Merge pull request #5815 from thirug010/development

New Tuya Serial Based Devices support
This commit is contained in:
Theo Arends 2019-06-08 11:17:27 +02:00 committed by GitHub
commit aaacb20d55
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 39 additions and 26 deletions

View File

@ -78,7 +78,7 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
uint32_t no_hold_retain : 1; // bit 12 (v6.4.1.19) - SetOption62 - Don't use retain flag on HOLD messages
uint32_t no_power_feedback : 1; // bit 13 (v6.5.0.9) - SetOption63 - Don't scan relay power state at restart
uint32_t use_underscore : 1; // bit 14 (v6.5.0.12) - SetOption64 - Enable "_" instead of "-" as sensor index separator
uint32_t spare15 : 1;
uint32_t tuya_show_dimmer : 1; // bit 15 (v6.5.0.12) - SetOption65 - Enable or Disable Dimmer slider control
uint32_t spare16 : 1;
uint32_t spare17 : 1;
uint32_t spare18 : 1;

View File

@ -109,6 +109,7 @@ unsigned long pulse_timer[MAX_PULSETIMERS] = { 0 }; // Power off timer
unsigned long blink_timer = 0; // Power cycle timer
unsigned long backlog_delay = 0; // Command backlog delay
power_t power = 0; // Current copy of Settings.power
power_t deviceid = 1; // hold current deviceid
power_t blink_power; // Blink power state
power_t blink_mask = 0; // Blink relay active mask
power_t blink_powersave; // Blink start power save state
@ -1652,6 +1653,8 @@ void ExecuteCommandPower(uint8_t device, uint8_t state, int source)
// ShowSource(source);
deviceid = device;
if (SONOFF_IFAN02 == my_module_type) {
blink_mask &= 1; // No blinking on the fan relays
Settings.flag.interlock = 0; // No interlock mode as it is already done by the microcontroller

View File

@ -922,7 +922,10 @@ void HandleRoot(void)
if ((LST_COLDWARM == (light_type &7)) || (LST_RGBWC == (light_type &7))) {
WSContentSend_P(HTTP_MSG_SLIDER1, LightGetColorTemp());
}
WSContentSend_P(HTTP_MSG_SLIDER2, Settings.light_dimmer);
if(Settings.flag3.tuya_show_dimmer == 0)
{
WSContentSend_P(HTTP_MSG_SLIDER2, Settings.light_dimmer);
}
}
WSContentSend_P(HTTP_TABLE100);
WSContentSend_P(PSTR("<tr>"));

View File

@ -123,11 +123,7 @@ bool TuyaSetPower(void)
int16_t source = XdrvMailbox.payload;
if (source != SRC_SWITCH && TuyaSerial) { // ignore to prevent loop from pushing state from faceplate interaction
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: SetDevicePower.rpower=%d"), rpower);
TuyaSendBool(TUYA_POWER_ID, rpower);
TuyaSendBool(deviceid, bitRead(rpower, deviceid-1));
status = true;
}
return status;
@ -146,14 +142,19 @@ void LightSerialDuty(uint8_t duty)
duty = 25; // dimming acts odd below 25(10%) - this mirrors the threshold set on the faceplate itself
}
AddLog_P2(LOG_LEVEL_DEBUG, PSTR( "TYA: Send Serial Packet Dim Value=%d (id=%d)"), duty, Settings.param[P_TUYA_DIMMER_ID]);
TuyaSendValue(Settings.param[P_TUYA_DIMMER_ID], duty);
if(Settings.flag3.tuya_show_dimmer == 0)
{
AddLog_P2(LOG_LEVEL_DEBUG, PSTR( "TYA: Send Serial Packet Dim Value=%d (id=%d)"), duty, Settings.param[P_TUYA_DIMMER_ID]);
TuyaSendValue(Settings.param[P_TUYA_DIMMER_ID], duty);
}
} else {
tuya_ignore_dim = false; // reset flag
if(Settings.flag3.tuya_show_dimmer == 0)
{
AddLog_P2(LOG_LEVEL_DEBUG, PSTR( "TYA: Send Dim Level skipped due to 0 or already set. Value=%d"), duty);
}
}
}
@ -194,30 +195,35 @@ void TuyaPacketProcess(void)
case TUYA_CMD_STATE:
if (tuya_buffer[5] == 5) { // on/off packet
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: RX - %s State"),tuya_buffer[10]?"On":"Off");
if((power || Settings.light_dimmer > 0) && (power != tuya_buffer[10])) {
/*if((power || Settings.light_dimmer > 0) && (power != tuya_buffer[10])) {
ExecuteCommandPower(1, tuya_buffer[10], SRC_SWITCH); // send SRC_SWITCH? to use as flag to prevent loop from inbound states from faceplate interaction
}
}*/
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: RX Device-%d --> MCU State: %s Current State:%s"),tuya_buffer[6],tuya_buffer[10]?"On":"Off",bitRead(power, tuya_buffer[6]-1)?"On":"Off");
if((power || Settings.light_dimmer > 0) && (tuya_buffer[10] != bitRead(power, tuya_buffer[6]-1)))
{
ExecuteCommandPower(tuya_buffer[6], tuya_buffer[10], SRC_SWITCH); // send SRC_SWITCH? to use as flag to prevent loop from inbound states from faceplate interaction
}
}
else if (tuya_buffer[5] == 8) { // dim packet
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: RX Dim State=%d"), tuya_buffer[13]);
if(Settings.flag3.tuya_show_dimmer == 0) //
{
if (!Settings.param[P_TUYA_DIMMER_ID]) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: Autoconfiguring Dimmer ID %d"), tuya_buffer[6]);
Settings.param[P_TUYA_DIMMER_ID] = tuya_buffer[6];
}
if (!Settings.param[P_TUYA_DIMMER_ID]) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: Autoconfiguring Dimmer ID %d"), tuya_buffer[6]);
Settings.param[P_TUYA_DIMMER_ID] = tuya_buffer[6];
}
tuya_new_dim = round(tuya_buffer[13] * (100. / 255.));
if((power || Settings.flag3.tuya_apply_o20) && (tuya_new_dim > 0) && (abs(tuya_new_dim - Settings.light_dimmer) > 1)) {
tuya_new_dim = round(tuya_buffer[13] * (100. / 255.));
if((power || Settings.flag3.tuya_apply_o20) && (tuya_new_dim > 0) && (abs(tuya_new_dim - Settings.light_dimmer) > 1)) {
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_DIMMER " %d"), tuya_new_dim );
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_DIMMER " %d"), tuya_new_dim );
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: Send CMND_DIMMER_STR=%s"), scmnd );
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TYA: Send CMND_DIMMER_STR=%s"), scmnd );
tuya_ignore_dim = true;
ExecuteCommand(scmnd, SRC_SWITCH);
tuya_ignore_dim = true;
ExecuteCommand(scmnd, SRC_SWITCH);
}
}
}
break;
@ -281,6 +287,7 @@ bool TuyaModuleSelected(void)
void TuyaInit(void)
{
devices_present = Settings.param[6] == 0 ? 1 : Settings.param[6];
if (!Settings.param[P_TUYA_DIMMER_ID]) {
Settings.param[P_TUYA_DIMMER_ID] = TUYA_DIMMER_ID;
}
@ -416,7 +423,7 @@ bool Xdrv16(uint8_t function)
if (tuya_heartbeat_timer > 10) {
tuya_heartbeat_timer = 0;
TuyaSendCmd(TUYA_CMD_HEARTBEAT);
}
}
break;
case FUNC_SET_CHANNELS:
result = TuyaSetChannels();