mirror of https://github.com/arendst/Tasmota.git
Remove obsolete file
This commit is contained in:
Theo Arends
parent
7eef26737c
commit
c2f8730b1e
|
|
@ -1,586 +0,0 @@
|
|||
/*
|
||||
user_config_override.h - user configuration overrides my_user_config.h for Tasmota
|
||||
|
||||
Copyright (C) 2020 Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _USER_CONFIG_OVERRIDE_H_
|
||||
#define _USER_CONFIG_OVERRIDE_H_
|
||||
|
||||
// force the compiler to show a warning to confirm that this file is included
|
||||
#warning **** user_config_override.h: Using Settings from this File ****
|
||||
|
||||
/*****************************************************************************************************\
|
||||
* USAGE:
|
||||
* To modify the stock configuration without changing the my_user_config.h file:
|
||||
* (1) copy this file to "user_config_override.h" (It will be ignored by Git)
|
||||
* (2) define your own settings below
|
||||
* (3) for platformio:
|
||||
* All done.
|
||||
* for Arduino IDE:
|
||||
* enable define USE_CONFIG_OVERRIDE in my_user_config.h
|
||||
******************************************************************************************************
|
||||
* ATTENTION:
|
||||
* - Changes to SECTION1 PARAMETER defines will only override flash settings if you change define CFG_HOLDER.
|
||||
* - Expect compiler warnings when no ifdef/undef/endif sequence is used.
|
||||
* - You still need to update my_user_config.h for major define USE_MQTT_TLS.
|
||||
* - All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.
|
||||
\*****************************************************************************************************/
|
||||
|
||||
/*
|
||||
Examples :
|
||||
|
||||
// -- Master parameter control --------------------
|
||||
#undef CFG_HOLDER
|
||||
#define CFG_HOLDER 4617 // [Reset 1] Change this value to load SECTION1 configuration parameters to flash
|
||||
|
||||
// -- Setup your own Wifi settings ---------------
|
||||
#undef STA_SSID1
|
||||
#define STA_SSID1 "YourSSID" // [Ssid1] Wifi SSID
|
||||
|
||||
#undef STA_PASS1
|
||||
#define STA_PASS1 "YourWifiPassword" // [Password1] Wifi password
|
||||
|
||||
// -- Setup your own MQTT settings ---------------
|
||||
#undef MQTT_HOST
|
||||
#define MQTT_HOST "your-mqtt-server.com" // [MqttHost]
|
||||
|
||||
#undef MQTT_PORT
|
||||
#define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT)
|
||||
|
||||
#undef MQTT_USER
|
||||
#define MQTT_USER "YourMqttUser" // [MqttUser] Optional user
|
||||
|
||||
#undef MQTT_PASS
|
||||
#define MQTT_PASS "YourMqttPass" // [MqttPassword] Optional password
|
||||
|
||||
// You might even pass some parameters from the command line ----------------------------
|
||||
// Ie: export PLATFORMIO_BUILD_FLAGS='-DUSE_CONFIG_OVERRIDE -DMY_IP="192.168.1.99" -DMY_GW="192.168.1.1" -DMY_DNS="192.168.1.1"'
|
||||
|
||||
#ifdef MY_IP
|
||||
#undef WIFI_IP_ADDRESS
|
||||
#define WIFI_IP_ADDRESS MY_IP // Set to 0.0.0.0 for using DHCP or enter a static IP address
|
||||
#endif
|
||||
|
||||
#ifdef MY_GW
|
||||
#undef WIFI_GATEWAY
|
||||
#define WIFI_GATEWAY MY_GW // if not using DHCP set Gateway IP address
|
||||
#endif
|
||||
|
||||
#ifdef MY_DNS
|
||||
#undef WIFI_DNS
|
||||
#define WIFI_DNS MY_DNS // If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)
|
||||
#endif
|
||||
|
||||
*/
|
||||
|
||||
#define UPGRADE_V8_MIN // drop support for pre-v8.0
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Undef all modules first, then enable one by one if needed
|
||||
\*********************************************************************************************/
|
||||
|
||||
#undef USE_ARDUINO_OTA // Disable support for Arduino OTA
|
||||
#undef USE_DOMOTICZ // Disable Domoticz
|
||||
#undef USE_HOME_ASSISTANT // Disable Home Assistant
|
||||
#undef USE_MQTT_TLS // Disable TLS support won't work as the MQTTHost is not set
|
||||
#undef USE_KNX // Disable KNX IP Protocol Support
|
||||
#undef USE_WEBSERVER // Disable Webserver
|
||||
#undef USE_WEBSEND_RESPONSE // Disable command WebSend response message (+1k code)
|
||||
#undef USE_EMULATION // Disable Wemo or Hue emulation
|
||||
#undef USE_EMULATION_HUE // Disable Hue Bridge emulation for Alexa (+14k code, +2k mem common)
|
||||
#undef USE_EMULATION_WEMO // Disable Belkin WeMo emulation for Alexa (+6k code, +2k mem common)
|
||||
#undef USE_CUSTOM // Disable Custom features
|
||||
#undef USE_DISCOVERY // Disable Discovery services for both MQTT and web server
|
||||
#undef USE_TIMERS // Disable support for up to 16 timers
|
||||
#undef USE_TIMERS_WEB // Disable support for timer webpage
|
||||
#undef USE_SUNRISE // Disable support for Sunrise and sunset tools
|
||||
#undef USE_RULES // Disable support for rules
|
||||
#undef USE_SCRIPT // Add support for script (+17k code)
|
||||
|
||||
// -- Optional modules -------------------------
|
||||
#undef ROTARY_V1 // Disable support for MI Desk Lamp
|
||||
#undef USE_SONOFF_RF // Disable support for Sonoff Rf Bridge (+3k2 code)
|
||||
#undef USE_RF_FLASH // Disable support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB
|
||||
#undef USE_SONOFF_SC // Disable support for Sonoff Sc (+1k1 code)
|
||||
#undef USE_TUYA_MCU // Disable support for Tuya Serial MCU
|
||||
#undef USE_ARMTRONIX_DIMMERS // Disable support for Armtronix Dimmers (+1k4 code)
|
||||
#undef USE_PS_16_DZ // Disable support for PS-16-DZ Dimmer and Sonoff L1 (+2k code)
|
||||
#undef USE_SONOFF_IFAN // Disable support for Sonoff iFan02 and iFan03 (+2k code)
|
||||
#undef USE_BUZZER // Disable support for a buzzer (+0k6 code)
|
||||
#undef USE_ARILUX_RF // Disable support for Arilux RF remote controller
|
||||
#undef USE_SHUTTER // Disable Shutter support for up to 4 shutter with different motortypes (+6k code)
|
||||
#undef USE_DEEPSLEEP // Disable support for deepsleep (+1k code)
|
||||
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
|
||||
#undef USE_HOTPLUG // Disable support for HotPlug
|
||||
#undef USE_DEVICE_GROUPS // Disable support for device groups (+3k5 code)
|
||||
#undef USE_PWM_DIMMER // Disable support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
|
||||
#undef USE_PWM_DIMMER_REMOTE // Disbale support for remote switches to PWM Dimmer
|
||||
#undef USE_KEELOQ // Disable support for Jarolift rollers by Keeloq algorithm (+4k5 code)
|
||||
#undef USE_SONOFF_D1 // Disable support for Sonoff D1 Dimmer (+0k7 code)
|
||||
#undef USE_DGR_LIGHT_SEQUENCE // Disable support for device group light sequencing (requires USE_DEVICE_GROUPS) (+0k2 code)
|
||||
|
||||
// -- Optional light modules ----------------------
|
||||
#undef USE_LIGHT // Enable Dimmer/Light support
|
||||
#undef USE_WS2812 // Disable WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
|
||||
#undef USE_MY92X1 // Disable support for MY92X1 RGBCW led controller as used in Sonoff B1, Ailight and Lohas
|
||||
#undef USE_SM16716 // Disable support for SM16716 RGB LED controller (+0k7 code)
|
||||
#undef USE_SM2135 // Disable support for SM2135 RGBCW led control as used in Action LSC (+0k6 code)
|
||||
#undef USE_SONOFF_L1 // Disable support for Sonoff L1 led control
|
||||
#undef USE_ELECTRIQ_MOODL // Disable support for ElectriQ iQ-wifiMOODL RGBW LED controller
|
||||
#undef USE_LIGHT_PALETTE // Disable support for color palette (+0k9 code)
|
||||
#undef USE_SHELLY_DIMMER // Disable support for Shelly Dimmer (+3k code)
|
||||
|
||||
#undef USE_COUNTER // Disable counters
|
||||
#undef USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
#undef USE_DS18x20 // Disable DS18x20 sensor
|
||||
#undef USE_I2C // Enable I2C, zbbridge uses i2c EEprom
|
||||
#undef USE_SPI // Disable all SPI devices
|
||||
#undef USE_DISPLAY // Disable Display support
|
||||
#undef USE_MHZ19 // Disable support for MH-Z19 CO2 sensor
|
||||
#undef USE_SENSEAIR // Disable support for SenseAir K30, K70 and S8 CO2 sensor
|
||||
#undef USE_PMS5003 // Disable support for PMS5003 and PMS7003 particle concentration sensor
|
||||
#undef USE_NOVA_SDS // Disable support for SDS011 and SDS021 particle concentration sensor
|
||||
#undef USE_HPMA // Disable support for Honeywell HPMA115S0 particle concentration sensor
|
||||
#undef USE_SERIAL_BRIDGE // Disable support for software Serial Bridge
|
||||
#undef USE_MP3_PLAYER // Disable DFPlayer Mini MP3 Player RB-DFR-562 commands: play, volume and stop
|
||||
#undef USE_AZ7798 // Disable support for AZ-Instrument 7798 CO2 datalogger
|
||||
#undef USE_PN532_HSU // Disable support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
|
||||
#undef USE_ZIGBEE // Disable serial communication with Zigbee CC2530 flashed with ZNP
|
||||
#undef USE_RDM6300 // Disable support for RDM6300 125kHz RFID Reader (+0k8)
|
||||
#undef USE_IBEACON // Disable support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
|
||||
#undef USE_GPS // Disable support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
|
||||
#undef USE_HM10 // (ESP8266 only) Disable support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
|
||||
#undef USE_MI_ESP32 // (ESP32 only) Disable support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
|
||||
#undef USE_HRXL // Disable support for MaxBotix HRXL-MaxSonar ultrasonic range finders (+0k7)
|
||||
#undef USE_TASMOTA_CLIENT // Disable support for Arduino Uno/Pro Mini via serial interface including flashing (+2k3 code, 44 mem)
|
||||
#undef USE_OPENTHERM // Disable support for OpenTherm (+15k code)
|
||||
|
||||
#undef USE_ENERGY_SENSOR // Disable energy sensors
|
||||
#undef USE_ADE7953 // Disable ADE7953 Energy monitor as used on Shelly 2.5 (I2C address 0x38) (+1k5)
|
||||
#undef USE_PZEM004T // Disable PZEM004T energy sensor
|
||||
#undef USE_PZEM_AC // Disable PZEM014,016 Energy monitor
|
||||
#undef USE_PZEM_DC // Disable PZEM003,017 Energy monitor
|
||||
#undef USE_MCP39F501 // Disable MCP39F501 Energy monitor as used in Shelly 2
|
||||
#undef USE_SDM120 // Disable support for Eastron SDM120-Modbus energy meter
|
||||
#undef USE_SDM630 // Disable support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDS2382 // Disable support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDSU666 // Disable support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_LE01MR // Disable support for F&F LE-01MR Modbus energy meter (+2k code)
|
||||
#undef USE_TELEINFO // Disable support for French Energy Provider metering telemetry
|
||||
|
||||
|
||||
#undef USE_DHT // Disable support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
||||
#undef USE_MAX31855 // Disable MAX31855 K-Type thermocouple sensor using softSPI
|
||||
#undef USE_MAX31865 // Disable support for MAX31865 RTD sensors using softSPI
|
||||
#undef USE_IR_REMOTE // Disable IR driver
|
||||
#undef USE_IR_RECEIVE
|
||||
|
||||
#undef USE_SR04 // Disable support for for HC-SR04 ultrasonic devices
|
||||
#undef USE_TM1638 // Disable support for TM1638 switches copying Switch1 .. Switch8
|
||||
#undef USE_HX711 // Disable support for HX711 load cell
|
||||
#undef USE_TX20_WIND_SENSOR // Disable support for La Crosse TX20 anemometer
|
||||
#undef USE_TX23_WIND_SENSOR // Disable support for La Crosse TX23 anemometer
|
||||
#undef USE_WINDMETER // Disable support for analog anemometer (+2k2 code)
|
||||
#undef USE_RC_SWITCH // Disable support for RF transceiver using library RcSwitch
|
||||
#undef USE_RF_SENSOR // Disable support for RF sensor receiver (434MHz or 868MHz) (+0k8 code)
|
||||
#undef USE_HRE // Disable support for Badger HR-E Water Meter (+1k4 code)
|
||||
#undef USE_A4988_STEPPER // Disable support for A4988_Stepper
|
||||
#undef USE_THERMOSTAT // Disable support for Thermostat
|
||||
#undef USE_DYP // Disable support for DYP ME-007 ultrasonic distance sensor, serial port version (+0k5 code)
|
||||
#undef DEBUG_THEO // Disable debug code
|
||||
#undef USE_DEBUG_DRIVER // Disable debug code
|
||||
#undef USE_ENHANCED_GUI_WIFI_SCAN
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Enable the standard modules common to all configurations
|
||||
\*********************************************************************************************/
|
||||
|
||||
// -- Standard options ------------------------
|
||||
#define USE_WEBSERVER // Webserver
|
||||
#define USE_WEBSEND_RESPONSE // command WebSend response message (+1k code)
|
||||
#define USE_EMULATION // Wemo or Hue emulation
|
||||
#define USE_EMULATION_HUE // Hue Bridge emulation for Alexa (+14k code, +2k mem common)
|
||||
#define USE_EMULATION_WEMO // Belkin WeMo emulation for Alexa (+6k code, +2k mem common)
|
||||
#define USE_TIMERS // support for up to 16 timers
|
||||
#define USE_TIMERS_WEB // support for timer webpage
|
||||
#define USE_SUNRISE // support for Sunrise and sunset tools
|
||||
#define USE_RULES // support for rules
|
||||
|
||||
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
|
||||
#define USE_LIGHT // Enable Dimmer/Light support
|
||||
|
||||
|
||||
// -- MQTT - TLS - AWS IoT ------------------------
|
||||
// Using TLS starting with version v6.5.0.16 compilation will only work using Core 2.4.2 and 2.5.2. No longer supported: 2.3.0
|
||||
// #define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
#define USE_MQTT_TLS_CA_CERT // Force full CA validation instead of fingerprints, slower, but simpler to use (+2.2k code, +1.9k mem during connection handshake)
|
||||
#define USE_MQTT_TLS_FORCE_EC_CIPHER // Force Elliptic Curve cipher (higher security) required by some servers (automatically enabled with USE_MQTT_AWS_IOT) (+11.4k code, +0.4k mem)
|
||||
#define USE_MQTT_AWS_IOT_LIGHT // Enable MQTT for AWS IoT in light mode, with user/password instead of private certificate
|
||||
// #define USE_MQTT_AWS_IOT // Enable MQTT for AWS IoT - requires a private key (+11.9k code, +0.4k mem)
|
||||
// Note: you need to generate a private key + certificate per device and update 'sonoff/sonoff_aws_iot.cpp'
|
||||
// Full documentation here: https://github.com/arendst/Sonoff-Tasmota/wiki/AWS-IoT
|
||||
|
||||
// -- Rules or Script ----------------------------
|
||||
// Select none or only one of the below defines
|
||||
// #undef USE_RULES // Add support for rules (+8k code)
|
||||
// #define USE_SCRIPT // Add support for script (+17k code)
|
||||
// #define USE_SCRIPT_COMPRESSION
|
||||
//#define USE_SCRIPT_FATFS 4 // Script: Add FAT FileSystem Support
|
||||
//#define USE_RF_SENSOR // Add support for RF sensor receiver (434MHz or 868MHz) (+0k8 code)
|
||||
|
||||
// #define USE_EXPRESSION // Add support for expression evaluation in rules (+3k2 code, +64 bytes mem)
|
||||
// #define SUPPORT_IF_STATEMENT // Add support for IF statement in rules (+4k2 code, -332 bytes mem)
|
||||
// #define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
|
||||
|
||||
// -- OLED Display ----------------------------
|
||||
// #define USE_I2C
|
||||
// #define USE_DISPLAY // Add I2C Display Support (+2k code)
|
||||
#define USE_DISPLAY_MODES1TO5 // Enable display mode 1 to 5 in addition to mode 0
|
||||
#undef USE_DISPLAY_LCD // [DisplayModel 1] Enable Lcd display (I2C addresses 0x27 and 0x3F) (+6k code)
|
||||
#define USE_DISPLAY_SSD1306 // [DisplayModel 2] Enable SSD1306 Oled 128x64 display (I2C addresses 0x3C and 0x3D) (+16k code)
|
||||
#undef USE_DISPLAY_MATRIX // [DisplayModel 3] Enable 8x8 Matrix display (I2C adresseses see below) (+11k code)
|
||||
//#define SHOW_SPLASH //Enable initialization splash message on the display
|
||||
//#define USE_AWATCH //Enables analog watch support
|
||||
// #define NUM_GRAPHS
|
||||
// #define USE_GRAPH //Enable line charts. Also requires NUM_GRAPHS
|
||||
|
||||
// -- PN 532 NFC ----------------------------
|
||||
//#define USE_PN532_HSU // Add support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
|
||||
#define USE_PN532_CAUSE_EVENTS // Cause event execution for PN532_UID= and PN532_DATA=[if defined] (+ 30 bytes code)
|
||||
#define USE_PN532_DATA_FUNCTION // Add sensor40 command support for erase, setting data block content (+1k7 code, 388 bytes mem)
|
||||
#define USE_PN532_DATA_RAW // Allow DATA block to be used by non-alpha-numberic data (+ 80 bytes code, 48 bytes ram)
|
||||
|
||||
// -- Misc ----------------------------
|
||||
//#define USE_DEBUG_DRIVER
|
||||
#undef PWM_MAX_SLEEP
|
||||
#define PWM_MAX_SLEEP 25 // for LED salon
|
||||
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Switch amongs options
|
||||
\*********************************************************************************************/
|
||||
#undef _HADINGER_DONE
|
||||
|
||||
////
|
||||
//
|
||||
// Selectors
|
||||
//
|
||||
////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#if !defined(_HADINGER_DEV) && !defined(_HADINGER_DENKY) && !defined(_HADINGER_M5STACK) && !defined(_HADINGER_IR_DEV) && !defined(_HADINGER_BULB) && !defined(_HADINGER_IR) && !defined(_HADINGER_ZNP) && !defined(_HADINGER_EZSP)
|
||||
// #define _HADINGER_DEV // development testing
|
||||
// #define _HADINGER_DENKY // Denky device
|
||||
#define _HADINGER_32_BERRY // Berry dev
|
||||
// #define _HADINGER_M5STACK // M5Stack device
|
||||
// #define _HADINGER_IR_DEV // development testing
|
||||
// #define _HADINGER_BULB // configuration for AWS IoT configured switches and bulbs, Hue emulation, should be 160 MHz
|
||||
// #define _HADINGER_IR // configuration for AWS IoT IR Blaster
|
||||
// #define _HADINGER_ZNP // configuration for CC2530 ZNP coordinator + AWS IoT + Ping
|
||||
// #define _HADINGER_EZSP // configuration for EZSP coordinator + AWS IoT + I2C + TCP Bridge
|
||||
#endif
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#ifdef _HADINGER_DEV
|
||||
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
// #define USE_IR_REMOTE
|
||||
|
||||
// #define USE_ENERGY_SENSOR
|
||||
// #define USE_HLW8012
|
||||
// #define USE_SONOFF_RF
|
||||
|
||||
#define USE_ENHANCED_GUI_WIFI_SCAN
|
||||
|
||||
#define USE_UFILESYS // use file system
|
||||
#define GUI_TRASH_FILE
|
||||
|
||||
// #define USE_BERRY
|
||||
#define USE_ETHERNET
|
||||
#define USE_TELEINFO
|
||||
|
||||
#define USE_WS2812
|
||||
#define USE_WS2812_DMA
|
||||
// #define USE_WS2812_INVERTED
|
||||
// #define USE_WS2812_HARDWARE NEO_HW_WS2812X // Hardware type (NEO_HW_WS2812, NEO_HW_WS2812X, NEO_HW_WS2813, NEO_HW_SK6812, NEO_HW_LC8812, NEO_HW_APA106, NEO_HW_P9813)
|
||||
// #define USE_WS2812_CTYPE NEO_GRB // Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)
|
||||
|
||||
|
||||
#define USE_I2C
|
||||
#define USE_BMP
|
||||
#define USE_MPU6886
|
||||
|
||||
// #undef USE_RULES // Disable support for rules
|
||||
// #define USE_SCRIPT // Add support for script (+17k code)
|
||||
// // #define USE_SCRIPT_FATFS 4 // Script: Add FAT FileSystem Support
|
||||
|
||||
// #define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
// #define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
// // #undef USE_MQTT_TLS_CA_CERT // Force full CA validation instead of fingerprints, slower, but simpler to use (+2.2k code, +1.9k mem during connection handshake)
|
||||
// // #undef USE_MQTT_TLS_FORCE_EC_CIPHER // Force Elliptic Curve cipher (higher security) required by some servers (automatically enabled with USE_MQTT_AWS_IOT) (+11.4k code, +0.4k mem)
|
||||
// // #undef USE_MQTT_AWS_IOT_LIGHT
|
||||
|
||||
// // #define USE_TELEGRAM
|
||||
// // #define USE_MQTT_TLS_CA_CERT
|
||||
// #define USE_RC_SWITCH
|
||||
// #define USE_THERMOSTAT
|
||||
// #define USE_DOMOTICZ
|
||||
// #define USE_HOME_ASSISTANT
|
||||
// #define USE_I2C
|
||||
// #define USE_DISPLAY
|
||||
#define USE_PING
|
||||
|
||||
// #define USE_EXPRESSION // Add support for expression evaluation in rules (+3k2 code, +64 bytes mem)
|
||||
// #define SUPPORT_IF_STATEMENT // Add support for IF statement in rules (+4k2 code, -332 bytes mem)
|
||||
// #define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_DEV"
|
||||
#endif //
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#ifdef _HADINGER_DENKY
|
||||
|
||||
#define USE_ENHANCED_GUI_WIFI_SCAN
|
||||
|
||||
#define USE_UFILESYS // use file system
|
||||
#define GUI_TRASH_FILE
|
||||
|
||||
#define USE_BERRY
|
||||
#define USE_I2C
|
||||
// #define USE_ETHERNET
|
||||
#define USE_TELEINFO
|
||||
#define USE_ENERGY_SENSOR
|
||||
#define USE_WS2812
|
||||
|
||||
#define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
// #undef USE_MQTT_TLS_CA_CERT // Force full CA validation instead of fingerprints, slower, but simpler to use (+2.2k code, +1.9k mem during connection handshake)
|
||||
// #undef USE_MQTT_TLS_FORCE_EC_CIPHER // Force Elliptic Curve cipher (higher security) required by some servers (automatically enabled with USE_MQTT_AWS_IOT) (+11.4k code, +0.4k mem)
|
||||
// #undef USE_MQTT_AWS_IOT_LIGHT
|
||||
|
||||
// #define USE_PING
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_DENKY"
|
||||
#endif //
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#ifdef _HADINGER_32_BERRY
|
||||
|
||||
#define USE_ENHANCED_GUI_WIFI_SCAN
|
||||
|
||||
#define USE_UFILESYS // use file system
|
||||
#define GUI_TRASH_FILE
|
||||
|
||||
#define USE_BERRY
|
||||
#define USE_I2C
|
||||
#define USE_DHT12
|
||||
#define USE_BMP
|
||||
#define USE_MPU6886
|
||||
// #define USE_SHT3X
|
||||
|
||||
// #define USE_ETHERNET
|
||||
// #define USE_TELEINFO
|
||||
#define USE_ENERGY_SENSOR
|
||||
#define USE_WS2812
|
||||
// #define USE_WS2812_DMA
|
||||
#define USE_WS2812_RMT 0
|
||||
// #define USE_WS2812_I2S 0
|
||||
// #define USE_WS2812_INVERTED
|
||||
|
||||
|
||||
#undef WS2812_LEDS
|
||||
#define WS2812_LEDS 25 // [Pixels] Number of WS2812 LEDs to start with (max is 512)
|
||||
|
||||
#define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
|
||||
// #define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
|
||||
|
||||
#define USE_LVGL
|
||||
|
||||
#define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
// #undef USE_MQTT_TLS_CA_CERT // Force full CA validation instead of fingerprints, slower, but simpler to use (+2.2k code, +1.9k mem during connection handshake)
|
||||
// #undef USE_MQTT_TLS_FORCE_EC_CIPHER // Force Elliptic Curve cipher (higher security) required by some servers (automatically enabled with USE_MQTT_AWS_IOT) (+11.4k code, +0.4k mem)
|
||||
// #undef USE_MQTT_AWS_IOT_LIGHT
|
||||
|
||||
// #define USE_PING
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_DENKY"
|
||||
#endif //
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#ifdef _HADINGER_M5STACK
|
||||
|
||||
#define USE_ENHANCED_GUI_WIFI_SCAN
|
||||
|
||||
#define USE_UFILESYS // use file system
|
||||
#define GUI_TRASH_FILE
|
||||
|
||||
#define USE_BERRY
|
||||
#define USE_ETHERNET
|
||||
//#define USE_TELEINFO
|
||||
|
||||
//#define USE_WS2812
|
||||
|
||||
// #define USE_I2S_AUDIO
|
||||
// #define USE_M5STACK_CORE2
|
||||
// #define USE_SCRIPT_FATFS 4
|
||||
// #define FAT_SCRIPT_SIZE 8192
|
||||
// #define USE_SCRIPT
|
||||
#define USE_I2C
|
||||
// #define USE_BMA423
|
||||
// #define SAY_TIME
|
||||
// #define USE_WEBRADIO
|
||||
// #define USE_I2S_WEBRADIO
|
||||
#define USE_DISPLAY
|
||||
#define USE_SPI
|
||||
|
||||
#define USE_MLX90614
|
||||
|
||||
// #define USE_DISPLAY_ILI9341
|
||||
#define USE_DISPLAY_ILI9342
|
||||
// #define USE_M5STACK_CORE_BASIC
|
||||
// #define USE_TOUCH_BUTTONS
|
||||
// #define JPEG_PICTS
|
||||
// #define USE_FT5206
|
||||
// #define USE_MPU6886
|
||||
|
||||
#define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
// #undef USE_MQTT_TLS_CA_CERT // Force full CA validation instead of fingerprints, slower, but simpler to use (+2.2k code, +1.9k mem during connection handshake)
|
||||
// #undef USE_MQTT_TLS_FORCE_EC_CIPHER // Force Elliptic Curve cipher (higher security) required by some servers (automatically enabled with USE_MQTT_AWS_IOT) (+11.4k code, +0.4k mem)
|
||||
// #undef USE_MQTT_AWS_IOT_LIGHT
|
||||
|
||||
// #define USE_PING
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_DENKY"
|
||||
#endif //
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#ifdef _HADINGER_IR_DEV
|
||||
|
||||
#define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code)
|
||||
// #define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_IR_DEV"
|
||||
#endif //
|
||||
|
||||
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#ifdef _HADINGER_BULB
|
||||
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
#define USE_IR_REMOTE
|
||||
#define USE_IR_RECEIVE
|
||||
|
||||
#define USE_ENERGY_SENSOR
|
||||
#define USE_HLW8012
|
||||
#define USE_SONOFF_RF
|
||||
|
||||
// #define USE_ENHANCED_GUI_WIFI_SCAN
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_BULB"
|
||||
#endif // _HADINGER_BULB
|
||||
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
#ifdef _HADINGER_IR
|
||||
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_IR"
|
||||
#endif // _HADINGER_IR
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
#ifdef _HADINGER_ZNP
|
||||
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
#define USE_ZIGBEE // Enable serial communication with Zigbee CC2530 flashed with ZNP
|
||||
#define USE_PING
|
||||
#undef USE_LIGHT
|
||||
|
||||
// #undef USE_RULES
|
||||
// #define USE_SCRIPT
|
||||
|
||||
#undef USE_LIGHT
|
||||
#define USE_UFILESYS // use file system
|
||||
#define GUI_TRASH_FILE
|
||||
|
||||
#undef USE_EMULATION_WEMO // optimize and remove Wemo
|
||||
#undef USE_LIGHT_VIRTUAL_CT // Disable support for Virtual White Color Temperature (SO106)
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_ZNP"
|
||||
#endif // _HADINGER_ZNP
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
#ifdef _HADINGER_EZSP
|
||||
|
||||
#define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
#define USE_ZIGBEE // Enable serial communication with Zigbee CC2530 flashed with ZNP
|
||||
#undef USE_ZIGBEE_ZNP // Enable ZNP protocol, needed for CC2530 based devices
|
||||
#define USE_ZIGBEE_EZSP // Enable EZSP protocol, needed for EFR32 EmberZNet based devices, like Sonoff Zigbee bridge
|
||||
#define USE_TCP_BRIDGE
|
||||
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
||||
|
||||
#undef USE_LIGHT
|
||||
#define USE_UFILESYS // use file system
|
||||
#define GUI_TRASH_FILE
|
||||
|
||||
#undef USE_EMULATION_WEMO // optimize and remove Wemo
|
||||
#undef USE_LIGHT_VIRTUAL_CT // Disable support for Virtual White Color Temperature (SO106)
|
||||
|
||||
#define _HADINGER_DONE "_HADINGER_EZSP"
|
||||
#endif // _HADINGER_EZSP
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
|
||||
// Fallback for dev Version
|
||||
#ifndef _HADINGER_DONE
|
||||
|
||||
#undef USE_ZIGBEE_ZNP // Enable ZNP protocol, needed for CC2530 based devices
|
||||
#define USE_ZIGBEE_EZSP // Enable EZSP protocol, needed for EFR32 EmberZNet based devices, like Sonoff Zigbee bridge
|
||||
#define USE_TCP_BRIDGE
|
||||
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
||||
|
||||
#define _HADINGER_DONE "dev"
|
||||
#endif
|
||||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
// #define USE_DEVICE_GROUPS // Add support for device groups (+5k5 code)
|
||||
// #define USE_I2C
|
||||
// #define USE_PN532_HSU // Add support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
|
||||
// #define USE_MQTT_TLS // Use TLS for MQTT connection (+34.5k code, +7.0k mem and +4.8k additional during connection handshake)
|
||||
// #define USE_ZIGBEE // Enable serial communication with Zigbee CC2530 flashed with ZNP
|
||||
// #define USE_PING
|
||||
// #undef USE_RULES_COMPRESSION
|
||||
|
||||
// #define USE_FFT
|
||||
|
||||
#endif // _USER_CONFIG_OVERRIDE_H_
|
||||
Loading…
Reference in New Issue