Add Domoticz Selector for Fanspeed

Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)

sonoff/_changelog.ino

@@ -3,6 +3,7 @@
  * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497)
  * Update SR-04 driver to use NewPing library (#4488)
  * Add support for GPIO02 for newer Sonoff Basic (#4518)
+ * Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)
  *
  * 6.3.0.14 20181127
  * Add Command CalcRes to set number of decimals (0 - 7) used in commands ADD, SUB, MULT and SCALE (#4420)

sonoff/sonoff.h

@@ -74,6 +74,8 @@ typedef unsigned long power_t;              // Power (Relay) type
 #define MAX_RULE_TIMERS        8            // Max number of rule timers (4 bytes / timer)
 #define MAX_RULE_VARS          5            // Max number of rule variables (10 bytes / variable)
 
+#define MAX_FAN_SPEED          4            // Max number of iFan02 fan speeds (0 .. 3)
+
 #define MQTT_TOKEN_PREFIX      "%prefix%"   // To be substituted by mqtt_prefix[x]
 #define MQTT_TOKEN_TOPIC       "%topic%"    // To be substituted by mqtt_topic, mqtt_grptopic, mqtt_buttontopic, mqtt_switchtopic
 #define MQTT_TOKEN_HOSTNAME    "%hostname%" // To be substituted by mqtt_topic, mqtt_grptopic, mqtt_buttontopic, mqtt_switchtopic
@@ -245,12 +247,14 @@ enum XsnsFunctions {FUNC_SETTINGS_OVERRIDE, FUNC_MODULE_INIT, FUNC_PRE_INIT, FUN
                     FUNC_RULES_PROCESS, FUNC_SERIAL, FUNC_FREE_MEM, FUNC_BUTTON_PRESSED,
                     FUNC_WEB_ADD_BUTTON, FUNC_WEB_ADD_MAIN_BUTTON, FUNC_WEB_ADD_HANDLER};
 
-const uint8_t kDefaultRfCode[9] PROGMEM = { 0x21, 0x16, 0x01, 0x0E, 0x03, 0x48, 0x2E, 0x1A, 0x00 };
-
 enum CommandSource { SRC_IGNORE, SRC_MQTT, SRC_RESTART, SRC_BUTTON, SRC_SWITCH, SRC_BACKLOG, SRC_SERIAL, SRC_WEBGUI, SRC_WEBCOMMAND, SRC_WEBCONSOLE, SRC_PULSETIMER,
                      SRC_TIMER, SRC_RULE, SRC_MAXPOWER, SRC_MAXENERGY, SRC_LIGHT, SRC_KNX, SRC_DISPLAY, SRC_WEMO, SRC_HUE, SRC_RETRY, SRC_MAX };
 const char kCommandSource[] PROGMEM = "I|MQTT|Restart|Button|Switch|Backlog|Serial|WebGui|WebCommand|WebConsole|PulseTimer|Timer|Rule|MaxPower|MaxEnergy|Light|Knx|Display|Wemo|Hue|Retry";
 
+const uint8_t kDefaultRfCode[9] PROGMEM = { 0x21, 0x16, 0x01, 0x0E, 0x03, 0x48, 0x2E, 0x1A, 0x00 };
+
+const uint8_t kIFan02Speed[MAX_FAN_SPEED][3] = {{6,6,6}, {7,6,6}, {7,7,6}, {7,6,7}};  // Do not use PROGMEM as it fails
+
 /*********************************************************************************************\
  * Extern global variables
 \*********************************************************************************************/

sonoff/sonoff.ino

@@ -91,8 +91,6 @@ const char kTasmotaCommands[] PROGMEM =
 
 const char kSleepMode[] PROGMEM = "Dynamic|Normal";
 
-const uint8_t kIFan02Speed[4][3] = {{6,6,6}, {7,6,6}, {7,7,6}, {7,6,7}};
-
 // Global variables
 SerialConfig serial_config = SERIAL_8N1;    // Serial interface configuration 8 data bits, No parity, 1 stop bit
 
@@ -390,7 +388,7 @@ uint8_t GetFanspeed(void)
 
 void SetFanspeed(uint8_t fanspeed)
 {
- for (byte i = 0; i < 3; i++) {
+  for (byte i = 0; i < MAX_FAN_SPEED -1; i++) {
     uint8_t state = kIFan02Speed[fanspeed][i];
 //    uint8_t state = pgm_read_byte(kIFan02Speed +(speed *3) +i);
     ExecuteCommandPower(i +2, state, SRC_IGNORE);  // Use relay 2, 3 and 4
@@ -566,14 +564,14 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
       if (data_len > 0) {
         if ('-' == dataBuf[0]) {
           payload = (int16_t)GetFanspeed() -1;
-          if (payload < 0) { payload = 3; }
+          if (payload < 0) { payload = MAX_FAN_SPEED -1; }
         }
         else if ('+' == dataBuf[0]) {
           payload = GetFanspeed() +1;
-          if (payload > 3) { payload = 0; }
+          if (payload > MAX_FAN_SPEED -1) { payload = 0; }
         }
       }
-      if ((payload >= 0) && (payload <= 3) && (payload != GetFanspeed())) {
+      if ((payload >= 0) && (payload < MAX_FAN_SPEED) && (payload != GetFanspeed())) {
         SetFanspeed(payload);
       }
       snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, GetFanspeed());

sonoff/xdrv_01_webserver.ino

@@ -628,7 +628,7 @@ void HandleRoot(void)
       if (SONOFF_IFAN02 == Settings.module) {
         snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_DEVICE_CONTROL, 36, 1, D_BUTTON_TOGGLE, "");
         page += mqtt_data;
-        for (byte i = 0; i < 4; i++) {
+        for (byte i = 0; i < MAX_FAN_SPEED; i++) {
           snprintf_P(stemp, sizeof(stemp), PSTR("%d"), i);
           snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_DEVICE_CONTROL, 16, i +2, stemp, "");
           page += mqtt_data;

sonoff/xdrv_02_mqtt.ino

@@ -334,7 +334,7 @@ void MqttPublishPowerState(byte device)
   if ((device < 1) || (device > devices_present)) { device = 1; }
 
   if ((SONOFF_IFAN02 == Settings.module) && (device > 1)) {
-    if (GetFanspeed() < 4) {  // 4 occurs when fanspeed is 3 and RC button 2 is pressed
+    if (GetFanspeed() < MAX_FAN_SPEED) {  // 4 occurs when fanspeed is 3 and RC button 2 is pressed
       snprintf_P(scommand, sizeof(scommand), PSTR(D_CMND_FANSPEED));
       GetTopic_P(stopic, STAT, mqtt_topic, (Settings.flag.mqtt_response) ? scommand : S_RSLT_RESULT);
       snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, scommand, GetFanspeed());

sonoff/xdrv_07_domoticz.ino

@@ -73,17 +73,26 @@ int DomoticzRssiQuality(void)
 
 void MqttPublishDomoticzPowerState(byte device)
 {
-  char sdimmer[8];
+  char svalue[8];  // Dimmer or Fanspeed value
 
-  if ((device < 1) || (device > devices_present)) {
+  if (Settings.flag.mqtt_enabled) {
-    device = 1;
+    if ((device < 1) || (device > devices_present)) { device = 1; }
-  }
+    if ((SONOFF_IFAN02 == Settings.module) && Settings.domoticz_relay_idx[1] && (device > 1)) {  // device (relay) 1 handled below
-  if (Settings.flag.mqtt_enabled && Settings.domoticz_relay_idx[device -1]) {
+      if (4 == device) {  // Wait for device (relay) 4 to get valid GetFanspeed
-    snprintf_P(sdimmer, sizeof(sdimmer), PSTR("%d"), Settings.light_dimmer);
+        uint8_t fan_speed = GetFanspeed();
+        snprintf_P(svalue, sizeof(svalue), PSTR("%d"), (int)fan_speed * 10);
         snprintf_P(mqtt_data, sizeof(mqtt_data), DOMOTICZ_MESSAGE,
-      Settings.domoticz_relay_idx[device -1], (power & (1 << (device -1))) ? 1 : 0, (light_type) ? sdimmer : "", DomoticzBatteryQuality(), DomoticzRssiQuality());
+          Settings.domoticz_relay_idx[1], (0 == fan_speed) ? 0 : 2, svalue, DomoticzBatteryQuality(), DomoticzRssiQuality());
         MqttPublish(domoticz_in_topic);
       }
+    }
+    else if (Settings.domoticz_relay_idx[device -1]) {
+      snprintf_P(svalue, sizeof(svalue), PSTR("%d"), Settings.light_dimmer);
+      snprintf_P(mqtt_data, sizeof(mqtt_data), DOMOTICZ_MESSAGE,
+        Settings.domoticz_relay_idx[device -1], (power & (1 << (device -1))) ? 1 : 0, (light_type) ? svalue : "", DomoticzBatteryQuality(), DomoticzRssiQuality());
+      MqttPublish(domoticz_in_topic);
+    }
+  }
 }
 
 void DomoticzUpdatePowerState(byte device)
@@ -182,7 +191,18 @@ boolean DomoticzMqttData(void)
         if (idx == Settings.domoticz_relay_idx[i]) {
           bool iscolordimmer = strcmp_P(domoticz["dtype"],PSTR("Color Switch")) == 0;
           snprintf_P(stemp1, sizeof(stemp1), PSTR("%d"), i +1);
-          if (iscolordimmer && 10 == nvalue) { // Color_SetColor
+          if ((SONOFF_IFAN02 == Settings.module) && (1 == i)) {  // Idx 2 is fanspeed
+            int16_t svalue = 0;
+            if (domoticz.containsKey("svalue1")) {
+              svalue = domoticz["svalue1"];
+            } else {
+              return 1;
+            }
+            snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_FANSPEED));
+            snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), (nvalue == 2) ? svalue / 10 : 0);
+            found = 1;
+          }
+          else if (iscolordimmer && 10 == nvalue) { // Color_SetColor
             JsonObject& color = domoticz["Color"];
             uint16_t level = nvalue = domoticz["svalue1"];
             uint16_t r = color["r"]; r = r * level / 100;
@@ -193,7 +213,8 @@ boolean DomoticzMqttData(void)
             snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_COLOR));
             snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%02x%02x%02x%02x%02x"), r, g, b, cw, ww);
             found = 1;
-          } else if ((!iscolordimmer && 2 == nvalue) || // gswitch_sSetLevel
+          }
+          else if ((!iscolordimmer && 2 == nvalue) || // gswitch_sSetLevel
                    (iscolordimmer && 15 == nvalue)) { // Color_SetBrightnessLevel
             if (domoticz.containsKey("svalue1")) {
               nvalue = domoticz["svalue1"];
@@ -206,7 +227,8 @@ boolean DomoticzMqttData(void)
             snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_DIMMER));
             snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), nvalue);
             found = 1;
-          } else if (1 == nvalue || 0 == nvalue) {
+          }
+          else if (1 == nvalue || 0 == nvalue) {
             if (((power >> i) &1) == (power_t)nvalue) {
               return 1;
             }
@@ -422,6 +444,7 @@ void HandleDomoticzConfiguration(void)
       page.replace("{4", String((int)Settings.domoticz_switch_idx[i]));
     }
     page.replace("{1", String(i +1));
+    if ((SONOFF_IFAN02 == Settings.module) && (1 == i)) { break; }
   }
   for (int i = 0; i < DZ_MAX_SENSORS; i++) {
     page += FPSTR(HTTP_FORM_DOMOTICZ_SENSOR);