|
||||
#define D_DOMOTICZ_TEMP_HUM "Temp,Hum"
|
||||
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
|
||||
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
|
||||
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
|
||||
#define D_DOMOTICZ_COUNT "Count"
|
||||
#define D_DOMOTICZ_VOLTAGE "Voltage"
|
||||
#define D_DOMOTICZ_CURRENT "Current"
|
||||
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
||||
#define D_DOMOTICZ_UPDATE_TIMER "Intervallo di aggiornamento"
|
||||
|
||||
// xdrv_irremote.ino
|
||||
#define D_INVALID_JSON "JSON non valido"
|
||||
#define D_PROTOCOL_NOT_SUPPORTED "Protocollo non supportato"
|
||||
#define D_IR_PROTOCOL "PROTOCOL"
|
||||
#define D_IR_BITS "BITS"
|
||||
#define D_IR_DATA "DATA"
|
||||
#define D_IRHVAC_VENDOR "VENDOR"
|
||||
#define D_IRHVAC_POWER "POWER"
|
||||
#define D_IRHVAC_MODE "MODE"
|
||||
#define D_IRHVAC_FANSPEED "FANSPEED"
|
||||
#define D_IRHVAC_TEMP "TEMP"
|
||||
#define D_IRRECEIVED "IrReceived"
|
||||
|
||||
// xdrv_snfbridge.ino
|
||||
#define D_RFRECEIVED "RfReceived"
|
||||
#define D_START_LEARNING "Avvio apprendimento"
|
||||
#define D_SET_TO_DEFAULT "Imposta al default"
|
||||
#define D_DEFAULT_SENT "Default inviato"
|
||||
#define D_LEARNED_SENT "Apprendimento inviato"
|
||||
#define D_LEARNING_ACTIVE "Apprendimento attivo"
|
||||
#define D_LEARN_FAILED "Apprendimento fallito"
|
||||
#define D_LEARNED "Appreso"
|
||||
#define D_SAVED "Salvato"
|
||||
|
||||
// xdrv_wemohue.ino
|
||||
#define D_MULTICAST_DISABLED "Multicast disabilitato"
|
||||
#define D_MULTICAST_REJOINED "Multicast (ri)associato"
|
||||
#define D_MULTICAST_JOIN_FAILED "Associazione Multicast fallita"
|
||||
#define D_FAILED_TO_SEND_RESPONSE "Invio risposta fallito"
|
||||
|
||||
#define D_WEMO "WeMo"
|
||||
#define D_WEMO_BASIC_EVENT "WeMo evento base"
|
||||
#define D_WEMO_EVENT_SERVICE "WeMo servizio eventi"
|
||||
#define D_WEMO_SETUP "Impostazione WeMo"
|
||||
#define D_RESPONSE_SENT "Risposta inviata"
|
||||
|
||||
#define D_HUE "Hue"
|
||||
#define D_HUE_BRIDGE_SETUP "Impostazione Hue"
|
||||
#define D_HUE_API_NOT_IMPLEMENTED "Hue API non implementata"
|
||||
#define D_HUE_API "Hue API"
|
||||
#define D_HUE_POST_ARGS "Hue POST argomenti"
|
||||
#define D_3_RESPONSE_PACKETS_SENT "3 pacchetti di risposta inviati"
|
||||
|
||||
// xsns_03_energy.ino
|
||||
#define D_MAXPOWERREACHED "MaxPowerReached"
|
||||
#define D_MAXPOWERREACHEDRETRY "MaxPowerReachedRetry"
|
||||
#define D_POWERMONITOR "PowerMonitor"
|
||||
#define D_ENERGYMONITOR "EnergyMonitor"
|
||||
#define D_MAXENERGYREACHED "MaxEnergyReached"
|
||||
#define D_ENERGY_TODAY "Energia Oggi"
|
||||
#define D_ENERGY_YESTERDAY "Energia Ieri"
|
||||
#define D_ENERGY_TOTAL "Energia Totale"
|
||||
|
||||
// xsns_05_ds18b20.ino
|
||||
#define D_SENSOR_BUSY "Sensore occupato"
|
||||
#define D_SENSOR_CRC_ERROR "Sensore errore CRC"
|
||||
#define D_SENSORS_FOUND "Sensori trovati"
|
||||
|
||||
// xsns_06_dht.ino
|
||||
#define D_TIMEOUT_WAITING_FOR "Attesa timeout per"
|
||||
#define D_START_SIGNAL_LOW "inizio segnale basso"
|
||||
#define D_START_SIGNAL_HIGH "inizio segnale alto"
|
||||
#define D_PULSE "impulso"
|
||||
#define D_CHECKSUM_FAILURE "Checksum fallito"
|
||||
|
||||
// xsns_07_sht1x.ino
|
||||
#define D_SENSOR_DID_NOT_ACK_COMMAND "Sensore non ha eseguito il comando ACK"
|
||||
#define D_SHT1X_FOUND "SHT1X trovato"
|
||||
|
||||
// sonoff_template.h
|
||||
// Max string length is 8 characters including suffixes
|
||||
#define D_SENSOR_NONE "None"
|
||||
#define D_SENSOR_DHT11 "DHT11"
|
||||
#define D_SENSOR_AM2301 "AM2301"
|
||||
#define D_SENSOR_SI7021 "SI7021"
|
||||
#define D_SENSOR_DS18X20 "DS18x20"
|
||||
#define D_SENSOR_I2C_SCL "I2C SCL"
|
||||
#define D_SENSOR_I2C_SDA "I2C SDA"
|
||||
#define D_SENSOR_WS2812 "WS2812"
|
||||
#define D_SENSOR_IRSEND "IRsend"
|
||||
#define D_SENSOR_SWITCH "Switch" // Suffix "1"
|
||||
#define D_SENSOR_BUTTON "Button" // Suffix "1"
|
||||
#define D_SENSOR_RELAY "Relay" // Suffix "1i"
|
||||
#define D_SENSOR_LED "Led" // Suffix "1i"
|
||||
#define D_SENSOR_PWM "PWM" // Suffix "1"
|
||||
#define D_SENSOR_COUNTER "Counter" // Suffix "1"
|
||||
#define D_SENSOR_IRRECV "IRrecv"
|
||||
#define D_SENSOR_MHZ_RX "MHZ Rx"
|
||||
#define D_SENSOR_MHZ_TX "MHZ Tx"
|
||||
#define D_SENSOR_PZEM_RX "PZEM Rx"
|
||||
#define D_SENSOR_PZEM_TX "PZEM Tx"
|
||||
#define D_SENSOR_SAIR_RX "SAir Rx"
|
||||
#define D_SENSOR_SAIR_TX "SAir Tx"
|
||||
#define D_SENSOR_SPI_CS "SPI CS"
|
||||
#define D_SENSOR_SPI_DC "SPI DC"
|
||||
#define D_SENSOR_BACKLIGHT "BLight"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
#define D_UNIT_HOUR "Hr"
|
||||
#define D_UNIT_KILOOHM "kOhm"
|
||||
#define D_UNIT_KILOWATTHOUR "kWh"
|
||||
#define D_UNIT_LUX "lx"
|
||||
#define D_UNIT_MICROSECOND "us"
|
||||
#define D_UNIT_MILLIAMPERE "mA"
|
||||
#define D_UNIT_MILLISECOND "ms"
|
||||
#define D_UNIT_MINUTE "Min"
|
||||
#define D_UNIT_PPM "ppm"
|
||||
#define D_UNIT_PRESSURE "hPa"
|
||||
#define D_UNIT_SECOND "sec"
|
||||
#define D_UNIT_SECTORS "settori"
|
||||
#define D_UNIT_VOLT "V"
|
||||
#define D_UNIT_WATT "W"
|
||||
#define D_UNIT_WATTHOUR "Wh"
|
||||
|
||||
// Log message prefix
|
||||
#define D_LOG_APPLICATION "APP: " // Application
|
||||
#define D_LOG_BRIDGE "BRG: " // Bridge
|
||||
#define D_LOG_CONFIG "CFG: " // Settings
|
||||
#define D_LOG_COMMAND "CMD: " // Command
|
||||
#define D_LOG_DEBUG "DBG: " // Debug
|
||||
#define D_LOG_DHT "DHT: " // DHT sensor
|
||||
#define D_LOG_DOMOTICZ "DOM: " // Domoticz
|
||||
#define D_LOG_DSB "DSB: " // DS18xB20 sensor
|
||||
#define D_LOG_HTTP "HTP: " // HTTP webserver
|
||||
#define D_LOG_I2C "I2C: " // I2C
|
||||
#define D_LOG_IRR "IRR: " // Infra Red Received
|
||||
#define D_LOG_LOG "LOG: " // Logging
|
||||
#define D_LOG_MODULE "MOD: " // Module
|
||||
#define D_LOG_MDNS "DNS: " // mDNS
|
||||
#define D_LOG_MQTT "MQT: " // MQTT
|
||||
#define D_LOG_OTHER "OTH: " // Other
|
||||
#define D_LOG_RESULT "RSL: " // Result
|
||||
#define D_LOG_RFR "RFR: " // RF Received
|
||||
#define D_LOG_SERIAL "SER: " // Serial
|
||||
#define D_LOG_SHT1 "SHT: " // SHT1x sensor
|
||||
#define D_LOG_UPLOAD "UPL: " // Upload
|
||||
#define D_LOG_UPNP "UPP: " // UPnP
|
||||
#define D_LOG_WIFI "WIF: " // Wifi
|
||||
|
||||
// Result
|
||||
#define D_RSLT_RESULT "RESULT"
|
||||
#define D_RSLT_INFO "INFO"
|
||||
#define D_RSLT_STATE "STATE"
|
||||
#define D_RSLT_SENSOR "SENSOR"
|
||||
#define D_RSLT_UPTIME "UPTIME"
|
||||
#define D_RSLT_MARGINS "MARGINS"
|
||||
#define D_RSLT_WARNING "WARNING"
|
||||
#define D_RSLT_ENERGY "ENERGY"
|
||||
|
||||
// Commands
|
||||
#define D_CMND_MQTTHOST "MqttHost"
|
||||
#define D_CMND_MQTTPORT "MqttPort"
|
||||
#define D_CMND_MQTTRETRY "MqttRetry"
|
||||
#define D_CMND_STATETEXT "StateText"
|
||||
#define D_CMND_MQTTFINGERPRINT "MqttFingerprint"
|
||||
#define D_CMND_MQTTCLIENT "MqttClient"
|
||||
#define D_CMND_MQTTUSER "MqttUser"
|
||||
#define D_CMND_MQTTPASSWORD "MqttPassword"
|
||||
#define D_CMND_FULLTOPIC "FullTopic"
|
||||
#define D_CMND_PREFIX "Prefix"
|
||||
#define PRFX_MAX_STRING_LENGTH 5
|
||||
#define D_CMND "cmnd"
|
||||
#define D_STAT "stat"
|
||||
#define D_TELE "tele"
|
||||
#define D_CMND_GROUPTOPIC "GroupTopic"
|
||||
#define D_CMND_TOPIC "Topic"
|
||||
#define D_CMND_BUTTONTOPIC "ButtonTopic"
|
||||
#define D_CMND_SWITCHTOPIC "SwitchTopic"
|
||||
#define D_CMND_BUTTONRETAIN "ButtonRetain"
|
||||
#define D_CMND_SWITCHRETAIN "SwitchRetain"
|
||||
#define D_CMND_POWERRETAIN "PowerRetain"
|
||||
#define D_CMND_SENSORRETAIN "SensorRetain"
|
||||
#define D_CMND_BACKLOG "Backlog"
|
||||
#define D_CMND_DELAY "Delay"
|
||||
#define D_CMND_STATUS "Status"
|
||||
#define D_STATUS1_PARAMETER "PRM"
|
||||
#define D_STATUS2_FIRMWARE "FWR"
|
||||
#define D_STATUS3_LOGGING "LOG"
|
||||
#define D_STATUS4_MEMORY "MEM"
|
||||
#define D_STATUS5_NETWORK "NET"
|
||||
#define D_STATUS6_MQTT "MQT"
|
||||
#define D_STATUS7_TIME "TIM"
|
||||
#define D_STATUS8_POWER "PWR"
|
||||
#define D_STATUS9_MARGIN "PTH"
|
||||
#define D_STATUS10_SENSOR "SNS"
|
||||
#define D_STATUS11_STATUS "STS"
|
||||
#define D_CMND_POWER "Power"
|
||||
#define D_RSLT_POWER "POWER"
|
||||
#define D_CMND_POWERONSTATE "PowerOnState"
|
||||
#define D_CMND_PULSETIME "PulseTime"
|
||||
#define D_CMND_BLINKTIME "BlinkTime"
|
||||
#define D_CMND_BLINKCOUNT "BlinkCount"
|
||||
#define D_CMND_SAVEDATA "SaveData"
|
||||
#define D_CMND_SETOPTION "SetOption"
|
||||
#define D_CMND_TEMPERATURE_RESOLUTION "TempRes"
|
||||
#define D_CMND_HUMIDITY_RESOLUTION "HumRes"
|
||||
#define D_CMND_PRESSURE_RESOLUTION "PressRes"
|
||||
#define D_CMND_POWER_RESOLUTION "WattRes"
|
||||
#define D_CMND_VOLTAGE_RESOLUTION "VoltRes"
|
||||
#define D_CMND_CURRENT_RESOLUTION "AmpRes"
|
||||
#define D_CMND_ENERGY_RESOLUTION "EnergyRes"
|
||||
#define D_CMND_MODULE "Module"
|
||||
#define D_CMND_MODULES "Modules"
|
||||
#define D_CMND_GPIO "GPIO"
|
||||
#define D_NOT_SUPPORTED "Not supported"
|
||||
#define D_CMND_GPIOS "GPIOs"
|
||||
#define D_CMND_PWM "PWM"
|
||||
#define D_CMND_PWMFREQUENCY "PWMFrequency"
|
||||
#define D_CMND_PWMRANGE "PWMRange"
|
||||
#define D_CMND_COUNTER "Counter"
|
||||
#define D_CMND_COUNTERTYPE "CounterType"
|
||||
#define D_CMND_COUNTERDEBOUNCE "CounterDebounce"
|
||||
#define D_CMND_SLEEP "Sleep"
|
||||
#define D_CMND_UPLOAD "Upload"
|
||||
#define D_CMND_UPGRADE "Upgrade"
|
||||
#define D_ONE_OR_GT "1 or >%s to upgrade"
|
||||
#define D_CMND_OTAURL "OtaUrl"
|
||||
#define D_CMND_SERIALLOG "SerialLog"
|
||||
#define D_CMND_SYSLOG "SysLog"
|
||||
#define D_CMND_LOGHOST "LogHost"
|
||||
#define D_CMND_LOGPORT "LogPort"
|
||||
#define D_CMND_IPADDRESS "IPAddress"
|
||||
#define D_CMND_NTPSERVER "NtpServer"
|
||||
#define D_CMND_AP "Ap"
|
||||
#define D_CMND_SSID "SSId"
|
||||
#define D_CMND_PASSWORD "Password"
|
||||
#define D_CMND_HOSTNAME "Hostname"
|
||||
#define D_CMND_WIFICONFIG "WifiConfig"
|
||||
#define WCFG_MAX_STRING_LENGTH 12
|
||||
#define D_WCFG_0_RESTART "Restart"
|
||||
#define D_WCFG_1_SMARTCONFIG "SmartConfig"
|
||||
#define D_WCFG_2_WIFIMANAGER "WifiManager"
|
||||
#define D_WCFG_3_WPSCONFIG "WPSConfig"
|
||||
#define D_WCFG_4_RETRY "Retry"
|
||||
#define D_WCFG_5_WAIT "Wait"
|
||||
#define D_CMND_FRIENDLYNAME "FriendlyName"
|
||||
#define D_CMND_SWITCHMODE "SwitchMode"
|
||||
#define D_CMND_WEBSERVER "Webserver"
|
||||
#define D_WEBSERVER_MODE "WebServerMode"
|
||||
#define D_ACTIVE_FOR "Active for"
|
||||
#define D_ON_DEVICE "on"
|
||||
#define D_CMND_WEBPASSWORD "WebPassword"
|
||||
#define D_CMND_WEBLOG "WebLog"
|
||||
#define D_CMND_EMULATION "Emulation"
|
||||
#define D_CMND_TELEPERIOD "TelePeriod"
|
||||
#define D_CMND_RESTART "Restart"
|
||||
#define D_ONE_TO_RESTART "1 to restart"
|
||||
#define D_CMND_RESET "Reset"
|
||||
#define D_RESET_AND_RESTARTING "Reset and Restarting"
|
||||
#define D_ONE_TO_RESET "1 to reset"
|
||||
#define D_CMND_TIMEZONE "Timezone"
|
||||
#define D_CMND_ALTITUDE "Altitude"
|
||||
#define D_CMND_LEDPOWER "LedPower"
|
||||
#define D_CMND_LEDSTATE "LedState"
|
||||
#define D_CMND_CFGDUMP "CfgDump"
|
||||
#define D_CMND_I2CSCAN "I2CScan"
|
||||
#define D_CMND_INA219MODE "Ina219Mode"
|
||||
#define D_CMND_EXCEPTION "Exception"
|
||||
|
||||
// Commands xdrv_domoticz.ino
|
||||
#define D_CMND_DOMOTICZ "Domoticz"
|
||||
#define D_CMND_IDX "Idx"
|
||||
#define D_CMND_KEYIDX "KeyIdx"
|
||||
#define D_CMND_SWITCHIDX "SwitchIdx"
|
||||
#define D_CMND_SENSORIDX "SensorIdx"
|
||||
#define D_CMND_UPDATETIMER "UpdateTimer"
|
||||
|
||||
// Commands xdrv_irremote.ino
|
||||
#define D_CMND_IRSEND "IRSend"
|
||||
#define D_CMND_IRHVAC "IRHVAC"
|
||||
|
||||
// Commands xdrv_light.ino
|
||||
#define D_CMND_COLOR "Color"
|
||||
#define D_CMND_COLORTEMPERATURE "CT"
|
||||
#define D_CMND_DIMMER "Dimmer"
|
||||
#define D_CMND_LED "Led"
|
||||
#define D_CMND_LEDTABLE "LedTable"
|
||||
#define D_CMND_FADE "Fade"
|
||||
#define D_CMND_PIXELS "Pixels"
|
||||
#define D_CMND_SCHEME "Scheme"
|
||||
#define D_CMND_SPEED "Speed"
|
||||
#define D_CMND_WAKEUP "Wakeup"
|
||||
#define D_CMND_WAKEUPDURATION "WakeUpDuration"
|
||||
#define D_CMND_WIDTH "Width"
|
||||
|
||||
// Commands xdrv_snfbridge.ino
|
||||
#define D_CMND_RFCODE "RfCode"
|
||||
#define D_CMND_RFHIGH "RfHigh"
|
||||
#define D_CMND_RFHOST "RfHost"
|
||||
#define D_CMND_RFKEY "RfKey"
|
||||
#define D_CMND_RFLOW "RfLow"
|
||||
#define D_CMND_RFSYNC "RfSync"
|
||||
|
||||
// Commands xsns_03_energy.ino
|
||||
#define D_CMND_POWERLOW "PowerLow"
|
||||
#define D_CMND_POWERHIGH "PowerHigh"
|
||||
#define D_CMND_VOLTAGELOW "VoltageLow"
|
||||
#define D_CMND_VOLTAGEHIGH "VoltageHigh"
|
||||
#define D_CMND_CURRENTLOW "CurrentLow"
|
||||
#define D_CMND_CURRENTHIGH "CurrentHigh"
|
||||
#define D_CMND_ENERGYRESET "EnergyReset"
|
||||
#define D_CMND_HLWPCAL "HlwPcal"
|
||||
#define D_CMND_HLWPSET "HlwPset"
|
||||
#define D_CMND_HLWUCAL "HlwUcal"
|
||||
#define D_CMND_HLWUSET "HlwUset"
|
||||
#define D_CMND_HLWICAL "HlwIcal"
|
||||
#define D_CMND_HLWISET "HlwIset"
|
||||
#define D_CMND_MAXPOWER "MaxPower"
|
||||
#define D_CMND_MAXPOWERHOLD "MaxPowerHold"
|
||||
#define D_CMND_MAXPOWERWINDOW "MaxPowerWindow"
|
||||
#define D_CMND_SAFEPOWER "SafePower"
|
||||
#define D_CMND_SAFEPOWERHOLD "SafePowerHold"
|
||||
#define D_CMND_SAFEPOWERWINDOW "SafePowerWindow"
|
||||
#define D_CMND_MAXENERGY "MaxEnergy"
|
||||
#define D_CMND_MAXENERGYSTART "MaxEnergyStart"
|
||||
|
||||
#endif // _LANGUAGE_EN_GB_H_
|
||||
|
|
@ -43,9 +43,9 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
|||
uint32_t pwm_control : 1; // bit 15 (v5.8.1)
|
||||
uint32_t ws_clock_reverse : 1; // bit 16 (v5.8.1)
|
||||
uint32_t decimal_text : 1; // bit 17 (v5.8.1)
|
||||
uint32_t spare18 : 1;
|
||||
uint32_t light_signal : 1; // bit 18 (v5.10.0c)
|
||||
uint32_t spare19 : 1;
|
||||
uint32_t voltage_resolution : 1;
|
||||
uint32_t voltage_resolution : 1; // Replaced by below
|
||||
uint32_t spare21 : 1;
|
||||
uint32_t spare22 : 1;
|
||||
uint32_t spare23 : 1;
|
||||
|
|
|
|||
|
|
@ -21,6 +21,10 @@
|
|||
#define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional)
|
||||
#endif
|
||||
|
||||
#ifndef EMULATION
|
||||
#define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
|
||||
#endif
|
||||
|
||||
/*********************************************************************************************\
|
||||
* RTC memory
|
||||
\*********************************************************************************************/
|
||||
|
|
|
|||
|
|
@ -25,8 +25,8 @@
|
|||
- Select IDE Tools - Flash Size: "1M (no SPIFFS)"
|
||||
====================================================*/
|
||||
|
||||
#define VERSION 0x050A0003
|
||||
#define VERSION_STRING "5.10.0c" // Would be great to have a macro that fills this from VERSION ...
|
||||
#define VERSION 0x050A0005
|
||||
#define VERSION_STRING "5.10.0e" // Would be great to have a macro that fills this from VERSION ...
|
||||
|
||||
// Location specific includes
|
||||
#include "sonoff.h" // Enumaration used in user_config.h
|
||||
|
|
@ -986,7 +986,7 @@ void MqttDataCallback(char* topic, byte* data, unsigned int data_len)
|
|||
}
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, (Settings.save_data > 1) ? stemp1 : GetStateText(Settings.save_data));
|
||||
}
|
||||
else if ((CMND_SETOPTION == command_code) && ((index >= 0) && (index <= 17)) || ((index > 31) && (index <= P_MAX_PARAM8 +31))) {
|
||||
else if ((CMND_SETOPTION == command_code) && ((index >= 0) && (index <= 18)) || ((index > 31) && (index <= P_MAX_PARAM8 +31))) {
|
||||
if (index <= 31) {
|
||||
ptype = 0; // SetOption0 .. 31
|
||||
} else {
|
||||
|
|
@ -1012,6 +1012,7 @@ void MqttDataCallback(char* topic, byte* data, unsigned int data_len)
|
|||
case 14: // interlock
|
||||
case 16: // ws_clock_reverse
|
||||
case 17: // decimal_text
|
||||
case 18: // light_signal
|
||||
bitWrite(Settings.flag.data, index, payload);
|
||||
}
|
||||
if (12 == index) { // stop_flash_rotate
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@
|
|||
//#define MY_LANGUAGE nl-NL // Dutch in the Netherlands
|
||||
//#define MY_LANGUAGE de-DE // German in Germany
|
||||
//#define MY_LANGUAGE pl-PL // Polish in Poland
|
||||
//#define MY_LANGUAGE it-IT // Italian in Italy
|
||||
|
||||
// -- Project -------------------------------------
|
||||
#define PROJECT "sonoff" // PROJECT is used as the default topic delimiter and OTA file name
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
#define WEB_USERNAME "admin" // Web server Admin mode user name
|
||||
#define WEB_PASSWORD "" // [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)
|
||||
#define FRIENDLY_NAME "Sonoff" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
|
||||
#define USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+11k code, +2k mem)
|
||||
#define USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
|
||||
#define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
|
||||
|
||||
// -- mDNS ----------------------------------------
|
||||
|
|
@ -163,17 +164,16 @@
|
|||
// -- Sensor code selection -----------------------
|
||||
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
|
||||
//#define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
||||
#define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
||||
|
||||
// WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors
|
||||
//#define USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
||||
//#define USE_DS18x20_LEGACY // Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)
|
||||
|
||||
// -- I2C sensors ---------------------------------
|
||||
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
||||
#define USE_SHT // Add I2C emulating code for SHT1X sensor (+1k4 code)
|
||||
// #define USE_SHT3X // Add I2C code for SHT3x sensor based on Adafruit (+0k7 code)
|
||||
// #define USE_SHT3X_V2 // Add I2C code for SHT3x sensor based on EspEasy (+0k7 code)
|
||||
// #define USE_SHT3X_V3 // Add I2C code for SHT3x sensor based on Wemos (+0k7 code)
|
||||
#define USE_SHT3X // Add I2C code for SHT3x sensor (+0k6 code)
|
||||
#define USE_HTU // Add I2C code for HTU21/SI7013/SI7020/SI7021 sensor (+1k5 code)
|
||||
#define USE_BMP // Add I2C code for BMP085/BMP180/BMP280/BME280 sensor (+4k code)
|
||||
// #define USE_BME680 // Add additional support for BME680 sensor using Adafruit Sensor and BME680 libraries (+6k code)
|
||||
|
|
@ -184,6 +184,12 @@
|
|||
// #define USE_ADS1115_I2CDEV // Add I2C code for ADS1115 16 bit A/D converter using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)
|
||||
// #define USE_INA219 // Add I2C code for INA219 Low voltage and current sensor (+1k code)
|
||||
|
||||
// -- Carbon dioxide (CO2) sensors ----------------
|
||||
#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
||||
#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
||||
#define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
||||
#define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
||||
|
||||
#define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
|
||||
// #define USE_IR_HVAC // Support for HVAC system using IR (+2k code)
|
||||
#define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
|
||||
|
|
@ -192,9 +198,6 @@
|
|||
#define USE_WS2812_CTYPE 1 // WS2812 Color type (0 - RGB, 1 - GRB, 2 - RGBW, 3 - GRBW)
|
||||
// #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow
|
||||
|
||||
//#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
||||
//#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
||||
|
||||
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code)
|
||||
|
||||
/*********************************************************************************************\
|
||||
|
|
|
|||
|
|
@ -93,6 +93,7 @@ uint8_t light_entry_color[5];
|
|||
uint8_t light_current_color[5];
|
||||
uint8_t light_new_color[5];
|
||||
uint8_t light_last_color[5];
|
||||
uint8_t light_signal_color[5];
|
||||
|
||||
uint8_t light_wheel = 0;
|
||||
uint8_t light_subtype = 0;
|
||||
|
|
@ -451,7 +452,11 @@ void LightSetDimmer(uint8_t myDimmer)
|
|||
}
|
||||
float dimmer = 100 / (float)myDimmer;
|
||||
for (byte i = 0; i < light_subtype; i++) {
|
||||
if (Settings.flag.light_signal) {
|
||||
temp = (float)light_signal_color[i] / dimmer;
|
||||
} else {
|
||||
temp = (float)Settings.light_color[i] / dimmer;
|
||||
}
|
||||
light_current_color[i] = (uint8_t)temp;
|
||||
}
|
||||
}
|
||||
|
|
@ -474,6 +479,34 @@ void LightSetColor()
|
|||
}
|
||||
}
|
||||
|
||||
void LightSetSignal(uint16_t lo, uint16_t hi, uint16_t value)
|
||||
{
|
||||
/* lo - below lo is green
|
||||
hi - above hi is red
|
||||
*/
|
||||
if (Settings.flag.light_signal) {
|
||||
uint16_t signal = 0;
|
||||
if (value > lo) {
|
||||
signal = (value - lo) * 10 / ((hi - lo) * 10 / 256);
|
||||
if (signal > 255) {
|
||||
signal = 255;
|
||||
}
|
||||
}
|
||||
// snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DEBUG "Light signal %d"), signal);
|
||||
// AddLog(LOG_LEVEL_DEBUG);
|
||||
light_signal_color[0] = signal;
|
||||
light_signal_color[1] = 255 - signal;
|
||||
light_signal_color[2] = 0;
|
||||
light_signal_color[3] = 0;
|
||||
light_signal_color[4] = 0;
|
||||
|
||||
Settings.light_scheme = 0;
|
||||
if (!Settings.light_dimmer) {
|
||||
Settings.light_dimmer = 20;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
char* LightGetColor(uint8_t type, char* scolor)
|
||||
{
|
||||
LightSetDimmer(Settings.light_dimmer);
|
||||
|
|
@ -969,32 +1002,36 @@ boolean LightCommand(char *type, uint16_t index, char *dataBuf, uint16_t data_le
|
|||
char option = (1 == data_len) ? dataBuf[0] : '\0';
|
||||
|
||||
int command_code = GetCommandCode(command, sizeof(command), type, kLightCommands);
|
||||
if ((CMND_COLOR == command_code) && (light_subtype > LST_SINGLE) && (index > 0) && (index <= 4)) {
|
||||
if ((CMND_COLOR == command_code) && (light_subtype > LST_SINGLE) && (index > 0) && (index <= 5)) {
|
||||
if (data_len > 0) {
|
||||
valid_entry = LightColorEntry(dataBuf, data_len);
|
||||
if (valid_entry) {
|
||||
if (1 == index) { // Color(1)
|
||||
if (index <= 2) { // Color(1), 2
|
||||
memcpy(light_current_color, light_entry_color, sizeof(light_current_color));
|
||||
uint8_t dimmer = Settings.light_dimmer;
|
||||
LightSetColor();
|
||||
if (2 == index) {
|
||||
Settings.light_dimmer = dimmer;
|
||||
}
|
||||
Settings.light_scheme = 0;
|
||||
coldim = true;
|
||||
} else { // Color2, 3 and 4
|
||||
} else { // Color3, 4 and 5
|
||||
for (byte i = 0; i < LST_RGB; i++) {
|
||||
Settings.ws_color[index -2][i] = light_entry_color[i];
|
||||
Settings.ws_color[index -3][i] = light_entry_color[i];
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
if (!valid_entry && (1 == index)) {
|
||||
if (!valid_entry && (index <= 2)) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, LightGetColor(0, scolor));
|
||||
}
|
||||
if (index > 1) {
|
||||
if (index >= 3) {
|
||||
scolor[0] = '\0';
|
||||
for (byte i = 0; i < LST_RGB; i++) {
|
||||
if (Settings.flag.decimal_text) {
|
||||
snprintf_P(scolor, 25, PSTR("%s%s%d"), scolor, (i > 0) ? "," : "", Settings.ws_color[index -2][i]);
|
||||
snprintf_P(scolor, 25, PSTR("%s%s%d"), scolor, (i > 0) ? "," : "", Settings.ws_color[index -3][i]);
|
||||
} else {
|
||||
snprintf_P(scolor, 25, PSTR("%s%02X"), scolor, Settings.ws_color[index -2][i]);
|
||||
snprintf_P(scolor, 25, PSTR("%s%02X"), scolor, Settings.ws_color[index -3][i]);
|
||||
}
|
||||
}
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, scolor);
|
||||
|
|
|
|||
|
|
@ -241,6 +241,8 @@ void PollUdp()
|
|||
\*********************************************************************************************/
|
||||
|
||||
const char WEMO_EVENTSERVICE_XML[] PROGMEM =
|
||||
/*
|
||||
// Original
|
||||
"<?scpd xmlns=\"urn:Belkin:service-1-0\"?>"
|
||||
"<actionList>"
|
||||
"<action>"
|
||||
|
|
@ -268,9 +270,91 @@ const char WEMO_EVENTSERVICE_XML[] PROGMEM =
|
|||
"</action>"
|
||||
"</scpd>\r\n"
|
||||
"\r\n";
|
||||
*/
|
||||
|
||||
/*
|
||||
// XosePerez version 20171108 - v2.3.0
|
||||
"<?xml version=\"1.0\"?>"
|
||||
"<scpd xmlns=\"urn:Belkin:service-1-0\">"
|
||||
"<specVersion><major>1</major><minor>0</minor></specVersion>"
|
||||
"<actionList>"
|
||||
"<action>"
|
||||
"<name>SetBinaryState</name>"
|
||||
"<argumentList>"
|
||||
"<argument>"
|
||||
"<retval />"
|
||||
"<name>BinaryState</name>"
|
||||
"<relatedStateVariable>BinaryState</relatedStateVariable>"
|
||||
"<direction>in</direction>"
|
||||
"</argument>"
|
||||
"</argumentList>"
|
||||
"</action>"
|
||||
"<action>"
|
||||
"<name>GetBinaryState</name>"
|
||||
"<argumentList>"
|
||||
"<argument>"
|
||||
"<retval/>"
|
||||
"<name>BinaryState</name>"
|
||||
"<relatedStateVariable>BinaryState</relatedStateVariable>"
|
||||
"<direction>out</direction>"
|
||||
"</argument>"
|
||||
"</argumentList>"
|
||||
"</action>"
|
||||
"</actionList>"
|
||||
"<serviceStateTable>"
|
||||
"<stateVariable sendEvents=\"yes\">"
|
||||
"<name>BinaryState</name>"
|
||||
"<dataType>Boolean</dataType>"
|
||||
"<defaultValue>0</defaultValue>"
|
||||
"</stateVariable>"
|
||||
"</serviceStateTable>"
|
||||
"</scpd>";
|
||||
*/
|
||||
|
||||
// Reloxx13 from #1357
|
||||
"<?scpd xmlns=\"urn:Belkin:service-1-0\"?>"
|
||||
"<actionList>"
|
||||
"<action>"
|
||||
"<name>SetBinaryState</name>"
|
||||
"<argumentList>"
|
||||
"<argument>"
|
||||
"<retval/>"
|
||||
"<name>BinaryState</name>"
|
||||
"<relatedStateVariable>BinaryState</relatedStateVariable>"
|
||||
"<direction>in</direction>"
|
||||
"</argument>"
|
||||
"</argumentList>"
|
||||
"<serviceStateTable>"
|
||||
"<stateVariable sendEvents=\"yes\">"
|
||||
"<name>BinaryState</name>"
|
||||
"<dataType>Boolean</dataType>"
|
||||
"<defaultValue>0</defaultValue>"
|
||||
"</stateVariable>"
|
||||
"<stateVariable sendEvents=\"yes\">"
|
||||
"<name>level</name>"
|
||||
"<dataType>string</dataType>"
|
||||
"<defaultValue>0</defaultValue>"
|
||||
"</stateVariable>"
|
||||
"</serviceStateTable>"
|
||||
"</action>"
|
||||
"<action>"
|
||||
"<name>GetBinaryState</name>"
|
||||
"<argumentList>"
|
||||
"<argument>"
|
||||
"<retval/>"
|
||||
"<name>BinaryState</name>"
|
||||
"<relatedStateVariable>BinaryState</relatedStateVariable>"
|
||||
"<direction>out</direction>"
|
||||
"</argument>"
|
||||
"</argumentList>"
|
||||
"</action>"
|
||||
"</actionList>"
|
||||
"</scpd>\r\n"
|
||||
"\r\n";
|
||||
|
||||
const char WEMO_RESPONSE_STATE_SOAP[] PROGMEM =
|
||||
"<s:Envelope xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\">"
|
||||
// Reloxx13 from #1357
|
||||
"<s:Envelope xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\" s:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\">"
|
||||
"<s:Body>"
|
||||
"<u:SetBinaryStateResponse xmlns:u=\"urn:Belkin:service:basicevent:1\">"
|
||||
"<BinaryState>{x1</BinaryState>"
|
||||
|
|
@ -281,7 +365,7 @@ const char WEMO_RESPONSE_STATE_SOAP[] PROGMEM =
|
|||
|
||||
const char WEMO_SETUP_XML[] PROGMEM =
|
||||
"<?xml version=\"1.0\"?>"
|
||||
"<root>"
|
||||
"<root xmlns=\"urn:Belkin:device-1-0\">"
|
||||
"<device>"
|
||||
"<deviceType>urn:Belkin:device:controllee:1</deviceType>"
|
||||
"<friendlyName>{x1</friendlyName>"
|
||||
|
|
@ -301,14 +385,14 @@ const char WEMO_SETUP_XML[] PROGMEM =
|
|||
"</service>"
|
||||
"</serviceList>"
|
||||
"</device>"
|
||||
"</root>\r\n"
|
||||
"\r\n";
|
||||
"</root>";
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void HandleUpnpEvent()
|
||||
{
|
||||
AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, PSTR(D_WEMO_BASIC_EVENT));
|
||||
|
||||
String request = WebServer->arg(0);
|
||||
String state_xml = FPSTR(WEMO_RESPONSE_STATE_SOAP);
|
||||
//differentiate get and set state
|
||||
|
|
@ -321,7 +405,7 @@ void HandleUpnpEvent()
|
|||
}
|
||||
}
|
||||
else if(request.indexOf(F("GetBinaryState")) > 0){
|
||||
state_xml.replace("Set", "Get");
|
||||
state_xml.replace(F("Set"), F("Get"));
|
||||
}
|
||||
state_xml.replace("{x1", String(bitRead(power, devices_present -1)));
|
||||
WebServer->send(200, FPSTR(HDR_CTYPE_XML), state_xml);
|
||||
|
|
@ -330,6 +414,7 @@ void HandleUpnpEvent()
|
|||
void HandleUpnpService()
|
||||
{
|
||||
AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, PSTR(D_WEMO_EVENT_SERVICE));
|
||||
|
||||
WebServer->send(200, FPSTR(HDR_CTYPE_PLAIN), FPSTR(WEMO_EVENTSERVICE_XML));
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -22,8 +22,6 @@
|
|||
/*********************************************************************************************\
|
||||
* SHT3X - Temperature and Humidy
|
||||
*
|
||||
* Required library: none but based on Adafruit Industries SHT31 library
|
||||
*
|
||||
* I2C Address: 0x44 or 0x45
|
||||
\*********************************************************************************************/
|
||||
|
||||
|
|
@ -34,14 +32,6 @@ uint8_t sht3x_type = 0;
|
|||
uint8_t sht3x_address;
|
||||
uint8_t sht3x_addresses[] = { SHT3X_ADDR_GND, SHT3X_ADDR_VDD };
|
||||
|
||||
bool Sht3xConvert()
|
||||
{
|
||||
if (sht3x_type) {
|
||||
return I2cWrite8(sht3x_address, 0x2C, 0x06);
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
bool Sht3xRead(float &t, float &h)
|
||||
{
|
||||
unsigned int data[6];
|
||||
|
|
@ -49,22 +39,20 @@ bool Sht3xRead(float &t, float &h)
|
|||
t = NAN;
|
||||
h = NAN;
|
||||
|
||||
Wire.requestFrom(sht3x_address, (uint8_t)6);
|
||||
if (Wire.available() != 6) {
|
||||
Wire.beginTransmission(sht3x_address);
|
||||
Wire.write(0x2C); // Enable clock stretching
|
||||
Wire.write(0x06); // High repeatability
|
||||
if (Wire.endTransmission() != 0) { // Stop I2C transmission
|
||||
return false;
|
||||
}
|
||||
// Read 6 bytes of data
|
||||
// cTemp msb, cTemp lsb, cTemp crc, humidity msb, humidity lsb, humidity crc
|
||||
for (uint8_t i = 0; i < 6; i++) {
|
||||
data[i] = Wire.read();
|
||||
}
|
||||
// delay(50);
|
||||
// if (Wire.available() != 0) {
|
||||
// return false;
|
||||
// }
|
||||
delay(30); // Timing verified with logic analyzer (10 is to short)
|
||||
Wire.requestFrom(sht3x_address, (uint8_t)6); // Request 6 bytes of data
|
||||
for (int i = 0; i < 6; i++) {
|
||||
data[i] = Wire.read(); // cTemp msb, cTemp lsb, cTemp crc, humidity msb, humidity lsb, humidity crc
|
||||
};
|
||||
t = ConvertTemp((float)((((data[0] << 8) | data[1]) * 175) / 65535.0) - 45);
|
||||
h = (float)((((data[3] << 8) | data[4]) * 100) / 65535.0);
|
||||
return true;
|
||||
return (!isnan(t) && !isnan(h));
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
|
@ -75,10 +63,12 @@ void Sht3xDetect()
|
|||
return;
|
||||
}
|
||||
|
||||
float t;
|
||||
float h;
|
||||
sht3x_type = 1;
|
||||
for (byte i = 0; i < sizeof(sht3x_addresses); i++) {
|
||||
sht3x_address = sht3x_addresses[i];
|
||||
if (Sht3xConvert()) {
|
||||
if (Sht3xRead(t, h)) {
|
||||
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "SHT3X", sht3x_address);
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
return;
|
||||
|
|
@ -128,16 +118,12 @@ boolean Xsns14(byte function)
|
|||
case FUNC_INIT:
|
||||
Sht3xDetect();
|
||||
break;
|
||||
case FUNC_PREP_BEFORE_TELEPERIOD:
|
||||
Sht3xConvert();
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
Sht3xShow(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_WEB_APPEND:
|
||||
Sht3xShow(0);
|
||||
Sht3xConvert();
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,142 +0,0 @@
|
|||
/*
|
||||
xsns_14_sht3x.ino - SHT3X temperature and humidity sensor support for Sonoff-Tasmota
|
||||
|
||||
Copyright (C) 2018 Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifdef USE_I2C
|
||||
#ifdef USE_SHT3X_V2
|
||||
/*********************************************************************************************\
|
||||
* SHT3X - Temperature and Humidy
|
||||
*
|
||||
* Required library: none but based on EspEasy plugin 68
|
||||
*
|
||||
* I2C Address: 0x44 or 0x45
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define SHT3X_ADDR_GND 0x44 // address pin low (GND)
|
||||
#define SHT3X_ADDR_VDD 0x45 // address pin high (VDD)
|
||||
|
||||
uint8_t sht3x_type = 0;
|
||||
uint8_t sht3x_address;
|
||||
uint8_t sht3x_addresses[] = { SHT3X_ADDR_GND, SHT3X_ADDR_VDD };
|
||||
|
||||
bool Sht3xInit()
|
||||
{
|
||||
if (sht3x_type) {
|
||||
return I2cWrite8(sht3x_address, 0x20, 0x32); // Periodic 0.5mps and repeatability high
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
bool Sht3xRead(float &t, float &h)
|
||||
{
|
||||
unsigned int data[6];
|
||||
|
||||
t = NAN;
|
||||
h = NAN;
|
||||
|
||||
I2cWrite8(sht3x_address, 0xE0, 0x00); // Fetch data
|
||||
Wire.requestFrom(sht3x_address, (uint8_t)6);
|
||||
if (Wire.available() != 6) {
|
||||
return false;
|
||||
}
|
||||
// Read 6 bytes of data
|
||||
// cTemp msb, cTemp lsb, cTemp crc, humidity msb, humidity lsb, humidity crc
|
||||
for (uint8_t i = 0; i < 6; i++) {
|
||||
data[i] = Wire.read();
|
||||
}
|
||||
t = ConvertTemp((float)((((data[0] << 8) | data[1]) * 175) / 65535.0) - 45);
|
||||
h = (float)((((data[3] << 8) | data[4]) * 100) / 65535.0);
|
||||
return true;
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Sht3xDetect()
|
||||
{
|
||||
if (sht3x_type) {
|
||||
return;
|
||||
}
|
||||
|
||||
sht3x_type = 1;
|
||||
for (byte i = 0; i < sizeof(sht3x_addresses); i++) {
|
||||
sht3x_address = sht3x_addresses[i];
|
||||
if (Sht3xInit()) {
|
||||
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "SHT3X", sht3x_address);
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
return;
|
||||
}
|
||||
}
|
||||
sht3x_type = 0;
|
||||
}
|
||||
|
||||
void Sht3xShow(boolean json)
|
||||
{
|
||||
if (sht3x_type) {
|
||||
float t;
|
||||
float h;
|
||||
if (Sht3xRead(t, h)) {
|
||||
char temperature[10];
|
||||
char humidity[10];
|
||||
dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
|
||||
dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
|
||||
|
||||
if (json) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, "SHT3X", temperature, humidity);
|
||||
#ifdef USE_DOMOTICZ
|
||||
DomoticzTempHumSensor(temperature, humidity);
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "SHT3X", temperature, TempUnit());
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, "SHT3X", humidity);
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Interface
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XSNS_14
|
||||
|
||||
boolean Xsns14(byte function)
|
||||
{
|
||||
boolean result = false;
|
||||
|
||||
if (i2c_flg) {
|
||||
switch (function) {
|
||||
case FUNC_INIT:
|
||||
Sht3xDetect();
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
Sht3xShow(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_WEB_APPEND:
|
||||
Sht3xShow(0);
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
#endif // USE_SHT3X_V2
|
||||
#endif // USE_I2C
|
||||
|
|
@ -1,156 +0,0 @@
|
|||
/*
|
||||
xsns_14_sht3x.ino - SHT3X temperature and humidity sensor support for Sonoff-Tasmota
|
||||
|
||||
Copyright (C) 2018 Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifdef USE_I2C
|
||||
#ifdef USE_SHT3X_V3
|
||||
/*********************************************************************************************\
|
||||
* SHT3X - Temperature and Humidy
|
||||
*
|
||||
* Required library: none but based on Wemos library
|
||||
*
|
||||
* I2C Address: 0x44 or 0x45
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define SHT3X_ADDR_GND 0x44 // address pin low (GND)
|
||||
#define SHT3X_ADDR_VDD 0x45 // address pin high (VDD)
|
||||
|
||||
uint8_t sht3x_type = 0;
|
||||
uint8_t sht3x_address;
|
||||
uint8_t sht3x_addresses[] = { SHT3X_ADDR_GND, SHT3X_ADDR_VDD };
|
||||
|
||||
bool Sht3xConvert()
|
||||
{
|
||||
if (sht3x_type) {
|
||||
// Start I2C Transmission
|
||||
Wire.beginTransmission(sht3x_address);
|
||||
// Send measurement command
|
||||
Wire.write(0x2C);
|
||||
Wire.write(0x06);
|
||||
// Stop I2C transmission
|
||||
if (Wire.endTransmission() != 0) {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
bool Sht3xRead(float &t, float &h)
|
||||
{
|
||||
unsigned int data[6];
|
||||
|
||||
t = NAN;
|
||||
h = NAN;
|
||||
|
||||
// Request 6 bytes of data
|
||||
Wire.requestFrom(sht3x_address, (uint8_t)6);
|
||||
// Read 6 bytes of data
|
||||
// cTemp msb, cTemp lsb, cTemp crc, humidity msb, humidity lsb, humidity crc
|
||||
for (int i = 0; i < 6; i++) {
|
||||
data[i] = Wire.read();
|
||||
};
|
||||
delay(50);
|
||||
if (Wire.available() != 0) {
|
||||
return false;
|
||||
}
|
||||
// Convert the data
|
||||
t = ConvertTemp((float)((((data[0] << 8) | data[1]) * 175) / 65535.0) - 45);
|
||||
h = (float)((((data[3] << 8) | data[4]) * 100) / 65535.0);
|
||||
return true;
|
||||
}
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void Sht3xDetect()
|
||||
{
|
||||
if (sht3x_type) {
|
||||
return;
|
||||
}
|
||||
|
||||
sht3x_type = 1;
|
||||
for (byte i = 0; i < sizeof(sht3x_addresses); i++) {
|
||||
sht3x_address = sht3x_addresses[i];
|
||||
if (Sht3xConvert()) {
|
||||
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "SHT3X", sht3x_address);
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
return;
|
||||
}
|
||||
}
|
||||
sht3x_type = 0;
|
||||
}
|
||||
|
||||
void Sht3xShow(boolean json)
|
||||
{
|
||||
if (sht3x_type) {
|
||||
float t;
|
||||
float h;
|
||||
if (Sht3xRead(t, h)) {
|
||||
char temperature[10];
|
||||
char humidity[10];
|
||||
dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
|
||||
dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
|
||||
|
||||
if (json) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, "SHT3X", temperature, humidity);
|
||||
#ifdef USE_DOMOTICZ
|
||||
DomoticzTempHumSensor(temperature, humidity);
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "SHT3X", temperature, TempUnit());
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, "SHT3X", humidity);
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Interface
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XSNS_14
|
||||
|
||||
boolean Xsns14(byte function)
|
||||
{
|
||||
boolean result = false;
|
||||
|
||||
if (i2c_flg) {
|
||||
switch (function) {
|
||||
case FUNC_INIT:
|
||||
Sht3xDetect();
|
||||
break;
|
||||
case FUNC_PREP_BEFORE_TELEPERIOD:
|
||||
Sht3xConvert();
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
Sht3xShow(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_WEB_APPEND:
|
||||
Sht3xShow(0);
|
||||
Sht3xConvert();
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
#endif // USE_SHT3X_V3
|
||||
#endif // USE_I2C
|
||||
|
|
@ -54,11 +54,18 @@ enum MhzFilterOptions {MHZ19_FILTER_OFF, MHZ19_FILTER_OFF_ALLSAMPLES, MHZ19_FILT
|
|||
|
||||
#include <TasmotaSerial.h>
|
||||
|
||||
TasmotaSerial *MhzSerial;
|
||||
#ifndef CO2_LOW
|
||||
#define CO2_LOW 800 // Below this CO2 value show green light
|
||||
#endif
|
||||
#ifndef CO2_HIGH
|
||||
#define CO2_HIGH 1200 // Above this CO2 value show red light
|
||||
#endif
|
||||
|
||||
#define MHZ19_READ_TIMEOUT 500 // Must be way less than 1000
|
||||
#define MHZ19_RETRY_COUNT 8
|
||||
|
||||
TasmotaSerial *MhzSerial;
|
||||
|
||||
const char kMhzTypes[] PROGMEM = "MHZ19|MHZ19B";
|
||||
|
||||
const uint8_t mhz_cmnd_read_ppm[9] = {0xFF, 0x01, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79};
|
||||
|
|
@ -180,6 +187,7 @@ void Mhz50ms()
|
|||
mhz_type = (s) ? 1 : 2;
|
||||
if (MhzCheckAndApplyFilter(ppm, s)) {
|
||||
mhz_retry = MHZ19_RETRY_COUNT;
|
||||
LightSetSignal(CO2_LOW, CO2_HIGH, mhz_last_ppm);
|
||||
|
||||
if (0 == s || 64 == s) { // Reading is stable.
|
||||
if (mhz_abc_must_apply) {
|
||||
|
|
|
|||
|
|
@ -26,6 +26,13 @@
|
|||
|
||||
#include <TasmotaSerial.h>
|
||||
|
||||
#ifndef CO2_LOW
|
||||
#define CO2_LOW 800 // Below this CO2 value show green light
|
||||
#endif
|
||||
#ifndef CO2_HIGH
|
||||
#define CO2_HIGH 1200 // Above this CO2 value show red light
|
||||
#endif
|
||||
|
||||
TasmotaSerial *SensairSerial;
|
||||
|
||||
const char kSenseairTypes[] PROGMEM = "Kx0|S8";
|
||||
|
|
@ -131,6 +138,7 @@ void Senseair50ms() // Every 50 mSec
|
|||
break;
|
||||
case 2: // 0x03 (3) READ_CO2 - fe 04 02 06 2c af 59
|
||||
senseair_co2 = value;
|
||||
LightSetSignal(CO2_LOW, CO2_HIGH, senseair_co2);
|
||||
break;
|
||||
case 3: // 0x04 (4) READ_TEMPERATURE - S8: fe 84 02 f2 f1 - Illegal Data Address
|
||||
senseair_temperature = ConvertTemp((float)value / 100);
|
||||
|
|
|
|||
Loading…
Reference in New Issue