Version v14.2.0.3

- Add command ``SetOption69 1`` to enable Serial Bridge inverted Receive (#22000)

CHANGELOG.md

@@ -3,19 +3,23 @@ All notable changes to this project will be documented in this file.
 
 ## [Unreleased] - Development
 
-## [14.2.0.2]
+## [14.2.0.3]
 ### Added
+- Command ``SetOption69 1`` to enable Serial Bridge inverted Receive (#22000)
 
 ### Breaking Changed
 
 ### Changed
-- Energy BL09xx command ``CurrentSet`` input changed from Ampere to milliAmpere
-- GPIOViewer from v1.5.5 to v1.5.6
 
 ### Fixed
 
 ### Removed
 
+## [14.2.0.2] 20240823
+### Changed
+- Energy BL09xx command ``CurrentSet`` input changed from Ampere to milliAmpere
+- GPIOViewer from v1.5.5 to v1.5.6
+
 ## [14.2.0.1] 20240821
 ### Added
 - Energy Log level 4 message when (Calculated) Apparent Power is less than Active Power indicating wrong calibration (#20653)

RELEASENOTES.md

@@ -119,8 +119,9 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 
 [Complete list](BUILDS.md) of available feature and sensors.
 
-## Changelog v14.2.0.2
+## Changelog v14.2.0.3
 ### Added
+- Command ``SetOption69 1`` to enable Serial Bridge inverted Receive [#22000](https://github.com/arendst/Tasmota/issues/22000)
 - Energy command ``PowerSet 60,230`` to calibrate both Current and Power with known resistive load of 60W at 230V using calibrated Voltage
 - Energy command ``CurrentSet 60,230`` to calibrate both Power and Current with known resistive load of 60W at 230V using calibrated Voltage
 - Energy Log level 4 message when (Calculated) Apparent Power is less than Active Power indicating wrong calibration [#20653](https://github.com/arendst/Tasmota/issues/20653)

tasmota/include/tasmota_types.h

@@ -82,7 +82,8 @@ typedef union {                            // Restricted by MISRA-C Rule 18.4 bu
     uint32_t tuya_serial_mqtt_publish : 1; // bit 16 (v6.6.0.21) - SetOption66  - (Tuya) Enable (1) TuyaMcuReceived messages over Mqtt
     uint32_t buzzer_enable : 1;            // bit 17 (v6.6.0.1)  - SetOption67  - (Buzzer) Enable (1) buzzer when available
     uint32_t pwm_multi_channels : 1;       // bit 18 (v6.6.0.3)  - SetOption68  - (Light) Enable multi-channels PWM (1) instead of Color PWM (0)
-    uint32_t ex_tuya_dimmer_min_limit : 1; // bit 19 (v6.6.0.5)  - SetOption69  - (not used) Limits Tuya dimmers to minimum of 10% (25) when enabled
+//    uint32_t ex_tuya_dimmer_min_limit : 1; // bit 19 (v6.6.0.5)  - SetOption69  - (not used) Limits Tuya dimmers to minimum of 10% (25) when enabled
+    uint32_t sb_receive_invert : 1;        // bit 19 (v14.2.0.3) - SetOption69  - (Serial) Invert Serial receive on SerialBridge (1)
     uint32_t energy_weekend : 1;           // bit 20 (v6.6.0.8)  - CMND_TARIFF
     uint32_t dds2382_model : 1;            // bit 21 (v6.6.0.14) - SetOption71  - (DDS2382) Select different Modbus registers (1) for Active Energy (#6531)
     uint32_t hardware_energy_total : 1;    // bit 22 (v6.6.0.15) - SetOption72  - (Energy) Enable (1) hardware energy total counter as reference (#6561)

tasmota/include/tasmota_version.h

@@ -22,6 +22,6 @@
 
 #define TASMOTA_SHA_SHORT                      // Filled by Github sed
 
-const uint32_t TASMOTA_VERSION = 0x0E020002;   // 14.2.0.2
+const uint32_t TASMOTA_VERSION = 0x0E020003;   // 14.2.0.3
 
 #endif  // _TASMOTA_VERSION_H_

tasmota/tasmota_support/settings.ino

@@ -1829,6 +1829,9 @@ void SettingsDelta(void) {
     if (Settings->version < 0x0E010002) {  // 14.1.0.2
       Settings->sserial_mode = Settings->sbflag1.ex_serbridge_console;
     }
+    if (Settings->version < 0x0E020003) {  // 14.2.0.3
+      Settings->flag3.sb_receive_invert = 0;  // SetOption69  - (Serial) Invert Serial receive on SerialBridge
+    }
 
     Settings->version = TASMOTA_VERSION;
     SettingsSave(1);

tasmota/tasmota_support/support_command.ino

@@ -1565,6 +1565,9 @@ void CmndSetoptionBase(bool indexed) {
                 WiFiSetSleepMode();        // Update WiFi sleep mode accordingly
                 break;
               case 18:                     // SetOption68 for multi-channel PWM, requires a reboot
+#ifdef USE_SERIAL_BRIDGE
+              case 19:                     // SetOption69  - (Serial) Invert Serial receive on SerialBridge
+#endif  // USE_SERIAL_BRIDGE
               case 25:                     // SetOption75 grouptopic change
                 TasmotaGlobal.restart_flag = 2;
                 break;

tasmota/tasmota_xdrv_driver/xdrv_08_serial_bridge.ino

@@ -179,7 +179,7 @@ void SerialBridgeInput(void) {
   }
 
 #ifdef USE_SERIAL_BRIDGE_TEE
-  if (SB_TEE == Settings->sserial_mode) {                                     // CMND_SSERIALSEND9 - Enable logging tee to serialbridge
+  if (SB_TEE == Settings->sserial_mode) {                                        // CMND_SSERIALSEND9 - Enable logging tee to serialbridge
     return;
   }
 #endif  // USE_SERIAL_BRIDGE_TEE
@@ -240,8 +240,12 @@ void SerialBridgeInput(void) {
 
 void SerialBridgeInit(void) {
   if (PinUsed(GPIO_SBR_RX) || PinUsed(GPIO_SBR_TX)) {
-//    SerialBridgeSerial = new TasmotaSerial(Pin(GPIO_SBR_RX), Pin(GPIO_SBR_TX), HARDWARE_FALLBACK);  // Default TM_SERIAL_BUFFER_SIZE (=64) size
+    SerialBridgeSerial = new TasmotaSerial(Pin(GPIO_SBR_RX),
-    SerialBridgeSerial = new TasmotaSerial(Pin(GPIO_SBR_RX), Pin(GPIO_SBR_TX), HARDWARE_FALLBACK, 0, MIN_INPUT_BUFFER_SIZE);  // 256
+                                           Pin(GPIO_SBR_TX),
+                                           HARDWARE_FALLBACK,
+                                           0,                                   // Software receive mode (FALLING edge)
+                                           MIN_INPUT_BUFFER_SIZE,               // 256
+                                           Settings->flag3.sb_receive_invert);  // SetOption69  - (Serial) Invert Serial receive on SerialBridge
     if (SetSSerialBegin()) {
       if (SerialBridgeSerial->hardwareSerial()) {
         ClaimSerial();
@@ -384,6 +388,7 @@ void CmndSSerialMode(void) {
 #ifdef USE_SERIAL_BRIDGE_WTS01
       case SB_WTS01:
         Settings->sserial_mode = XdrvMailbox.payload;
+        Settings->flag3.sb_receive_invert = 0;     // SetOption69  - (Serial) Invert Serial receive on SerialBridge
         Settings->sbaudrate = 9600 / 300;          // 9600bps
         SetSSerialConfig(3);                       // 8N1
         break;

tools/decode-status.py

@@ -121,7 +121,7 @@ a_setoption = [[
     "(Tuya) Enable (1) TuyaMcuReceived messages over Mqtt",
     "(Buzzer) Enable (1) buzzer when available",
     "(Light) Enable multi-channels PWM (1) instead of Color PWM (0)",
-    "(not used) Limits Tuya dimmers to minimum of 10% (25) when enabled",
+    "(Serial) Invert Serial receive on SerialBridge (1)",
     "(Energy) Enable Weekend Energy Tariff",
     "(DDS2382) Select different Modbus registers (1) for Active Energy (#6531)",
     "(Energy) Enable (1) hardware energy total counter as reference (#6561)",
@@ -339,7 +339,7 @@ else:
         obj = json.load(fp)
 
 def StartDecode():
-    print ("\n*** decode-status.py v14.1.0.1 by Theo Arends and Jacek Ziolkowski ***")
+    print ("\n*** decode-status.py v14.2.0.3 by Theo Arends and Jacek Ziolkowski ***")
 
 #    print("Decoding\n{}".format(obj))