mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Fix Shelly 2.5 negative power values on relay 1 regression from 9.5.0.5 

Fix Shelly 2.5 negative power values on relay 1 regression from 9.5.0.5 (#12943)
This commit is contained in:
Theo Arends 2021-08-23 16:18:21 +02:00
parent aa6af84693
commit 74b24298bd
3 changed files with 18 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
CHANGELOG.md
View File

@ -10,6 +10,7 @@ All notable changes to this project will be documented in this file.
### Fixed
- WDT reset on shutters with stepper motors during deceleration (#12849)
- Shelly 2.5 negative power values on relay 1 regression from 9.5.0.5
## [9.5.0.6] 20210820
### Added

2
tasmota/tasmota_template.h
View File

@ -639,7 +639,7 @@ const uint16_t kGpioNiceList[] PROGMEM = {
AGPIO(GPIO_HJL_CF), // HJL-01/BL0937 CF power
#endif
#if defined(USE_I2C) && defined(USE_ADE7953)
AGPIO(GPIO_ADE7953_IRQ), // ADE7953 IRQ
AGPIO(GPIO_ADE7953_IRQ) + 2, // ADE7953 IRQ
#endif
#ifdef USE_CSE7761
AGPIO(GPIO_CSE7761_TX), // CSE7761 Serial interface (Dual R3)

16
tasmota/xnrg_07_ade7953.ino
View File

@ -21,7 +21,10 @@
#ifdef USE_ENERGY_SENSOR
#ifdef USE_ADE7953
/*********************************************************************************************\
* ADE7953 - Energy (Shelly 2.5)
* ADE7953 - Energy used in Shelly 2.5 (model 0) and Shelly EM (model 1)
*
* {"NAME":"Shelly 2.5","GPIO":[320,0,32,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18}
* {"NAME":"Shelly EM","GPIO":[0,0,0,0,0,0,0,0,640,3457,608,224,0,1],"FLAG":0,"BASE":18}
*
* Based on datasheet from https://www.analog.com/en/products/ade7953.html
*
@ -69,6 +72,7 @@ struct Ade7953 {
uint32_t current_rms[2] = { 0, 0 };
uint32_t active_power[2] = { 0, 0 };
uint8_t init_step = 0;
uint8_t model = 0; // 0 = Shelly 2.5, 1 = Shelly EM
} Ade7953;
int Ade7953RegSize(uint16_t reg)
@ -182,13 +186,15 @@ void Ade7953GetData(void)
for (uint32_t channel = 0; channel < 2; channel++) {
Energy.data_valid[channel] = 0;
Energy.active_power[channel] = (float)Ade7953.active_power[channel] / (Settings->energy_power_calibration / 10);
Energy.reactive_power[channel] = (float)reactive_power[channel] / (Settings->energy_power_calibration / 10);
if (1 == Ade7953.model) { // Shelly EM
if ((acc_mode & APSIGN[channel]) != 0) {
Energy.active_power[channel] = Energy.active_power[channel] * -1;
}
Energy.reactive_power[channel] = (float)reactive_power[channel] / (Settings->energy_power_calibration / 10);
if ((acc_mode & VARSIGN[channel]) != 0) {
Energy.reactive_power[channel] = Energy.reactive_power[channel] * -1;
}
}
Energy.apparent_power[channel] = (float)apparent_power[channel] / (Settings->energy_power_calibration / 10);
if (0 == Energy.active_power[channel]) {
Energy.current[channel] = 0;
@ -223,8 +229,10 @@ void Ade7953EnergyEverySecond(void)
void Ade7953DrvInit(void)
{
if (PinUsed(GPIO_ADE7953_IRQ)) { // Irq on GPIO16 is not supported...
pinMode(Pin(GPIO_ADE7953_IRQ), INPUT); // Related to resetPins() - Must be set to input
if (PinUsed(GPIO_ADE7953_IRQ, GPIO_ANY)) { // Irq on GPIO16 is not supported...
uint32_t pin_irq = Pin(GPIO_ADE7953_IRQ, GPIO_ANY);
pinMode(pin_irq, INPUT); // Related to resetPins() - Must be set to input
Ade7953.model = GetPin(pin_irq) - AGPIO(GPIO_ADE7953_IRQ); // 0 .. 1 ;
delay(100); // Need 100mS to init ADE7953
if (I2cSetDevice(ADE7953_ADDR)) {
if (HLW_PREF_PULSE == Settings->energy_power_calibration) {