mirror of https://github.com/arendst/Tasmota.git
Add support for I2C sensor TLS2591
Add support for I2C sensor TLS2591 Light Intensity sensor (#6873)
This commit is contained in:
Theo Arends
parent
d972ca7970
commit
b31f3d82e3
|
|
@ -31,7 +31,6 @@ Index | Define | Driver | Device | Address(es) | Description
|
|||
10 | USE_BMP | xsns_09 | BME680 | 0x76 - 0x77 | Pressure, temperature, humidity and gas sensor
|
||||
11 | USE_BH1750 | xsns_10 | BH1750 | 0x23, 0x5C | Ambient light intensity sensor
|
||||
12 | USE_VEML6070 | xsns_11 | VEML6070 | 0x38 - 0x39 | Ultra violet light intensity sensor
|
||||
13 | USE_ADS1115_I2CDEV | xsns_12 | ADS1115 | 0x48 - 0x4B | 4-channel 16-bit A/D converter
|
||||
13 | USE_ADS1115 | xsns_12 | ADS1115 | 0x48 - 0x4B | 4-channel 16-bit A/D converter
|
||||
14 | USE_INA219 | xsns_13 | INA219 | 0x40 - 0x41, 0x44 - 0x45 | Low voltage current sensor
|
||||
15 | USE_SHT3X | xsns_14 | SHT3X | 0x44 - 0x45 | Temperature and Humidity sensor
|
||||
|
|
@ -63,3 +62,5 @@ Index | Define | Driver | Device | Address(es) | Description
|
|||
37 | USE_24C256 | xdrv_10 | 24C256 | 0x50 | Scripter EEPROM storage
|
||||
38 | USE_DISPLAY_ILI9488 | xdsp_08 | FT6236 | 0x38 | Touch panel controller
|
||||
39 | USE_DISPLAY_RA8876 | xdsp_10 | FT5316 | 0x38 | Touch panel controller
|
||||
40 | USE_TSL2591 | xsns_57 | TLS2591 | 0x29 | Light intensity sensor
|
||||
|
||||
|
|
|
|||
|
|
@ -4,10 +4,11 @@
|
|||
* Change supported PCF8574 I2C address range to 0x20 - 0x26 allowing other I2C devices with address 0x27 to be used at the same time
|
||||
* Change supported PCF8574A I2C address range to 0x39 - 0x3F allowing other I2C devices with address 0x38 to be used at the same time
|
||||
* Change supported MCP230xx I2C address range to 0x20 - 0x26 allowing other I2C devices with address 0x27 to be used at the same time
|
||||
* Add Keep last channels values when Color command end with '=' #6799
|
||||
* Add Keep last channels values when Color command end with '=' (#6799)
|
||||
* Add support for I2C sensor TLS2591 Light Intensity sensor (#6873)
|
||||
*
|
||||
* 7.0.0.3 20191103
|
||||
* Initial support for I2C driver runtime control using command I2CDriver and document I2CDEVICES.md
|
||||
* Add command I2cDriver for I2C driver runtime control using document I2CDEVICES.md
|
||||
* Fix random crash caused by UPNP flood
|
||||
* Add support for Honeywell HPMA115S0 particle concentration sensor by David Hunt (#6843)
|
||||
* Remove driver xsns_12_ads1115_i2cdev replaced by xsns_12_ads1115
|
||||
|
|
|
|||
|
|
@ -343,7 +343,7 @@
|
|||
#define USE_BUZZER // Add support for a buzzer (+0k6 code)
|
||||
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
||||
//#define USE_SHUTTER // Add Shutter support for up to 4 shutter with different motortypes (+6k code)
|
||||
//#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
|
||||
#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
|
||||
//#define USE_EXS_DIMMER // Add support for ES-Store WiFi Dimmer (+1k5 code)
|
||||
// #define EXS_MCU_CMNDS // Add command to send MCU commands (+0k8 code)
|
||||
|
||||
|
|
@ -371,56 +371,56 @@
|
|||
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
||||
|
||||
#ifdef USE_I2C
|
||||
#define USE_SHT // Enable SHT1X sensor (+1k4 code)
|
||||
#define USE_HTU // Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
|
||||
#define USE_BMP // Enable BMP085/BMP180/BMP280/BME280 sensors (I2C addresses 0x76 and 0x77) (+4k4 code)
|
||||
#define USE_SHT // [I2cDriver8] Enable SHT1X sensor (+1k4 code)
|
||||
#define USE_HTU // [I2cDriver9] Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
|
||||
#define USE_BMP // [I2cDriver10] Enable BMP085/BMP180/BMP280/BME280 sensors (I2C addresses 0x76 and 0x77) (+4k4 code)
|
||||
// #define USE_BME680 // Enable support for BME680 sensor using Bosch BME680 library (+4k code)
|
||||
#define USE_BH1750 // Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
|
||||
// #define USE_VEML6070 // Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+1k5 code)
|
||||
#define USE_BH1750 // [I2cDriver11] Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
|
||||
// #define USE_VEML6070 // [I2cDriver12] Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+1k5 code)
|
||||
#define USE_VEML6070_RSET 270000 // VEML6070, Rset in Ohm used on PCB board, default 270K = 270000ohm, range for this sensor: 220K ... 1Meg
|
||||
#define USE_VEML6070_SHOW_RAW // VEML6070, shows the raw value of UV-A
|
||||
// #define USE_ADS1115 // Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
|
||||
// #define USE_INA219 // Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
|
||||
// #define USE_INA226 // Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
|
||||
#define USE_SHT3X // Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
|
||||
// #define USE_TSL2561 // Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
|
||||
// #define USE_TSL2591 // Add I2C code for TSL2591 sensor
|
||||
// #define USE_MGS // Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
|
||||
// #define USE_ADS1115 // [I2cDriver13] Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
|
||||
// #define USE_INA219 // [I2cDriver14] Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
|
||||
// #define USE_INA226 // [I2cDriver35] Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
|
||||
#define USE_SHT3X // [I2cDriver15] Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
|
||||
// #define USE_TSL2561 // [I2cDriver16] Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
|
||||
// #define USE_TSL2591 // [I2cDriver40] Enable TSL2591 sensor (I2C address 0x29) using library Adafruit_TSL2591 (+1k6 code)
|
||||
// #define USE_MGS // [I2cDriver17] Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
|
||||
#define MGS_SENSOR_ADDR 0x04 // Default Mutichannel Gas sensor i2c address
|
||||
// #define USE_SGP30 // Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
|
||||
// #define USE_SI1145 // Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
|
||||
#define USE_LM75AD // Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
|
||||
// #define USE_APDS9960 // Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
|
||||
// #define USE_MCP230xx // Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
||||
// #define USE_SGP30 // [I2cDriver18] Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
|
||||
// #define USE_SI1145 // [I2cDriver19] Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
|
||||
#define USE_LM75AD // [I2cDriver20] Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
|
||||
// #define USE_APDS9960 // [I2cDriver21] Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
|
||||
// #define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
||||
// #define USE_MCP230xx_ADDR 0x20 // Enable MCP23008/MCP23017 I2C Address to use (Must be within range 0x20 through 0x26 - set according to your wired setup)
|
||||
// #define USE_MCP230xx_OUTPUT // Enable MCP23008/MCP23017 OUTPUT support through sensor29 commands (+1k5 code)
|
||||
// #define USE_MCP230xx_DISPLAYOUTPUT // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
|
||||
// #define USE_PCA9685 // Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
// #define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
// #define USE_PCA9685_ADDR 0x40 // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
|
||||
// #define USE_PCA9685_FREQ 50 // Define default PWM frequency in Hz to be used (must be within 24 to 1526) - If other value is used, it will rever to 50Hz
|
||||
// #define USE_MPR121 // Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
||||
// #define USE_CCS811 // Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
||||
// #define USE_MPU6050 // Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+3K3 of code and 188 Bytes of RAM)
|
||||
// #define USE_MPR121 // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
||||
// #define USE_CCS811 // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
||||
// #define USE_MPU6050 // [I2cDriver25] Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+3K3 of code and 188 Bytes of RAM)
|
||||
// #define USE_MPU6050_DMP // Enable in MPU6050 to use the DMP on the chip, should create better results (+8k6 of code)
|
||||
// #define USE_DS3231 // Enable DS3231 external RTC in case no Wifi is avaliable. See docs in the source file (+1k2 code)
|
||||
// #define USE_DS3231 // [I2cDriver26] Enable DS3231 external RTC in case no Wifi is avaliable. See docs in the source file (+1k2 code)
|
||||
// #define USE_RTC_ADDR 0x68 // Default I2C address 0x68
|
||||
// #define USE_MGC3130 // Enable MGC3130 Electric Field Effect Sensor (I2C address 0x42) (+2k7 code, 0k3 mem)
|
||||
// #define USE_MAX44009 // Enable MAX44009 Ambient Light sensor (I2C addresses 0x4A and 0x4B) (+0k8 code)
|
||||
// #define USE_SCD30 // Enable Sensiron SCd30 CO2 sensor (I2C address 0x61) (+3k3 code)
|
||||
// #define USE_SPS30 // Enable Sensiron SPS30 particle sensor (I2C address 0x69) (+1.7 code)
|
||||
#define USE_ADE7953 // Enable ADE7953 Energy monitor as used on Shelly 2.5 (I2C address 0x38) (+1k5)
|
||||
// #define USE_VL53L0X // Enable VL53L0x time of flight sensor (I2C address 0x29) (+4k code)
|
||||
// #define USE_MLX90614 // Enable MLX90614 ir temp sensor (I2C address 0x5a) (+0.6k code)
|
||||
// #define USE_CHIRP // Enable CHIRP soil moisture sensor (variable I2C address, default 0x20)
|
||||
// #define USE_PAJ7620 // Enable PAJ7620 gesture sensor (I2C address 0x73) (+2.5k code)
|
||||
// #define USE_PCF8574 // Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x26 and 0x39 - 0x3F) (+1k9 code)
|
||||
// #define USE_HIH6 // Enable Honeywell HIH Humidity and Temperature sensor (I2C address 0x27) (+0k6)
|
||||
// #define USE_MGC3130 // [I2cDriver27] Enable MGC3130 Electric Field Effect Sensor (I2C address 0x42) (+2k7 code, 0k3 mem)
|
||||
// #define USE_MAX44009 // [I2cDriver28] Enable MAX44009 Ambient Light sensor (I2C addresses 0x4A and 0x4B) (+0k8 code)
|
||||
// #define USE_SCD30 // [I2cDriver29] Enable Sensiron SCd30 CO2 sensor (I2C address 0x61) (+3k3 code)
|
||||
// #define USE_SPS30 // [I2cDriver30] Enable Sensiron SPS30 particle sensor (I2C address 0x69) (+1.7 code)
|
||||
#define USE_ADE7953 // [I2cDriver7] Enable ADE7953 Energy monitor as used on Shelly 2.5 (I2C address 0x38) (+1k5)
|
||||
// #define USE_VL53L0X // [I2cDriver31] Enable VL53L0x time of flight sensor (I2C address 0x29) (+4k code)
|
||||
// #define USE_MLX90614 // [I2cDriver32] Enable MLX90614 ir temp sensor (I2C address 0x5a) (+0.6k code)
|
||||
// #define USE_CHIRP // [I2cDriver33] Enable CHIRP soil moisture sensor (variable I2C address, default 0x20)
|
||||
// #define USE_PAJ7620 // [I2cDriver34] Enable PAJ7620 gesture sensor (I2C address 0x73) (+2.5k code)
|
||||
// #define USE_PCF8574 // [I2cDriver2] Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x26 and 0x39 - 0x3F) (+1k9 code)
|
||||
// #define USE_HIH6 // [I2cDriver36] Enable Honeywell HIH Humidity and Temperature sensor (I2C address 0x27) (+0k6)
|
||||
|
||||
// #define USE_DISPLAY // Add I2C Display Support (+2k code)
|
||||
#define USE_DISPLAY_MODES1TO5 // Enable display mode 1 to 5 in addition to mode 0
|
||||
#define USE_DISPLAY_LCD // [DisplayModel 1] Enable Lcd display (I2C addresses 0x27 and 0x3F) (+6k code)
|
||||
#define USE_DISPLAY_SSD1306 // [DisplayModel 2] Enable SSD1306 Oled 128x64 display (I2C addresses 0x3C and 0x3D) (+16k code)
|
||||
#define USE_DISPLAY_MATRIX // [DisplayModel 3] Enable 8x8 Matrix display (I2C adresseses see below) (+11k code)
|
||||
#define USE_DISPLAY_LCD // [DisplayModel 1] [I2cDriver3] Enable Lcd display (I2C addresses 0x27 and 0x3F) (+6k code)
|
||||
#define USE_DISPLAY_SSD1306 // [DisplayModel 2] [I2cDriver4] Enable SSD1306 Oled 128x64 display (I2C addresses 0x3C and 0x3D) (+16k code)
|
||||
#define USE_DISPLAY_MATRIX // [DisplayModel 3] [I2cDriver5] Enable 8x8 Matrix display (I2C adresseses see below) (+11k code)
|
||||
#define MTX_ADDRESS1 0x71 // [DisplayAddress1] I2C address of first 8x8 matrix module
|
||||
#define MTX_ADDRESS2 0x74 // [DisplayAddress2] I2C address of second 8x8 matrix module
|
||||
#define MTX_ADDRESS3 0x75 // [DisplayAddress3] I2C address of third 8x8 matrix module
|
||||
|
|
@ -429,7 +429,7 @@
|
|||
#define MTX_ADDRESS6 0x76 // [DisplayAddress6] I2C address of sixth 8x8 matrix module
|
||||
#define MTX_ADDRESS7 0x00 // [DisplayAddress7] I2C address of seventh 8x8 matrix module
|
||||
#define MTX_ADDRESS8 0x00 // [DisplayAddress8] I2C address of eigth 8x8 matrix module
|
||||
// #define USE_DISPLAY_SH1106 // [DisplayModel 7] Enable SH1106 Oled 128x64 display (I2C addresses 0x3C and 0x3D)
|
||||
// #define USE_DISPLAY_SH1106 // [DisplayModel 7] [I2cDriver6] Enable SH1106 Oled 128x64 display (I2C addresses 0x3C and 0x3D)
|
||||
#endif // USE_I2C
|
||||
|
||||
// -- SPI sensors ---------------------------------
|
||||
|
|
@ -442,9 +442,9 @@
|
|||
#define USE_DISPLAY_ILI9341 // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
|
||||
// #define USE_DISPLAY_EPAPER_29 // [DisplayModel 5] Enable e-paper 2.9 inch display (+19k code)
|
||||
// #define USE_DISPLAY_EPAPER_42 // [DisplayModel 6] Enable e-paper 4.2 inch display
|
||||
// #define USE_DISPLAY_ILI9488 // [DisplayModel 8]
|
||||
// #define USE_DISPLAY_ILI9488 // [DisplayModel 8] [I2cDriver38] (Touch)
|
||||
// #define USE_DISPLAY_SSD1351 // [DisplayModel 9]
|
||||
// #define USE_DISPLAY_RA8876 // [DisplayModel 10]
|
||||
// #define USE_DISPLAY_RA8876 // [DisplayModel 10] [I2cDriver39] (Touch)
|
||||
#endif // USE_SPI
|
||||
|
||||
// -- Serial sensors ------------------------------
|
||||
|
|
|
|||
|
|
@ -130,7 +130,7 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
//#define USE_INA226 // Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
|
||||
#define USE_SHT3X // Add I2C code for SHT3x sensor (+0k6 code)
|
||||
#define USE_TSL2561 // Add I2C code for TSL2561 sensor using library Adafruit TSL2561 Arduino (+1k2 code)
|
||||
//#define USE_TSL2591 // Add I2C code for TSL2591 sensor
|
||||
//#define USE_TSL2591 // Add I2C code for TSL2591 sensor library Adafruit_TSL2591 (+1k6 code)
|
||||
#define USE_MGS // Add I2C code for Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
|
||||
#define USE_SGP30 // Add I2C code for SGP30 sensor (+1k1 code)
|
||||
//#define USE_SI1145 // Add I2C code for SI1145/46/47 sensor (+1k code)
|
||||
|
|
|
|||
|
|
@ -1,5 +1,7 @@
|
|||
/*
|
||||
xsns_57_tsl2591.ino - TSL2591 light sensor support for Sonoff-Tasmota
|
||||
xsns_57_tsl2591.ino - TSL2591 light sensor support for Tasmota
|
||||
|
||||
Copyright (C) 2019 Markus Bösling and Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -21,9 +23,13 @@
|
|||
* TSL2591 - Light Intensity
|
||||
*
|
||||
* I2C Addresses: 0x29 (low), 0x39 (float) or 0x49 (high)
|
||||
* (Used library supports address 0x29 only)
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XSNS_57 57
|
||||
#define XI2C_40 40 // See I2CDEVICES.md
|
||||
|
||||
#define TSL2591_ADDRESS 0x29 // Used library only supports this address only
|
||||
|
||||
#include <Adafruit_TSL2591.h>
|
||||
|
||||
|
|
@ -35,13 +41,15 @@ float tsl2591_lux = 0;
|
|||
|
||||
void Tsl2591Init(void)
|
||||
{
|
||||
if (tsl2591_type) {
|
||||
return;
|
||||
}
|
||||
if (tsl.begin()) {
|
||||
tsl.setGain(TSL2591_GAIN_MED);
|
||||
tsl.setTiming(TSL2591_INTEGRATIONTIME_300MS);
|
||||
tsl2591_type = 1;
|
||||
if (tsl2591_type) { return; }
|
||||
|
||||
if (I2cSetDevice(0x29) || I2cSetDevice(0x39) || I2cSetDevice(0x49)) {
|
||||
if (tsl.begin()) {
|
||||
tsl.setGain(TSL2591_GAIN_MED);
|
||||
tsl.setTiming(TSL2591_INTEGRATIONTIME_300MS);
|
||||
tsl2591_type = 1;
|
||||
I2cSetActiveFound(TSL2591_ADDRESS, "TSL2591");
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -57,7 +65,9 @@ bool Tsl2591Read(void)
|
|||
|
||||
void Tsl2591EverySecond(void)
|
||||
{
|
||||
Tsl2591Read();
|
||||
if (tsl2591_type) {
|
||||
Tsl2591Read();
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef USE_WEBSERVER
|
||||
|
|
@ -89,25 +99,25 @@ void Tsl2591Show(bool json)
|
|||
|
||||
bool Xsns57(uint8_t function)
|
||||
{
|
||||
if (!I2cEnabled(XI2C_40)) { return false; }
|
||||
|
||||
bool result = false;
|
||||
|
||||
if (i2c_flg) {
|
||||
switch (function) {
|
||||
case FUNC_INIT:
|
||||
Tsl2591Init();
|
||||
break;
|
||||
case FUNC_EVERY_SECOND:
|
||||
Tsl2591EverySecond();
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
Tsl2591Show(1);
|
||||
break;
|
||||
switch (function) {
|
||||
case FUNC_EVERY_SECOND:
|
||||
Tsl2591EverySecond();
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
Tsl2591Show(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_WEB_SENSOR:
|
||||
Tsl2591Show(0);
|
||||
break;
|
||||
case FUNC_WEB_SENSOR:
|
||||
Tsl2591Show(0);
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
case FUNC_INIT:
|
||||
Tsl2591Init();
|
||||
break;
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue