Merge branch 'arendst/development' into development

2018-06-01 18:48:09 +02:00 · 2018-06-01 18:48:09 +02:00 · e5811c4e9c
parent d93b9971a5 3b3f1e0bf0
commit e5811c4e9c
42 changed files with 1306 additions and 340 deletions
--- a/README.md
+++ b/README.md
@ -15,7 +15,7 @@ If you like **Sonoff-Tasmota**, give it a star, or fork it and contribute!

 Current version is **5.14.0b** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.

-### Quick install
+### Quick Install
 Download one of the released binaries from https://github.com/arendst/Sonoff-Tasmota/releases and flash it to your hardware as documented in the wiki.

 ### Important User Compilation Information
@ -68,7 +68,7 @@ The following devices are supported:
 - [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
 - Wemos D1 mini, NodeMcu and Ledunia

-### Firmware release information
+### Firmware Release Information
 Different firmware images are released based on Features and Sensors selection guided by code and memory usage.

 - The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter.
@ -129,7 +129,7 @@ Different firmware images are released based on Features and Sensors selection g
 | USE_ARILUX_RF                  | x | x | - | x | x |
 | USE_SR04                       | x | - | - | x | x |

-#### Typical file size
+#### Typical File Size

 | ESP/Arduino library version | sonoff | classic | minimal | knx  | allsensors |
 |-----------------------------|--------|---------|---------|------|------------|
@ -147,7 +147,7 @@ You can contribute to Sonoff-Tasmota by

 ### Credits

-#### Libraries used
+#### Libraries Used
 Libraries used with Sonoff-Tasmota are:
 - [ESP8266 core for Arduino](https://github.com/esp8266/Arduino)
 - [Adafruit BME680](https://github.com/adafruit/Adafruit_BME680)
--- a/platformio.ini
+++ b/platformio.ini
@ -30,6 +30,7 @@ env_default = sonoff
 ;env_default = sonoff-PL
 ;env_default = sonoff-PT
 ;env_default = sonoff-RU
+;env_default = sonoff-UK
 ;env_default = sonoff-TW

 [common] ; ************************************************************
@ -46,7 +47,7 @@ platform = espressif8266@1.5.0

 framework = arduino
 board = esp01_1m
-board_flash_mode = dout
+board_build.flash_mode = dout

 ; *** Fix espressif8266@1.7.0 induced undesired all warnings
 build_unflags = -Wall
@ -82,7 +83,7 @@ extra_scripts = pio/strip-floats.py
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags}
 monitor_speed = ${common.monitor_speed}
@ -95,7 +96,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DBE_MINIMAL
 monitor_speed = ${common.monitor_speed}
@ -107,7 +108,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DUSE_CLASSIC
 monitor_speed = ${common.monitor_speed}
@ -119,7 +120,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DUSE_KNX_NO_EMULATION
 monitor_speed = ${common.monitor_speed}
@ -131,7 +132,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DUSE_ALL_SENSORS
 monitor_speed = ${common.monitor_speed}
@ -143,7 +144,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=bg-BG
 monitor_speed = ${common.monitor_speed}
@ -155,7 +156,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=pt-BR
 monitor_speed = ${common.monitor_speed}
@ -167,7 +168,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=zh-CN
 monitor_speed = ${common.monitor_speed}
@ -179,7 +180,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=cs-CZ
 monitor_speed = ${common.monitor_speed}
@ -191,7 +192,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=de-DE
 monitor_speed = ${common.monitor_speed}
@ -203,7 +204,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=es-AR
 monitor_speed = ${common.monitor_speed}
@ -215,7 +216,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=fr-FR
 monitor_speed = ${common.monitor_speed}
@ -227,7 +228,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=el-GR
 monitor_speed = ${common.monitor_speed}
@ -239,7 +240,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=hu-HU
 monitor_speed = ${common.monitor_speed}
@ -251,7 +252,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=it-IT
 monitor_speed = ${common.monitor_speed}
@ -263,7 +264,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=nl-NL
 monitor_speed = ${common.monitor_speed}
@ -275,7 +276,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=pl-PL
 monitor_speed = ${common.monitor_speed}
@ -287,7 +288,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=pt-PT
 monitor_speed = ${common.monitor_speed}
@ -299,7 +300,7 @@ extra_scripts = ${common.extra_scripts}
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=ru-RU
 monitor_speed = ${common.monitor_speed}
@ -307,11 +308,23 @@ upload_speed = ${common.upload_speed}
 upload_port = ${common.upload_port}
 extra_scripts = ${common.extra_scripts}

+[env:sonoff-UK]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board}
+board_build.flash_mode = ${common.board_build.flash_mode}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} -DMY_LANGUAGE=uk-UK
+monitor_speed = ${common.monitor_speed}
+upload_speed = ${common.upload_speed}
+upload_port = ${common.upload_port}
+extra_scripts = ${common.extra_scripts}
+
 [env:sonoff-TW]
 platform = ${common.platform}
 framework = ${common.framework}
 board = ${common.board}
-board_flash_mode = ${common.board_flash_mode}
+board_build.flash_mode = ${common.board_build.flash_mode}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} -DMY_LANGUAGE=zh-TW
 monitor_speed = ${common.monitor_speed}
--- a/sonoff/_releasenotes.ino
+++ b/sonoff/_releasenotes.ino
@ -1,6 +1,29 @@
 /* 5.14.0b
+* Added Console Commands to send KNX Commands
+  usage: KnxTx_Cmnd[slot] command
+  where [slot] is any of the 5 slots on the KNX Menu and command is 0 or 1
+  example: KnxTx_Cmnd1 0
+* Added Console Commands to send KNX Values
+  usage: KnxTx_Val[slot] value
+  where [slot] is any of the 5 slots on the KNX Menu and value is a number
+  example: KnxTx_Val1 35
+* Added Slots on the KNX Web Menu to select Group Addess to send data from console commands
+* Added Events to trigger rules when received data from KNX
+  usage on rules as: event#KnxRx_Val[slot]
+  where [slot] is any of the 5 slots on the KNX Menu
+  example: rule on event#KnxRx_Val1 do VAR1 %value% endon
+* Added Events to trigger rules when received read requests from KNX
+  usage on rules as: event#KnxRx_Req[slot]
+  where [slot] is any of the 5 slots on the KNX Menu
+  example: rule on event#KnxRx_Req1 do KnxTx_Val1 35 endon
+ * Added Slots on the KNX Web Menu to select Group Addess to receive data to trigger rules
 * Add two rule sets of 511 characters using commands rule1, rule2 and rule3
+ * Add Ukranian language file
 * Add rule support for IrReceive and RfReceive (#2758)
+ * Add command WebSend [<host>(:<port>,<user>:<password>)] <command> (#2821)
+ * Add source information to command execution to be shown with logging option 3 (#2843)
+ * Fix some Pow R2 and S31 checksum errors (#1907)
+ * Fix Hardware Watchdog restart when using event command (#2853)
 *
 * 5.14.0a
 * Add feature information to Status 4
--- a/sonoff/i18n.h
+++ b/sonoff/i18n.h
@ -42,6 +42,7 @@
 #define D_JSON_BUILDDATETIME "BuildDateTime"
 #define D_JSON_CO2 "CarbonDioxide"
 #define D_JSON_COMMAND "Command"
+#define D_JSON_CONNECT_FAILED "Connect failed"
 #define D_JSON_COREVERSION "Core"
 #define D_JSON_COUNTER "Counter"
 #define D_JSON_CURRENT "Current"         // As in Voltage and Current
@ -67,6 +68,7 @@
 #define D_JSON_GATEWAY "Gateway"
 #define D_JSON_HEAPSIZE "Heap"
 #define D_JSON_HIGH "High"
+#define D_JSON_HOST_NOT_FOUND "Host not found"
 #define D_JSON_HSBCOLOR "HSBColor"
 #define D_JSON_HUMIDITY "Humidity"
 #define D_JSON_I2CSCAN_DEVICES_FOUND_AT "Device(s) found at"
@ -133,6 +135,7 @@
 #define D_JSON_VOLTAGE "Voltage"
 #define D_JSON_WIFI "Wifi"
 #define D_JSON_WRONG "Wrong"
+#define D_JSON_WRONG_PARAMETERS "Wrong parameters"
 #define D_JSON_YESTERDAY "Yesterday"
 #define D_JSON_ZERO_POINT_CALIBRATION "Zero Point Calibration"

@ -213,14 +216,6 @@
  #define D_WCFG_5_WAIT "Wait"
 #define D_CMND_FRIENDLYNAME "FriendlyName"
 #define D_CMND_SWITCHMODE "SwitchMode"
-#define D_CMND_WEBSERVER "Webserver"
-  #define D_JSON_WEBSERVER_MODE "WebServerMode"
-  #define D_JSON_ACTIVE_FOR "Active for"
-  #define D_JSON_ON_DEVICE "on"
-  #define D_JSON_WITH_IP_ADDRESS "with IP address"
-#define D_CMND_WEBPASSWORD "WebPassword"
-#define D_CMND_WEBLOG "WebLog"
-#define D_CMND_EMULATION "Emulation"
 #define D_CMND_TELEPERIOD "TelePeriod"
 #define D_CMND_RESTART "Restart"
  #define D_JSON_ONE_TO_RESTART "1 to restart"
@ -238,7 +233,7 @@
 #define D_CMND_SERIALDELIMITER "SerialDelimiter"
 #define D_CMND_BAUDRATE "Baudrate"

-// Commands xdrv_00_mqtt.ino
+// Commands xdrv_01_mqtt.ino
 #define D_CMND_MQTTHOST "MqttHost"
 #define D_CMND_MQTTPORT "MqttPort"
 #define D_CMND_MQTTRETRY "MqttRetry"
@ -263,37 +258,16 @@
 #define D_CMND_SENSORRETAIN "SensorRetain"
 #define D_CMND_PUBLISH "Publish"

-// Commands xdrv_01_light.ino
-#define D_CMND_CHANNEL "Channel"
-#define D_CMND_COLOR "Color"
-#define D_CMND_COLORTEMPERATURE "CT"
-#define D_CMND_DIMMER "Dimmer"
-#define D_CMND_HSBCOLOR "HSBColor"
-#define D_CMND_LED "Led"
-#define D_CMND_LEDTABLE "LedTable"
-#define D_CMND_FADE "Fade"
-#define D_CMND_PIXELS "Pixels"
-#define D_CMND_ROTATION "Rotation"
-#define D_CMND_SCHEME "Scheme"
-#define D_CMND_SPEED "Speed"
-#define D_CMND_WAKEUP "Wakeup"
-#define D_CMND_WAKEUPDURATION "WakeUpDuration"
-#define D_CMND_WIDTH "Width"
-
-// Commands xdrv_02_irremote.ino
-#define D_CMND_IRSEND "IRSend"
-  #define D_JSON_INVALID_JSON "Invalid JSON"
-  #define D_JSON_PROTOCOL_NOT_SUPPORTED "Protocol not supported"
-  #define D_JSON_IR_PROTOCOL "Protocol"
-  #define D_JSON_IR_BITS "Bits"
-  #define D_JSON_IR_DATA "Data"
-#define D_CMND_IRHVAC "IRHVAC"
-  #define D_JSON_IRHVAC_VENDOR "VENDOR"
-  #define D_JSON_IRHVAC_POWER "POWER"
-  #define D_JSON_IRHVAC_MODE "MODE"
-  #define D_JSON_IRHVAC_FANSPEED "FANSPEED"
-  #define D_JSON_IRHVAC_TEMP "TEMP"
-#define D_JSON_IRRECEIVED "IrReceived"
+// Commands xdrv_02_webserver.ino
+#define D_CMND_WEBSERVER "Webserver"
+  #define D_JSON_WEBSERVER_MODE "WebServerMode"
+  #define D_JSON_ACTIVE_FOR "Active for"
+  #define D_JSON_ON_DEVICE "on"
+  #define D_JSON_WITH_IP_ADDRESS "with IP address"
+#define D_CMND_WEBPASSWORD "WebPassword"
+#define D_CMND_WEBLOG "WebLog"
+#define D_CMND_WEBSEND "WebSend"
+#define D_CMND_EMULATION "Emulation"

 // Commands xdrv_03_energy.ino
 #define D_CMND_POWERLOW "PowerLow"
@ -324,7 +298,39 @@
  #define D_JSON_ENERGYMONITOR "EnergyMonitor"
  #define D_JSON_MAXENERGYREACHED "MaxEnergyReached"

-// Commands xdrv_04_snfbridge.ino
+// Commands xdrv_04_light.ino
+#define D_CMND_CHANNEL "Channel"
+#define D_CMND_COLOR "Color"
+#define D_CMND_COLORTEMPERATURE "CT"
+#define D_CMND_DIMMER "Dimmer"
+#define D_CMND_HSBCOLOR "HSBColor"
+#define D_CMND_LED "Led"
+#define D_CMND_LEDTABLE "LedTable"
+#define D_CMND_FADE "Fade"
+#define D_CMND_PIXELS "Pixels"
+#define D_CMND_ROTATION "Rotation"
+#define D_CMND_SCHEME "Scheme"
+#define D_CMND_SPEED "Speed"
+#define D_CMND_WAKEUP "Wakeup"
+#define D_CMND_WAKEUPDURATION "WakeUpDuration"
+#define D_CMND_WIDTH "Width"
+
+// Commands xdrv_05_irremote.ino
+#define D_CMND_IRSEND "IRSend"
+  #define D_JSON_INVALID_JSON "Invalid JSON"
+  #define D_JSON_PROTOCOL_NOT_SUPPORTED "Protocol not supported"
+  #define D_JSON_IR_PROTOCOL "Protocol"
+  #define D_JSON_IR_BITS "Bits"
+  #define D_JSON_IR_DATA "Data"
+#define D_CMND_IRHVAC "IRHVAC"
+  #define D_JSON_IRHVAC_VENDOR "VENDOR"
+  #define D_JSON_IRHVAC_POWER "POWER"
+  #define D_JSON_IRHVAC_MODE "MODE"
+  #define D_JSON_IRHVAC_FANSPEED "FANSPEED"
+  #define D_JSON_IRHVAC_TEMP "TEMP"
+#define D_JSON_IRRECEIVED "IrReceived"
+
+// Commands xdrv_06_snfbridge.ino
 #define D_CMND_RFCODE "RfCode"
 #define D_CMND_RFHIGH "RfHigh"
 #define D_CMND_RFHOST "RfHost"
@ -340,7 +346,7 @@
 #define D_CMND_RFSYNC "RfSync"
  #define D_JSON_RFRECEIVED "RfReceived"

-// Commands xdrv_05_domoticz.ino
+// Commands xdrv_07_domoticz.ino
 #define D_CMND_DOMOTICZ "Domoticz"
 #define D_CMND_IDX "Idx"
 #define D_CMND_KEYIDX "KeyIdx"
@ -348,18 +354,6 @@
 #define D_CMND_SENSORIDX "SensorIdx"
 #define D_CMND_UPDATETIMER "UpdateTimer"

-// Commands xdrv_06_display.ino
-#define D_CMND_DISPLAY "Display"
-#define D_CMND_DISP_ADDRESS "Address"
-#define D_CMND_DISP_COLS "Cols"
-#define D_CMND_DISP_DIMMER "Dimmer"
-#define D_CMND_DISP_MODE "Mode"
-#define D_CMND_DISP_MODEL "Model"
-#define D_CMND_DISP_REFRESH "Refresh"
-#define D_CMND_DISP_ROWS "Rows"
-#define D_CMND_DISP_SIZE "Size"
-#define D_CMND_DISP_TEXT "Text"
-
 // Commands xdrv_08_serial_bridge.ino
 #define D_CMND_SSERIALSEND "SSerialSend"
 #define D_CMND_SBAUDRATE "SBaudrate"
@ -380,6 +374,18 @@
 #define D_CMND_LATITUDE "Latitude"
 #define D_CMND_LONGITUDE "Longitude"

+// Commands xdrv_98_display.ino
+#define D_CMND_DISPLAY "Display"
+#define D_CMND_DISP_ADDRESS "Address"
+#define D_CMND_DISP_COLS "Cols"
+#define D_CMND_DISP_DIMMER "Dimmer"
+#define D_CMND_DISP_MODE "Mode"
+#define D_CMND_DISP_MODEL "Model"
+#define D_CMND_DISP_REFRESH "Refresh"
+#define D_CMND_DISP_ROWS "Rows"
+#define D_CMND_DISP_SIZE "Size"
+#define D_CMND_DISP_TEXT "Text"
+
 /********************************************************************************************/

 #define D_ASTERIX "********"
--- a/sonoff/language/bg-BG.h
+++ b/sonoff/language/bg-BG.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Използване на параметри по подразбиране"
 #define D_ERASED_SECTOR "Изтрит сектор"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Минимаен фърмуеър - моля надградете го"
 #define D_WEBSERVER_ACTIVE_ON "Уеб сървърът е активен на"
 #define D_WITH_IP_ADDRESS "с IP адрес"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Включете ниво 2 на лога, ако очаквате отговор"
 #define D_NEED_USER_AND_PASSWORD "Очаква user=<username>&password=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Проверка на TLS отпечатък..."
 #define D_TLS_CONNECT_FAILED_TO "Неуспешно TLS свързване към"
 #define D_RETRY_IN "Повторно след"
@ -335,7 +335,7 @@
 #define D_INSECURE "Нешифрована връзка, недействителен отпечатък"
 #define D_CONNECT_FAILED_TO "Грешка при свързването към"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast е изключен"
 #define D_MULTICAST_REJOINED "Multicast е повторно съединен"
 #define D_MULTICAST_JOIN_FAILED "Multicast грешка при присъединяването"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST аргументи"
 #define D_3_RESPONSE_PACKETS_SENT "Изпратени са 3 пакета за отговор"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz параметри"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "изпратен до"
 #define D_KNX_WARNING "Груповият адрес ( 0 / 0 / 0 ) е резервиран и не може да бъде използван."
 #define D_KNX_ENHANCEMENT "Подобрена комуникация"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Използвана енергия днес"
--- a/sonoff/language/cs-CZ.h
+++ b/sonoff/language/cs-CZ.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Použij defaultní hodnoty"
 #define D_ERASED_SECTOR "Smazaný sektor"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MINIMÁLNÍ - prosím zaktualizujte"
 #define D_WEBSERVER_ACTIVE_ON "Aktivní Web server"
 #define D_WITH_IP_ADDRESS "na IP adrese"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Zapni úroveň 2 zápisu Weblog, pokud je očekávána odpověď"
 #define D_NEED_USER_AND_PASSWORD "Vyžadován uživatel=<username>&heslo=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Verifikuj otisk TLS..."
 #define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do"
 #define D_RETRY_IN "Zopakuji za"
@ -335,7 +335,7 @@
 #define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS"
 #define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast je vypnutý"
 #define D_MULTICAST_REJOINED "Multicast opět připojený"
 #define D_MULTICAST_JOIN_FAILED "Multicast neúspěšný"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 pakety odpovědi odeslány"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Nastavení Domoticz"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "pošli"
 #define D_KNX_WARNING "Skupinová adresa ( 0 / 0 / 0 ) je rezervována a nemůže být použita."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Spotřeba Dnes"
--- a/sonoff/language/de-DE.h
+++ b/sonoff/language/de-DE.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Standard verwenden"
 #define D_ERASED_SECTOR "gelöschter Sektor"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMUM-Firmware - bitte upgraden"
 #define D_WEBSERVER_ACTIVE_ON "Web-Server aktiv bei"
 #define D_WITH_IP_ADDRESS "mit IP-Adresse"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Aktivere Web Log Level 2 falls Reaktion erwartet"
 #define D_NEED_USER_AND_PASSWORD "Benötige user=<Benutzername>&password=<Passwort>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "TLS-Fingerabdruck wird verifiziert..."
 #define D_TLS_CONNECT_FAILED_TO "TLS-Verbindung fehlgeschlagen an"
 #define D_RETRY_IN "Wiederversuch in"
@ -335,7 +335,7 @@
 #define D_INSECURE "unsichere Verbindung aufgrund ungültigen Fingerabdrucks"
 #define D_CONNECT_FAILED_TO "Verbindung fehlgeschlagen aufgrund von"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast deaktiviert"
 #define D_MULTICAST_REJOINED "Multicast (wieder-)verbunden"
 #define D_MULTICAST_JOIN_FAILED "Multicast Verbindung fehlgeschlagen"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST-Argumente"
 #define D_3_RESPONSE_PACKETS_SENT "3 Antwortpakete gesendet"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz-Parameter"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Energie heute"
--- a/sonoff/language/el-GR.h
+++ b/sonoff/language/el-GR.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Χρήση προεπιλογών"
 #define D_ERASED_SECTOR "Διαγραμμένος τομέας"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware - παρακαλώ αναβαθμήστε"
 #define D_WEBSERVER_ACTIVE_ON "Web διακομιστής ενεργός"
 #define D_WITH_IP_ADDRESS "με διεύθυνση IP"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Ενεργοποιήστε το weblog 2 αν περιμένετε απάντηση"
 #define D_NEED_USER_AND_PASSWORD "Χρειάζεστε user=<όνομα χρήστη>&password=<κωδικό χρήστη>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Επαλήθευση TLS fingerprint..."
 #define D_TLS_CONNECT_FAILED_TO "Αποτυχία TLS σύνδεσης"
 #define D_RETRY_IN "Επανάληψη σε"
@ -335,7 +335,7 @@
 #define D_INSECURE "Μη ασφαλής σύνδεση λόγο ακατάλληλου Fingerprint"
 #define D_CONNECT_FAILED_TO "Αποτυχία σύνδεσης στο"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast απενεργοποιημένο"
 #define D_MULTICAST_REJOINED "Multicast επανασύνδεση"
 #define D_MULTICAST_JOIN_FAILED "Αποτυχία σύνδεσης Multicast"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3πλο πακέτο απάντησεης στάλθηκε"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz παράμετροι"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "αποστολή σε"
 #define D_KNX_WARNING "Η Ομάδα Διευθύνσεων ( 0 / 0 / 0 ) είναι δεσμευμένη και δεν μπορεί να χρησιμοποιηθεί."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Energy Σήμερα"
--- a/sonoff/language/en-GB.h
+++ b/sonoff/language/en-GB.h
@ -28,7 +28,7 @@
 * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
 * Use online command Prefix to translate cmnd, stat and tele.
 *
- * Updated until v5.14.0a
+ * Updated until v5.14.0b
 \*********************************************************************/

 //#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Use defaults"
 #define D_ERASED_SECTOR "Erased sector"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware - please upgrade"
 #define D_WEBSERVER_ACTIVE_ON "Web server active on"
 #define D_WITH_IP_ADDRESS "with IP address"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Enable weblog 2 if response expected"
 #define D_NEED_USER_AND_PASSWORD "Need user=<username>&password=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Verify TLS fingerprint..."
 #define D_TLS_CONNECT_FAILED_TO "TLS Connect failed to"
 #define D_RETRY_IN "Retry in"
@ -335,7 +335,7 @@
 #define D_INSECURE "Insecure connection due to invalid Fingerprint"
 #define D_CONNECT_FAILED_TO "Connect failed to"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast disabled"
 #define D_MULTICAST_REJOINED "Multicast (re)joined"
 #define D_MULTICAST_JOIN_FAILED "Multicast join failed"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 response packets sent"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz parameters"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Energy Today"
--- a/sonoff/language/es-AR.h
+++ b/sonoff/language/es-AR.h
@ -28,7 +28,7 @@
 * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
 * Use online command Prefix to translate cmnd, stat and tele.
 *
- * Updated until v5.14.0a
+ * Updated until v5.14.0b
 \*********************************************************************/

 #define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Usar valores por defecto"
 #define D_ERASED_SECTOR "Sector borrado"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MÍNIMO - actualice por favor"
 #define D_WEBSERVER_ACTIVE_ON "Servidor web activo en"
 #define D_WITH_IP_ADDRESS "con dirección IP"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 si desea respuesta"
 #define D_NEED_USER_AND_PASSWORD "Se necesita user=<username>&password=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Verificar TLS fingerprint..."
 #define D_TLS_CONNECT_FAILED_TO "Falló Conección TLS a"
 #define D_RETRY_IN "Reintentando"
@ -335,7 +335,7 @@
 #define D_INSECURE "Conección insegura por Fingerprint no válido"
 #define D_CONNECT_FAILED_TO "Falló Conección a"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast deshabilitado"
 #define D_MULTICAST_REJOINED "Multicast (re)conectado"
 #define D_MULTICAST_JOIN_FAILED "Conección Multicast fallida"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 paquetes de respuesta enviados"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Parámetros Domoticz"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "enviada a"
 #define D_KNX_WARNING "La dirección de grupo ( 0 / 0 / 0 ) está reservada y no puede ser utilizada."
 #define D_KNX_ENHANCEMENT "Mejora de Comunicación"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Energía Hoy"
--- a/sonoff/language/fr-FR.h
+++ b/sonoff/language/fr-FR.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Utiliser par défaut"
 #define D_ERASED_SECTOR "Secteur effacé"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MINIMAL - merci de mettre à jour"
 #define D_WEBSERVER_ACTIVE_ON "Serveur web actif sur"
 #define D_WITH_IP_ADDRESS "avec l'adresse IP"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Activer Weblog 2 si une réponse est attendue"
 #define D_NEED_USER_AND_PASSWORD "Nécessite utilisateur=<username>&password=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Vérification d'empreinte TLS ..."
 #define D_TLS_CONNECT_FAILED_TO "Échec de connexion TLS à"
 #define D_RETRY_IN "Nouvelle tentative dans"
@ -335,7 +335,7 @@
 #define D_INSECURE "Connexion non sécurisée car empreinte non vérifiée"
 #define D_CONNECT_FAILED_TO "Échec de connexion à"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast désactivé"
 #define D_MULTICAST_REJOINED "Multicast (re)joint"
 #define D_MULTICAST_JOIN_FAILED "Multicast échec abonnement"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 paquets de réponse envoyés"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Paramètres Domoticz"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "envoyé à"
 #define D_KNX_WARNING "L'Adresse de Groupe ( 0 / 0 / 0 ) est réservée et ne peut être utilisée."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xsns_03_energy.ino
 #define D_ENERGY_TODAY "Énergie aujourd'hui"
--- a/sonoff/language/hu-HU.h
+++ b/sonoff/language/hu-HU.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Alapértelmezett beáll. használata"
 #define D_ERASED_SECTOR "Szektor törlése"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware - frissítsd!"
 #define D_WEBSERVER_ACTIVE_ON "Web szerver aktív a"
 #define D_WITH_IP_ADDRESS "IP címe:"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Engedélyezz 2-es weblogolást több információért"
 #define D_NEED_USER_AND_PASSWORD "Kell felhasználó=<felhasználónév>&jelszó=<jelszó>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "TLS fingerprint hitelesítése..."
 #define D_TLS_CONNECT_FAILED_TO "TLS Csatlakozás sikertelen a"
 #define D_RETRY_IN "Újrapróbálás"
@ -335,7 +335,7 @@
 #define D_INSECURE "Nem biztonságos kapcsolat érvénytelen Fingerprint miatt"
 #define D_CONNECT_FAILED_TO "Sikertelen csatlakozás a"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast kikapcsolva"
 #define D_MULTICAST_REJOINED "Multicast (újra)csatlakozás"
 #define D_MULTICAST_JOIN_FAILED "Multicast csatlakozás sikertelen"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 válaszcsomagok elküldve"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz paraméterek"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Mai Energia"
--- a/sonoff/language/it-IT.h
+++ b/sonoff/language/it-IT.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Utilizzo valori default"
 #define D_ERASED_SECTOR "Settore cancellato"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware - effettuare aggiornamento"
 #define D_WEBSERVER_ACTIVE_ON "Web server attivo su"
 #define D_WITH_IP_ADDRESS "con indirizzo IP"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Abilitare weblog 2 se è attesa una risposta"
 #define D_NEED_USER_AND_PASSWORD "Richiesto user=<username>&password=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Verifica TLS fingerprint..."
 #define D_TLS_CONNECT_FAILED_TO "Connessione TLS fallita a"
 #define D_RETRY_IN "Nuovo tentativo in"
@ -335,7 +335,7 @@
 #define D_INSECURE "Connessione insicura a causa di Fingerprint non valido"
 #define D_CONNECT_FAILED_TO "Connessione Fallita a"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast disabilitato"
 #define D_MULTICAST_REJOINED "Multicast (ri)associato"
 #define D_MULTICAST_JOIN_FAILED "Associazione Multicast fallita"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST argomenti"
 #define D_3_RESPONSE_PACKETS_SENT "3 pacchetti di risposta inviati"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Parametri Domoticz"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "invia a"
 #define D_KNX_WARNING "L'indirizzo del gruppo ( 0 / 0 / 0 ) è riservato e non può essere usato."
 #define D_KNX_ENHANCEMENT "Miglioramento Comunicazione"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Energia Oggi"
--- a/sonoff/language/nl-NL.h
+++ b/sonoff/language/nl-NL.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Gebruik standaardwaarden"
 #define D_ERASED_SECTOR "Wis sector"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware - opwaarderen"
 #define D_WEBSERVER_ACTIVE_ON "Webserver actief op"
 #define D_WITH_IP_ADDRESS "met IP adres"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Schakel weblog 2 in indien antwoord verwacht"
 #define D_NEED_USER_AND_PASSWORD "Benodig user=<gebruiker>&password=<webwachtwoord>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Controleer TLS vingerafdruk..."
 #define D_TLS_CONNECT_FAILED_TO "TLS Verbinding mislukt naar"
 #define D_RETRY_IN "Opnieuw proberen over"
@ -335,7 +335,7 @@
 #define D_INSECURE "Door ongeldige vingerafdruk een onveilige verbinding"
 #define D_CONNECT_FAILED_TO "Verbinding mislukt naar"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast uitgeschakeld"
 #define D_MULTICAST_REJOINED "Multicast verbonden"
 #define D_MULTICAST_JOIN_FAILED "Multicast verbinding mislukt"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST argumenten"
 #define D_3_RESPONSE_PACKETS_SENT "3 antwoord paketten verstuurd"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz parameters"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Toets idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "verzend naar"
 #define D_KNX_WARNING "Groep adres (0/0/0) is gereserveerd en mag niet worden gebruikt."
 #define D_KNX_ENHANCEMENT "Verbeter verbinding"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Verbruik vandaag"
--- a/sonoff/language/pl-PL.h
+++ b/sonoff/language/pl-PL.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Użyj domyślnych"
 #define D_ERASED_SECTOR "Wymazany sektor"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Oprogramowanie MINIMAL - proszę uaktualnić"
 #define D_WEBSERVER_ACTIVE_ON "Aktywny serwer Web"
 #define D_WITH_IP_ADDRESS "z adresem IP"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Włącz poziom 2 zapisu Weblog, jeśli oczekiwana jest odpowiedź"
 #define D_NEED_USER_AND_PASSWORD "Wymagany użytkownik=<username>&hasło=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Weryfikuj odcisk TLS..."
 #define D_TLS_CONNECT_FAILED_TO "Nieudane połączenie TLS do"
 #define D_RETRY_IN "Spróbuj ponownie"
@ -335,7 +335,7 @@
 #define D_INSECURE "Nieprawidłowe połączenie z powodu błędnego odcisku TLS"
 #define D_CONNECT_FAILED_TO "Nie udało się nawiązać połączenia"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast jest wyłączony"
 #define D_MULTICAST_REJOINED "Multicast (re)dołączony"
 #define D_MULTICAST_JOIN_FAILED "Multicast nie powiodło się"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 pakiety odpowiedzi wysyłane"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Parametry Domoticz"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Energia Dzisiaj"
--- a/sonoff/language/pt-BR.h
+++ b/sonoff/language/pt-BR.h
@ -28,7 +28,7 @@
 * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
 * Use online command Prefix to translate cmnd, stat and tele.
 *
- * Updated until v5.13.0
+ * Updated until v5.14.0b
 \*********************************************************************/

 //#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@ -52,8 +52,8 @@

 // Common
 #define D_ADMIN "Admin"
-#define D_AIR_QUALITY "Qualidade do Ar"
-#define D_AP "Pondo de acesso"                    // Ponto de Acesso
+#define D_AIR_QUALITY "Qualidade do ar"
+#define D_AP "Ponto de acesso"     	// Ponto de Acesso
 #define D_AS "como"
 #define D_AUTO "Auto"
 #define D_BLINK "Pulsar"
@ -64,16 +64,16 @@
 #define D_BY "por"                    // Write by me
 #define D_BYTES "Bytes"
 #define D_CELSIUS "Celsius"
-#define D_CO2 "Dióxido de Carbono"
+#define D_CO2 "Dióxido de carbono"
 #define D_CODE "Código"                // Button code
-#define D_COLDLIGHT "Luz Fria"
+#define D_COLDLIGHT "Luz fria"
 #define D_COMMAND "Comando"
 #define D_CONNECTED "Ligado"
 #define D_COUNT "Contagem"
 #define D_COUNTER "Contador"
 #define D_CURRENT "Corrente"          // As in Voltage and Current
 #define D_DATA "Dados"
-#define D_DARKLIGHT "Luz Escura"
+#define D_DARKLIGHT "Luz escura"
 #define D_DEBUG "Depurar"
 #define D_DISABLED "Desabilitado"
 #define D_DISTANCE "Distância"
@ -91,8 +91,8 @@
 #define D_FALLBACK_TOPIC "Tópico para retornar"
 #define D_FALSE "Falso"
 #define D_FILE "Arquivo"
-#define D_FREE_MEMORY "Memória Livre"
-#define D_FREQUENCY "Frequency"
+#define D_FREE_MEMORY "Memória livre"
+#define D_FREQUENCY "Frequência"
 #define D_GAS "Gás"
 #define D_GATEWAY "Gateway"
 #define D_GROUP "Grupo"
@ -103,7 +103,7 @@
 #define D_IMMEDIATE "Imediato"      // Button immediate
 #define D_INDEX "Índice"
 #define D_INFO "Informação"
-#define D_INFRARED "Infrared"
+#define D_INFRARED "Infravermelho"
 #define D_INITIALIZED "Inicializado"
 #define D_IP_ADDRESS "Endereço IP"
 #define D_LIGHT "Luz"
@ -122,9 +122,9 @@
 #define D_PORT "Porta"
 #define D_POWER_FACTOR "Fator de potência"
 #define D_POWERUSAGE "Potência"
-#define D_POWERUSAGE_ACTIVE "Active Power"
-#define D_POWERUSAGE_APPARENT "Apparent Power"
-#define D_POWERUSAGE_REACTIVE "Reactive Power"
+#define D_POWERUSAGE_ACTIVE "Potência ativa"
+#define D_POWERUSAGE_APPARENT "Potência aparente"
+#define D_POWERUSAGE_REACTIVE "Potência reativa"
 #define D_PRESSURE "Pressão"
 #define D_PRESSUREATSEALEVEL "Pressão ao nível do mar"
 #define D_PROGRAM_FLASH_SIZE "Tamanho do programa na memória"
@ -168,10 +168,10 @@
 #define D_WEB_SERVER "Servidor WEB"

 // sonoff.ino
-#define D_WARNING_MINIMAL_VERSION "AVISO esta versão não supporta configurações persistentes"
+#define D_WARNING_MINIMAL_VERSION "AVISO: esta versão não supporta configurações persistentes"
 #define D_LEVEL_10 "nível 1-0"
 #define D_LEVEL_01 "nível 0-1"
-#define D_SERIAL_LOGGING_DISABLED "Registro em serie desabilitado"
+#define D_SERIAL_LOGGING_DISABLED "Registro em série desabilitado"
 #define D_SYSLOG_LOGGING_REENABLED "Registro do Syslog reativado"

 #define D_SET_BAUDRATE_TO "Ajuste da velocidade para"
@ -205,15 +205,15 @@
 #define D_USE_DEFAULTS "Usar predefinições"
 #define D_ERASED_SECTOR "Apagar setores"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware mínimo - Atualizar por favor"
 #define D_WEBSERVER_ACTIVE_ON "Servidor WEB ativo em"
 #define D_WITH_IP_ADDRESS "com o endereço IP"
 #define D_WEBSERVER_STOPPED "Servidor WEB parou"
 #define D_FILE_NOT_FOUND "Arquivo não encontrado"
 #define D_REDIRECTED "Redirecionado para o portal ativo"
-#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager configura o Ponto de Acesso e mantém a estação"
-#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager configura o Ponto de Acesso"
+#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager: configura o Ponto de Acesso e a Estação"
+#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager: configura o Ponto de Acesso"
 #define D_TRYING_TO_CONNECT "Conectar o dispositivo à rede"

 #define D_RESTART_IN "Reinicia em"
@ -238,7 +238,7 @@
 #define D_RESTORE_CONFIGURATION "Repor configuração"
 #define D_MAIN_MENU "Menu principal"

-#define D_MODULE_PARAMETERS "Parametros do módulo"
+#define D_MODULE_PARAMETERS "Parâmetros do módulo"
 #define D_MODULE_TYPE "Tipo de módulo"
 #define D_GPIO "GPIO"
 #define D_SERIAL_IN "Entrada serial"
@ -282,12 +282,12 @@
 #define D_SINGLE_DEVICE "Dispositivo único"
 #define D_MULTI_DEVICE "Múltiplos dispositivos"

-#define D_SAVE_CONFIGURATION "Salvar configuração"
-#define D_CONFIGURATION_SAVED "Configuração salva"
+#define D_SAVE_CONFIGURATION "Gravar configuração"
+#define D_CONFIGURATION_SAVED "Configuração gravada"
 #define D_CONFIGURATION_RESET "Reinicialização da configuração"

 #define D_PROGRAM_VERSION "Versão do programa"
-#define D_BUILD_DATE_AND_TIME "Data e Hora da construção"
+#define D_BUILD_DATE_AND_TIME "Data e Hora da compilação"
 #define D_CORE_AND_SDK_VERSION "Versão Core/SDK"
 #define D_FLASH_WRITE_COUNT "Contagem de gravação flash"
 #define D_MAC_ADDRESS "Endereço MAC"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 se resposta esperada"
 #define D_NEED_USER_AND_PASSWORD "Necessário user=<nome usuário>&password=<senha>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Verifique a impressão digital TLS..."
 #define D_TLS_CONNECT_FAILED_TO "TLS não conseguiu ligar"
 #define D_RETRY_IN "Tentativa em"
@ -335,7 +335,7 @@
 #define D_INSECURE "Ligação insegura devido à impressão digital inválida"
 #define D_CONNECT_FAILED_TO "A ligação falhou ao"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast desabilitado"
 #define D_MULTICAST_REJOINED "Multicast (re)ingressou"
 #define D_MULTICAST_JOIN_FAILED "Multicast falha no reingresso"
@ -355,15 +355,15 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 pacotes de resposta enviados"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Parâmetros Domoticz"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Chave idx"
 #define D_DOMOTICZ_SWITCH_IDX "Interruptor idx"
 #define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
  #define D_DOMOTICZ_TEMP "Temp"
-  #define D_DOMOTICZ_TEMP_HUM "Temp,Hum"
-  #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
+  #define D_DOMOTICZ_TEMP_HUM "Temp,Umi"
+  #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Umi,Pres"
  #define D_DOMOTICZ_POWER_ENERGY "Potência,Energia"
  #define D_DOMOTICZ_ILLUMINANCE "Luminância"
  #define D_DOMOTICZ_COUNT "Contagem/PM1"
@ -401,7 +401,9 @@
 #define D_KNX_COMMAND_OTHER "Outros"
 #define D_SENT_TO "Enviar para"
 #define D_KNX_WARNING "O endereço ( 0 / 0 / 0 ) é reservado e não pode ser usado."
-#define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_ENHANCEMENT "Melhoria da comunicação"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Consumo energético de hoje"
@ -439,19 +441,19 @@
 #define D_SENSOR_I2C_SDA  "I2C SDA"
 #define D_SENSOR_WS2812   "WS2812"
 #define D_SENSOR_IRSEND   "IRsend"
-#define D_SENSOR_SWITCH   "Interruptor"   // Suffix "1"
-#define D_SENSOR_BUTTON   "Botão"   // Suffix "1"
-#define D_SENSOR_RELAY    "Relé"    // Suffix "1i"
-#define D_SENSOR_LED      "Led"      // Suffix "1i"
-#define D_SENSOR_PWM      "PWM"      // Suffix "1"
-#define D_SENSOR_COUNTER  "Contador"  // Suffix "1"
+#define D_SENSOR_SWITCH   "Interruptor"	// Suffix "1"
+#define D_SENSOR_BUTTON   "Botão"   	// Suffix "1"
+#define D_SENSOR_RELAY    "Relé"    	// Suffix "1i"
+#define D_SENSOR_LED      "Led"      	// Suffix "1i"
+#define D_SENSOR_PWM      "PWM"      	// Suffix "1"
+#define D_SENSOR_COUNTER  "Contador"  	// Suffix "1"
 #define D_SENSOR_IRRECV   "IRrecv"
-#define D_SENSOR_MHZ_RX   "MHZ Rx"
-#define D_SENSOR_MHZ_TX   "MHZ Tx"
+#define D_SENSOR_MHZ_RX   "MHz Rx"
+#define D_SENSOR_MHZ_TX   "MHz Tx"
 #define D_SENSOR_PZEM_RX  "PZEM Rx"
 #define D_SENSOR_PZEM_TX  "PZEM Tx"
-#define D_SENSOR_SAIR_RX  "SAir Rx"
-#define D_SENSOR_SAIR_TX  "SAir Tx"
+#define D_SENSOR_SAIR_RX  "SAIR Rx"
+#define D_SENSOR_SAIR_TX  "SAIR Tx"
 #define D_SENSOR_SPI_CS   "SPI CS"
 #define D_SENSOR_SPI_DC   "SPI DC"
 #define D_SENSOR_BACKLIGHT "Luz de fundo"
--- a/sonoff/language/pt-PT.h
+++ b/sonoff/language/pt-PT.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Usar predefinições"
 #define D_ERASED_SECTOR "Apagar setores"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMO firmware - Atualizar Por favor"
 #define D_WEBSERVER_ACTIVE_ON "Servidor WEB ativo em"
 #define D_WITH_IP_ADDRESS "com o endereço IP"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 se resposta esperada"
 #define D_NEED_USER_AND_PASSWORD "Necessário user=<nome utilizador>&password=<palavra chave>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Verifique a impressão digital TLS..."
 #define D_TLS_CONNECT_FAILED_TO "TLS não conseguiu ligar"
 #define D_RETRY_IN "Tentativa em"
@ -335,7 +335,7 @@
 #define D_INSECURE "Ligação insegura devido à impressão digital inválida"
 #define D_CONNECT_FAILED_TO "A ligação falhou ao"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast desabilitado"
 #define D_MULTICAST_REJOINED "Multicast (re)ingressou"
 #define D_MULTICAST_JOIN_FAILED "Multicast falha no reingresso"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 pacotes de resposta enviados"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Parametros Domoticz"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Chave idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Consumo energético de hoje"
--- a/sonoff/language/ru-RU.h
+++ b/sonoff/language/ru-RU.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "Использовать значение по умолчанию"
 #define D_ERASED_SECTOR "Стереть сектор"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Прошивка MINIMAL - пожалуйста обновите"
 #define D_WEBSERVER_ACTIVE_ON "Веб-сервер активен"
 #define D_WITH_IP_ADDRESS "с IP-адресом"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Включить Веб лог уровня 2 если ожидается ответ"
 #define D_NEED_USER_AND_PASSWORD "Ожидается user=<username>&password=<password>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Проверка TLS Fingerprint..."
 #define D_TLS_CONNECT_FAILED_TO "Сбой подключения TLS к"
 #define D_RETRY_IN "Повторить"
@ -335,7 +335,7 @@
 #define D_INSECURE "Небезопасное соединение, недействительный Fingerprint"
 #define D_CONNECT_FAILED_TO "Ошибка подключения к"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast отключен"
 #define D_MULTICAST_REJOINED "Multicast (ре)соединился"
 #define D_MULTICAST_JOIN_FAILED "Multicast ошибка соединения"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST args"
 #define D_3_RESPONSE_PACKETS_SENT "3 ответных пакета получено"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz parameters"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Энергия Сегодня"
--- a/sonoff/language/uk-UK.h
+++ b/sonoff/language/uk-UK.h
@ -0,0 +1,522 @@
+/*
+  uk-UK.h - localization for Ukrainian - Ukrain for Sonoff-Tasmota
+
+  Copyright (C) 2018  Theo Arends / vadym-adik
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _LANGUAGE_UK_UK_H_
+#define _LANGUAGE_UK_UK_H_
+
+/*************************** ATTENTION *******************************\
+ *
+ * Due to memory constraints only UTF-8 is supported.
+ * To save code space keep text as short as possible.
+ * Time and Date provided by SDK can not be localized (yet).
+ * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
+ * Use online command Prefix to translate cmnd, stat and tele.
+ *
+ * Updated until v5.14.0a
+\*********************************************************************/
+
+//#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
+
+#define LANGUAGE_LCID 1058
+// HTML (ISO 639-1) Language Code
+#define D_HTML_LANGUAGE "uk"
+
+// "2017-03-07T11:08:02" - ISO8601:2004
+#define D_YEAR_MONTH_SEPARATOR "-"
+#define D_MONTH_DAY_SEPARATOR "-"
+#define D_DATE_TIME_SEPARATOR "T"
+#define D_HOUR_MINUTE_SEPARATOR ":"
+#define D_MINUTE_SECOND_SEPARATOR ":"
+
+#define D_DAY3LIST "НедПонВівСерЧетПятСуб"
+#define D_MONTH3LIST "СічЛютБерКвіТраЧерЛипВерЖовЛисГру"
+
+// Non JSON decimal separator
+#define D_DECIMAL_SEPARATOR ","
+
+// Common
+#define D_ADMIN "Admin"
+#define D_AIR_QUALITY "Якість повітря"
+#define D_AP "AP"                    // Access Point
+#define D_AS "як"
+#define D_AUTO "АВТО"
+#define D_BLINK "Блимати"
+#define D_BLINKOFF "Не блимати"
+#define D_BOOT_COUNT "Кіл-сть завант."
+#define D_BRIGHTLIGHT "Яскравість"
+#define D_BUTTON "Кнопка"
+#define D_BY "by"                    // Written by me
+#define D_BYTES "Байт"
+#define D_CELSIUS "Цельсія"
+#define D_CO2 "Вуглек. газ"
+#define D_CODE "код"                // Button code
+#define D_COLDLIGHT "Холодний"
+#define D_COMMAND "Команда"
+#define D_CONNECTED "Під'єднано"
+#define D_COUNT "Підрахунок"
+#define D_COUNTER "Лічильник"
+#define D_CURRENT "Струм"          // As in Voltage and Current
+#define D_DATA "Дані"
+#define D_DARKLIGHT "Темний"
+#define D_DEBUG "Налагодження"
+#define D_DISABLED "Заблоковано"
+#define D_DISTANCE "Дистанція"
+#define D_DNS_SERVER "DNS Сервер"
+#define D_DONE "Виконано"
+#define D_DST_TIME "Літній час"
+#define D_ECO2 "eCO2"
+#define D_EMULATION "Емуляція"
+#define D_ENABLED "Активно"
+#define D_ERASE "Стирати"
+#define D_ERROR "Помилка"
+#define D_FAHRENHEIT "Фаренгейт"
+#define D_FAILED "Невдало"
+#define D_FALLBACK "Зворотній зв'язок"
+#define D_FALLBACK_TOPIC "Топік зворотнього зв'язку"
+#define D_FALSE "Помилково"
+#define D_FILE "Файл"
+#define D_FREE_MEMORY "Вільна память"
+#define D_FREQUENCY "Частота"
+#define D_GAS "Газ"
+#define D_GATEWAY "Шлюз"
+#define D_GROUP "Група"
+#define D_HOST "Хост"
+#define D_HOSTNAME "Ім'я Хосту"
+#define D_HUMIDITY "Вологість"
+#define D_ILLUMINANCE "Освітленність"
+#define D_IMMEDIATE "негайно"      // Button immediate
+#define D_INDEX "Індекс"
+#define D_INFO "Інфо"
+#define D_INFRARED "Інфрачервоний"
+#define D_INITIALIZED "Ініціалізовано"
+#define D_IP_ADDRESS "IP Адрес"
+#define D_LIGHT "Світло"
+#define D_LWT "LWT"
+#define D_MODULE "Модуль"
+#define D_MQTT "MQTT"
+#define D_MULTI_PRESS "багаторазове натискання"
+#define D_NOISE "Шум"
+#define D_NONE "Ні"
+#define D_OFF "Вимк."
+#define D_OFFLINE "Офф-лайн"
+#define D_OK "Ок"
+#define D_ON "Увімк."
+#define D_ONLINE "Он-лайн"
+#define D_PASSWORD "Гасло"
+#define D_PORT "Порт"
+#define D_POWER_FACTOR "Коефіцієнт потужності"
+#define D_POWERUSAGE "Потужність"
+#define D_POWERUSAGE_ACTIVE "Активна потужність"
+#define D_POWERUSAGE_APPARENT "Дійсна потужність"
+#define D_POWERUSAGE_REACTIVE "Реактивна потужність"
+#define D_PRESSURE "Тиск"
+#define D_PRESSUREATSEALEVEL "Тиск на рівні моря"
+#define D_PROGRAM_FLASH_SIZE "Розмір Flash для програм"
+#define D_PROGRAM_SIZE "Розмір програм "
+#define D_PROJECT "Проект"
+#define D_RECEIVED "Отримано"
+#define D_RESTART "Перезавантаження"
+#define D_RESTARTING "Перезавантаження"
+#define D_RESTART_REASON "Причина перезавантаження"
+#define D_RESTORE "відновлення"
+#define D_RETAINED "нерозподілений"
+#define D_RULE "Правило"
+#define D_SAVE "Зберегти"
+#define D_SENSOR "Датчик"
+#define D_SSID "SSID"
+#define D_START "Старт"
+#define D_STD_TIME "STD"
+#define D_STOP "Стоп"
+#define D_SUBNET_MASK "Маска Підмережі"
+#define D_SUBSCRIBE_TO "Підписатись на"
+#define D_SUCCESSFUL "Успішно"
+#define D_SUNRISE "Схід сонця"
+#define D_SUNSET "Захід сонця"
+#define D_TEMPERATURE "Температура"
+#define D_TO "до"
+#define D_TOGGLE "Перекл."
+#define D_TOPIC "Топік"
+#define D_TRANSMIT "Передати"
+#define D_TRUE "Істина"
+#define D_TVOC "TVOC"
+#define D_UPGRADE "оновлення"
+#define D_UPLOAD "Завантажити"
+#define D_UPTIME "Час роботи"
+#define D_USER "Користувач"
+#define D_UTC_TIME "UTC"
+#define D_UV_INDEX "УФ індекс"
+#define D_UV_LEVEL "УФ рівень"
+#define D_VERSION "Версія"
+#define D_VOLTAGE "Напруга"
+#define D_WARMLIGHT "Тепло"
+#define D_WEB_SERVER "Web сервер"
+
+// sonoff.ino
+#define D_WARNING_MINIMAL_VERSION "ПОПЕРЕДЖЕННЯ! Ця версія не підтримує персистентні налаштування"
+#define D_LEVEL_10 "рівень 1-0"
+#define D_LEVEL_01 "рівень 0-1"
+#define D_SERIAL_LOGGING_DISABLED "Serial logging вимкнений"
+#define D_SYSLOG_LOGGING_REENABLED "Syslog logging увімкнений"
+
+#define D_SET_BAUDRATE_TO "Встановити швидкість передачі (Baudrate)"
+#define D_RECEIVED_TOPIC "Отриманий Топік"
+#define D_DATA_SIZE "Розмір даних"
+#define D_ANALOG_INPUT "Аналоговий вхід"
+
+// support.ino
+#define D_OSWATCH "osWatch"
+#define D_BLOCKED_LOOP "Блокуючий цикл"
+#define D_WPS_FAILED_WITH_STATUS "WPS конфігурація з статусом НЕВДАЛА"
+#define D_ACTIVE_FOR_3_MINUTES "активний протягом 3 хвилин"
+#define D_FAILED_TO_START "не вдалось запустити"
+#define D_PATCH_ISSUE_2186 "Проблема з виправленням 2186"
+#define D_CONNECTING_TO_AP "Підключення до AP"
+#define D_IN_MODE "в режимі"
+#define D_CONNECT_FAILED_NO_IP_ADDRESS "Помилка підключення, IP-адрес не отриманий"
+#define D_CONNECT_FAILED_AP_NOT_REACHED "Помилка з'єднання, AP не запущений"
+#define D_CONNECT_FAILED_WRONG_PASSWORD "Помилка з'єднання, невірне гасло до AP"
+#define D_CONNECT_FAILED_AP_TIMEOUT "Помилка з'єднання з AP по тайм-ауту"
+#define D_ATTEMPTING_CONNECTION "Спроба підключення..."
+#define D_CHECKING_CONNECTION "Перевірка з'єднання..."
+#define D_QUERY_DONE "Запит виконаний. Виявлено служби MQTT"
+#define D_MQTT_SERVICE_FOUND "MQTT сервіс знайдено"
+#define D_FOUND_AT "знайдено в"
+#define D_SYSLOG_HOST_NOT_FOUND "System лог хост не знайдено"
+
+// settings.ino
+#define D_SAVED_TO_FLASH_AT "Збережено в флэш-пам'ять"
+#define D_LOADED_FROM_FLASH_AT "Завантажено з флэш-пам'яті"
+#define D_USE_DEFAULTS "Використовувати значення за замовчуванням"
+#define D_ERASED_SECTOR "Стерти сектор"
+
+// xdrv_02_webserver.ino
+#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Прошивка MINIMAL - будь-ласка оновіть"
+#define D_WEBSERVER_ACTIVE_ON "Веб-сервер активний"
+#define D_WITH_IP_ADDRESS "з IP-адресом"
+#define D_WEBSERVER_STOPPED "Веб-сервер зупинений"
+#define D_FILE_NOT_FOUND "Файл не знайдений"
+#define D_REDIRECTED "Перенаправлено на адаптивний портал"
+#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifi менеджер встановлює Точку Доступу і зберігає параметри"
+#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifi менеджер встановив Точку Доступу"
+#define D_TRYING_TO_CONNECT "Спроба підключення пристрою до мережі"
+
+#define D_RESTART_IN "Перезавантаження"
+#define D_SECONDS "секунд"
+#define D_DEVICE_WILL_RESTART "Пристрій буде перезавантажено через декілька секунд"
+#define D_BUTTON_TOGGLE "Переключити"
+#define D_CONFIGURATION "Конфігурація"
+#define D_INFORMATION "Інформація"
+#define D_FIRMWARE_UPGRADE "Оновлення прошивки"
+#define D_CONSOLE "Консоль"
+#define D_CONFIRM_RESTART "Підтвердити перезавантаження"
+
+#define D_CONFIGURE_MODULE "Конфігурація модуля"
+#define D_CONFIGURE_WIFI "Конфігурація WiFi"
+#define D_CONFIGURE_MQTT "Конфігурація MQTT"
+#define D_CONFIGURE_DOMOTICZ "Конфігурація Domoticz"
+#define D_CONFIGURE_LOGGING "Конфігурація Логів"
+#define D_CONFIGURE_OTHER "Конфігурація інше"
+#define D_CONFIRM_RESET_CONFIGURATION "Підтвердити скидання конфігурації"
+#define D_RESET_CONFIGURATION "Скидання конфігурації"
+#define D_BACKUP_CONFIGURATION "Резервне копіювання конфігурації"
+#define D_RESTORE_CONFIGURATION "Відновлення конфігурації"
+#define D_MAIN_MENU "Головне меню"
+
+#define D_MODULE_PARAMETERS "Параметри модулю"
+#define D_MODULE_TYPE "Тип модулю"
+#define D_GPIO "GPIO"
+#define D_SERIAL_IN "Serial вхід"
+#define D_SERIAL_OUT "Serial вихід"
+
+#define D_WIFI_PARAMETERS "Параметри Wifi"
+#define D_SCAN_FOR_WIFI_NETWORKS "Сканування беспроводових мереж Wifi"
+#define D_SCAN_DONE "Сканування завершене"
+#define D_NO_NETWORKS_FOUND "Не знайдено мереж"
+#define D_REFRESH_TO_SCAN_AGAIN "Оновити для повторного сканування"
+#define D_DUPLICATE_ACCESSPOINT "Дублювати Точку Доступу (AP)"
+#define D_SKIPPING_LOW_QUALITY "Пропущено через низьку якість"
+#define D_RSSI "RSSI"
+#define D_WEP "WEP"
+#define D_WPA_PSK "WPA PSK"
+#define D_WPA2_PSK "WPA2 PSK"
+#define D_AP1_SSID "AP1 SSID"
+#define D_AP1_PASSWORD "AP1 Гасло"
+#define D_AP2_SSID "AP2 SSID"
+#define D_AP2_PASSWORD "AP2 Гасло"
+
+#define D_MQTT_PARAMETERS "Параметри MQTT"
+#define D_CLIENT "Клієнт"
+#define D_FULL_TOPIC "Повний Топік"
+
+#define D_LOGGING_PARAMETERS "Параметри логів"
+#define D_SERIAL_LOG_LEVEL "Serial лог рівень"
+#define D_WEB_LOG_LEVEL "Web лог рівень"
+#define D_SYS_LOG_LEVEL "System лог рівень"
+#define D_MORE_DEBUG "Додаткова інформація для налагодження"
+#define D_SYSLOG_HOST "System лог хост"
+#define D_SYSLOG_PORT "System лог порт"
+#define D_TELEMETRY_PERIOD "Період телеметрії"
+
+#define D_OTHER_PARAMETERS "Параметри Інше"
+#define D_WEB_ADMIN_PASSWORD "Гасло Web адміністратора"
+#define D_MQTT_ENABLE "MQTT активний"
+#define D_FRIENDLY_NAME "Дружнє Ім'я"
+#define D_BELKIN_WEMO "Belkin WeMo"
+#define D_HUE_BRIDGE "Hue Bridge"
+#define D_SINGLE_DEVICE "одиночне"
+#define D_MULTI_DEVICE "мульти"
+
+#define D_SAVE_CONFIGURATION "Зберегти конфігурацію"
+#define D_CONFIGURATION_SAVED "Конфігурація збережена "
+#define D_CONFIGURATION_RESET "Конфігурація скинута"
+
+#define D_PROGRAM_VERSION "Версія програми"
+#define D_BUILD_DATE_AND_TIME "Дата & Час збірки"
+#define D_CORE_AND_SDK_VERSION "Версія Core/SDK"
+#define D_FLASH_WRITE_COUNT "Кіл-ть записів Flash"
+#define D_MAC_ADDRESS "MAC Адрес"
+#define D_MQTT_HOST "MQTT Хост"
+#define D_MQTT_PORT "MQTT Порт"
+#define D_MQTT_CLIENT "MQTT Клієнт ID"
+#define D_MQTT_USER "MQTT Користувач"
+#define D_MQTT_TOPIC "MQTT Топік"
+#define D_MQTT_GROUP_TOPIC "MQTT Топік групи"
+#define D_MQTT_FULL_TOPIC "MQTT Топік повний"
+#define D_MDNS_DISCOVERY "mDNS Виявлення"
+#define D_MDNS_ADVERTISE "mDNS Транcляція"
+#define D_ESP_CHIP_ID "ID чипу ESP"
+#define D_FLASH_CHIP_ID "ID чипу Flash пам'яті"
+#define D_FLASH_CHIP_SIZE "Розмір Flash пам'яті"
+#define D_FREE_PROGRAM_SPACE "Вільний простір програм"
+
+#define D_UPGRADE_BY_WEBSERVER "Оновлення через Веб-сервер"
+#define D_OTA_URL "OTA Url"
+#define D_START_UPGRADE "Почати оновлення"
+#define D_UPGRADE_BY_FILE_UPLOAD "Оновлення шляхом завантаження файлів"
+#define D_UPLOAD_STARTED "Завантаження почалось"
+#define D_UPGRADE_STARTED "Оновлення почалось"
+#define D_UPLOAD_DONE "Завантаження завершено"
+#define D_UPLOAD_ERR_1 "Файл не вибраний"
+#define D_UPLOAD_ERR_2 "Недостатньо місця"
+#define D_UPLOAD_ERR_3 "Magic байт не 0xE9"
+#define D_UPLOAD_ERR_4 "Размір прошивки більше, чим реальний размір флеш пам'яті"
+#define D_UPLOAD_ERR_5 "Помилка завантаження буферу"
+#define D_UPLOAD_ERR_6 "Помилка завантаження. Увімкнено лог рівень 3"
+#define D_UPLOAD_ERR_7 "Завантаження перервано"
+#define D_UPLOAD_ERR_8 "Файл невірний"
+#define D_UPLOAD_ERR_9 "Занадто великий файл"
+#define D_UPLOAD_ERROR_CODE "Код помилки завантаження"
+
+#define D_ENTER_COMMAND "Уведіть команду"
+#define D_ENABLE_WEBLOG_FOR_RESPONSE "Увімкніть Веб лог рівня 2 якщо очікуєте відповідь"
+#define D_NEED_USER_AND_PASSWORD "Очікується user=<username>&password=<password>"
+
+// xdrv_01_mqtt.ino
+#define D_FINGERPRINT "Перевірка TLS відбитка..."
+#define D_TLS_CONNECT_FAILED_TO "Збій підключення TLS до"
+#define D_RETRY_IN "Повторити"
+#define D_VERIFIED "Перевірено відбиток"
+#define D_INSECURE "Небезпечне з'єднання, недійсний відбиток "
+#define D_CONNECT_FAILED_TO "Помилка підключення до"
+
+// xplg_wemohue.ino
+#define D_MULTICAST_DISABLED "Multicast вимкнений"
+#define D_MULTICAST_REJOINED "Multicast (пере)під'єднався"
+#define D_MULTICAST_JOIN_FAILED "Multicast помилка з'єднання"
+#define D_FAILED_TO_SEND_RESPONSE "Не вдалось відправити відповідь"
+
+#define D_WEMO "WeMo"
+#define D_WEMO_BASIC_EVENT "WeMo основна подія"
+#define D_WEMO_EVENT_SERVICE "WeMo служба подій"
+#define D_WEMO_META_SERVICE "WeMo мета-сервіс"
+#define D_WEMO_SETUP "WeMo налаштування"
+#define D_RESPONSE_SENT "Відповідь відправлена"
+
+#define D_HUE "Hue"
+#define D_HUE_BRIDGE_SETUP "Hue налаштування"
+#define D_HUE_API_NOT_IMPLEMENTED "Hue API не реалізовано"
+#define D_HUE_API "Hue API"
+#define D_HUE_POST_ARGS "Hue POST args"
+#define D_3_RESPONSE_PACKETS_SENT "3 пакету відповіді  отримано"
+
+// xdrv_07_domoticz.ino
+#define D_DOMOTICZ_PARAMETERS "Domoticz налаштування"
+#define D_DOMOTICZ_IDX "Idx"
+#define D_DOMOTICZ_KEY_IDX "Ключ idx"
+#define D_DOMOTICZ_SWITCH_IDX "Перемикач idx"
+#define D_DOMOTICZ_SENSOR_IDX "Датчик idx"
+  #define D_DOMOTICZ_TEMP "Температура"
+  #define D_DOMOTICZ_TEMP_HUM "Темп,Волог"
+  #define D_DOMOTICZ_TEMP_HUM_BARO "Темп,Волог,Тиск"
+  #define D_DOMOTICZ_POWER_ENERGY "Потуж,Енергія"
+  #define D_DOMOTICZ_ILLUMINANCE "Освітлення"
+  #define D_DOMOTICZ_COUNT "Лічильник/PM1"
+  #define D_DOMOTICZ_VOLTAGE "Напруга/PM2,5"
+  #define D_DOMOTICZ_CURRENT "Струм/PM10"
+  #define D_DOMOTICZ_AIRQUALITY "Якість повітря"
+#define D_DOMOTICZ_UPDATE_TIMER "Оновлення таймерів"
+
+// xdrv_09_timers.ino
+#define D_CONFIGURE_TIMER "Конфігурація таймеру"
+#define D_TIMER_PARAMETERS "Налаштування таймеру"
+#define D_TIMER_ARM "Увімкнений"
+#define D_TIMER_TIME "Час"
+#define D_TIMER_DAYS "Дні"
+#define D_TIMER_REPEAT "Повтор"
+#define D_TIMER_OUTPUT "Вихід"
+#define D_TIMER_ACTION "Дія"
+
+// xdrv_10_knx.ino
+#define D_CONFIGURE_KNX "Конфігурація KNX"
+#define D_KNX_PARAMETERS "Налаштування KNX"
+#define D_KNX_GENERAL_CONFIG "Основні"
+#define D_KNX_PHYSICAL_ADDRESS "Фізична адреса"
+#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Має бути унікальним у мережі KNX)"
+#define D_KNX_ENABLE "Увімкнений KNX"
+#define D_KNX_GROUP_ADDRESS_TO_WRITE "Дані для запису групових адрес"
+#define D_ADD "Додати"
+#define D_DELETE "Видалити"
+#define D_REPLY "Повторити"
+#define D_KNX_GROUP_ADDRESS_TO_READ "Дані для читання групових адрес"
+#define D_LOG_KNX "KNX: "
+#define D_RECEIVED_FROM "Отримати з"
+#define D_KNX_COMMAND_WRITE "Записати"
+#define D_KNX_COMMAND_READ "Читати"
+#define D_KNX_COMMAND_OTHER "Інше"
+#define D_SENT_TO "надіслати до"
+#define D_KNX_WARNING "Адреса групи (0/0/0) зарезервована і не може бути використана."
+#define D_KNX_ENHANCEMENT "Підвищення зв'язку"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"
+
+// xdrv_03_energy.ino
+#define D_ENERGY_TODAY "Енергія Сьогодні"
+#define D_ENERGY_YESTERDAY "Енергія Вчора"
+#define D_ENERGY_TOTAL "Енергія Всього"
+
+// xsns_05_ds18b20.ino
+#define D_SENSOR_BUSY "Датчик DS18x20 занятий"
+#define D_SENSOR_CRC_ERROR "Датчик DS18x20 - помилка CRC"
+#define D_SENSORS_FOUND "Датчик DS18x20 знайдено"
+
+// xsns_06_dht.ino
+#define D_TIMEOUT_WAITING_FOR "Тайм-аут, в очікуванні"
+#define D_START_SIGNAL_LOW "стартовий сигнал низький"
+#define D_START_SIGNAL_HIGH "стартовий сигнал високий"
+#define D_PULSE "імпульс"
+#define D_CHECKSUM_FAILURE "Помилка контрольної суми"
+
+// xsns_07_sht1x.ino
+#define D_SENSOR_DID_NOT_ACK_COMMAND "Датчик не отримав команду ACK"
+#define D_SHT1X_FOUND "SHT1X знайдено"
+
+// xsns_18_pms5003.ino
+#define D_STANDARD_CONCENTRATION "CF-1 PM"     // Standard Particle CF-1 Particle Matter
+#define D_ENVIRONMENTAL_CONCENTRATION "PM"     // Environmetal Particle Matter
+#define D_PARTICALS_BEYOND "Через Частини"
+
+// sonoff_template.h
+#define D_SENSOR_NONE     "-відсутньо-"
+#define D_SENSOR_DHT11    "DHT11"
+#define D_SENSOR_AM2301   "AM2301"
+#define D_SENSOR_SI7021   "SI7021"
+#define D_SENSOR_DS18X20  "DS18x20"
+#define D_SENSOR_I2C_SCL  "I2C SCL"
+#define D_SENSOR_I2C_SDA  "I2C SDA"
+#define D_SENSOR_WS2812   "WS2812"
+#define D_SENSOR_IRSEND   "IRsend"
+#define D_SENSOR_SWITCH   "Перемикач"   // Suffix "1"
+#define D_SENSOR_BUTTON   "Кнопка"   // Suffix "1"
+#define D_SENSOR_RELAY    "Реле"    // Suffix "1i"
+#define D_SENSOR_LED      "Led"      // Suffix "1i"
+#define D_SENSOR_PWM      "PWM"      // Suffix "1"
+#define D_SENSOR_COUNTER  "Лічильник"  // Suffix "1"
+#define D_SENSOR_IRRECV   "IRrecv"
+#define D_SENSOR_MHZ_RX   "MHZ Rx"
+#define D_SENSOR_MHZ_TX   "MHZ Tx"
+#define D_SENSOR_PZEM_RX  "PZEM Rx"
+#define D_SENSOR_PZEM_TX  "PZEM Tx"
+#define D_SENSOR_SAIR_RX  "SAir Rx"
+#define D_SENSOR_SAIR_TX  "SAir Tx"
+#define D_SENSOR_SPI_CS   "SPI CS"
+#define D_SENSOR_SPI_DC   "SPI DC"
+#define D_SENSOR_BACKLIGHT "BkLight"
+#define D_SENSOR_PMS5003  "PMS5003"
+#define D_SENSOR_SDS0X1   "SDS0X1"
+#define D_SENSOR_SBR_RX   "SerBr Rx"
+#define D_SENSOR_SBR_TX   "SerBr Tx"
+#define D_SENSOR_SR04_TRIG "SR04 Tri"
+#define D_SENSOR_SR04_ECHO "SR04 Ech"
+#define D_SENSOR_SDM120_TX "SDM120 Tx"
+#define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
+
+// Units
+#define D_UNIT_AMPERE "А"
+#define D_UNIT_CENTIMETER "cм"
+#define D_UNIT_HERTZ "Гц"
+#define D_UNIT_HOUR "Г"
+#define D_UNIT_KILOOHM "кОм"
+#define D_UNIT_KILOWATTHOUR "кВт"
+#define D_UNIT_LUX "лк"
+#define D_UNIT_MICROGRAM_PER_CUBIC_METER "мкг/м3"
+#define D_UNIT_MICROMETER "мкм"
+#define D_UNIT_MICROSECOND "мкс"
+#define D_UNIT_MILLIAMPERE "мА"
+#define D_UNIT_MILLISECOND "мс"
+#define D_UNIT_MINUTE "хв"
+#define D_UNIT_PARTS_PER_BILLION "ppb"
+#define D_UNIT_PARTS_PER_DECILITER "ppd"
+#define D_UNIT_PARTS_PER_MILLION "ppm"
+#define D_UNIT_PRESSURE "гПа"
+#define D_UNIT_SECOND "сек"
+#define D_UNIT_SECTORS "секторів"
+#define D_UNIT_VA "ВA"
+#define D_UNIT_VAR "VAr"
+#define D_UNIT_VOLT "В"
+#define D_UNIT_WATT "Вт"
+#define D_UNIT_WATTHOUR "ВтГод"
+
+// Log message prefix
+#define D_LOG_APPLICATION "APP: "  // Application
+#define D_LOG_BRIDGE "BRG: "       // Bridge
+#define D_LOG_CONFIG "CFG: "       // Settings
+#define D_LOG_COMMAND "CMD: "      // Command
+#define D_LOG_DEBUG "DBG: "        // Debug
+#define D_LOG_DHT "DHT: "          // DHT sensor
+#define D_LOG_DOMOTICZ "DOM: "     // Domoticz
+#define D_LOG_DSB "DSB: "          // DS18xB20 sensor
+#define D_LOG_HTTP "HTP: "         // HTTP webserver
+#define D_LOG_I2C "I2C: "          // I2C
+#define D_LOG_IRR "IRR: "          // Infra Red Received
+#define D_LOG_LOG "LOG: "          // Logging
+#define D_LOG_MODULE "MOD: "       // Module
+#define D_LOG_MDNS "DNS: "         // mDNS
+#define D_LOG_MQTT "MQT: "         // MQTT
+#define D_LOG_OTHER "OTH: "        // Other
+#define D_LOG_RESULT "RSL: "       // Result
+#define D_LOG_RFR "RFR: "          // RF Received
+#define D_LOG_SERIAL "SER: "       // Serial
+#define D_LOG_SHT1 "SHT: "         // SHT1x sensor
+#define D_LOG_UPLOAD "UPL: "       // Upload
+#define D_LOG_UPNP "UPP: "         // UPnP
+#define D_LOG_WIFI "WIF: "         // Wifi
+
+#endif // _LANGUAGE_UK_UK_H_
--- a/sonoff/language/zh-CN.h
+++ b/sonoff/language/zh-CN.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "使用默认设置"
 #define D_ERASED_SECTOR "擦除删除"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "固件版本过低 - 请升级"
 #define D_WEBSERVER_ACTIVE_ON "Web服务器:"
 #define D_WITH_IP_ADDRESS "IP地址:"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "如果预期响应，则启用Weblog 2"
 #define D_NEED_USER_AND_PASSWORD "需要 user=<用户名>&password=<密码>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "验证 TLS 指纹..."
 #define D_TLS_CONNECT_FAILED_TO "TLS 连接失败"
 #define D_RETRY_IN "重试倒计时:"
@ -335,7 +335,7 @@
 #define D_INSECURE "指纹无效导致连接不安全"
 #define D_CONNECT_FAILED_TO "连接失败:"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "组播已禁用"
 #define D_MULTICAST_REJOINED "组播已(重新)加入"
 #define D_MULTICAST_JOIN_FAILED "组播加入失败"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST 参数"
 #define D_3_RESPONSE_PACKETS_SENT "3 请求包发送"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz 设置"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "今日用电量"
--- a/sonoff/language/zh-TW.h
+++ b/sonoff/language/zh-TW.h
@ -205,7 +205,7 @@
 #define D_USE_DEFAULTS "使用默認設置"
 #define D_ERASED_SECTOR "擦除刪除"

-// webserver.ino
+// xdrv_02_webserver.ino
 #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "固件版本過低 - 請升級"
 #define D_WEBSERVER_ACTIVE_ON "Web服務器:"
 #define D_WITH_IP_ADDRESS "IP地址:"
@ -327,7 +327,7 @@
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "如果預期響應，則啟用Weblog 2"
 #define D_NEED_USER_AND_PASSWORD "需要 user=<用戶名>&password=<密碼>"

-// xdrv_00_mqtt.ino
+// xdrv_01_mqtt.ino
 #define D_FINGERPRINT "驗證 TLS 指紋..."
 #define D_TLS_CONNECT_FAILED_TO "TLS 連接失敗"
 #define D_RETRY_IN "重試倒計時:"
@ -335,7 +335,7 @@
 #define D_INSECURE "指紋無效導致連接不安全"
 #define D_CONNECT_FAILED_TO "連接失敗:"

-// xdrv_wemohue.ino
+// xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "組播已禁用"
 #define D_MULTICAST_REJOINED "組播已(重新)加入"
 #define D_MULTICAST_JOIN_FAILED "組播加入失敗"
@ -355,7 +355,7 @@
 #define D_HUE_POST_ARGS "Hue POST 參數"
 #define D_3_RESPONSE_PACKETS_SENT "3 請求包發送"

-// xdrv_05_domoticz.ino
+// xdrv_07_domoticz.ino
 #define D_DOMOTICZ_PARAMETERS "Domoticz 設置"
 #define D_DOMOTICZ_IDX "Idx"
 #define D_DOMOTICZ_KEY_IDX "Key idx"
@ -402,6 +402,8 @@
 #define D_SENT_TO "sent to"
 #define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
 #define D_KNX_ENHANCEMENT "Communication Enhancement"
+#define D_KNX_TX_SLOT "KNX TX"
+#define D_KNX_RX_SLOT "KNX RX"

 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "今日用電量"
--- a/sonoff/sonoff.h
+++ b/sonoff/sonoff.h
@ -137,7 +137,7 @@ typedef unsigned long power_t;              // Power (Relay) type
 #define DAWN_NAUTIC            -12.0
 #define DAWN_ASTRONOMIC        -18.0

-// Sensor definition for KNX Driver
+// Sensor and Commands definition for KNX Driver
 #define KNX_TEMPERATURE        17
 #define KNX_HUMIDITY           18
 #define KNX_ENERGY_VOLTAGE     19
@ -147,7 +147,13 @@ typedef unsigned long power_t;              // Power (Relay) type
 #define KNX_ENERGY_DAILY       23
 #define KNX_ENERGY_START       24
 #define KNX_ENERGY_TOTAL       25
-#define KNX_MAX_device_param   25
+#define KNX_SLOT1              26
+#define KNX_SLOT2              27
+#define KNX_SLOT3              28
+#define KNX_SLOT4              29
+#define KNX_SLOT5              30
+#define KNX_MAX_device_param   30
+#define MAX_KNXTX_CMNDS        5

 /*********************************************************************************************\
 * Enumeration
@ -192,6 +198,10 @@ enum XsnsFunctions {FUNC_INIT, FUNC_LOOP, FUNC_EVERY_50_MSECOND, FUNC_EVERY_SECO

 const uint8_t kDefaultRfCode[9] PROGMEM = { 0x21, 0x16, 0x01, 0x0E, 0x03, 0x48, 0x2E, 0x1A, 0x00 };

+enum CommandSource { SRC_IGNORE, SRC_MQTT, SRC_RESTART, SRC_BUTTON, SRC_SWITCH, SRC_BACKLOG, SRC_SERIAL, SRC_WEBGUI, SRC_WEBCOMMAND, SRC_WEBCONSOLE, SRC_PULSETIMER,
+                     SRC_TIMER, SRC_RULE, SRC_MAXPOWER, SRC_MAXENERGY, SRC_LIGHT, SRC_KNX, SRC_DISPLAY, SRC_WEMO, SRC_HUE, SRC_MAX };
+const char kCommandSource[] PROGMEM = "I|MQTT|Restart|Button|Switch|Backlog|Serial|WebGui|WebCommand|WebConsole|PulseTimer|Timer|Rule|MaxPower|MaxEnergy|Light|Knx|Display|Wemo|Hue";
+
 /*********************************************************************************************\
 * Extern global variables
 \*********************************************************************************************/
--- a/sonoff/sonoff.ino
+++ b/sonoff/sonoff.ino
@ -82,7 +82,7 @@ enum TasmotaCommands {
  CMND_GPIO, CMND_GPIOS, CMND_PWM, CMND_PWMFREQUENCY, CMND_PWMRANGE, CMND_COUNTER, CMND_COUNTERTYPE,
  CMND_COUNTERDEBOUNCE, CMND_SLEEP, CMND_UPGRADE, CMND_UPLOAD, CMND_OTAURL, CMND_SERIALLOG, CMND_SYSLOG,
  CMND_LOGHOST, CMND_LOGPORT, CMND_IPADDRESS, CMND_NTPSERVER, CMND_AP, CMND_SSID, CMND_PASSWORD, CMND_HOSTNAME,
-  CMND_WIFICONFIG, CMND_FRIENDLYNAME, CMND_SWITCHMODE, CMND_WEBSERVER, CMND_WEBPASSWORD, CMND_WEBLOG, CMND_EMULATION,
+  CMND_WIFICONFIG, CMND_FRIENDLYNAME, CMND_SWITCHMODE,
  CMND_TELEPERIOD, CMND_RESTART, CMND_RESET, CMND_TIMEZONE, CMND_TIMESTD, CMND_TIMEDST, CMND_ALTITUDE, CMND_LEDPOWER, CMND_LEDSTATE,
  CMND_I2CSCAN, CMND_SERIALSEND, CMND_BAUDRATE, CMND_SERIALDELIMITER };
 const char kTasmotaCommands[] PROGMEM =
@ -92,7 +92,7 @@ const char kTasmotaCommands[] PROGMEM =
  D_CMND_GPIO "|" D_CMND_GPIOS "|" D_CMND_PWM "|" D_CMND_PWMFREQUENCY "|" D_CMND_PWMRANGE "|" D_CMND_COUNTER "|"  D_CMND_COUNTERTYPE "|"
  D_CMND_COUNTERDEBOUNCE "|" D_CMND_SLEEP "|" D_CMND_UPGRADE "|" D_CMND_UPLOAD "|" D_CMND_OTAURL "|" D_CMND_SERIALLOG "|" D_CMND_SYSLOG "|"
  D_CMND_LOGHOST "|" D_CMND_LOGPORT "|" D_CMND_IPADDRESS "|" D_CMND_NTPSERVER "|" D_CMND_AP "|" D_CMND_SSID "|" D_CMND_PASSWORD "|" D_CMND_HOSTNAME "|"
-  D_CMND_WIFICONFIG "|" D_CMND_FRIENDLYNAME "|" D_CMND_SWITCHMODE "|" D_CMND_WEBSERVER "|" D_CMND_WEBPASSWORD "|" D_CMND_WEBLOG "|" D_CMND_EMULATION "|"
+  D_CMND_WIFICONFIG "|" D_CMND_FRIENDLYNAME "|" D_CMND_SWITCHMODE "|"
  D_CMND_TELEPERIOD "|" D_CMND_RESTART "|" D_CMND_RESET "|" D_CMND_TIMEZONE "|" D_CMND_TIMESTD "|" D_CMND_TIMEDST "|" D_CMND_ALTITUDE "|" D_CMND_LEDPOWER "|" D_CMND_LEDSTATE "|"
  D_CMND_I2CSCAN "|" D_CMND_SERIALSEND "|" D_CMND_BAUDRATE "|" D_CMND_SERIALDELIMITER;

@ -304,10 +304,12 @@ void SetLatchingRelay(power_t power, uint8_t state)
  }
 }

-void SetDevicePower(power_t rpower)
+void SetDevicePower(power_t rpower, int source)
 {
  uint8_t state;

+  ShowSource(source);
+
  if (POWER_ALL_ALWAYS_ON == Settings.poweronstate) {  // All on and stay on
    power = (1 << devices_present) -1;
    rpower = power;
@ -396,6 +398,8 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
  memcpy(dataBuf, data +i, sizeof(dataBuf));
  dataBuf[sizeof(dataBuf)-1] = 0;

+  if (topicBuf[0] != '/') { ShowSource(SRC_MQTT); }
+
  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_RESULT D_RECEIVED_TOPIC " %s, " D_DATA_SIZE " %d, " D_DATA " %s"),
    topicBuf, data_len, dataBuf);
  AddLog(LOG_LEVEL_DEBUG_MORE);
@ -490,7 +494,7 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
    else if ((CMND_POWER == command_code) && (index > 0) && (index <= devices_present)) {
      if ((payload < 0) || (payload > 4)) payload = 9;
 //      Settings.flag.device_index_enable = user_append_index;
-      ExecuteCommandPower(index, payload);
+      ExecuteCommandPower(index, payload, SRC_IGNORE);
      fallback_topic_flag = 0;
      return;
    }
@ -516,7 +520,7 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
        Settings.poweronstate = payload;
        if (POWER_ALL_ALWAYS_ON == Settings.poweronstate) {
          for (byte i = 1; i <= devices_present; i++) {
-            ExecuteCommandPower(i, POWER_ON);
+            ExecuteCommandPower(i, POWER_ON, SRC_IGNORE);
          }
        }
      }
@ -980,38 +984,6 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
      if ((payload >= 0) && (payload < MAX_SWITCH_OPTION)) Settings.switchmode[index -1] = payload;
      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_NVALUE, command, index, Settings.switchmode[index-1]);
    }
-#ifdef USE_WEBSERVER
-    else if (CMND_WEBSERVER == command_code) {
-      if ((payload >= 0) && (payload <= 2)) Settings.webserver = payload;
-      if (Settings.webserver) {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_WEBSERVER "\":\"" D_JSON_ACTIVE_FOR " %s " D_JSON_ON_DEVICE " %s " D_JSON_WITH_IP_ADDRESS " %s\"}"),
-          (2 == Settings.webserver) ? D_ADMIN : D_USER, my_hostname, WiFi.localIP().toString().c_str());
-      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, GetStateText(0));
-      }
-    }
-    else if (CMND_WEBPASSWORD == command_code) {
-      if ((data_len > 0) && (data_len < sizeof(Settings.web_password))) {
-        strlcpy(Settings.web_password, (!strcmp(dataBuf,"0")) ? "" : (1 == payload) ? WEB_PASSWORD : dataBuf, sizeof(Settings.web_password));
-        snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.web_password);
-      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_ASTERIX, command);
-      }
-    }
-    else if (CMND_WEBLOG == command_code) {
-      if ((payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) Settings.weblog_level = payload;
-      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.weblog_level);
-    }
-#ifdef USE_EMULATION
-    else if (CMND_EMULATION == command_code) {
-      if ((payload >= EMUL_NONE) && (payload < EMUL_MAX)) {
-        Settings.flag2.emulation = payload;
-        restart_flag = 2;
-      }
-      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.emulation);
-    }
-#endif  // USE_EMULATION
-#endif  // USE_WEBSERVER
    else if (CMND_TELEPERIOD == command_code) {
      if ((payload >= 0) && (payload < 3601)) {
        Settings.tele_period = (1 == payload) ? TELE_PERIOD : payload;
@ -1187,7 +1159,7 @@ boolean SendKey(byte key, byte device, byte state)
  return result;
 }

-void ExecuteCommandPower(byte device, byte state)
+void ExecuteCommandPower(byte device, byte state, int source)
 {
 // device  = Relay number 1 and up
 // state 0 = Relay Off
@ -1199,6 +1171,8 @@ void ExecuteCommandPower(byte device, byte state)
 // state 7 = Relay On and no publishPowerState
 // state 9 = Show power state

+//  ShowSource(source);
+
  uint8_t publish_power = 1;
  if ((POWER_OFF_NO_STATE == state) || (POWER_ON_NO_STATE == state)) {
    state &= 1;
@ -1216,7 +1190,7 @@ void ExecuteCommandPower(byte device, byte state)
      interlock_mutex = 1;
      for (byte i = 0; i < devices_present; i++) {
        power_t imask = 1 << i;
-        if ((power & imask) && (mask != imask)) ExecuteCommandPower(i +1, POWER_OFF);
+        if ((power & imask) && (mask != imask)) ExecuteCommandPower(i +1, POWER_OFF, SRC_IGNORE);
      }
      interlock_mutex = 0;
    }
@ -1230,7 +1204,7 @@ void ExecuteCommandPower(byte device, byte state)
    case POWER_TOGGLE:
      power ^= mask;
    }
-    SetDevicePower(power);
+    SetDevicePower(power, source);
 #ifdef USE_DOMOTICZ
    DomoticzUpdatePowerState(device);
 #endif  // USE_DOMOTICZ
@ -1257,7 +1231,7 @@ void ExecuteCommandPower(byte device, byte state)
    byte flag = (blink_mask & mask);
    blink_mask &= (POWER_MASK ^ mask);  // Clear device mask
    MqttPublishPowerBlinkState(device);
-    if (flag) ExecuteCommandPower(device, (blink_powersave >> (device -1))&1);  // Restore state
+    if (flag) ExecuteCommandPower(device, (blink_powersave >> (device -1))&1, SRC_IGNORE);  // Restore state
    return;
  }
  if (publish_power) MqttPublishPowerState(device);
@ -1272,18 +1246,20 @@ void StopAllPowerBlink()
    if (blink_mask & mask) {
      blink_mask &= (POWER_MASK ^ mask);  // Clear device mask
      MqttPublishPowerBlinkState(i);
-      ExecuteCommandPower(i, (blink_powersave >> (i -1))&1);  // Restore state
+      ExecuteCommandPower(i, (blink_powersave >> (i -1))&1, SRC_IGNORE);  // Restore state
    }
  }
 }

-void ExecuteCommand(char *cmnd)
+void ExecuteCommand(char *cmnd, int source)
 {
  char stopic[CMDSZ];
  char svalue[INPUT_BUFFER_SIZE];
  char *start;
  char *token;

+  ShowSource(source);
+
  token = strtok(cmnd, " ");
  if (token != NULL) {
    start = strrchr(token, '/');   // Skip possible cmnd/sonoff/ preamble
@ -1582,7 +1558,7 @@ void ButtonHandler()
        }
        if (button_pressed) {
          if (!SendKey(0, button_index +1, POWER_TOGGLE)) {  // Execute Toggle command via MQTT if ButtonTopic is set
-            ExecuteCommandPower(button_index +1, POWER_TOGGLE);  // Execute Toggle command internally
+            ExecuteCommandPower(button_index +1, POWER_TOGGLE, SRC_BUTTON);  // Execute Toggle command internally
          }
        }
      } else {
@ -1591,7 +1567,7 @@ void ButtonHandler()
            snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_IMMEDIATE), button_index +1);
            AddLog(LOG_LEVEL_DEBUG);
            if (!SendKey(0, button_index +1, POWER_TOGGLE)) {  // Execute Toggle command via MQTT if ButtonTopic is set
-              ExecuteCommandPower(button_index +1, POWER_TOGGLE);  // Execute Toggle command internally
+              ExecuteCommandPower(button_index +1, POWER_TOGGLE, SRC_BUTTON);  // Execute Toggle command internally
            }
          } else {
            multipress[button_index] = (multiwindow[button_index]) ? multipress[button_index] +1 : 1;
@ -1610,7 +1586,7 @@ void ButtonHandler()
            if (holdbutton[button_index] == Settings.param[P_HOLD_TIME] * (STATES / 10) * hold_time_extent) {  // Button held for factor times longer
 //              Settings.flag.button_single = 0;
              snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_SETOPTION "13 0"));  // Disable single press only
-              ExecuteCommand(scmnd);
+              ExecuteCommand(scmnd, SRC_BUTTON);
            }
          } else {
            if (Settings.flag.button_restrict) {   // Button restriction
@ -1622,7 +1598,7 @@ void ButtonHandler()
              if (holdbutton[button_index] == (Settings.param[P_HOLD_TIME] * (STATES / 10)) * hold_time_extent) {  // Button held for factor times longer
                multipress[button_index] = 0;
                snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_RESET " 1"));
-                ExecuteCommand(scmnd);
+                ExecuteCommand(scmnd, SRC_BUTTON);
              }
            }
          }
@ -1649,12 +1625,12 @@ void ButtonHandler()
                  if (WifiState()) {                  // WPSconfig, Smartconfig or Wifimanager active
                    restart_flag = 1;
                  } else {
-                    ExecuteCommandPower(button_index + multipress[button_index], POWER_TOGGLE);  // Execute Toggle command internally
+                    ExecuteCommandPower(button_index + multipress[button_index], POWER_TOGGLE, SRC_BUTTON);  // Execute Toggle command internally
                  }
                } else {                              // 3 - 7 press
                  if (!Settings.flag.button_restrict) {
                    snprintf_P(scmnd, sizeof(scmnd), kCommands[multipress[button_index] -3]);
-                    ExecuteCommand(scmnd);
+                    ExecuteCommand(scmnd, SRC_BUTTON);
                  }
                }
              }
@ -1737,7 +1713,7 @@ void SwitchHandler()

        if (switchflag < 3) {
          if (!SendKey(1, i +1, switchflag)) {  // Execute command via MQTT
-            ExecuteCommandPower(i +1, switchflag);        // Execute command internally (if i < devices_present)
+            ExecuteCommandPower(i +1, switchflag, SRC_SWITCH);        // Execute command internally (if i < devices_present)
          }
        }

@ -1784,8 +1760,8 @@ void StateLoop()
      if ((pulse_timer[i] > 0) && (pulse_timer[i] < 112)) {
        pulse_timer[i]--;
        if (!pulse_timer[i]) {
-//          ExecuteCommandPower(i +1, POWER_OFF);
-          ExecuteCommandPower(i +1, (POWER_ALL_OFF_PULSETIME_ON == Settings.poweronstate) ? POWER_ON : POWER_OFF);
+//          ExecuteCommandPower(i +1, POWER_OFF, SRC_PULSETIMER);
+          ExecuteCommandPower(i +1, (POWER_ALL_OFF_PULSETIME_ON == Settings.poweronstate) ? POWER_ON : POWER_OFF, SRC_PULSETIMER);
        }
      }
    }
@ -1800,7 +1776,7 @@ void StateLoop()
        } else {
          blink_power ^= 1;
          power_now = (power & (POWER_MASK ^ blink_mask)) | ((blink_power) ? blink_mask : 0);
-          SetDevicePower(power_now);
+          SetDevicePower(power_now, SRC_IGNORE);
        }
      }
    }
@ -1809,7 +1785,7 @@ void StateLoop()
    if (backlog_delay) backlog_delay--;
    if ((backlog_pointer != backlog_index) && !backlog_delay && !backlog_mutex) {
      backlog_mutex = 1;
-      ExecuteCommand((char*)backlog[backlog_pointer].c_str());
+      ExecuteCommand((char*)backlog[backlog_pointer].c_str(), SRC_BACKLOG);
      backlog_mutex = 0;
      backlog_pointer++;
      if (backlog_pointer >= MAX_BACKLOG) backlog_pointer = 0;
@ -2154,7 +2130,7 @@ void SerialInput()
      seriallog_level = (Settings.seriallog_level < LOG_LEVEL_INFO) ? (byte)LOG_LEVEL_INFO : Settings.seriallog_level;
      snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_COMMAND "%s"), serial_in_buffer);
      AddLog(LOG_LEVEL_INFO);
-      ExecuteCommand(serial_in_buffer);
+      ExecuteCommand(serial_in_buffer, SRC_SERIAL);
      serial_in_byte_counter = 0;
      serial_polling_window = 0;
      Serial.flush();
@ -2411,36 +2387,36 @@ void setup()

  if (MOTOR == Settings.module) Settings.poweronstate = POWER_ALL_ON;  // Needs always on else in limbo!
  if (POWER_ALL_ALWAYS_ON == Settings.poweronstate) {
-    SetDevicePower(1);
+    SetDevicePower(1, SRC_RESTART);
  } else {
    if ((resetInfo.reason == REASON_DEFAULT_RST) || (resetInfo.reason == REASON_EXT_SYS_RST)) {
      switch (Settings.poweronstate) {
      case POWER_ALL_OFF:
      case POWER_ALL_OFF_PULSETIME_ON:
        power = 0;
-        SetDevicePower(power);
+        SetDevicePower(power, SRC_RESTART);
        break;
      case POWER_ALL_ON:  // All on
        power = (1 << devices_present) -1;
-        SetDevicePower(power);
+        SetDevicePower(power, SRC_RESTART);
        break;
      case POWER_ALL_SAVED_TOGGLE:
        power = (Settings.power & ((1 << devices_present) -1)) ^ POWER_MASK;
        if (Settings.flag.save_state) {
-          SetDevicePower(power);
+          SetDevicePower(power, SRC_RESTART);
        }
        break;
      case POWER_ALL_SAVED:
        power = Settings.power & ((1 << devices_present) -1);
        if (Settings.flag.save_state) {
-          SetDevicePower(power);
+          SetDevicePower(power, SRC_RESTART);
        }
        break;
      }
    } else {
      power = Settings.power & ((1 << devices_present) -1);
      if (Settings.flag.save_state) {
-        SetDevicePower(power);
+        SetDevicePower(power, SRC_RESTART);
      }
    }
  }
@ -2480,13 +2456,6 @@ void loop()

  OsWatchLoop();

-#ifdef USE_WEBSERVER
-  PollDnsWebserver();
-#ifdef USE_EMULATION
-  if (Settings.flag2.emulation) PollUdp();
-#endif  // USE_EMULATION
-#endif  // USE_WEBSERVER
-
  if (millis() >= state_loop_timer) StateLoop();

  if (!serial_local) SerialInput();
--- a/sonoff/support.ino
+++ b/sonoff/support.ino
@ -244,6 +244,29 @@ char* LTrim(char* p)
  return p;
 }

+char* RTrim(char* p)
+{
+  char* q = p + strlen(p) -1;
+  while ((q >= p) && (isblank(*q))) {
+    q--;                                     // Trim trailing spaces
+  }
+  q++;
+  *q = '\0';
+  return p;
+}
+
+char* Trim(char* p)
+{
+  if (*p == '\0') { return p; }
+  while (isspace(*p)) { p++; }            // Trim leading spaces
+  if (*p == '\0') { return p; }
+  char* q = p + strlen(p) -1;
+  while (isspace(*q) && q >= p) { q--; }  // Trim trailing spaces
+  q++;
+  *q = '\0';
+  return p;
+}
+
 char* NoAlNumToUnderscore(char* dest, const char* source)
 {
  char* write = dest;
@ -606,6 +629,15 @@ uint32_t GetHash(const char *buffer, size_t size)
  return hash;
 }

+void ShowSource(int source)
+{
+  if ((source > 0) && (source < SRC_MAX)) {
+    char stemp1[20];
+    snprintf_P(log_data, sizeof(log_data), PSTR("SRC: %s"), GetTextIndexed(stemp1, sizeof(stemp1), source, kCommandSource));
+    AddLog(LOG_LEVEL_DEBUG);
+  }
+}
+
 /*********************************************************************************************\
 * Fill feature list
 \*********************************************************************************************/
@ -633,52 +665,52 @@ void GetFeatures()
  feature_drv1 |= 0x00000040;  // sonoff.ino
 #endif
 #ifdef USE_WEBSERVER
-  feature_drv1 |= 0x00000080;  // webserver.ino
+  feature_drv1 |= 0x00000080;  // xdrv_02_webserver.ino
 #endif
 #ifdef WEBSERVER_ADVERTISE
-  feature_drv1 |= 0x00000100;  // webserver.ino
+  feature_drv1 |= 0x00000100;  // xdrv_02_webserver.ino
 #endif
 #ifdef USE_EMULATION
  feature_drv1 |= 0x00000200;  // xplg_wemohue.ino
 #endif
 #if (MQTT_LIBRARY_TYPE == MQTT_PUBSUBCLIENT)
-  feature_drv1 |= 0x00000400;  // xdrv_00_mqtt.ino
+  feature_drv1 |= 0x00000400;  // xdrv_01_mqtt.ino
 #endif
 #if (MQTT_LIBRARY_TYPE == MQTT_TASMOTAMQTT)
-  feature_drv1 |= 0x00000800;  // xdrv_00_mqtt.ino
+  feature_drv1 |= 0x00000800;  // xdrv_01_mqtt.ino
 #endif
 #if (MQTT_LIBRARY_TYPE == MQTT_ESPMQTTARDUINO)
-  feature_drv1 |= 0x00001000;  // xdrv_00_mqtt.ino
+  feature_drv1 |= 0x00001000;  // xdrv_01_mqtt.ino
 #endif
 #ifdef MQTT_HOST_DISCOVERY
-  feature_drv1 |= 0x00002000;  // xdrv_00_mqtt.ino
+  feature_drv1 |= 0x00002000;  // xdrv_01_mqtt.ino
 #endif
 #ifdef USE_ARILUX_RF
-  feature_drv1 |= 0x00004000;  // xdrv_01_light.ino
+  feature_drv1 |= 0x00004000;  // xdrv_04_light.ino
 #endif
 #ifdef USE_WS2812
-  feature_drv1 |= 0x00008000;  // xdrv_01_light.ino
+  feature_drv1 |= 0x00008000;  // xdrv_04_light.ino
 #endif
 #ifdef USE_WS2812_DMA
-  feature_drv1 |= 0x00010000;  // xdrv_01_light.ino
+  feature_drv1 |= 0x00010000;  // xdrv_04_light.ino
 #endif
 #ifdef USE_IR_REMOTE
-  feature_drv1 |= 0x00020000;  // xdrv_02_irremote.ino
+  feature_drv1 |= 0x00020000;  // xdrv_05_irremote.ino
 #endif
 #ifdef USE_IR_HVAC
-  feature_drv1 |= 0x00040000;  // xdrv_02_irremote.ino
+  feature_drv1 |= 0x00040000;  // xdrv_05_irremote.ino
 #endif
 #ifdef USE_IR_RECEIVE
-  feature_drv1 |= 0x00080000;  // xdrv_02_irremote.ino
+  feature_drv1 |= 0x00080000;  // xdrv_05_irremote.ino
 #endif
 #ifdef USE_DOMOTICZ
-  feature_drv1 |= 0x00100000;  // xdrv_05_domoticz.ino
+  feature_drv1 |= 0x00100000;  // xdrv_07_domoticz.ino
 #endif
 #ifdef USE_DISPLAY
-  feature_drv1 |= 0x00200000;  // xdrv_06_display.ino
+  feature_drv1 |= 0x00200000;  // xdrv_98_display.ino
 #endif
 #ifdef USE_HOME_ASSISTANT
-  feature_drv1 |= 0x00400000;  // xdrv_07_home_assistant.ino
+  feature_drv1 |= 0x00400000;  // xdrv_12_home_assistant.ino
 #endif
 #ifdef USE_SERIAL_BRIDGE
  feature_drv1 |= 0x00800000;  // xdrv_08_serial_bridge.ino
@ -1141,7 +1173,7 @@ void WifiCheck(uint8_t param)
          StartWebserver(Settings.webserver, WiFi.localIP());
 #ifdef USE_DISCOVERY
 #ifdef WEBSERVER_ADVERTISE
-          MDNS.addService("http", "tcp", 80);
+          MDNS.addService("http", "tcp", WEB_PORT);
 #endif  // WEBSERVER_ADVERTISE
 #endif  // USE_DISCOVERY
        } else {
--- a/sonoff/user_config.h
+++ b/sonoff/user_config.h
@ -196,6 +196,7 @@
 //#define MY_LANGUAGE            pt-BR           // Portuguese in Brazil
 //#define MY_LANGUAGE            pt-PT           // Portuguese in Portugal
 //#define MY_LANGUAGE            ru-RU           // Russian in Russia
+//#define MY_LANGUAGE            uk-UK           // Ukrainian in Ukrain
 //#define MY_LANGUAGE            zh-CN           // Chinese (Simplified) in China
 //#define MY_LANGUAGE            zh-TW           // Chinese (Traditional) in Taiwan

--- a/sonoff/xdrv_01_mqtt.ino
+++ b/sonoff/xdrv_01_mqtt.ino
@ -1,5 +1,5 @@
 /*
-  xdrv_00_mqtt.ino - mqtt support for Sonoff-Tasmota
+  xdrv_01_mqtt.ino - mqtt support for Sonoff-Tasmota

  Copyright (C) 2018  Theo Arends

@ -745,9 +745,9 @@ bool MqttCommand()
 * Interface
 \*********************************************************************************************/

-#define XDRV_00
+#define XDRV_01

-boolean Xdrv00(byte function)
+boolean Xdrv01(byte function)
 {
  boolean result = false;

--- a/sonoff/xdrv_02_webserver.ino
+++ b/sonoff/xdrv_02_webserver.ino
@ -1,5 +1,5 @@
 /*
-  webserver.ino - webserver for Sonoff-Tasmota
+  xdrv_02_webserver.ino - webserver for Sonoff-Tasmota

  Copyright (C) 2018  Theo Arends

@ -337,6 +337,21 @@ static void WebGetArg(const char* arg, char* out, size_t max)
  out[max-1] = '\0';  // Ensure terminating NUL
 }

+void ShowWebSource(int source)
+{
+  if ((source > 0) && (source < SRC_MAX)) {
+    char stemp1[20];
+    snprintf_P(log_data, sizeof(log_data), PSTR("SRC: %s from %s"), GetTextIndexed(stemp1, sizeof(stemp1), source, kCommandSource), WebServer->client().remoteIP().toString().c_str());
+    AddLog(LOG_LEVEL_DEBUG);
+  }
+}
+
+void ExecuteWebCommand(char* svalue, int source)
+{
+  ShowWebSource(source);
+  ExecuteCommand(svalue, SRC_IGNORE);
+}
+
 void StartWebserver(int type, IPAddress ipweb)
 {
  if (!webserver_state) {
@ -567,22 +582,23 @@ void HandleAjaxStatusRefresh()

  WebGetArg("o", tmp, sizeof(tmp));
  if (strlen(tmp)) {
-    ExecuteCommandPower(atoi(tmp), POWER_TOGGLE);
+    ShowWebSource(SRC_WEBGUI);
+    ExecuteCommandPower(atoi(tmp), POWER_TOGGLE, SRC_IGNORE);
  }
  WebGetArg("d", tmp, sizeof(tmp));
  if (strlen(tmp)) {
    snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_DIMMER " %s"), tmp);
-    ExecuteCommand(svalue);
+    ExecuteWebCommand(svalue, SRC_WEBGUI);
  }
  WebGetArg("t", tmp, sizeof(tmp));
  if (strlen(tmp)) {
    snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_COLORTEMPERATURE " %s"), tmp);
-    ExecuteCommand(svalue);
+    ExecuteWebCommand(svalue, SRC_WEBGUI);
  }
  WebGetArg("k", tmp, sizeof(tmp));
  if (strlen(tmp)) {
    snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_RFKEY "%s"), tmp);
-    ExecuteCommand(svalue);
+    ExecuteWebCommand(svalue, SRC_WEBGUI);
  }

  snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{t}"));
@ -1106,6 +1122,7 @@ void HandleSaveSettings()
    }
    ShowPage(page);

+    ShowWebSource(SRC_WEBGUI);
    restart_flag = 2;
  } else {
    HandleConfiguration();
@ -1129,7 +1146,7 @@ void HandleResetConfiguration()
  ShowPage(page);

  snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_RESET " 1"));
-  ExecuteCommand(svalue);
+  ExecuteWebCommand(svalue, SRC_WEBGUI);
 }

 void HandleRestoreConfiguration()
@ -1181,7 +1198,7 @@ void HandleUpgradeFirmwareStart()
  WebGetArg("o", tmp, sizeof(tmp));
  if (strlen(tmp)) {
    snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_OTAURL " %s"), tmp);
-    ExecuteCommand(svalue);
+    ExecuteWebCommand(svalue, SRC_WEBGUI);
  }

  String page = FPSTR(HTTP_HEAD);
@ -1193,7 +1210,7 @@ void HandleUpgradeFirmwareStart()
  ShowPage(page);

  snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_UPGRADE " 1"));
-  ExecuteCommand(svalue);
+  ExecuteWebCommand(svalue, SRC_WEBGUI);
 }

 void HandleUploadDone()
@ -1233,6 +1250,8 @@ void HandleUploadDone()
  } else {
    page += F("green'>" D_SUCCESSFUL "</font></b><br/>");
    page += FPSTR(HTTP_MSG_RSTRT);
+
+    ShowWebSource(SRC_WEBGUI);
    restart_flag = 2;
  }
  SettingsBufferFree();
@ -1381,16 +1400,16 @@ void HandleHttpCommand()
    WebGetArg("user", tmp1, sizeof(tmp1));
    char tmp2[100];
    WebGetArg("password", tmp2, sizeof(tmp2));
-    if (!(!strcmp(tmp1, WEB_USERNAME) && !strcmp(tmp2, Settings.web_password))) {
-      valid = 0;
-    }
+    if (!(!strcmp(tmp1, WEB_USERNAME) && !strcmp(tmp2, Settings.web_password))) { valid = 0; }
  }

  String message = F("{\"" D_RSLT_WARNING "\":\"");
  if (valid) {
    byte curridx = web_log_index;
    WebGetArg("cmnd", svalue, sizeof(svalue));
-    if (strlen(svalue)) { ExecuteCommand(svalue); }
+    if (strlen(svalue)) {
+      ExecuteWebCommand(svalue, SRC_WEBCOMMAND);
+    }

    if (web_log_index != curridx) {
      byte counter = curridx;
@ -1449,7 +1468,7 @@ void HandleAjaxConsoleRefresh()
  if (strlen(svalue)) {
    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_COMMAND "%s"), svalue);
    AddLog(LOG_LEVEL_INFO);
-    ExecuteCommand(svalue);
+    ExecuteWebCommand(svalue, SRC_WEBCONSOLE);
  }

  WebGetArg("c2", svalue, sizeof(svalue));
@ -1624,6 +1643,7 @@ void HandleRestart()
  }
  ShowPage(page);

+  ShowWebSource(SRC_WEBGUI);
  restart_flag = 2;
 }

@ -1676,4 +1696,202 @@ boolean ValidIpAddress(String str)
  }
  return true;
 }
+
+/*********************************************************************************************/
+
+String UrlEncode(const String& text)
+{
+  const char hex[] = "0123456789ABCDEF";
+
+	String encoded = "";
+	int len = text.length();
+	int i = 0;
+	while (i < len)	{
+		char decodedChar = text.charAt(i++);
+
+/*
+    if (('a' <= decodedChar && decodedChar <= 'z') ||
+        ('A' <= decodedChar && decodedChar <= 'Z') ||
+        ('0' <= decodedChar && decodedChar <= '9') ||
+        ('=' == decodedChar)) {
+      encoded += decodedChar;
+		} else {
+      encoded += '%';
+			encoded += hex[decodedChar >> 4];
+			encoded += hex[decodedChar & 0xF];
+    }
+*/
+    if (' ' == decodedChar) {
+      encoded += '%';
+			encoded += hex[decodedChar >> 4];
+			encoded += hex[decodedChar & 0xF];
+    } else {
+      encoded += decodedChar;
+    }
+
+	}
+	return encoded;
+}
+
+int WebSend(char *buffer)
+{
+  // http://192.168.178.86:80/cm?user=admin&password=joker&cmnd=POWER1 ON
+  // http://192.168.178.86:80/cm?cmnd=POWER1 ON
+  // [192.168.178.86:80,admin:joker] POWER1 ON
+
+  char *host;
+  char *port;
+  char *user;
+  char *password;
+  char *command;
+  uint16_t nport = 80;
+  int status = 1;                             // Wrong parameters
+
+  host = strtok_r(buffer, "]", &command);     // buffer = [192.168.178.86:80,admin:joker] POWER1 ON
+  if (host && command) {
+    host = LTrim(host);
+    host++;  // Skip [
+    host = strtok_r(host, ",", &user);        // host = 192.168.178.86:80,admin:joker > 192.168.178.86:80
+    host = strtok_r(host, ":", &port);        // host = 192.168.178.86:80 > 192.168.178.86
+    if (user) {
+      user = strtok_r(user, ":", &password);  // user = admin:joker > admin
+    }
+
+//snprintf_P(log_data, sizeof(log_data), PSTR("DBG: Buffer |%X|, Host |%X|, Port |%X|, User |%X|, Password |%X|, Command |%X|"), buffer, host, port, user, password, command);
+//AddLog(LOG_LEVEL_DEBUG);
+
+    if (port) { nport = atoi(port); }
+
+    String nuri = "";
+    if (user && password) {
+      nuri += F("user=");
+      nuri += user;
+      nuri += F("&password=");
+      nuri += password;
+      nuri += F("&");
+    }
+    nuri += F("cmnd=");
+    nuri += LTrim(command);
+    String uri = UrlEncode(nuri);
+
+    IPAddress host_ip;
+    if (WiFi.hostByName(host, host_ip)) {
+      WiFiClient client;
+
+      bool connected = false;
+      byte retry = 2;
+      while ((retry > 0) && !connected) {
+        --retry;
+        connected = client.connect(host_ip, nport);
+        if (connected) break;
+      }
+
+      if (connected) {
+        String url = F("GET /cm?");
+        url += uri;
+        url += F(" HTTP/1.1\r\n Host: ");
+        url += IPAddress(host_ip).toString();
+        if (port) {
+          url += F(" \r\n Port: ");
+          url += port;
+        }
+        url += F(" \r\n Connection: close\r\n\r\n");
+
+//snprintf_P(log_data, sizeof(log_data), PSTR("DBG: Url |%s|"), url.c_str());
+//AddLog(LOG_LEVEL_DEBUG);
+
+        client.print(url.c_str());
+        client.flush();
+        client.stop();
+        status = 0;                           // No error - Done
+      } else {
+        status = 2;                           // Connection failed
+      }
+    } else {
+      status = 3;                             // Host not found
+    }
+  }
+  return status;
+}
+
+/*********************************************************************************************/
+
+enum WebCommands { CMND_WEBSERVER, CMND_WEBPASSWORD, CMND_WEBLOG, CMND_WEBSEND, CMND_EMULATION };
+const char kWebCommands[] PROGMEM = D_CMND_WEBSERVER "|" D_CMND_WEBPASSWORD "|" D_CMND_WEBLOG "|"  D_CMND_WEBSEND "|" D_CMND_EMULATION ;
+const char kWebSendStatus[] PROGMEM = D_JSON_DONE "|" D_JSON_WRONG_PARAMETERS "|" D_JSON_CONNECT_FAILED "|" D_JSON_HOST_NOT_FOUND ;
+
+bool WebCommand()
+{
+  char command[CMDSZ];
+  bool serviced = true;
+
+  int command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic, kWebCommands);
+  if (-1 == command_code) {
+    serviced = false;  // Unknown command
+  }
+  if (CMND_WEBSERVER == command_code) {
+    if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 2)) { Settings.webserver = XdrvMailbox.payload; }
+    if (Settings.webserver) {
+      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_WEBSERVER "\":\"" D_JSON_ACTIVE_FOR " %s " D_JSON_ON_DEVICE " %s " D_JSON_WITH_IP_ADDRESS " %s\"}"),
+        (2 == Settings.webserver) ? D_ADMIN : D_USER, my_hostname, WiFi.localIP().toString().c_str());
+    } else {
+      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, GetStateText(0));
+    }
+  }
+  else if (CMND_WEBPASSWORD == command_code) {
+    if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.web_password))) {
+      strlcpy(Settings.web_password, (!strcmp(XdrvMailbox.data,"0")) ? "" : (1 == XdrvMailbox.payload) ? WEB_PASSWORD : XdrvMailbox.data, sizeof(Settings.web_password));
+      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.web_password);
+    } else {
+      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_ASTERIX, command);
+    }
+  }
+  else if (CMND_WEBLOG == command_code) {
+    if ((XdrvMailbox.payload >= LOG_LEVEL_NONE) && (XdrvMailbox.payload <= LOG_LEVEL_ALL)) { Settings.weblog_level = XdrvMailbox.payload; }
+    snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.weblog_level);
+  }
+  else if (CMND_WEBSEND == command_code) {
+    if (XdrvMailbox.data_len > 0) {
+      uint8_t result = WebSend(XdrvMailbox.data);
+      char stemp1[20];
+      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, GetTextIndexed(stemp1, sizeof(stemp1), result, kWebSendStatus));
+    }
+  }
+#ifdef USE_EMULATION
+  else if (CMND_EMULATION == command_code) {
+    if ((XdrvMailbox.payload >= EMUL_NONE) && (XdrvMailbox.payload < EMUL_MAX)) {
+      Settings.flag2.emulation = XdrvMailbox.payload;
+      restart_flag = 2;
+    }
+    snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.emulation);
+  }
+#endif  // USE_EMULATION
+  else serviced = false;  // Unknown command
+
+  return serviced;
+}
+
+/*********************************************************************************************\
+ * Interface
+\*********************************************************************************************/
+
+#define XDRV_02
+
+boolean Xdrv02(byte function)
+{
+  boolean result = false;
+
+  switch (function) {
+    case FUNC_LOOP:
+      PollDnsWebserver();
+#ifdef USE_EMULATION
+      if (Settings.flag2.emulation) PollUdp();
+#endif  // USE_EMULATION
+      break;
+    case FUNC_COMMAND:
+      result = WebCommand();
+      break;
+  }
+  return result;
+}
 #endif  // USE_WEBSERVER
--- a/sonoff/xdrv_03_energy.ino
+++ b/sonoff/xdrv_03_energy.ino
@ -371,7 +371,12 @@ bool CseSerialInput()
      return 1;
    }
  } else {
-    if (0x5A == serial_in_byte) {             // 0x5A - Packet header 2
+    if ((0x5A == serial_in_byte) && (serial_in_byte_counter)) {  // 0x5A - Packet header 2
+      if (serial_in_byte_counter > 1) {       // Sync buffer with data (issue #1907)
+        serial_in_buffer[0] = serial_in_buffer[--serial_in_byte_counter];
+        serial_in_byte_counter = 1;
+        AddLog_P(LOG_LEVEL_DEBUG, PSTR("CSE: Fixed out-of-sync"));
+      }
      cse_receive_flag = 1;
    } else {
      serial_in_byte_counter = 0;
@ -721,7 +726,7 @@ void EnergyMarginCheck()
          snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_MAXPOWERREACHED "\":\"%d%s\"}"), energy_power_u, (Settings.flag.value_units) ? " " D_UNIT_WATT : "");
          MqttPublishPrefixTopic_P(STAT, S_RSLT_WARNING);
          EnergyMqttShow();
-          ExecuteCommandPower(1, POWER_OFF);
+          ExecuteCommandPower(1, POWER_OFF, SRC_MAXPOWER);
          if (!energy_mplr_counter) {
            energy_mplr_counter = Settings.param[P_MAX_POWER_RETRY] +1;
          }
@ -743,7 +748,7 @@ void EnergyMarginCheck()
          if (energy_mplr_counter) {
            snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_POWERMONITOR "\":\"%s\"}"), GetStateText(1));
            MqttPublishPrefixTopic_P(RESULT_OR_STAT, PSTR(D_JSON_POWERMONITOR));
-            ExecuteCommandPower(1, POWER_ON);
+            ExecuteCommandPower(1, POWER_ON, SRC_MAXPOWER);
          } else {
            snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_MAXPOWERREACHEDRETRY "\":\"%s\"}"), GetStateText(0));
            MqttPublishPrefixTopic_P(STAT, S_RSLT_WARNING);
@ -761,7 +766,7 @@ void EnergyMarginCheck()
      energy_max_energy_state = 1;
      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_ENERGYMONITOR "\":\"%s\"}"), GetStateText(1));
      MqttPublishPrefixTopic_P(RESULT_OR_STAT, PSTR(D_JSON_ENERGYMONITOR));
-      ExecuteCommandPower(1, POWER_ON);
+      ExecuteCommandPower(1, POWER_ON, SRC_MAXENERGY);
    }
    else if ((1 == energy_max_energy_state) && (energy_daily_u >= Settings.energy_max_energy)) {
      energy_max_energy_state = 2;
@ -769,7 +774,7 @@ void EnergyMarginCheck()
      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_MAXENERGYREACHED "\":\"%s%s\"}"), mqtt_data, (Settings.flag.value_units) ? " " D_UNIT_KILOWATTHOUR : "");
      MqttPublishPrefixTopic_P(STAT, S_RSLT_WARNING);
      EnergyMqttShow();
-      ExecuteCommandPower(1, POWER_OFF);
+      ExecuteCommandPower(1, POWER_OFF, SRC_MAXENERGY);
    }
  }
 #endif  // FEATURE_POWER_LIMIT
--- a/sonoff/xdrv_04_light.ino
+++ b/sonoff/xdrv_04_light.ino
@ -1,5 +1,5 @@
 /*
-  xdrv_01_light.ino - PWM, WS2812 and sonoff led support for Sonoff-Tasmota
+  xdrv_04_light.ino - PWM, WS2812 and sonoff led support for Sonoff-Tasmota

  Copyright (C) 2018  Theo Arends

@ -230,7 +230,7 @@ void AriluxRfHandler()
        }
      }
      if (strlen(command)) {
-        ExecuteCommand(command);
+        ExecuteCommand(command, SRC_LIGHT);
      }
    }
  }
@ -529,7 +529,7 @@ char* LightGetColor(uint8_t type, char* scolor)
 void LightPowerOn()
 {
  if (Settings.light_dimmer && !(light_power)) {
-    ExecuteCommandPower(light_device, POWER_ON);
+    ExecuteCommandPower(light_device, POWER_ON, SRC_LIGHT);
  }
 }

@ -585,11 +585,11 @@ void LightPreparePower()
 {
  if (Settings.light_dimmer && !(light_power)) {
    if (!Settings.flag.not_power_linked) {
-      ExecuteCommandPower(light_device, POWER_ON_NO_STATE);
+      ExecuteCommandPower(light_device, POWER_ON_NO_STATE, SRC_LIGHT);
    }
  }
  else if (!Settings.light_dimmer && light_power) {
-    ExecuteCommandPower(light_device, POWER_OFF_NO_STATE);
+    ExecuteCommandPower(light_device, POWER_OFF_NO_STATE, SRC_LIGHT);
  }
 #ifdef USE_DOMOTICZ
  DomoticzUpdatePowerState(light_device);
@ -1287,9 +1287,9 @@ boolean LightCommand()
 * Interface
 \*********************************************************************************************/

-#define XDRV_01
+#define XDRV_04

-boolean Xdrv01(byte function)
+boolean Xdrv04(byte function)
 {
  boolean result = false;

--- a/sonoff/xdrv_05_irremote.ino
+++ b/sonoff/xdrv_05_irremote.ino
@ -1,5 +1,5 @@
 /*
-  xdrv_02_irremote.ino - infra red support for Sonoff-Tasmota
+  xdrv_05_irremote.ino - infra red support for Sonoff-Tasmota

  Copyright (C) 2018  Heiko Krupp, Lazar Obradovic and Theo Arends

@ -393,9 +393,9 @@ boolean IrSendCommand()
 * Interface
 \*********************************************************************************************/

-#define XDRV_02
+#define XDRV_05

-boolean Xdrv02(byte function)
+boolean Xdrv05(byte function)
 {
  boolean result = false;

--- a/sonoff/xdrv_06_snfbridge.ino
+++ b/sonoff/xdrv_06_snfbridge.ino
@ -1,5 +1,5 @@
 /*
-  xdrv_04_snfbridge.ino - sonoff RF bridge 433 support for Sonoff-Tasmota
+  xdrv_06_snfbridge.ino - sonoff RF bridge 433 support for Sonoff-Tasmota

  Copyright (C) 2018  Theo Arends

@ -303,9 +303,9 @@ boolean SonoffBridgeCommand()
 * Interface
 \*********************************************************************************************/

-#define XDRV_04
+#define XDRV_06

-boolean Xdrv04(byte function)
+boolean Xdrv06(byte function)
 {
  boolean result = false;

--- a/sonoff/xdrv_07_domoticz.ino
+++ b/sonoff/xdrv_07_domoticz.ino
@ -1,5 +1,5 @@
 /*
-  xdrv_05_domoticz.ino - domoticz support for Sonoff-Tasmota
+  xdrv_07_domoticz.ino - domoticz support for Sonoff-Tasmota

  Copyright (C) 2018  Theo Arends

@ -437,9 +437,9 @@ void DomoticzSaveSettings()
 * Interface
 \*********************************************************************************************/

-#define XDRV_05
+#define XDRV_07

-boolean Xdrv05(byte function)
+boolean Xdrv07(byte function)
 {
  boolean result = false;

--- a/sonoff/xdrv_09_timers.ino
+++ b/sonoff/xdrv_09_timers.ino
@ -290,7 +290,7 @@ void TimerEverySecond()
                XdrvRulesProcess();
              } else
 #endif  // USE_RULES
-                if (devices_present) { ExecuteCommandPower(xtimer.device +1, xtimer.power); }
+                if (devices_present) { ExecuteCommandPower(xtimer.device +1, xtimer.power, SRC_TIMER); }
            }
          }
        }
--- a/sonoff/xdrv_10_rules.ino
+++ b/sonoff/xdrv_10_rules.ino
@ -90,6 +90,7 @@ uint32_t rules_triggers[MAX_RULE_SETS] = { 0 };
 uint8_t rules_trigger_count[MAX_RULE_SETS] = { 0 };
 uint8_t rules_teleperiod = 0;

+char event_data[100];
 char vars[RULES_MAX_VARS][10] = { 0 };

 /*******************************************************************************************/
@ -324,7 +325,7 @@ bool RuleSetProcess(byte rule_set, String &event_saved)
 //      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, D_CMND_RULE, D_JSON_INITIATED);
 //      MqttPublishPrefixTopic_P(RESULT_OR_STAT, PSTR(D_CMND_RULE));

-      ExecuteCommand(command);
+      ExecuteCommand(command, SRC_RULE);
      serviced = true;
    }
    rules_trigger_count[rule_set]++;
@ -374,7 +375,26 @@ void RulesEvery50ms()
        }
      }
      rules_old_power = rules_new_power;
-    } else {
+    }
+    else if(event_data[0]) {
+      char *event;
+      char *parameter;
+      event = strtok_r(event_data, "=", &parameter);     // event_data = fanspeed=10
+      if (event) {
+        event = Trim(event);
+        if (parameter) {
+          parameter = Trim(parameter);
+        } else {
+          parameter = event + strlen(event);  // '\0'
+        }
+        snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"Event\":{\"%s\":\"%s\"}}"), event, parameter);
+        event_data[0] ='\0';
+        RulesProcess();
+      } else {
+        event_data[0] ='\0';
+      }
+    }
+    else {
      rules_quota++;
      if (rules_quota &1) {              // Every 100 ms
        mqtt_data[0] = '\0';
@ -464,17 +484,7 @@ boolean RulesCommand()
  }
  else if (CMND_EVENT == command_code) {
    if (XdrvMailbox.data_len > 0) {
-      String event = XdrvMailbox.data;
-      String parameter = "";
-      int pos = event.indexOf('=');
-      if (pos > 0) {
-        parameter = event.substring(pos +1);
-        parameter.trim();
-        event = event.substring(0, pos);
-      }
-      event.trim();
-      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"Event\":{\"%s\":\"%s\"}}"), event.c_str(), parameter.c_str());
-      RulesProcess();
+      strlcpy(event_data, XdrvMailbox.data, sizeof(event_data));
    }
    snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_DONE);
  }
--- a/sonoff/xdrv_11_knx.ino
+++ b/sonoff/xdrv_11_knx.ino
@ -115,6 +115,11 @@ device_parameters_t device_param[] = {
  { KNX_ENERGY_DAILY   , false, false, KNX_Empty },
  { KNX_ENERGY_START   , false, false, KNX_Empty },
  { KNX_ENERGY_TOTAL   , false, false, KNX_Empty },
+  { KNX_SLOT1 , false, false, KNX_Empty },
+  { KNX_SLOT2 , false, false, KNX_Empty },
+  { KNX_SLOT3 , false, false, KNX_Empty },
+  { KNX_SLOT4 , false, false, KNX_Empty },
+  { KNX_SLOT5 , false, false, KNX_Empty },
  { KNX_Empty, false, false, KNX_Empty}
 };

@ -145,6 +150,11 @@ const char * device_param_ga[] = {
  D_ENERGY_TODAY      ,
  D_ENERGY_YESTERDAY  ,
  D_ENERGY_TOTAL      ,
+  D_KNX_TX_SLOT   " 1",
+  D_KNX_TX_SLOT   " 2",
+  D_KNX_TX_SLOT   " 3",
+  D_KNX_TX_SLOT   " 4",
+  D_KNX_TX_SLOT   " 5",
  nullptr
 };

@ -175,9 +185,20 @@ const char *device_param_cb[] = {
  D_REPLY " " D_ENERGY_TODAY      ,
  D_REPLY " " D_ENERGY_YESTERDAY  ,
  D_REPLY " " D_ENERGY_TOTAL      ,
+  D_KNX_RX_SLOT   " 1",
+  D_KNX_RX_SLOT   " 2",
+  D_KNX_RX_SLOT   " 3",
+  D_KNX_RX_SLOT   " 4",
+  D_KNX_RX_SLOT   " 5",
  nullptr
 };

+// Commands
+#define D_CMND_KNXTXCMND "KnxTx_Cmnd"
+#define D_CMND_KNXTXVAL "KnxTx_Val"
+enum KnxCommands { CMND_KNXTXCMND, CMND_KNXTXVAL };
+const char kKnxCommands[] PROGMEM = D_CMND_KNXTXCMND "|" D_CMND_KNXTXVAL ;
+

 byte KNX_GA_Search( byte param, byte start = 0 )
 {
@ -377,12 +398,20 @@ bool KNX_CONFIG_NOT_MATCH()
  {
    if ( !device_param[i].show ) { // device has this parameter ?
      // if not, search for all registered group address to this parameter for deletion
+
+      // Checks all GA
      if ( KNX_GA_Search(i+1) != KNX_Empty ) { return true; }
-      if ( (i < 8) || (i > 15) ) // check relays and sensors (i from 8 to 16 are toggle relays parameters)
+
+      // Check all CB
+      if ( i < 8 ) // check relays (i from 8 to 15 are toggle relays parameters)
      {
        if ( KNX_CB_Search(i+1) != KNX_Empty ) { return true; }
        if ( KNX_CB_Search(i+9) != KNX_Empty ) { return true; }
      }
+      if ( i > 15 ) // check sensors and others
+      {
+        if ( KNX_CB_Search(i+1) != KNX_Empty ) { return true; }
+      }
    }
  }
  return false;
@ -448,6 +477,14 @@ void KNX_INIT()
    device_param[KNX_ENERGY_POWERFACTOR-1].show = true;
  }

+#ifdef USE_RULES
+  device_param[KNX_SLOT1-1].show = true;
+  device_param[KNX_SLOT2-1].show = true;
+  device_param[KNX_SLOT3-1].show = true;
+  device_param[KNX_SLOT4-1].show = true;
+  device_param[KNX_SLOT5-1].show = true;
+#endif
+
  // Delete from KNX settings all configuration is not anymore related to this device
  if (KNX_CONFIG_NOT_MATCH()) {
    Settings.knx_GA_registered = 0;
@ -494,18 +531,32 @@ void KNX_CB_Action(message_t const &msg, void *arg)
    case KNX_CT_WRITE:
      if (chan->type < 9) // Set Relays
      {
-        ExecuteCommandPower(chan->type, msg.data[0]);
+        ExecuteCommandPower(chan->type, msg.data[0], SRC_KNX);
      }
      else if (chan->type < 17) // Toggle Relays
      {
        if (!toggle_inhibit) {
-          ExecuteCommandPower((chan->type) -8, 2);
+          ExecuteCommandPower((chan->type) -8, 2, SRC_KNX);
          if (Settings.flag.knx_enable_enhancement) {
            toggle_inhibit = TOGGLE_INHIBIT_TIME;
          }
        }
      }
+#ifdef USE_RULES
+      else if ((chan->type >= KNX_SLOT1) && (chan->type <= KNX_SLOT5)) // KNX RX SLOTs (write command)
+      {
+        if (!toggle_inhibit) {
+          char command[25];
+          snprintf_P(command, sizeof(command), PSTR("event KNXRX_VAL%d=%d"), ((chan->type) - KNX_SLOT1 + 1 ), msg.data[0]);
+          ExecuteCommand(command, SRC_KNX);
+          if (Settings.flag.knx_enable_enhancement) {
+            toggle_inhibit = TOGGLE_INHIBIT_TIME;
+          }
+        }
+      }
+#endif
      break;
+
    case KNX_CT_READ:
      if (chan->type < 9) // reply Relays status
      {
@ -531,6 +582,19 @@ void KNX_CB_Action(message_t const &msg, void *arg)
          knx.answer_2byte_float(msg.received_on, last_hum);
        }
      }
+#ifdef USE_RULES
+      else if ((chan->type >= KNX_SLOT1) && (chan->type <= KNX_SLOT5)) // KNX RX SLOTs (read command)
+      {
+        if (!toggle_inhibit) {
+          char command[25];
+          snprintf_P(command, sizeof(command), PSTR("event KNXRX_REQ%d"), ((chan->type) - KNX_SLOT1 + 1 ) );
+          ExecuteCommand(command, SRC_KNX);
+          if (Settings.flag.knx_enable_enhancement) {
+            toggle_inhibit = TOGGLE_INHIBIT_TIME;
+          }
+        }
+      }
+#endif
      break;
  }
 }
@ -939,6 +1003,71 @@ void KNX_Save_Settings()
 #endif  // USE_WEBSERVER


+boolean KnxCommand()
+{
+  char command[CMDSZ];
+  uint8_t index = XdrvMailbox.index;
+  int command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic, kKnxCommands);
+
+  if (!(Settings.flag.knx_enabled)) { return false; }
+
+  if (-1 == command_code) { return false; } // Unknown command
+
+  else if ((CMND_KNXTXCMND == command_code) && (index > 0) && (index <= MAX_KNXTX_CMNDS) && (XdrvMailbox.data_len > 0)) {
+    // index <- KNX SLOT to use
+    // XdrvMailbox.payload <- data to send
+
+    // Search all the registered GA that has that output (variable: KNX SLOTx) as parameter
+    byte i = KNX_GA_Search(index + KNX_SLOT1 -1);
+    while ( i != KNX_Empty ) {
+      KNX_addr.value = Settings.knx_GA_addr[i];
+      knx.write_1bit(KNX_addr, !(XdrvMailbox.payload == 0));
+      if (Settings.flag.knx_enable_enhancement) {
+        knx.write_1bit(KNX_addr, !(XdrvMailbox.payload == 0));
+        knx.write_1bit(KNX_addr, !(XdrvMailbox.payload == 0));
+      }
+
+      snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s = %d " D_SENT_TO " %d.%d.%d"),
+       device_param_ga[index + KNX_SLOT1 -2], !(XdrvMailbox.payload == 0),
+       KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member);
+      AddLog(LOG_LEVEL_INFO);
+
+      i = KNX_GA_Search(index + KNX_SLOT1 -1, i + 1);
+    }
+  }
+
+  else if ((CMND_KNXTXVAL == command_code) && (index > 0) && (index <= MAX_KNXTX_CMNDS) && (XdrvMailbox.data_len > 0)) {
+    // index <- KNX SLOT to use
+    // XdrvMailbox.payload <- data to send
+
+    // Search all the registered GA that has that output (variable: KNX SLOTx) as parameter
+    byte i = KNX_GA_Search(index + KNX_SLOT1 -1);
+    while ( i != KNX_Empty ) {
+      KNX_addr.value = Settings.knx_GA_addr[i];
+      knx.write_2byte_float(KNX_addr, XdrvMailbox.payload);
+      if (Settings.flag.knx_enable_enhancement) {
+        knx.write_2byte_float(KNX_addr, XdrvMailbox.payload);
+        knx.write_2byte_float(KNX_addr, XdrvMailbox.payload);
+      }
+
+      snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s = %d " D_SENT_TO " %d.%d.%d"),
+       device_param_ga[index + KNX_SLOT1 -2], XdrvMailbox.payload,
+       KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member);
+      AddLog(LOG_LEVEL_INFO);
+
+      i = KNX_GA_Search(index + KNX_SLOT1 -1, i + 1);
+    }
+  }
+
+  else { return false; }  // Incomplete command
+
+  snprintf_P (mqtt_data, sizeof(mqtt_data), PSTR("{\"%s%d\":\"%d\"}"),
+    command, index, XdrvMailbox.payload );
+
+  return true;
+}
+
+
 /*********************************************************************************************\
 * Interface
 \*********************************************************************************************/
@ -960,9 +1089,9 @@ boolean Xdrv11(byte function)
          toggle_inhibit--;
        }
        break;
-//      case FUNC_COMMAND:
-//        result = KNXCommand();
-//        break;
+      case FUNC_COMMAND:
+        result = KnxCommand();
+        break;
 //      case FUNC_SET_POWER:
 //        break;
    }
--- a/sonoff/xdrv_12_home_assistant.ino
+++ b/sonoff/xdrv_12_home_assistant.ino
@ -1,5 +1,5 @@
 /*
-  xdrv_07_home_assistant.ino - home assistant support for Sonoff-Tasmota
+  xdrv_12_home_assistant.ino - home assistant support for Sonoff-Tasmota

  Copyright (C) 2018  Theo Arends

@ -208,9 +208,9 @@ void HAssDiscovery(uint8_t mode)
 * Interface
 \*********************************************************************************************/

-#define XDRV_07
+#define XDRV_12

-boolean Xdrv07(byte function)
+boolean Xdrv12(byte function)
 {
  boolean result = false;

--- a/sonoff/xdrv_interface.ino
+++ b/sonoff/xdrv_interface.ino
@ -18,10 +18,6 @@
 */

 boolean (* const xdrv_func_ptr[])(byte) PROGMEM = {   // Driver Function Pointers
-#ifdef XDRV_00
-  &Xdrv00,
-#endif
-
 #ifdef XDRV_01
  &Xdrv01,
 #endif
--- a/sonoff/xplg_wemohue.ino
+++ b/sonoff/xplg_wemohue.ino
@ -387,10 +387,10 @@ void HandleUpnpEvent()
  //differentiate get and set state
  if (request.indexOf(F("SetBinaryState")) > 0) {
    if (request.indexOf(F("State>1</Binary")) > 0) {
-      ExecuteCommandPower(devices_present, POWER_ON);
+      ExecuteCommandPower(devices_present, POWER_ON, SRC_WEMO);
    }
    else if (request.indexOf(F("State>0</Binary")) > 0) {
-      ExecuteCommandPower(devices_present, POWER_OFF);
+      ExecuteCommandPower(devices_present, POWER_OFF, SRC_WEMO);
    }
  }
  else if(request.indexOf(F("GetBinaryState")) > 0){
@ -660,10 +660,10 @@ void HueLights(String *path)
        on = hue_json["on"];
        switch(on)
        {
-          case false : ExecuteCommandPower(device, POWER_OFF);
+          case false : ExecuteCommandPower(device, POWER_OFF, SRC_HUE);
                       response.replace("{re", "false");
                       break;
-          case true  : ExecuteCommandPower(device, POWER_ON);
+          case true  : ExecuteCommandPower(device, POWER_ON, SRC_HUE);
                       response.replace("{re", "true");
                       break;
          default    : response.replace("{re", (power & (1 << (device-1))) ? "true" : "false");
--- a/sonoff/xsns_21_sgp30.ino
+++ b/sonoff/xsns_21_sgp30.ino
@ -76,8 +76,8 @@ void Sgp30Show(boolean json)
 #ifdef USE_DOMOTICZ
      if (0 == tele_period) DomoticzSensor(DZ_AIRQUALITY, sgp.eCO2);
 #endif  // USE_DOMOTICZ
-    } else {
 #ifdef USE_WEBSERVER
+    } else {
      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SGP30, mqtt_data, sgp.eCO2, sgp.TVOC);
 #endif
    }
--- a/sonoff/xsns_23_sdm120.ino
+++ b/sonoff/xsns_23_sdm120.ino
@ -262,8 +262,8 @@ void SDM120Show(boolean json)
 #ifdef USE_WEBSERVER
  } else {
    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SDM120_DATA, mqtt_data, voltage, current, active_power, apparent_power, reactive_power, power_factor, frequency, energy_total);
-  }
 #endif  // USE_WEBSERVER
+  }
 }

 /*********************************************************************************************\
--- a/sonoff/xsns_24_si1145.ino
+++ b/sonoff/xsns_24_si1145.ino
@ -335,8 +335,8 @@ void Si1145Show(boolean json)
 #ifdef USE_DOMOTICZ
      if (0 == tele_period) DomoticzSensor(DZ_ILLUMINANCE, visible);
 #endif  // USE_DOMOTICZ
-    } else {
 #ifdef USE_WEBSERVER
+    } else {
      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SI1145, mqtt_data, visible, infrared, uvindex /100, uvindex %100);
 #endif
    }
--- a/sonoff/xsns_25_sdm630.ino
+++ b/sonoff/xsns_25_sdm630.ino
@ -317,8 +317,8 @@ void SDM630Show(boolean json)
    active_power_l1, active_power_l2, active_power_l3,
    reactive_power_l1, reactive_power_l2, reactive_power_l3,
    power_factor_l1, power_factor_l2, power_factor_l3, energy_total);
-  }
 #endif  // USE_WEBSERVER
+  }
 }

 /*********************************************************************************************\