mirror of https://github.com/arendst/Tasmota.git
output working
This commit is contained in:
Staars
parent
b9e3815358
commit
a1d7d2baf8
|
|
@ -37,24 +37,32 @@
|
|||
|
||||
TasmotaSerial *HM10Serial;
|
||||
|
||||
#define HM10_MAX_TASK_NUMBER 8
|
||||
#define HM10_MAX_TASK_NUMBER 12
|
||||
uint8_t HM10_TASK_LIST[HM10_MAX_TASK_NUMBER+1][2]; // first value: kind of task - second value: delay in x * 100ms
|
||||
uint8_t HM10_CURRENT_TASK_DELAY = 0; // number of 100ms-cycles
|
||||
uint8_t HM10_LAST_COMMAND; // task command code
|
||||
// uint8_t HM10.current_task_delay = 0; // number of 100ms-cycles
|
||||
// uint8_t HM10.last_command;
|
||||
|
||||
uint16_t HM10_CURRENT_PAYLOAD = 0; // payload of a supported command
|
||||
|
||||
#define HM10_MAX_RX_BUF 512
|
||||
char HM10_RX_STRING[HM10_MAX_RX_BUF] = {0}; // make a buffer bigger than the usual 10-byte-message
|
||||
|
||||
struct {
|
||||
uint8_t current_task_delay;
|
||||
uint8_t last_command;
|
||||
uint16_t firmware;
|
||||
struct {
|
||||
uint32_t init:1;
|
||||
uint32_t subscribed:1;
|
||||
// TODO: more to come
|
||||
} mode;
|
||||
} HM10;
|
||||
|
||||
#pragma pack(1)
|
||||
struct {
|
||||
uint16_t temp;
|
||||
uint8_t hum;
|
||||
} LYWSD03;
|
||||
#pragma pack(0)
|
||||
|
||||
/*********************************************************************************************\
|
||||
* constants
|
||||
|
|
@ -95,7 +103,10 @@ enum HM10_Commands {
|
|||
#define TASK_HM10_VERSION 7 // query FW version
|
||||
#define TASK_HM10_NAME 8 // query device name
|
||||
#define TASK_HM10_FEEDBACK 9 // get device response
|
||||
|
||||
#define TASK_HM10_DISCONN 10 // disconnect
|
||||
#define TASK_HM10_SUBSCR 11 // subscribe to service handle
|
||||
#define TASK_HM10_READ 12 // read from handle
|
||||
#define TASK_HM10_FINDALLCHARS 13 // read all available characteristics
|
||||
|
||||
#define TASK_HM10_DONE 99 // used, if there was a task in the slot or just to wait
|
||||
|
||||
|
|
@ -107,19 +118,26 @@ void HM10_Launchtask(uint8_t task, uint8_t slot, uint8_t delay){
|
|||
HM10_TASK_LIST[slot][0] = task;
|
||||
HM10_TASK_LIST[slot][1] = delay;
|
||||
HM10_TASK_LIST[slot+1][0] = TASK_HM10_NOTASK; // the tasks must always be launched in ascending order!!
|
||||
HM10_CURRENT_TASK_DELAY = HM10_TASK_LIST[0][1];
|
||||
HM10.current_task_delay = HM10_TASK_LIST[0][1];
|
||||
}
|
||||
|
||||
void HM10_TaskReplaceInSlot(uint8_t task, uint8_t slot){
|
||||
HM10_LAST_COMMAND = HM10_TASK_LIST[slot][0]; // save command
|
||||
HM10.last_command = HM10_TASK_LIST[slot][0]; // save command
|
||||
HM10_TASK_LIST[slot][0] = task;
|
||||
}
|
||||
|
||||
void HM10_Reset(void) { HM10_Launchtask(TASK_HM10_ROLE1,0,10); // set role to 1
|
||||
HM10_Launchtask(TASK_HM10_IMME1,1,10); // set imme to 1
|
||||
HM10_Launchtask(TASK_HM10_RESET,2,10); // reset Device
|
||||
void HM10_Reset(void) { HM10_Launchtask(TASK_HM10_ROLE1,0,1); // set role to 1
|
||||
HM10_Launchtask(TASK_HM10_IMME1,1,1); // set imme to 1
|
||||
HM10_Launchtask(TASK_HM10_RESET,2,1); // reset Device
|
||||
HM10_Launchtask(TASK_HM10_VERSION,3,10); // read SW Version
|
||||
HM10_Launchtask(TASK_HM10_NAME,4,10); // read name
|
||||
HM10_Launchtask(TASK_HM10_DISC,4,1); // disscovery
|
||||
HM10_Launchtask(TASK_HM10_CONN,5,5); // connect
|
||||
HM10_Launchtask(TASK_HM10_FEEDBACK,6,35); // get OK+CONN
|
||||
HM10_Launchtask(TASK_HM10_SUBSCR,7,20); // subscribe
|
||||
HM10_Launchtask(TASK_HM10_READ,8,35); // read
|
||||
HM10_Launchtask(TASK_HM10_READ,9,35); // read
|
||||
HM10_Launchtask(TASK_HM10_READ,10,35); // read
|
||||
HM10_Launchtask(TASK_HM10_DISCONN,11,250); // disconnect
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -134,14 +152,14 @@ void HM10SerialInit(void) {
|
|||
HM10.mode.init = false;
|
||||
HM10Serial = new TasmotaSerial(HM_PIN_RX, HM_PIN_TX, 1, 0, HM10_MAX_RX_BUF);
|
||||
if (HM10Serial->begin(115200)) {
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%sstart serial communication fixed to 115200 baud"),D_CMND_HM10);
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s start serial communication fixed to 115200 baud"),D_CMND_HM10);
|
||||
if (HM10Serial->hardwareSerial()) {
|
||||
ClaimSerial();
|
||||
DEBUG_SENSOR_LOG(PSTR("HM10: claim HW"));
|
||||
}
|
||||
HM10_Reset();
|
||||
HM10.mode.init = true;
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%sHM10_TASK_LIST initialized, now return to main loop"),D_CMND_HM10);
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s_TASK_LIST initialized, now return to main loop"),D_CMND_HM10);
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
|
@ -163,6 +181,13 @@ void HM10ParseResponse(char *buf) {
|
|||
if (!strncmp(buf,"OK",2)) {
|
||||
DEBUG_SENSOR_LOG(PSTR("HM10: got OK"));
|
||||
}
|
||||
if (!strncmp(buf,"HMSoft",6)) { //8
|
||||
const char* _fw = "000";
|
||||
memcpy((void *)_fw,(void *)(buf+8),3);
|
||||
HM10.firmware = atoi(_fw);
|
||||
DEBUG_SENSOR_LOG(PSTR("HM10: Firmware: %d"), HM10.firmware);
|
||||
}
|
||||
|
||||
else {
|
||||
DEBUG_SENSOR_LOG(PSTR("HM10: empty response"));
|
||||
}
|
||||
|
|
@ -186,7 +211,14 @@ bool HM10SerialHandleFeedback(){
|
|||
i++;
|
||||
success = true;
|
||||
}
|
||||
if(success) {
|
||||
if(HM10.mode.subscribed) {
|
||||
DEBUG_SENSOR_LOG(PSTR("HM10: raw data: %x%x%x%x%x%x%x"),ret[0],ret[1],ret[2],ret[3],ret[4],ret[5],ret[6]);
|
||||
if(ret[0] != 0 && ret[1] != 0){
|
||||
memcpy(&LYWSD03,(void *)ret,3);
|
||||
DEBUG_SENSOR_LOG(PSTR("HM10: Temperature * 100: %u, Humidity: %u"),LYWSD03.temp,LYWSD03.hum);
|
||||
}
|
||||
}
|
||||
else if(success) {
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s response: %s"),D_CMND_HM10, (char *)ret);
|
||||
HM10ParseResponse(ret);
|
||||
}
|
||||
|
|
@ -202,59 +234,92 @@ bool HM10SerialHandleFeedback(){
|
|||
|
||||
void HM10_TaskEvery100ms(){
|
||||
// AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%sHM10_TASK to be done %u"),D_CMND_HM10,HM10_TASK_LIST[0][0]);
|
||||
if (HM10_CURRENT_TASK_DELAY == 0) {
|
||||
if (HM10.current_task_delay == 0) {
|
||||
uint8_t i = 0;
|
||||
bool runningTaskLoop = true;
|
||||
while (runningTaskLoop) { // always iterate through the whole task list
|
||||
switch(HM10_TASK_LIST[i][0]) { // handle the kind of task
|
||||
case TASK_HM10_ROLE1:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s set role to 1"),D_CMND_HM10);
|
||||
HM10_CURRENT_TASK_DELAY = 5; // set task delay
|
||||
HM10.current_task_delay = 5; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+ROLE1");
|
||||
break;
|
||||
case TASK_HM10_IMME1:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s set imme to 1"),D_CMND_HM10);
|
||||
HM10_CURRENT_TASK_DELAY = 5; // set task delay
|
||||
HM10.current_task_delay = 5; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+IMME1");
|
||||
break;
|
||||
case TASK_HM10_DISC:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s set role to 1"),D_CMND_HM10);
|
||||
HM10_CURRENT_TASK_DELAY = 35; // set task delay
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s start discovery"),D_CMND_HM10);
|
||||
HM10.current_task_delay = 35; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+DISC?");
|
||||
break;
|
||||
case TASK_HM10_VERSION:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s read version"),D_CMND_HM10);
|
||||
HM10_CURRENT_TASK_DELAY = 5; // set task delay
|
||||
HM10.current_task_delay = 5; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+VERR?");
|
||||
break;
|
||||
case TASK_HM10_NAME:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s read name"),D_CMND_HM10);
|
||||
HM10_CURRENT_TASK_DELAY = 5; // set task delay
|
||||
HM10.current_task_delay = 5; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+NAME?");
|
||||
break;
|
||||
|
||||
case TASK_HM10_CONN:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s connect"),D_CMND_HM10);
|
||||
HM10.current_task_delay = 2; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+CONA4C138ED815A");
|
||||
break;
|
||||
case TASK_HM10_DISCONN:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s disconnect"),D_CMND_HM10);
|
||||
HM10.current_task_delay = 5; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT");
|
||||
HM10.mode.subscribed = false;
|
||||
break;
|
||||
case TASK_HM10_RESET:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s Reset Device"),D_CMND_HM10);
|
||||
HM10Serial->write("AT+RESET");
|
||||
HM10_CURRENT_TASK_DELAY = 5; // set task delay
|
||||
HM10.current_task_delay = 5; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
break;
|
||||
case TASK_HM10_SUBSCR:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s subscribe"),D_CMND_HM10);
|
||||
HM10.current_task_delay = 15; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+NOTIFY_ON0037");
|
||||
|
||||
case TASK_HM10_READ:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s read handle 0036"),D_CMND_HM10);
|
||||
HM10.current_task_delay = 0; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+READDATA0036?");
|
||||
HM10.mode.subscribed = true;
|
||||
case TASK_HM10_FINDALLCHARS:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s find all chars"),D_CMND_HM10);
|
||||
HM10.current_task_delay = 35; // set task delay
|
||||
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
|
||||
runningTaskLoop = false;
|
||||
HM10Serial->write("AT+FINDALLCHARS?");
|
||||
case TASK_HM10_FEEDBACK:
|
||||
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s get response"),D_CMND_HM10);
|
||||
HM10SerialHandleFeedback();
|
||||
HM10_CURRENT_TASK_DELAY = HM10_TASK_LIST[i+1][1];; // set task delay
|
||||
HM10.current_task_delay = HM10_TASK_LIST[i+1][1];; // set task delay
|
||||
HM10_TASK_LIST[i][0] = TASK_HM10_DONE; // no feedback for reset
|
||||
runningTaskLoop = false;
|
||||
break;
|
||||
|
|
@ -280,11 +345,45 @@ void HM10_TaskEvery100ms(){
|
|||
}
|
||||
}
|
||||
else {
|
||||
HM10_CURRENT_TASK_DELAY--; // count down every 100 ms
|
||||
HM10.current_task_delay--; // count down every 100 ms
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
const char HTTP_HM10[] PROGMEM =
|
||||
"{s}HM10" " Firmware " "{m}%u{e}";
|
||||
|
||||
void HM10Show(bool json)
|
||||
{
|
||||
if (HM10.firmware>0) {
|
||||
char temperature[33];
|
||||
float _temp = (float)LYWSD03.temp/100.0F;
|
||||
dtostrfd(_temp, Settings.flag2.temperature_resolution, temperature);
|
||||
char humidity[33];
|
||||
dtostrfd(LYWSD03.hum, Settings.flag2.humidity_resolution, humidity);
|
||||
|
||||
if (json) {
|
||||
ResponseAppend_P(JSON_SNS_TEMPHUM, F("LYWSD03"), temperature, humidity);
|
||||
#ifdef USE_DOMOTICZ
|
||||
if (0 == tele_period) {
|
||||
DomoticzTempHumSensor(temperature, humidity);
|
||||
}
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_KNX
|
||||
if (0 == tele_period) {
|
||||
KnxSensor(KNX_TEMPERATURE, _temp);
|
||||
KnxSensor(KNX_HUMIDITY, LYWSD03.hum);
|
||||
}
|
||||
#endif // USE_KNX
|
||||
#ifdef USE_WEBSERVER
|
||||
} else {
|
||||
WSContentSend_PD(HTTP_HM10, HM10.firmware);
|
||||
WSContentSend_PD(HTTP_SNS_TEMP, F("LYWSD03"), temperature, TempUnit());
|
||||
WSContentSend_PD(HTTP_SNS_HUM, F("LYWSD03"), humidity);
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Interface
|
||||
|
|
@ -312,6 +411,14 @@ bool Xsns92(uint8_t function)
|
|||
break;
|
||||
}
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
HM10Show(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_WEB_SENSOR:
|
||||
HM10Show(0);
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
return result;
|
||||
|
|
|
|||
Loading…
Reference in New Issue