mirror of https://github.com/arendst/Tasmota.git
Merge pull request #4991 from gsimon75/sm16716
Add support for the SM16716 RGB LED controller
This commit is contained in:
Theo Arends
GitHub
commit
78b2bd3bd5
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -481,6 +481,7 @@
|
|||
#define D_TX20_SOUTH "S"
|
||||
#define D_TX20_WEST "W"
|
||||
|
||||
|
||||
// sonoff_template.h - keep them as short as possible to be able to fit them in GUI drop down box
|
||||
#define D_SENSOR_NONE "Geen"
|
||||
#define D_SENSOR_DHT11 "DHT11"
|
||||
|
|
@ -555,6 +556,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -481,6 +481,7 @@
|
|||
#define D_TX20_SOUTH "S"
|
||||
#define D_TX20_WEST "W"
|
||||
|
||||
|
||||
// sonoff_template.h - keep them as short as possible to be able to fit them in GUI drop down box
|
||||
#define D_SENSOR_NONE "Brak"
|
||||
#define D_SENSOR_DHT11 "DHT11"
|
||||
|
|
@ -555,6 +556,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "А"
|
||||
|
|
|
|||
|
|
@ -481,6 +481,7 @@
|
|||
#define D_TX20_SOUTH "J"
|
||||
#define D_TX20_WEST "Z"
|
||||
|
||||
|
||||
// sonoff_template.h - keep them as short as possible to be able to fit them in GUI drop down box
|
||||
#define D_SENSOR_NONE "Žiaden"
|
||||
#define D_SENSOR_DHT11 "DHT11"
|
||||
|
|
@ -555,6 +556,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "A"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "А"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "安"
|
||||
|
|
|
|||
|
|
@ -555,6 +555,9 @@
|
|||
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
||||
#define D_SENSOR_PN532_TX "PN532 Tx"
|
||||
#define D_SENSOR_PN532_RX "PN532 Rx"
|
||||
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
||||
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
||||
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
||||
|
||||
// Units
|
||||
#define D_UNIT_AMPERE "安"
|
||||
|
|
|
|||
|
|
@ -418,6 +418,8 @@
|
|||
// #define USE_THEO_V2 // Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver (+1k4 code)
|
||||
// #define USE_ALECTO_V2 // Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 weather stations using 868MHz RF sensor receiver (+1k7 code)
|
||||
|
||||
#define USE_SM16716 // Add support for SM16716 RGB LED controller (+0k7 code)
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Debug features are only supported in development branch
|
||||
\*********************************************************************************************/
|
||||
|
|
|
|||
|
|
@ -168,6 +168,8 @@ typedef unsigned long power_t; // Power (Relay) type
|
|||
#define NEO_RGBW 5 // Neopixel RGBW leds
|
||||
#define NEO_GRBW 6 // Neopixel GRBW leds
|
||||
|
||||
#define LT_SM16716 16 // Lights that use SM16716 will have this bit set in light_type
|
||||
|
||||
#define MQTT_PUBSUBCLIENT 1 // Mqtt PubSubClient library
|
||||
#define MQTT_TASMOTAMQTT 2 // Mqtt TasmotaMqtt library based on esp-mqtt-arduino - soon obsolete
|
||||
#define MQTT_ESPMQTTARDUINO 3 // Mqtt esp-mqtt-arduino library by Ingo Randolf - obsolete but define is present for debugging purposes
|
||||
|
|
|
|||
|
|
@ -2429,6 +2429,12 @@ void GpioInit(void)
|
|||
light_type = LT_WS2812;
|
||||
}
|
||||
#endif // USE_WS2812
|
||||
#ifdef USE_SM16716
|
||||
if (SM16716_ModuleSelected()) {
|
||||
light_type += 3;
|
||||
light_type |= LT_SM16716;
|
||||
}
|
||||
#endif // ifdef USE_SM16716
|
||||
if (!light_type) {
|
||||
for (uint8_t i = 0; i < MAX_PWMS; i++) { // Basic PWM control only
|
||||
if (pin[GPIO_PWM1 +i] < 99) {
|
||||
|
|
|
|||
|
|
@ -164,6 +164,9 @@ enum UserSelectablePins {
|
|||
GPIO_MCP39F5_RST, // MCP39F501 Reset (Shelly2)
|
||||
GPIO_PN532_TXD, // PN532 NFC Serial Tx
|
||||
GPIO_PN532_RXD, // PN532 NFC Serial Rx
|
||||
GPIO_SM16716_CLK, // SM16716 CLOCK
|
||||
GPIO_SM16716_DAT, // SM16716 DATA
|
||||
GPIO_SM16716_SEL, // SM16716 SELECT
|
||||
GPIO_SENSOR_END };
|
||||
|
||||
// Programmer selectable GPIO functionality offset by user selectable GPIOs
|
||||
|
|
@ -229,7 +232,8 @@ const char kSensorNames[] PROGMEM =
|
|||
D_SENSOR_BUTTON "1in|" D_SENSOR_BUTTON "2in|" D_SENSOR_BUTTON "3in|" D_SENSOR_BUTTON "4in|"
|
||||
D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|"
|
||||
D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|"
|
||||
D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX
|
||||
D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|"
|
||||
D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER
|
||||
;
|
||||
|
||||
/********************************************************************************************/
|
||||
|
|
@ -304,6 +308,7 @@ enum SupportedModules {
|
|||
MI_DESK_LAMP,
|
||||
SP10,
|
||||
WAGA,
|
||||
SYF05,
|
||||
MAXMODULE };
|
||||
|
||||
/********************************************************************************************/
|
||||
|
|
@ -553,6 +558,18 @@ const uint8_t kGpioNiceList[] PROGMEM = {
|
|||
GPIO_MAX31855CLK, // MAX31855 Serial interface
|
||||
GPIO_MAX31855DO, // MAX31855 Serial interface
|
||||
#endif
|
||||
#ifdef USE_SM16716
|
||||
GPIO_SM16716_CLK, // SM16716 CLOCK
|
||||
GPIO_SM16716_DAT, // SM16716 DATA
|
||||
GPIO_SM16716_SEL, // SM16716 SELECT
|
||||
#endif // USE_SM16716
|
||||
#if defined(USE_ENERGY_SENSOR) && defined(USE_HLW8012)
|
||||
GPIO_NRG_SEL, // HLW8012/HLJ-01 Sel output (1 = Voltage)
|
||||
GPIO_NRG_SEL_INV, // HLW8012/HLJ-01 Sel output (0 = Voltage)
|
||||
GPIO_NRG_CF1, // HLW8012/HLJ-01 CF1 voltage / current
|
||||
GPIO_HLW_CF, // HLW8012 CF power
|
||||
GPIO_HJL_CF, // HJL-01/BL0937 CF power
|
||||
#endif
|
||||
};
|
||||
|
||||
const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = {
|
||||
|
|
@ -623,7 +640,8 @@ const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = {
|
|||
PHILIPS,
|
||||
YTF_IR_BRIDGE,
|
||||
WITTY, // Development Devices
|
||||
WEMOS
|
||||
WEMOS,
|
||||
SYF05
|
||||
};
|
||||
|
||||
// Default module settings
|
||||
|
|
@ -1863,6 +1881,31 @@ const mytmplt kModules[MAXMODULE] PROGMEM = {
|
|||
GPIO_NRG_CF1, // GPIO14 HJL-01 CF1 voltage / current
|
||||
GPIO_LED1_INV, // GPIO15 Blue LED - Link status
|
||||
0, 0
|
||||
},
|
||||
{ "SYF05", // Sunyesmart SYF05 (a.k.a. Fcmila) = TYWE3S + SM16726
|
||||
// Also works with Merkury 904 RGBW Bulbs with 13 set to GPIO_SM16716_SEL
|
||||
// https://www.flipkart.com/fc-mila-bxav-xs-ad-smart-bulb/p/itmf85zgs45fzr7n
|
||||
// https://docs.tuya.com/en/hardware/WiFi-module/wifi-e3s-module.html
|
||||
// http://www.datasheet-pdf.com/PDF/SM16716-Datasheet-Sunmoon-932771
|
||||
GPIO_USER, // GPIO00 N.C.
|
||||
0,
|
||||
GPIO_USER, // GPIO02 N.C.
|
||||
0,
|
||||
GPIO_SM16716_CLK, // GPIO04 SM16716 Clock
|
||||
GPIO_PWM1, // GPIO05 White
|
||||
// GPIO06
|
||||
// GPIO07
|
||||
// GPIO08
|
||||
0, // GPIO09
|
||||
0, // GPIO10
|
||||
// GPIO11
|
||||
GPIO_USER, // GPIO12 Alt. White on some devices
|
||||
GPIO_USER, // GPIO13 SM16716 Enable on some devices
|
||||
GPIO_SM16716_DAT, // GPIO14 SM16716 Data
|
||||
0, // GPIO15 wired to GND
|
||||
GPIO_USER, // GPIO16 N.C.
|
||||
GPIO_FLAG_ADC0 // ADC0 A0 Analog input
|
||||
// + GPIO_FLAG_PULLUP // Allow input pull-up control
|
||||
}
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -177,8 +177,10 @@ void GetFeatures(void)
|
|||
#ifdef USE_ARMTRONIX_DIMMERS
|
||||
feature_drv2 |= 0x00020000; // xdrv_18_armtronixdimmer.ino
|
||||
#endif
|
||||
#ifdef USE_SM16716
|
||||
feature_drv2 |= 0x00040000; // xdrv_04_light.ino
|
||||
#endif
|
||||
|
||||
// feature_drv2 |= 0x00040000;
|
||||
// feature_drv2 |= 0x00080000;
|
||||
// feature_drv2 |= 0x00100000;
|
||||
// feature_drv2 |= 0x00200000;
|
||||
|
|
|
|||
|
|
@ -32,6 +32,9 @@
|
|||
* 11 +WS2812 RGB(W) no (One WS2812 RGB or RGBW ledstrip)
|
||||
* 12 AiLight RGBW no
|
||||
* 13 Sonoff B1 RGBCW yes
|
||||
* 19 SM16716 RGB no
|
||||
* 20 SM16716+W RGBW no
|
||||
* 21 SM16716+CW RGBCW yes
|
||||
*
|
||||
* light_scheme WS2812 3+ Colors 1+2 Colors Effect
|
||||
* ------------ ------ --------- ---------- -----------------
|
||||
|
|
@ -354,6 +357,117 @@ void LightMy92x1Duty(uint8_t duty_r, uint8_t duty_g, uint8_t duty_b, uint8_t dut
|
|||
os_delay_us(12); // TStop > 12us.
|
||||
}
|
||||
|
||||
#ifdef USE_SM16716
|
||||
/*********************************************************************************************\
|
||||
* SM16716 - Controlling RGB over a synchronous serial line
|
||||
* Copyright (C) 2019 Gabor Simon
|
||||
*
|
||||
* Source: https://community.home-assistant.io/t/cheap-uk-wifi-bulbs-with-tasmota-teardown-help-tywe3s/40508/27
|
||||
*
|
||||
\*********************************************************************************************/
|
||||
|
||||
// Enable this for debug logging
|
||||
//#define D_LOG_SM16716 "SM16716: "
|
||||
|
||||
uint8_t sm16716_pin_clk = 100;
|
||||
uint8_t sm16716_pin_dat = 100;
|
||||
uint8_t sm16716_pin_sel = 100;
|
||||
uint8_t sm16716_enabled = 0;
|
||||
|
||||
void SM16716_SendBit(uint8_t v)
|
||||
{
|
||||
/* NOTE:
|
||||
* According to the spec sheet, max freq is 30 MHz, that is 16.6 ns per high/low half of the
|
||||
* clk square wave. That is less than the overhead of 'digitalWrite' at this clock rate,
|
||||
* so no additional delays are needed yet. */
|
||||
|
||||
digitalWrite(sm16716_pin_dat, (v != 0) ? HIGH : LOW);
|
||||
//delayMicroseconds(1);
|
||||
digitalWrite(sm16716_pin_clk, HIGH);
|
||||
//delayMicroseconds(1);
|
||||
digitalWrite(sm16716_pin_clk, LOW);
|
||||
}
|
||||
|
||||
void SM16716_SendByte(uint8_t v)
|
||||
{
|
||||
uint8_t mask;
|
||||
|
||||
for (mask = 0x80; mask; mask >>= 1) {
|
||||
SM16716_SendBit(v & mask);
|
||||
}
|
||||
}
|
||||
|
||||
void SM16716_Update(uint8_t duty_r, uint8_t duty_g, uint8_t duty_b)
|
||||
{
|
||||
if (sm16716_pin_sel < 99) {
|
||||
uint8_t sm16716_should_enable = (duty_r | duty_g | duty_b);
|
||||
if (!sm16716_enabled && sm16716_should_enable) {
|
||||
#ifdef D_LOG_SM16716
|
||||
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_SM16716 "turning color on"));
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
#endif // D_LOG_SM16716
|
||||
sm16716_enabled = 1;
|
||||
digitalWrite(sm16716_pin_sel, HIGH);
|
||||
// in testing I found it takes a minimum of ~380us to wake up the chip
|
||||
// tested on a Merkury RGBW with an SM726EB
|
||||
delayMicroseconds(400);
|
||||
SM16716_Init();
|
||||
}
|
||||
else if (sm16716_enabled && !sm16716_should_enable) {
|
||||
#ifdef D_LOG_SM16716
|
||||
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_SM16716 "turning color off"));
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
#endif // D_LOG_SM16716
|
||||
sm16716_enabled = 0;
|
||||
digitalWrite(sm16716_pin_sel, LOW);
|
||||
}
|
||||
}
|
||||
#ifdef D_LOG_SM16716
|
||||
snprintf_P(log_data, sizeof(log_data),
|
||||
PSTR(D_LOG_SM16716 "Update; rgb=%02x%02x%02x"),
|
||||
duty_r, duty_g, duty_b);
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
#endif // D_LOG_SM16716
|
||||
|
||||
// send start bit
|
||||
SM16716_SendBit(1);
|
||||
// send 24-bit rgb data
|
||||
SM16716_SendByte(duty_r);
|
||||
SM16716_SendByte(duty_g);
|
||||
SM16716_SendByte(duty_b);
|
||||
// send a 'do it' pulse
|
||||
// (if multiple chips are chained, each one processes the 1st '1rgb' 25-bit block and
|
||||
// passes on the rest, right until the one starting with 0)
|
||||
//SM16716_Init();
|
||||
SM16716_SendBit(0);
|
||||
SM16716_SendByte(0);
|
||||
SM16716_SendByte(0);
|
||||
SM16716_SendByte(0);
|
||||
}
|
||||
|
||||
bool SM16716_ModuleSelected(void)
|
||||
{
|
||||
sm16716_pin_clk = pin[GPIO_SM16716_CLK];
|
||||
sm16716_pin_dat = pin[GPIO_SM16716_DAT];
|
||||
sm16716_pin_sel = pin[GPIO_SM16716_SEL];
|
||||
#ifdef D_LOG_SM16716
|
||||
snprintf_P(log_data, sizeof(log_data),
|
||||
PSTR(D_LOG_SM16716 "ModuleSelected; clk_pin=%d, dat_pin=%d)"),
|
||||
sm16716_pin_clk, sm16716_pin_dat);
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
#endif // D_LOG_SM16716
|
||||
return (sm16716_pin_clk < 99) && (sm16716_pin_dat < 99);
|
||||
}
|
||||
|
||||
void SM16716_Init(void)
|
||||
{
|
||||
for (uint8_t t_init = 0; t_init < 50; ++t_init) {
|
||||
SM16716_SendBit(0);
|
||||
}
|
||||
}
|
||||
|
||||
#endif // ifdef USE_SM16716
|
||||
|
||||
/********************************************************************************************/
|
||||
|
||||
void LightInit(void)
|
||||
|
|
@ -402,6 +516,32 @@ void LightInit(void)
|
|||
max_scheme = LS_MAX + WS2812_SCHEMES;
|
||||
}
|
||||
#endif // USE_WS2812 ************************************************************************
|
||||
#ifdef USE_SM16716
|
||||
else if (LT_SM16716 == light_type - light_subtype) {
|
||||
// init PWM
|
||||
for (uint8_t i = 0; i < light_subtype; i++) {
|
||||
Settings.pwm_value[i] = 0; // Disable direct PWM control
|
||||
if (pin[GPIO_PWM1 +i] < 99) {
|
||||
pinMode(pin[GPIO_PWM1 +i], OUTPUT);
|
||||
}
|
||||
}
|
||||
// init sm16716
|
||||
pinMode(sm16716_pin_clk, OUTPUT);
|
||||
digitalWrite(sm16716_pin_clk, LOW);
|
||||
|
||||
pinMode(sm16716_pin_dat, OUTPUT);
|
||||
digitalWrite(sm16716_pin_dat, LOW);
|
||||
|
||||
if (sm16716_pin_sel < 99) {
|
||||
pinMode(sm16716_pin_sel, OUTPUT);
|
||||
digitalWrite(sm16716_pin_sel, LOW);
|
||||
// no need to call SM16716_Init here, it will be called after sel goes HIGH
|
||||
} else {
|
||||
// no sel pin means you have an 'always on' chip, so init right away
|
||||
SM16716_Init();
|
||||
}
|
||||
}
|
||||
#endif // ifdef USE_SM16716
|
||||
else {
|
||||
light_pdi_pin = pin[GPIO_DI];
|
||||
light_pdcki_pin = pin[GPIO_DCKI];
|
||||
|
|
@ -844,6 +984,24 @@ void LightAnimate(void)
|
|||
Ws2812SetColor(0, cur_col[0], cur_col[1], cur_col[2], cur_col[3]);
|
||||
}
|
||||
#endif // USE_ES2812 ************************************************************************
|
||||
#ifdef USE_SM16716
|
||||
else if (LT_SM16716 == light_type - light_subtype) {
|
||||
// handle any PWM pins, skipping the first 3 values for sm16716
|
||||
for (uint8_t i = 3; i < light_subtype; i++) {
|
||||
if (pin[GPIO_PWM1 +i-3] < 99) {
|
||||
if (cur_col[i] > 0xFC) {
|
||||
cur_col[i] = 0xFC; // Fix unwanted blinking and PWM watchdog errors for values close to pwm_range (H801, Arilux and BN-SZ01)
|
||||
}
|
||||
uint16_t curcol = cur_col[i] * (Settings.pwm_range / 255);
|
||||
// snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION "Cur_Col%d %d, CurCol %d"), i, cur_col[i], curcol);
|
||||
// AddLog(LOG_LEVEL_DEBUG);
|
||||
analogWrite(pin[GPIO_PWM1 +i-3], bitRead(pwm_inverted, i-3) ? Settings.pwm_range - curcol : curcol);
|
||||
}
|
||||
}
|
||||
// handle sm16716 update
|
||||
SM16716_Update(cur_col[0], cur_col[1], cur_col[2]);
|
||||
}
|
||||
#endif // ifdef USE_SM16716
|
||||
else if (light_type > LT_WS2812) {
|
||||
LightMy92x1Duty(cur_col[0], cur_col[1], cur_col[2], cur_col[3], cur_col[4]);
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue