mirror of https://github.com/arendst/Tasmota.git
Update comments
This commit is contained in:
parent
95362af6e4
commit
7f1f9727ef
|
@ -27,7 +27,7 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
||||||
struct { // SetOption0 .. SetOption31
|
struct { // SetOption0 .. SetOption31
|
||||||
uint32_t save_state : 1; // bit 0 - SetOption0 - (Settings) Save power state (1) and use after restart
|
uint32_t save_state : 1; // bit 0 - SetOption0 - (Settings) Save power state (1) and use after restart
|
||||||
uint32_t button_restrict : 1; // bit 1 - SetOption1 - (Button) Control button single press (1) or multipress (0)
|
uint32_t button_restrict : 1; // bit 1 - SetOption1 - (Button) Control button single press (1) or multipress (0)
|
||||||
uint32_t ex_value_units : 1; // bit 2 - SetOption2 - (Not used) Add units to JSON status messages - removed 6.6.0.21
|
uint32_t ex_value_units : 1; // bit 2 - SetOption2 - (not used) Add units to JSON status messages - removed 6.6.0.21
|
||||||
uint32_t mqtt_enabled : 1; // bit 3 - SetOption3 - (MQTT) Enable (1)
|
uint32_t mqtt_enabled : 1; // bit 3 - SetOption3 - (MQTT) Enable (1)
|
||||||
uint32_t mqtt_response : 1; // bit 4 - SetOption4 - (MQTT) Switch between RESULT (0) or COMMAND (1)
|
uint32_t mqtt_response : 1; // bit 4 - SetOption4 - (MQTT) Switch between RESULT (0) or COMMAND (1)
|
||||||
uint32_t mqtt_power_retain : 1; // bit 5 - CMND_POWERRETAIN
|
uint32_t mqtt_power_retain : 1; // bit 5 - CMND_POWERRETAIN
|
||||||
|
@ -82,7 +82,7 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
||||||
uint32_t tuya_serial_mqtt_publish : 1; // bit 16 (v6.6.0.21) - SetOption66 - (Tuya) Enable (1) TuyaMcuReceived messages over Mqtt
|
uint32_t tuya_serial_mqtt_publish : 1; // bit 16 (v6.6.0.21) - SetOption66 - (Tuya) Enable (1) TuyaMcuReceived messages over Mqtt
|
||||||
uint32_t buzzer_enable : 1; // bit 17 (v6.6.0.1) - SetOption67 - (Buzzer) Enable (1) buzzer when available
|
uint32_t buzzer_enable : 1; // bit 17 (v6.6.0.1) - SetOption67 - (Buzzer) Enable (1) buzzer when available
|
||||||
uint32_t pwm_multi_channels : 1; // bit 18 (v6.6.0.3) - SetOption68 - (Light) Enable multi-channels PWM (1) instead of Color PWM (0)
|
uint32_t pwm_multi_channels : 1; // bit 18 (v6.6.0.3) - SetOption68 - (Light) Enable multi-channels PWM (1) instead of Color PWM (0)
|
||||||
uint32_t ex_tuya_dimmer_min_limit : 1; // bit 19 (v6.6.0.5) - SetOption69 - (Obsolete) Limits Tuya dimmers to minimum of 10% (25) when enabled.
|
uint32_t ex_tuya_dimmer_min_limit : 1; // bit 19 (v6.6.0.5) - SetOption69 - (not used) Limits Tuya dimmers to minimum of 10% (25) when enabled
|
||||||
uint32_t energy_weekend : 1; // bit 20 (v6.6.0.8) - CMND_TARIFF
|
uint32_t energy_weekend : 1; // bit 20 (v6.6.0.8) - CMND_TARIFF
|
||||||
uint32_t dds2382_model : 1; // bit 21 (v6.6.0.14) - SetOption71 - (DDS2382) Select different Modbus registers (1) for Active Energy (#6531)
|
uint32_t dds2382_model : 1; // bit 21 (v6.6.0.14) - SetOption71 - (DDS2382) Select different Modbus registers (1) for Active Energy (#6531)
|
||||||
uint32_t hardware_energy_total : 1; // bit 22 (v6.6.0.15) - SetOption72 - (Energy) Enable (1) hardware energy total counter as reference (#6561)
|
uint32_t hardware_energy_total : 1; // bit 22 (v6.6.0.15) - SetOption72 - (Energy) Enable (1) hardware energy total counter as reference (#6561)
|
||||||
|
@ -91,7 +91,7 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
||||||
uint32_t grouptopic_mode : 1; // bit 25 (v7.0.0.1) - SetOption75 - (MQTT) GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1)
|
uint32_t grouptopic_mode : 1; // bit 25 (v7.0.0.1) - SetOption75 - (MQTT) GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1)
|
||||||
uint32_t bootcount_update : 1; // bit 26 (v7.0.0.4) - SetOption76 - (Deepsleep) Enable incrementing bootcount (1) when deepsleep is enabled
|
uint32_t bootcount_update : 1; // bit 26 (v7.0.0.4) - SetOption76 - (Deepsleep) Enable incrementing bootcount (1) when deepsleep is enabled
|
||||||
uint32_t slider_dimmer_stay_on : 1; // bit 27 (v7.0.0.6) - SetOption77 - (Light) Do not power off (1) if slider moved to far left
|
uint32_t slider_dimmer_stay_on : 1; // bit 27 (v7.0.0.6) - SetOption77 - (Light) Do not power off (1) if slider moved to far left
|
||||||
uint32_t ex_compatibility_check : 1; // bit 28 (v7.1.2.6) - SetOption78 - (Obsolete) Disable OTA compatibility check
|
uint32_t ex_compatibility_check : 1; // bit 28 (v7.1.2.6) - SetOption78 - (not used) Disable OTA compatibility check
|
||||||
uint32_t counter_reset_on_tele : 1; // bit 29 (v8.1.0.1) - SetOption79 - (Counter) Enable resetting of counters (1) after telemetry was sent
|
uint32_t counter_reset_on_tele : 1; // bit 29 (v8.1.0.1) - SetOption79 - (Counter) Enable resetting of counters (1) after telemetry was sent
|
||||||
uint32_t shutter_mode : 1; // bit 30 (v6.6.0.14) - SetOption80 - (Shutter) Enable shutter support (1)
|
uint32_t shutter_mode : 1; // bit 30 (v6.6.0.14) - SetOption80 - (Shutter) Enable shutter support (1)
|
||||||
uint32_t pcf8574_ports_inverted : 1; // bit 31 (v6.6.0.14) - SetOption81 - (PCF8574) Invert all ports on PCF8574 devices (1)
|
uint32_t pcf8574_ports_inverted : 1; // bit 31 (v6.6.0.14) - SetOption81 - (PCF8574) Invert all ports on PCF8574 devices (1)
|
||||||
|
@ -121,7 +121,7 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
|
||||||
uint32_t zerocross_dimmer : 1; // bit 17 (v8.3.1.4) - SetOption99 - (PWM Dimmer) Enable zerocross dimmer (1)
|
uint32_t zerocross_dimmer : 1; // bit 17 (v8.3.1.4) - SetOption99 - (PWM Dimmer) Enable zerocross dimmer (1)
|
||||||
uint32_t remove_zbreceived : 1; // bit 18 (v8.3.1.7) - SetOption100 - (Zigbee) Remove ZbReceived form JSON message (1)
|
uint32_t remove_zbreceived : 1; // bit 18 (v8.3.1.7) - SetOption100 - (Zigbee) Remove ZbReceived form JSON message (1)
|
||||||
uint32_t zb_index_ep : 1; // bit 19 (v8.3.1.7) - SetOption101 - (Zigbee) Add the source endpoint as suffix to attributes, ex `Power3` (1) instead of `Power` (0) if sent from endpoint 3
|
uint32_t zb_index_ep : 1; // bit 19 (v8.3.1.7) - SetOption101 - (Zigbee) Add the source endpoint as suffix to attributes, ex `Power3` (1) instead of `Power` (0) if sent from endpoint 3
|
||||||
uint32_t teleinfo_baudrate : 1; // bit 20 (v8.4.0.1) - SetOption102 - (Teleinfo) Set Baud rate for Teleinfo communication to 1200 (0) or 9600 (1))
|
uint32_t teleinfo_baudrate : 1; // bit 20 (v8.4.0.1) - SetOption102 - (Teleinfo) Set Baud rate for Teleinfo communication to 1200 (0) or 9600 (1)
|
||||||
uint32_t mqtt_tls : 1; // bit 21 (v8.4.0.1) - SetOption103 - (MQTT TLS) Enable TLS mode (1) (requires TLS version)
|
uint32_t mqtt_tls : 1; // bit 21 (v8.4.0.1) - SetOption103 - (MQTT TLS) Enable TLS mode (1) (requires TLS version)
|
||||||
uint32_t mqtt_no_retain : 1; // bit 22 (v8.4.0.1) - SetOption104 - (MQTT) No Retain (1) - disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant
|
uint32_t mqtt_no_retain : 1; // bit 22 (v8.4.0.1) - SetOption104 - (MQTT) No Retain (1) - disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant
|
||||||
uint32_t white_blend_mode : 1; // bit 23 (v8.4.0.1) - SetOption105 - (Light) White Blend Mode (1) - used to be `RGBWWTable` last value `0`, now deprecated in favor of this option
|
uint32_t white_blend_mode : 1; // bit 23 (v8.4.0.1) - SetOption105 - (Light) White Blend Mode (1) - used to be `RGBWWTable` last value `0`, now deprecated in favor of this option
|
||||||
|
|
|
@ -50,50 +50,50 @@ from optparse import OptionParser
|
||||||
a_on_off = ["OFF","ON "]
|
a_on_off = ["OFF","ON "]
|
||||||
|
|
||||||
a_setoption = [[
|
a_setoption = [[
|
||||||
"Save power state and use after restart",
|
"(Settings) Save power state (1) and use after restart",
|
||||||
"Restrict button actions to single, double and hold",
|
"(Button) Control button single press (1) or multipress (0)",
|
||||||
"(not used) Show value units in JSON messages",
|
"(Not used) Add units to JSON status messages",
|
||||||
"MQTT enabled",
|
"(MQTT) Enable (1)",
|
||||||
"Respond as Command topic instead of RESULT",
|
"(MQTT) Switch between RESULT (0) or COMMAND (1)",
|
||||||
"MQTT retain on Power",
|
"(MQTT) Retain on Power",
|
||||||
"MQTT retain on Button",
|
"(MQTT) Retain on Button",
|
||||||
"MQTT retain on Switch",
|
"(MQTT) Retain on Switch",
|
||||||
"Convert temperature to Fahrenheit",
|
"(Temperature) Switch between Celsius (0) or Fahrenheit (1)",
|
||||||
"MQTT retain on Sensor",
|
"(MQTT) Retain on Sensor",
|
||||||
"MQTT retained LWT to OFFLINE when topic changes",
|
"(MQTT) Control LWT message format, Offline (1) or none (0)",
|
||||||
"Swap Single and Double press Button",
|
"(Button) Swap (1) button single and double press functionality",
|
||||||
"Do not use flash page rotate",
|
"(Settings) Switch between dynamic (0) or fixed (1) slot flash save location",
|
||||||
"Button single press only",
|
"(Button) Support only single press (1) to speed up button press recognition",
|
||||||
"Power interlock mode",
|
"(Interlock) Power interlock mode",
|
||||||
"Do not allow PWM control",
|
"(Light) Switch between commands PWM (1) or COLOR/DIMMER/CT/CHANNEL (0)",
|
||||||
"Reverse clock",
|
"(WS2812) Switch between clockwise (0) or counter-clockwise (1)",
|
||||||
"Allow entry of decimal color values",
|
"(Light) Switch between decimal (1) or hexadecimal (0) output",
|
||||||
"CO2 color to light signal",
|
"(Light) Pair light signal (1) with CO2 sensor",
|
||||||
"HASS discovery",
|
"(HAss) Control automatic discovery (1) (See SetOption59)",
|
||||||
"Do not control Power with Dimmer",
|
"(Light) Control power in relation to Dimmer/Color/Ct changes (1)",
|
||||||
"Energy monitoring while powered off",
|
"(Energy) Show voltage even if powered off (1)",
|
||||||
"MQTT serial",
|
"(MQTT) Serial",
|
||||||
"MQTT serial binary",
|
"(MQTT) Serial binary",
|
||||||
"Convert pressure to mmHg",
|
"(Pressure) switch between hPa (0)or mmHg (1) unit",
|
||||||
"KNX enabled",
|
"(KNX) Enabled",
|
||||||
"Use Power device index on single relay devices",
|
"(MQTT, HAss) Switch between POWER (0) or POWER1 (1)",
|
||||||
"KNX enhancement",
|
"(KNX) Enhancement",
|
||||||
"RF receive decimal",
|
"(RF) Receive data format hexadecimal (0) or decimal (1)",
|
||||||
"IR receive decimal",
|
"(IR) Receive data format hexadecimal (0) or decimal (1)",
|
||||||
"Enforce HASS light group",
|
"(HAss) enforce autodiscovery as light (1)",
|
||||||
"Do not show Wifi and Mqtt state using Led"
|
"(Wifi, MQTT) Control link led blinking (1)"
|
||||||
],[
|
],[
|
||||||
"Key hold time (ms)",
|
"(Button) Key hold time (ms)",
|
||||||
"Sonoff POW Max_Power_Retry",
|
"(Pow) Sonoff POW Max_Power_Retry",
|
||||||
"Backlog delay (ms)",
|
"(Backlog) Delay (ms)",
|
||||||
"(not used) mDNS delayed start (Sec)",
|
"(not used) mDNS delayed start (Sec)",
|
||||||
"Boot loop retry offset (0 = disable)",
|
"(Boot loop) Retry offset (0 = disable)",
|
||||||
"RGBWW remap",
|
"(Light) RGBWW remap",
|
||||||
"IR Unknown threshold",
|
"(IR) Unknown threshold",
|
||||||
"CSE7766 invalid power margin",
|
"(CSE7766) invalid power margin",
|
||||||
"Ignore hold time (s)",
|
"(Button) Ignore hold time (s)",
|
||||||
"Gratuitous ARP repeat time",
|
"(Wifi) Gratuitous ARP repeat time",
|
||||||
"Over temperature threshold (celsius)",
|
"(Temperature) Over temperature threshold (celsius)",
|
||||||
"(not used) Tuya MCU max dimmer value",
|
"(not used) Tuya MCU max dimmer value",
|
||||||
"(not used) Tuya MCU voltage Id",
|
"(not used) Tuya MCU voltage Id",
|
||||||
"(not used) Tuya MCU current Id",
|
"(not used) Tuya MCU current Id",
|
||||||
|
@ -102,75 +102,75 @@ a_setoption = [[
|
||||||
"(not used) Energy Tariff2 start hour",
|
"(not used) Energy Tariff2 start hour",
|
||||||
"",
|
"",
|
||||||
],[
|
],[
|
||||||
"Timers enabled",
|
"(Timers) Enabled",
|
||||||
"Generic ESP8285 GPIO enabled",
|
"(GPIO) Enable ESP8285 user GPIO's (1)",
|
||||||
"Add UTC time offset to JSON message",
|
"(Time) Append timezone to JSON time (1)",
|
||||||
"Show hostname and IP address in GUI",
|
"(GUI) Show hostname and IP address in GUI main menu (1)",
|
||||||
"Apply SetOption20 to Tuya",
|
"(Tuya) Apply SetOption20 settings to Tuya device (1)",
|
||||||
"mDNS enabled",
|
"(mDNS) Service on (1) or off (0)",
|
||||||
"Use wifi network scan at restart",
|
"(Wifi) Scan network at restart for configured AP's (1) or used stored AP (0)",
|
||||||
"Use wifi network rescan regularly",
|
"(Wifi) Scan network every 44 minutes for configured AP's (1)",
|
||||||
"Add IR raw data to JSON message",
|
"(IR) Add IR Raw data to JSON message (1)",
|
||||||
"Change state topic from tele/STATE to stat/RESULT",
|
"(MQTT) Send tele/%topic%/STATE in addition to stat/%topic%/RESULT (1)",
|
||||||
"Enable normal sleep instead of dynamic sleep",
|
"(Sleep) Enable normal sleep (1) instead of dynamic sleep (0)",
|
||||||
"Force local operation when button/switch topic is set",
|
"(Button, Switch) Force local operation (1) when button/switch topic is set",
|
||||||
"Do not use retain flag on HOLD messages",
|
"(MQTT) Don't use retain flag on HOLD messages (1)",
|
||||||
"Do not scan relay power state at restart",
|
"(Power) Don't scan relay power state at restart (1)",
|
||||||
"Use _ instead of - as sensor index separator",
|
"(JSON) Enable '_' (1) instead of '-' (0) as sensor index separator",
|
||||||
"Disable fast power cycle detection for device reset",
|
"(QPC) Disable (1) fast power cycle detection for device reset",
|
||||||
"Enable TuyaMcuReceived messages over Mqtt",
|
"(Tuya) Enable (1) TuyaMcuReceived messages over Mqtt",
|
||||||
"Enable buzzer when available",
|
"(Buzzer) Enable (1) buzzer when available",
|
||||||
"Enable multi-channels PWM instead of Color PWM",
|
"(Light) Enable multi-channels PWM (1) instead of Color PWM (0)",
|
||||||
"(not used) Limits Tuya MCU dimmers to minimum of 10% (25) when enabled",
|
"(not used) Limits Tuya dimmers to minimum of 10% (25) when enabled",
|
||||||
"Enable Weekend Energy Tariff",
|
"(Energy) Enable Weekend Energy Tariff",
|
||||||
"Select different Modbus registers for Active Energy",
|
"(DDS2382) Select different Modbus registers (1) for Active Energy (#6531)",
|
||||||
"Enable hardware energy total counter as reference",
|
"(Energy) Enable (1) hardware energy total counter as reference (#6561)",
|
||||||
"Detach buttons from relays and enable MQTT action state for multipress",
|
"(Button) Detach buttons from relays (1) and enable MQTT action state for multipress",
|
||||||
"Enable internal pullup for single DS18x20 sensor",
|
"(DS18x20) Enable internal pullup (1) for single DS18x20 sensor",
|
||||||
"GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1)",
|
"(MQTT) GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1)",
|
||||||
"Enable incrementing bootcount when deepsleep is enabled",
|
"(Deepsleep) Enable incrementing bootcount (1) when deepsleep is enabled",
|
||||||
"Do not power off if slider moved to far left",
|
"(Light) Do not power off (1) if slider moved to far left",
|
||||||
"Bypass Compatibility check",
|
"(not used) Disable OTA compatibility check",
|
||||||
"Enable resetting of counters after telemetry was sent",
|
"(Counter) Enable resetting of counters (1) after telemetry was sent",
|
||||||
"Enable shutter support",
|
"(Shutter) Enable shutter support (1)",
|
||||||
"Invert PCF8574 ports"
|
"(PCF8574) Invert all ports on PCF8574 devices (1)"
|
||||||
],[
|
],[
|
||||||
"Reduced CT range for Alexa",
|
"(Alexa) Reduced CT range for Alexa (1)",
|
||||||
"Use FriendlyNames instead of ShortAddresses when possible",
|
"(Zigbee) Use FriendlyNames (1) instead of ShortAddresses (0) when possible",
|
||||||
"(AWS IoT) publish MQTT state to a device shadow",
|
"(AWS IoT) publish MQTT state to a device shadow (1)",
|
||||||
"Enable Device Groups",
|
"(DevGroups) Enable Device Groups (1)",
|
||||||
"PWM Dimmer Turn brightness LED's off 5 seconds after last change",
|
"(PWM Dimmer) Turn brightness LED's off (1) 5 seconds after last change",
|
||||||
"PWM Dimmer Turn red LED on when powered off",
|
"(PWM Dimmer) Turn red LED on (1) when powered off",
|
||||||
"PWM Dimmer Buttons control remote devices",
|
"(DevGroups) Enable relays in separate device groups/PWM Dimmer Buttons control remote devices (1)",
|
||||||
"Distinct MQTT topics per device for Zigbee",
|
"(MQTT, Zigbee) Distinct MQTT topics per device for Zigbee (1) (#7835)",
|
||||||
"Disable non-json MQTT response",
|
"(MQTT) Disable non-json MQTT response (1)",
|
||||||
"Enable light fading at start/power on",
|
"(Light) Enable light fading at start/power on (1)",
|
||||||
"Set PWM Mode from regular PWM to ColorTemp control",
|
"(Light) Set PWM Mode from regular PWM (0) to ColorTemp (1) control (Xiaomi Philips ...)",
|
||||||
"Keep uncompressed rules in memory to avoid CPU load of uncompressing at each tick",
|
"(Compress) Keep uncompressed rules in memory to avoid CPU load of uncompressing at each tick (1)",
|
||||||
"Implement simpler MAX6675 protocol instead of MAX31855",
|
"(MAXxxx) Implement simpler MAX6675 protocol (1) instead of MAX31855 (0)",
|
||||||
"Enable Wifi",
|
"(Wifi) Enable Wifi",
|
||||||
"Enable Ethernet (ESP32)",
|
"(Eth) Enable Ethernet (ESP32)",
|
||||||
"Set Baud rate for TuyaMCU serial communication (0 = 9600 or 1 = 115200)",
|
"(Tuya) Set Baud rate for TuyaMCU serial communication to 9600 (0) or 115200 (1)",
|
||||||
"Rotary encoder uses rules instead of light control",
|
"(Rotary) Use rules (1) instead of light control (0)",
|
||||||
"Enable zerocross dimmer on PWM DIMMER",
|
"(PWM Dimmer) Enable zerocross dimmer (1)",
|
||||||
"Remove ZbReceived form JSON message",
|
"(Zigbee) Remove ZbReceived form JSON message (1)",
|
||||||
"Add the source endpoint as suffix to attributes",
|
"(Zigbee) Add the source endpoint as suffix to attributes, ex `Power3` (1) instead of `Power` (0) if sent from endpoint 3",
|
||||||
"Baud rate for Teleinfo communication (0 = 1200 or 1 = 9600)",
|
"(Teleinfo) Set Baud rate for Teleinfo communication to 1200 (0) or 9600 (1)",
|
||||||
"TLS mode",
|
"(MQTT TLS) Enable TLS mode (1) (requires TLS version)",
|
||||||
"Disable all MQTT retained messages",
|
"(MQTT) No Retain (1) - disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant",
|
||||||
"Enable White blend mode",
|
"(Light) White Blend Mode (1) - used to be `RGBWWTable` last value `0`, now deprecated in favor of this option",
|
||||||
"Create a virtual White ColorTemp for RGBW lights",
|
"(Light) Virtual CT (1) - Creates a virtual White ColorTemp for RGBW lights",
|
||||||
"Select virtual White as (0) Warm or (1) Cold",
|
"(Light) Virtual CT Channel (1) - signals whether the hardware white is cold CW (true) or warm WW (false)",
|
||||||
"Enable Teleinfo telemetry into Tasmota Energy MQTT (0) or Teleinfo only (1)",
|
"(Teleinfo) Enable Teleinfo + Tasmota Energy device (0) or Teleinfo raw data only (1)",
|
||||||
"Force gen1 Alexa mode",
|
"(Alexa) Gen1 mode (1) - if you only have Echo Dot 2nd gen devices",
|
||||||
"Disable Zigbee auto-config when pairing new devices",
|
"(Zigbee) Disable auto-config (1) when pairing new devices",
|
||||||
"Use frequency output for buzzer pin instead of on/off signal",
|
"(Buzzer) Use frequency output (1) for buzzer pin instead of on/off signal (0)",
|
||||||
"Use friendly name in zigbee topic (use with SetOption89)",
|
"(Zigbee) Use friendly name in zigbee topic (1) (use with SetOption89)",
|
||||||
"Set dimmer low on rotary dial after power off"
|
"(Rotary) Set dimmer low on rotary dial after power off (1)"
|
||||||
],[
|
],[
|
||||||
"Detach Switches from Relays and enable MQTT action state for all the SwitchModes",
|
"(Switch) Detach Switches from relays and enable MQTT action state for all the SwitchModes (1)",
|
||||||
"Enable ESP32 MI32 BLE",
|
"(ESP32 BLE) Enable ESP32 MI32 BLE (1)",
|
||||||
"Disable auto-query of zigbee lights and devices",
|
"(Zigbee) Disable auto-query of zigbee lights and devices (1)",
|
||||||
"",
|
"",
|
||||||
"","","","",
|
"","","","",
|
||||||
"","","","",
|
"","","","",
|
||||||
|
@ -271,7 +271,7 @@ else:
|
||||||
obj = json.load(fp)
|
obj = json.load(fp)
|
||||||
|
|
||||||
def StartDecode():
|
def StartDecode():
|
||||||
print ("\n*** decode-status.py v20201114 by Theo Arends and Jacek Ziolkowski ***")
|
print ("\n*** decode-status.py v20201129 by Theo Arends and Jacek Ziolkowski ***")
|
||||||
|
|
||||||
# print("Decoding\n{}".format(obj))
|
# print("Decoding\n{}".format(obj))
|
||||||
|
|
||||||
|
@ -304,14 +304,14 @@ def StartDecode():
|
||||||
split_register = [int(register[opt*2:opt*2+2],16) for opt in range(18)] # split register into 18 values
|
split_register = [int(register[opt*2:opt*2+2],16) for opt in range(18)] # split register into 18 values
|
||||||
|
|
||||||
for opt_idx, option in enumerate(opt_group):
|
for opt_idx, option in enumerate(opt_group):
|
||||||
options.append(str("{0:2d} ({1:3d}) {2}".format(i, split_register[opt_idx], option)))
|
options.append(str("{0:3d} ({1:3d}) {2}".format(i, split_register[opt_idx], option)))
|
||||||
i += 1
|
i += 1
|
||||||
|
|
||||||
if r in (0, 2, 3, 4): #registers 1 and 4 hold binary values
|
if r in (0, 2, 3, 4): #registers 1 and 4 hold binary values
|
||||||
for opt_idx, option in enumerate(opt_group):
|
for opt_idx, option in enumerate(opt_group):
|
||||||
i_register = int(register,16)
|
i_register = int(register,16)
|
||||||
state = (i_register >> opt_idx) & 1
|
state = (i_register >> opt_idx) & 1
|
||||||
options.append(str("{0:2d} ({1}) {2}".format(i, a_on_off[state], option)))
|
options.append(str("{0:3d} ({1}) {2}".format(i, a_on_off[state], option)))
|
||||||
i += 1
|
i += 1
|
||||||
|
|
||||||
print("\nOptions")
|
print("\nOptions")
|
||||||
|
|
Loading…
Reference in New Issue