Prep for release

Prep for release

README.md

@@ -15,7 +15,7 @@ If you like **Sonoff-Tasmota**, give it a star, or fork it and contribute!
 ### Development
 [![Build Status](https://img.shields.io/travis/arendst/Sonoff-Tasmota.svg)](https://travis-ci.org/arendst/Sonoff-Tasmota)
 
-Current version is **6.1.1.x** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for release information and [sonoff/_changelog.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_changelog.ino) for change information.
+Current version is **6.1.1.x** - See [RELEASENOTES.md](https://github.com/arendst/Sonoff-Tasmota/blob/development/RELEASENOTES.md) for release information and [sonoff/_changelog.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_changelog.ino) for change information.
 
 ### Disclaimer
 :warning: **DANGER OF ELECTROCUTION** :warning:
@@ -90,15 +90,6 @@ The following devices are supported:
 - [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
 - Wemos D1 mini, NodeMcu and Ledunia
 
-### Firmware Release Information
-Different firmware images are released based on Features and Sensors selection guided by code and memory usage. All versions support web based WIFI manager configuration.
-
-- The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should **NOT be used for initial installation**.
-- The Classic version allows **initial installation** and single OTA uploads.
-- The Sonoff version removes WPS and SmartConfig configuration and allows more sensors.
-- The Sensors version removes WPS and SmartConfig configuration and allows more usefull sensors.
-- The Knx version removes WPS and SmartConfig configuration and some other features but adds KNX support.
-
 #### Available Features and Sensors
 
 | Feature or Sensor              | sonoff | classic | minimal | knx  | sensors |
@@ -188,6 +179,7 @@ You can contribute to Sonoff-Tasmota by
 #### Libraries Used
 Libraries used with Sonoff-Tasmota are:
 - [ESP8266 core for Arduino](https://github.com/esp8266/Arduino)
+- [Adafruit CCS811](https://github.com/adafruit/Adafruit_CCS811)
 - [Adafruit SGP30](https://github.com/adafruit/Adafruit_SGP30)
 - [ArduinoJson](https://arduinojson.org/)
 - [Bosch BME680](https://github.com/BoschSensortec/BME680_driver)

RELEASENOTES.md

@@ -0,0 +1,35 @@
+## Migration Information
+See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
+
+1. Migrate to **Sonoff-Tasmota 3.9.x**
+2. Migrate to **Sonoff-Tasmota 4.x**
+3. Migrate to **Sonoff-Tasmota 5.14**
+4. Migrate to **Sonoff-Tasmota 6.x**
+
+## Release notes
+### Change in default initial configuration tool
+Firmware binary **sonoff-classic.bin** supports **WifiManager, Wps and SmartConfig** for initial configuration. The default tools is Wps.
+
+To save memory space all other binaries support **WifiManager only**.
+
+See _changelog.ino how to enable them again.
+- Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured.
+- If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used.
+- While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in user_config.h the compiler will check for define USE_WPS and if not enabled WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible.
+
+## Provided Binary Downloads
+The following binary downloads have been compiled with ESP8266/Arduino library version **2.3.0**
+
+- **sonoff-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**.
+- **sonoff-classic.bin** = The Classic version allows **initial installation** using either WifiManager, Wps or SmartConfig.
+- **sonoff.bin** = The Sonoff version without Wps and SmartConfig configuration but adds more sensors.
+- **sonoff-BG.bin** to **sonoff-TW.bin** = The Sonoff version without Wps and SmartConfig configuration in different languages.
+- **sonoff-sensors.bin** = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors.
+- **sonoff-knx.bin** = The Knx version without Wps and SmartConfig configuration and some other features but adds KNX support.
+
+See [Tasmota ESP/Arduino library version related issues](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips#20180523---relation-tasmota-and-esp8266arduino-core-version) why these files are still released using ESP/Arduino library version v2.3.0.
+
+## Changelog
+Version 6.2.0 20180901
+
+tbd

sonoff/_releasenotes.ino

@@ -1,16 +0,0 @@
-/*
-6.1.1b 20180715
-** Change default initial wifi config tool **
-Default initial wifi config tool has changed from WPS to Wifi Manager (local Access Point).
-Both WPS and Wifi Smartconfig are now optional and are disabled in user_config.h saving a massive 66k of code space.
-See _changelog.ino how to enable them again.
-Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured.
-If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used.
-While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in user_config.h the compiler will check for define USE_WPS and if not enabled
-  WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled
-  WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled
-  WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible.
-
-** Introduction _changelog.ino **
-Finally the changes can be found in a changelog where they belong. Release info will now be in _releasenotes.ino
-*/

sonoff/settings.h

@@ -22,7 +22,7 @@
 
 #define PARAM8_SIZE  18                    // Number of param bytes (SetOption)
 
-typedef union {                            // Restricted by MISRA-C Rule 18.4 but so usefull...
+typedef union {                            // Restricted by MISRA-C Rule 18.4 but so useful...
   uint32_t data;                           // Allow bit manipulation using SetOption
   struct {                                 // SetOption0 .. SetOption31
     uint32_t save_state : 1;               // bit 0
@@ -60,7 +60,7 @@ typedef union {                            // Restricted by MISRA-C Rule 18.4 bu
   };
 } SysBitfield;
 
-typedef union {                            // Restricted by MISRA-C Rule 18.4 but so usefull...
+typedef union {                            // Restricted by MISRA-C Rule 18.4 but so useful...
   uint32_t data;                           // Allow bit manipulation using SetOption
   struct {                                 // SetOption50 .. SetOption81
     uint32_t timers_enable : 1;            // bit 0 (v6.1.1b)
@@ -371,7 +371,7 @@ struct XDRVMAILBOX {
 } XdrvMailbox;
 
 #define MAX_RULES_FLAG  7                  // Number of bits used in RulesBitfield (tricky I know...)
-typedef union {                            // Restricted by MISRA-C Rule 18.4 but so usefull...
+typedef union {                            // Restricted by MISRA-C Rule 18.4 but so useful...
   uint16_t data;                           // Allow bit manipulation
   struct {
     uint16_t system_boot : 1;

sonoff/sonoff_post.h

@@ -55,7 +55,7 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 
 /*********************************************************************************************\
  * [sonoff-sensors.bin]
- * Provide an image with usefull supported sensors enabled
+ * Provide an image with useful supported sensors enabled
 \*********************************************************************************************/
 
 #ifdef USE_SENSORS

sonoff/user_config.h

@@ -373,10 +373,10 @@
 //#define USE_CLASSIC                              // Create sonoff-classic (See sonoff_post.h for selected features)
 
 /*********************************************************************************************\
- * Select usefull sensors - overrides above undefines!!
+ * Select useful sensors - overrides above undefines!!
 \*********************************************************************************************/
 
-//#define USE_SENSORS                              // Create sonoff-sensors with usefull sensors enabled (See sonoff_post.h for selected sensors)
+//#define USE_SENSORS                              // Create sonoff-sensors with useful sensors enabled (See sonoff_post.h for selected sensors)
 
 /*********************************************************************************************\
  * Select KNX without Emulation to save space