mirror of https://github.com/arendst/Tasmota.git
Solax X1: Delete all references to old driver
This commit is contained in:
pablozg
parent
926869e849
commit
d7279fa2aa
|
|
@ -457,7 +457,7 @@
|
|||
#define DDS2382_SPEED 9600 // Hiking DDS2382 Modbus RS485 serial speed (default: 9600 baud)
|
||||
//#define USE_DDSU666 // Add support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
#define DDSU666_SPEED 9600 // Chint DDSU666 Modbus RS485 serial speed (default: 9600 baud)
|
||||
//#define USE_SOLAX_X1_NRG // Add support for Solax X1 series Modbus log info (+3k1 code)
|
||||
//#define USE_SOLAX_X1 // Add support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#define SOLAXX1_SPEED 9600 // Solax X1 Modbus RS485 serial speed (default: 9600 baud)
|
||||
#define SOLAXX1_PV2 // Solax X1 using second PV
|
||||
|
||||
|
|
@ -466,9 +466,6 @@
|
|||
#define USE_SDM220 // Add extra parameters for SDM220 (+0k1 code)
|
||||
//#define USE_SDM630 // Add support for Eastron SDM630-Modbus energy meter (+2k code)
|
||||
// #define SDM630_SPEED 9600 // SDM630-Modbus RS485 serial speed (default: 9600 baud)
|
||||
//#define USE_SOLAX_X1 // Add support for Solax X1 series Modbus log info (+3k6 code)
|
||||
#define SOLAXX1_SPEED 9600 // Solax X1 Modbus RS485 serial speed (default: 9600 baud)
|
||||
#define SOLAXX1_PV2 // Solax X1 using second PV
|
||||
|
||||
// -- Low level interface devices -----------------
|
||||
#define USE_DHT // Add support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor (1k6 code)
|
||||
|
|
|
|||
|
|
@ -189,10 +189,9 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
#define USE_SDM630_2 // Add support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
#define USE_DDS2382 // Add support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
#define USE_DDSU666 // Add support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
//#define USE_SOLAX_X1_NRG // Add support for Solax X1 series Modbus log info (+3k1 code)
|
||||
//#define USE_SOLAX_X1 // Add support for Solax X1 series Modbus log info (+3k1 code)
|
||||
//#define USE_SDM120 // Add support for Eastron SDM120-Modbus energy meter (+1k7 code)
|
||||
//#define USE_SDM630 // Add support for Eastron SDM630-Modbus energy meter (+2k code)
|
||||
//#define USE_SOLAX_X1 // Add support for Solax X1 series Modbus log info (+3k6 code)
|
||||
|
||||
#define USE_DHT // Add support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
||||
#define USE_MAX31855 // Add support for MAX31855 K-Type thermocouple sensor using softSPI
|
||||
|
|
@ -295,10 +294,9 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
#undef USE_SDM630_2 // Disable support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDS2382 // Disable support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDSU666 // Disable support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_SOLAX_X1_NRG // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SDM120 // Disable support for Eastron SDM120-Modbus energy meter
|
||||
#undef USE_SDM630 // Disable support for Eastron SDM630-Modbus energy meter
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k6 code)
|
||||
|
||||
#define USE_DHT // Add support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
||||
#undef USE_MAX31855 // Disable MAX31855 K-Type thermocouple sensor using softSPI
|
||||
|
|
@ -378,10 +376,9 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
#undef USE_SDM630_2 // Disable support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDS2382 // Disable support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDSU666 // Disable support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_SOLAX_X1_NRG // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SDM120 // Disable support for Eastron SDM120-Modbus energy meter
|
||||
#undef USE_SDM630 // Disable support for Eastron SDM630-Modbus energy meter
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k6 code)
|
||||
|
||||
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
||||
#define USE_DISPLAY // Add I2C Display Support (+2k code)
|
||||
|
|
@ -460,10 +457,9 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
#undef USE_SDM630_2 // Disable support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDS2382 // Disable support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDSU666 // Disable support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_SOLAX_X1_NRG // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SDM120 // Disable support for Eastron SDM120-Modbus energy meter
|
||||
#undef USE_SDM630 // Disable support for Eastron SDM630-Modbus energy meter
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k6 code)
|
||||
|
||||
#undef USE_DS18x20 // Disable support for DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
||||
|
||||
|
|
@ -576,10 +572,9 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
#undef USE_SDM630_2 // Disable support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDS2382 // Disable support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDSU666 // Disable support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_SOLAX_X1_NRG // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SDM120 // Disable support for Eastron SDM120-Modbus energy meter
|
||||
#undef USE_SDM630 // Disable support for Eastron SDM630-Modbus energy meter
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+4k1 code)
|
||||
|
||||
#undef USE_DHT // Disable support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
||||
#undef USE_MAX31855 // Disable MAX31855 K-Type thermocouple sensor using softSPI
|
||||
|
|
@ -679,10 +674,9 @@ char* ToHex_P(const unsigned char * in, size_t insz, char * out, size_t outsz, c
|
|||
#undef USE_SDM630_2 // Disable support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDS2382 // Disable support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_DDSU666 // Disable support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
||||
#undef USE_SOLAX_X1_NRG // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k1 code)
|
||||
#undef USE_SDM120 // Disable support for Eastron SDM120-Modbus energy meter
|
||||
#undef USE_SDM630 // Disable support for Eastron SDM630-Modbus energy meter
|
||||
#undef USE_SOLAX_X1 // Disable support for Solax X1 series Modbus log info (+3k6 code)
|
||||
|
||||
#undef USE_DHT // Disable support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
||||
#undef USE_MAX31855 // Disable MAX31855 K-Type thermocouple sensor using softSPI
|
||||
|
|
|
|||
|
|
@ -650,10 +650,10 @@ const uint8_t kGpioNiceList[] PROGMEM = {
|
|||
GPIO_DDSU666_TX, // DDSU666 Serial interface
|
||||
GPIO_DDSU666_RX, // DDSU666 Serial interface
|
||||
#endif // USE_DDSU666
|
||||
#ifdef USE_SOLAX_X1_NRG
|
||||
#ifdef USE_SOLAX_X1
|
||||
GPIO_SOLAXX1_TX, // Solax Inverter tx pin
|
||||
GPIO_SOLAXX1_RX, // Solax Inverter rx pin
|
||||
#endif // USE_SOLAX_X1_NRG
|
||||
#endif // USE_SOLAX_X1
|
||||
#endif // USE_ENERGY_SENSOR
|
||||
#ifndef USE_SDM120_2
|
||||
#ifdef USE_SDM120
|
||||
|
|
@ -667,12 +667,6 @@ const uint8_t kGpioNiceList[] PROGMEM = {
|
|||
GPIO_SDM630_RX, // SDM630 Serial interface
|
||||
#endif
|
||||
#endif // USE_SDM630_2
|
||||
#ifndef USE_SOLAX_X1_NRG
|
||||
#ifdef USE_SOLAX_X1
|
||||
GPIO_SOLAXX1_TX, // Solax Inverter tx pin
|
||||
GPIO_SOLAXX1_RX, // Solax Inverter rx pin
|
||||
#endif
|
||||
#endif // USE_SOLAX_X1_NRG
|
||||
|
||||
#ifdef USE_SERIAL_BRIDGE
|
||||
GPIO_SBR_TX, // Serial Bridge Serial interface
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
*/
|
||||
|
||||
#ifdef USE_ENERGY_SENSOR
|
||||
#ifdef USE_SOLAX_X1_NRG
|
||||
#ifdef USE_SOLAX_X1
|
||||
/*********************************************************************************************\
|
||||
* Solax X1 Inverter
|
||||
\*********************************************************************************************/
|
||||
|
|
|
|||
|
|
@ -1,565 +0,0 @@
|
|||
/*
|
||||
xsns_48_solaxX1.ino - Solax X1 inverter RS485 support for Sonoff-Tasmota
|
||||
|
||||
Copyright (C) 2019 Pablo Zerón
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifdef USE_SOLAX_X1
|
||||
/*********************************************************************************************\
|
||||
* Solax X1 Inverter
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XSNS_49 49
|
||||
|
||||
#ifndef SOLAXX1_SPEED
|
||||
#define SOLAXX1_SPEED 9600 // default solax rs485 speed
|
||||
#endif
|
||||
|
||||
#define INVERTER_ADDRESS 0x0A
|
||||
|
||||
#define D_SOLAX_X1 "SolaxX1"
|
||||
|
||||
#include <TasmotaSerial.h>
|
||||
|
||||
enum solaxX1_Error
|
||||
{
|
||||
solaxX1_ERR_NO_ERROR,
|
||||
solaxX1_ERR_CRC_ERROR
|
||||
};
|
||||
|
||||
union {
|
||||
uint32_t ErrMessage;
|
||||
struct {
|
||||
//BYTE0
|
||||
uint8_t TzProtectFault:1;//0
|
||||
uint8_t MainsLostFault:1;//1
|
||||
uint8_t GridVoltFault:1;//2
|
||||
uint8_t GridFreqFault:1;//3
|
||||
uint8_t PLLLostFault:1;//4
|
||||
uint8_t BusVoltFault:1;//5
|
||||
uint8_t ErrBit06:1;//6
|
||||
uint8_t OciFault:1;//7
|
||||
//BYTE1
|
||||
uint8_t Dci_OCP_Fault:1;//8
|
||||
uint8_t ResidualCurrentFault:1;//9
|
||||
uint8_t PvVoltFault:1;//10
|
||||
uint8_t Ac10Mins_Voltage_Fault:1;//11
|
||||
uint8_t IsolationFault:1;//12
|
||||
uint8_t TemperatureOverFault:1;//13
|
||||
uint8_t FanFault:1;//14
|
||||
uint8_t ErrBit15:1;//15
|
||||
//BYTE2
|
||||
uint8_t SpiCommsFault:1;//16
|
||||
uint8_t SciCommsFault:1;//17
|
||||
uint8_t ErrBit18:1;//18
|
||||
uint8_t InputConfigFault:1;//19
|
||||
uint8_t EepromFault:1;//20
|
||||
uint8_t RelayFault:1;//21
|
||||
uint8_t SampleConsistenceFault:1;//22
|
||||
uint8_t ResidualCurrent_DeviceFault:1;//23
|
||||
//BYTE3
|
||||
uint8_t ErrBit24:1;//24
|
||||
uint8_t ErrBit25:1;//25
|
||||
uint8_t ErrBit26:1;//26
|
||||
uint8_t ErrBit27:1;//27
|
||||
uint8_t ErrBit28:1;//28
|
||||
uint8_t DCI_DeviceFault:1;//29
|
||||
uint8_t OtherDeviceFault:1;//30
|
||||
uint8_t ErrBit31:1;//31
|
||||
};
|
||||
} ErrCode;
|
||||
|
||||
const char kSolaxMode[] PROGMEM = D_WAITING "|" D_CHECKING "|" D_WORKING "|" D_FAILURE;
|
||||
|
||||
const char kSolaxError[] PROGMEM =
|
||||
D_SOLAX_ERROR_0 "|" D_SOLAX_ERROR_1 "|" D_SOLAX_ERROR_2 "|" D_SOLAX_ERROR_3 "|" D_SOLAX_ERROR_4 "|" D_SOLAX_ERROR_5 "|"
|
||||
D_SOLAX_ERROR_6 "|" D_SOLAX_ERROR_7 "|" D_SOLAX_ERROR_8;
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
TasmotaSerial *solaxX1Serial;
|
||||
|
||||
uint8_t solaxX1_Init = 1;
|
||||
|
||||
struct SOLAXX1 {
|
||||
float temperature = 0;
|
||||
float energy_today = 0;
|
||||
float dc1_voltage = 0;
|
||||
float dc2_voltage = 0;
|
||||
float dc1_current = 0;
|
||||
float dc2_current = 0;
|
||||
float ac_current = 0;
|
||||
float ac_voltage = 0;
|
||||
float frequency = 0;
|
||||
float power = 0;
|
||||
float energy_total = 0;
|
||||
float runtime_total = 0;
|
||||
float dc1_power = 0;
|
||||
float dc2_power = 0;
|
||||
|
||||
uint8_t status = 0;
|
||||
uint32_t errorCode = 0;
|
||||
} solaxX1;
|
||||
|
||||
union {
|
||||
uint8_t status;
|
||||
struct {
|
||||
uint8_t freeBit7:1; // Bit7
|
||||
uint8_t freeBit6:1; // Bit6
|
||||
uint8_t freeBit5:1; // Bit5
|
||||
uint8_t queryOffline:1; // Bit4
|
||||
uint8_t queryOfflineSend:1; // Bit3
|
||||
uint8_t hasAddress:1; // Bit2
|
||||
uint8_t inverterAddressSend:1; // Bit1
|
||||
uint8_t inverterSnReceived:1; // Bit0
|
||||
};
|
||||
} protocolStatus;
|
||||
|
||||
uint8_t header[2] = {0xAA, 0x55};
|
||||
uint8_t source[2] = {0x00, 0x00};
|
||||
uint8_t destination[2] = {0x00, 0x00};
|
||||
uint8_t controlCode[1] = {0x00};
|
||||
uint8_t functionCode[1] = {0x00};
|
||||
uint8_t dataLength[1] = {0x00};
|
||||
uint8_t data[16] = {0};
|
||||
|
||||
uint8_t message[30];
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
bool solaxX1_RS485ReceiveReady(void)
|
||||
{
|
||||
return (solaxX1Serial->available() > 1);
|
||||
}
|
||||
|
||||
void solaxX1_RS485Send(uint16_t msgLen)
|
||||
{
|
||||
memcpy(message, header, 2);
|
||||
memcpy(message + 2, source, 2);
|
||||
memcpy(message + 4, destination, 2);
|
||||
memcpy(message + 6, controlCode, 1);
|
||||
memcpy(message + 7, functionCode, 1);
|
||||
memcpy(message + 8, dataLength, 1);
|
||||
memcpy(message + 9, data, sizeof(data));
|
||||
uint16_t crc = solaxX1_calculateCRC(message, msgLen); // calculate out crc bytes
|
||||
|
||||
while (solaxX1Serial->available() > 0)
|
||||
{ // read serial if any old data is available
|
||||
solaxX1Serial->read();
|
||||
}
|
||||
|
||||
solaxX1Serial->flush();
|
||||
solaxX1Serial->write(message, msgLen);
|
||||
solaxX1Serial->write(highByte(crc));
|
||||
solaxX1Serial->write(lowByte(crc));
|
||||
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, message, msgLen);
|
||||
}
|
||||
|
||||
uint8_t solaxX1_RS485Receive(uint8_t *value)
|
||||
{
|
||||
uint8_t len = 0;
|
||||
|
||||
while (solaxX1Serial->available() > 0)
|
||||
{
|
||||
value[len++] = (uint8_t)solaxX1Serial->read();
|
||||
}
|
||||
|
||||
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, value, len);
|
||||
uint16_t crc = solaxX1_calculateCRC(value, len - 2); // calculate out crc bytes
|
||||
|
||||
if (value[len - 1] == lowByte(crc) && value[len - 2] == highByte(crc))
|
||||
{ // check calc crc with received crc
|
||||
return solaxX1_ERR_NO_ERROR;
|
||||
}
|
||||
else
|
||||
{
|
||||
return solaxX1_ERR_CRC_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
uint16_t solaxX1_calculateCRC(uint8_t *bExternTxPackage, uint8_t bLen)
|
||||
{
|
||||
uint8_t i;
|
||||
uint16_t wChkSum;
|
||||
wChkSum = 0;
|
||||
|
||||
for (i = 0; i < bLen; i++)
|
||||
{
|
||||
wChkSum = wChkSum + bExternTxPackage[i];
|
||||
}
|
||||
return wChkSum;
|
||||
}
|
||||
|
||||
void solaxX1_SendInverterAddress()
|
||||
{
|
||||
source[0] = 0x00;
|
||||
destination[0] = 0x00;
|
||||
destination[1] = 0x00;
|
||||
controlCode[0] = 0x10;
|
||||
functionCode[0] = 0x01;
|
||||
dataLength[0] = 0x0F;
|
||||
data[14] = INVERTER_ADDRESS; // Inverter Address, It must be unique in case of more inverters in the same rs485 net.
|
||||
solaxX1_RS485Send(24);
|
||||
}
|
||||
|
||||
void solaxX1_QueryLiveData()
|
||||
{
|
||||
source[0] = 0x01;
|
||||
destination[0] = 0x00;
|
||||
destination[1] = INVERTER_ADDRESS;
|
||||
controlCode[0] = 0x11;
|
||||
functionCode[0] = 0x02;
|
||||
dataLength[0] = 0x00;
|
||||
solaxX1_RS485Send(9);
|
||||
}
|
||||
|
||||
uint8_t solaxX1_ParseErrorCode(uint32_t code){
|
||||
ErrCode.ErrMessage = code;
|
||||
|
||||
if (code == 0) return 0;
|
||||
if (ErrCode.MainsLostFault) return 1;
|
||||
if (ErrCode.GridVoltFault) return 2;
|
||||
if (ErrCode.GridFreqFault) return 3;
|
||||
if (ErrCode.PvVoltFault) return 4;
|
||||
if (ErrCode.IsolationFault) return 5;
|
||||
if (ErrCode.TemperatureOverFault) return 6;
|
||||
if (ErrCode.FanFault) return 7;
|
||||
if (ErrCode.OtherDeviceFault) return 8;
|
||||
}
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
uint8_t solaxX1_send_retry = 0;
|
||||
uint8_t solaxX1_nodata_count = 0;
|
||||
|
||||
void solaxX1EverySecond(void) // Every Second
|
||||
{
|
||||
uint8_t value[61] = {0};
|
||||
bool data_ready = solaxX1_RS485ReceiveReady();
|
||||
|
||||
if (protocolStatus.hasAddress && (data_ready || solaxX1_send_retry == 0))
|
||||
{
|
||||
if (data_ready)
|
||||
{
|
||||
uint8_t error = solaxX1_RS485Receive(value);
|
||||
if (error)
|
||||
{
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: Data response CRC error"));
|
||||
}
|
||||
else
|
||||
{
|
||||
solaxX1_nodata_count = 0;
|
||||
solaxX1_send_retry = 3;
|
||||
|
||||
solaxX1.temperature = (float)((value[9] << 8) | value[10]); // Temperature
|
||||
solaxX1.energy_today = (float)((value[11] << 8) | value[12]) * 0.1f; // Energy Today
|
||||
solaxX1.dc1_voltage = (float)((value[13] << 8) | value[14]) * 0.1f; // PV1 Voltage
|
||||
solaxX1.dc2_voltage = (float)((value[15] << 8) | value[16]) * 0.1f; // PV2 Voltage
|
||||
solaxX1.dc1_current = (float)((value[17] << 8) | value[18]) * 0.1f; // PV1 Current
|
||||
solaxX1.dc2_current = (float)((value[19] << 8) | value[20]) * 0.1f; // PV2 Current
|
||||
solaxX1.ac_current = (float)((value[21] << 8) | value[22]) * 0.1f; // AC Current
|
||||
solaxX1.ac_voltage = (float)((value[23] << 8) | value[24]) * 0.1f; // AC Voltage
|
||||
solaxX1.frequency = (float)((value[25] << 8) | value[26]) * 0.01f; // AC Frequency
|
||||
solaxX1.power = (float)((value[27] << 8) | value[28]); // AC Power
|
||||
//temporal = (float)((value[29] << 8) | value[30]) * 0.1f; // Not Used
|
||||
solaxX1.energy_total = (float)((value[31] << 8) | (value[32] << 8) | (value[33] << 8) | value[34]) * 0.1f; // Energy Total
|
||||
solaxX1.runtime_total = (float)((value[35] << 8) | (value[36] << 8) | (value[37] << 8) | value[38]); // Work Time Total
|
||||
solaxX1.status = (uint8_t)((value[39] << 8) | value[40]); // Work mode
|
||||
//temporal = (float)((value[41] << 8) | value[42]); // Grid voltage fault value 0.1V
|
||||
//temporal = (float)((value[43] << 8) | value[44]); // Gird frequency fault value 0.01Hz
|
||||
//temporal = (float)((value[45] << 8) | value[46]); // Dc injection fault value 1mA
|
||||
//temporal = (float)((value[47] << 8) | value[48]); // Temperature fault value
|
||||
//temporal = (float)((value[49] << 8) | value[50]); // Pv1 voltage fault value 0.1V
|
||||
//temporal = (float)((value[51] << 8) | value[52]); // Pv2 voltage fault value 0.1V
|
||||
//temporal = (float)((value[53] << 8) | value[54]); // GFC fault value
|
||||
solaxX1.errorCode = (uint32_t)((value[58] << 8) | (value[57] << 8) | (value[56] << 8) | value[55]); // Error Code
|
||||
|
||||
solaxX1.dc1_power = solaxX1.dc1_voltage * solaxX1.dc1_current;
|
||||
solaxX1.dc2_power = solaxX1.dc2_voltage * solaxX1.dc2_current;
|
||||
|
||||
solaxX1_QueryLiveData();
|
||||
}
|
||||
} // End data Ready
|
||||
|
||||
if (0 == solaxX1_send_retry && 255 != solaxX1_nodata_count) {
|
||||
solaxX1_send_retry = 3;
|
||||
solaxX1_QueryLiveData();
|
||||
}
|
||||
|
||||
// While the inverter has not stable ambient light, will send an address adquired but go offline again,
|
||||
// so no data will be received when the query is send, then we start the countdown to set the inverter as offline again.
|
||||
if (255 == solaxX1_nodata_count) {
|
||||
solaxX1_nodata_count = 0;
|
||||
solaxX1_send_retry = 3;
|
||||
}
|
||||
} // end hasAddress && (data_ready || solaxX1_send_retry == 0)
|
||||
else
|
||||
{
|
||||
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: No Data count: %d"), solaxX1_nodata_count);
|
||||
|
||||
if (solaxX1_nodata_count < 10) // max. seconds without data
|
||||
{
|
||||
solaxX1_nodata_count++;
|
||||
}
|
||||
else if (255 != solaxX1_nodata_count)
|
||||
{
|
||||
// no data from RS485, reset values to 0 and set inverter as offline
|
||||
solaxX1_nodata_count = 255;
|
||||
solaxX1_send_retry = 3;
|
||||
protocolStatus.status = 0b00001000; // queryOffline
|
||||
|
||||
solaxX1.temperature = solaxX1.dc1_voltage = solaxX1.dc2_voltage = solaxX1.dc1_current = solaxX1.dc2_current = solaxX1.ac_current = 0;
|
||||
solaxX1.ac_voltage = solaxX1.frequency = solaxX1.power = solaxX1.dc1_power = solaxX1.dc2_power = solaxX1.status = 0;
|
||||
//solaxX1.energy_today = solaxX1.energy_total = solaxX1.runtime_total = 0;
|
||||
}
|
||||
}
|
||||
|
||||
if (!protocolStatus.hasAddress && (data_ready || solaxX1_send_retry == 0))
|
||||
{
|
||||
if (data_ready)
|
||||
{
|
||||
// check address confirmation from inverter
|
||||
if (protocolStatus.inverterAddressSend)
|
||||
{
|
||||
uint8_t error = solaxX1_RS485Receive(value);
|
||||
if (error)
|
||||
{
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: Address confirmation response CRC error"));
|
||||
}
|
||||
else
|
||||
{
|
||||
if (value[6] == 0x10 && value[7] == 0x81 && value[9] == 0x06)
|
||||
{
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: Set hasAddress"));
|
||||
protocolStatus.status = 0b00100000; // hasAddress
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Check inverter serial number and send the set address request
|
||||
if (protocolStatus.queryOfflineSend)
|
||||
{
|
||||
uint8_t error = solaxX1_RS485Receive(value);
|
||||
if (error)
|
||||
{
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: Query Offline response CRC error"));
|
||||
}
|
||||
else
|
||||
{
|
||||
// Serial number from query response
|
||||
if (value[6] == 0x10 && value[7] == 0x80 && protocolStatus.inverterSnReceived == false)
|
||||
{
|
||||
for (uint8_t i = 9; i <= 22; i++)
|
||||
{
|
||||
data[i - 9] = value[i];
|
||||
}
|
||||
solaxX1_SendInverterAddress();
|
||||
protocolStatus.status = 0b1100000; // inverterSnReceived and inverterAddressSend
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: Set inverterSnReceived and inverterAddressSend"));
|
||||
}
|
||||
}
|
||||
}
|
||||
} // End data ready
|
||||
|
||||
if (solaxX1_send_retry == 0)
|
||||
{
|
||||
if (protocolStatus.queryOfflineSend)
|
||||
{
|
||||
protocolStatus.status = 0b00001000; // queryOffline
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: Set Query Offline"));
|
||||
}
|
||||
solaxX1_send_retry = 3;
|
||||
}
|
||||
|
||||
// request to the inverter the serial number if offline
|
||||
if (protocolStatus.queryOffline)
|
||||
{
|
||||
// We sent the message to query inverters in offline status
|
||||
source[0] = 0x01;
|
||||
destination[1] = 0x00;
|
||||
controlCode[0] = 0x10;
|
||||
functionCode[0] = 0x00;
|
||||
dataLength[0] = 0x00;
|
||||
solaxX1_RS485Send(9);
|
||||
protocolStatus.status = 0b00010000; // queryOfflineSend
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: Query Offline Send"));
|
||||
}
|
||||
} // end !hasAddress && (data_ready || solaxX1_send_retry == 0)
|
||||
|
||||
if (!data_ready)
|
||||
solaxX1_send_retry--;
|
||||
}
|
||||
|
||||
void solaxX1Init(void)
|
||||
{
|
||||
AddLog_P(LOG_LEVEL_DEBUG, PSTR("Solax X1 Inverter Init"));
|
||||
DEBUG_SENSOR_LOG(PSTR("SX1: RX pin: %d, TX pin: %d"), pin[GPIO_SOLAXX1_RX], pin[GPIO_SOLAXX1_TX]);
|
||||
solaxX1_Init = 0;
|
||||
protocolStatus.status = 0b00100000; // hasAddress
|
||||
|
||||
if ((pin[GPIO_SOLAXX1_RX] < 99) && (pin[GPIO_SOLAXX1_TX] < 99))
|
||||
{
|
||||
solaxX1Serial = new TasmotaSerial(pin[GPIO_SOLAXX1_RX], pin[GPIO_SOLAXX1_TX], 1);
|
||||
if (solaxX1Serial->begin(SOLAXX1_SPEED))
|
||||
{
|
||||
if (solaxX1Serial->hardwareSerial())
|
||||
{
|
||||
ClaimSerial();
|
||||
}
|
||||
solaxX1_Init = 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef USE_WEBSERVER
|
||||
const char HTTP_SNS_solaxX1_DATA1[] PROGMEM =
|
||||
"{s}" D_SOLAX_X1 " " D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_FREQUENCY "{m}%s " D_UNIT_HERTZ "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_INVERTER_POWER "{m}%s " D_UNIT_WATT "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_SOLAR_POWER "{m}%s " D_UNIT_WATT "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_ENERGY_TOTAL "{m}%s " D_UNIT_KILOWATTHOUR "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_ENERGY_TODAY "{m}%s " D_UNIT_KILOWATTHOUR "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_PV1_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_PV1_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_PV1_POWER "{m}%s " D_UNIT_WATT "{e}";
|
||||
#ifdef SOLAXX1_PV2
|
||||
const char HTTP_SNS_solaxX1_DATA2[] PROGMEM =
|
||||
"{s}" D_SOLAX_X1 " " D_PV2_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_PV2_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_PV2_POWER "{m}%s " D_UNIT_WATT "{e}";
|
||||
#endif
|
||||
const char HTTP_SNS_solaxX1_DATA3[] PROGMEM =
|
||||
"{s}" D_SOLAX_X1 " " D_UPTIME "{m}%s " D_UNIT_HOUR "{e}"
|
||||
"{s}" D_SOLAX_X1 " " D_STATUS "{m}%s"
|
||||
"{s}" D_SOLAX_X1 " " D_ERROR "{m}%s";
|
||||
#endif // USE_WEBSERVER
|
||||
|
||||
void solaxX1Show(bool json)
|
||||
{
|
||||
char voltage[33];
|
||||
dtostrfd(solaxX1.ac_voltage, Settings.flag2.voltage_resolution, voltage);
|
||||
char current[33];
|
||||
dtostrfd(solaxX1.ac_current, Settings.flag2.current_resolution, current);
|
||||
char inverter_power[33];
|
||||
dtostrfd(solaxX1.power, Settings.flag2.wattage_resolution, inverter_power);
|
||||
char solar_power[33];
|
||||
dtostrfd(solaxX1.dc1_power + solaxX1.dc2_power, Settings.flag2.wattage_resolution, solar_power);
|
||||
char frequency[33];
|
||||
dtostrfd(solaxX1.frequency, Settings.flag2.frequency_resolution, frequency);
|
||||
char energy_total[33];
|
||||
dtostrfd(solaxX1.energy_total, Settings.flag2.energy_resolution, energy_total);
|
||||
char energy_today[33];
|
||||
dtostrfd(solaxX1.energy_today, Settings.flag2.energy_resolution, energy_today);
|
||||
char pv1_voltage[33];
|
||||
dtostrfd(solaxX1.dc1_voltage, Settings.flag2.voltage_resolution, pv1_voltage);
|
||||
char pv1_current[33];
|
||||
dtostrfd(solaxX1.dc1_current, Settings.flag2.current_resolution, pv1_current);
|
||||
char pv1_power[33];
|
||||
dtostrfd(solaxX1.dc1_power, Settings.flag2.wattage_resolution, pv1_power);
|
||||
#ifdef SOLAXX1_PV2
|
||||
char pv2_voltage[33];
|
||||
dtostrfd(solaxX1.dc2_voltage, Settings.flag2.voltage_resolution, pv2_voltage);
|
||||
char pv2_current[33];
|
||||
dtostrfd(solaxX1.dc2_current, Settings.flag2.current_resolution, pv2_current);
|
||||
char pv2_power[33];
|
||||
dtostrfd(solaxX1.dc2_power, Settings.flag2.wattage_resolution, pv2_power);
|
||||
#endif
|
||||
char temperature[33];
|
||||
dtostrfd(solaxX1.temperature, Settings.flag2.temperature_resolution, temperature);
|
||||
char runtime[33];
|
||||
dtostrfd(solaxX1.runtime_total, 0, runtime);
|
||||
char status[33];
|
||||
GetTextIndexed(status, sizeof(status), solaxX1.status, kSolaxMode);
|
||||
|
||||
if (json)
|
||||
{
|
||||
ResponseAppend_P(PSTR(",\"" D_RSLT_ENERGY "\":{\"" D_JSON_VOLTAGE "\":%s,\"" D_JSON_CURRENT "\":%s,\"" D_JSON_ACTIVE_POWERUSAGE "\":%s,\""
|
||||
D_JSON_SOLAR_POWER "\":%s,\"" D_JSON_FREQUENCY "\":%s,\"" D_JSON_TOTAL "\":%s,\"" D_JSON_TODAY "\":%s,\""
|
||||
D_JSON_PV1_VOLTAGE "\":%s,\"" D_JSON_PV1_CURRENT "\":%s,\"" D_JSON_PV1_POWER "\":%s"),
|
||||
voltage, current, inverter_power,
|
||||
solar_power, frequency, energy_total, energy_today,
|
||||
pv1_voltage, pv1_current, pv1_power);
|
||||
#ifdef SOLAXX1_PV2
|
||||
ResponseAppend_P(PSTR(",\"" D_JSON_PV2_VOLTAGE "\":%s,\"" D_JSON_PV2_CURRENT "\":%s,\"" D_JSON_PV2_POWER "\":%s"),
|
||||
pv2_voltage, pv2_current, pv2_power);
|
||||
#endif
|
||||
ResponseAppend_P(PSTR(",\"" D_JSON_TEMPERATURE "\":%s,\"" D_JSON_RUNTIME "\":%s,\"" D_JSON_STATUS "\":\"%s\",\"" D_JSON_ERROR "\":%d}"),
|
||||
temperature, runtime, status, solaxX1.errorCode);
|
||||
|
||||
|
||||
#ifdef USE_DOMOTICZ
|
||||
if (0 == tele_period)
|
||||
{
|
||||
char energy_total_chr[33];
|
||||
dtostrfd(solaxX1.energy_total * 1000, 1, energy_total_chr);
|
||||
|
||||
DomoticzSensor(DZ_VOLTAGE, voltage);
|
||||
DomoticzSensor(DZ_CURRENT, current);
|
||||
// Only do the updates if the values are greater than 0, to avoid wrong data representation in domoticz
|
||||
if (solaxX1.temperature > 0) DomoticzSensor(DZ_TEMP, temperature);
|
||||
if (solaxX1.energy_total > 0) DomoticzSensorPowerEnergy((int)solaxX1.power, energy_total_chr);
|
||||
}
|
||||
#endif // USE_DOMOTICZ
|
||||
#ifdef USE_WEBSERVER
|
||||
}
|
||||
else
|
||||
{
|
||||
WSContentSend_PD(HTTP_SNS_solaxX1_DATA1, voltage, current, frequency, inverter_power, solar_power, energy_total, energy_today, pv1_voltage, pv1_current, pv1_power);
|
||||
#ifdef SOLAXX1_PV2
|
||||
WSContentSend_PD(HTTP_SNS_solaxX1_DATA2, pv2_voltage, pv2_current, pv2_power);
|
||||
#endif
|
||||
WSContentSend_PD(HTTP_SNS_TEMP, D_SOLAX_X1, temperature, TempUnit());
|
||||
char errorCodeString[33];
|
||||
WSContentSend_PD(HTTP_SNS_solaxX1_DATA3, runtime, status,
|
||||
GetTextIndexed(errorCodeString, sizeof(errorCodeString), solaxX1_ParseErrorCode(solaxX1.errorCode), kSolaxError));
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Interface
|
||||
\*********************************************************************************************/
|
||||
|
||||
bool Xsns49(uint8_t function)
|
||||
{
|
||||
bool result = false;
|
||||
|
||||
if (solaxX1_Init)
|
||||
{
|
||||
switch (function)
|
||||
{
|
||||
case FUNC_INIT:
|
||||
solaxX1Init();
|
||||
break;
|
||||
case FUNC_EVERY_SECOND:
|
||||
if (uptime > 4) { solaxX1EverySecond(); }
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
solaxX1Show(1);
|
||||
break;
|
||||
#ifdef USE_WEBSERVER
|
||||
case FUNC_WEB_SENSOR:
|
||||
solaxX1Show(0);
|
||||
break;
|
||||
#endif // USE_WEBSERVER
|
||||
}
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
#endif // USE_SOLAX_X1
|
||||
Loading…
Reference in New Issue