v5.2.1

5.2.1 20170622
* Fix Restore Configuration in case of lower version
* Revert auto configuration upgrade allowing easy upgrade which was
removed in version 5.2.0
* Fix config auto upgrade from versions below version 4.1.1 (#530)

README.md

@@ -1,7 +1,7 @@
 ## Sonoff-Tasmota
 Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
 
-Current version is **5.2.0** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
+Current version is **5.2.1** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
 
 ### **** ATTENTION Version 5.x.x specific information ****
 

sonoff/_releasenotes.ino

@@ -1,4 +1,9 @@
-/* 5.2.0 20170619
+/* 5.2.1 20170622
+ * Fix Restore Configuration in case of lower version
+ * Revert auto configuration upgrade allowing easy upgrade which was removed in version 5.2.0 
+ * Fix config auto upgrade from versions below version 4.1.1 (#530)
+ *
+ * 5.2.0 20170619
  * Add command SetOption12 1 to disable newly released configuration flash rotate to reduce flash wear
  * Fix command CounterDebounce by removing test for active GPIO (#524)
  * Add command SetOption33 1..250 to allow user configure POW Max_Power_Retry count (#525)

sonoff/settings.ino

@@ -124,6 +124,9 @@ extern "C" uint32_t _SPIFFS_end;
 
 #define SPIFFS_END          ((uint32_t)&_SPIFFS_end - 0x40200000) / SPI_FLASH_SEC_SIZE
 
+// Version 3.x config
+#define CFG_LOCATION_3      SPIFFS_END - 4
+
 // Version 4.2 config = eeprom area
 #define CFG_LOCATION        SPIFFS_END  // No need for SPIFFS as it uses EEPROM area
 // Version 5.2 allow for more flash space
@@ -258,9 +261,30 @@ void CFG_Load()
   }
   snprintf_P(log, sizeof(log), PSTR("Cnfg: Load from flash at %X and count %d"), _cfgLocation, sysCfg.saveFlag);
   addLog(LOG_LEVEL_DEBUG, log);
+/*  
   if (sysCfg.cfg_holder != CFG_HOLDER) {
     CFG_Default();
   }
+*/
+  if (sysCfg.cfg_holder != CFG_HOLDER) {
+    // Auto upgrade
+    if ((sysCfg.version < 0x04020000) || (sysCfg.version > 0x06000000)) {
+      noInterrupts();
+      spi_flash_read((CFG_LOCATION_3) * SPI_FLASH_SEC_SIZE, (uint32*)&sysCfg, sizeof(SYSCFG));
+      spi_flash_read((CFG_LOCATION_3 + 1) * SPI_FLASH_SEC_SIZE, (uint32*)&_sysCfgH, sizeof(SYSCFGH));
+      if (sysCfg.saveFlag < _sysCfgH.saveFlag)
+        spi_flash_read((CFG_LOCATION_3 + 1) * SPI_FLASH_SEC_SIZE, (uint32*)&sysCfg, sizeof(SYSCFG));
+      interrupts();
+      if (sysCfg.cfg_holder != CFG_HOLDER) {
+        CFG_Default();
+      } else {
+        sysCfg.saveFlag = 0;
+      }
+    } else {
+      CFG_Default();
+    }
+  }
+  
   _cfgHash = getHash();
 
   RTC_Load();
@@ -672,7 +696,9 @@ void CFG_Delta()
       }
     }
     if (sysCfg.version < 0x05010600) {
-      memcpy(sysCfg.state_text, sysCfg.ex_state_text, 33);
+      if (sysCfg.version > 0x04010100) {
+        memcpy(sysCfg.state_text, sysCfg.ex_state_text, 33);
+      }
       strlcpy(sysCfg.state_text[3], MQTT_CMND_HOLD, sizeof(sysCfg.state_text[3]));
     }
     if (sysCfg.version < 0x05010700) {
@@ -683,6 +709,7 @@ void CFG_Delta()
     }
     
     sysCfg.version = VERSION;
+    CFG_Save(1);
   }
 }
 

sonoff/sonoff.ino

@@ -24,7 +24,7 @@
     - Select IDE Tools - Flash size: "1M (no SPIFFS)"
   ====================================================*/
 
-#define VERSION                0x05020000  // 5.2.0
+#define VERSION                0x05020100  // 5.2.1
 
 enum log_t   {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL};
 enum week_t  {Last, First, Second, Third, Fourth};

sonoff/webserver.ino

@@ -1232,6 +1232,10 @@ void handleUploadLoop()
         }
         CFG_DefaultSet2();
         memcpy((char*)&sysCfg +16, upload.buf +16, upload.currentSize -16);
+        
+        memcpy((char*)&sysCfg +8, upload.buf +8, 4);  // Restore version and auto upgrade
+//        CFG_Delta();
+        
       }
     } else {  // firmware
       if (!_uploaderror && (Update.write(upload.buf, upload.currentSize) != upload.currentSize)) {