Add command ``DeviceName``

Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI

RELEASENOTES.md

@@ -52,9 +52,10 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 
 ## Changelog
 
-### Version 8.3.0.1
+### Version 8.3.0.2
 
 - Change KNX pow function to approximative pow saving 5k of code space
 - Change Mutichannel Gas sensor pow function to approximative pow saving 5k of code space
 - Change Quick Power Cycle detection from 4 to 7 power interrupts (#4066)
 - Fix default state of ``SetOption73 0`` for button decoupling and send multi-press and hold MQTT messages
+- Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI

tasmota/CHANGELOG.md

@@ -1,5 +1,9 @@
 ## Unreleased (development)
 
+### 8.3.0.2 20200517
+
+- Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
+
 ### 8.3.0.1 20200514
 
 - Change KNX pow function to approximative pow saving 5k of code space

tasmota/i18n.h

@@ -276,6 +276,7 @@
   #define D_WCFG_5_WAIT "Wait"
   #define D_WCFG_6_SERIAL "Serial"
   #define D_WCFG_7_WIFIMANAGER_RESET_ONLY "ManagerRst"
+#define D_CMND_DEVICENAME "DeviceName"
 #define D_CMND_FRIENDLYNAME "FriendlyName"
 #define D_CMND_SWITCHMODE "SwitchMode"
 #define D_CMND_INTERLOCK "Interlock"

tasmota/language/bg_BG.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Други параметри"
 #define D_TEMPLATE "Модел"
 #define D_ACTIVATE "Активирай"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Парола на уеб администратора"
 #define D_MQTT_ENABLE "Активиране на MQTT"
 #define D_FRIENDLY_NAME "Приятелско име"

tasmota/language/cs_CZ.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Další nastavení"
 #define D_TEMPLATE "Šablona"
 #define D_ACTIVATE "Aktivovat"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Heslo Web administrátora"
 #define D_MQTT_ENABLE "MQTT aktivní"
 #define D_FRIENDLY_NAME "Friendly Name"

tasmota/language/de_DE.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Sonstige Einstellungen"
 #define D_TEMPLATE "Vorlage"
 #define D_ACTIVATE "Aktivieren"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Passwort für Web Oberfläche"
 #define D_MQTT_ENABLE "MQTT aktivieren"
 #define D_FRIENDLY_NAME "Name [friendly name]"

tasmota/language/el_GR.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Άλλες παράμετροι"
 #define D_TEMPLATE "Πρότυπο"
 #define D_ACTIVATE "Ενεργοποίηση"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Κωδικός διαχειριστή"
 #define D_MQTT_ENABLE "Ενεργοποίηση MQTT"
 #define D_FRIENDLY_NAME "Φιλική ονομασία"

tasmota/language/en_GB.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Other parameters"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Web Admin Password"
 #define D_MQTT_ENABLE "MQTT enable"
 #define D_FRIENDLY_NAME "Friendly Name"

tasmota/language/es_ES.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Otros parámetros"
 #define D_TEMPLATE "Plantilla"
 #define D_ACTIVATE "Activar"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Clave Administrador Web"
 #define D_MQTT_ENABLE "Habilitar MQTT"
 #define D_FRIENDLY_NAME "Nombre Amigable"

tasmota/language/fr_FR.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Autres paramètres"
 #define D_TEMPLATE "Modèle"
 #define D_ACTIVATE "Activer"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Mot de passe Web Admin"
 #define D_MQTT_ENABLE "MQTT activé"
 #define D_FRIENDLY_NAME "Surnom"

tasmota/language/he_HE.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "פרמטרים שונים"
 #define D_TEMPLATE "תבנית"
 #define D_ACTIVATE "הפעל"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "סיסמת מנהל"
 #define D_MQTT_ENABLE "MQTT אפשר"
 #define D_FRIENDLY_NAME "שם ידידותי"

tasmota/language/hu_HU.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Egyéb beállítások"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Web admin jelszó"
 #define D_MQTT_ENABLE "MQTT engedélyezése"
 #define D_FRIENDLY_NAME "Név"

tasmota/language/it_IT.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Altri parametri"
 #define D_TEMPLATE "Modello"
 #define D_ACTIVATE "Attiva"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Password amministratore web"
 #define D_MQTT_ENABLE "Abilita MQTT"
 #define D_FRIENDLY_NAME "Nome amichevole"

tasmota/language/ko_KO.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "기타 설정"
 #define D_TEMPLATE "템플릿"
 #define D_ACTIVATE "활성화"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Web Admin 비밀번호"
 #define D_MQTT_ENABLE "MQTT 사용"
 #define D_FRIENDLY_NAME "Friendly Name"

tasmota/language/nl_NL.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Overige parameters"
 #define D_TEMPLATE "Sjabloon"
 #define D_ACTIVATE "Activeer"
+#define D_DEVICE_NAME "Apparaatnaam"
 #define D_WEB_ADMIN_PASSWORD "Web Admin Wachtwoord"
 #define D_MQTT_ENABLE "MQTT ingeschakeld"
 #define D_FRIENDLY_NAME "Beschrijvende naam"

tasmota/language/pl_PL.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Inne parametry"
 #define D_TEMPLATE "Szablon"
 #define D_ACTIVATE "Aktywuj"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Hasło administratora"
 #define D_MQTT_ENABLE "Załącz MQTT"
 #define D_FRIENDLY_NAME "Nazwa"

tasmota/language/pt_BR.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Outros parâmetros"
 #define D_TEMPLATE "Modelo"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Senha de WEB Admin"
 #define D_MQTT_ENABLE "MQTT habilitado"
 #define D_FRIENDLY_NAME "Nome amigável"

tasmota/language/pt_PT.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Outros parametros"
 #define D_TEMPLATE "Modelo"
 #define D_ACTIVATE "Ativar"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Palavra Chave do Admin WEB"
 #define D_MQTT_ENABLE "MQTT habilitado"
 #define D_FRIENDLY_NAME "Nome amigável"

tasmota/language/ro_RO.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Alți paramatri"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activare"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Parolă Web Admin"
 #define D_MQTT_ENABLE "Activare MQTT"
 #define D_FRIENDLY_NAME "Friendly Name"

tasmota/language/ru_RU.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Параметры Прочие"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Пароль Web администратора"
 #define D_MQTT_ENABLE "MQTT активен"
 #define D_FRIENDLY_NAME "Дружественное Имя"

tasmota/language/sk_SK.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Ostatné nastavenia"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Heslo Web administrátora"
 #define D_MQTT_ENABLE "MQTT aktívne"
 #define D_FRIENDLY_NAME "Friendly Name"

tasmota/language/sv_SE.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Andra parametrar"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Webbadmin-lösenord"
 #define D_MQTT_ENABLE "MQTT aktivera"
 #define D_FRIENDLY_NAME "Läsbart namn"

tasmota/language/tr_TR.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Diğer parametreler"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Web Yönetici Şifresi"
 #define D_MQTT_ENABLE "MQTT aktif"
 #define D_FRIENDLY_NAME "Kullanıcı Dostu İsim"

tasmota/language/uk_UA.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "Параметри Інше"
 #define D_TEMPLATE "Шаблони"
 #define D_ACTIVATE "Активований"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "Гасло адміністратора Web"
 #define D_MQTT_ENABLE "MQTT активний"
 #define D_FRIENDLY_NAME "Дружня назва"

tasmota/language/zh_CN.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "其他设置"
 #define D_TEMPLATE "模板"
 #define D_ACTIVATE "启用"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "WEB 管理密码"
 #define D_MQTT_ENABLE "启用MQTT"
 #define D_FRIENDLY_NAME "昵称"

tasmota/language/zh_TW.h

@@ -302,6 +302,7 @@
 #define D_OTHER_PARAMETERS "其他設置"
 #define D_TEMPLATE "Template"
 #define D_ACTIVATE "Activate"
+#define D_DEVICE_NAME "Device Name"
 #define D_WEB_ADMIN_PASSWORD "WEB管理密碼"
 #define D_MQTT_ENABLE "啟用MQTT"
 #define D_FRIENDLY_NAME "昵稱"

tasmota/settings.ino

@@ -754,6 +754,7 @@ void SettingsDefaultSet2(void)
   SettingsUpdateText(SET_FRIENDLYNAME2, PSTR(FRIENDLY_NAME"2"));
   SettingsUpdateText(SET_FRIENDLYNAME3, PSTR(FRIENDLY_NAME"3"));
   SettingsUpdateText(SET_FRIENDLYNAME4, PSTR(FRIENDLY_NAME"4"));
+  SettingsUpdateText(SET_DEVICENAME, SettingsText(SET_FRIENDLYNAME1));
   SettingsUpdateText(SET_OTAURL, PSTR(OTA_URL));
 
   // Power
@@ -1411,6 +1412,10 @@ void SettingsDelta(void)
       if (Settings.rules[2][0] == 0) { Settings.rules[2][1] = 0; }
     }
 
+    if (Settings.version < 0x08030002) {
+      SettingsUpdateText(SET_DEVICENAME, SettingsText(SET_FRIENDLYNAME1));
+    }
+
     Settings.version = VERSION;
     SettingsSave(1);
   }

tasmota/support_command.ino

@@ -25,7 +25,7 @@ const char kTasmotaCommands[] PROGMEM = "|"  // No prefix
   D_CMND_MODULE "|" D_CMND_MODULES "|" D_CMND_GPIO "|" D_CMND_GPIOS "|" D_CMND_TEMPLATE "|" D_CMND_PWM "|" D_CMND_PWMFREQUENCY "|" D_CMND_PWMRANGE "|"
   D_CMND_BUTTONDEBOUNCE "|" D_CMND_SWITCHDEBOUNCE "|" D_CMND_SYSLOG "|" D_CMND_LOGHOST "|" D_CMND_LOGPORT "|" D_CMND_SERIALSEND "|" D_CMND_BAUDRATE "|" D_CMND_SERIALCONFIG "|"
   D_CMND_SERIALDELIMITER "|" D_CMND_IPADDRESS "|" D_CMND_NTPSERVER "|" D_CMND_AP "|" D_CMND_SSID "|" D_CMND_PASSWORD "|" D_CMND_HOSTNAME "|" D_CMND_WIFICONFIG "|"
-  D_CMND_FRIENDLYNAME "|" D_CMND_SWITCHMODE "|" D_CMND_INTERLOCK "|" D_CMND_TELEPERIOD "|" D_CMND_RESET "|" D_CMND_TIME "|" D_CMND_TIMEZONE "|" D_CMND_TIMESTD "|"
+  D_CMND_DEVICENAME "|" D_CMND_FRIENDLYNAME "|" D_CMND_SWITCHMODE "|" D_CMND_INTERLOCK "|" D_CMND_TELEPERIOD "|" D_CMND_RESET "|" D_CMND_TIME "|" D_CMND_TIMEZONE "|" D_CMND_TIMESTD "|"
   D_CMND_TIMEDST "|" D_CMND_ALTITUDE "|" D_CMND_LEDPOWER "|" D_CMND_LEDSTATE "|" D_CMND_LEDMASK "|" D_CMND_WIFIPOWER "|" D_CMND_TEMPOFFSET "|" D_CMND_HUMOFFSET "|"
   D_CMND_SPEEDUNIT "|" D_CMND_GLOBAL_TEMP "|" D_CMND_GLOBAL_HUM "|"
 #ifdef USE_I2C
@@ -48,7 +48,7 @@ void (* const TasmotaCommand[])(void) PROGMEM = {
   &CmndModule, &CmndModules, &CmndGpio, &CmndGpios, &CmndTemplate, &CmndPwm, &CmndPwmfrequency, &CmndPwmrange,
   &CmndButtonDebounce, &CmndSwitchDebounce, &CmndSyslog, &CmndLoghost, &CmndLogport, &CmndSerialSend, &CmndBaudrate, &CmndSerialConfig,
   &CmndSerialDelimiter, &CmndIpAddress, &CmndNtpServer, &CmndAp, &CmndSsid, &CmndPassword, &CmndHostname, &CmndWifiConfig,
-  &CmndFriendlyname, &CmndSwitchMode, &CmndInterlock, &CmndTeleperiod, &CmndReset, &CmndTime, &CmndTimezone, &CmndTimeStd,
+  &CmndDevicename, &CmndFriendlyname, &CmndSwitchMode, &CmndInterlock, &CmndTeleperiod, &CmndReset, &CmndTime, &CmndTimezone, &CmndTimeStd,
   &CmndTimeDst, &CmndAltitude, &CmndLedPower, &CmndLedState, &CmndLedMask, &CmndWifiPower, &CmndTempOffset, &CmndHumOffset,
   &CmndSpeedUnit, &CmndGlobalTemp, &CmndGlobalHum,
 #ifdef USE_I2C
@@ -395,11 +395,11 @@ void CmndStatus(void)
     for (uint32_t i = 0; i < MAX_SWITCHES; i++) {
       snprintf_P(stemp2, sizeof(stemp2), PSTR("%s%s%d" ), stemp2, (i > 0 ? "," : ""), Settings.switchmode[i]);
     }
-    Response_P(PSTR("{\"" D_CMND_STATUS "\":{\"" D_CMND_MODULE "\":%d,\"" D_CMND_FRIENDLYNAME "\":[%s],\"" D_CMND_TOPIC "\":\"%s\",\""
+    Response_P(PSTR("{\"" D_CMND_STATUS "\":{\"" D_CMND_MODULE "\":%d,\"" D_CMND_DEVICENAME "\":\"%s\",\"" D_CMND_FRIENDLYNAME "\":[%s],\"" D_CMND_TOPIC "\":\"%s\",\""
                           D_CMND_BUTTONTOPIC "\":\"%s\",\"" D_CMND_POWER "\":%d,\"" D_CMND_POWERONSTATE "\":%d,\"" D_CMND_LEDSTATE "\":%d,\""
                           D_CMND_LEDMASK "\":\"%04X\",\"" D_CMND_SAVEDATA "\":%d,\"" D_JSON_SAVESTATE "\":%d,\"" D_CMND_SWITCHTOPIC "\":\"%s\",\""
                           D_CMND_SWITCHMODE "\":[%s],\"" D_CMND_BUTTONRETAIN "\":%d,\"" D_CMND_SWITCHRETAIN "\":%d,\"" D_CMND_SENSORRETAIN "\":%d,\"" D_CMND_POWERRETAIN "\":%d}}"),
-                          ModuleNr(), stemp, mqtt_topic,
+                          ModuleNr(), SettingsText(SET_DEVICENAME), stemp, mqtt_topic,
                           SettingsText(SET_MQTT_BUTTON_TOPIC), power, Settings.poweronstate, Settings.ledstate,
                           Settings.ledmask, Settings.save_data,
                           Settings.flag.save_state,           // SetOption0 - Save power state and use after restart
@@ -1488,6 +1488,14 @@ void CmndWifiConfig(void)
   Response_P(S_JSON_COMMAND_NVALUE_SVALUE, XdrvMailbox.command, Settings.sta_config, GetTextIndexed(stemp1, sizeof(stemp1), Settings.sta_config, kWifiConfig));
 }
 
+void CmndDevicename(void)
+{
+  if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0)) {
+    SettingsUpdateText(SET_DEVICENAME, (SC_DEFAULT == Shortcut()) ? SettingsText(SET_FRIENDLYNAME1) : XdrvMailbox.data);
+  }
+  ResponseCmndChar(SettingsText(SET_DEVICENAME));
+}
+
 void CmndFriendlyname(void)
 {
   if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_FRIENDLYNAMES)) {

tasmota/tasmota.h

@@ -292,6 +292,7 @@ enum SettingsTextIndex { SET_OTAURL,
                          SET_MQTT_GRP_TOPIC2, SET_MQTT_GRP_TOPIC3, SET_MQTT_GRP_TOPIC4,
                          SET_TEMPLATE_NAME,
                          SET_DEV_GROUP_NAME1, SET_DEV_GROUP_NAME2, SET_DEV_GROUP_NAME3, SET_DEV_GROUP_NAME4,
+                         SET_DEVICENAME,
                          SET_MAX };
 
 enum DevGroupMessageType { DGR_MSGTYP_FULL_STATUS, DGR_MSGTYP_PARTIAL_UPDATE, DGR_MSGTYP_UPDATE, DGR_MSGTYP_UPDATE_MORE_TO_COME, DGR_MSGTYP_UPDATE_DIRECT, DGR_MSGTYPE_UPDATE_COMMAND };

tasmota/tasmota.ino

@@ -307,7 +307,7 @@ void setup(void) {
 
   SetPowerOnState();
 
-  AddLog_P2(LOG_LEVEL_INFO, PSTR(D_PROJECT " %s %s " D_VERSION " %s%s-" ARDUINO_CORE_RELEASE), PROJECT, SettingsText(SET_FRIENDLYNAME1), my_version, my_image);
+  AddLog_P2(LOG_LEVEL_INFO, PSTR(D_PROJECT " %s %s " D_VERSION " %s%s-" ARDUINO_CORE_RELEASE), PROJECT, SettingsText(SET_DEVICENAME), my_version, my_image);
 #ifdef FIRMWARE_MINIMAL
   AddLog_P2(LOG_LEVEL_INFO, PSTR(D_WARNING_MINIMAL_VERSION));
 #endif  // FIRMWARE_MINIMAL

tasmota/tasmota_version.h

@@ -20,7 +20,7 @@
 #ifndef _TASMOTA_VERSION_H_
 #define _TASMOTA_VERSION_H_
 
-const uint32_t VERSION = 0x08030001;
+const uint32_t VERSION = 0x08030002;
 
 // Lowest compatible version
 const uint32_t VERSION_COMPATIBLE = 0x07010006;

tasmota/xdrv_01_webserver.ino

@@ -455,6 +455,8 @@ const char HTTP_FORM_OTHER[] PROGMEM =
   "<label><b>" D_WEB_ADMIN_PASSWORD "</b><input type='checkbox' onclick='sp(\"wp\")'></label><br><input id='wp' type='password' placeholder='" D_WEB_ADMIN_PASSWORD "' value='" D_ASTERISK_PWD "'><br>"
   "<br>"
   "<label><input id='b1' type='checkbox'%s><b>" D_MQTT_ENABLE "</b></label><br>"
+  "<br>"
+  "<label><b>" D_DEVICE_NAME "</b> (%s)</label><br><input id='dn' placeholder='%s' value='%s'><br>"
   "<br>";
 
 const char HTTP_FORM_END[] PROGMEM =
@@ -849,7 +851,7 @@ void WSContentStart_P(const char* title, bool auth)
   WSContentBegin(200, CT_HTML);
 
   if (title != nullptr) {
-    WSContentSend_P(HTTP_HEADER1, SettingsText(SET_FRIENDLYNAME1), title);
+    WSContentSend_P(HTTP_HEADER1, SettingsText(SET_DEVICENAME), title);
   }
 }
 
@@ -893,7 +895,7 @@ void WSContentSendStyle_P(const char* formatP, ...)
     WebColor(COL_TEXT_WARNING),
 #endif
     WebColor(COL_TITLE),
-    ModuleName().c_str(), SettingsText(SET_FRIENDLYNAME1));
+    ModuleName().c_str(), SettingsText(SET_DEVICENAME));
   if (Settings.flag3.gui_hostname_ip) {                // SetOption53 - Show hostanme and IP address in GUI main menu
     bool lip = (static_cast<uint32_t>(WiFi.localIP()) != 0);
     bool sip = (static_cast<uint32_t>(WiFi.softAPIP()) != 0);
@@ -1992,7 +1994,9 @@ void HandleOtherConfiguration(void)
   TemplateJson();
   char stemp[strlen(mqtt_data) +1];
   strlcpy(stemp, mqtt_data, sizeof(stemp));  // Get JSON template
-  WSContentSend_P(HTTP_FORM_OTHER, stemp, (USER_MODULE == Settings.module) ? " checked disabled" : "", (Settings.flag.mqtt_enabled) ? " checked" : "");  // SetOption3 - Enable MQTT
+  WSContentSend_P(HTTP_FORM_OTHER, stemp, (USER_MODULE == Settings.module) ? " checked disabled" : "",
+    (Settings.flag.mqtt_enabled) ? " checked" : "",   // SetOption3 - Enable MQTT
+    SettingsText(SET_FRIENDLYNAME1), SettingsText(SET_DEVICENAME), SettingsText(SET_DEVICENAME));
 
   uint32_t maxfn = (devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : (!devices_present) ? 1 : devices_present;
 #ifdef USE_SONOFF_IFAN
@@ -2042,6 +2046,9 @@ void OtherSaveSettings(void)
   char friendlyname[TOPSZ];
   char message[LOGSZ];
 
+  WebGetArg("dn", tmp, sizeof(tmp));
+  SettingsUpdateText(SET_DEVICENAME, (!strlen(tmp)) ? SettingsText(SET_FRIENDLYNAME1) : tmp);
+
   WebGetArg("wp", tmp, sizeof(tmp));
   SettingsUpdateText(SET_WEBPWD, (!strlen(tmp)) ? "" : (strchr(tmp,'*')) ? SettingsText(SET_WEBPWD) : tmp);
   Settings.flag.mqtt_enabled = Webserver->hasArg("b1");  // SetOption3 - Enable MQTT
@@ -2053,7 +2060,8 @@ void OtherSaveSettings(void)
 #endif  // USE_EMULATION_WEMO || USE_EMULATION_HUE
 #endif  // USE_EMULATION
 
-  snprintf_P(message, sizeof(message), PSTR(D_LOG_OTHER D_MQTT_ENABLE " %s, " D_CMND_EMULATION " %d, " D_CMND_FRIENDLYNAME), GetStateText(Settings.flag.mqtt_enabled), Settings.flag2.emulation);
+  snprintf_P(message, sizeof(message), PSTR(D_LOG_OTHER D_MQTT_ENABLE " %s, " D_CMND_EMULATION " %d, " D_CMND_DEVICENAME " %s, " D_CMND_FRIENDLYNAME),
+    GetStateText(Settings.flag.mqtt_enabled), Settings.flag2.emulation, SettingsText(SET_DEVICENAME));
   for (uint32_t i = 0; i < MAX_FRIENDLYNAMES; i++) {
     snprintf_P(webindex, sizeof(webindex), PSTR("a%d"), i);
     WebGetArg(webindex, tmp, sizeof(tmp));