Merge branch 'development' into release

tasmota/language/bg-BG.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "Ю"
 #define D_TX20_WEST "З"
 
+// xsns_53_sml.ino
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Няма"
 #define D_SENSOR_USER          "Потребит."

tasmota/language/cs-CZ.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "J"
 #define D_TX20_WEST "Z"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Není"
 #define D_SENSOR_USER          "User"

tasmota/language/de-DE.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Verbrauch"
+#define D_TPWROUT "Einspeisung"
+#define D_TPWRCURR "Aktueller Verbrauch"
+#define D_TPWRCURR1 "Verbrauch P1"
+#define D_TPWRCURR2 "Verbrauch P2"
+#define D_TPWRCURR3 "Verbrauch P3"
+#define D_Strom_L1 "Strom L1"
+#define D_Strom_L2 "Strom L2"
+#define D_Strom_L3 "Strom L3"
+#define D_Spannung_L1 "Spannung L1"
+#define D_Spannung_L2 "Spannung L2"
+#define D_Spannung_L3 "Spannung L3"
+#define D_METERNR "Zähler Nr"
+#define D_METERSID "Service ID"
+#define D_GasIN "Zählerstand"                // Gas-Verbrauch
+#define D_H2oIN "Zählerstand"                // H2o-Verbrauch
+#define D_StL1L2L3 "Ströme L1+L2+L3"
+#define D_SpL1L2L3 "Spannung L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/language/el-GR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "Ν"
 #define D_TX20_WEST "Δ"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Κανένα"
 #define D_SENSOR_USER          "User"

tasmota/language/en-GB.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"                // Gas-Verbrauch
+#define D_H2oIN "Counter"                // H2o-Verbrauch
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/language/es-ES.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total de Entrada"
+#define D_TPWROUT "Total de Salida"
+#define D_TPWRCURR "Corriente-En/Sal"
+#define D_TPWRCURR1 "Corriente-Entr p1"
+#define D_TPWRCURR2 "Corriente-Entr p2"
+#define D_TPWRCURR3 "Corriente-Entr p3"
+#define D_Strom_L1 "Corriente L1"
+#define D_Strom_L2 "Corriente L2"
+#define D_Strom_L3 "Corriente L3"
+#define D_Spannung_L1 "Voltaje L1"
+#define D_Spannung_L2 "Voltaje L2"
+#define D_Spannung_L3 "Voltaje L3"
+#define D_METERNR "Número de Medidor"
+#define D_METERSID "ID de Servicio"
+#define D_GasIN "Contador"
+#define D_H2oIN "Contador"
+#define D_StL1L2L3 "Corriente L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Ninguno"
 #define D_SENSOR_USER          "Por Usuario"

tasmota/language/fr-FR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Aucun"
 #define D_SENSOR_USER          "Utilisateur"

tasmota/language/he-HE.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "משתמש"

tasmota/language/hu-HU.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "D"
 #define D_TX20_WEST "NY"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nincs"
 #define D_SENSOR_USER          "User"

tasmota/language/it-IT.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nessuno"
 #define D_SENSOR_USER          "User"

tasmota/language/ko-KO.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "없음"
 #define D_SENSOR_USER          "User"

tasmota/language/nl-NL.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Geen"
 #define D_SENSOR_USER          "Gebruiker"

tasmota/language/pl-PL.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Brak"
 #define D_SENSOR_USER          "Użytkownik"

tasmota/language/pt-BR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nenhum"
 #define D_SENSOR_USER          "User"

tasmota/language/pt-PT.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+//xsns_53_sml.ino 
+#define D_TPWRIN "Total-Consumo"
+#define D_TPWROUT "Total-Geração"
+#define D_TPWRCURR "Corrente-Consumo/Geração"
+#define D_TPWRCURR1 "Corrente-Consumo F1"
+#define D_TPWRCURR2 "Corrente-Consumo F2"
+#define D_TPWRCURR3 "Corrente-Consumo F3"
+#define D_Strom_L1 "Corrente F1"
+#define D_Strom_L2 "Corrente F2"
+#define D_Strom_L3 "Corrente F3"
+#define D_Spannung_L1 "Tensão F1"
+#define D_Spannung_L2 "Tensão F2"
+#define D_Spannung_L3 "Tensão F3"
+#define D_METERNR "Número_Contador"
+#define D_METERSID "ID Serviço"
+#define D_GasIN "Contador" 
+#define D_H2oIN "Contador"
+#define D_StL1L2L3 "Corrente F1+F2+F3"
+#define D_SpL1L2L3 "Tensão F1+F2+F3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nenhum"
 #define D_SENSOR_USER          "User"

tasmota/language/ro-RO.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "V"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Fără"
 #define D_SENSOR_USER          "Utilizator"

tasmota/language/ru-RU.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "-нет-"
 #define D_SENSOR_USER          "User"

tasmota/language/sk-SK.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "J"
 #define D_TX20_WEST "Z"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Žiaden"
 #define D_SENSOR_USER          "User"

tasmota/language/sv-SE.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "V"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Ingen"
 #define D_SENSOR_USER          "User"

tasmota/language/tr-TR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/language/uk-UA.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "Пд"
 #define D_TX20_WEST "Зх"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Немає"
 #define D_SENSOR_USER          "Користувач"

tasmota/language/zh-CN.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "南"
 #define D_TX20_WEST "西"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "无"
 #define D_SENSOR_USER          "User"

tasmota/language/zh-TW.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/xdrv_12_home_assistant.ino

@@ -67,6 +67,12 @@ const char HASS_DISCOVER_BIN_SWITCH[] PROGMEM =
   "\"pl_on\":\"%s\","                          // ON
   "\"pl_off\":\"%s\"";                         // OFF
 
+const char HASS_DISCOVER_BIN_PIR[] PROGMEM =
+  ",\"val_tpl\":\"{{value_json.%s}}\","        // STATE
+  "\"frc_upd\":true,"                          // In ON/OFF case, enable force_update to make automations work
+  "\"pl_on\":\"%s\","                          // ON
+  "\"off_dly\":1";                             // Switchmode13 and Switchmode14 doesn't transmit an OFF state.
+
 const char HASS_DISCOVER_LIGHT_DIMMER[] PROGMEM =
   ",\"bri_cmd_t\":\"%s\","                     // cmnd/led2/Dimmer
   "\"bri_stat_t\":\"%s\","                     // stat/led2/RESULT
@@ -292,7 +298,7 @@ void HAssAnnouncerTriggers(uint8_t device, uint8_t present, uint8_t key, uint8_t
   }
 }
 
-void HAssAnnouncerBinSensors(uint8_t device, uint8_t present, uint8_t dual, uint8_t toggle)
+void HAssAnnouncerBinSensors(uint8_t device, uint8_t present, uint8_t dual, uint8_t toggle, uint8_t pir)
 {
   char stopic[TOPSZ];
   char stemp1[TOPSZ];
@@ -321,7 +327,11 @@ void HAssAnnouncerBinSensors(uint8_t device, uint8_t present, uint8_t dual, uint
 
       snprintf_P(name, sizeof(name), PSTR("%s Switch%d"), SettingsText(SET_FRIENDLYNAME1), device + 1);
       Response_P(HASS_DISCOVER_BASE, name, state_topic, availability_topic);
+      if (!pir) {
         TryResponseAppend_P(HASS_DISCOVER_BIN_SWITCH, PSTR(D_RSLT_STATE), SettingsText(SET_STATE_TXT2), SettingsText(SET_STATE_TXT1));
+      } else {
+        TryResponseAppend_P(HASS_DISCOVER_BIN_PIR, PSTR(D_RSLT_STATE), SettingsText(SET_STATE_TXT2));
+      }
       TryResponseAppend_P(HASS_DISCOVER_DEVICE_INFO_SHORT, unique_id, ESP.getChipId());
       TryResponseAppend_P(PSTR("}"));
     }
@@ -337,6 +347,7 @@ void HAssAnnounceSwitches(void)
     uint8_t dual = 0;
     uint8_t toggle = 1;
     uint8_t hold = 0;
+    uint8_t pir = 0;
 
     if (pin[GPIO_SWT1 + switch_index] < 99) { switch_present = 1; }
 
@@ -367,34 +378,38 @@ void HAssAnnounceSwitches(void)
       uint8_t swmode = Settings.switchmode[switch_index];
 
       switch (swmode) {
-        case 1:
+        case FOLLOW:
-        case 2:
+        case FOLLOW_INV:
           toggle = 0;     // Binary sensor and no triggers
           break;
-        case 3:
+        case PUSHBUTTON:
-        case 4:
+        case PUSHBUTTON_INV:
           dual = 1;       // Binary sensor and TOGGLE (button_short_press) trigger
           break;
-        case 5:
+        case PUSHBUTTONHOLD:
-        case 6:
+        case PUSHBUTTONHOLD_INV:
           dual = 1;       // Binary sensor, TOGGLE (button_short_press) and HOLD (button_long_press) triggers
           hold = 2;
           break;
-        case 8:
+        case TOGGLEMULTI:
           hold = 3;       // TOGGLE (button_short_press) and HOLD (button_double_press) triggers
           break;
-        case 9:
+        case FOLLOWMULTI:
-        case 10:
+        case FOLLOWMULTI_INV:
           dual = 1;       // Binary sensor and HOLD (button_long_press) trigger
           toggle = 0;
           hold = 3;
           break;
+        case PUSHON:
+        case PUSHON_INV:
+          toggle = 0;
+          pir = 1;        // Binary sensor with only ON state and automatic OFF after 1 second.
       }
 
     } else { switch_present = 0;}
 
     HAssAnnouncerTriggers(switch_index, switch_present, 1, toggle, hold);
-    HAssAnnouncerBinSensors(switch_index, switch_present, dual, toggle);
+    HAssAnnouncerBinSensors(switch_index, switch_present, dual, toggle, pir);
   }
 }
 
@@ -533,6 +548,7 @@ void HAssAnnounceSensors(void)
       snprintf_P(sensordata, sizeof(sensordata), PSTR("%s}"), sensordata); // {"INA219":{"Voltage":4.494,"Current":0.020,"Power":0.089}}
       // USE THE FOLLOWING LINE TO TEST JSON
       //snprintf_P(sensordata, sizeof(sensordata), PSTR("{\"HX711\":{\"Weight\":[22,34,1023.4], \"Battery\":25}}"));
+
       StaticJsonBuffer<500> jsonBuffer;
       JsonObject &root = jsonBuffer.parseObject(sensordata);
       if (!root.success())

tasmota/xsns_53_sml.ino

@@ -50,70 +50,6 @@
 // addresses a bug in meter DWS74
 //#define DWS74_BUG
 
-// max 23 chars
-#if MY_LANGUAGE==de-DE
-// german web text
-#define D_TPWRIN "Verbrauch"
-#define D_TPWROUT "Einspeisung"
-#define D_TPWRCURR "Aktueller Verbrauch"
-#define D_TPWRCURR1 "Verbrauch P1"
-#define D_TPWRCURR2 "Verbrauch P2"
-#define D_TPWRCURR3 "Verbrauch P3"
-#define D_Strom_L1 "Strom L1"
-#define D_Strom_L2 "Strom L2"
-#define D_Strom_L3 "Strom L3"
-#define D_Spannung_L1 "Spannung L1"
-#define D_Spannung_L2 "Spannung L2"
-#define D_Spannung_L3 "Spannung L3"
-#define D_METERNR "Zähler Nr"
-#define D_METERSID "Service ID"
-#define D_GasIN "Zählerstand"                // Gas-Verbrauch
-#define D_H2oIN "Zählerstand"                // H2o-Verbrauch
-#define D_StL1L2L3 "Ströme L1+L2+L3"
-#define D_SpL1L2L3 "Spannung L1+L2+L3/3"
-
-#else
-// other languages (tbd)
-#undef D_TPWRIN
-#undef D_TPWROUT
-#undef D_TPWRCURR
-#undef D_TPWRCURR1
-#undef D_TPWRCURR2
-#undef D_TPWRCURR3
-#undef D_Strom_L1
-#undef D_Strom_L2
-#undef D_Strom_L3
-#undef D_Spannung_L1
-#undef D_Spannung_L2
-#undef D_Spannung_L3
-#undef D_METERNR
-#undef D_METERSID
-#undef D_GasIN
-#undef D_H2oIN
-#undef D_StL1L2L3
-#undef D_SpL1L2L3
-
-#define D_TPWRIN "Total-In"
-#define D_TPWROUT "Total-Out"
-#define D_TPWRCURR "Current-In/Out"
-#define D_TPWRCURR1 "Current-In p1"
-#define D_TPWRCURR2 "Current-In p2"
-#define D_TPWRCURR3 "Current-In p3"
-#define D_Strom_L1 "Current L1"
-#define D_Strom_L2 "Current L2"
-#define D_Strom_L3 "Current L3"
-#define D_Spannung_L1 "Voltage L1"
-#define D_Spannung_L2 "Voltage L2"
-#define D_Spannung_L3 "Voltage L3"
-#define D_METERNR "Meter_number"
-#define D_METERSID "Service ID"
-#define D_GasIN "Counter"                // Gas-Verbrauch
-#define D_H2oIN "Counter"                // H2o-Verbrauch
-#define D_StL1L2L3 "Current L1+L2+L3"
-#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
-
-#endif
-
 // JSON Strings do not translate
 // max 23 char
 #define DJ_TPWRIN "Total_in"