mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

[BP5758D] Fix Sleep 

BP5758D outputs have to be disabled before sleep.
See https://github.com/openshwprojects/OpenBK7231T_App/issues/221
This commit is contained in:
DSchndr 2022-10-07 02:33:32 +02:00 committed by GitHub
parent bc8cc520a2
commit e4778deb42
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 20 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
tasmota/tasmota_xlgt_light/xlgt_08_bp5758d.ino
View File

@ -29,7 +29,7 @@
#define XLGT_08 8
// Layout: Bits B[7:8]=10 (address selection identification bits), B[5:6] sleep mode if set to 00, B[0:4] Address selection
#define BP5758D_ADDR_SLEEP 0x86 //10 00 0110: Sleep mode bits set (OUT1 gray-scale level setup selected, ignored by chip)
#define BP5758D_ADDR_SLEEP 0x80 //10 00 0110: Sleep mode bits set (OUT1-5 enable setup selected, ignored by chip)
#define BP5758D_ADDR_SETUP 0x90 //10 01 0000: OUT1-5 enable/disable setup - used during init
#define BP5758D_ADDR_OUT1_CR 0x91 //10 01 0001: OUT1 current range
#define BP5758D_ADDR_OUT2_CR 0x92 //10 01 0010: OUT2 current range
@ -44,6 +44,7 @@
// Output enabled (OUT1-5, represented by lower 5 bits)
#define BP5758D_ENABLE_OUTPUTS_ALL 0x1F
#define BP5758D_DISABLE_OUTPUTS_ALL 0x00
// Current values: Bit 6 to 0 represent 30mA, 32mA, 16mA, 8mA, 4mA, 2mA, 1mA respectively
#define BP5758D_10MA 0x0A // 0 0001010
@ -52,6 +53,8 @@
#define BP5758D_65MA 0x63 // 0 1100011
#define BP5758D_90MA 0x7C // 0 1111100
bool bIsSleeping = false; //Save sleep state of Lamp
struct BP5758D {
uint8_t clk = 0;
uint8_t data = 0;
@ -110,11 +113,22 @@ bool Bp5758dSetChannels(void) {
// If we receive 0 for all channels, we'll assume that the lightbulb is off, and activate BP5758d's sleep mode.
if (cur_col_10[0]==0 && cur_col_10[1]==0 && cur_col_10[2]==0 && cur_col_10[3]==0 && cur_col_10[4]==0) {
Bp5758dStart(BP5758D_ADDR_SLEEP);
Bp5758dStop();
return true;
BP5758DStart(BP5758D_ADDR_SLEEP);
bIsSleeping = true;
BP5758DStart(BP5758D_ADDR_SETUP); //Select B1: Output enable setup
BP5758DWriteByte(BP5758D_DISABLE_OUTPUTS_ALL); //Set all outputs to OFF
BP5758DStop(); //Stop transmission since we have to set Sleep mode (can probably be removed)
BP5758DStart(BP5758D_ADDR_SLEEP); //Enable sleep mode
BP5758DStop();
return;
}
if(bIsSleeping) {
bIsSleeping = false; //No need to run it every time a val gets changed
BP5758DStart(BP5758D_ADDR_SETUP); //Sleep mode gets disabled too since bits 5:6 get set to 01
BP5758DWriteByte(BP5758D_ENABLE_OUTPUTS_ALL); //Set all outputs to ON
BP5758DStop();
}
// Even though we could address changing channels only, in practice we observed that the lightbulb always sets all channels.
Bp5758dStart(BP5758D_ADDR_OUT1_GL);
// Brigtness values are transmitted as two bytes. The light-bulb accepts a 10-bit integer (0-1023) as an input value.
@ -146,7 +160,7 @@ void Bp5758dModuleSelected(void)
// Output enabled: enable all outputs since we're using a RGBCW light
Bp5758dWrite(BP5758D_ENABLE_OUTPUTS_ALL);
// Set currents for OUT1-OUT5
Bp5758dWrite(BP5758D_14MA);
Bp5758dWrite(BP5758D_14MA); //TODO: Make this configurable
Bp5758dWrite(BP5758D_14MA);
Bp5758dWrite(BP5758D_14MA);
Bp5758dWrite(BP5758D_14MA);