mirror of https://github.com/arendst/Tasmota.git
Merge pull request #15015 from curzon01/dev-neopool
Update NeoPool controller
This commit is contained in:
Theo Arends
GitHub
commit
d3f330e18c
|
|
@ -7,11 +7,14 @@ All notable changes to this project will be documented in this file.
|
|||
### Added
|
||||
- TasmotaSerial implement ``end()``
|
||||
- ESP32 TasmotaSerial uart mapping to support multiple ``begin()`` and implement ``getUart()`` (#14981)
|
||||
- Neopool commands ``NPpHMin``, ``NPpHMax``, ``NPpH``, ``NPRedox``, ``NPHydrolysis``, ``NPIonization``, ``NPChlorine`` and ``NPControl``
|
||||
- NeoPool system voltages display
|
||||
|
||||
### Changed
|
||||
- Extent number of pulsetimers from 8 to 32 (#8266)
|
||||
- Tasmota ESP32 Arduino core to v2.0.2.3 (#14979)
|
||||
- TasmotaSerial library from v3.4.0 to v3.5.0 (#14981)
|
||||
- NeoPool limit relay output to the number actually available
|
||||
|
||||
### Fixed
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
xsns_83_neopool.ino - Sugar Valley NeoPool Control System Modbus support for Tasmota
|
||||
|
||||
Copyright (C) 2021 Norbert Richter
|
||||
Copyright (C) 2022 Norbert Richter
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -31,12 +31,12 @@
|
|||
* Bayrol
|
||||
* Hay
|
||||
*
|
||||
* Sugar Valley RS485 connector inside (Display/Wifi/External)
|
||||
* Sugar Valley RS485 connector inside (DISPLAY/WIFI/EXTERN)
|
||||
* pins (from top to bottom):
|
||||
*
|
||||
* RS485 MODBUS
|
||||
* ___
|
||||
* 1 |* |- +12V
|
||||
* 1 |* |- +12V (internal power supply)
|
||||
* 2 |* |-
|
||||
* 3 |* |- Modbus A+
|
||||
* 4 |* |- Modbus B-
|
||||
|
|
@ -44,6 +44,9 @@
|
|||
*
|
||||
* RS485 Parameter: 19200 Baud / 1 Stopbit / Parity None
|
||||
*
|
||||
* Channel connector DISPLAY is useless as long as the internal display is also connect,
|
||||
* use WIFI or EXTERN instead.
|
||||
*
|
||||
* Hardware serial will be selected if GPIO1 = [NeoPool Rx] and GPIO3 = [NeoPool Tx]
|
||||
\*********************************************************************************************/
|
||||
|
||||
|
|
@ -54,7 +57,7 @@
|
|||
#endif
|
||||
|
||||
#ifndef NEOPOOL_MODBUS_ADDRESS
|
||||
#define NEOPOOL_MODBUS_ADDRESS 1 // Modbus address
|
||||
#define NEOPOOL_MODBUS_ADDRESS 1 // Modbus address, "WIFI" uses 1, "EXTERN" defaults also 1
|
||||
#endif
|
||||
|
||||
|
||||
|
|
@ -552,6 +555,8 @@ enum NeoPoolConstAndBitMask {
|
|||
#include <TasmotaModbus.h>
|
||||
TasmotaModbus *NeoPoolModbus;
|
||||
|
||||
#define NEOPOOL_RELAY_MAX 7 // Number of relais build-in
|
||||
|
||||
enum NeoPoolResult {
|
||||
NEOPOOL_RESULT_DEC = false,
|
||||
NEOPOOL_RESULT_HEX,
|
||||
|
|
@ -579,35 +584,20 @@ uint8_t neopoll_cmd_delay = 0;
|
|||
void (* neopoll_cmd)(void) = nullptr;
|
||||
|
||||
// Modbus register set to read
|
||||
// Can be either a block of register read once with a single read or a list of disjoined addr which has to read reg by reg
|
||||
// This keeps the update cycle fast even we have a lot of register to read
|
||||
#define NEOPOOL_REG_TYPE_BLOCK 0
|
||||
#define NEOPOOL_REG_TYPE_LIST 1
|
||||
typedef struct {
|
||||
const uint16_t addr;
|
||||
const uint16_t cnt;
|
||||
uint16_t *data;
|
||||
} NeoPoolRegBlock;
|
||||
|
||||
typedef struct {
|
||||
const uint16_t addr;
|
||||
uint16_t data;
|
||||
} NeoPoolRegList;
|
||||
|
||||
// Defines blocks of register read once with a single read
|
||||
struct {
|
||||
const uint16_t type;
|
||||
union {
|
||||
NeoPoolRegBlock block;
|
||||
NeoPoolRegList *list;
|
||||
};
|
||||
const uint16_t addr;
|
||||
const uint16_t cnt;
|
||||
uint16_t *data;
|
||||
} NeoPoolReg[] = {
|
||||
// 6 entries so using 250ms poll interval we are through in 1,5 for all register
|
||||
{NEOPOOL_REG_TYPE_BLOCK, {MBF_ION_CURRENT, MBF_NOTIFICATION - MBF_ION_CURRENT + 1, nullptr}},
|
||||
{NEOPOOL_REG_TYPE_BLOCK, {MBF_CELL_RUNTIME_LOW, MBF_CELL_RUNTIME_HIGH - MBF_CELL_RUNTIME_LOW + 1, nullptr}},
|
||||
{NEOPOOL_REG_TYPE_BLOCK, {MBF_PAR_VERSION, MBF_PAR_MODEL - MBF_PAR_VERSION + 1, nullptr}},
|
||||
{NEOPOOL_REG_TYPE_BLOCK, {MBF_PAR_TIME_LOW, MBF_PAR_FILT_GPIO - MBF_PAR_TIME_LOW + 1, nullptr}},
|
||||
{NEOPOOL_REG_TYPE_BLOCK, {MBF_PAR_ION, MBF_PAR_FILTRATION_CONF - MBF_PAR_ION + 1, nullptr}},
|
||||
{NEOPOOL_REG_TYPE_BLOCK, {MBF_PAR_UICFG_MACHINE, MBF_PAR_UICFG_MACH_VISUAL_STYLE - MBF_PAR_UICFG_MACHINE + 1, nullptr}}
|
||||
// 7 entries each polled every 250ms needs 1750 ms for complete register set
|
||||
{MBF_ION_CURRENT, MBF_NOTIFICATION - MBF_ION_CURRENT + 1, nullptr},
|
||||
{MBF_CELL_RUNTIME_LOW, MBF_CELL_RUNTIME_HIGH - MBF_CELL_RUNTIME_LOW + 1, nullptr},
|
||||
{MBF_PAR_VERSION, MBF_PAR_MODEL - MBF_PAR_VERSION + 1, nullptr},
|
||||
{MBF_PAR_TIME_LOW, MBF_PAR_FILT_GPIO - MBF_PAR_TIME_LOW + 1, nullptr},
|
||||
{MBF_PAR_ION, MBF_PAR_FILTRATION_CONF - MBF_PAR_ION + 1, nullptr},
|
||||
{MBF_PAR_UICFG_MACHINE, MBF_PAR_UICFG_MACH_VISUAL_STYLE - MBF_PAR_UICFG_MACHINE + 1, nullptr},
|
||||
{MBF_VOLT_24_36, MBF_VOLT_12 - MBF_VOLT_24_36 + 1, nullptr}
|
||||
};
|
||||
|
||||
// NeoPool modbus function errors
|
||||
|
|
@ -693,6 +683,7 @@ const char kNeoPoolpHAlarms[] PROGMEM =
|
|||
#define D_NEOPOOL_UNIT_GPERH "g/h"
|
||||
|
||||
const char HTTP_SNS_NEOPOOL_TIME[] PROGMEM = "{s}%s " D_NEOPOOL_TIME "{m}%s" "{e}";
|
||||
const char HTTP_SNS_NEOPOOL_VOLTAGE[] PROGMEM = "{s}%s " D_VOLTAGE "{m}%*_f / %*_f " D_UNIT_VOLT "{e}";
|
||||
const char HTTP_SNS_NEOPOOL_HYDROLYSIS[] PROGMEM = "{s}%s " D_NEOPOOL_HYDROLYSIS "{m}" NEOPOOL_FMT_HIDRO " %s ";
|
||||
const char HTTP_SNS_NEOPOOL_PH[] PROGMEM = "{s}%s " D_PH "{m}" NEOPOOL_FMT_PH;
|
||||
const char HTTP_SNS_NEOPOOL_REDOX[] PROGMEM = "{s}%s " D_NEOPOOL_REDOX "{m}" NEOPOOL_FMT_RX " " D_UNIT_MILLIVOLT;
|
||||
|
|
@ -740,6 +731,44 @@ const char HTTP_SNS_NEOPOOL_STATUS_ACTIVE[] PROGMEM = "filter:invert(1)";
|
|||
* prg change by switch light of for delay time then switch on
|
||||
* delay in ms from 0.5 - 10 sec
|
||||
*
|
||||
* NPpHMin {<ph>}
|
||||
* (only available if pH module is installed)
|
||||
* get/set pH lower limit (ph = 0..14)
|
||||
* get current limit if <ph> is omitted, otherwise set
|
||||
*
|
||||
* NPpHMax {<ph>}
|
||||
* (only available if pH module is installed)
|
||||
* get/set pH upper limit (ph = 0..14)
|
||||
* get current limit if <ph> is omitted, otherwise set
|
||||
*
|
||||
* NPpH {<ph>}
|
||||
* (only available if pH module is installed)
|
||||
* get/set pH upper limit (ph = 0..14)
|
||||
* same as NPpHMax
|
||||
*
|
||||
* NPRedox {<setpoint>}
|
||||
* (only available if redox module is installed)
|
||||
* get/set redox set point in mV (setpoint = 0..100, the upper limit of the range may vary depending on the MBF_PAR_HIDRO_NOM register)
|
||||
* get current set point if <setpoint> is omitted, otherwise set
|
||||
*
|
||||
* NPHydrolysis {<level>}
|
||||
* (only available if hydrolysis/electrolysis control is present)
|
||||
* get/set hydrolysis/electrolysis level in % (level = 0..100)
|
||||
* get current level if <level> is omitted, otherwise set
|
||||
*
|
||||
* NPIonization {<level>}
|
||||
* (only available if ionization control is present)
|
||||
* get/set ionization target production level (level = 0..x, the upper limit of the range may vary depending on the MBF_PAR_ION_NOM register)
|
||||
* get current level if <level> is omitted, otherwise set
|
||||
*
|
||||
* NPChlorine {<setpoint>}
|
||||
* (only available if free chlorine probe detector is installed)
|
||||
* get/set chlorine set point in ppm (setpoint = 0..10)
|
||||
* get current set point if <setpoint> is omitted, otherwise set
|
||||
*
|
||||
* NPControl
|
||||
* Show information about system controls
|
||||
*
|
||||
* NPSave
|
||||
* write data permanently into EEPROM
|
||||
*
|
||||
|
|
@ -854,6 +883,14 @@ const char HTTP_SNS_NEOPOOL_STATUS_ACTIVE[] PROGMEM = "filter:invert(1)";
|
|||
#define D_CMND_NP_FILTRATIONMODE "Filtrationmode"
|
||||
#define D_CMND_NP_TIME "Time"
|
||||
#define D_CMND_NP_LIGHT "Light"
|
||||
#define D_CMND_NP_PHMIN "pHMin"
|
||||
#define D_CMND_NP_PHMAX "pHMax"
|
||||
#define D_CMND_NP_PH "pH"
|
||||
#define D_CMND_NP_REDOX "Redox"
|
||||
#define D_CMND_NP_HYDROLYSIS "Hydrolysis"
|
||||
#define D_CMND_NP_IONIZATION "Ionization"
|
||||
#define D_CMND_NP_CHLORINE "Chlorine"
|
||||
#define D_CMND_NP_CONTROL "Control"
|
||||
#define D_CMND_NP_SAVE "Save"
|
||||
#define D_CMND_NP_EXEC "Exec"
|
||||
#define D_CMND_NP_ESCAPE "Escape"
|
||||
|
|
@ -874,6 +911,14 @@ const char kNPCommands[] PROGMEM = D_PRFX_NEOPOOL "|" // Prefix
|
|||
D_CMND_NP_FILTRATIONMODE "|"
|
||||
D_CMND_NP_TIME "|"
|
||||
D_CMND_NP_LIGHT "|"
|
||||
D_CMND_NP_PHMIN "|"
|
||||
D_CMND_NP_PHMAX "|"
|
||||
D_CMND_NP_PH "|"
|
||||
D_CMND_NP_REDOX "|"
|
||||
D_CMND_NP_HYDROLYSIS "|"
|
||||
D_CMND_NP_IONIZATION "|"
|
||||
D_CMND_NP_CHLORINE "|"
|
||||
D_CMND_NP_CONTROL "|"
|
||||
D_CMND_NP_SAVE "|"
|
||||
D_CMND_NP_EXEC "|"
|
||||
D_CMND_NP_ESCAPE "|"
|
||||
|
|
@ -895,6 +940,14 @@ void (* const NPCommand[])(void) PROGMEM = {
|
|||
&CmndNeopoolFiltrationMode,
|
||||
&CmndNeopoolTime,
|
||||
&CmndNeopoolLight,
|
||||
&CmndNeopoolpHMin,
|
||||
&CmndNeopoolpHMax,
|
||||
&CmndNeopoolpHMax,
|
||||
&CmndNeopoolRedox,
|
||||
&CmndNeopoolHydrolysis,
|
||||
&CmndNeopoolIonization,
|
||||
&CmndNeopoolChlorine,
|
||||
&CmndNeopoolControl,
|
||||
&CmndNeopoolSave,
|
||||
&CmndNeopoolExec,
|
||||
&CmndNeopoolEscape,
|
||||
|
|
@ -925,17 +978,17 @@ void NeoPool250ms(void) // Every 250 mSec
|
|||
|
||||
bool data_ready = NeoPoolModbus->ReceiveReady();
|
||||
|
||||
if (data_ready && nullptr != NeoPoolReg[neopool_read_state].block.data) {
|
||||
uint8_t *buffer = (uint8_t *)malloc(5+(NeoPoolReg[neopool_read_state].block.cnt)*2);
|
||||
if (data_ready && nullptr != NeoPoolReg[neopool_read_state].data) {
|
||||
uint8_t *buffer = (uint8_t *)malloc(5+(NeoPoolReg[neopool_read_state].cnt)*2);
|
||||
|
||||
if (nullptr != buffer) {
|
||||
uint8_t error = NeoPoolModbus->ReceiveBuffer(buffer, NeoPoolReg[neopool_read_state].block.cnt); // cnt x 16bit register
|
||||
uint8_t error = NeoPoolModbus->ReceiveBuffer(buffer, NeoPoolReg[neopool_read_state].cnt); // cnt x 16bit register
|
||||
|
||||
if (0 == error) {
|
||||
neopool_failed_count = 0;
|
||||
neopool_error = false;
|
||||
for (uint32_t i = 0; i < NeoPoolReg[neopool_read_state].block.cnt; i++) {
|
||||
NeoPoolReg[neopool_read_state].block.data[i] = (buffer[i*2+3] << 8) | buffer[i*2+4];
|
||||
for (uint32_t i = 0; i < NeoPoolReg[neopool_read_state].cnt; i++) {
|
||||
NeoPoolReg[neopool_read_state].data[i] = (buffer[i*2+3] << 8) | buffer[i*2+4];
|
||||
}
|
||||
}
|
||||
#ifdef DEBUG_TASMOTA_SENSOR
|
||||
|
|
@ -947,7 +1000,7 @@ void NeoPool250ms(void) // Every 250 mSec
|
|||
}
|
||||
#ifdef DEBUG_TASMOTA_SENSOR
|
||||
else {
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: modbus block 0x%04X - 0x%04X skipped"), NeoPoolReg[neopool_read_state].block.addr, NeoPoolReg[neopool_read_state].block.addr+NeoPoolReg[neopool_read_state].block.cnt);
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: modbus block 0x%04X - 0x%04X skipped"), NeoPoolReg[neopool_read_state].addr, NeoPoolReg[neopool_read_state].addr+NeoPoolReg[neopool_read_state].cnt);
|
||||
}
|
||||
#endif // DEBUG_TASMOTA_SENSOR
|
||||
|
||||
|
|
@ -959,24 +1012,24 @@ void NeoPool250ms(void) // Every 250 mSec
|
|||
#endif // NEOPOOL_OPTIMIZE_READINGS
|
||||
}
|
||||
|
||||
if (nullptr != NeoPoolReg[neopool_read_state].block.data) {
|
||||
if (nullptr != NeoPoolReg[neopool_read_state].data) {
|
||||
if (0 == neopool_send_retry || data_ready) {
|
||||
neopool_send_retry = SENSOR_MAX_MISS; // controller sometimes takes long time to answer
|
||||
#ifdef NEOPOOL_OPTIMIZE_READINGS
|
||||
// optimize register block reads by attend to MBF_NOTIFICATION bits
|
||||
if (neopool_first_read || 0x0100 == (NeoPoolReg[neopool_read_state].block.addr & 0x0700) ||
|
||||
(NeoPoolGetData(MBF_NOTIFICATION) & (1 << (NeoPoolReg[neopool_read_state].block.addr >> 8)-1))) {
|
||||
if (neopool_first_read || 0x0100 == (NeoPoolReg[neopool_read_state].addr & 0x0700) ||
|
||||
(NeoPoolGetData(MBF_NOTIFICATION) & (1 << (NeoPoolReg[neopool_read_state].addr >> 8)-1))) {
|
||||
#endif // NEOPOOL_OPTIMIZE_READINGS
|
||||
#ifdef DEBUG_TASMOTA_SENSOR
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: modbus send(%d, %d, 0x%04X, %d)"), NEOPOOL_MODBUS_ADDRESS, NEOPOOL_READ_REGISTER, NeoPoolReg[neopool_read_state].block.addr, NeoPoolReg[neopool_read_state].block.cnt);
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: modbus send(%d, %d, 0x%04X, %d)"), NEOPOOL_MODBUS_ADDRESS, NEOPOOL_READ_REGISTER, NeoPoolReg[neopool_read_state].addr, NeoPoolReg[neopool_read_state].cnt);
|
||||
#endif // DEBUG_TASMOTA_SENSOR
|
||||
NeoPoolModbus->Send(NEOPOOL_MODBUS_ADDRESS, NEOPOOL_READ_REGISTER, NeoPoolReg[neopool_read_state].block.addr, NeoPoolReg[neopool_read_state].block.cnt);
|
||||
NeoPoolModbus->Send(NEOPOOL_MODBUS_ADDRESS, NEOPOOL_READ_REGISTER, NeoPoolReg[neopool_read_state].addr, NeoPoolReg[neopool_read_state].cnt);
|
||||
#ifdef NEOPOOL_OPTIMIZE_READINGS
|
||||
} else {
|
||||
// search next addr block having notification
|
||||
while ((NeoPoolReg[neopool_read_state].block.addr & 0x0F00) != 0x100 || (NeoPoolGetData(MBF_NOTIFICATION) & (1 << (NeoPoolReg[neopool_read_state].block.addr >> 8)-1))) {
|
||||
while ((NeoPoolReg[neopool_read_state].addr & 0x0F00) != 0x100 || (NeoPoolGetData(MBF_NOTIFICATION) & (1 << (NeoPoolReg[neopool_read_state].addr >> 8)-1))) {
|
||||
#ifdef DEBUG_TASMOTA_SENSOR
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: notify 0x%04X - addr block 0x%04X ignored"), NeoPoolGetData(MBF_NOTIFICATION), NeoPoolReg[neopool_read_state].block.addr);
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: notify 0x%04X - addr block 0x%04X ignored"), NeoPoolGetData(MBF_NOTIFICATION), NeoPoolReg[neopool_read_state].addr);
|
||||
#endif // DEBUG_TASMOTA_SENSOR
|
||||
++neopool_read_state %= nitems(NeoPoolReg);
|
||||
}
|
||||
|
|
@ -1026,12 +1079,12 @@ bool NeoPoolInitData(void)
|
|||
|
||||
neopool_error = true;
|
||||
for (uint32_t i = 0; i < nitems(NeoPoolReg); i++) {
|
||||
if (nullptr == NeoPoolReg[i].block.data) {
|
||||
NeoPoolReg[i].block.data = (uint16_t *)malloc(sizeof(uint16_t)*NeoPoolReg[i].block.cnt);
|
||||
if (nullptr != NeoPoolReg[i].block.data) {
|
||||
memset(NeoPoolReg[i].block.data, 0, sizeof(uint16_t)*NeoPoolReg[i].block.cnt);
|
||||
if (nullptr == NeoPoolReg[i].data) {
|
||||
NeoPoolReg[i].data = (uint16_t *)malloc(sizeof(uint16_t)*NeoPoolReg[i].cnt);
|
||||
if (nullptr != NeoPoolReg[i].data) {
|
||||
memset(NeoPoolReg[i].data, 0, sizeof(uint16_t)*NeoPoolReg[i].cnt);
|
||||
#ifdef DEBUG_TASMOTA_SENSOR
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: Init - addr 0x%04x cnt %d data %p"), NeoPoolReg[i].block.addr, NeoPoolReg[i].block.cnt, NeoPoolReg[i].block.data);
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NEO: Init - addr 0x%04x cnt %d data %p"), NeoPoolReg[i].addr, NeoPoolReg[i].cnt, NeoPoolReg[i].data);
|
||||
#endif // DEBUG_TASMOTA_SENSOR
|
||||
res = true;
|
||||
}
|
||||
|
|
@ -1239,8 +1292,8 @@ uint8_t NeoPoolWriteRegisterWord(uint16_t addr, uint16_t data)
|
|||
uint16_t NeoPoolGetData(uint16_t addr)
|
||||
{
|
||||
for (uint32_t i = 0; i < nitems(NeoPoolReg); i++) {
|
||||
if (nullptr != NeoPoolReg[i].block.data && addr >= NeoPoolReg[i].block.addr && addr < NeoPoolReg[i].block.addr+NeoPoolReg[i].block.cnt) {
|
||||
return NeoPoolReg[i].block.data[addr - NeoPoolReg[i].block.addr];
|
||||
if (nullptr != NeoPoolReg[i].data && addr >= NeoPoolReg[i].addr && addr < NeoPoolReg[i].addr+NeoPoolReg[i].cnt) {
|
||||
return NeoPoolReg[i].data[addr - NeoPoolReg[i].addr];
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
|
|
@ -1262,6 +1315,42 @@ uint32_t NeoPoolGetSpeedIndex(uint16_t speedvalue)
|
|||
}
|
||||
|
||||
|
||||
bool NeoPoolIsHydrolysis(void)
|
||||
{
|
||||
return (((NeoPoolGetData(MBF_PAR_MODEL) & MBMSK_MODEL_HIDRO)) ||
|
||||
(NeoPoolGetData(MBF_HIDRO_STATUS) & (MBMSK_HIDRO_STATUS_CTRL_ACTIVE | MBMSK_HIDRO_STATUS_CTRL_ACTIVE)));
|
||||
}
|
||||
|
||||
|
||||
bool NeoPoolIspHModule(void)
|
||||
{
|
||||
return (NeoPoolGetData(MBF_PH_STATUS) & MBMSK_PH_STATUS_MEASURE_ACTIVE);
|
||||
}
|
||||
|
||||
|
||||
bool NeoPoolIsRedox(void)
|
||||
{
|
||||
return (NeoPoolGetData(MBF_RX_STATUS) & MBMSK_RX_STATUS_MEASURE_ACTIVE);
|
||||
}
|
||||
|
||||
|
||||
bool NeoPoolIsChlorine(void)
|
||||
{
|
||||
return (NeoPoolGetData(MBF_CL_STATUS) & MBMSK_CL_STATUS_MEASURE_ACTIVE);
|
||||
}
|
||||
|
||||
|
||||
bool NeoPoolIsConductivity(void)
|
||||
{
|
||||
return (NeoPoolGetData(MBF_CD_STATUS) & MBMSK_CD_STATUS_MEASURE_ACTIVE);
|
||||
}
|
||||
|
||||
|
||||
bool NeoPoolIsIonization(void)
|
||||
{
|
||||
return (NeoPoolGetData(MBF_PAR_MODEL) & MBMSK_MODEL_ION);
|
||||
}
|
||||
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
|
|
@ -1329,8 +1418,17 @@ void NeoPoolShow(bool json)
|
|||
ResponseAppend_P(PSTR(",\"" D_TEMPERATURE "\":%*_f"), Settings->flag2.temperature_resolution, &fvalue);
|
||||
}
|
||||
|
||||
// Voltage
|
||||
{
|
||||
float f12volt = (float)NeoPoolGetData(MBF_VOLT_12)/1000;
|
||||
float f24_36volt = (float)NeoPoolGetData(MBF_VOLT_24_36)/1000;
|
||||
ResponseAppend_P(PSTR(",\"" D_VOLTAGE "\":{\"12\":%*_f,\"24\":%*_f}"),
|
||||
Settings->flag2.voltage_resolution, &f12volt,
|
||||
Settings->flag2.voltage_resolution, &f24_36volt);
|
||||
}
|
||||
|
||||
// pH
|
||||
if (NeoPoolGetData(MBF_PH_STATUS) & MBMSK_PH_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIspHModule()) {
|
||||
fvalue = (float)NeoPoolGetData(MBF_MEASURE_PH)/100;
|
||||
ResponseAppend_P(PSTR(",\"" D_PH "\":{\"" D_JSON_DATA "\":" NEOPOOL_FMT_PH), neopool_resolution.ph, &fvalue);
|
||||
|
||||
|
|
@ -1363,30 +1461,29 @@ void NeoPoolShow(bool json)
|
|||
}
|
||||
|
||||
// Redox
|
||||
if (NeoPoolGetData(MBF_RX_STATUS) & MBMSK_RX_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIsRedox()) {
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_REDOX "\":" NEOPOOL_FMT_RX), NeoPoolGetData(MBF_MEASURE_RX));
|
||||
}
|
||||
|
||||
// Chlorine
|
||||
if (NeoPoolGetData(MBF_CL_STATUS) & MBMSK_CL_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIsChlorine()) {
|
||||
fvalue = (float)NeoPoolGetData(MBF_MEASURE_CL)/100;
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_CHLORINE "\":" NEOPOOL_FMT_CL), neopool_resolution.cl, &fvalue);
|
||||
}
|
||||
|
||||
// Conductivity
|
||||
if (NeoPoolGetData(MBF_CD_STATUS) & MBMSK_CD_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIsConductivity()) {
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_CONDUCTIVITY "\":" NEOPOOL_FMT_CD), NeoPoolGetData(MBF_MEASURE_CONDUCTIVITY));
|
||||
}
|
||||
|
||||
// Ionization
|
||||
if (NeoPoolGetData(MBF_PAR_MODEL) & MBMSK_MODEL_ION) {
|
||||
if (NeoPoolIsIonization()) {
|
||||
fvalue = (float)NeoPoolGetData(MBF_ION_CURRENT);
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_IONIZATION "\":" NEOPOOL_FMT_ION), neopool_resolution.ion, &fvalue);
|
||||
}
|
||||
|
||||
// Hydrolysis
|
||||
if (((NeoPoolGetData(MBF_PAR_MODEL) & MBMSK_MODEL_HIDRO)) ||
|
||||
(NeoPoolGetData(MBF_HIDRO_STATUS) & (MBMSK_HIDRO_STATUS_CTRL_ACTIVE | MBMSK_HIDRO_STATUS_CTRL_ACTIVE))) {
|
||||
if (NeoPoolIsHydrolysis()) {
|
||||
fvalue = (float)NeoPoolGetData(MBF_HIDRO_CURRENT)/10;
|
||||
const char *sunit;
|
||||
int dec = 1;
|
||||
|
|
@ -1447,7 +1544,7 @@ void NeoPoolShow(bool json)
|
|||
|
||||
// Relays
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_RELAY "\":{\"" D_NEOPOOL_JSON_STATE "\":["));
|
||||
for(uint16_t i = 0; i < 8; i++) {
|
||||
for(uint16_t i = 0; i < NEOPOOL_RELAY_MAX; i++) {
|
||||
ResponseAppend_P(PSTR("%s%d"), i ? PSTR(",") : PSTR(""), (NeoPoolGetData(MBF_RELAY_STATE) >> i) & 1);
|
||||
}
|
||||
ResponseAppend_P(PSTR("]"));
|
||||
|
|
@ -1496,9 +1593,17 @@ void NeoPoolShow(bool json)
|
|||
WSContentSend_PD(HTTP_SNS_F_TEMP, neopool_type, Settings->flag2.temperature_resolution, &fvalue, TempUnit());
|
||||
}
|
||||
|
||||
// Voltage
|
||||
{
|
||||
float f12volt = (float)NeoPoolGetData(MBF_VOLT_12)/1000;
|
||||
float f24_36volt = (float)NeoPoolGetData(MBF_VOLT_24_36)/1000;
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_VOLTAGE, neopool_type,
|
||||
Settings->flag2.voltage_resolution, &f12volt,
|
||||
Settings->flag2.voltage_resolution, &f24_36volt);
|
||||
}
|
||||
|
||||
// Hydrolysis
|
||||
if (((NeoPoolGetData(MBF_PAR_MODEL) & MBMSK_MODEL_HIDRO)) ||
|
||||
(NeoPoolGetData(MBF_HIDRO_STATUS) & (MBMSK_HIDRO_STATUS_CTRL_ACTIVE | MBMSK_HIDRO_STATUS_CTRL_ACTIVE))) {
|
||||
if (NeoPoolIsHydrolysis()) {
|
||||
// Data
|
||||
fvalue = (float)NeoPoolGetData(MBF_HIDRO_CURRENT)/10;
|
||||
const char *sunit = PSTR("%");
|
||||
|
|
@ -1546,7 +1651,7 @@ void NeoPoolShow(bool json)
|
|||
}
|
||||
|
||||
// pH
|
||||
if (NeoPoolGetData(MBF_PH_STATUS) & MBMSK_PH_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIspHModule()) {
|
||||
// Data
|
||||
fvalue = (float)NeoPoolGetData(MBF_MEASURE_PH)/100;
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_PH, neopool_type, neopool_resolution.ph, &fvalue);
|
||||
|
|
@ -1589,7 +1694,7 @@ void NeoPoolShow(bool json)
|
|||
// Status/Alarm: S1 S2
|
||||
// S1: 0
|
||||
// S2: FL1
|
||||
if (NeoPoolGetData(MBF_RX_STATUS) & MBMSK_RX_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIsRedox()) {
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_REDOX, neopool_type, NeoPoolGetData(MBF_MEASURE_RX));
|
||||
WSContentSend_PD(PSTR(" "));
|
||||
// S1
|
||||
|
|
@ -1601,18 +1706,18 @@ void NeoPoolShow(bool json)
|
|||
}
|
||||
|
||||
// Chlorine
|
||||
if (NeoPoolGetData(MBF_CL_STATUS) & MBMSK_CL_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIsChlorine()) {
|
||||
fvalue = (float)NeoPoolGetData(MBF_MEASURE_CL)/100;
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_PPM_CHLORINE, neopool_type, neopool_resolution.ph, &fvalue);
|
||||
}
|
||||
|
||||
// Conductivity
|
||||
if (NeoPoolGetData(MBF_CD_STATUS) & MBMSK_CD_STATUS_MEASURE_ACTIVE) {
|
||||
if (NeoPoolIsConductivity()) {
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_CONDUCTIVITY, neopool_type, NeoPoolGetData(MBF_MEASURE_CONDUCTIVITY));
|
||||
}
|
||||
|
||||
// Ionization
|
||||
if (NeoPoolGetData(MBF_PAR_MODEL) & MBMSK_MODEL_ION) {
|
||||
if (NeoPoolIsIonization()) {
|
||||
char spol[32];
|
||||
snprintf_P(spol, sizeof(spol), PSTR(" " D_NEOPOOL_POLARIZATION "%d"), NeoPoolGetData(MBF_ION_STATUS)>>13);
|
||||
snprintf_P(stemp, sizeof(stemp), PSTR("%s%s%s"),
|
||||
|
|
@ -1629,7 +1734,7 @@ void NeoPoolShow(bool json)
|
|||
WSContentSend_PD(HTTP_SNS_NEOPOOL_FILT_MODE, neopool_type, stemp);
|
||||
|
||||
// Relays
|
||||
for (uint32_t i = 0; i < 8; i++) {
|
||||
for (uint32_t i = 0; i < NEOPOOL_RELAY_MAX; i++) {
|
||||
char sdesc[24];
|
||||
memset(sdesc, 0, nitems(sdesc));
|
||||
memset(stemp, 0, nitems(stemp));
|
||||
|
|
@ -1657,18 +1762,15 @@ void NeoPoolShow(bool json)
|
|||
snprintf_P(sdesc, sizeof(sdesc), PSTR(D_NEOPOOL_RELAY " %d"), i+1);
|
||||
}
|
||||
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_RELAY,neopool_type, sdesc,
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_RELAY, neopool_type, sdesc,
|
||||
'\0' == *stemp ? ((NeoPoolGetData(MBF_RELAY_STATE) & (1<<i))?PSTR(D_ON):PSTR(D_OFF)) : stemp);
|
||||
}
|
||||
|
||||
#ifndef NEOPOOL_OPTIMIZE_READINGS
|
||||
{
|
||||
// Cell runtime
|
||||
char dt[16];
|
||||
TIME_T tmpTime;
|
||||
BreakTime((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_LOW) + ((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_HIGH) << 16), tmpTime);
|
||||
snprintf_P(dt, sizeof(dt), PSTR("%dT%02d:%02d"), tmpTime.days, tmpTime.hour, tmpTime.minute);
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_CELL_RUNTIME, neopool_type, dt);
|
||||
WSContentSend_PD(HTTP_SNS_NEOPOOL_CELL_RUNTIME, neopool_type,
|
||||
GetDuration((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_LOW) + ((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_HIGH) << 16)).c_str());
|
||||
}
|
||||
#endif // NEOPOOL_OPTIMIZE_READINGS
|
||||
|
||||
|
|
@ -1975,7 +2077,7 @@ void CmndNeopoolLight(void)
|
|||
NeopoolResponseError();
|
||||
return;
|
||||
}
|
||||
if (neopool_light_relay >= 1 && neopool_light_relay <= 8) {
|
||||
if (neopool_light_relay >= 1 && neopool_light_relay <= NEOPOOL_RELAY_MAX) {
|
||||
// get/set light
|
||||
if (1 == params_cnt && XdrvMailbox.payload >= 0 && XdrvMailbox.payload < nitems(timer_val)) {
|
||||
if (POWER_TOGGLE == timer_val[XdrvMailbox.payload]) {
|
||||
|
|
@ -2056,6 +2158,152 @@ void CmndNeopoolLightPrgEnd(void)
|
|||
}
|
||||
|
||||
|
||||
bool CmndNeopoolSetParam(uint16_t reg, uint16_t factor, float min, float max)
|
||||
{
|
||||
uint16_t data;
|
||||
|
||||
if (XdrvMailbox.data_len) {
|
||||
data = (int)(CharToFloat(XdrvMailbox.data) * (float)factor);
|
||||
if (data >= min*(float)factor && data <= max*(float)factor) {
|
||||
if (NEOPOOL_MODBUS_OK != NeoPoolWriteRegisterWord(reg, data) ||
|
||||
NEOPOOL_MODBUS_OK != NeoPoolWriteRegisterWord(MBF_EXEC, 1) ||
|
||||
NEOPOOL_MODBUS_OK != NeoPoolWriteRegisterWord(MBF_SAVE_TO_EEPROM, 1)) {
|
||||
NeopoolResponseError();
|
||||
return false;
|
||||
} else {
|
||||
return true;
|
||||
}
|
||||
} else {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
void CmndNeopoolGetParam(uint16_t reg, uint16_t factor, uint16_t res)
|
||||
{
|
||||
uint16_t data;
|
||||
|
||||
if (NEOPOOL_MODBUS_OK != NeoPoolReadRegister(reg, &data, 1)) {
|
||||
NeopoolResponseError();
|
||||
return;
|
||||
}
|
||||
ResponseCmndFloat((float)(data) / (float)factor, res);
|
||||
}
|
||||
|
||||
void CmndNeopoolpHMin(void)
|
||||
{
|
||||
if (NeoPoolIspHModule()) {
|
||||
uint16_t data;
|
||||
// read pH max
|
||||
if (NEOPOOL_MODBUS_OK != NeoPoolReadRegister(MBF_PAR_PH1, &data, 1)) {
|
||||
NeopoolResponseError();
|
||||
return;
|
||||
}
|
||||
if (CmndNeopoolSetParam(MBF_PAR_PH2, 100, 0, (float)data/100)) {
|
||||
CmndNeopoolGetParam(MBF_PAR_PH2, 100, neopool_resolution.ph);
|
||||
}
|
||||
} else {
|
||||
NeopoolCmndError();
|
||||
}
|
||||
}
|
||||
|
||||
void CmndNeopoolpHMax(void)
|
||||
{
|
||||
if (NeoPoolIspHModule()) {
|
||||
uint16_t data;
|
||||
// read pH min
|
||||
if (NEOPOOL_MODBUS_OK != NeoPoolReadRegister(MBF_PAR_PH2, &data, 1)) {
|
||||
NeopoolResponseError();
|
||||
return;
|
||||
}
|
||||
if (CmndNeopoolSetParam(MBF_PAR_PH1, 100, (float)data/100, 14)) {
|
||||
CmndNeopoolGetParam(MBF_PAR_PH1, 100, neopool_resolution.ph);
|
||||
}
|
||||
} else {
|
||||
NeopoolCmndError();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void CmndNeopoolRedox(void)
|
||||
{
|
||||
if (NeoPoolIsRedox()) {
|
||||
if (CmndNeopoolSetParam(MBF_PAR_RX1, 1, 0, 1000)) {
|
||||
CmndNeopoolGetParam(MBF_PAR_RX1, 1, 0);
|
||||
}
|
||||
} else {
|
||||
NeopoolCmndError();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void CmndNeopoolHydrolysis(void)
|
||||
{
|
||||
if (NeoPoolIsHydrolysis()) {
|
||||
uint16_t data;
|
||||
// read hydrolysis maximum production level
|
||||
if (NEOPOOL_MODBUS_OK != NeoPoolReadRegister(MBF_PAR_HIDRO_NOM, &data, 1)) {
|
||||
NeopoolResponseError();
|
||||
return;
|
||||
}
|
||||
if (CmndNeopoolSetParam(MBF_PAR_HIDRO, 10, 0, (float)data/10)) {
|
||||
CmndNeopoolGetParam(MBF_PAR_HIDRO, 10, 0);
|
||||
}
|
||||
} else {
|
||||
NeopoolCmndError();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void CmndNeopoolIonization(void)
|
||||
{
|
||||
if (NeoPoolIsIonization()) {
|
||||
uint16_t data;
|
||||
// read ionization maximum production level
|
||||
if (NEOPOOL_MODBUS_OK != NeoPoolReadRegister(MBF_PAR_ION_NOM, &data, 1)) {
|
||||
NeopoolResponseError();
|
||||
return;
|
||||
}
|
||||
if (CmndNeopoolSetParam(MBF_PAR_ION, 1, 0, (float)data)) {
|
||||
CmndNeopoolGetParam(MBF_PAR_ION, 1, neopool_resolution.ion);
|
||||
}
|
||||
} else {
|
||||
NeopoolCmndError();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void CmndNeopoolChlorine(void)
|
||||
{
|
||||
if (NeoPoolIsChlorine()) {
|
||||
if (CmndNeopoolSetParam(MBF_PAR_CL1, 100, 0, 10)) {
|
||||
CmndNeopoolGetParam(MBF_PAR_CL1, 100, neopool_resolution.cl);
|
||||
}
|
||||
} else {
|
||||
NeopoolCmndError();
|
||||
}
|
||||
}
|
||||
|
||||
void CmndNeopoolControl(void)
|
||||
{
|
||||
Response_P(PSTR("{\"Modules\":{"));
|
||||
ResponseAppend_P(PSTR( "\"" D_NEOPOOL_JSON_HYDROLYSIS "\":%d"), NeoPoolIsHydrolysis());
|
||||
ResponseAppend_P(PSTR(",\"" D_JSON_PH "\":%d"), NeoPoolIspHModule());
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_REDOX "\":%d"), NeoPoolIsRedox());
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_CHLORINE "\":%d"), NeoPoolIsChlorine());
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_CONDUCTIVITY "\":%d"), NeoPoolIsConductivity());
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_IONIZATION "\":%d"), NeoPoolIsIonization());
|
||||
ResponseJsonEnd();
|
||||
ResponseAppend_P(PSTR(",\"Relay\":{"));
|
||||
ResponseAppend_P(PSTR( "\"" D_NEOPOOL_JSON_RELAY_PH_ACID "\":%d"), NeoPoolGetData(MBF_PAR_PH_ACID_RELAY_GPIO));
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_RELAY_PH_BASE "\":%d"), NeoPoolGetData(MBF_PAR_PH_BASE_RELAY_GPIO));
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_RELAY_RX "\":%d"), NeoPoolGetData(MBF_PAR_RX_RELAY_GPIO));
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_RELAY_CL "\":%d"), NeoPoolGetData(MBF_PAR_CL_RELAY_GPIO));
|
||||
ResponseAppend_P(PSTR(",\"" D_NEOPOOL_JSON_RELAY_CD "\":%d"), NeoPoolGetData(MBF_PAR_CD_RELAY_GPIO));
|
||||
ResponseJsonEndEnd();
|
||||
}
|
||||
|
||||
void CmndNeopoolSave(void)
|
||||
{
|
||||
if (NEOPOOL_MODBUS_OK == NeoPoolWriteRegisterWord(MBF_SAVE_TO_EEPROM, 1)) {
|
||||
|
|
|
|||
Loading…
Reference in New Issue