mirror of https://github.com/arendst/Tasmota.git
Merge pull request #3866 from andrethomas/development
PCA9685 I2C Hardware PWM - Experimental initial commit
This commit is contained in:
Theo Arends
GitHub
commit
f4adef1f90
|
|
@ -298,6 +298,8 @@
|
|||
// #define USE_MCP230xx_ADDR 0x20 // Enable MCP23008/MCP23017 I2C Address to use (Must be within range 0x20 through 0x27 - set according to your wired setup)
|
||||
// #define USE_MCP230xx_OUTPUT // Enable MCP23008/MCP23017 OUTPUT support through sensor29 commands (+1k5 code)
|
||||
// #define USE_MCP230xx_DISPLAYOUTPUT // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
|
||||
// #define USE_PCA9685 // Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
// #define USE_PCA9685_ADDR 0x40 // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
|
||||
// #define USE_MPR121 // Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
||||
// #define USE_CCS811 // Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
||||
// #define USE_MPU6050 // Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,184 @@
|
|||
/*
|
||||
xdrv_15_pca9685.ino - Support for I2C PCA9685 12bit 16 pin hardware PWM driver
|
||||
|
||||
Copyright (C) 2018 Andre Thomas and Theo Arends
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifdef USE_I2C
|
||||
#ifdef USE_PCA9685
|
||||
|
||||
#define XDRV_15 15
|
||||
|
||||
#define PCA9685_REG_MODE1 0x00
|
||||
#define PCA9685_REG_LED0_ON_L 0x06
|
||||
#define PCA9685_REG_PRE_SCALE 0xFE
|
||||
|
||||
uint8_t pca9685_detected = 0;
|
||||
uint16_t pca9685_freq = 50;
|
||||
|
||||
void PCA9685_Detect(void)
|
||||
{
|
||||
if (pca9685_detected) { return; }
|
||||
|
||||
uint8_t buffer;
|
||||
|
||||
if (I2cValidRead8(&buffer, USE_PCA9685_ADDR, PCA9685_REG_MODE1)) {
|
||||
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, 0x20);
|
||||
if (I2cValidRead8(&buffer, USE_PCA9685_ADDR, PCA9685_REG_MODE1)) {
|
||||
if (0x20 == buffer) {
|
||||
pca9685_detected = 1;
|
||||
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "PCA9685", USE_PCA9685_ADDR);
|
||||
AddLog(LOG_LEVEL_DEBUG);
|
||||
PCA9685_Reset(); // Reset the controller
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void PCA9685_Reset(void)
|
||||
{
|
||||
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, 0x80);
|
||||
PCA9685_SetPWMfreq(50);
|
||||
for (uint8_t pin=0;pin<16;pin++) {
|
||||
PCA9685_SetPWM(pin,0,false);
|
||||
}
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"PCA9685\":{\"RESET\":\"OK\"}}"));
|
||||
}
|
||||
|
||||
void PCA9685_SetPWMfreq(double freq) {
|
||||
/*
|
||||
7.3.5 from datasheet
|
||||
prescale value = round(25000000/(4096*freq))-1;
|
||||
*/
|
||||
pca9685_freq=freq;
|
||||
uint8_t pre_scale_osc = round(25000000/(4096*freq))-1;
|
||||
if (1526 == freq) pre_scale_osc=0xFF; // force setting for 24hz because rounding causes 1526 to be 254
|
||||
uint8_t current_mode1 = I2cRead8(USE_PCA9685_ADDR, PCA9685_REG_MODE1); // read current value of MODE1 register
|
||||
uint8_t sleep_mode1 = (current_mode1&0x7F) | 0x10; // Determine register value to put PCA to sleep
|
||||
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, sleep_mode1); // Let's sleep a little
|
||||
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_PRE_SCALE, pre_scale_osc); // Set the pre-scaler
|
||||
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, current_mode1 | 0xA0); // Reset MODE1 register to original state and enable auto increment
|
||||
}
|
||||
|
||||
void PCA9685_SetPWM_Reg(uint8_t pin, uint16_t on, uint16_t off) {
|
||||
uint8_t led_reg = PCA9685_REG_LED0_ON_L + 4 * pin;
|
||||
uint32_t led_data = 0;
|
||||
I2cWrite8(USE_PCA9685_ADDR, led_reg, on);
|
||||
I2cWrite8(USE_PCA9685_ADDR, led_reg+1, (on >> 8));
|
||||
I2cWrite8(USE_PCA9685_ADDR, led_reg+2, off);
|
||||
I2cWrite8(USE_PCA9685_ADDR, led_reg+3, (off >> 8));
|
||||
}
|
||||
|
||||
void PCA9685_SetPWM(uint8_t pin, uint16_t pwm, bool inverted) {
|
||||
if (4096 == pwm) {
|
||||
PCA9685_SetPWM_Reg(pin, 4096, 0); // Special use additional bit causes channel to turn on completely without PWM
|
||||
} else {
|
||||
PCA9685_SetPWM_Reg(pin, 0, pwm);
|
||||
}
|
||||
}
|
||||
|
||||
bool PCA9685_Command(void)
|
||||
{
|
||||
boolean serviced = true;
|
||||
boolean validpin = false;
|
||||
uint8_t paramcount = 0;
|
||||
if (XdrvMailbox.data_len > 0) {
|
||||
paramcount=1;
|
||||
} else {
|
||||
serviced = false;
|
||||
return serviced;
|
||||
}
|
||||
char sub_string[XdrvMailbox.data_len];
|
||||
for (uint8_t ca=0;ca<XdrvMailbox.data_len;ca++) {
|
||||
if ((' ' == XdrvMailbox.data[ca]) || ('=' == XdrvMailbox.data[ca])) { XdrvMailbox.data[ca] = ','; }
|
||||
if (',' == XdrvMailbox.data[ca]) { paramcount++; }
|
||||
}
|
||||
UpperCase(XdrvMailbox.data,XdrvMailbox.data);
|
||||
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 1),"RESET")) { PCA9685_Reset(); return serviced; }
|
||||
|
||||
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 1),"PWMF")) {
|
||||
if (paramcount > 1) {
|
||||
uint16_t new_freq = atoi(subStr(sub_string, XdrvMailbox.data, ",", 2));
|
||||
if ((new_freq >= 24) && (new_freq <= 1526)) {
|
||||
PCA9685_SetPWMfreq(new_freq);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"PCA9685\":{\"PWMF\":%i, \"Result\":\"OK\"}}"));
|
||||
return serviced;
|
||||
}
|
||||
} else { // No parameter was given for setfreq, so we return current setting
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"PCA9685\":{\"PWMF\":%i}}"),pca9685_freq);
|
||||
return serviced;
|
||||
}
|
||||
}
|
||||
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 1),"PWM")) {
|
||||
if (paramcount > 1) {
|
||||
uint8_t pin = atoi(subStr(sub_string, XdrvMailbox.data, ",", 2));
|
||||
if (paramcount > 2) {
|
||||
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 3), "ON")) {
|
||||
PCA9685_SetPWM(pin, 4096, false);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"PCA9685\":{\"PIN\":%i,\"PWM\":%i}}"),pin,4096);
|
||||
serviced = true;
|
||||
return serviced;
|
||||
}
|
||||
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 3), "OFF")) {
|
||||
PCA9685_SetPWM(pin, 0, false);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"PCA9685\":{\"PIN\":%i,\"PWM\":%i}}"),pin,0);
|
||||
serviced = true;
|
||||
return serviced;
|
||||
}
|
||||
uint16_t pwm = atoi(subStr(sub_string, XdrvMailbox.data, ",", 3));
|
||||
if ((pin >= 0 && pin <= 15) && (pwm >= 0 && pwm <= 4096)) {
|
||||
PCA9685_SetPWM(pin, pwm, false);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"PCA9685\":{\"PIN\":%i,\"PWM\":%i}}"),pin,pwm);
|
||||
serviced = true;
|
||||
return serviced;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
return serviced;
|
||||
}
|
||||
|
||||
boolean Xdrv15(byte function)
|
||||
{
|
||||
boolean result = false;
|
||||
|
||||
if (i2c_flg) {
|
||||
switch (function) {
|
||||
case FUNC_MQTT_DATA:
|
||||
break;
|
||||
case FUNC_EVERY_SECOND:
|
||||
PCA9685_Detect();
|
||||
break;
|
||||
case FUNC_EVERY_50_MSECOND:
|
||||
break;
|
||||
case FUNC_JSON_APPEND:
|
||||
break;
|
||||
case FUNC_COMMAND:
|
||||
if (XDRV_15 == XdrvMailbox.index) {
|
||||
PCA9685_Command();
|
||||
}
|
||||
break;
|
||||
case FUNC_WEB_APPEND:
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
#endif // USE_PCA9685
|
||||
#endif // USE_IC2
|
||||
Loading…
Reference in New Issue