mirror of https://github.com/arendst/Tasmota.git
Revert "Merge pull request #9121 from Jason2866/rc_switch"
This reverts commitb827b6ca20, reversing changes made to39ca0d6c72.
This commit is contained in:
Theo Arends
parent
3308b7a995
commit
f6128bdae3
|
|
@ -0,0 +1,69 @@
|
|||
language: c
|
||||
python:
|
||||
- "2.7"
|
||||
|
||||
# Cache PlatformIO packages using Travis CI container-based infrastructure
|
||||
cache:
|
||||
pip: true
|
||||
directories:
|
||||
- "~/.platformio"
|
||||
|
||||
env:
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/Webserver
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/Webserver.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/ReceiveDemo_Simple
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/ReceiveDemo_Simple.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/TypeC_Intertechno
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/TypeC_Intertechno.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01 --board=attiny25 --board=attiny24"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/TypeD_REV
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/TypeD_REV.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01 --board=attiny25 --board=attiny24"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/TypeA_WithDIPSwitches
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/TypeA_WithDIPSwitches.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01 --board=attiny25 --board=attiny24"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/TypeA_WithDIPSwitches_Lightweight
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/TypeA_WithDIPSwitches_Lightweight.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01 --board=attiny25 --board=attiny24"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/TypeB_WithRotaryOrSlidingSwitches
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/TypeB_WithRotaryOrSlidingSwitches.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01 --board=attiny25 --board=attiny24"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/SendDemo
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/SendDemo.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01"
|
||||
- >
|
||||
PLATFORMIO_CI_SRC=$PWD/examples/ReceiveDemo_Advanced
|
||||
ARDUINOIDE_CI_SRC=$PLATFORMIO_CI_SRC/ReceiveDemo_Advanced.ino
|
||||
BOARDS="--board=diecimilaatmega328 --board=uno --board=esp01"
|
||||
|
||||
before_install:
|
||||
# Arduino IDE
|
||||
- "/sbin/start-stop-daemon --start --quiet --pidfile /tmp/custom_xvfb_1.pid --make-pidfile --background --exec /usr/bin/Xvfb -- :1 -ac -screen 0 1280x1024x16"
|
||||
- sleep 3
|
||||
- export DISPLAY=:1.0
|
||||
- wget http://downloads.arduino.cc/arduino-1.6.9-linux64.tar.xz
|
||||
- tar xf arduino-1.6.9-linux64.tar.xz
|
||||
- sudo mv arduino-1.6.9 /usr/local/share/arduino
|
||||
- sudo ln -s /usr/local/share/arduino/arduino /usr/local/bin/arduino
|
||||
|
||||
install:
|
||||
# Arduino IDE
|
||||
- ln -s $PWD /usr/local/share/arduino/libraries/rc-switch
|
||||
# PlatformIO
|
||||
- sudo pip install -U platformio
|
||||
|
||||
script:
|
||||
# Arduino IDE
|
||||
- arduino --verify --board arduino:avr:uno ${ARDUINOIDE_CI_SRC}
|
||||
# PlatformIO
|
||||
- platformio ci --lib="." ${BOARDS}
|
||||
|
|
@ -13,26 +13,25 @@
|
|||
- Robert ter Vehn / <first name>.<last name>(at)gmail(dot)com
|
||||
- Johann Richard / <first name>.<last name>(at)gmail(dot)com
|
||||
- Vlad Gheorghe / <first name>.<last name>(at)gmail(dot)com https://github.com/vgheo
|
||||
- Matias Cuenca-Acuna
|
||||
|
||||
Project home: https://github.com/sui77/rc-switch/
|
||||
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#define KeeLoq_NLF 0x3A5C742EUL
|
||||
|
||||
#include "RCSwitch.h"
|
||||
|
||||
#ifdef RaspberryPi
|
||||
|
|
@ -56,77 +55,42 @@
|
|||
#endif
|
||||
|
||||
|
||||
/* Protocol description format
|
||||
*
|
||||
* {Pulse length, Preamble, Sync bit, "0" bit, "1" bit, Inverted Signal, Guard time}
|
||||
/* Format for protocol definitions:
|
||||
* {pulselength, Sync bit, "0" bit, "1" bit, invertedSignal}
|
||||
*
|
||||
* Pulse length: pulse duration Te in microseconds,
|
||||
* example 350
|
||||
* Preamble: Alternating high and low levels
|
||||
* {20, 1} means 20 alternations of 1 Te duration
|
||||
* _ _ _ _ _ _ _ _ _ _
|
||||
* | |_| |_| |_| |_| |_| |_| |_| |_| |_| |_
|
||||
* Sync bit: Header and clock
|
||||
* {1, 31} means 1 pulse long Te high and 31 low
|
||||
* pulselength: pulse length in microseconds, e.g. 350
|
||||
* Sync bit: {1, 31} means 1 high pulse and 31 low pulses
|
||||
* (perceived as a 31*pulselength long pulse, total length of sync bit is
|
||||
* 32*pulselength microseconds), i.e:
|
||||
* _
|
||||
* | |_______________________________ (don't count the vertical bars)
|
||||
* "0" bit: pulse shape defining a data bit, which is a logical "0"
|
||||
* {1, 3} means 1 pulse duration Te high level and 3 low
|
||||
* "0" bit: waveform for a data bit of value "0", {1, 3} means 1 high pulse
|
||||
* and 3 low pulses, total length (1+3)*pulselength, i.e:
|
||||
* _
|
||||
* | |___
|
||||
* "1" bit: pulse shape that defines the data bit, which is a logical "1"
|
||||
* {3, 1} means 3 pulses with a duration of Te high level and 1 low
|
||||
* "1" bit: waveform for a data bit of value "1", e.g. {3,1}:
|
||||
* ___
|
||||
* | |_
|
||||
*
|
||||
* (note: to form the state bit Z (Tri-State bit), these two codes are combined)
|
||||
* Inverted Signal: Signal inversion - if true the signal is inverted
|
||||
* replacing high to low in a transmitted / received packet
|
||||
* Guard time: Safety time, followed by the next preamble of the next packet
|
||||
* for example 39 pulses of low duration Te
|
||||
* These are combined to form Tri-State bits when sending or receiving codes.
|
||||
*/
|
||||
#if defined(ESP8266) || defined(ESP32)
|
||||
static const VAR_ISR_ATTR RCSwitch::Protocol proto[] = {
|
||||
#else
|
||||
static const RCSwitch::Protocol PROGMEM proto[] = {
|
||||
#endif
|
||||
{ 350, 0, { 0, 0 }, 1, { 1, 31 }, { 1, 3 }, { 3, 1 }, false, 0 }, // 01 (Princeton, PT-2240)
|
||||
{ 650, 0, { 0, 0 }, 1, { 1, 10 }, { 1, 2 }, { 2, 1 }, false, 0 }, // 02
|
||||
{ 100, 0, { 0, 0 }, 1, { 30, 71 }, { 4, 11 }, { 9, 6 }, false, 0 }, // 03
|
||||
{ 380, 0, { 0, 0 }, 1, { 1, 6 }, { 1, 3 }, { 3, 1 }, false, 0 }, // 04
|
||||
{ 500, 0, { 0, 0 }, 1, { 6, 14 }, { 1, 2 }, { 2, 1 }, false, 0 }, // 05
|
||||
{ 450, 0, { 0, 0 }, 1, { 23, 1 }, { 1, 2 }, { 2, 1 }, true, 0 }, // 06 (HT6P20B)
|
||||
{ 150, 0, { 0, 0 }, 1, { 2, 62 }, { 1, 6 }, { 6, 1 }, false, 0 }, // 07 (HS2303-PT, i. e. used in AUKEY Remote)
|
||||
{ 320, 0, { 0, 0 }, 1, { 36, 1 }, { 1, 2 }, { 2, 1 }, true, 0 }, // 08 (Came 12bit, HT12E)
|
||||
{ 700, 0, { 0, 0 }, 1, { 32, 1 }, { 1, 2 }, { 2, 1 }, true, 0 }, // 09 (Nice_Flo 12bit)
|
||||
{ 420, 0, { 0, 0 }, 1, { 60, 6 }, { 1, 2 }, { 2, 1 }, true, 0 }, // 10 (V2 phoenix)
|
||||
{ 500, 2, { 3, 3 }, 0, { 0, 0 }, { 1, 2 }, { 2, 1 }, false, 37 }, // 11 (Nice_FloR-S 52bit)
|
||||
{ 400, 23, { 1, 1 }, 1, { 0, 9 }, { 2, 1 }, { 1, 2 }, false, 39 }, // 12 (Keeloq 64/66)
|
||||
{ 300, 6, { 2, 2 }, 3, { 8, 3 }, { 2, 2 }, { 3, 3 }, false, 0 }, // 13 test (CFM)
|
||||
{ 250, 12, { 4, 4 }, 0, { 0, 0 }, { 1, 1 }, { 2, 2 }, false, 0 }, // 14 test (StarLine)
|
||||
{ 500, 0, { 0, 0 }, 0, { 100, 1 }, { 1, 2 }, { 2, 1 }, false, 35 }, // 15
|
||||
|
||||
{ 361, 0, { 0, 0 }, 1, { 52, 1 }, { 1, 3 }, { 3, 1 }, true, 0 }, // 16 (Einhell)
|
||||
{ 500, 0, { 0, 0 }, 1, { 1, 23 }, { 1, 2 }, { 2, 1 }, false, 0 }, // 17 (InterTechno PAR-1000)
|
||||
{ 180, 0, { 0, 0 }, 1, { 1, 15 }, { 1, 1 }, { 1, 8 }, false, 0 }, // 18 (Intertechno ITT-1500)
|
||||
{ 350, 0, { 0, 0 }, 1, { 1, 2 }, { 0, 2 }, { 3, 2 }, false, 0 }, // 19 (Murcury)
|
||||
{ 150, 0, { 0, 0 }, 1, { 34, 3 }, { 1, 3 }, { 3, 1 }, false, 0 }, // 20 (AC114)
|
||||
{ 360, 0, { 0, 0 }, 1, { 13, 4 }, { 1, 2 }, { 2, 1 }, false, 0 }, // 21 (DC250)
|
||||
{ 650, 0, { 0, 0 }, 1, { 1, 10 }, { 1, 2 }, { 2, 1 }, true, 0 }, // 22 (Mandolyn/Lidl TR-502MSV/RC-402/RC-402DX)
|
||||
{ 641, 0, { 0, 0 }, 1, { 115, 1 }, { 1, 2 }, { 2, 1 }, true, 0 }, // 23 (Lidl TR-502MSV/RC-402 - Flavien)
|
||||
{ 620, 0, { 0, 0 }, 1, { 0, 64 }, { 0, 1 }, { 1, 0 }, false, 0 }, // 24 (Lidl TR-502MSV/RC701)
|
||||
{ 560, 0, { 0, 0 }, 1, { 16, 8 }, { 1, 1 }, { 1, 3 }, false, 0 }, // 25 (NEC)
|
||||
{ 385, 0, { 0, 0 }, 1, { 1, 17 }, { 1, 2 }, { 2, 1 }, false, 0 }, // 26 (Arlec RC210)
|
||||
{ 188, 0, { 0, 0 }, 1, { 1, 31 }, { 1, 3 }, { 3, 1 }, false, 0 }, // 27 (Zap, FHT-7901)
|
||||
|
||||
{ 700, 1, { 0, 1 }, 1, { 116, 0 }, { 1, 2 }, { 2, 1 }, true, 0 }, // 28 (Quigg GT-7000) from @Tho85 https://github.com/sui77/rc-switch/pull/115
|
||||
{ 220, 0, { 0, 0 }, 1, { 1, 46 }, { 1, 6 }, { 1, 1 }, false, 2 }, // 29 (NEXA)
|
||||
{ 260, 0, { 0, 0 }, 1, { 1, 8 }, { 1, 4 }, { 4, 1 }, true, 0 }, // 30 (Anima)
|
||||
|
||||
{ 400, 0, { 0, 0 }, 1, { 1, 1 }, { 1, 2 }, { 2, 1 }, false, 43 }, // 31 (Mertik Maxitrol G6R-H4T1)
|
||||
{ 365, 0, { 0, 0 }, 1, { 18, 1 }, { 3, 1 }, { 1, 3 }, true, 0 }, // 32 (1ByOne Doorbell) from @Fatbeard https://github.com/sui77/rc-switch/pull/277
|
||||
{ 340, 0, { 0, 0 }, 1, { 14, 4 }, { 1, 2 }, { 2, 1 }, false, 0 }, // 33 (Dooya Control DC2708L)
|
||||
{ 120, 0, { 0, 0 }, 1, { 1, 28 }, { 1, 3 }, { 3, 1 }, false, 0 } // 34 DIGOO SD10
|
||||
{ 350, { 1, 31 }, { 1, 3 }, { 3, 1 }, false }, // protocol 1
|
||||
{ 650, { 1, 10 }, { 1, 2 }, { 2, 1 }, false }, // protocol 2
|
||||
{ 100, { 30, 71 }, { 4, 11 }, { 9, 6 }, false }, // protocol 3
|
||||
{ 380, { 1, 6 }, { 1, 3 }, { 3, 1 }, false }, // protocol 4
|
||||
{ 500, { 6, 14 }, { 1, 2 }, { 2, 1 }, false }, // protocol 5
|
||||
{ 450, { 23, 1 }, { 1, 2 }, { 2, 1 }, true }, // protocol 6 (HT6P20B)
|
||||
{ 150, { 2, 62 }, { 1, 6 }, { 6, 1 }, false }, // protocol 7 (HS2303-PT, i. e. used in AUKEY Remote)
|
||||
{ 200, { 3, 130}, { 7, 16 }, { 3, 16}, false}, // protocol 8 Conrad RS-200 RX
|
||||
{ 200, { 130, 7 }, { 16, 7 }, { 16, 3 }, true}, // protocol 9 Conrad RS-200 TX
|
||||
{ 365, { 18, 1 }, { 3, 1 }, { 1, 3 }, true }, // protocol 10 (1ByOne Doorbell)
|
||||
{ 270, { 36, 1 }, { 1, 2 }, { 2, 1 }, true }, // protocol 11 (HT12E)
|
||||
{ 320, { 36, 1 }, { 1, 2 }, { 2, 1 }, true } // protocol 12 (SM5212)
|
||||
};
|
||||
|
||||
enum {
|
||||
|
|
@ -134,23 +98,21 @@ enum {
|
|||
};
|
||||
|
||||
#if not defined( RCSwitchDisableReceiving )
|
||||
volatile unsigned long long RCSwitch::nReceivedValue = 0;
|
||||
volatile unsigned long RCSwitch::nReceivedValue = 0;
|
||||
volatile unsigned int RCSwitch::nReceivedBitlength = 0;
|
||||
volatile unsigned int RCSwitch::nReceivedDelay = 0;
|
||||
volatile unsigned int RCSwitch::nReceivedProtocol = 0;
|
||||
int RCSwitch::nReceiveTolerance = 60;
|
||||
const unsigned int RCSwitch::nSeparationLimit = 2600; // 4300 default
|
||||
const unsigned int RCSwitch::nSeparationLimit = 4300;
|
||||
// separationLimit: minimum microseconds between received codes, closer codes are ignored.
|
||||
// according to discussion on issue #14 it might be more suitable to set the separation
|
||||
// limit to the same time as the 'low' part of the sync signal for the current protocol.
|
||||
// should be set to the minimum value of pulselength * the sync signal
|
||||
unsigned int RCSwitch::timings[RCSWITCH_MAX_CHANGES];
|
||||
unsigned int RCSwitch::buftimings[4];
|
||||
#endif
|
||||
|
||||
RCSwitch::RCSwitch() {
|
||||
this->nTransmitterPin = -1;
|
||||
this->setRepeatTransmit(5);
|
||||
this->setRepeatTransmit(10);
|
||||
this->setProtocol(1);
|
||||
#if not defined( RCSwitchDisableReceiving )
|
||||
this->nReceiverInterrupt = -1;
|
||||
|
|
@ -490,7 +452,7 @@ char* RCSwitch::getCodeWordD(char sGroup, int nDevice, bool bStatus) {
|
|||
*/
|
||||
void RCSwitch::sendTriState(const char* sCodeWord) {
|
||||
// turn the tristate code word into the corresponding bit pattern, then send it
|
||||
unsigned long long code = 0;
|
||||
unsigned long code = 0;
|
||||
unsigned int length = 0;
|
||||
for (const char* p = sCodeWord; *p; p++) {
|
||||
code <<= 2L;
|
||||
|
|
@ -500,11 +462,11 @@ void RCSwitch::sendTriState(const char* sCodeWord) {
|
|||
break;
|
||||
case 'F':
|
||||
// bit pattern 01
|
||||
code |= 1ULL;
|
||||
code |= 1L;
|
||||
break;
|
||||
case '1':
|
||||
// bit pattern 11
|
||||
code |= 3ULL;
|
||||
code |= 3L;
|
||||
break;
|
||||
}
|
||||
length += 2;
|
||||
|
|
@ -512,37 +474,17 @@ void RCSwitch::sendTriState(const char* sCodeWord) {
|
|||
this->send(code, length);
|
||||
}
|
||||
|
||||
/**
|
||||
* @param duration no. of microseconds to delay
|
||||
*/
|
||||
static inline void safeDelayMicroseconds(unsigned long duration) {
|
||||
#if defined(ESP8266) || defined(ESP32)
|
||||
if (duration > 10000) {
|
||||
// if delay > 10 milliseconds, use yield() to avoid wdt reset
|
||||
unsigned long start = micros();
|
||||
while ((micros() - start) < duration) {
|
||||
yield();
|
||||
}
|
||||
}
|
||||
else {
|
||||
delayMicroseconds(duration);
|
||||
}
|
||||
#else
|
||||
delayMicroseconds(duration);
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @param sCodeWord a binary code word consisting of the letter 0, 1
|
||||
*/
|
||||
void RCSwitch::send(const char* sCodeWord) {
|
||||
// turn the tristate code word into the corresponding bit pattern, then send it
|
||||
unsigned long long code = 0;
|
||||
unsigned long code = 0;
|
||||
unsigned int length = 0;
|
||||
for (const char* p = sCodeWord; *p; p++) {
|
||||
code <<= 1ULL;
|
||||
code <<= 1L;
|
||||
if (*p != '0')
|
||||
code |= 1ULL;
|
||||
code |= 1L;
|
||||
length++;
|
||||
}
|
||||
this->send(code, length);
|
||||
|
|
@ -553,7 +495,7 @@ void RCSwitch::send(const char* sCodeWord) {
|
|||
* bits are sent from MSB to LSB, i.e., first the bit at position length-1,
|
||||
* then the bit at position length-2, and so on, till finally the bit at position 0.
|
||||
*/
|
||||
void RCSwitch::send(unsigned long long code, unsigned int length) {
|
||||
void RCSwitch::send(unsigned long code, unsigned int length) {
|
||||
if (this->nTransmitterPin == -1)
|
||||
return;
|
||||
|
||||
|
|
@ -565,41 +507,14 @@ void RCSwitch::send(unsigned long long code, unsigned int length) {
|
|||
}
|
||||
#endif
|
||||
|
||||
// repeat sending the packet nRepeatTransmit times
|
||||
for (int nRepeat = 0; nRepeat < nRepeatTransmit; nRepeat++) {
|
||||
// send the preamble
|
||||
for (int i = 0; i < ((protocol.PreambleFactor / 2) + (protocol.PreambleFactor %2 )); i++) {
|
||||
this->transmit({protocol.Preamble.high, protocol.Preamble.low});
|
||||
}
|
||||
// send the header
|
||||
if (protocol.HeaderFactor > 0) {
|
||||
for (int i = 0; i < protocol.HeaderFactor; i++) {
|
||||
this->transmit(protocol.Header);
|
||||
}
|
||||
}
|
||||
// send the code
|
||||
for (int i = length - 1; i >= 0; i--) {
|
||||
if (code & (1ULL << i))
|
||||
for (int i = length-1; i >= 0; i--) {
|
||||
if (code & (1L << i))
|
||||
this->transmit(protocol.one);
|
||||
else
|
||||
this->transmit(protocol.zero);
|
||||
}
|
||||
// for kilok, there should be a duration of 66, and 64 significant data codes are stored
|
||||
// send two more bits for even count
|
||||
if (length == 64) {
|
||||
if (nRepeat == 0) {
|
||||
this->transmit(protocol.zero);
|
||||
this->transmit(protocol.zero);
|
||||
} else {
|
||||
this->transmit(protocol.one);
|
||||
this->transmit(protocol.one);
|
||||
}
|
||||
}
|
||||
// Set the guard Time
|
||||
if (protocol.Guard > 0) {
|
||||
digitalWrite(this->nTransmitterPin, LOW);
|
||||
safeDelayMicroseconds(this->protocol.pulseLength * protocol.Guard);
|
||||
}
|
||||
this->transmit(protocol.syncFactor);
|
||||
}
|
||||
|
||||
// Disable transmit after sending (i.e., for inverted protocols)
|
||||
|
|
@ -620,14 +535,10 @@ void RCSwitch::transmit(HighLow pulses) {
|
|||
uint8_t firstLogicLevel = (this->protocol.invertedSignal) ? LOW : HIGH;
|
||||
uint8_t secondLogicLevel = (this->protocol.invertedSignal) ? HIGH : LOW;
|
||||
|
||||
if (pulses.high > 0) {
|
||||
digitalWrite(this->nTransmitterPin, firstLogicLevel);
|
||||
delayMicroseconds( this->protocol.pulseLength * pulses.high);
|
||||
}
|
||||
if (pulses.low > 0) {
|
||||
digitalWrite(this->nTransmitterPin, secondLogicLevel);
|
||||
delayMicroseconds( this->protocol.pulseLength * pulses.low);
|
||||
}
|
||||
digitalWrite(this->nTransmitterPin, firstLogicLevel);
|
||||
delayMicroseconds( this->protocol.pulseLength * pulses.high);
|
||||
digitalWrite(this->nTransmitterPin, secondLogicLevel);
|
||||
delayMicroseconds( this->protocol.pulseLength * pulses.low);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -670,7 +581,7 @@ void RCSwitch::resetAvailable() {
|
|||
RCSwitch::nReceivedValue = 0;
|
||||
}
|
||||
|
||||
unsigned long long RCSwitch::getReceivedValue() {
|
||||
unsigned long RCSwitch::getReceivedValue() {
|
||||
return RCSwitch::nReceivedValue;
|
||||
}
|
||||
|
||||
|
|
@ -706,41 +617,12 @@ bool RECEIVE_ATTR RCSwitch::receiveProtocol(const int p, unsigned int changeCoun
|
|||
memcpy_P(&pro, &proto[p-1], sizeof(Protocol));
|
||||
#endif
|
||||
|
||||
unsigned long long code = 0;
|
||||
unsigned int FirstTiming = 0;
|
||||
if (pro.PreambleFactor > 0) {
|
||||
FirstTiming = pro.PreambleFactor + 1;
|
||||
}
|
||||
unsigned int BeginData = 0;
|
||||
if (pro.HeaderFactor > 0) {
|
||||
BeginData = (pro.invertedSignal) ? (2) : (1);
|
||||
// Header pulse count correction for more than one
|
||||
if (pro.HeaderFactor > 1) {
|
||||
BeginData += (pro.HeaderFactor - 1) * 2;
|
||||
}
|
||||
}
|
||||
//Assuming the longer pulse length is the pulse captured in timings[FirstTiming]
|
||||
// берем наибольшее значение из Header
|
||||
const unsigned int syncLengthInPulses = ((pro.Header.low) > (pro.Header.high)) ? (pro.Header.low) : (pro.Header.high);
|
||||
// определяем длительность Te как длительность первого импульса header деленную на количество импульсов в нем
|
||||
// или как длительность импульса preamble деленную на количество Te в нем
|
||||
unsigned int sdelay = 0;
|
||||
if (syncLengthInPulses > 0) {
|
||||
sdelay = RCSwitch::timings[FirstTiming] / syncLengthInPulses;
|
||||
} else {
|
||||
sdelay = RCSwitch::timings[FirstTiming-2] / pro.PreambleFactor;
|
||||
}
|
||||
const unsigned int delay = sdelay;
|
||||
// nReceiveTolerance = 60
|
||||
// допустимое отклонение длительностей импульсов на 60 %
|
||||
unsigned long code = 0;
|
||||
//Assuming the longer pulse length is the pulse captured in timings[0]
|
||||
const unsigned int syncLengthInPulses = ((pro.syncFactor.low) > (pro.syncFactor.high)) ? (pro.syncFactor.low) : (pro.syncFactor.high);
|
||||
const unsigned int delay = RCSwitch::timings[0] / syncLengthInPulses;
|
||||
const unsigned int delayTolerance = delay * RCSwitch::nReceiveTolerance / 100;
|
||||
|
||||
// 0 - sync перед preamble или data
|
||||
// BeginData - сдвиг на 1 или 2 от sync к preamble/data
|
||||
// FirstTiming - сдвиг на preamble к header
|
||||
// firstDataTiming первый импульс data
|
||||
// bitChangeCount - количество импульсов в data
|
||||
|
||||
/* For protocols that start low, the sync period looks like
|
||||
* _________
|
||||
* _____________| |XXXXXXXXXXXX|
|
||||
|
|
@ -758,16 +640,9 @@ bool RECEIVE_ATTR RCSwitch::receiveProtocol(const int p, unsigned int changeCoun
|
|||
*
|
||||
* The 2nd saved duration starts the data
|
||||
*/
|
||||
// если invertedSignal=false, то сигнал начинается с 1 элемента массива (высокий уровень)
|
||||
// если invertedSignal=true, то сигнал начинается со 2 элемента массива (низкий уровень)
|
||||
// добавляем поправку на Преамбулу и Хедер
|
||||
const unsigned int firstDataTiming = BeginData + FirstTiming;
|
||||
unsigned int bitChangeCount = changeCount - firstDataTiming - 1 + pro.invertedSignal;
|
||||
if (bitChangeCount > 128) {
|
||||
bitChangeCount = 128;
|
||||
}
|
||||
const unsigned int firstDataTiming = (pro.invertedSignal) ? (2) : (1);
|
||||
|
||||
for (unsigned int i = firstDataTiming; i < firstDataTiming + bitChangeCount; i += 2) {
|
||||
for (unsigned int i = firstDataTiming; i < changeCount - 1; i += 2) {
|
||||
code <<= 1;
|
||||
if (diff(RCSwitch::timings[i], delay * pro.zero.high) < delayTolerance &&
|
||||
diff(RCSwitch::timings[i + 1], delay * pro.zero.low) < delayTolerance) {
|
||||
|
|
@ -782,9 +657,9 @@ bool RECEIVE_ATTR RCSwitch::receiveProtocol(const int p, unsigned int changeCoun
|
|||
}
|
||||
}
|
||||
|
||||
if (bitChangeCount > 14) { // ignore very short transmissions: no device sends them, so this must be noise
|
||||
if (changeCount > 7) { // ignore very short transmissions: no device sends them, so this must be noise
|
||||
RCSwitch::nReceivedValue = code;
|
||||
RCSwitch::nReceivedBitlength = bitChangeCount / 2;
|
||||
RCSwitch::nReceivedBitlength = (changeCount - 1) / 2;
|
||||
RCSwitch::nReceivedDelay = delay;
|
||||
RCSwitch::nReceivedProtocol = p;
|
||||
return true;
|
||||
|
|
@ -797,63 +672,32 @@ void RECEIVE_ATTR RCSwitch::handleInterrupt() {
|
|||
|
||||
static unsigned int changeCount = 0;
|
||||
static unsigned long lastTime = 0;
|
||||
static byte repeatCount = 0;
|
||||
static unsigned int repeatCount = 0;
|
||||
|
||||
const long time = micros();
|
||||
const unsigned int duration = time - lastTime;
|
||||
|
||||
RCSwitch::buftimings[3]=RCSwitch::buftimings[2];
|
||||
RCSwitch::buftimings[2]=RCSwitch::buftimings[1];
|
||||
RCSwitch::buftimings[1]=RCSwitch::buftimings[0];
|
||||
RCSwitch::buftimings[0]=duration;
|
||||
|
||||
if (duration > RCSwitch::nSeparationLimit ||
|
||||
changeCount == 156 ||
|
||||
(diff(RCSwitch::buftimings[3], RCSwitch::buftimings[2]) < 50 &&
|
||||
diff(RCSwitch::buftimings[2], RCSwitch::buftimings[1]) < 50 &&
|
||||
changeCount > 25)) {
|
||||
// принят длинный импульс продолжительностью более nSeparationLimit (4300)
|
||||
if (duration > RCSwitch::nSeparationLimit) {
|
||||
// A long stretch without signal level change occurred. This could
|
||||
// be the gap between two transmission.
|
||||
if (diff(duration, RCSwitch::timings[0]) < 400 ||
|
||||
changeCount == 156 ||
|
||||
(diff(RCSwitch::buftimings[3], RCSwitch::timings[1]) < 50 &&
|
||||
diff(RCSwitch::buftimings[2], RCSwitch::timings[2]) < 50 &&
|
||||
diff(RCSwitch::buftimings[1], RCSwitch::timings[3]) < 50 &&
|
||||
changeCount > 25)) {
|
||||
// если его длительность отличается от первого импульса,
|
||||
// который приняли раньше, менее чем на +-200 (исходно 200)
|
||||
// то считаем это повторным пакетом и игнорируем его
|
||||
if ((repeatCount==0) || (diff(duration, RCSwitch::timings[0]) < 200)) {
|
||||
// This long signal is close in length to the long signal which
|
||||
// started the previously recorded timings; this suggests that
|
||||
// it may indeed by a a gap between two transmissions (we assume
|
||||
// here that a sender will send the signal multiple times,
|
||||
// with roughly the same gap between them).
|
||||
|
||||
// количество повторных пакетов
|
||||
repeatCount++;
|
||||
// при приеме второго повторного начинаем анализ принятого первым
|
||||
if (repeatCount == 1) {
|
||||
if (repeatCount == 2) {
|
||||
for(unsigned int i = 1; i <= numProto; i++) {
|
||||
if (receiveProtocol(i, changeCount)) {
|
||||
// receive succeeded for protocol i
|
||||
break;
|
||||
}
|
||||
}
|
||||
// очищаем количество повторных пакетов
|
||||
repeatCount = 0;
|
||||
}
|
||||
}
|
||||
// дительность отличается более чем на +-200 от первого
|
||||
// принятого ранее, очищаем счетчик для приема нового пакета
|
||||
changeCount = 0;
|
||||
if (diff(RCSwitch::buftimings[3], RCSwitch::buftimings[2]) < 50 &&
|
||||
diff(RCSwitch::buftimings[2], RCSwitch::buftimings[1]) < 50) {
|
||||
RCSwitch::timings[1]=RCSwitch::buftimings[3];
|
||||
RCSwitch::timings[2]=RCSwitch::buftimings[2];
|
||||
RCSwitch::timings[3]=RCSwitch::buftimings[1];
|
||||
changeCount = 4;
|
||||
}
|
||||
}
|
||||
|
||||
// detect overflow
|
||||
|
|
@ -862,118 +706,7 @@ void RECEIVE_ATTR RCSwitch::handleInterrupt() {
|
|||
repeatCount = 0;
|
||||
}
|
||||
|
||||
// заносим в массив длительность очередного принятого импульса
|
||||
if (changeCount > 0 && duration < 100) { // игнорируем шумовые всплески менее 100 мкс
|
||||
RCSwitch::timings[changeCount-1] += duration;
|
||||
} else {
|
||||
RCSwitch::timings[changeCount++] = duration;
|
||||
}
|
||||
RCSwitch::timings[changeCount++] = duration;
|
||||
lastTime = time;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Initilize Keeloq
|
||||
*/
|
||||
Keeloq::Keeloq() {
|
||||
_keyHigh = 0;
|
||||
_keyLow = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set Keeloq 64 bit cypher key
|
||||
*/
|
||||
void Keeloq::SetKey(unsigned long keyHigh, unsigned long keyLow) {
|
||||
_keyHigh = keyHigh;
|
||||
_keyLow = keyLow;
|
||||
}
|
||||
|
||||
/**
|
||||
* Get Key data
|
||||
*/
|
||||
unsigned long Keeloq::GetKey(bool HighLow) {
|
||||
if (HighLow) {
|
||||
return _keyHigh;
|
||||
}
|
||||
return _keyLow;
|
||||
}
|
||||
|
||||
/**
|
||||
* Encrypt Keeloq 32 bit data
|
||||
*/
|
||||
unsigned long Keeloq::Encrypt(unsigned long data) {
|
||||
unsigned long x = data;
|
||||
unsigned long r;
|
||||
int keyBitNo, index;
|
||||
unsigned long keyBitVal,bitVal;
|
||||
|
||||
for (r = 0; r < 528; r++) {
|
||||
keyBitNo = r & 63;
|
||||
if (keyBitNo < 32) {
|
||||
keyBitVal = bitRead(_keyLow,keyBitNo);
|
||||
} else {
|
||||
keyBitVal = bitRead(_keyHigh, keyBitNo - 32);
|
||||
}
|
||||
index = 1 * bitRead(x, 1) + 2 * bitRead(x, 9) + 4 * bitRead(x, 20) + 8 * bitRead(x, 26) + 16 * bitRead(x, 31);
|
||||
bitVal = bitRead(x, 0) ^ bitRead(x, 16) ^ bitRead(KeeLoq_NLF, index) ^ keyBitVal;
|
||||
x = (x >> 1) ^ bitVal << 31;
|
||||
}
|
||||
return x;
|
||||
}
|
||||
|
||||
/**
|
||||
* Decrypt Keeloq 32 bit data
|
||||
*/
|
||||
unsigned long Keeloq::Decrypt(unsigned long data) {
|
||||
unsigned long x = data;
|
||||
unsigned long r;
|
||||
int keyBitNo, index;
|
||||
unsigned long keyBitVal,bitVal;
|
||||
|
||||
for (r = 0; r < 528; r++) {
|
||||
keyBitNo = (15-r) & 63;
|
||||
if(keyBitNo < 32) {
|
||||
keyBitVal = bitRead(_keyLow,keyBitNo);
|
||||
} else {
|
||||
keyBitVal = bitRead(_keyHigh, keyBitNo - 32);
|
||||
}
|
||||
index = 1 * bitRead(x, 0) + 2 * bitRead(x, 8) + 4 * bitRead(x, 19) + 8 * bitRead(x, 25) + 16 * bitRead(x, 30);
|
||||
bitVal = bitRead(x, 31) ^ bitRead(x, 15) ^ bitRead(KeeLoq_NLF, index) ^ keyBitVal;
|
||||
x = (x << 1) ^ bitVal;
|
||||
}
|
||||
return x;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set Normal Learning Keeloq key
|
||||
*/
|
||||
void Keeloq::NormLearn(unsigned long FixSN) {
|
||||
unsigned long tmpFixSN;
|
||||
// заготовки для формируемого ключа
|
||||
unsigned long NewkeyHigh;
|
||||
unsigned long NewkeyLow;
|
||||
|
||||
tmpFixSN = FixSN & 0x0FFFFFFF;
|
||||
tmpFixSN |= 0x20000000;
|
||||
NewkeyLow = Decrypt(tmpFixSN);
|
||||
tmpFixSN = FixSN & 0x0FFFFFFF;
|
||||
tmpFixSN |= 0x60000000;
|
||||
NewkeyHigh = Decrypt(tmpFixSN);
|
||||
_keyHigh = NewkeyHigh;
|
||||
_keyLow = NewkeyLow;
|
||||
}
|
||||
|
||||
/**
|
||||
* Reflect a 32 bit package
|
||||
*/
|
||||
unsigned long Keeloq::ReflectPack(unsigned long PackSrc) {
|
||||
unsigned long long PackOut = 0;
|
||||
for (byte i = 0; i < 32; i++) {
|
||||
PackOut = PackOut << 1;
|
||||
if (PackSrc & 1) {
|
||||
PackOut = PackOut | 1;
|
||||
}
|
||||
PackSrc = PackSrc >> 1;
|
||||
}
|
||||
return PackOut;
|
||||
}
|
||||
|
|
@ -58,8 +58,7 @@
|
|||
|
||||
// Number of maximum high/Low changes per packet.
|
||||
// We can handle up to (unsigned long) => 32 bit * 2 H/L changes per bit + 2 for sync
|
||||
// Для keeloq нужно увеличить RCSWITCH_MAX_CHANGES до 23+1+66*2+1=157
|
||||
#define RCSWITCH_MAX_CHANGES 67 // default 67
|
||||
#define RCSWITCH_MAX_CHANGES 67
|
||||
|
||||
class RCSwitch {
|
||||
|
||||
|
|
@ -78,7 +77,7 @@ class RCSwitch {
|
|||
void switchOff(char sGroup, int nDevice);
|
||||
|
||||
void sendTriState(const char* sCodeWord);
|
||||
void send(unsigned long long code, unsigned int length);
|
||||
void send(unsigned long code, unsigned int length);
|
||||
void send(const char* sCodeWord);
|
||||
|
||||
#if not defined( RCSwitchDisableReceiving )
|
||||
|
|
@ -88,7 +87,7 @@ class RCSwitch {
|
|||
bool available();
|
||||
void resetAvailable();
|
||||
|
||||
unsigned long long getReceivedValue();
|
||||
unsigned long getReceivedValue();
|
||||
unsigned int getReceivedBitlength();
|
||||
unsigned int getReceivedDelay();
|
||||
unsigned int getReceivedProtocol();
|
||||
|
|
@ -121,11 +120,8 @@ class RCSwitch {
|
|||
struct Protocol {
|
||||
/** base pulse length in microseconds, e.g. 350 */
|
||||
uint16_t pulseLength;
|
||||
uint8_t PreambleFactor;
|
||||
HighLow Preamble;
|
||||
uint8_t HeaderFactor;
|
||||
HighLow Header;
|
||||
|
||||
HighLow syncFactor;
|
||||
HighLow zero;
|
||||
HighLow one;
|
||||
|
||||
|
|
@ -146,7 +142,6 @@ class RCSwitch {
|
|||
* FOO.low*pulseLength microseconds.
|
||||
*/
|
||||
bool invertedSignal;
|
||||
uint16_t Guard;
|
||||
};
|
||||
|
||||
void setProtocol(Protocol protocol);
|
||||
|
|
@ -172,7 +167,7 @@ class RCSwitch {
|
|||
|
||||
#if not defined( RCSwitchDisableReceiving )
|
||||
static int nReceiveTolerance;
|
||||
volatile static unsigned long long nReceivedValue;
|
||||
volatile static unsigned long nReceivedValue;
|
||||
volatile static unsigned int nReceivedBitlength;
|
||||
volatile static unsigned int nReceivedDelay;
|
||||
volatile static unsigned int nReceivedProtocol;
|
||||
|
|
@ -181,25 +176,9 @@ class RCSwitch {
|
|||
* timings[0] contains sync timing, followed by a number of bits
|
||||
*/
|
||||
static unsigned int timings[RCSWITCH_MAX_CHANGES];
|
||||
// буфер длительностей последних четырех пакетов, [0] - последний
|
||||
static unsigned int buftimings[4];
|
||||
#endif
|
||||
|
||||
|
||||
};
|
||||
|
||||
class Keeloq {
|
||||
public:
|
||||
Keeloq();
|
||||
void SetKey(unsigned long keyHigh, unsigned long keyLow);
|
||||
unsigned long GetKey(bool HighLow);
|
||||
unsigned long Encrypt(unsigned long data);
|
||||
unsigned long Decrypt(unsigned long data);
|
||||
void NormLearn(unsigned long FixSN);
|
||||
unsigned long ReflectPack(unsigned long PackSrc);
|
||||
private:
|
||||
unsigned long _keyHigh;
|
||||
unsigned long _keyLow;
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
@ -1,17 +1,15 @@
|
|||
**Fork of RC-SWITCH by @sui77**
|
||||
|
||||
# rc-switch
|
||||
[](https://travis-ci.org/1technophile/rc-switch)
|
||||
[](https://travis-ci.org/sui77/rc-switch)
|
||||
|
||||
Use your Arduino or Raspberry Pi to operate remote radio controlled devices
|
||||
|
||||
## Download
|
||||
https://github.com/1technophile/rc-switch/releases/latest
|
||||
https://github.com/sui77/rc-switch/releases/latest
|
||||
|
||||
rc-switch is also listed in the arduino library manager.
|
||||
|
||||
## Wiki
|
||||
https://github.com/1technophile/rc-switch/wiki
|
||||
https://github.com/sui77/rc-switch/wiki
|
||||
|
||||
## Info
|
||||
### Send RC codes
|
||||
|
|
@ -1,39 +0,0 @@
|
|||
# Continuous Integration (CI) is the practice, in software
|
||||
# engineering, of merging all developer working copies with a shared mainline
|
||||
# several times a day < https://docs.platformio.org/page/ci/index.html >
|
||||
#
|
||||
# Documentation:
|
||||
#
|
||||
# * Travis CI Embedded Builds with PlatformIO
|
||||
# < https://docs.travis-ci.com/user/integration/platformio/ >
|
||||
#
|
||||
# * PlatformIO integration with Travis CI
|
||||
# < https://docs.platformio.org/page/ci/travis.html >
|
||||
#
|
||||
# * User Guide for `platformio ci` command
|
||||
# < https://docs.platformio.org/page/userguide/cmd_ci.html >
|
||||
#
|
||||
#
|
||||
# Please choose one of the following templates (proposed below) and uncomment
|
||||
# it (remove "# " before each line) or use own configuration according to the
|
||||
# Travis CI documentation (see above).
|
||||
#
|
||||
|
||||
|
||||
#
|
||||
# Template #1: General project. Test it using existing `platformio.ini`.
|
||||
#
|
||||
matrix:
|
||||
include:
|
||||
- language: python
|
||||
python: 2.7
|
||||
sudo: false
|
||||
cache:
|
||||
directories:
|
||||
- "~/.platformio"
|
||||
install:
|
||||
- pip install -U platformio
|
||||
- platformio update
|
||||
script:
|
||||
- platformio run
|
||||
|
||||
|
|
@ -1,103 +0,0 @@
|
|||
; PlatformIO Project Configuration File
|
||||
;
|
||||
; Build options: build flags, source filter
|
||||
; Upload options: custom upload port, speed and extra flags
|
||||
; Library options: dependencies, extra library storages
|
||||
; Advanced options: extra scripting
|
||||
;
|
||||
; Please visit documentation for the other options and examples
|
||||
; https://docs.platformio.org/page/projectconf.html
|
||||
|
||||
[platformio]
|
||||
src_dir = examples/ReceiveDemo_Advanced
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; ENVIRONMENT CHOICE ;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;Uncomment the env line corresponding to your board and modules required, ;
|
||||
;you can also adapt the modules by removing the corresponding lines in the env detail ;
|
||||
; if you go to the build flag section of your env you will see that some user_config.h ;
|
||||
; parameters can be overwritten here, for example the gateway name. ;
|
||||
; If you want to avoid the lost of your environments at each update you can put them ;
|
||||
; into a separate file called prod_env.ini, it will be automatically read by pio ;
|
||||
; an example (prod_env.ini.example) is available into the same folder as this file. ;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
;default_envs = sonoff-basic-rfr3
|
||||
;default_envs = esp32dev-rf
|
||||
;default_envs = nodemcuv2-rf
|
||||
;default_envs = rf-wifi-gateway
|
||||
;default_envs = uno-rf
|
||||
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; ENVIRONMENTS PARAMETERS ;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;Libraries and parameters shared accross environements ;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
|
||||
|
||||
[env]
|
||||
lib_extra_dirs = .
|
||||
framework = arduino
|
||||
build_flags =
|
||||
-w ; supress all warnings
|
||||
monitor_speed = 115200
|
||||
|
||||
[com]
|
||||
esp8266_platform = espressif8266@2.2.3
|
||||
esp32_platform = espressif32@1.11.1
|
||||
atmelavr_platform = atmelavr@1.13.0
|
||||
|
||||
[com-esp]
|
||||
build_flags =
|
||||
${env.build_flags}
|
||||
|
||||
[com-arduino]
|
||||
build_flags =
|
||||
${env.build_flags}
|
||||
|
||||
[com-arduino-low-memory]
|
||||
build_flags =
|
||||
${env.build_flags}
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; ENVIRONMENTS LIST ;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;List of environments that can be build ;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
[env:esp32dev-rf]
|
||||
platform = ${com.esp32_platform}
|
||||
board = esp32dev
|
||||
build_flags =
|
||||
${com-esp.build_flags}
|
||||
|
||||
[env:nodemcuv2-rf]
|
||||
platform = ${com.esp8266_platform}
|
||||
board = nodemcuv2
|
||||
build_flags =
|
||||
${com-esp.build_flags}
|
||||
board_build.flash_mode = dout
|
||||
|
||||
[env:rf-wifi-gateway]
|
||||
platform = ${com.esp8266_platform}
|
||||
board = nodemcuv2
|
||||
build_flags =
|
||||
${com-esp.build_flags}
|
||||
board_build.flash_mode = dout
|
||||
|
||||
|
||||
[env:sonoff-basic-rfr3]
|
||||
platform = ${com.esp8266_platform}
|
||||
board = esp8285
|
||||
build_flags =
|
||||
${com-esp.build_flags}
|
||||
board_build.flash_mode = dout
|
||||
|
||||
[env:uno-rf]
|
||||
platform = ${com.atmelavr_platform}
|
||||
board = uno
|
||||
build_flags =
|
||||
${com-arduino-low-memory.build_flags}
|
||||
|
|
@ -710,7 +710,7 @@
|
|||
|
||||
//#define USE_WINDMETER // Add support for analog anemometer (+2k2 code)
|
||||
|
||||
//#define USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+3k2 code, 460 iram)
|
||||
//#define USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+2k7 code, 460 iram)
|
||||
|
||||
//#define USE_RF_SENSOR // Add support for RF sensor receiver (434MHz or 868MHz) (+0k8 code)
|
||||
// #define USE_THEO_V2 // Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver (+1k4 code)
|
||||
|
|
|
|||
Loading…
Reference in New Issue