Merge pull request #1 from kueblc/sm16716

Integrate with xdrv_04_light.ino

sonoff/language/bg-BG.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/cs-CZ.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/de-DE.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/el-GR.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/en-GB.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/es-AR.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/fr-FR.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/he-HE.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/hu-HU.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/it-IT.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/nl-NL.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/pl-PL.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/pt-BR.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/pt-PT.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/ru-RU.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "А"

sonoff/language/sk-SK.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/sv-SE.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/tr-TR.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/uk-UK.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "А"

sonoff/language/zh-CN.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "安"

sonoff/language/zh-TW.h

@@ -546,6 +546,7 @@
 #define D_SENSOR_MAX31855_DO  "MAX31855 DO"
 #define D_SENSOR_SM16716_CLK "SM16716 CLK"
 #define D_SENSOR_SM16716_DAT "SM16716 DAT"
+#define D_SENSOR_SM16716_SEL "SM16716 SEL"
 
 // Units
 #define D_UNIT_AMPERE "安"

sonoff/sonoff.ino

@@ -2422,6 +2422,12 @@ void GpioInit(void)
     light_type = LT_WS2812;
   }
 #endif  // USE_WS2812
+#ifdef USE_SM16716
+  if (SM16716_ModuleSelected()) {
+    light_type += 3;
+    light_type |= 16;
+  }
+#endif  // ifdef USE_SM16716
   if (!light_type) {
     for (uint8_t i = 0; i < MAX_PWMS; i++) {     // Basic PWM control only
       if (pin[GPIO_PWM1 +i] < 99) {

sonoff/sonoff_template.h

@@ -154,8 +154,9 @@ enum UserSelectablePins {
   GPIO_KEY2_INV_NP,
   GPIO_KEY3_INV_NP,
   GPIO_KEY4_INV_NP,
-  GPIO_SM16716_CLK,    // SM16716 CLK
+  GPIO_SM16716_CLK,    // SM16716 CLOCK
-  GPIO_SM16716_DAT,    // SM16716 DAT
+  GPIO_SM16716_DAT,    // SM16716 DATA
+  GPIO_SM16716_SEL,    // SM16716 SELECT
   GPIO_SENSOR_END };
 
 // Programmer selectable GPIO functionality offset by user selectable GPIOs
@@ -221,8 +222,8 @@ const char kSensorNames[] PROGMEM =
   D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|"
   D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|"
   D_SENSOR_BUTTON "1i|" D_SENSOR_BUTTON "2i|" D_SENSOR_BUTTON "3i|" D_SENSOR_BUTTON "4i|"
-  D_SENSOR_BUTTON "1in|" D_SENSOR_BUTTON "2in|" D_SENSOR_BUTTON "3in|" D_SENSOR_BUTTON "4in"
+  D_SENSOR_BUTTON "1in|" D_SENSOR_BUTTON "2in|" D_SENSOR_BUTTON "3in|" D_SENSOR_BUTTON "4in|"
-  D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT
+  D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_SEL
   ;
 
 /********************************************************************************************/
@@ -530,8 +531,9 @@ const uint8_t kGpioNiceList[] PROGMEM = {
   GPIO_MAX31855DO,     // MAX31855 Serial interface
 #endif
 #ifdef USE_SM16716
-  GPIO_SM16716_CLK,    // SM16716 CLK
+  GPIO_SM16716_CLK,    // SM16716 CLOCK
-  GPIO_SM16716_DAT,    // SM16716 DAT
+  GPIO_SM16716_DAT,    // SM16716 DATA
+  GPIO_SM16716_SEL,    // SM16716 SELECT
 #endif // USE_SM16716
 };
 

sonoff/xdrv_04_light.ino

@@ -32,6 +32,9 @@
  * 11          +WS2812    RGB(W) no         (One WS2812 RGB or RGBW ledstrip)
  * 12          AiLight    RGBW   no
  * 13          Sonoff B1  RGBCW  yes
+ * 19          SM16716    RGB    no
+ * 20          SM16716+W  RGBW   no
+ * 21          SM16716+CW RGBCW  yes
  *
  * light_scheme  WS2812  3+ Colors  1+2 Colors  Effect
  * ------------  ------  ---------  ----------  -----------------
@@ -354,6 +357,110 @@ void LightMy92x1Duty(uint8_t duty_r, uint8_t duty_g, uint8_t duty_b, uint8_t dut
   os_delay_us(12);                      // TStop > 12us.
 }
 
+#ifdef USE_SM16716
+/*********************************************************************************************\
+ * SM16716 - Controlling RGB over a synchronous serial line
+ * Copyright (C) 2019  Gabor Simon
+ *
+ * Source: https://community.home-assistant.io/t/cheap-uk-wifi-bulbs-with-tasmota-teardown-help-tywe3s/40508/27
+ *
+\*********************************************************************************************/
+
+// Enable this for debug logging
+#define D_LOG_SM16716       "SM16716: "
+
+uint8_t sm16716_pin_clk     = 100;
+uint8_t sm16716_pin_dat     = 100;
+uint8_t sm16716_pin_sel     = 100;
+
+void SM16716_SendBit(uint8_t v)
+{
+  /* NOTE:
+   * According to the spec sheet, max freq is 30 MHz, that is 16.6 ns per high/low half of the
+   * clk square wave. That is less than the overhead of 'digitalWrite' at this clock rate,
+   * so no additional delays are needed yet. */
+
+  digitalWrite(sm16716_pin_dat, (v != 0) ? HIGH : LOW);
+  //delayMicroseconds(1);
+  digitalWrite(sm16716_pin_clk, HIGH);
+  //delayMicroseconds(1);
+  digitalWrite(sm16716_pin_clk, LOW);
+}
+
+void SM16716_SendByte(uint8_t v)
+{
+  uint8_t mask;
+
+  for (mask = 0x80; mask; mask >>= 1) {
+    SM16716_SendBit(v & mask);
+  }
+}
+
+void SM16716_Update(uint8_t duty_r, uint8_t duty_g, uint8_t duty_b)
+{
+  if (sm16716_pin_sel < 99) {
+    if (duty_r | duty_g | duty_b) {
+#ifdef D_LOG_SM16716
+      snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_SM16716 "turning color on"));
+      AddLog(LOG_LEVEL_DEBUG);
+#endif // D_LOG_SM16716
+      digitalWrite(sm16716_pin_sel, HIGH);
+      delayMicroseconds(20);
+      SM16716_Init();
+    } else {
+#ifdef D_LOG_SM16716
+      snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_SM16716 "turning color off"));
+      AddLog(LOG_LEVEL_DEBUG);
+#endif // D_LOG_SM16716
+      digitalWrite(sm16716_pin_sel, LOW);
+    }
+  }
+#ifdef D_LOG_SM16716
+  snprintf_P(log_data, sizeof(log_data),
+      PSTR(D_LOG_SM16716 "Update; rgb=%02x%02x%02x"),
+      duty_r, duty_g, duty_b);
+  AddLog(LOG_LEVEL_DEBUG);
+#endif // D_LOG_SM16716
+
+  // send start bit
+  SM16716_SendBit(1);
+  // send 24-bit rgb data
+  SM16716_SendByte(duty_r);
+  SM16716_SendByte(duty_g);
+  SM16716_SendByte(duty_b);
+  // send a 'do it' pulse
+  // (if multiple chips are chained, each one processes the 1st '1rgb' 25-bit block and
+  // passes on the rest, right until the one starting with 0)
+  //SM16716_Init();
+  SM16716_SendBit(0);
+  SM16716_SendByte(0);
+  SM16716_SendByte(0);
+  SM16716_SendByte(0);
+}
+
+bool SM16716_ModuleSelected(void)
+{
+  sm16716_pin_clk = pin[GPIO_SM16716_CLK];
+  sm16716_pin_dat = pin[GPIO_SM16716_DAT];
+  sm16716_pin_sel = pin[GPIO_SM16716_SEL];
+#ifdef D_LOG_SM16716
+  snprintf_P(log_data, sizeof(log_data),
+      PSTR(D_LOG_SM16716 "ModuleSelected; clk_pin=%d, dat_pin=%d)"),
+      sm16716_pin_clk, sm16716_pin_dat);
+  AddLog(LOG_LEVEL_DEBUG);
+#endif // D_LOG_SM16716
+  return (sm16716_pin_clk < 99) && (sm16716_pin_dat < 99);
+}
+
+void SM16716_Init(void)
+{
+  for (uint8_t t_init = 0; t_init < 50; ++t_init) {
+    SM16716_SendBit(0);
+  }
+}
+
+#endif  // ifdef USE_SM16716
+
 /********************************************************************************************/
 
 void LightInit(void)
@@ -402,6 +509,30 @@ void LightInit(void)
     max_scheme = LS_MAX + WS2812_SCHEMES;
   }
 #endif  // USE_WS2812 ************************************************************************
+#ifdef USE_SM16716
+  else if (16 & light_type) {
+    // init PWM
+    for (uint8_t i = 0; i < light_subtype; i++) {
+      Settings.pwm_value[i] = 0;        // Disable direct PWM control
+      if (pin[GPIO_PWM1 +i] < 99) {
+        pinMode(pin[GPIO_PWM1 +i], OUTPUT);
+      }
+    }
+    // init sm16716
+    pinMode(sm16716_pin_clk, OUTPUT);
+    digitalWrite(sm16716_pin_clk, LOW);
+
+    pinMode(sm16716_pin_dat, OUTPUT);
+    digitalWrite(sm16716_pin_dat, LOW);
+
+    if (sm16716_pin_sel < 99) {
+      pinMode(sm16716_pin_sel, OUTPUT);
+      digitalWrite(sm16716_pin_sel, LOW);
+    }
+
+    SM16716_Init();
+  }
+#endif  // ifdef USE_SM16716
   else {
     light_pdi_pin = pin[GPIO_DI];
     light_pdcki_pin = pin[GPIO_DCKI];
@@ -844,6 +975,22 @@ void LightAnimate(void)
         Ws2812SetColor(0, cur_col[0], cur_col[1], cur_col[2], cur_col[3]);
       }
 #endif  // USE_ES2812 ************************************************************************
+#ifdef USE_SM16716
+      else if (16 & light_type) {
+        for (uint8_t i = 3; i < light_subtype; i++) {
+          if (pin[GPIO_PWM1 +i-3] < 99) {
+            if (cur_col[i] > 0xFC) {
+              cur_col[i] = 0xFC;   // Fix unwanted blinking and PWM watchdog errors for values close to pwm_range (H801, Arilux and BN-SZ01)
+            }
+            uint16_t curcol = cur_col[i] * (Settings.pwm_range / 255);
+//            snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION "Cur_Col%d %d, CurCol %d"), i, cur_col[i], curcol);
+//            AddLog(LOG_LEVEL_DEBUG);
+            analogWrite(pin[GPIO_PWM1 +i-3], bitRead(pwm_inverted, i-3) ? Settings.pwm_range - curcol : curcol);
+          }
+        }
+        SM16716_Update(cur_col[0], cur_col[1], cur_col[2]);
+      }
+#endif  // ifdef USE_SM16716
       else if (light_type > LT_WS2812) {
         LightMy92x1Duty(cur_col[0], cur_col[1], cur_col[2], cur_col[3], cur_col[4]);
       }

sonoff/xdrv_20_sm16717.ino

@@ -1,400 +0,0 @@
-/*
-  xdrv_20_sm16716.ino - SM16716 RGB led controller support for Sonoff-Tasmota
-
-  Copyright (C) 2019  Gabor Simon
-
-  This program is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 3 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifdef USE_SM16716
-
-/*********************************************************************************************\
- * SM16716 - Controlling RGB over a synchronous serial line
- *
- * Source: https://community.home-assistant.io/t/cheap-uk-wifi-bulbs-with-tasmota-teardown-help-tywe3s/40508/27
- *
-\*********************************************************************************************/
-
-#define XDRV_20             20
-
-// Enable this for debug logging
-//#define D_LOG_SM16716       "SM16716: "
-
-enum SM16716_Commands {
-  CMND_SM16716_COLOR };
-
-const char k_SM16716_Commands[] PROGMEM =
-  D_CMND_COLOR ;
-
-uint8_t sm16716_pin_clk     = 100;
-uint8_t sm16716_pin_dat     = 100;
-
-bool sm16716_is_selected = false;
-bool sm16716_is_on       = false;
-uint8_t sm16716_color[3]    = {0, 0, 0};
-int8_t sm16716_color_preset = 0;
-
-
-/*********************************************************************************************/
-void SM16716_SendBit(uint8_t v)
-{
-  /* NOTE:
-   * According to the spec sheet, max freq is 30 MHz, that is 16.6 ns per high/low half of the
-   * clk square wave. That is less than the overhead of 'digitalWrite' at this clock rate,
-   * so no additional delays are needed yet. */
-
-  digitalWrite(sm16716_pin_dat, (v != 0) ? HIGH : LOW);
-  //delayMicroseconds(1);
-  digitalWrite(sm16716_pin_clk, HIGH);
-  //delayMicroseconds(1);
-  digitalWrite(sm16716_pin_clk, LOW);
-}
-
-
-/*********************************************************************************************/
-void SM16716_SendByte(uint8_t v)
-{
-  uint8_t mask;
-
-  for (mask = 0x80; mask; mask >>= 1) {
-    SM16716_SendBit(v & mask);
-  }
-}
-
-
-/*********************************************************************************************/
-void SM16716_Append_JSON(void)
-{
-  snprintf_P(mqtt_data, sizeof(mqtt_data),
-      PSTR("%s,\"SM16716\":{\"Red\":%d,\"Green\":%d,\"Blue\":%d}"),
-      mqtt_data, sm16716_color[0], sm16716_color[1], sm16716_color[2]);
-}
-
-
-/*********************************************************************************************/
-bool SM16716_Show_State(void)
-{
-  snprintf_P(mqtt_data, sizeof(mqtt_data),
-      PSTR("{\"" D_CMND_COLOR "\":\"%02x%02x%02x\"}"),
-      sm16716_color[0], sm16716_color[1], sm16716_color[2]);
-  return true;
-}
-
-
-/*********************************************************************************************/
-void SM16716_Update()
-{
-#ifdef D_LOG_SM16716
-  snprintf_P(log_data, sizeof(log_data),
-      PSTR(D_LOG_SM16716 "Update; pwr=%02x, rgb=%02x%02x%02x"),
-      sm16716_is_on, sm16716_color[0], sm16716_color[1], sm16716_color[2]);
-  AddLog(LOG_LEVEL_DEBUG);
-#endif // D_LOG_SM16716
-
-  // send start bit
-  SM16716_SendBit(1);
-  // send 24-bit rgb data
-  if (sm16716_is_on) {
-    SM16716_SendByte(sm16716_color[0]);
-    SM16716_SendByte(sm16716_color[1]);
-    SM16716_SendByte(sm16716_color[2]);
-  }
-  else {
-    SM16716_SendByte(0);
-    SM16716_SendByte(0);
-    SM16716_SendByte(0);
-  }
-  // send a 'do it' pulse
-  // (if multiple chips are chained, each one processes the 1st '1rgb' 25-bit block and
-  // passes on the rest, right until the one starting with 0)
-  SM16716_SendBit(0);
-  SM16716_SendByte(0);
-  SM16716_SendByte(0);
-  SM16716_SendByte(0);
-  SM16716_Show_State();
-}
-
-
-/*********************************************************************************************/
-bool SM16716_ModuleSelected(void)
-{
-  sm16716_pin_clk = pin[GPIO_SM16716_CLK];
-  sm16716_pin_dat = pin[GPIO_SM16716_DAT];
-#ifdef D_LOG_SM16716
-  snprintf_P(log_data, sizeof(log_data),
-      PSTR(D_LOG_SM16716 "ModuleSelected; clk_pin=%d, dat_pin=%d)"),
-      sm16716_pin_clk, sm16716_pin_dat);
-  AddLog(LOG_LEVEL_DEBUG);
-#endif // D_LOG_SM16716
-  sm16716_is_selected = (sm16716_pin_clk < 99) && (sm16716_pin_dat < 99);
-  return sm16716_is_selected;
-}
-
-
-/*********************************************************************************************/
-bool SM16716_Init(void)
-{
-  uint8_t t_init;
-
-  if (!SM16716_ModuleSelected()) {
-    return false;
-  }
-
-  pinMode(sm16716_pin_clk, OUTPUT);
-  digitalWrite(sm16716_pin_clk, LOW);
-
-  pinMode(sm16716_pin_dat, OUTPUT);
-  digitalWrite(sm16716_pin_dat, LOW);
-
-  for (t_init = 0; t_init < 50; ++t_init) {
-    SM16716_SendBit(0);
-  }
-
-  return true;
-}
-
-
-/*********************************************************************************************/
-/* Try to parse a string as 'RRGGBB' hex-encoded color value
- * Accept only exact match (i.e. there can be no leftover chars)
- */
-bool SM16716_Parse_RRGGBB(const char *data, int data_len) {
-  char component[3];
-  char *endptr = NULL;
-  uint8_t candidate[3];
-  int i;
-
-#ifdef D_LOG_SM16716
-  snprintf_P(log_data, sizeof(log_data),
-      PSTR(D_LOG_SM16716 "Parse_RRGGBB; data='%s', data_len=%d"),
-      data, data_len);
-  AddLog(LOG_LEVEL_DEBUG);
-#endif // D_LOG_SM16716
-
-  if (data_len != 6) {
-    // too long or too short
-    return false;
-  }
-
-  // a component is exactly 3 chars, so terminate the string now
-  component[2] = '\0';
-
-  // try to parse 3 components
-  for (i = 0; i < 3; ++i) {
-    // copy the value to the temp string
-    component[0] = data[0];
-    component[1] = data[1];
-    // try to interpret it as a hex number
-    candidate[i] = (uint8_t)strtoul(component, &endptr, 16);
-    if (!endptr || *endptr) {
-      // not a valid hex number
-      return false;
-    }
-    // advance to the next 2 characters
-    data += 2;
-  }
-
-  // now that we have all 3, we may change sm16716_color[]
-  sm16716_color[0] = candidate[0];
-  sm16716_color[1] = candidate[1];
-  sm16716_color[2] = candidate[2];
-  return true;
-}
-
-
-/*********************************************************************************************/
-bool SM16716_Parse_Color(char *data, int data_len) {
-  /* NOTE: Very similar to 'LightColorEntry', but can't reuse it here, because 
-   * 'light_type' must be PWM, and then it won't parse the color components. */
-
-#ifdef D_LOG_SM16716
-  snprintf_P(log_data, sizeof(log_data),
-      PSTR(D_LOG_SM16716 "Parse_Color; data='%s', data_len=%d"),
-      data, data_len);
-  AddLog(LOG_LEVEL_DEBUG);
-#endif // D_LOG_SM16716
-
-  if (data_len < 3) { // too short for color literal: try to interpret as a color preset
-    // check for '+' and '-' commands first
-    switch (data[0]) {
-      case '+': // advance to the next preset, handle wrap-around
-        ++sm16716_color_preset;
-        if (sm16716_color_preset >= MAX_FIXED_COLOR) {
-          sm16716_color_preset = 0;
-        }
-        break;
-
-      case '-': // return to the previous preset, handle wrap-around
-        --sm16716_color_preset;
-        if (sm16716_color_preset < 0) {
-          sm16716_color_preset = MAX_FIXED_COLOR - 1;
-        }
-        break;
-
-      default:
-        // try to interpret it as a decimal integer
-        {
-          char *endptr = NULL;
-          uint8_t candidate = (uint8_t)strtoul(data, &endptr, 10);
-          if (!endptr || *endptr || (candidate < 0) || (MAX_FIXED_COLOR <= candidate)) {
-            // it's not a valid integer (and nothing else), or the number is not a valid preset index
-            return false;
-          }
-          // we have the requested preset index
-          sm16716_color_preset = candidate;
-        }
-        break;
-    }
-
-#ifdef D_LOG_SM16716
-    snprintf_P(log_data, sizeof(log_data),
-        PSTR(D_LOG_SM16716 "Parse_Color; preset=%d"),
-        sm16716_color_preset);
-    AddLog(LOG_LEVEL_DEBUG);
-#endif // D_LOG_SM16716
-
-    // copy the requested preset values
-    memcpy_P(sm16716_color, &kFixedColor[sm16716_color_preset], 3);
-  }
-  else if (data[0] == '#') { // starts with #, so try to interpret as #RRGGBB
-    if (!SM16716_Parse_RRGGBB(data + 1, data_len - 1)) {
-      // not a valid RRGGBB after the #
-      return false;
-    }
-  }
-  // two more formats left: RRGGBB (without #) and comma separated color components
-  else if (SM16716_Parse_RRGGBB(data, data_len)) { // try to interpret as RRGGBB
-    // parsed successfully as RRGGBB, nothing more to do
-  }
-  else { // try to interpret as rrr,g,bb
-    uint8_t candidate[3];
-    char *tok, *last, *endptr = NULL;
-    int i;
-
-    // try to parse the first 3 comma-separated tokens
-    for (i = 0; i < 3; ++i) {
-      // try to isolate the next token
-      tok = strtok_r(data, ",", &last);
-      if (!tok) {
-        // we're beyond the end of string: there were too few tokens
-        return false;
-      }
-      // try to interpret the token as integer
-      candidate[i] = (uint8_t)strtoul(tok, &endptr, 0);
-      if (!endptr || *endptr) {
-        // not a valid integer
-        return false;
-      }
-      // in the next cycle just continue this token-processing session
-      data = NULL;
-    }
-    // there shouldn't be any leftover characters (i.e. we need exactly 3 components)
-    tok = strtok_r(NULL, ",", &last);
-    if (tok) {
-      // too many components
-      return false;
-    }
-    // now that we have all 3 components, we may change sm16716_color
-    sm16716_color[0] = candidate[0];
-    sm16716_color[1] = candidate[1];
-    sm16716_color[2] = candidate[2];
-  }
-  return true;
-}
-
-
-/*********************************************************************************************/
-bool SM16716_Command(void)
-{
-  char command [CMDSZ];
-  int command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic, k_SM16716_Commands);
-
-#ifdef D_LOG_SM16716
-  snprintf_P(log_data, sizeof(log_data),
-      PSTR(D_LOG_SM16716 "Command; topic='%s', data_len=%d, data='%s', code=%d"),
-      XdrvMailbox.topic, XdrvMailbox.data_len, XdrvMailbox.data, command_code);
-  AddLog(LOG_LEVEL_DEBUG);
-#endif // D_LOG_SM16716
-
-  switch (command_code) {
-    case CMND_SM16716_COLOR:
-      if (XdrvMailbox.data_len == 0) {
-        return SM16716_Show_State();
-      }
-      if (!SM16716_Parse_Color(XdrvMailbox.data, XdrvMailbox.data_len)) {
-        return false;
-      }
-      SM16716_Update();
-      return true;
-  }
-  return false; // Unknown command
-}
-
-
-/*********************************************************************************************\
- * Interface
-\*********************************************************************************************/
-bool Xdrv20(uint8_t function)
-{
-  if (function == FUNC_MODULE_INIT) {
-      return SM16716_ModuleSelected();
-  }
-
-  if (!sm16716_is_selected) {
-    return false;
-  }
-
-  switch (function) {
-    case FUNC_INIT:
-#ifdef D_LOG_SM16716
-      snprintf_P(log_data, sizeof(log_data),
-          PSTR(D_LOG_SM16716 "Entry; function=FUNC_INIT"));
-      AddLog(LOG_LEVEL_DEBUG);
-#endif
-      return SM16716_Init();
-
-    case FUNC_COMMAND:
-#ifdef D_LOG_SM16716
-      snprintf_P(log_data, sizeof(log_data),
-          PSTR(D_LOG_SM16716 "Entry; function=FUNC_COMMAND"));
-      AddLog(LOG_LEVEL_DEBUG);
-#endif
-      return SM16716_Command();
-
-    //case FUNC_SET_POWER:
-    case FUNC_SET_DEVICE_POWER:
-#ifdef D_LOG_SM16716
-      snprintf_P(log_data, sizeof(log_data),
-          PSTR(D_LOG_SM16716 "Entry; function=FUNC_SET_DEVICE_POWER, index=%02x, payload=%02x"),
-          XdrvMailbox.index, XdrvMailbox.payload);
-      AddLog(LOG_LEVEL_DEBUG);
-#endif
-      sm16716_is_on = (XdrvMailbox.index != 0);
-      SM16716_Update();
-      return false; // don't catch the event
-
-    case FUNC_JSON_APPEND:
-#ifdef D_LOG_SM16716
-      snprintf_P(log_data, sizeof(log_data),
-          PSTR(D_LOG_SM16716 "Entry; function=FUNC_JSON_APPEND"));
-      AddLog(LOG_LEVEL_DEBUG);
-#endif
-      SM16716_Append_JSON();
-      break;
-  }
-  return false;
-}
-
-#endif // USE_SM16716
-// vim: set ft=c sw=2 ts=2 et: