Update changelogs

CHANGELOG.md

@@ -13,6 +13,7 @@ All notable changes to this project will be documented in this file.
 - TasMesh support for LWT messages (#20392)
 - Show calculated heat index if temperature and humidity is available with ``#define USE_HEAT_INDEX`` (#4771)
 - Berry add explicit error log when memory allocation fails (#20807)
+- Support for AMS5915/AMS6915 temperature and pressure sensors (#20814)
 
 ### Breaking Changed
 
@@ -27,7 +28,7 @@ All notable changes to this project will be documented in this file.
 ### Fixed
 - ESP32 PWM activity on unconfigured PWM GPIOs (#20732)
 - Shutter inverted using internal commands (#20752)
-- HASPmota PSRAM memory leak
+- HASPmota PSRAM memory leak (#20818)
 
 ### Removed
 

CODE_OWNERS.md

@@ -84,7 +84,7 @@ In addition to @arendst the following code is mainly owned by:
 | xdrv_70_1_hdmi_cec           | @s-hadinger
 | xdrv_71_magic_switch         | @barbudor
 | xdrv_72_pipsolar             | @chefpro
-| xdrv_73                      |
+| xdrv_73_lora                 | @arendst
 | xdrv_74                      |
 | xdrv_75                      |
 | xdrv_76                      |
@@ -107,6 +107,7 @@ In addition to @arendst the following code is mainly owned by:
 |                              |
 | xdrv_121_gpioviewer          | @arendst
 | xdrv_122_file_settings_demo  | @arendst
+| xdrv_122_file_json_settings_demo | @arendst
 | xdrv_127_debug               | @arendst
 |                              |
 | Tasmota Sensors              |
@@ -224,6 +225,12 @@ In addition to @arendst the following code is mainly owned by:
 | xsns_108_tc74                | Michael Loftis
 | xsns_109_sgp4x               | Andrew Klaus
 | xsns_110_max17043            | Vincent de Groot
+| xsns_111_ens16x              | Christoph Friese
+| xsns_112_ens210              | Christoph Friese
+| xsns_113_hc8                 | Daniel Maier
+| xsns_114_amsx915             | Bastian Urschel
+|                              |
+| xsns_127_esp32_sensors       | @arendst
 |                              |
 | Libraries                    |
 |                              |

RELEASENOTES.md

@@ -119,6 +119,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 ## Changelog v13.4.0.1
 ### Added
 - Experimental support for LoRa
+- Support for AMS5915/AMS6915 temperature and pressure sensors [#20814](https://github.com/arendst/Tasmota/issues/20814)
 - Show calculated heat index if temperature and humidity is available with ``#define USE_HEAT_INDEX`` [#4771](https://github.com/arendst/Tasmota/issues/4771)
 - TasMesh support for LWT messages [#20392](https://github.com/arendst/Tasmota/issues/20392)
 - QMC5883l check for overflow and scale reading [#20643](https://github.com/arendst/Tasmota/issues/20643)
@@ -140,5 +141,6 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 ### Fixed
 - Shutter inverted using internal commands [#20752](https://github.com/arendst/Tasmota/issues/20752)
 - ESP32 PWM activity on unconfigured PWM GPIOs [#20732](https://github.com/arendst/Tasmota/issues/20732)
+- HASPmota PSRAM memory leak [#20818](https://github.com/arendst/Tasmota/issues/20818)
 
 ### Removed

tasmota/my_user_config.h

@@ -732,13 +732,13 @@
 //  #define USE_PCA9557                            // [I2cDriver81] Enable PCA9557 8-bit I/O Expander (I2C addresses 0x18 - 0x1F) (+2k5 code)
 //  #define USE_MAX17043                           // [I2cDriver83] Enable MAX17043 fuel-gauge systems Lipo batteries sensor (I2C address 0x36) (+0k9 code)
 //  #define MAX17043_ALERT_THRESHOLD 32            // [I2cDriver83] Define the alert threshold for low battery level percentage 1-32
+//  #define USE_AMSX915                            // [I2CDriver86] Enable AMS5915/AMS6915 pressure/temperature sensor (+1k2 code)
 
 //  #define USE_RTC_CHIPS                          // Enable RTC chip support and NTP server - Select only one
 //    #define USE_DS3231                           // [I2cDriver26] Enable DS3231 RTC (I2C address 0x68) (+1k2 code)
 //    #define DS3231_ENABLE_TEMP                   //   In DS3231 driver, enable the internal temperature sensor
 //    #define USE_BM8563                           // [I2cDriver59] Enable BM8563 RTC - found in M5Stack - support both I2C buses on ESP32 (I2C address 0x51) (+2.5k code)
 //    #define USE_PCF85363                         // [I2cDriver66] Enable PCF85363 RTC - found Shelly 3EM (I2C address 0x51) (+0k7 code)
-//    #define USE_AMSX915                          // [I2CDriver86] Enable AMS5915/AMS6915 pressure/temperature sensor (+1k2 code)
 
 //  #define USE_DISPLAY                            // Add I2C/TM1637/MAX7219 Display Support (+2k code)
     #define USE_DISPLAY_MODES1TO5                // Enable display mode 1 to 5 in addition to mode 0

tasmota/tasmota_support/support_features.ino

@@ -906,8 +906,12 @@ constexpr uint32_t feature[] = {
 #ifdef USE_GPIO_VIEWER
   0x00000004 |  // xdrv_121_gpioviewer.ino
 #endif
-//  0x00000008 |  // 
+#if defined(USE_I2C) && defined(USE_AMSX915)
-//  0x00000010 |  // 
+  0x00000008 |  // xsns_114_amsx915.ino
+#endif
+#if defined(USE_SPI) && defined(USE_SPI_LORA)
+  0x00000010 |  // xdrv_73_9_lora.ino
+#endif
 //  0x00000020 |  // 
 //  0x00000040 |  // 
 //  0x00000080 |  // 

tools/decode-status.py

@@ -304,8 +304,8 @@ a_features = [[
     "USE_SGP4X","USE_MAX17043","USE_ENS16x","USE_ENS210",
     "USE_HC8","USE_HDMI_CEC","USE_BLE_ESP32","USE_MATTER_DEVICE"
     ],[
-    "USE_MAGIC_SWITCH","USE_PIPSOLAR","USE_GPIO_VIEWER","",
+    "USE_MAGIC_SWITCH","USE_PIPSOLAR","USE_GPIO_VIEWER","USE_AMSX915",
-    "","","","",
+    "USE_SPI_LORA","","","",
     "","","","",
     "","","","",
     "","","","",
@@ -339,7 +339,7 @@ else:
         obj = json.load(fp)
 
 def StartDecode():
-    print ("\n*** decode-status.py v13.3.0.5 by Theo Arends and Jacek Ziolkowski ***")
+    print ("\n*** decode-status.py v13.4.0.1 by Theo Arends and Jacek Ziolkowski ***")
 
 #    print("Decoding\n{}".format(obj))