mirror of https://github.com/arendst/Tasmota.git
v5.11.1j - Change uptime to seconds
5.11.1j * Prep for release * Change uptime from hour to second resulting in a display of 123T13:45:21 where 123 is days * Fix Arilux RF induced exception by moving interrupt handler to iram on non esp/arduino lib v2.3.0 * Add NTP sync based on chip id (#1773)
This commit is contained in:
arendst
parent
150de9c99d
commit
cb51b892f9
|
|
@ -1,7 +1,7 @@
|
|||
## Sonoff-Tasmota
|
||||
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
|
||||
|
||||
Current version is **5.11.1i** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
Current version is **5.11.1j** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
|
||||
### ATTENTION All versions
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,10 @@
|
|||
/* 5.11.1i
|
||||
/* 5.11.1j
|
||||
* Prep for release
|
||||
* Change uptime from hour to second resulting in a display of 123T13:45:21 where 123 is days
|
||||
* Fix Arilux RF induced exception by moving interrupt handler to iram on non esp/arduino lib v2.3.0
|
||||
* Add NTP sync based on chip id (#1773)
|
||||
*
|
||||
* 5.11.1i
|
||||
* Update TasmotaSerial library to 1.1.0
|
||||
* Rename commands HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal and CurrentCal to be used for both Pow and S31 calibration
|
||||
* Rename commands HlwPSet, HlwUSet and HlwISet to PowerSet, VoltageSet and CurrentSet to be used for both Pow and S31 calibration
|
||||
|
|
|
|||
|
|
@ -270,6 +270,7 @@ struct TIME_T {
|
|||
char name_of_month[4];
|
||||
uint16_t day_of_year;
|
||||
uint16_t year;
|
||||
unsigned long days;
|
||||
unsigned long valid;
|
||||
} RtcTime;
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@
|
|||
- Select IDE Tools - Flash Size: "1M (no SPIFFS)"
|
||||
====================================================*/
|
||||
|
||||
#define VERSION 0x050B0109 // 5.11.1i
|
||||
#define VERSION 0x050B010A // 5.11.1j
|
||||
|
||||
// Location specific includes
|
||||
#include <core_version.h> // Arduino_Esp8266 version information (ARDUINO_ESP8266_RELEASE and ARDUINO_ESP8266_RELEASE_2_3_0)
|
||||
|
|
@ -126,7 +126,8 @@ byte ota_retry_counter = OTA_ATTEMPTS; // OTA retry counter
|
|||
char *ota_url; // OTA url string
|
||||
int restart_flag = 0; // Sonoff restart flag
|
||||
int wifi_state_flag = WIFI_RESTART; // Wifi state flag
|
||||
int uptime = 0; // Current uptime in hours
|
||||
//int uptime = 0; // Current uptime in hours
|
||||
uint32_t uptime = 0; // Counting every second until 4294967295 = 130 year
|
||||
boolean latest_uptime_flag = true; // Signal latest uptime
|
||||
int tele_period = 0; // Tele period timer
|
||||
byte web_log_index = 1; // Index in Web log buffer (should never be 0)
|
||||
|
|
@ -1714,8 +1715,8 @@ void PublishStatus(uint8_t payload)
|
|||
}
|
||||
|
||||
if ((0 == payload) || (1 == payload)) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS1_PARAMETER "\":{\"" D_JSON_BAUDRATE "\":%d,\"" D_CMND_GROUPTOPIC "\":\"%s\",\"" D_CMND_OTAURL "\":\"%s\",\"" D_JSON_UPTIME "\":%d,\"" D_CMND_SLEEP "\":%d,\"" D_JSON_BOOTCOUNT "\":%d,\"" D_JSON_SAVECOUNT "\":%d,\"" D_JSON_SAVEADDRESS "\":\"%X\"}}"),
|
||||
baudrate, Settings.mqtt_grptopic, Settings.ota_url, uptime, Settings.sleep, Settings.bootcount, Settings.save_flag, GetSettingsAddress());
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS1_PARAMETER "\":{\"" D_JSON_BAUDRATE "\":%d,\"" D_CMND_GROUPTOPIC "\":\"%s\",\"" D_CMND_OTAURL "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\",\"" D_CMND_SLEEP "\":%d,\"" D_JSON_BOOTCOUNT "\":%d,\"" D_JSON_SAVECOUNT "\":%d,\"" D_JSON_SAVEADDRESS "\":\"%X\"}}"),
|
||||
baudrate, Settings.mqtt_grptopic, Settings.ota_url, GetUptime().c_str(), Settings.sleep, Settings.bootcount, Settings.save_flag, GetSettingsAddress());
|
||||
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "1"));
|
||||
}
|
||||
|
||||
|
|
@ -1788,7 +1789,7 @@ void MqttShowState()
|
|||
{
|
||||
char stemp1[33];
|
||||
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s{\"" D_JSON_TIME "\":\"%s\",\"" D_JSON_UPTIME "\":%d"), mqtt_data, GetDateAndTime().c_str(), uptime);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s{\"" D_JSON_TIME "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\""), mqtt_data, GetDateAndTime().c_str(), GetUptime().c_str());
|
||||
#ifdef USE_ADC_VCC
|
||||
dtostrfd((double)ESP.getVcc()/1000, 3, stemp1);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_JSON_VCC "\":%s"), mqtt_data, stemp1);
|
||||
|
|
@ -1833,6 +1834,8 @@ boolean MqttShowSensor()
|
|||
|
||||
void PerformEverySecond()
|
||||
{
|
||||
uptime++;
|
||||
|
||||
if (blockgpio0) {
|
||||
blockgpio0--;
|
||||
}
|
||||
|
|
@ -1897,8 +1900,7 @@ void PerformEverySecond()
|
|||
|
||||
if ((2 == RtcTime.minute) && latest_uptime_flag) {
|
||||
latest_uptime_flag = false;
|
||||
uptime++;
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\",\"" D_JSON_UPTIME "\":%d}"), GetDateAndTime().c_str(), uptime);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\"}"), GetDateAndTime().c_str(), GetUptime().c_str());
|
||||
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_UPTIME));
|
||||
}
|
||||
if ((3 == RtcTime.minute) && !latest_uptime_flag) {
|
||||
|
|
|
|||
|
|
@ -82,9 +82,21 @@ void WifiWpsStatusCallback(wps_cb_status status);
|
|||
#ifdef USE_DHT
|
||||
#undef USE_DHT // Disable internal DHT sensor
|
||||
#endif
|
||||
#ifdef USE_DISPLAY
|
||||
#undef USE_DISPLAY // Disable Display support
|
||||
#endif
|
||||
#ifdef USE_MHZ19
|
||||
#undef USE_MHZ19 // Disable support for MH-Z19 CO2 sensor
|
||||
#endif
|
||||
#ifdef USE_SENSEAIR
|
||||
#undef USE_SENSEAIR // Disable support for SenseAir K30, K70 and S8 CO2 sensor
|
||||
#endif
|
||||
#ifdef USE_IR_REMOTE
|
||||
#undef USE_IR_REMOTE // Disable IR driver
|
||||
#endif
|
||||
#ifdef USE_ARILUX_RF
|
||||
#undef USE_ARILUX_RF // Disable support for Arilux RF remote controller
|
||||
#endif
|
||||
#ifdef DEBUG_THEO
|
||||
#undef DEBUG_THEO // Disable debug code
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -993,6 +993,7 @@ uint32_t standard_time = 0;
|
|||
uint32_t ntp_time = 0;
|
||||
uint32_t midnight = 1451602800;
|
||||
uint8_t midnight_now = 0;
|
||||
uint8_t ntp_sync_minute = 0;
|
||||
|
||||
String GetBuildDateAndTime()
|
||||
{
|
||||
|
|
@ -1047,6 +1048,22 @@ String GetUtcDateAndTime()
|
|||
return String(dt);
|
||||
}
|
||||
|
||||
String GetUptime()
|
||||
{
|
||||
char dt[16];
|
||||
|
||||
TIME_T ut;
|
||||
BreakTime(uptime, ut);
|
||||
|
||||
// "P128DT14H35M44S" - ISO8601:2004 - https://en.wikipedia.org/wiki/ISO_8601 Durations
|
||||
// snprintf_P(dt, sizeof(dt), PSTR("P%dDT%02dH%02dM%02dS"), ut.days, ut.hour, ut.minute, ut.second);
|
||||
|
||||
// "128 14:35:44" - OpenVMS
|
||||
// "128T14:35:44" - Tasmota
|
||||
snprintf_P(dt, sizeof(dt), PSTR("%d" D_DATE_TIME_SEPARATOR "%02d" D_HOUR_MINUTE_SEPARATOR "%02d" D_MINUTE_SECOND_SEPARATOR "%02d"), ut.days, ut.hour, ut.minute, ut.second);
|
||||
return String(dt);
|
||||
}
|
||||
|
||||
void BreakTime(uint32_t time_input, TIME_T &tm)
|
||||
{
|
||||
// break the given time_input into time components
|
||||
|
|
@ -1066,6 +1083,7 @@ void BreakTime(uint32_t time_input, TIME_T &tm)
|
|||
time /= 60; // now it is hours
|
||||
tm.hour = time % 24;
|
||||
time /= 24; // now it is days
|
||||
tm.days = time;
|
||||
tm.day_of_week = ((time + 4) % 7) + 1; // Sunday is day 1
|
||||
|
||||
year = 0;
|
||||
|
|
@ -1201,22 +1219,13 @@ boolean MidnightNow()
|
|||
|
||||
void RtcSecond()
|
||||
{
|
||||
byte ntpsync;
|
||||
uint32_t stdoffset;
|
||||
uint32_t dstoffset;
|
||||
TIME_T tmpTime;
|
||||
|
||||
ntpsync = 0;
|
||||
if (RtcTime.year < 2016) {
|
||||
if (WL_CONNECTED == WiFi.status()) {
|
||||
ntpsync = 1; // Initial NTP sync
|
||||
}
|
||||
} else {
|
||||
if ((1 == RtcTime.minute) && (1 == RtcTime.second)) {
|
||||
ntpsync = 1; // Hourly NTP sync at xx:01:01
|
||||
}
|
||||
}
|
||||
if (ntpsync) {
|
||||
if ((ntp_sync_minute > 59) && (3 == RtcTime.minute)) ntp_sync_minute = 1; // If sync prepare for a new cycle
|
||||
uint8_t offset = (uptime < 30) ? RtcTime.second : (((ESP.getChipId() & 0xF) * 3) + 3) ; // First try ASAP to sync. If fails try once every 60 seconds based on chip id
|
||||
if ((WL_CONNECTED == WiFi.status()) && (offset == RtcTime.second) && ((RtcTime.year < 2016) || (ntp_sync_minute == RtcTime.minute))) {
|
||||
ntp_time = sntp_get_current_timestamp();
|
||||
if (ntp_time) {
|
||||
utc_time = ntp_time;
|
||||
|
|
@ -1230,6 +1239,9 @@ void RtcSecond()
|
|||
AddLog(LOG_LEVEL_DEBUG);
|
||||
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION "(" D_STD_TIME ") %s"), GetTime(3).c_str());
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
ntp_sync_minute = 60; // Sync so block further requests
|
||||
} else {
|
||||
ntp_sync_minute++; // Try again in next minute
|
||||
}
|
||||
}
|
||||
utc_time++;
|
||||
|
|
|
|||
|
|
@ -169,11 +169,10 @@
|
|||
#define PRESSURE_RESOLUTION 1 // [PressRes] Maximum number of decimals (0 - 3) showing sensor Pressure
|
||||
#define ENERGY_RESOLUTION 3 // [EnergyRes] Maximum number of decimals (0 - 5) showing energy usage in kWh
|
||||
|
||||
// -- Sensor code selection -----------------------
|
||||
// -- Internal Analog input -----------------------
|
||||
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
|
||||
#define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
||||
|
||||
// -- One wire sensors ----------------------------
|
||||
// WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors
|
||||
//#define USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
||||
//#define USE_DS18x20_LEGACY // Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)
|
||||
|
|
@ -185,39 +184,24 @@
|
|||
#define USE_SHT3X // Add I2C code for SHT3x sensor (+0k6 code)
|
||||
#define USE_HTU // Add I2C code for HTU21/SI7013/SI7020/SI7021 sensor (+1k5 code)
|
||||
#define USE_BMP // Add I2C code for BMP085/BMP180/BMP280/BME280 sensor (+4k code)
|
||||
#define USE_BME680 // Add additional support for BME680 sensor using Adafruit Sensor and BME680 libraries (+6k code)
|
||||
// #define USE_BME680 // Add additional support for BME680 sensor using Adafruit Sensor and BME680 libraries (+6k code)
|
||||
#define USE_BH1750 // Add I2C code for BH1750 sensor (+0k5 code)
|
||||
// #define USE_VEML6070 // Add I2C code for VEML6070 sensor (+0k5 code)
|
||||
// #define USE_TSL2561 // Add I2C code for TSL2561 sensor using library Adafruit TSL2561 Arduino (+1k2 code)
|
||||
// #define USE_ADS1115 // Add I2C code for ADS1115 16 bit A/D converter based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
|
||||
// #define USE_ADS1115_I2CDEV // Add I2C code for ADS1115 16 bit A/D converter using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)
|
||||
// #define USE_INA219 // Add I2C code for INA219 Low voltage and current sensor (+1k code)
|
||||
// #define USE_DISPLAY // Add I2C Display Support for LCD, Oled and up to eigth Matrices (+19k code)
|
||||
#define MTX_ADDRESS1 0x71 // [DisplayAddress[1]] I2C address of first 8x8 matrix module
|
||||
#define MTX_ADDRESS2 0x74 // [DisplayAddress[2]] I2C address of second 8x8 matrix module
|
||||
#define MTX_ADDRESS3 0x75 // [DisplayAddress[3]] I2C address of third 8x8 matrix module
|
||||
#define MTX_ADDRESS4 0x72 // [DisplayAddress[4]] I2C address of fourth 8x8 matrix module
|
||||
#define MTX_ADDRESS5 0x73 // [DisplayAddress[5]] I2C address of fifth 8x8 matrix module
|
||||
#define MTX_ADDRESS6 0x76 // [DisplayAddress[6]] I2C address of sixth 8x8 matrix module
|
||||
#define MTX_ADDRESS7 0x00 // [DisplayAddress[7]] I2C address of seventh 8x8 matrix module
|
||||
#define MTX_ADDRESS8 0x00 // [DisplayAddress[8]] I2C address of eigth 8x8 matrix module
|
||||
#endif // USE_I2C
|
||||
|
||||
//#define USE_SPI // SPI using library TasmotaTFT
|
||||
#ifdef USE_SPI
|
||||
#ifndef USE_DISPLAY
|
||||
#define USE_DISPLAY // Add SPI Display support for 320x240 and 480x320 TFT
|
||||
#endif
|
||||
#endif // USE_SPI
|
||||
|
||||
// -- Carbon dioxide (CO2) sensors ----------------
|
||||
// -- Serial sensors ------------------------------
|
||||
#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
||||
#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
||||
#define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
||||
#define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
||||
|
||||
#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
|
||||
#define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
||||
|
||||
// -- Low level interface devices -----------------
|
||||
#define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
|
||||
// #define USE_IR_HVAC // Support for HVAC system using IR (+2k code)
|
||||
#define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
|
||||
|
|
@ -226,7 +210,7 @@
|
|||
#define USE_WS2812_CTYPE 1 // WS2812 Color type (0 - RGB, 1 - GRB, 2 - RGBW, 3 - GRBW)
|
||||
// #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow
|
||||
|
||||
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code)
|
||||
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Compile a minimal version if upgrade memory gets tight ONLY TO BE USED FOR UPGRADE STEP 1!
|
||||
|
|
|
|||
|
|
@ -1328,6 +1328,9 @@ void HandleUploadLoop()
|
|||
#ifdef USE_EMULATION
|
||||
UdpDisconnect();
|
||||
#endif // USE_EMULATION
|
||||
#ifdef USE_ARILUX_RF
|
||||
AriluxRfDisable(); // Prevent restart exception on Arilux Interrupt routine
|
||||
#endif // USE_ARILUX_RF
|
||||
if (Settings.flag.mqtt_enabled) {
|
||||
MqttClient.disconnect();
|
||||
}
|
||||
|
|
@ -1593,7 +1596,8 @@ void HandleInformation()
|
|||
func += F(D_PROGRAM_VERSION "}2"); func += my_version;
|
||||
func += F("}1" D_BUILD_DATE_AND_TIME "}2"); func += GetBuildDateAndTime();
|
||||
func += F("}1" D_CORE_AND_SDK_VERSION "}2" ARDUINO_ESP8266_RELEASE "/"); func += String(ESP.getSdkVersion());
|
||||
func += F("}1" D_UPTIME "}2"); func += String(uptime); func += F(" Hours");
|
||||
// func += F("}1" D_UPTIME "}2"); func += String(uptime); func += F(" Seconds");
|
||||
func += F("}1" D_UPTIME "}2"); func += GetUptime();
|
||||
snprintf_P(stopic, sizeof(stopic), PSTR(" at %X"), GetSettingsAddress());
|
||||
func += F("}1" D_FLASH_WRITE_COUNT "}2"); func += String(Settings.save_flag); func += stopic;
|
||||
func += F("}1" D_BOOT_COUNT "}2"); func += String(Settings.bootcount);
|
||||
|
|
|
|||
|
|
@ -108,7 +108,7 @@ uint16_t light_wakeup_counter = 0;
|
|||
|
||||
uint8_t light_fixed_color_index = 1;
|
||||
|
||||
unsigned long strip_timer_counter = 0; // Bars and Gradient
|
||||
unsigned long strip_timer_counter = 0; // Bars and Gradient
|
||||
|
||||
#ifdef USE_ARILUX_RF
|
||||
/*********************************************************************************************\
|
||||
|
|
@ -133,9 +133,12 @@ unsigned int arilux_rf_repeat_count = 0;
|
|||
|
||||
uint8_t arilux_rf_toggle = 0;
|
||||
|
||||
|
||||
#ifndef ARDUINO_ESP8266_RELEASE_2_3_0
|
||||
#ifndef USE_WS2812_DMA // Collides with Neopixelbus but solves RF misses
|
||||
//void AriluxRfInterrupt() ICACHE_RAM_ATTR; // As iram is tight and it works this way too
|
||||
void AriluxRfInterrupt() ICACHE_RAM_ATTR; // As iram is tight and it works this way too
|
||||
#endif // USE_WS2812_DMA
|
||||
#endif // ARDUINO_ESP8266_RELEASE_2_3_0
|
||||
|
||||
void AriluxRfInterrupt()
|
||||
{
|
||||
|
|
@ -366,13 +369,9 @@ void LightInit()
|
|||
}
|
||||
}
|
||||
if (pin[GPIO_ARIRFRCV] < 99) {
|
||||
#ifdef USE_ARILUX_RF
|
||||
AriluxRfInit();
|
||||
#else
|
||||
if (pin[GPIO_LED2] < 99) {
|
||||
digitalWrite(pin[GPIO_LED2], bitRead(led_inverted, 1)); // Turn off RF
|
||||
}
|
||||
#endif // USE_ARILUX_RF
|
||||
}
|
||||
}
|
||||
#ifdef USE_WS2812 // ************************************************************************
|
||||
|
|
@ -1225,11 +1224,14 @@ boolean Xdrv01(byte function)
|
|||
case FUNC_EVERY_50_MSECOND:
|
||||
LightAnimate();
|
||||
#ifdef USE_ARILUX_RF
|
||||
if (pin[GPIO_ARIRFRCV] < 99) {
|
||||
AriluxRfHandler();
|
||||
}
|
||||
if (pin[GPIO_ARIRFRCV] < 99) AriluxRfHandler();
|
||||
#endif // USE_ARILUX_RF
|
||||
break;
|
||||
#ifdef USE_ARILUX_RF
|
||||
case FUNC_EVERY_SECOND:
|
||||
if (10 == uptime) AriluxRfInit(); // Needs rest before enabling RF interrupts
|
||||
break;
|
||||
#endif // USE_ARILUX_RF
|
||||
case FUNC_COMMAND:
|
||||
result = LightCommand();
|
||||
break;
|
||||
|
|
|
|||
Loading…
Reference in New Issue