Add reset after four Quick Power Cycles

Add reset after four Quick Power Cycles (#6639)

sonoff/settings.ino

@@ -360,6 +360,36 @@ void SettingsSaveAll(void)
   SettingsSave(0);
 }
 
+/*********************************************************************************************\
+ * Quick power cycle monitoring
+\*********************************************************************************************/
+
+void UpdateQuickPowerCycle(bool update)
+{
+  uint32_t pc_register;
+  uint32_t pc_location = SETTINGS_LOCATION - CFG_ROTATES;
+
+  ESP.flashRead(pc_location * SPI_FLASH_SEC_SIZE, (uint32*)&pc_register, sizeof(pc_register));
+  if (update && ((pc_register & 0xFFFFFFF0) == 0xFFA55AB0)) {
+    uint32_t counter = ((pc_register & 0xF) << 1) & 0xF;
+    if (0 == counter) {  // 4 power cycles in a row
+      SettingsErase(2);  // Quickly reset all settings including QuickPowerCycle flag
+      EspRestart();      // And restart
+    } else {
+      pc_register = 0xFFA55AB0 | counter;
+      ESP.flashWrite(pc_location * SPI_FLASH_SEC_SIZE, (uint32*)&pc_register, sizeof(pc_register));
+//      AddLog_P2(LOG_LEVEL_DEBUG, PSTR("QPC: Flag %02X"), counter);  // Won't show as too early in power on sequence
+    }
+  }
+  else if (pc_register != 0xFFA55ABF) {
+    pc_register = 0xFFA55ABF;
+    // Assume flash is default all ones and setting a bit to zero does not need an erase
+    ESP.flashEraseSector(pc_location);
+    ESP.flashWrite(pc_location * SPI_FLASH_SEC_SIZE, (uint32*)&pc_register, sizeof(pc_register));
+//    AddLog_P2(LOG_LEVEL_DEBUG, PSTR("QPC: Reset"));  // Won't show as too early in power on sequence
+  }
+}
+
 /*********************************************************************************************\
  * Config Save - Save parameters to Flash ONLY if any parameter has changed
 \*********************************************************************************************/
@@ -486,6 +516,7 @@ void SettingsErase(uint8_t type)
   /*
     0 = Erase from program end until end of physical flash
     1 = Erase SDK parameter area at end of linker memory model (0x0FDxxx - 0x0FFFFF) solving possible wifi errors
+    2 = Erase Tasmota settings
   */
 
 #ifndef FIRMWARE_MINIMAL
@@ -497,6 +528,10 @@ void SettingsErase(uint8_t type)
     _sectorStart = SETTINGS_LOCATION +2;  // SDK parameter area above EEPROM area (0x0FDxxx - 0x0FFFFF)
     _sectorEnd = SETTINGS_LOCATION +5;
   }
+  else if (2 == type) {
+    _sectorStart = SETTINGS_LOCATION - CFG_ROTATES;  // Tasmota parameter area (0x0F4xxx - 0x0FBFFF)
+    _sectorEnd = SETTINGS_LOCATION +1;
+  }
 
   bool _serialoutput = (LOG_LEVEL_DEBUG_MORE <= seriallog_level);
 

sonoff/sonoff.ino

@@ -781,6 +781,7 @@ void PerformEverySecond(void)
   if (BOOT_LOOP_TIME == uptime) {
     RtcReboot.fast_reboot_count = 0;
     RtcRebootSave();
+    UpdateQuickPowerCycle(false);
 
     Settings.bootcount++;              // Moved to here to stop flash writes during start-up
     AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_BOOT_COUNT " %d"), Settings.bootcount);
@@ -1471,7 +1472,10 @@ void setup(void)
   global_state.data = 3;  // Init global state (wifi_down, mqtt_down) to solve possible network issues
 
   RtcRebootLoad();
-  if (!RtcRebootValid()) { RtcReboot.fast_reboot_count = 0; }
+  if (!RtcRebootValid()) {
+    RtcReboot.fast_reboot_count = 0;
+    UpdateQuickPowerCycle(true);  // As RTC is invalid it must be a power cycle
+  }
   RtcReboot.fast_reboot_count++;
   RtcRebootSave();
 
@@ -1545,6 +1549,8 @@ void setup(void)
     }
   }
 
+//  UpdateQuickPowerCycle(true);  // Test location
+
   Format(mqtt_client, Settings.mqtt_client, sizeof(mqtt_client));
   Format(mqtt_topic, Settings.mqtt_topic, sizeof(mqtt_topic));
   if (strstr(Settings.hostname, "%") != nullptr) {