Add command ``Module2``

Add command ``Module2`` to configure fallback module on fast reboot (#8464)

RELEASENOTES.md

@@ -52,7 +52,7 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 
 ## Changelog
 
-### Version 8.3.1.5
+### Version 8.3.1.6
 
 - Change IRremoteESP8266 library updated to v2.7.7
 - Change Adafruit_SGP30 library from v1.0.3 to v1.2.0 (#8519)
@@ -62,6 +62,7 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add command ``Rule0`` to change global rule parameters
 - Add command ``Time 4`` to display timestamp using milliseconds (#8537)
 - Add command ``SetOption94 0/1`` to select MAX31855 or MAX6675 thermocouple support (#8616)
+- Add command ``Module2`` to configure fallback module on fast reboot (#8464)
 - Add commands ``LedPwmOn 0..255``, ``LedPwmOff 0..255`` and ``LedPwmMode1 0/1`` to control led brightness by George (#8491)
 - Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3``
 - Add support for unique MQTTClient (and inherited fallback topic) by full Mac address using ``mqttclient DVES_%12X`` (#8300)

tasmota/CHANGELOG.md

@@ -1,5 +1,9 @@
 ## Unreleased (development)
 
+### 8.3.1.6 20200617
+
+- Add command ``Module2`` to configure fallback module on fast reboot (#8464)
+
 ### 8.3.1.5 20200616
 
 - Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3``

tasmota/settings.h

@@ -567,11 +567,12 @@ struct {
   uint16_t      windmeter_pulse_debounce;  // F3A
   int16_t       windmeter_speed_factor;    // F3C
   uint8_t       windmeter_tele_pchange;    // F3E
-  uint8_t	      ledpwm_on;                 // F3F
-  uint8_t	      ledpwm_off;                // F40
+  uint8_t       ledpwm_on;                 // F3F
+  uint8_t       ledpwm_off;                // F40
   uint8_t       tcp_baudrate;              // F41
+  uint8_t       fallback_module;           // F42
 
-  uint8_t       free_f42[118];             // F42 - Decrement if adding new Setting variables just above and below
+  uint8_t       free_f43[117];             // F43 - Decrement if adding new Setting variables just above and below
 
   // Only 32 bit boundary variables below
   uint16_t      pulse_counter_debounce_low;  // FB8

tasmota/settings.ino

@@ -768,6 +768,12 @@ void SettingsDefaultSet2(void)
 //  flag.interlock |= 0;
   Settings.interlock[0] = 0xFF;         // Legacy support using all relays in one interlock group
   Settings.module = MODULE;
+#ifdef ESP8266
+  Settings.fallback_module = SONOFF_BASIC;
+#else  // ESP32
+  Settings.fallback_module = WEMOS;
+#endif  // ESP8266 - ESP32
+  Settings.fallback_module = MODULE;
   ModuleDefault(WEMOS);
 //  for (uint32_t i = 0; i < ARRAY_SIZE(Settings.my_gp.io); i++) { Settings.my_gp.io[i] = GPIO_NONE; }
   SettingsUpdateText(SET_FRIENDLYNAME1, PSTR(FRIENDLY_NAME));
@@ -1452,12 +1458,19 @@ void SettingsDelta(void)
       Settings.flag4.network_wifi = 1;
       Settings.flag4.network_ethernet = 1;
     }
-    if (Settings.version < 0x08030105) {
 #ifdef ESP32
+    if (Settings.version < 0x08030105) {
       Settings.eth_type = ETH_TYPE;
       Settings.eth_clk_mode = ETH_CLKMODE;
       Settings.eth_address = ETH_ADDR;
+    }
 #endif
+    if (Settings.version < 0x08030106) {
+#ifdef ESP8266
+      Settings.fallback_module = SONOFF_BASIC;
+#else  // ESP32
+      Settings.fallback_module = WEMOS;
+#endif  // ESP8266 - ESP32
     }
 
     Settings.version = VERSION;

tasmota/support_command.ino

@@ -1018,18 +1018,29 @@ void CmndModule(void)
       present = ValidTemplateModule(XdrvMailbox.payload);
     }
     if (present) {
-      Settings.last_module = Settings.module;
-      Settings.module = XdrvMailbox.payload;
-      SetModuleType();
-      if (Settings.last_module != XdrvMailbox.payload) {
-        for (uint32_t i = 0; i < ARRAY_SIZE(Settings.my_gp.io); i++) {
-          Settings.my_gp.io[i] = GPIO_NONE;
+      if (XdrvMailbox.index == 2) {
+        Settings.fallback_module = XdrvMailbox.payload;
+      } else {
+        Settings.last_module = Settings.module;
+        Settings.module = XdrvMailbox.payload;
+        SetModuleType();
+        if (Settings.last_module != XdrvMailbox.payload) {
+          for (uint32_t i = 0; i < ARRAY_SIZE(Settings.my_gp.io); i++) {
+            Settings.my_gp.io[i] = GPIO_NONE;
+          }
         }
+        restart_flag = 2;
       }
-      restart_flag = 2;
     }
   }
-  Response_P(S_JSON_COMMAND_NVALUE_SVALUE, XdrvMailbox.command, ModuleNr(), ModuleName().c_str());
+  uint8_t module_real = Settings.module;
+  uint8_t module_number = ModuleNr();
+  if (XdrvMailbox.index == 2) {
+    module_real = Settings.fallback_module;
+    module_number = (USER_MODULE == Settings.fallback_module) ? 0 : Settings.fallback_module +1;
+    strcat(XdrvMailbox.command, "2");
+  }
+  Response_P(S_JSON_COMMAND_NVALUE_SVALUE, XdrvMailbox.command, module_number, AnyModuleName(module_real).c_str());
 }
 
 void CmndModules(void)

tasmota/tasmota.ino

@@ -278,12 +278,8 @@ void setup(void) {
 #endif
       }
       if (RtcReboot.fast_reboot_count > Settings.param[P_BOOT_LOOP_OFFSET] +4) {  // Restarted 6 times
-#ifdef ESP8266
-        Settings.module = SONOFF_BASIC;             // Reset module to Sonoff Basic
-  //      Settings.last_module = SONOFF_BASIC;
-#else  // ESP32
-        Settings.module = WEMOS;                    // Reset module to Wemos
-#endif  // ESP8266 - ESP32
+        Settings.module = Settings.fallback_module;  // Reset module to fallback module
+//        Settings.last_module = Settings.fallback_module;
       }
       AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_APPLICATION D_LOG_SOME_SETTINGS_RESET " (%d)"), RtcReboot.fast_reboot_count);
     }

tasmota/tasmota_version.h

@@ -20,7 +20,7 @@
 #ifndef _TASMOTA_VERSION_H_
 #define _TASMOTA_VERSION_H_
 
-const uint32_t VERSION = 0x08030105;
+const uint32_t VERSION = 0x08030106;
 
 // Lowest compatible version
 const uint32_t VERSION_COMPATIBLE = 0x07010006;